@article{ZhangWielandReicheetal.2012, author = {Zhang, Zhuodong and Wieland, Ralf and Reiche, Matthias and Funk, Roger and Hoffmann, Carsten and Li, Yong and Sommer, Michael}, title = {Identifying sensitive areas to wind erosion in the xilingele grassland by computational fluid dynamics modelling}, series = {Ecological informatics : an international journal on ecoinformatics and computational ecolog}, volume = {8}, journal = {Ecological informatics : an international journal on ecoinformatics and computational ecolog}, number = {5}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1574-9541}, doi = {10.1016/j.ecoinf.2011.12.002}, pages = {37 -- 47}, year = {2012}, abstract = {In order to identify the areas in the Xilingele grassland which are sensitive to wind erosion, a computational fluid dynamics model (CFD-WEM) was used to simulate the wind fields over a region of 37 km(2) which contains different topography and land use types. Previous studies revealed the important influences of topography and land use on wind erosion in the Xilingele grassland. Topography influences wind fields at large scale, and land use influences wind fields near the ground. Two steps were designed to implement the CFD wind simulation, and they were respectively to simulate the influence of topography and surface roughness on the wind. Digital elevation model (DEM) and surface roughness length were the key inputs for the CFD simulation. The wind simulation by CFD-WEM was validated by a wind data set which was measured simultaneously at six positions in the field. Three scenarios with different wind velocities were designed based on observed dust storm events, and wind fields were simulated according to these scenarios to predict the sensitive areas to wind erosion. General assumptions that cropland is the most sensitive area to wind erosion and heavily and moderately grazed grasslands are both sensitive etc. can be refined by the modelling of CFD-WEM. Aided by the results of this study, the land use planning and protection measures against wind erosion can be more efficient. Based on the case study in the Xilingele grassland, a method of regional wind erosion assessment aided by CFD wind simulation is summarized. The essence of this method is a combination of CFD wind simulation and determination of threshold wind velocity for wind erosion. Because of the physically-based simulation and the flexibility of the method, it can be generalised to other regions.}, language = {en} } @article{ZhangWielandReicheetal.2011, author = {Zhang, Zhuodong and Wieland, Ralf and Reiche, Matthias and Funk, Roger and Hoffmann, Carsten and Li, Yong and Sommer, Michael}, title = {Wind modelling for wind erosion research by open source computational fluid dynamics}, series = {Ecological informatics : an international journal on ecoinformatics and computational ecolog}, volume = {6}, journal = {Ecological informatics : an international journal on ecoinformatics and computational ecolog}, number = {5}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1574-9541}, doi = {10.1016/j.ecoinf.2011.02.001}, pages = {316 -- 324}, year = {2011}, abstract = {The open source computational fluid dynamics (CFD) wind model (CFD-WEM) for wind erosion research in the Xilingele grassland in Inner Mongolia (autonomous region, China) is compared with two open source CFD models Gerris and OpenFOAM. The evaluation of these models was made according to software technology, implemented methods, handling, accuracy and calculation speed. All models were applied to the same wind tunnel data set. Results show that the simplest CFD-WEM has the highest calculation speed with acceptable accuracy, and the most powerful OpenFOAM produces the simulation with highest accuracy and the lowest calculation speed. Gerris is between CFD-WEM and OpenFOAM. It calculates faster than OpenFOAM, and it is capable to solve different CFD problems. CFD-WEM is the optimal model to be further developed for wind erosion research in Inner Mongolia grassland considering its efficiency and the uncertainties of other input data. However, for other applications using CFD technology, Gerris and OpenFOAM can be good choices. This paper shows the powerful capability of open source CFD software in wind erosion study, and advocates more involvement of open source technology in wind erosion and related ecological researches.}, language = {en} } @article{ZhangWielandReicheetal.2012, author = {Zhang, Zhuo-dong and Wieland, Ralf and Reiche, Matthias and Funk, Roger and Hoffmann, Carsten and Li, Yong and Sommer, Michael}, title = {A computational fluid dynamics model for wind simulation: model implementation and experimental validation}, series = {Journal of Zhejiang University : an international journal ; Science A, Applied physics \& engineering : an international applied physics \& engineering journal}, volume = {13}, journal = {Journal of Zhejiang University : an international journal ; Science A, Applied physics \& engineering : an international applied physics \& engineering journal}, number = {4}, publisher = {Zhejiang University Press}, address = {Hangzou}, issn = {1673-565X}, doi = {10.1631/jzus.A1100231}, pages = {274 -- 283}, year = {2012}, abstract = {To provide physically based wind modelling for wind erosion research at regional scale, a 3D computational fluid dynamics (CFD) wind model was developed. The model was programmed in C language based on the Navier-Stokes equations, and it is freely available as open source. Integrated with the spatial analysis and modelling tool (SAMT), the wind model has convenient input preparation and powerful output visualization. To validate the wind model, a series of experiments was conducted in a wind tunnel. A blocking inflow experiment was designed to test the performance of the model on simulation of basic fluid processes. A round obstacle experiment was designed to check if the model could simulate the influences of the obstacle on wind field. Results show that measured and simulated wind fields have high correlations, and the wind model can simulate both the basic processes of the wind and the influences of the obstacle on the wind field. These results show the high reliability of the wind model. A digital elevation model (DEM) of an area (3800 m long and 1700 m wide) in the Xilingele grassland in Inner Mongolia (autonomous region, China) was applied to the model, and a 3D wind field has been successfully generated. The clear implementation of the model and the adequate validation by wind tunnel experiments laid a solid foundation for the prediction and assessment of wind erosion at regional scale.}, language = {en} } @article{WilkenBaurSommeretal.2018, author = {Wilken, Florian and Baur, Martin and Sommer, Michael and Deumlich, Detlef and Bens, Oliver and Fiener, Peter}, title = {Uncertainties in rainfall kinetic energy-intensity relations for soil erosion modelling}, series = {Catena : an interdisciplinary journal of soil science, hydrology, geomorphology focusing on geoecology and landscape evolution}, volume = {171}, journal = {Catena : an interdisciplinary journal of soil science, hydrology, geomorphology focusing on geoecology and landscape evolution}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0341-8162}, doi = {10.1016/j.catena.2018.07.002}, pages = {234 -- 244}, year = {2018}, abstract = {For bare soil conditions, the most important process driving and initiating splash and interrill erosion is the detachment of soil particles via raindrop impact. The kinetic energy of a rainfall event is controlled by the drop size and fall velocity distribution, which is often directly or indirectly implemented in erosion models. Therefore, numerous theoretical functions have been developed for the estimation of rainfall kinetic energy from available rainfall intensity measurements. The aim of this study is to assess differences inherent in a wide number of kinetic energy-rainfall intensity (KE-I) relations and their role in soil erosion modelling. Therefore, 32 KE-I relations are compared against measured rainfall energies based on optical distrometer measurements carried out at five stations of two substantially different rainfall regimes. These allow for continuous high-resolution (1-min) direct measurements of rainfall kinetic energies from a detailed spectrum of measured drop sizes and corresponding fall velocities. To quantify the effect of different KE-I relations on sediment delivery, we apply the erosion model WATEM/SEDEM in an experimental setup to four catchments of NE-Germany. The distrometer data shows substantial differences between measured and theoretical models of drop size and fall velocity distributions. For low intensities the number of small drops is overestimated by the Marshall and Palmer (1948; MP) drop size distribution, while for high intensities the proportion of large drops is overestimated by the MP distribution. The distrometer measurements show a considerable proportion of large drops falling at slower velocities than predicted by the Gunn and Kinzer (1949) terminal velocity model. For almost all rainfall events at all stations, the KE-I relations predicted higher cumulative kinetic energy sums compared to the direct measurements of the optical distrometers. The different KE-I relations show individual characteristics over the course of rainfall intensity levels. Our results indicate a high sensitivity (up to a range from 10 to 27 t ha(-1)) of the simulated sediment delivery related to different KE-I relations. Hence, the uncertainty associated with KE-I relations for soil erosion modelling is of critical importance.}, language = {en} } @article{WielandDalchowSommeretal.2011, author = {Wieland, Ralf and Dalchow, Claus and Sommer, Michael and Fukuda, Kyoko}, title = {Multi-Scale Landscape Analysis (MSLA) a method to identify correlation of relief with ecological point data}, series = {Ecological informatics : an international journal on ecoinformatics and computational ecolog}, volume = {6}, journal = {Ecological informatics : an international journal on ecoinformatics and computational ecolog}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1574-9541}, doi = {10.1016/j.ecoinf.2010.09.002}, pages = {164 -- 169}, year = {2011}, abstract = {A common problem in ecology is identifying the relationship between relief and site properties obtainable only by point measurements. The method of Multi-Scale Landscape Analysis (MSLA) identifies such correlations. MSLA combines frequency filtering of the digital elevation model (DEM) with an estimation of the optimum filter coefficients using an optimization procedure. Tested using point data of soil decarbonation from a German young moraine landscape, MSLA provided significant results. Implemented within open source software SAMT. MSLA is comfortable and flexible to use, offering applications for numerous other spatial analysis problems.}, language = {en} } @article{WehrhanSommer2021, author = {Wehrhan, Marc and Sommer, Michael}, title = {A parsimonious approach to estimate soil organic carbon applying Unmanned Aerial System (UAS) multispectral imagery and the topographic position index in a heterogeneous soil landscape}, series = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, volume = {13}, journal = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, number = {18}, publisher = {MDPI}, address = {Basel}, issn = {2072-4292}, doi = {10.3390/rs13183557}, pages = {20}, year = {2021}, abstract = {Remote sensing plays an increasingly key role in the determination of soil organic carbon (SOC) stored in agriculturally managed topsoils at the regional and field scales. Contemporary Unmanned Aerial Systems (UAS) carrying low-cost and lightweight multispectral sensors provide high spatial resolution imagery (<10 cm). These capabilities allow integrate of UAS-derived soil data and maps into digitalized workflows for sustainable agriculture. However, the common situation of scarce soil data at field scale might be an obstacle for accurate digital soil mapping. In our case study we tested a fixed-wing UAS equipped with visible and near infrared (VIS-NIR) sensors to estimate topsoil SOC distribution at two fields under the constraint of limited sampling points, which were selected by pedological knowledge. They represent all releva nt soil types along an erosion-deposition gradient; hence, the full feature space in terms of topsoils' SOC status. We included the Topographic Position Index (TPI) as a co-variate for SOC prediction. Our study was performed in a soil landscape of hummocky ground moraines, which represent a significant of global arable land. Herein, small scale soil variability is mainly driven by tillage erosion which, in turn, is strongly dependent on topography. Relationships between SOC, TPI and spectral information were tested by Multiple Linear Regression (MLR) using: (i) single field data (local approach) and (ii) data from both fields (pooled approach). The highest prediction performance determined by a leave-one-out-cross-validation (LOOCV) was obtained for the models using the reflectance at 570 nm in conjunction with the TPI as explanatory variables for the local approach (coefficient of determination (R-2) = 0.91; root mean square error (RMSE) = 0.11\% and R-2 = 0.48; RMSE = 0.33, respectively). The local MLR models developed with both reflectance and TPI using values from all points showed high correlations and low prediction errors for SOC content (R-2 = 0.88, RMSE = 0.07\%; R-2 = 0.79, RMSE = 0.06\%, respectively). The comparison with an enlarged dataset consisting of all points from both fields (pooled approach) showed no improvement of the prediction accuracy but yielded decreased prediction errors. Lastly, the local MLR models were applied to the data of the respective other field to evaluate the cross-field prediction ability. The spatial SOC pattern generally remains unaffected on both fields; differences, however, occur concerning the predicted SOC level. Our results indicate a high potential of the combination of UAS-based remote sensing and environmental covariates, such as terrain attributes, for the prediction of topsoil SOC content at the field scale. The temporal flexibility of UAS offer the opportunity to optimize flight conditions including weather and soil surface status (plant cover or residuals, moisture and roughness) which, otherwise, might obscure the relationship between spectral data and SOC content. Pedologically targeted selection of soil samples for model development appears to be the key for an efficient and effective prediction even with a small dataset.}, language = {en} } @article{WehrhanRaunekerSommer2016, author = {Wehrhan, Marc and Rauneker, Philipp and Sommer, Michael}, title = {UAV-Based Estimation of Carbon Exports from Heterogeneous Soil Landscapes-A Case Study from the CarboZALF Experimental Area}, series = {SENSORS}, volume = {16}, journal = {SENSORS}, publisher = {MDPI}, address = {Basel}, issn = {1424-8220}, doi = {10.3390/s16020255}, pages = {24}, year = {2016}, abstract = {The advantages of remote sensing using Unmanned Aerial Vehicles (UAVs) are a high spatial resolution of images, temporal flexibility and narrow-band spectral data from different wavelengths domains. This enables the detection of spatio-temporal dynamics of environmental variables, like plant-related carbon dynamics in agricultural landscapes. In this paper, we quantify spatial patterns of fresh phytomass and related carbon (C) export using imagery captured by a 12-band multispectral camera mounted on the fixed wing UAV Carolo P360. The study was performed in 2014 at the experimental area CarboZALF-D in NE Germany. From radiometrically corrected and calibrated images of lucerne (Medicago sativa), the performance of four commonly used vegetation indices (VIs) was tested using band combinations of six near-infrared bands. The highest correlation between ground-based measurements of fresh phytomass of lucerne and VIs was obtained for the Enhanced Vegetation Index (EVI) using near-infrared band b(899). The resulting map was transformed into dry phytomass and finally upscaled to total C export by harvest. The observed spatial variability at field- and plot-scale could be attributed to small-scale soil heterogeneity in part.}, language = {en} } @article{WehrhanPuppeKaczoreketal.2021, author = {Wehrhan, Marc and Puppe, Daniel and Kaczorek, Danuta and Sommer, Michael}, title = {Spatial patterns of aboveground phytogenic Si stocks in a grass-dominated catchment}, series = {Biogeosciences : BG}, volume = {18}, journal = {Biogeosciences : BG}, number = {18}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1726-4170}, doi = {10.5194/bg-18-5163-2021}, pages = {5163 -- 5183}, year = {2021}, abstract = {Various studies have been performed to quantify silicon (Si) stocks in plant biomass and related Si fluxes in terrestrial biogeosystems. Most studies are deliberately designed on the plot scale to ensure low heterogeneity in soils and plant composition, hence similar environmental conditions. Due to the immanent spatial soil variability, the transferability of results to larger areas, such as catchments, is therefore limited. However, the emergence of new technical features and increasing knowledge on details in Si cycling lead to a more complex picture at landscape and catchment scales. Dynamic and static soil properties change along the soil continuum and might influence not only the species composition of natural vegetation but also its biomass distribution and related Si stocks. Maximum likelihood (ML) classification was applied to multispectral imagery captured by an unmanned aerial system (UAS) aiming at the identification of land cover classes (LCCs). Subsequently, the normalized difference vegetation index (NDVI) and ground-based measurements of biomass were used to quantify aboveground Si stocks in two Si-accumulating plants (Calamagrostis epige-jos and Phragmites australis) in a heterogeneous catchment and related corresponding spatial patterns of these stocks to soil properties. We found aboveground Si stocks of C. epige-jos and P. australis to be surprisingly high (maxima of Si stocks reach values up to 98 g Sim(-2)), i.e. comparable to or markedly exceeding reported values for the Si storage in aboveground vegetation of various terrestrial ecosystems. We further found spatial patterns of plant aboveground Si stocks to reflect spatial heterogeneities in soil properties. From our results, we concluded that (i) aboveground biomass of plants seems to be the main factor of corresponding phytogenic Si stock quantities, and (ii) a detection of biomass heterogeneities via UAS-based remote sensing represents a promising tool for the quantification of lifelike phytogenic Si pools at landscape scales.}, language = {en} } @article{WebberLischeidSommeretal.2020, author = {Webber, Heidi and Lischeid, Gunnar and Sommer, Michael and Finger, Robert and Nendel, Claas and Gaiser, Thomas and Ewert, Frank}, title = {No perfect storm for crop yield failure in Germany}, series = {Environmental research letters}, volume = {15}, journal = {Environmental research letters}, number = {10}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1748-9326}, doi = {10.1088/1748-9326/aba2a4}, pages = {14}, year = {2020}, abstract = {Large-scale crop yield failures are increasingly associated with food price spikes and food insecurity and are a large source of income risk for farmers. While the evidence linking extreme weather to yield failures is clear, consensus on the broader set of weather drivers and conditions responsible for recent yield failures is lacking. We investigate this for the case of four major crops in Germany over the past 20 years using a combination of machine learning and process-based modelling. Our results confirm that years associated with widespread yield failures across crops were generally associated with severe drought, such as in 2018 and to a lesser extent 2003. However, for years with more localized yield failures and large differences in spatial patterns of yield failures between crops, no single driver or combination of drivers was identified. Relatively large residuals of unexplained variation likely indicate the importance of non-weather related factors, such as management (pest, weed and nutrient management and possible interactions with weather) explaining yield failures. Models to inform adaptation planning at farm, market or policy levels are here suggested to require consideration of cumulative resource capture and use, as well as effects of extreme events, the latter largely missing in process-based models. However, increasingly novel combinations of weather events under climate change may limit the extent to which data driven methods can replace process-based models in risk assessments.}, language = {en} } @article{WannerSeidlLampaHoehnetal.2016, author = {Wanner, Manfred and Seidl-Lampa, Barbara and H{\"o}hn, Axel and Puppe, Daniel and Meisterfeld, Ralf and Sommer, Michael}, title = {Culture growth of testate amoebae under different silicon concentrations}, series = {European journal of protistology}, volume = {56}, journal = {European journal of protistology}, publisher = {Royal Society of Chemistry}, address = {Jena}, organization = {Veritas Collaboration}, issn = {0932-4739}, doi = {10.1016/j.ejop.2016.08.008}, pages = {171 -- 179}, year = {2016}, abstract = {Testate amoebae with self-secreted siliceous shell platelets ("idiosomes") play an important role in terrestrial silicon (Si) cycles. In this context, Si-dependent culture growth dynamics of idiosomic testate amoebae are of interest. Clonal cultures of idiosomic testate amoebae were analyzed under three different Si concentrations: low (50 mu mol L-1), moderate/site-specific (150 mu mol L-1) and high Si supply (500 mu mol L-1). Food (Saccharomyces cerevisiae) was provided in surplus. (i) Shell size of four different clones of idiosomic testate amoebae either decreased (Trinema galeata, Euglypha filifera cf.), increased (E. rotunda cf.), or did not change (E. rotunda) under the lowest Si concentration (50 mu mol Si L-1). (ii) Culture growth of idiosomic Euglypha rotunda was dependent on Si concentration. The more Si available in the culture medium, the earlier the entry into exponential growth phase. (iii) Culture growth of idiosomic Euglypha rotunda was dependent on origin of inoculum. Amoebae previously cultured under a moderate Si concentration revealed highest sustainability in consecutive cultures. Amoebae derived from cultures with high Si concentrations showed rapid culture growth which finished early in consecutive cultures. (iv) Si (diluted in the culture medium) was absorbed by amoebae and fixed in the amoeba shells resulting in decreased Si concentrations. (C) 2016 Elsevier GmbH. All rights reserved.}, language = {en} } @article{WannerElmerSommeretal.2015, author = {Wanner, Manfred and Elmer, Michael and Sommer, Michael and Funk, Roger and Puppe, Daniel}, title = {Testate amoebae colonizing a newly exposed land surface are of airborne origin}, series = {Ecological indicators : integrating monitoring, assessment and management}, volume = {48}, journal = {Ecological indicators : integrating monitoring, assessment and management}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1470-160X}, doi = {10.1016/j.ecolind.2014.07.037}, pages = {55 -- 62}, year = {2015}, abstract = {We hypothesized that at the very beginning of terrestrial ecosystem development, airborne testate amoebae play a pivotal role in facilitating organismic colonization and related soil processes. We, therefore, analyzed size and quantity of airborne testate amoebae and immigration and colonization success of airborne testate amoebae on a new land surface (experimental site "Chicken Creek", artificial post-mining water catchment). Within an altogether 91-day exposure of 70 adhesive traps, 12 species of testate amoebae were identified to be of airborne origin. Phryganella acropodia (51\% of all individuals found, diameter about 35-45 mu m) and Centropyxis sphagnicola (23\% of all individuals found, longest axis about 55-68 mu m), occurred most frequently in the adhesive traps. We extrapolated an aerial amoeba deposition of 61 individuals d(-1) m(-2) (living and dead individuals combined). Although it would be necessary to have a longer sequence (some additional years), our analysis of the "target substrate" of aerial immigration (catchment site) may point to a shift from a stochastic (variable) beginning of community assembly to a more deterministic (stable) course. This shift was assigned to an age of seven years of initial soil development. Although experienced specialists are necessary to conduct these time-consuming studies, the presented data suggest that terrestrial amoebae are suitable indicators for initial ecosystem development and utilization.}, language = {en} } @article{vanderMeijTemmeWallingaetal.2017, author = {van der Meij, Marijn W. and Temme, Arnaud J. A. M. and Wallinga, J. and Hierold, W. and Sommer, Michael}, title = {Topography reconstruction of eroding landscapes - A case study from a hummocky ground moraine (CarboZALF-D)}, series = {Geomorphology : an international journal on pure and applied geomorphology}, volume = {295}, journal = {Geomorphology : an international journal on pure and applied geomorphology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0169-555X}, doi = {10.1016/j.geomorph.2017.08.015}, pages = {758 -- 772}, year = {2017}, abstract = {Erosion processes, aggravated by human activity, have a large impact on the spatial variation of soil and topographic properties. Knowledge of the topography prior to human-induced erosion (paleotopography) in naturally stable landscapes is valuable for identifying vulnerable landscape positions and is required as starting point for erosion modelling exercises. However, developing accurate reconstructions of paleotopography provide a major challenge for geomorphologists. Here, we present a set of paleotopographies for a closed kettle hole catchment in north-east Germany (4 ha), obtained through different reconstruction approaches. Current soil and colluvium thickness, estimated from a dataset of 264 soil descriptions using Ordinary Kriging, were used as input for a mass balance, or were compared with a set of undisturbed soil thicknesses to estimate the amount of erosion. The performance of the different approaches was assessed with cross-validation and the count of mispredicted eroded, depositional or stable landscape positions. The paleotopographic reconstruction approach based on the average thickness of undisturbed soils in the study area showed the best performance. This thickness (1.00 m) is comparable to the average undisturbed soil thickness in the region and in line with global correlations of soil thickness as a function of rainfall and initial CaCO3 content. The performance of the different approaches depended more on mispredictions of landscape position due to the assumption of a spatially constant initial soil depth than on small variations in this depth. To conclude, we mention several methodological and practical points of attention for future topography reconstruction studies, concerning data quality and availability, spatial configuration of data and other processes affecting topography. (C) 2017 Elsevier B.V. All rights reserved.}, language = {en} } @article{vanderMeijTemmeLinetal.2018, author = {van der Meij, Marijn W. and Temme, Arnaud J. A. M. and Lin, H. S. and Gerke, Horst H. and Sommer, Michael}, title = {On the role of hydrologic processes in soil and landscape evolution modeling}, series = {Earth science reviews : the international geological journal bridging the gap between research articles and textbooks}, volume = {185}, journal = {Earth science reviews : the international geological journal bridging the gap between research articles and textbooks}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-8252}, doi = {10.1016/j.earscirev.2018.09.001}, pages = {1088 -- 1106}, year = {2018}, abstract = {The ability of water to transport and transform soil materials is one of the main drivers of soil and landscape development. In turn, soil and landscape properties determine how water is distributed in soil landscapes. Understanding the complex dynamics of this co-evolution of soils, landscapes and the hydrological system is fundamental in adapting land management to changes in climate. Soil-Landscape Evolution Models (SLEMs) are used to simulate the development and evolution of soils and landscapes. However, many hydrologic processes, such as preferential flow and subsurface lateral flow, are currently absent in these models. This limits the applicability of SLEMs to improve our understanding of feedbacks in the hydro-pedo-geomorphological system. Implementation of these hydrologic processes in SLEMs faces several complications related to calculation demands, limited methods for linking pedogenic and hydrologic processes, and limited data on quantification of changes in the hydrological system over time. In this contribution, we first briefly review processes and feedbacks in soil-landscape-hydrological systems. Next, we elaborate on the development required to include these processes in SLEMs. We discuss the state-of-the-art knowledge, identify complications, give partial solutions and suggest important future development. The main requirements for incorporating hydrologic processes in SLEMs are: (1) designing a model framework that can deal with varying timescales for different sets of processes, (2) developing and implementing methods for simulating pedogenesis as a function of water flow, (3) improving and implementing knowledge on the evolution and dynamics of soil hydraulic properties over different timescales, and (4) improving the database on temporal changes and dynamics of flow paths.}, language = {en} } @article{vanderMeijReimannVornehmetal.2019, author = {van der Meij, Marijn W. and Reimann, Tony and Vornehm, V. K. and Temme, Arnaud J. A. M. and Wallinga, Jakob and van Beek, Roy and Sommer, Michael}, title = {Reconstructing rates and patterns of colluvial soil redistribution in agrarian (hummocky) landscapes}, series = {Earth surface processes and landforms : the journal of the British Geomorphological Research Group}, volume = {44}, journal = {Earth surface processes and landforms : the journal of the British Geomorphological Research Group}, number = {12}, publisher = {Wiley}, address = {Hoboken}, issn = {0197-9337}, doi = {10.1002/esp.4671}, pages = {2408 -- 2422}, year = {2019}, abstract = {Humans have triggered or accelerated erosion processes since prehistoric times through agricultural practices. Optically stimulated luminescence (OSL) is widely used to quantify phases and rates of the corresponding landscape change, by measuring the last moment of daylight exposure of sediments. However, natural and anthropogenic mixing processes, such as bioturbation and tillage, complicate the use of OSL as grains of different depositional ages become mixed, and grains become exposed to light even long after the depositional event of interest. Instead, OSL determines the stabilization age, indicating when sediments were buried below the active mixing zone. These stabilization ages can cause systematic underestimation when calculating deposition rates. Our focus is on colluvial deposition in a kettle hole in the Uckermark region, northeastern Germany. We took 32 samples from five locations in the colluvium filling the kettle hole to study both spatial and temporal patterns in colluviation. We combined OSL dating with advanced age modelling to determine the stabilization age of colluvial sediments. These ages were combined with an archaeological reconstruction of historical ploughing depths to derive the levels of the soil surface at the moment of stabilization; the deposition depths, which were then used to calculate unbiased deposition rates. We identified two phases of colluvial deposition. The oldest deposits (similar to 5 ka) were located at the fringe of the kettle hole and accumulated relatively slowly, whereas the youngest deposits (<0.3 ka) rapidly filled the central kettle hole with rates of two orders of magnitude higher. We suggest that the latter phase is related to artificial drainage, facilitating accessibility in the central depression for agricultural practices. Our results show the need for numerical dating techniques that take archaeological and soil-geomorphological information into account to identify spatiotemporal patterns of landscape change, and to correctly interpret landscape dynamics in anthropogenically influenced hilly landscapes. (c) 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley \& Sons Ltd.}, language = {en} } @article{VaidyaSchmidtRakowskietal.2021, author = {Vaidya, Shrijana and Schmidt, Marten and Rakowski, Peter and Bonk, Norbert and Verch, Gernot and Augustin, J{\"u}rgen and Sommer, Michael and Hoffmann, Mathias}, title = {A novel robotic chamber system allowing to accurately and precisely determining spatio-temporal CO2 flux dynamics of heterogeneous croplands}, series = {Agricultural and forest meteorology}, volume = {296}, journal = {Agricultural and forest meteorology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0168-1923}, doi = {10.1016/j.agrformet.2020.108206}, pages = {9}, year = {2021}, abstract = {The precise and accurate assessment of carbon dioxide (CO2) exchange is crucial to identify terrestrial carbon (C) sources and sinks and for evaluating their role within the global C budget. The substantial uncertainty in disentangling the management and soil impact on measured CO2 fluxes are largely ignored especially in cropland. The reasons for this lies in the limitation of the widely used eddy covariance as well as manual and automatic chamber systems, which either account for short-term temporal variability or small-scale spatial heterogeneity, but barely both. To address this issue, we developed a novel robotic chamber system allowing for dozens of spatial measurement repetitions, thus enabling CO2 exchange measurements in a sufficient temporal and high small-scale spatial resolution. The system was tested from 08th July to 09th September 2019 at a heterogeneous field (100 m x 16 m), located within the hummocky ground moraine landscape of northeastern Germany (CarboZALF-D). The field is foreseen for a longer-term block trial manipulation experiment extending over three erosion induced soil types and was covered with spring barley. Measured fluxes of nighttime ecosystem respiration (R-eco) and daytime net ecosystem exchange (NEE) showed distinct temporal patterns influenced by crop phenology, weather conditions and management practices. Similarly, we found clear small-scale spatial differences in cumulated (gap-filled) R-eco, gross primary productivity (GPP) and NEE fluxes affected by the three distinct soil types. Additionally, spatial patterns induced by former management practices and characterized by differences in soil pH and nutrition status (P and K) were also revealed between plots within each of the three soil types, which allowed compensating for prior to the foreseen block trial manipulation experiment. The results underline the great potential of the novel robotic chamber system, which not only detects short-term temporal CO2 flux dynamics but also reflects the impact of small-scale spatial heterogeneity.}, language = {en} } @article{SteinhoefelBreuervonBlanckenburgetal.2017, author = {Steinh{\"o}fel, Grit and Breuer, J{\"o}rn and von Blanckenburg, Friedhelm and Horn, Ingo and Sommer, Michael}, title = {The dynamics of Si cycling during weathering in two small catchments in the Black Forest (Germany) traced by Si isotopes}, series = {Chemical geology : official journal of the European Association for Geochemistry}, volume = {466}, journal = {Chemical geology : official journal of the European Association for Geochemistry}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0009-2541}, doi = {10.1016/j.chemgeo.2017.06.026}, pages = {389 -- 402}, year = {2017}, abstract = {Silicon stable isotopes have emerged as a powerful proxy to investigate weathering because Si uptake from solution by secondary minerals or by the vegetation causes significant shifts in the isotope composition. In this study, we determined the Si isotope compositions of the principle Si pools within two small catchments located on sandstone and paragneiss, respectively, in the temperate Black Forest (Germany). At both settings, clay formation is dominated by mineral transformation preserving largely the signature of parental minerals with delta Si-30 values of around -0.7\%. Bulk soils rich in primary minerals are similar to bulk parental material with delta Si-30 values close to -0.4\%. Topsoils are partly different because organic matter degradation has promoted intense weathering leading to delta Si-30 values as low as -1.0\%. Water samples expose highly dynamic weathering processes in the soil zone: 1) after spring snowmelt, increased release of DOC and high water fluxes trigger clay mineral dissolution which leads to delta Si-30 values down to -0.7\% and 2) in course of the summer, Si uptake by the vegetation and secondary mineral formation drives dissolved Si to typical positive delta Si-30 values up to 1.1\%. Groundwater with delta Si-30 values of around 0.4\% records steady processes in bedrock reflecting plagioclase weathering together with kaolinite precipitation. An isotope mass balance approach reveals incongruent weathering conditions where denudation of Si is largely driven by physical erosion. Erosion of phytoliths contributes 3 to 21\% to the total Si export flux, which is in the same order as the dissolved Si flux. These results elucidate the Si dynamics during weathering on catchments underlain of sedimentary origin, prevailing on the Earth surface and provide therefore valuable information to interpret the isotope signature of large river systems.}, language = {en} } @article{SteinhoefelBreuervonBlanckenburgetal.2011, author = {Steinhoefel, Grit and Breuer, J{\"o}rn and von Blanckenburg, Friedhelm and Horn, Ingo and Kaczorek, Danuta and Sommer, Michael}, title = {Micrometer silicon isotope diagnostics of soils by UV femtosecond laser ablation}, series = {Chemical geology : official journal of the European Association for Geochemistry}, volume = {286}, journal = {Chemical geology : official journal of the European Association for Geochemistry}, number = {3-4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0009-2541}, doi = {10.1016/j.chemgeo.2011.05.013}, pages = {280 -- 289}, year = {2011}, abstract = {This study presents the first Si isotope data of the principle Si pools in soils determined by a UV femtosecond laser ablation system coupled to a multicollector inductively coupled plasma mass spectrometer (MC-ICP-MS). This method reveals accurate and precise Si isotope data on bulk materials, and at high spatial resolution, on the mineral scale. The following Si pools have been investigated: a) the Si source to soils on all major silicate minerals on thin sections from bedrock fragments in the soil profiles; b) bulk soils (particle size <2 mm) after fusion to glass beads with an iridium-strip heater or pressed into powder pellets: c) separated clay fractions as pressed powder pellets and e) separated phytoliths as pressed powder pellets. Multiple analyses of three rock standards, BHVO-2, AGV-1 and RGM-1 as fused glass beads and as pressed powder pellets, reveal delta(30)Si values within the expected range of igneous rocks. The MPI-DING reference glass KL2-G exhibits the same Si isotope composition after remelting by an iridium-strip heater showing that this technique does not alter the isotope composition of the glass. We used this approach to investigated two immature Cambisols developed on sandstone and paragneiss in the Black Forest (Germany), respectively. Bulk soils show a largely uniform Si isotope signature for different horizons and locations, which is close to those of primary quartz and feldspar with delta(30)Si values around -0.4 parts per thousand. Soil clay formation is associated with limited Si mobility, which preserves initial Si isotope signatures of parental minerals. An exception is the organic horizon of the paragneiss catchment where intense weathering leads to a high mobility of Si and significant negative isotope signatures as low as to -1.00 parts per thousand in bulk soils. Biogenic opal in the form of phytoliths, exhibits negative Si isotope signatures of about -0.4 parts per thousand. These results demonstrate that UV femtosecond laser ablation MC-ICP-MS provides a tool to characterize the Si isotope signature of the principle Si pools left behind after weathering and Si transport have altered soils. These results can now serve as a fingerprint of the residual solids that can be used to explain the isotope composition of dissolved Si in soil solutions and river water, which is mostly enriched in the heavy isotopes.}, language = {en} } @article{SommerKaczorekKuzyakovetal.2006, author = {Sommer, Michael and Kaczorek, Danuta and Kuzyakov, Yakov and Breuer, J{\"o}rn}, title = {Silicon pools and fluxes in soils and landscapes : a review}, year = {2006}, abstract = {Silicon (Si) is the second-most abundant element in the earth's crust. In the pedosphere, however, huge spans of Si contents occur mainly caused by Si redistribution in soil profiles and landscapes. Here, we summarize the current knowledge on the different pools and fluxes of Si in soils and terrestrial biogeosystems. Weathering and subsequent release of soluble Si may lead to (1) secondarily bound Si in newly formed Al silicates, (2) amorphous silica precipitation on surfaces of other minerals, (3) plant uptake, formation of phytogenic Si, and subsequent retranslocation to soils, (4) translocation within soil profiles and formation of new horizons, or (5) translocation out of soils (desilication). The research carried out hitherto focused on the participation of Si in weathering processes, especially in clay neoformation, buffering mechanisms for acids in soils or chemical denudation of landscapes. There are, however, only few investigations on the characteristics and controls of the low-crystalline, almost pure silica compounds formed during pedogenesis. Further, there is strong demand to improve the knowledge of (micro)biological and rhizosphere processes contributing to Si mobilization, plant uptake, and formation of phytogenic Si in plants, and release due to microbial decomposition. The contribution of the biogenic Si sources to Si redistribution within soil profiles and desilication remains unknown concerning the pools, rates, processes, and driving forces. Comprehensive studies considering soil hydrological, chemical, and biological processes as well as their interactions at the scale of pedons and landscapes are necessary to make up and model the Si balance and to couple terrestrial processes with Si cycle of limnic, fluvial, or marine biogeosystems}, language = {en} } @article{SommerJochheimHoehnetal.2013, author = {Sommer, Michael and Jochheim, H. and H{\"o}hn, Axel and Breuer, J{\"o}rn and Zagorski, Z. and Busse, J. and Barkusky, Dietmar and Meier, K. and Puppe, D. and Wanner, Manfred and Kaczorek, Danuta}, title = {Si cycling in a forest biogeosystem - the importance of transient state biogenic Si pools}, series = {Biogeosciences}, volume = {10}, journal = {Biogeosciences}, number = {7}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1726-4170}, doi = {10.5194/bg-10-4991-2013}, pages = {4991 -- 5007}, year = {2013}, abstract = {The relevance of biological Si cycling for dissolved silica (DSi) export from terrestrial biogeosystems is still in debate. Even in systems showing a high content of weatherable minerals, like Cambisols on volcanic tuff, biogenic Si (BSi) might contribute > 50\% to DSi (Gerard et al., 2008). However, the number of biogeosystem studies is rather limited for generalized conclusions. To cover one end of controlling factors on DSi, i.e., weatherable minerals content, we studied a forested site with absolute quartz dominance (> 95 \%). Here we hypothesise minimal effects of chemical weathering of silicates on DSi. During a four year observation period (05/2007-04/2011), we quantified (i) internal and external Si fluxes of a temperate-humid biogeosystem (beech, 120 yr) by BIOME-BGC (version ZALF), (ii) related Si budgets, and (iii) Si pools in soil and beech, chemically as well as by SEM-EDX. For the first time two compartments of biogenic Si in soils were analysed, i.e., phytogenic and zoogenic Si pool (testate amoebae). We quantified an average Si plant uptake of 35 kg Si ha(-1) yr(-1) - most of which is recycled to the soil by litterfall - and calculated an annual biosilicification from idiosomic testate amoebae of 17 kg Si ha(-1). The comparatively high DSi concentrations (6 mg L-1) and DSi exports (12 kg Si ha(-1) yr(-1)) could not be explained by chemical weathering of feldspars or quartz dissolution. Instead, dissolution of a relictic, phytogenic Si pool seems to be the main process for the DSi observed. We identified canopy closure accompanied by a disappearance of grasses as well as the selective extraction of pine trees 30 yr ago as the most probable control for the phenomena observed. From our results we concluded the biogeosystem to be in a transient state in terms of Si cycling.}, language = {en} } @article{SiegmundPanebiancoAvecillaetal.2022, author = {Siegmund, Nicole and Panebianco, Juan E. and Avecilla, Fernando and Iturri, Laura Antonela and Sommer, Michael and Buschiazzo, Daniel and Funk, Roger}, title = {From gustiness to dustiness}, series = {Atmosphere}, volume = {13}, journal = {Atmosphere}, number = {8}, publisher = {MDPI}, address = {Basel}, issn = {2073-4433}, doi = {10.3390/atmos13081173}, pages = {14}, year = {2022}, abstract = {This study delivers the first empirical data-driven analysis of the impact of turbulence induced gustiness on the fine dust emissions from a measuring field. For quantification of the gust impact, a new measure, the Gust uptake Efficiency (GuE) is introduced. GuE provides a percentage of over- or under-proportional dust uptake due to gust activity during a wind event. For the three analyzed wind events, GuE values of up to 150\% could be found, yet they significantly differed per particle size class with a tendency for lower values for smaller particles. In addition, a high-resolution correlation analysis among 31 particle size classes and wind speed was conducted; it revealed strong negative correlation coefficients for very small particles and positive correlations for bigger particles, where 5 mu m appears to be an empirical threshold dividing both directions. We conclude with a number of suggestions for further investigations: an optimized field experiment setup, a new particle size ratio (PM1/PM0.5 in addition to PM10/PM2.5), as well as a comprehensive data-driven search for an optimal wind gust definition in terms of soil erosivity.}, language = {en} }