@article{AryaFeldmannKopyshevetal.2020, author = {Arya, Pooja and Feldmann, David and Kopyshev, Alexey and Lomadze, Nino and Santer, Svetlana}, title = {Light driven guided and self-organized motion of mesoporous colloidal particles}, series = {Soft matter}, volume = {16}, journal = {Soft matter}, number = {5}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c9sm02068c}, pages = {1148 -- 1155}, year = {2020}, abstract = {We report on guided and self-organized motion of ensembles of mesoporous colloidal particles that can undergo dynamic aggregation or separation upon exposure to light. The forces on particles involve the phenomenon of light-driven diffusioosmosis (LDDO) and are hydrodynamic in nature. They can be made to act passively on the ensemble as a whole but also used to establish a mutual interaction between particles. The latter scenario requires a porous colloid morphology such that the particle can act as a source or sink of a photosensitive surfactant, which drives the LDDO process. The interplay between the two modes of operation leads to fascinating possibilities of dynamical organization and manipulation of colloidal ensembles adsorbed at solid-liquid interfaces. While the passive mode can be thought of to allow for a coarse structuring of a cloud of colloids, the inter-particle mode may be used to impose a fine structure on a 2D particle grid. Local flow is used to impose and tailor interparticle interactions allowing for much larger interaction distances that can be achieved with, e.g., DLVO type of forces, and is much more versatile.}, language = {en} } @article{AryaJelkenFeldmannetal.2020, author = {Arya, Pooja and Jelken, Joachim and Feldmann, David and Lomadze, Nino and Santer, Svetlana}, title = {Light driven diffusioosmotic repulsion and attraction of colloidal particles}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, volume = {152}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, number = {19}, publisher = {American Institute of Physics}, address = {Melville, NY}, issn = {0021-9606}, doi = {10.1063/5.0007556}, pages = {10}, year = {2020}, abstract = {In this paper, we introduce the phenomenon of light driven diffusioosmotic long-range attraction and repulsion of porous particles under irradiation with UV light. The change in the inter-particle interaction potential is governed by flow patterns generated around single colloids and results in reversible aggregation or separation of the mesoporous silica particles that are trapped at a solid surface. The range of the interaction potential extends to several times the diameter of the particle and can be adjusted by varying the light intensity. The "fuel" of the process is a photosensitive surfactant undergoing photo-isomerization from a more hydrophobic trans-state to a rather hydrophilic cis-state. The surfactant has different adsorption affinities to the particles depending on the isomerization state. The trans-isomer, for example, tends to accumulate in the negatively charged pores of the particles, while the cis-isomer prefers to remain in the solution. This implies that when under UV irradiation cis-isomers are being formed within the pores, they tend to diffuse out readily and generate an excess concentration near the colloid's outer surface, ultimately resulting in the initiation of diffusioosmotic flow. The direction of the flow depends strongly on the dynamic redistribution of the fraction of trans- and cis-isomers near the colloids due to different kinetics of photo-isomerization within the pores as compared to the bulk. The unique feature of the mechanism discussed in the paper is that the long-range mutual repulsion but also the attraction can be tuned by convenient external optical stimuli such as intensity so that a broad variety of experimental situations for manipulation of a particle ensemble can be realized.}, language = {en} } @article{AryaJelkenLomadzeetal.2020, author = {Arya, Pooja and Jelken, Joachim and Lomadze, Nino and Santer, Svetlana and Bekir, Marek}, title = {Kinetics of photo-isomerization of azobenzene containing surfactants}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry}, volume = {152}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry}, number = {2}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/1.5135913}, pages = {10}, year = {2020}, abstract = {We report on photoisomerization kinetics of azobenzene containing surfactants in aqueous solution. The surfactant molecule consists of a positively charged trimethylammonium bromide head group, a hydrophobic spacer connecting via 6 to 10 CH2 groups to the azobenzene unit, and the hydrophobic tail of 1 and 3CH(2) groups. Under exposure to light, the azobenzene photoisomerizes from more stable trans- to metastable cis-state, which can be switched back either thermally in dark or by illumination with light of a longer wavelength. The surfactant isomerization is described by a kinetic model of a pseudo first order reaction approaching equilibrium, where the intensity controls the rate of isomerization until the equilibrated state. The rate constants of the trans-cis and cis-trans photoisomerization are calculated as a function of several parameters such as wavelength and intensity of light, the surfactant concentration, and the length of the hydrophobic tail. The thermal relaxation rate from cis- to trans-state is studied as well. The surfactant isomerization shows a different kinetic below and above the critical micellar concentration of the trans isomer due to steric hindrance within the densely packed micelle but does not depend on the spacer length.}, language = {en} } @article{BekirJelkenJungetal.2021, author = {Bekir, Marek and Jelken, Joachim and Jung, Se-Hyeong and Pich, Andrij and Pacholski, Claudia and Kopyshev, Alexey and Santer, Svetlana}, title = {Dual responsiveness of microgels induced by single light stimulus}, series = {Applied physics letters}, volume = {118}, journal = {Applied physics letters}, number = {9}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0003-6951}, doi = {10.1063/5.0036376}, pages = {6}, year = {2021}, abstract = {We report on the multiple response of microgels triggered by a single optical stimulus. Under irradiation, the volume of the microgels is reversibly switched by more than 20 times. The irradiation initiates two different processes: photo-isomerization of the photo-sensitive surfactant, which forms a complex with the anionic microgel, rendering it photo-responsive; and local heating due to a thermo-plasmonic effect within the structured gold layer on which the microgel is deposited. The photo-responsivity is related to the reversible accommodation/release of the photo-sensitive surfactant depending on its photo-isomerization state, while the thermo-sensitivity is intrinsically built in. We show that under exposure to green light, the thermo-plasmonic effect generates a local hot spot in the gold layer, resulting in the shrinkage of the microgel. This process competes with the simultaneous photo-induced swelling. Depending on the position of the laser spot, the spatiotemporal control of reversible particle shrinking/swelling with a predefined extent on a per-second base can be implemented.}, language = {en} } @article{BekirSharmaUmlandtetal.2022, author = {Bekir, Marek and Sharma, Anjali and Umlandt, Maren and Lomadze, Nino and Santer, Svetlana}, title = {How to make a surface act as a micropump}, series = {Advanced materials interfaces}, volume = {9}, journal = {Advanced materials interfaces}, number = {12}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {2196-7350}, doi = {10.1002/admi.202102395}, pages = {11}, year = {2022}, abstract = {In this paper, the phenomenon of light-driven diffusioosmotic (DO) long-range attractive and repulsive interactions between micro-sized objects trapped near a solid wall is investigated. The range of the DO flow extends several times the size of microparticles and can be adjusted to point towards or away from the particle by varying irradiation parameters such as intensity or wavelength of light. The "fuel" of the light-driven DO flow is a photosensitive surfactant which can be photo-isomerized between trans and cis-states. The trans-isomer tends to accumulate at the interface, while the cis-isomer prefers to stay in solution. In combination with a dissimilar photo-isomerization rate at the interface and in bulk, this yields a concentration gradient of the isomers around single particles resulting in local light-driven diffusioosmotic (l-LDDO) flow. Here, the extended analysis of the l-LDDO flow as a function of irradiation parameters by introducing time-dependent development of the concentration excess of isomers near the particle surface is presented. It is also demonstrated that the l-LDDO can be generated at any solid/liquid interface being more pronounced in the case of strongly absorbing material. This phenomenon has plenty of potential applications since it makes any type of surface act as a micropump.}, language = {en} } @article{DiFlorioBruendermannYadavallietal.2014, author = {Di Florio, G. and Bruendermann, E. and Yadavalli, Nataraja Sekhar and Santer, Svetlana and Havenith, Martina}, title = {Graphene multilayer as nanosized optical strain gauge for polymer surface relief gratings}, series = {Nano letters : a journal dedicated to nanoscience and nanotechnology}, volume = {14}, journal = {Nano letters : a journal dedicated to nanoscience and nanotechnology}, number = {10}, publisher = {American Chemical Society}, address = {Washington}, issn = {1530-6984}, doi = {10.1021/nl502631s}, pages = {5754 -- 5760}, year = {2014}, abstract = {In this paper, we show how graphene can be utilized as a nanoscopic probe in order to characterize local opto-mechanical forces generated within photosensitive azobenzene containing polymer films. Upon irradiation with light interference patterns, photosensitive films deform according to the spatial intensity variation, leading to the formation of periodic topographies such as surface relief gratings (SRG). The mechanical driving forces inscribing a pattern into the films are supposedly fairly large, because the deformation takes place without photofluidization; the polymer is in a glassy state throughout. However, until now there has been no attempt to characterize these forces by any means. The challenge here is that the forces vary locally on a nanometer scale. Here, we propose to use Raman analysis of the stretching of the graphene layer adsorbed on top of polymer film under deformation in order to probe the strength of the material transport spatially resolved. With the well-known mechanical properties of graphene, we can obtain lower bounds on the forces acting within the film. Upon the basis of our experimental results, we can deduce that the internal pressure in the film due to grating formation can exceed 1 GPa. The graphene-based nanoscopic gauge opens new possibilities to characterize opto-mechanical forces generated within photosensitive polymer films.}, language = {en} } @article{DiFlorioBruendermannYadavallietal.2014, author = {Di Florio, G. and Bruendermann, E. and Yadavalli, Nataraja Sekhar and Santer, Svetlana and Havenith, Martina}, title = {Confocal raman microscopy and AFM study of the interface between the photosensitive polymer layer and multilayer graphene}, series = {Soft materials}, volume = {12}, journal = {Soft materials}, publisher = {Taylor \& Francis Group}, address = {Philadelphia}, issn = {1539-445X}, doi = {10.1080/1539445X.2014.945040}, pages = {S98 -- S105}, year = {2014}, abstract = {In this paper we report on the interaction between photosensitive azobenzene-containing polymer films and on top adsorbed graphene multilayers. The photosensitive polymer film changes its topography under irradiation with light interference patterns according to their polarization distribution. The multilayer graphene follows the deformation of the polymer film and stretches accordingly. Using confocal Raman microspectroscopy we can detect the appearance of additional peaks in the Raman spectrum of the photosensitive polymer film upon irradiation indicating a molecular interaction at the interface between the graphene multilayer and the polymer matrix. Multi-component analysis of the specific Raman bands shows that the interaction involves the graphene rings and the aromatic rings of the azobenzenes causing the strong adhesion between the two materials.}, language = {en} } @article{DiFlorioBruendermannYadavallietal.2014, author = {Di Florio, Giuseppe and Bruendermann, Erik and Yadavalli, Nataraja Sekhar and Santer, Svetlana and Havenith, Martina}, title = {Polarized 3D Raman and nanoscale near-field optical microscopy of optically inscribed surface relief gratings: chromophore orientation in azo-doped polymer films}, series = {Soft matter}, volume = {10}, journal = {Soft matter}, number = {10}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c3sm51787j}, pages = {1544 -- 1554}, year = {2014}, abstract = {We have used polarized confocal Raman microspectroscopy and scanning near-field optical microscopy with a resolution of 60 nm to characterize photoinscribed grating structures of azobenzene doped polymer films on a glass support. Polarized Raman microscopy allowed determining the reorientation of the chromophores as a function of the grating phase and penetration depth of the inscribing laser in three dimensions. We found periodic patterns, which are not restricted to the surface alone, but appear also well below the surface in the bulk of the material. Near-field optical microscopy with nanoscale resolution revealed lateral two-dimensional optical contrast, which is not observable by atomic force and Raman microscopy.}, language = {en} } @misc{DiFlorioBruendermannYadavallietal.2013, author = {Di Florio, Giuseppe and Br{\"u}ndermann, Erik and Yadavalli, Nataraja Sekhar and Santer, Svetlana and Havenith, Martina}, title = {Polarized 3D Raman and nanoscale near-field optical microscopy of optically inscribed surface relief gratings}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-95233}, pages = {1544 -- 1554}, year = {2013}, abstract = {We have used polarized confocal Raman microspectroscopy and scanning near-field optical microscopy with a resolution of 60 nm to characterize photoinscribed grating structures of azobenzene doped polymer films on a glass support. Polarized Raman microscopy allowed determining the reorientation of the chromophores as a function of the grating phase and penetration depth of the inscribing laser in three dimensions. We found periodic patterns, which are not restricted to the surface alone, but appear also well below the surface in the bulk of the material. Near-field optical microscopy with nanoscale resolution revealed lateral two-dimensional optical contrast, which is not observable by atomic force and Raman microscopy.}, language = {en} } @article{DiFlorioBruendermannYadavalletal.2014, author = {DiFlorio, Giuseppe and Br{\"u}ndermann, Erik and Yadavall, Nataraja Sekhar and Santer, Svetlana and Havenith, Martina}, title = {Polarized 3D Raman and nanoscale near-field optical microscopy of optically inscribed surface relief gratings: chromophore orientation in azo-doped polymer films}, issn = {1744-683x}, doi = {10.1039/c3sm51787j}, year = {2014}, abstract = {We have used polarized confocal Raman microspectroscopy and scanning near-field optical microscopy with a resolution of 60 nm to characterize photoinscribed grating structures of azobenzene doped polymer films on a glass support. Polarized Raman microscopy allowed determining the reorientation of the chromophores as a function of the grating phase and penetration depth of the inscribing laser in three dimensions. We found periodic patterns, which are not restricted to the surface alone, but appear also well below the surface in the bulk of the material. Near-field optical microscopy with nanoscale resolution revealed lateral two-dimensional optical contrast, which is not observable by atomic force and Raman microscopy.}, language = {en} } @article{FeldmannAryaLomadzeetal.2019, author = {Feldmann, David and Arya, Pooja and Lomadze, Nino and Kopyshev, Alexey and Santer, Svetlana}, title = {Light-driven motion of self-propelled porous Janus particles}, series = {Applied physics letters}, volume = {115}, journal = {Applied physics letters}, number = {26}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0003-6951}, doi = {10.1063/1.5129238}, pages = {5}, year = {2019}, abstract = {We introduce a versatile mechanism of light-driven self-propelled motion applied to porous Janus-type particles. The mechanism is based on the generation of local light-driven diffusio-osmotic (l-LDDO) flow around each single porous particle subjected to suitable irradiation conditions. The photosensitivity is introduced by a cationic azobenzene containing surfactant, which undergoes a photoisomerization reaction from a more hydrophobic trans-state to a rather hydrophilic cis-state under illumination with light. The negatively charged porous silica particles are dispersed in a corresponding aqueous solution and absorb molecules in their trans-state but expel them in their cis-state. During illumination with blue light triggering both trans-cis and cis-trans isomerization at the same time, the colloids start to move due to the generation of a steady-state diffusive flow of cis-isomers out of and trans-isomers into the particle. This is because a hemi-spherical metal cap partially sealing the colloid breaks the symmetry of the otherwise radially directed local flow around the particle, leading to self-propelled motion. Janus particles exhibit superdiffusive motion with a velocity of similar to 0.5 mu m/s and a persistence length of ca. 50 mu m, confined to microchannels the direction can be maintained up to 300 mu m before rotational diffusion reverts it. Particles forming dimers of different shapes can be made to travel along circular trajectories. The unique feature of this mechanism is that the strength of self-propulsion can be tuned by convenient external optical stimuli (intensity and irradiation wavelength) such that a broad variety of experimental situations can be realized in a spatiotemporal way and in situ.}, language = {en} } @article{FeldmannMaduarSanteretal.2016, author = {Feldmann, David and Maduar, Salim R. and Santer, Mark and Lomadze, Nino and Vinogradova, Olga I. and Santer, Svetlana}, title = {Manipulation of small particles at solid liquid interface: light driven diffusioosmosis}, series = {Scientific reports}, volume = {6}, journal = {Scientific reports}, publisher = {Nature Publ. Group}, address = {London}, issn = {2045-2322}, doi = {10.1038/srep36443}, pages = {25083 -- 25091}, year = {2016}, abstract = {The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans-and cis-isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area.}, language = {en} } @article{FeldmannMaduarSanteretal.2016, author = {Feldmann, David and Maduar, Salim R. and Santer, Mark and Lomadze, Nino and Vinogradova, Olga I. and Santer, Svetlana}, title = {Manipulation of small particles at solid liquid interface}, series = {Scientific reports}, volume = {6}, journal = {Scientific reports}, publisher = {Nature Publishing Group}, address = {London}, issn = {2045-2322}, doi = {10.1038/srep36443}, pages = {10}, year = {2016}, abstract = {The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area.}, language = {en} } @misc{FeldmannMaduarSanteretal.2016, author = {Feldmann, David and Maduar, Salim R. and Santer, Mark and Lomadze, Nino and Vinogradova, Olga I. and Santer, Svetlana}, title = {Manipulation of small particles at solid liquid interface}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-100338}, pages = {10}, year = {2016}, abstract = {The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area.}, language = {en} } @article{FilimonKopfBalloutetal.2010, author = {Filimon, Marlena and Kopf, Ilona and Ballout, Fuad and Schmidt, Dietrich A. and Bruendermann, Erik and R{\"u}he, J{\"u}rgen and Santer, Svetlana and Havenith, Martina}, title = {Smart polymer surfaces : mapping chemical landscapes on the nanometre scale}, issn = {1744-683X}, doi = {10.1039/C0sm00098a}, year = {2010}, abstract = {We show that Scattering Infrared Near-field Microscopy (SNIM) allows chemical mapping of polymer monolayers that can serve as designed nanostructured surfaces with specific surface chemistry properties on a nm scale. Using s- SNIM a minimum volume of 100 nm x 100 nm x 15 nm is sufficient for a recording of a "chemical'' IR signature which corresponds to an enhancement of at least four orders of magnitudes compared to conventional FT-IR microscopy. We could prove that even in cases where it is essentially difficult to distinguish between distinct polymer compositions based solely on topography, nanophase separated polymers can be clearly distinguished according to their characteristic near-field IR response.}, language = {en} } @article{FilimonKopfSchmidtetal.2011, author = {Filimon, Marlena and Kopf, Ilona and Schmidt, Dietrich A. and Bruendermann, Erik and R{\"u}he, J{\"u}rgen and Santer, Svetlana and Havenith, Martina}, title = {Local chemical composition of nanophase-separated polymer brushes}, series = {Physical chemistry, chemical physics : a journal of European Chemical Societies}, volume = {13}, journal = {Physical chemistry, chemical physics : a journal of European Chemical Societies}, number = {24}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1463-9076}, doi = {10.1039/c0cp02756a}, pages = {11620 -- 11626}, year = {2011}, abstract = {Using scattering scanning nearfield infrared microscopy (s-SNIM), we have imaged the nanoscale phase separation of mixed polystyrene-poly(methyl methacrylate) (PS-PMMA) brushes and investigated changes in the top layer as a function of solvent exposure. We deduce that the top-layer of the mixed brushes is composed primarily of PMMA after exposure to acetone, while after exposure to toluene this changes to PS. Access to simultaneously measured topographic and chemical information allows direct correlation of the chemical morphology of the sample with topographic information. Our results demonstrate the potential of s-SNIM for chemical mapping based on distinct infrared absorption properties of polymers with a high spatial resolution of 80 nm x 80 nm.}, language = {en} } @article{FrenkelAryaBormashenḳoetal.2021, author = {Frenkel, Mark and Arya, Pooja and Bormashenḳo, Edṿard and Santer, Svetlana}, title = {Quantification of ordering in active light driven colloids}, series = {Journal of colloid and interface science}, volume = {586}, journal = {Journal of colloid and interface science}, publisher = {Elsevier}, address = {San Diego}, issn = {0021-9797}, doi = {10.1016/j.jcis.2020.10.053}, pages = {866 -- 875}, year = {2021}, abstract = {Hypothesis: Light driven diffusioosmosis allows for the controlled self-assembly of colloidal particles. Illuminating of colloidal suspensions built of nanoporous silica microspheres dispersed in aqueous solution containing photosensitive azobenzene cationic surfactant enables manufacturing self-assembled well-ordered 2D colloidal patterns. We conjectured that ordering in this patterns may be quantified with the Voronoi entropy. Experiments: Depending on the isomerization state the surfactant either tends to absorb (trans-state) into negatively charged pores or diffuse out (cis-isomer) of the particles generating an excess concentration near the colloids outer surface and thus resulting in the initiation of diffusioosmotic flow. The direction of the flow can be controlled by the wavelength and intensity of irradiation. Under irradiations with blue light the colloids separate within a few seconds forming equidistant particle ensemble where long range diffusioosmotic repulsion acts over distances exceeding several times the particle diameter. Hierarchy of ordering in the studied colloidal systems is distinguished, namely: i) ordering of individual separated colloidal particles; ii) ordering of clusters built of colloidal particles; iii) ordering within clusters of individual colloidal particles. Findings: The study of the temporal change in the Voronoi entropy for the light illuminated colloidal dispersions allowed quantification of ordering evolution on different lateral scales and under different irradiation conditions. Fourier analysis of the time evolution of the Voronoi entropy is presented. Fourier spectrum of the "small-area" (100 x 100 mu m) reveals the pronounced peak at f = 1.125 Hz reflecting the oscillations of individual particles at this frequency. Ordering in hierarchical colloidal system emerging on different lateral scales is addressed. The minimal Voronoi entropy is intrinsic for the close packed 2D clusters. (C) 2020 Published by Elsevier Inc.}, language = {en} } @article{JelkenHenkelSanter2020, author = {Jelken, Joachim and Henkel, Carsten and Santer, Svetlana}, title = {Polarization controlled fine structure of diffraction spots from an optically induced grating}, series = {Applied physics letters}, volume = {116}, journal = {Applied physics letters}, number = {5}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0003-6951}, doi = {10.1063/1.5140067}, pages = {4}, year = {2020}, abstract = {We report on the remote control of the fine structure of a diffraction spot from optically induced dual gratings within a photosensitive polymer film. The material contains azobenzene in the polymer side chains and develops a surface relief under two-beam holographic irradiation. The diffraction of a polarized probe beam is sensitive to the orientation of the azobenzene groups forming a permanently stored birefringence grating within the film. We demonstrate that the fine structure of the probe diffraction spot switches from a Gaussian to a hollow or a hollow to a "Saturn"-like structure by a change in polarization. This makes it potentially useful in photonic devices because the beam shape can be easily inverted by an external stimulus.}, language = {en} } @article{JelkenHenkelSanter2019, author = {Jelken, Joachim and Henkel, Carsten and Santer, Svetlana}, title = {Solving an old puzzle: fine structure of diffraction spots from an azo-polymer surface relief grating}, series = {Applied physics : B, Lasers and optics}, volume = {125}, journal = {Applied physics : B, Lasers and optics}, number = {11}, publisher = {Springer}, address = {Heidelberg}, issn = {0946-2171}, doi = {10.1007/s00340-019-7331-8}, pages = {11}, year = {2019}, abstract = {We report on the experimental and theoretical interpretation of the diffraction of a probe beam during inscription of a surface relief grating with an interference pattern into a photo-responsive polymer film. For this, we developed a set-up allowing for the simultaneous recording of the diffraction efficiency (DE), the fine structure of the diffraction spot and the topographical changes, in situ and in real time while the film is irradiated. The time dependence of the DE, as the surface relief deepens, follows a Bessel function exhibiting maxima and minima. The size of the probe beam relative to the inscribed grating (i.e., to the size of the writing beams) matters and has to be considered for the interpretation of the DE signal. It is also at the origin of a fine structure within the diffraction spot where ring-shaped features appear once an irradiation time corresponding to the first maximum of the DE has been exceeded.}, language = {en} } @article{JelkenHenkelSanter2020, author = {Jelken, Joachim and Henkel, Carsten and Santer, Svetlana}, title = {Formation of half-period surface relief gratings in azobenzene containing polymer films}, series = {Applied physics : B, Lasers and optics}, volume = {126}, journal = {Applied physics : B, Lasers and optics}, number = {9}, publisher = {Springer}, address = {Heidelberg}, issn = {0946-2171}, doi = {10.1007/s00340-020-07500-w}, pages = {14}, year = {2020}, abstract = {We study the peculiar response of photo-sensitive polymer films irradiated with a certain type of interference pattern where one interfering beam is S-polarized, while the second one is P-polarized. The polymer film, although in a glassy state, deforms following the local polarization distribution of the incident light, and a surface relief grating (SRG) appears whose period is half the optical one. All other types of interference patterns result in the matching of both periods. The topographical response is triggered by the alignment of photo-responsive azobenzene containing polymer side chains orthogonal to the local electrical field, resulting in a bulk birefringence grating (BBG). We investigate the process of dual grating formation (SRG and BBG) in a polymer film utilizing a dedicated set-up that combines probe beam diffraction and atomic force microscopy (AFM) measurements, and permits acquiring in situ and in real-time information about changes in local topography and birefringence. We find that the SRG maxima appear at the positions of linearly polarized light (tilted by 45 degrees relative to the grating vector), causing the formation of the half-period topography. This permits to inscribe symmetric and asymmetric topography gratings with sub-wavelength period, while changing only slightly the polarization of one of the interfering beams. We demonstrate an easy generation of sawtooth profiles (blazed gratings) with adjustable shape. With these results, we have taken a significant step in understanding the photo-induced deformation of azo-polymer films.}, language = {en} }