@article{ZakrevskyyTitovLomadzeetal.2014, author = {Zakrevskyy, Yuriy and Titov, Evgenii and Lomadze, Nino and Santer, Svetlana}, title = {Phase diagrams of DNA-photosensitive surfactant complexes: Effect of ionic strength and surfactant structure}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, volume = {141}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, number = {16}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/1.4899281}, pages = {8}, year = {2014}, abstract = {Realization of all-optically controlled and efficient DNA compaction is the major motivation in the study of interactions between DNA and photosensitive surfactants. In this article, using recently published approach of phase diagram construction [Y. Zakrevskyy, P. Cywinski, M. Cywinska, J. Paasche, N. Lomadze, O. Reich, H.-G. Lohmannsroben, and S. Santer, J. Chem. Phys. 140, 044907 (2014)], a strategy for substantial reduction of compaction agent concentration and simultaneous maintaining the light-induced decompaction efficiency is proposed. The role of ionic strength (NaCl concentration), as a very important environmental parameter, and surfactant structure (spacer length) on the changes of positions of phase transitions is investigated. Increase of ionic strength leads to increase of the surfactant concentration needed to compact DNA molecule. However, elongation of the spacer results to substantial reduction of this concentration. DNA compaction by surfactants with longer tails starts to take place in diluted solutions at charge ratios Z < 1 and is driven by azobenzene-aggregation compaction mechanism, which is responsible for efficient decompaction. Comparison of phase diagrams for different DNA-photosensitive surfactant systems allowed explanation and proposal of a strategy to overcome previously reported limitations of the light-induced decompaction for complexes with increasing surfactant hydrophobicity. (C) 2014 AIP Publishing LLC.}, language = {en} } @article{ZakrevskyyRoxlauBrezesinskietal.2014, author = {Zakrevskyy, Yuriy and Roxlau, Julian and Brezesinski, Gerald and Lomadze, Nino and Santer, Svetlana}, title = {Photosensitive surfactants: Micellization and interaction with DNA}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, volume = {140}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, number = {4}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/1.4862678}, pages = {8}, year = {2014}, abstract = {Recently, photosensitive surfactants have re-attracted considerable attention. It has been shown that their association with oppositely charged biologically important polyelectrolytes, such as DNA or microgels, can be efficiently manipulated simply by light exposure. In this article, we investigate the self-assembly of photosensitive surfactants as well as their interactions with DNA by calorimetric and spectroscopic methods. Critical micelle concentration (CMC), standard micellization enthalpy, entropy, and Gibbs energy were determined in different conditions (ionic strengths and temperatures) for a series of cationic surfactants with an azobenzene group in their tail. It is shown, that aggregation forces of photosensitive units play an important role in the micellization giving the major contribution to the micellization enthalpy. The onset of the aggregation can be traced from shift of the absorption peak position in the UV-visible spectrum. Titration UV-visible spectroscopy is used as an alternative, simple, and sensitive approach to estimate CMC. The titration UV-visible spectroscopy was also employed to investigate interactions (CAC: critical aggregation concentration, precipitation, and colloidal stabilization) in the DNA-surfactant complex.}, language = {en} } @article{ZakrevskyyRichterZakrevskaetal.2012, author = {Zakrevskyy, Yuriy and Richter, Marcel and Zakrevska, Svitlana and Lomadze, Nino and von Klitzing, Regine and Santer, Svetlana}, title = {Light-controlled reversible manipulation of microgel particle size using azobenzene-containing surfactant}, series = {Advanced functional materials}, volume = {22}, journal = {Advanced functional materials}, number = {23}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1616-301X}, doi = {10.1002/adfm.201200617}, pages = {5000 -- 5009}, year = {2012}, abstract = {The light-induced reversible switching of the swelling of microgel particles triggered by photo-isomerization and binding/unbinding of a photosensitive azobenzene-containing surfactant is reported. The interactions between the microgel (N-isopropylacrylamide, co-monomer: allyl acetic acid, crosslinker: N,N'-methylenebisacrylamide) and the surfactant are studied by UV-Vis spectroscopy, dynamic and electrophoretic light scattering measurements. Addition of the surfactant above a critical concentration leads to contraction/collapse of the microgel. UV light irradiation results in trans-cis isomerization of the azobenzene unit incorporated into the surfactant tail and causes an unbinding of the more hydrophilic cis isomer from the microgel and its reversible swelling. The reversible contraction can be realized by blue light irradiation that transfers the surfactant back to the more hydrophobic trans conformation, in which it binds to the microgel. The phase diagram of the surfactant-microgel interaction and transitions (aggregation, contraction, and precipitation) is constructed and allows prediction of changes in the system when the concentration of one or both components is varied. Remote and reversible switching between different states can be realized by either UV or visible light irradiation.}, language = {en} } @article{ZakrevskyyKopyshevLomadzeetal.2011, author = {Zakrevskyy, Yuriy and Kopyshev, Alexey and Lomadze, Nino and Morozova, Elena and Lysyakova, Liudmila and Kasyanenko, Nina and Santer, Svetlana}, title = {DNA compaction by azobenzene-containing surfactant}, series = {Physical review : E, Statistical, nonlinear and soft matter physics}, volume = {84}, journal = {Physical review : E, Statistical, nonlinear and soft matter physics}, number = {2}, publisher = {American Physical Society}, address = {College Park}, issn = {1539-3755}, doi = {10.1103/PhysRevE.84.021909}, pages = {9}, year = {2011}, abstract = {We report on the interaction of cationic azobenzene-containing surfactant with DNA investigated by absorption and fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy. The properties of the surfactant can be controlled with light by reversible switching of the azobenzene unit, incorporated into the surfactant tail, between a hydrophobic trans (visible irradiation) and a hydrophilic cis (UV irradiation) configuration. The influence of the trans-cis isomerization of the azobenzene on the compaction process of DNA molecules and the role of both isomers in the formation and colloidal stability of DNA-surfactant complexes is discussed. It is shown that the trans isomer plays a major role in the DNA compaction process. The influence of the cis isomer on the DNA coil configuration is rather small. The construction of a phase diagram of the DNA concentration versus surfactant/DNA charge ratio allows distancing between three major phases: colloidally stable and unstable compacted globules, and extended coil conformation. There is a critical concentration of DNA above which the compacted globules can be hindered from aggregation and precipitation by adding an appropriate amount of the surfactant in the trans configuration. This is because of the compensation of hydrophobicity of the globules with an increasing amount of the surfactant. Below the critical DNA concentration, the compacted globules are colloidally stable and can be reversibly transferred with light to an extended coil state.}, language = {en} } @article{ZakrevskyyCywinskiCywinskaetal.2014, author = {Zakrevskyy, Yuriy and Cywinski, Piotr and Cywinska, Magdalena and Paasche, Jens and Lomadze, Nino and Reich, Oliver and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Santer, Svetlana}, title = {Interaction of photosensitive surfactant with DNA and poly acrylic acid}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, volume = {140}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, number = {4}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/1.4862679}, pages = {8}, year = {2014}, language = {en} } @article{YadavalliSaphiannikovaSanter2014, author = {Yadavalli, Nataraja Sekhar and Saphiannikova, Marina and Santer, Svetlana}, title = {Photosensitive response of azobenzene containing films towards pure intensity or polarization interference patterns}, series = {Applied physics letters}, volume = {105}, journal = {Applied physics letters}, number = {5}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0003-6951}, doi = {10.1063/1.4891615}, pages = {5}, year = {2014}, abstract = {In this paper, we report on differences in the response of photosensitive azobenzene containing films upon irradiation with the intensity or polarization interference patterns. Two materials are studied differing in the molecular weight: an azobenzene-containing polymer and a molecular glass formed from a much smaller molecule consisting of three connected azobenzene units. Topography changes occurring along with the changes in irradiation conditions are recorded using a homemade set-up combining an optical part for generation and shaping of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. In this way, we could reveal the unique behavior of photosensitive materials during the first few minutes of irradiation: the change in topography is initially driven by an increase in the azobenzene free volume along with the transcis isomerization, followed by the mass transport finally resulting in the surface relief grating. This study demonstrates the great potential of our setup to experimentally highlight puzzling processes governing the formation of surface relief gratings. (C) 2014 AIP Publishing LLC.}, language = {en} } @article{YadavalliSaphiannikovaLomadzeetal.2013, author = {Yadavalli, Nataraja Sekhar and Saphiannikova, Marina and Lomadze, Nino and Goldenberg, Leonid M. and Santer, Svetlana}, title = {Structuring of photosensitive material below diffraction limit using far field irradiation}, series = {Applied physics : A, Materials science \& processing}, volume = {113}, journal = {Applied physics : A, Materials science \& processing}, number = {2}, publisher = {Springer}, address = {New York}, issn = {0947-8396}, doi = {10.1007/s00339-013-7945-3}, pages = {263 -- 272}, year = {2013}, abstract = {In this paper, we report on in-situ atomic force microscopy (AFM) studies of topographical changes in azobenzene-containing photosensitive polymer films that are irradiated with light interference patterns. We have developed an experimental setup consisting of an AFM combined with two-beam interferometry that permits us to switch between different polarization states of the two interfering beams while scanning the illuminated area of the polymer film, acquiring corresponding changes in topography in-situ. This way, we are able to analyze how the change in topography is related to the variation of the electrical field vector within the interference pattern. It is for the first time that with a rather simple experimental approach a rigorous assignment can be achieved. By performing in-situ measurements we found that for a certain polarization combination of two interfering beams [namely for the SP (a dagger center dot, a dagger") polarization pattern] the topography forms surface relief grating with only half the period of the interference patterns. Exploiting this phenomenon we are able to fabricate surface relief structures with characteristic features measuring only 140 nm, by using far field optics with a wavelength of 491 nm. We believe that this relatively simple method could be extremely valuable to, for instance, produce structural features below the diffraction limit at high-throughput, and this could significantly contribute to the search of new fabrication strategies in electronics and photonics industry.}, language = {en} } @article{YadavalliSanter2013, author = {Yadavalli, Nataraja Sekhar and Santer, Svetlana}, title = {In-situ atomic force microscopy study of the mechanism of surface relief grating formation in photosensitive polymer films}, series = {Journal of applied physics}, volume = {113}, journal = {Journal of applied physics}, number = {22}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-8979}, doi = {10.1063/1.4809640}, pages = {12}, year = {2013}, abstract = {When photosensitive azobenzene-containing polymer films are irradiated with light interference patterns, topographic variations in the film develop that follow the local distribution of the electric field vector. The exact correspondence of e.g., the vector orientation in relation to the presence of local topographic minima or maxima is in general difficult to determine. Here, we report on a systematic procedure how this can be accomplished. For this, we devise a new set-up combining an atomic force microscope and two-beam interferometry. With this set-up, it is possible to track the topography change in-situ, while at the same time changing polarization and phase of the impinging interference pattern. This is the first time that an absolute correspondence between the local distribution of electric field vectors and the local topography of the relief grating could be established exhaustively. Our setup does not require a complex mathematical post-processing and its simplicity renders it interesting for characterizing photosensitive polymer films in general.}, language = {en} } @misc{YadavalliLoebnerPapkeetal.2018, author = {Yadavalli, Nataraja Sekhar and Loebner, Sarah and Papke, Thomas and Sava, Elena and Hurduc, Nicolae and Santer, Svetlana}, title = {A comparative study of photoinduced deformation in azobenzene containing polymer films}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {458}, issn = {1866-8372}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-413510}, year = {2018}, abstract = {In this paper two groups supporting different views on the mechanism of light induced polymer deformation argue about the respective underlying theoretical conceptions, in order to bring this interesting debate to the attention of the scientific community. The group of Prof. Nicolae Hurduc supports the model claiming that the cyclic isomerization of azobenzenes may cause an athermal transition of the glassy azobenzene containing polymer into a fluid state, the so-called photo-fluidization concept. This concept is quite convenient for an intuitive understanding of the deformation process as an anisotropic flow of the polymer material. The group of Prof. Svetlana Santer supports the re-orientational model where the mass-transport of the polymer material accomplished during polymer deformation is stated to be generated by the light-induced re-orientation of the azobenzene side chains and as a consequence of the polymer backbone that in turn results in local mechanical stress, which is enough to irreversibly deform an azobenzene containing material even in the glassy state. For the debate we chose three polymers differing in the glass transition temperature, 32 °C, 87 °C and 95 °C, representing extreme cases of flexible and rigid materials. Polymer film deformation occurring during irradiation with different interference patterns is recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. We also demonstrated the unique behaviour of azobenzene containing polymeric films to switch the topography in situ and reversibly by changing the irradiation conditions. We discuss the results of reversible deformation of three polymers induced by irradiation with intensity (IIP) and polarization (PIP) interference patterns, and the light of homogeneous intensity in terms of two approaches: the re-orientational and the photo-fluidization concepts. Both agree in that the formation of opto-mechanically induced stresses is a necessary prerequisite for the process of deformation. Using this argument, the deformation process can be characterized either as a flow or mass transport.}, language = {en} } @article{YadavalliLoebnerPapkeetal.2016, author = {Yadavalli, Nataraja Sekhar and Loebner, Sarah and Papke, Thomas and Sava, Elena and Hurduc, Nicolae and Santer, Svetlana}, title = {A comparative study of photoinduced deformation in azobenzene containing polymer films}, series = {Soft matter}, volume = {12}, journal = {Soft matter}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c6sm00029k}, pages = {2593 -- 2603}, year = {2016}, abstract = {In this paper two groups supporting different views on the mechanism of light induced polymer deformation argue about the respective underlying theoretical conceptions, in order to bring this interesting debate to the attention of the scientific community. The group of Prof. Nicolae Hurduc supports the model claiming that the cyclic isomerization of azobenzenes may cause an athermal transition of the glassy azobenzene containing polymer into a fluid state, the so-called photo-fluidization concept. This concept is quite convenient for an intuitive understanding of the deformation process as an anisotropic flow of the polymer material. The group of Prof. Svetlana Santer supports the re-orientational model where the mass-transport of the polymer material accomplished during polymer deformation is stated to be generated by the light-induced re-orientation of the azobenzene side chains and as a consequence of the polymer backbone that in turn results in local mechanical stress, which is enough to irreversibly deform an azobenzene containing material even in the glassy state. For the debate we chose three polymers differing in the glass transition temperature, 32 degrees C, 87 degrees C and 95 degrees C, representing extreme cases of flexible and rigid materials. Polymer film deformation occurring during irradiation with different interference patterns is recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. We also demonstrated the unique behaviour of azobenzene containing polymeric films to switch the topography in situ and reversibly by changing the irradiation conditions. We discuss the results of reversible deformation of three polymers induced by irradiation with intensity (IIP) and polarization (PIP) interference patterns, and the light of homogeneous intensity in terms of two approaches: the re-orientational and the photo-fluidization concepts. Both agree in that the formation of opto-mechanically induced stresses is a necessary prerequisite for the process of deformation. Using this argument, the deformation process can be characterized either as a flow or mass transport.}, language = {en} } @article{YadavalliLindeKopyshevetal.2013, author = {Yadavalli, Nataraja Sekhar and Linde, Felix and Kopyshev, Alexey and Santer, Svetlana}, title = {Soft matter beats hard matter - rupturing of thin metallic films induced by mass transport in photosensitive polymer films}, series = {ACS applied materials \& interfaces}, volume = {5}, journal = {ACS applied materials \& interfaces}, number = {16}, publisher = {American Chemical Society}, address = {Washington}, issn = {1944-8244}, doi = {10.1021/am4006132w}, pages = {7743 -- 7747}, year = {2013}, abstract = {The interface between thin films of metal and polymer materials play a significant role in modern flexible microelectronics viz., metal contacts on polymer substrates, printed electronics and prosthetic devices. The major emphasis in metal polymer interface is on studying how the externally applied stress in the polymer substrate leads to the deformation and cracks in metal film and vice versa. Usually, the deformation process involves strains varying over large lateral dimensions because of excessive stress at local imperfections. Here we show that the seemingly random phenomena at macroscopic scales can be rendered rather controllable at submicrometer length scales. Recently, we have created a metal polymer interface system with strains varying over periods of several hundred nanometers. This was achieved by exploiting the formation of surface relief grating (SRG) within the azobenzene containing photosensitive polymer film upon irradiation with light interference pattern. Up to a thickness of 60 nm, the adsorbed metal film adapts neatly to the forming relief, until it ultimately ruptures into an array of stripes by formation of highly regular and uniform cracks along the maxima and minima of the polymer topography. This surprising phenomenon has far-reaching implications. This is the first time a direct probe is available to estimate the forces emerging in SRG formation in glassy polymers. Furthermore, crack formation in thin metal films can be studied literally in slow motion, which could lead to substantial improvements in the design process of flexible electronics. Finally, cracks are produced uniformly and at high density, contrary to common sense. This could offer new strategies for precise nanofabrication procedures mechanical in character.}, language = {en} } @article{YadavalliKoenigSanter2015, author = {Yadavalli, Nataraja Sekhar and K{\"o}nig, Tobias and Santer, Svetlana}, title = {Selective mass transport of azobenzene-containing photosensitive films towards or away from the light intensity}, series = {Journal of the Society for Information Display}, volume = {23}, journal = {Journal of the Society for Information Display}, number = {4}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {1071-0922}, doi = {10.1002/jsid.306}, pages = {154 -- 162}, year = {2015}, abstract = {Here, we report on two photosensitive amorphous polymers showing opposite behavior upon exposure to illumination. The first polymer (PAZO) consists of linear backbone to which azobenzene-containing side chains are covalently attached, while in the second polymer (azo-PEI), the azobenzene side chains are attached ionically to a polyelectrolyte backbone. When irradiated through a mask, the PAZO goes away from the intensity maxima, leaving behind topography trenches, while the direction of the mass transport of the azo-PEI polymer points towards the intensity maxima. This kind of behavior has been reported only for certain liquid crystalline polymers that exhibit in-phase reaction on illumination, that is, topography maxima coincides with the intensity maxima. Furthermore, flat nanocrystals placed on top of azo-PEI film was found to be moved together with the mass transport of the underlying polymer film as visualized using in situ atomic force microscopy (AFM) measurements. It was also demonstrated that the two polymer films respond differently on irradiation with the polarization and intensity interference patterns (IPs). To record the kinetic of the surface relief grating formation within two polymers during irradiation with different IPs, we utilized a homemade setup combining the optical part for the generation of IP and AFM. A possible mechanism explaining different responses on the irradiation of amorphous polymers is discussed in the frame of a theoretical model proposed by Saphiannikova et al. (J. Phys. Chem. B 113, 5032-5045 (2009)).}, language = {en} } @article{YadavalliKorolkovMoulinetal.2014, author = {Yadavalli, Nataraja Sekhar and Korolkov, Denis and Moulin, Jean-Francois and Krutyeva, Margarita and Santer, Svetlana}, title = {Probing opto-mechanical stresses within azobenzene-containing photosensitive polymer films by a thin metal film placed above}, series = {ACS applied materials \& interfaces}, volume = {6}, journal = {ACS applied materials \& interfaces}, number = {14}, publisher = {American Chemical Society}, address = {Washington}, issn = {1944-8244}, doi = {10.1021/am501870t}, pages = {11333 -- 11340}, year = {2014}, abstract = {Azo-modified photosensitive polymers offer the interesting possibility to reshape bulk polymers and thin films by UV-irradiation while being in the solid glassy state. The polymer undergoes considerable mass transport under irradiation with a light interference pattern resulting in the formation of surface relief grating (SRG). The forces inscribing this SRG pattern into a thin film are hard to assess experimentally directly. In the current study, we are proposing a method to probe opto-mechanical stresses within polymer films by characterizing the mechanical response of thin metal films (10 nm) deposited on the photosensitive polymer. During irradiation, the metal film not only deforms along with the SRG formation but ruptures in a regular and complex manner. The morphology of the cracks differs strongly depending on the electrical field distribution in the interference pattern, even when the magnitude and the kinetics of the strain are kept constant. This implies a complex local distribution of the opto-mechanical stress along the topography grating. In addition, the neutron reflectivity measurements of the metal/polymer interface indicate the penetration of a metal layer within the polymer, resulting in a formation of a bonding layer that confirms the transduction of light-induced stresses in the polymer layer to a metal film.}, language = {en} } @article{UmlandtFeldmannSchnecketal.2020, author = {Umlandt, Maren and Feldmann, David and Schneck, Emanuel and Santer, Svetlana and Bekir, Marek}, title = {Adsorption of photoresponsive surfactants at solid-liquid interfaces}, series = {Langmuir}, volume = {36}, journal = {Langmuir}, number = {46}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.0c02545}, pages = {14009 -- 14018}, year = {2020}, abstract = {We report on the adsorption kinetics of azoben-zene-containing surfactants on solid surfaces of different hydrophobicity. The understanding of this processes is of great importance for many interfacial phenomena that can be actuated and triggered by light, since the surfactant molecules contain a photoresponsive azobenzene group in their hydrophobic tail. Three surfactant types are studied, differing in the spacer connecting the headgroup and the azobenzene unit by between 6 and 10 CH2 groups. Under irradiation with light of a suitable wavelength, the azobenzene undergoes reversible photoisomerization between two states, a nonpolar trans-state and a highly polar cis-state. Consequently, the surfactant molecule changes its hydrophobicity and thus affinity to a surface depending on the photoisomerization state of the azobenzene. The adsorption behavior on hydrophilic (glass) and hydrophobic (TeflonAF) surfaces is analyzed using quartz crystal microbalance with dissipation (QCM-D) and zeta-potential measurements. At equilibrium, the adsorbed surfactant amount is almost twice as large on glass compared to TeflonAF for both isomers. The adsorption rate for the trans-isomers on both surfaces is similar, but the desorption rate of the trans-isomers is faster at the glass-water interface than at the Teflon-water interface. This result demonstrates that the trans-isomers have higher affinity for the glass surface, so the trans-to-cis ratios on glass and TeflonAF are 80/1 and 2/1, respectively, with similar trends for all three surfactant types.}, language = {en} } @article{TitovSharmaLomadzeetal.2021, author = {Titov, Evgenii and Sharma, Anjali and Lomadze, Nino and Saalfrank, Peter and Santer, Svetlana and Bekir, Marek}, title = {Photoisomerization of an azobenzene-containing surfactant within a micelle}, series = {ChemPhotoChem}, volume = {5}, journal = {ChemPhotoChem}, number = {10}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {2367-0932}, doi = {10.1002/cptc.202100103}, pages = {926 -- 932}, year = {2021}, abstract = {Photosensitive azobenzene-containing surfactants have attracted great attention in past years because they offer a means to control soft-matter transformations with light. At concentrations higher than the critical micelle concentration (CMC), the surfactant molecules aggregate and form micelles, which leads to a slowdown of the photoinduced trans -> cis azobenzene isomerization. Here, we combine nonadiabatic dynamics simulations for the surfactant molecules embedded in the micelles with absorption spectroscopy measurements of micellar solutions to uncover the reasons responsible for the reaction slowdown. Our simulations reveal a decrease of isomerization quantum yields for molecules inside the micelles. We also observe a reduction of extinction coefficients upon micellization. These findings explain the deceleration of the trans -> cis switching in micelles of the azobenzene-containing surfactants.}, language = {en} } @article{TitovLysyakovaLomadzeetal.2015, author = {Titov, Evgenii and Lysyakova, Liudmila and Lomadze, Nino and Kabashin, Andrei V. and Saalfrank, Peter and Santer, Svetlana}, title = {Thermal Cis-to-Trans Isomerization of Azobenzene-Containing Molecules Enhanced by Gold Nanoparticles: An Experimental and Theoretical Study}, series = {The journal of physical chemistry : C, Nanomaterials and interfaces}, volume = {119}, journal = {The journal of physical chemistry : C, Nanomaterials and interfaces}, number = {30}, publisher = {American Chemical Society}, address = {Washington}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.5b02473}, pages = {17369 -- 17377}, year = {2015}, abstract = {We report on the experimental and theoretical investigation of a considerable increase in the rate for thermal cis -> trans isomerization of azobenzene-containing molecules in the presence of gold nanopartides. Experimentally, by means of UV vis spectroscopy, we studied a series of azobenzene-containing surfactants and 4-nitroazobenzene. We found that in the presence of gold,nanoparticles the thermal lifetime of the cis isomer of the azobenzenecontaining molecules was decreased by up to 3 orders of magnitude in comparison to the lifetime in solution without nanoparticles. The electron transfer between azobenzene-containing molecules and a surface of gold nanopartides is a possible reason to promote the thermal cis trans switching. To investigate the effect of electron attachment to, and withdrawal from, the azobenzene-containing molecules on the isomerization rate, we performed density functional theory calculations of activation energy barriers of the reaction together with Eyring's transition state theory calculations of the rates for azobenzene derivatives with donor and acceptor groups in para position of one of the phenyl rings, as well as for one of the azobenzene-containing surfactants. We found that activation barriers are greatly lowered for azobenzene-containing molecules, both upon electron attachment and withdrawal, which leads, in turn, to a dramatic increase in the thermal isomerization rate.}, language = {en} } @article{SimonovaIvanovMeleshkoetal.2020, author = {Simonova, Maria and Ivanov, Ivan and Meleshko, Tamara and Kopyshev, Alexey and Santer, Svetlana and Yakimansky, Alexander and Filippov, Alexander}, title = {Self-assembly of molecular brushes with polyimide backbone and amphiphilic block copolymer side chains in selective solvents}, series = {Polymers}, volume = {12}, journal = {Polymers}, number = {12}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, doi = {10.3390/polym12122922}, pages = {15}, year = {2020}, abstract = {Three-component molecular brushes with a polyimide backbone and amphiphilic block copolymer side chains with different contents of the "inner" hydrophilic (poly(methacrylic acid)) and "outer" hydrophobic (poly(methyl methacrylate)) blocks were synthesized and characterized by molecular hydrodynamics and optics methods in solutions of chloroform, dimethylformamide, tetrahydrofuran and ethanol. The peculiarity of the studied polymers is the amphiphilic structure of the grafted chains. The molar masses of the molecular brushes were determined by static and dynamic light scattering in chloroform in which polymers form molecularly disperse solutions. Spontaneous self-assembly of macromolecules was detected in dimethylformamide, tetrahydrofuran and ethanol. The aggregates size depended on the thermodynamic quality of the solvent as well as on the macromolecular architectural parameters. In dimethylformamide and tetrahydrofuran, the distribution of hydrodynamic radii of aggregates was bimodal, while in ethanol, it was unimodal. Moreover, in ethanol, an increase in the poly(methyl methacrylate) content caused a decrease in the hydrodynamic radius of aggregates. A significant difference in the nature of the blocks included in the brushes determines the selectivity of the used solvents, since their thermodynamic quality with respect to the blocks is different. The macromolecules of the studied graft copolymers tend to self-organization in selective solvents with formation of a core-shell structure with an insoluble solvophobic core surrounded by the solvophilic shell of side chains.}, language = {en} } @article{SilantevaKomolkinMamontovaetal.2020, author = {Silanteva, Irina A. and Komolkin, Andrei and Mamontova, Veronika V. and Vorontsov-Velyaminov, Pavel N. and Santer, Svetlana and Kasyanenko, Nina A.}, title = {Some features of surfactant organization in DNA solutions at various NaCl concentrations}, series = {ACS omega / American Chemical Society}, volume = {5}, journal = {ACS omega / American Chemical Society}, number = {29}, publisher = {ACS Publications}, address = {Washington}, issn = {2470-1343}, doi = {10.1021/acsomega.0c01850}, pages = {18234 -- 18243}, year = {2020}, abstract = {The photosensitive azobenzene-containing surfactant C-4-Azo-OC(6)TMAB is a promising agent for reversible DNA packaging in a solution. The simulation of the trans-isomer surfactant organization into associates in a solution with and without salt as well as its binding to DNA at different NaCl concentrations was carried out by molecular dynamics. Experimental data obtained by spectral and hydrodynamic methods were used to verify the results of simulation. It was shown that head-to-tail aggregates with close to antiparallel orientation of surfactant molecules were formed at certain NaCl and surfactant concentrations (below critical micelle concentration). Such aggregates have two positively charged ends, and therefore, they can be attracted to negatively charged DNA phosphates far located along the chain, as well as those that belong to different molecules. This contributes to the formation of intermolecular DNA-DNA contacts, and this way, the experimentally observed precipitation of DNA can be explained.}, language = {en} } @article{SilantevaKomolkinMamontovaetal.2021, author = {Silanteva, Irina A. and Komolkin, Andrei and Mamontova, Veronika V. and Gabrusenok, Pavel and Vorontsov-Velyaminov, Pavel N. and Santer, Svetlana and Kasyanenko, Nina A.}, title = {Cis-isomers of photosensitive cationic azobenzene surfactants in DNA solutions at different NaCl concentrations}, series = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, volume = {125}, journal = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, number = {40}, publisher = {American Chemical Society}, address = {Washington}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.1c07864}, pages = {11197 -- 11207}, year = {2021}, abstract = {The DNA interaction with cis-isomers of photosensitive azobenzene-containing surfactants was studied by both experimental methods and computer simulation. It was shown that before the organization of micelles, such surfactants in the cis-conformation form associates of only a single type with a disordered orientation of molecules. In contrast, for trans-isomers, there exist two types of associates with head-to-head or head-to-tail orientations of molecules in dependence on salt concentration in a solution. The comparison of cis- and trans-isomer binding to DNA and the influence of salt concentration on the formation of their complexes with DNA were studied. It was shown that cis-isomers interact with phosphate groups of DNA and that their molecules were also located along the minor groove of DNA.}, language = {en} } @misc{SharmaBekirLomadzeetal.2020, author = {Sharma, Anjali and Bekir, Marek and Lomadze, Nino and Santer, Svetlana}, title = {Photo-Isomerization Kinetics of Azobenzene Containing Surfactant Conjugated with Polyelectrolyte}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1101}, issn = {1866-8372}, doi = {10.25932/publishup-48942}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489427}, pages = {14}, year = {2020}, abstract = {Ionic complexation of azobenzene-containing surfactants with any type of oppositely charged soft objects allows for making them photo-responsive in terms of their size, shape and surface energy. Investigation of the photo-isomerization kinetic and isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged objects is a necessary prerequisite for understanding the structural response of photo-sensitive complexes. Here, we report on photo-isomerization kinetics of a photo-sensitive surfactant in the presence of poly(acrylic acid, sodium salt). We show that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in aqueous solution. In a photo-stationary state, the ratio between the trans and cis isomers is shifted to a higher trans-isomer concentration for all irradiation wavelengths. This is explained by the formation of surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration and inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates.}, language = {en} }