@misc{SchneiderGuenterTaubert2018,
  author    = {Schneider, Matthias and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1057},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-47442},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-474427},
  pages     = {21},
  year      = {2018},
  abstract  = {The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.},
  language  = {en}
}
@article{SchneiderGuenterTaubert2018,
  author    = {Schneider, Matthias and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating},
  series = {Polymers},
  volume    = {10},
  journal   = {Polymers},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  doi       = {10.3390/polym10030275},
  pages     = {19},
  year      = {2018},
  abstract  = {The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.},
  language  = {en}
}
@article{SchneiderFritzschePuciulMalinowskaetal.2020,
  author    = {Schneider, Matthias and Fritzsche, Nora and Puciul-Malinowska, Agnieszka and Baliś, Andrzej and Mostafa, Amr and Bald, Ilko and Zapotoczny, Szczepan and Taubert, Andreas},
  title     = {Surface etching of 3D printed poly(lactic acid) with NaOH},
  series = {Polymers},
  volume    = {12},
  journal   = {Polymers},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  doi       = {10.3390/polym12081711},
  pages     = {16},
  year      = {2020},
  abstract  = {The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.},
  language  = {en}
}
@misc{SchneiderFritzschePuciulMalinowskaetal.2020,
  author    = {Schneider, Matthias and Fritzsche, Nora and Puciul-Malinowska, Agnieszka and Balis, Andrzej and Mostafa, Amr and Bald, Ilko and Zapotoczny, Szczepan and Taubert, Andreas},
  title     = {Surface etching of 3D printed poly(lactic acid) with NaOH: a systematic approach},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {8},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-52508},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525088},
  pages     = {18},
  year      = {2020},
  abstract  = {The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.},
  language  = {en}
}
@article{SchneiderFritzschePuciulMalinowskaetal.2020,
  author    = {Schneider, Matthias and Fritzsche, Nora and Puciul-Malinowska, Agnieszka and Balis, Andrzej and Mostafa, Amr and Bald, Ilko and Zapotoczny, Szczepan and Taubert, Andreas},
  title     = {Surface etching of 3D printed poly(lactic acid) with NaOH: a systematic approach},
  series = {Polymers},
  volume    = {12},
  journal   = {Polymers},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  pages     = {16},
  year      = {2020},
  abstract  = {The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.},
  language  = {en}
}
@book{Schneider2023,
  author    = {Schneider, Matthias},
  title     = {M{\"a}nnlichkeit und Flucht},
  publisher = {Springer VS},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41766-6},
  doi       = {10.1007/978-3-658-41767-3},
  pages     = {XIII, 341},
  year      = {2023},
  abstract  = {Dieses Buch bietet Einsicht in das komplexe Verh{\"a}ltnis von M{\"a}nnlichkeit und Flucht. Anhand von biographischen Interviews zeigt es, welche Konstruktionen von Geschlecht bei M{\"a}nnern vom Leben in Eritrea, {\"u}ber die Flucht durch den Sudan und Libyen bis zum Ankommen in Deutschland von Bedeutung sind. In der Geschlechter- und Fluchtforschung lag mehrere Jahrzehnte der Fokus auf dem Leben gefl{\"u}chteter M{\"a}dchen und Frauen. M{\"a}nner kamen meist nur als T{\"a}ter geschlechtsbasierter Gewalt vor. Inzwischen existieren zwar einige Arbeiten {\"u}ber das Leben von gefl{\"u}chteten M{\"a}nnern, allerdings wird meist nur das Leben im Ankunftskontext betrachtet und M{\"a}nnlichkeit im Singular gedacht. Flucht erscheint so als eine Marginalisierung von M{\"a}nnlichkeit. Dass dieses Verh{\"a}ltnis allerdings weitaus komplexer ist und vielf{\"a}ltige M{\"a}nnlichkeiten in unterschiedlichen Beziehungen zu Flucht stehen, ist die zentrale Erkenntnis dieser Arbeit.},
  language  = {de}
}
@misc{LoeckmannSchneider2022,
  author    = {L{\"o}ckmann, Teresa and Schneider, Matthias},
  title     = {Geschlechtergerechtigkeit im Verbraucher_innenschutz?},
  series = {Genderblog},
  journal   = {Genderblog},
  publisher = {Zentrum f{\"u}r transdisziplin{\"a}re Geschlechterstudien an der Humboldt-Universit{\"a}t zu Berlin},
  address   = {Berlin},
  year      = {2022},
  language  = {de}
}