@article{Kleinpeter2006, author = {Kleinpeter, Erich}, title = {Push-pull alkenes : structure and pi-electron distribution}, doi = {10.2298/Jsc0601001k}, year = {2006}, abstract = {Push-pull alkenes are substituted alkenes with one or two electron-donating substituents on one end of C=C double bond and with one or two electron-accepting substituents at the other end. Allowance for pi-electron delocalization leads to the central C=C double bond becoming ever more polarized and with rising push-pull character, the pi-bond order of this double bond is reduced and, conversely, the corresponding pi-bond orders of the C-Don and C- Ace bonds are accordingly increased. This push-pull effect is of decisive influence on both the dynamic behavior and the chemical reactivity of this class of compounds and thus it is Of Considerable interest to both determine and to quantify the inherent push-pull effect. previously, the barriers to rotation about the C=C, C-Don and/or C-Acc partial double bonds (Delta G(not equal), as determined by dynamic NMR spectroscopy) or the C-13 chemical shift difference of the polarized C=C partial double bond (Delta delta(C=C)) were employed for this purpose, However, these parameters can have serious limitations, viz. the barriers can be immeasurable on the NMR timescale (either by being too high or too low-, heavily-biased conformers are present, etc.) or Delta delta(C=C) behaves in a non-additive manner with respect to the combination of the four substituents. Hence, a general parameter to quantify the push-pull effect is not yet available. Ab initio MO calculations on a collection of compounds, together with NBO analysis, provided valuable information on the structure, bond energies, electron occupancies and bonding/antibonding interactions. In addition to Delta G(C=C)(not equal) (either experimentally determined or theoretically calculated) and Delta delta(C=C), the bond length of the C=C partial double bond was also examined and it proved to be a reliable parameter to quantify the push-pull effect. Equally so, the quotient of the occupation numbers of the antibonding and bonding pi orbitals of the central C=C partial double bond ( pi*(C=C)/pi(C=C) ) could also be employed for this purpose}, language = {en} } @article{GorfmanTsirelsonPucheretal.2006, author = {Gorfman, Semen and Tsirelson, Vladimir and Pucher, Andreas and Morgenroth, Wolfgang and Pietsch, Ullrich}, title = {X-ray diffraction by a crystal in a permanent external electric field : electric-field-induced structural response in alpha-GaPO4}, issn = {0108-7673}, doi = {10.1107/S0108767305036111}, year = {2006}, abstract = {For the first time, site-selective distortion has been investigated for two different structural units in the ternary compound alpha-GaPO4 under the influence of a permanent external electric field. Based on 54 measured reflection intensities, the electric-field-induced distortion of PO4 and GaO4 tetrahedra in alpha-GaPO4 crystals is evaluated using a model of pseudoatomic displacements introduced recently [Gorfman, Tsirelson \& Pietsch (2005). Acta Cryst. A61, 387- 396]. A stronger variation of the P-O bond lengths in the PO4 tetrahedron was found compared to the bonds in the GaO4 tetrahedron. The different distortions of the tetrahedra owing to the electric field were analysed in terms of the valence charge density of alpha-GaPO4 and its topological characteristics. The larger charge of the P pseudoatom compared to the Ga atom was recognized as the main reason for the higher sensitivity of the PO4 tetrahedron to a permanent external electric field}, language = {en} } @article{SiegmannJelicic2010, author = {Siegmann, Rebekka and Jelicic, Aleksandra}, title = {Propagation and termination kinetics of PEGylated methacrylate radical polymerizations}, issn = {1022-1352}, doi = {10.1002/macp.200900527}, year = {2010}, abstract = {Propagation and chain-length averaged termination rate coefficients, k(p) and , for radical polymerizations of methacrylates carrying poly(ethylene glycol) (PEG) units are reported. kp derived from pulsed laser initiated polymerizations in bulk, in organic solvents, and in ionic liquids follows the methacrylate-type family behavior. Contrary, diffusion controlled k(t) values obtained from chemically initiated polymerizations with in-line FT- NIR monitoring of monomer conversion are strongly affected by the PEG units in the ester group. Compared to alkyl methacrylates is unexpectedly high. Moreover, of poly(ethylene glycol) ethyl ether methacrylate shows a significant reduction in k(t) already at 15\% conversion, whereas dodecyl methacrylate is constant up to at least 70\% conversion.}, language = {en} } @article{TiseanuGessnerKumkeetal.2008, author = {Tiseanu, Carmen and Geßner, Andre and Kumke, Michael Uwe and Parvulescu, V.}, title = {Dehydration and rehydration effects on the photoluminescence properties of terbium-exchanged MFI type materials}, doi = {10.1016/j.jnoncrysol.2007.11.017}, year = {2008}, language = {en} } @article{LaschewskyPoundSkrabaniaetal.2007, author = {Laschewsky, Andr{\´e} and Pound, Gwenaelle and Skrabania, Katja and Holdt, Hans-Joachim and Teller, Joachim}, title = {Unsymmetrical bifunctional trithiocarbonate as unexpected by-product in the synthesis of a dithioester RAFT agent}, issn = {0303-402X}, doi = {10.1007/s.00396-007-1653-5}, year = {2007}, abstract = {The trithiocarbonate 2-(benzylsulfanylthiocarbonylsulfanyl) propanoic acid is formed as minor by-product in the synthesis of the dithioester 2-((2-phenylthioacetyl)sulfanyl) propanoic acid via the Grignard route. The mechanism for this side reaction is not clear. The isolated trithiocarbonate may act as unsymmetrical but bifunctional RAFT agent in the aqueous polymerization of N,N-dimethyl acrylamide. Therefore, it is important to separate it completely from the dithioester before engaging the latter in controlled free radical polymerization to guarantee a maximum control.}, language = {en} } @article{Kleinpeter2008, author = {Kleinpeter, Erich}, title = {Quantification of the (Anti)Aromaticity of Fulvalenes Subjected to -Electron Cross-Delocalization}, doi = {10.1021/Jo701520j}, year = {2008}, abstract = {Fulvalenes 3-12 were theoretically studied at the ab initio level of theory. For the global minima structures, the occupation of the bonding (pi)C=C orbital of the interring C=C double bond obtained by NBO analysis quantitatively proves pi-electron cross-delocalization resulting in, at least partially, 2- or 6pi-electron aromaticity and 8pi- electron antiaromaticity for appropriate moieties. The cross-conjugation was quantified by the corresponding occupation numbers and lengths of the interring C=C double bonds, while the aromaticity or antiaromaticity due to cross- delocalization of the pi-electrons was visualized and quantified by through-space NMR shielding surfaces.}, language = {en} } @article{ShainyanMoskalikStarkeetal.2010, author = {Shainyan, Bagrat A. and Moskalik, Mikail Yu and Starke, Ines and Schilde, Uwe}, title = {Formation of unexpected products in the attempted aziridination of styrene with trifluoromethanesulfonyl nitrene}, issn = {0040-4020}, doi = {10.1016/j.tet.2010.08.070}, year = {2010}, abstract = {The reaction of styrene with trifluoromethanesulfonyl nitrene generated from trifluoromethanesulfonamide in the system (t-BuOCl+NaI) results in the formation of trifluoro-N-[2-phenyl-2-(trifluoromethylsulfonyl) aminoethyl]methanesulfonamide, 1-pheny1-2-iodo-ethanol, and 2,5-diphenyl-1,4-bis(trifluoromethyl sulfonyl)piperazine rather than the expected product of aziridination, 2-phenyl-1-(trifluoromethylsulfonyl) aziridine. The mechanism of the reaction is discussed.}, language = {en} } @article{ShainyanUshakovMeshcheryakovetal.2007, author = {Shainyan, Bagrat A. and Ushakov, Igor A. and Meshcheryakov, Vladimir I. and Schilde, Uwe and Koch, Andreas and Kleinpeter, Erich}, title = {The stereodynamics of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane and 1,3,5- tris(trifluoromethylsulfonyl)-1,3,5-triazinane- an experimental and theoretical study}, doi = {10.1016/j.tet.2007.09.041}, year = {2007}, abstract = {Multinuclear dynamic NMR spectroscopy of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane (3) revealed the existence of two conformers with differently oriented CF3 groups with respect to the ring, and two dynamic processes: ring inversion and restricted rotation about the N-S bond. Two transition states connecting the two conformers and corresponding to clockwise and counterclockwise rotations about the N-S bond were found; the calculated activation barriers of about 12 kcal/mol are in excellent agreement with those measured experimentally for the related molecule 1,3,5-tris(trifluoromethylsulfonyl)-1,3,5-triazinane (1). X-ray analysis proved the existence of the symmetric isomer of 3, which is the minor isomer in solutions but the only one in the crystal due to packing effects. The normal Perlin effect (JCHax < JCHeq)observed for 2(6)-CH2 in 3, whereas the reversed Perlin effect was found for the 4-CH2 group in 3 as well as for all CH2 groups in 1 both experimentally and theoretically. The latter effect in compounds 1, 3, and 1- (methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane (2) can be considered as a genuine reverse Perlin effect since larger values of 1JCH are observed for longer C-H bonds.}, language = {en} } @article{KietzkeEgbeHoerholdetal.2006, author = {Kietzke, Thomas and Egbe, Daniel A. M. and H{\"o}rhold, Hans-Heinrich and Neher, Dieter}, title = {Comparative study of M3EH-PPV-based bilayer photovoltaic devices}, issn = {4018-4022}, doi = {10.1021/Ma0601991}, year = {2006}, abstract = {We have recently shown that efficient polymer solar cells can be fabricated by using a weakly soluble derivative of poly-p-vinylene (M3EH-PPV) as the electron donor. Here we present studies on bilayer devices using organic electron acceptors with varying LUMO levels and M3EH-PPV. It is found that the open-circuit voltage scales linearly with the LUMO level of the acceptor, reaching values as high as 1.5 V when cyano-substituted poly(p-phenyleneethynylene)-alt- poly(p-phenylenevinylene) copolymers are used. Further, we discovered that for an increasing number of triple bonds in the repeat unit of the acceptor polymer the device performance decreases with increasing thickness of the acceptor layer. Also, the quantum efficiency was smaller when using polymers with higher LUMO levels. Thus, further effort is needed to design optimum acceptor polymers for devices exhibiting large open-circuit voltage and high quantum efficiency}, language = {en} } @article{SchmidtHermanns2006, author = {Schmidt, Bernd and Hermanns, Jolanda}, title = {Ring closing metathesis of substrates containing more than two C-C-double bonds : rapid access to functionalized heterocycles}, year = {2006}, abstract = {In most cases where ring closing metathesis is applied to the synthesis of heterocycles, alpha,omega-dienes are used as precursors. If substrates containing more than two double bonds are subjected to a metathesis reaction, carba- or heterocycles bearing additional exocyclic alkene functionality result, or multiple ring closing processes occur. This offers interesting and potentially very useful synthetic perspectives. On the other hand, selectivity problems need to be addressed as the cyclization of substrates with more than two double bonds available for olefin metathesis may result in constitutional isomers or stereoisomers. This review highlights problems and opportunities evolving from ring closing metathesis of tri-, tetra-, and polyenes as a strategy for the selective synthesis of functionalized heterocycles. The chapter on RCM of trienes is subdivided according to the symmetry of the metathesis precursor. The following two chapters deal with the double or multiple RCM of tetra- or polyenes. These processes are further classified according to the preferred cyclization mode. Finally, the application of cascade or domino metathesis reactions to the synthesis of heterocycles will be discussed. These processes can be classified into those where exclusively C-C-double bonds take part in the metathesis reaction, and those where one or more C-C-triple bonds are involved}, language = {en} } @article{KleinpeterKochMikhovaetal.2008, author = {Kleinpeter, Erich and Koch, Andreas and Mikhova, Bozhana and Stamboliyska, Bistra A. and Kolev, Tsonko M.}, title = {Quantification of the push-pull character of the isophorone chromophore as a measure of molecular hyperpolarizability for NLO applications}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2007.12.107}, year = {2008}, abstract = {The push-pull character of a series of para-phenyl substituted isophorone chromophores has been quantified by the 13C chemical shift difference of the three conjugated partial C=C double bonds and the quotient of the occupations of both the bonding and anti-bonding orbitals of these C=C double bonds as well. The correlations of the two push-pull quantifying parameters, and to the corresponding bond lengths, strongly recommend ;*c=c/ ;c=c as the general parameter to estimate charge alternation and as a very useful indication of the molecular hyperpolarizabilities for NLO application of the compounds studied.}, language = {en} } @article{HilleBergBresseletal.2008, author = {Hille, Carsten and Berg, Maik and Bressel, Lena and Munzke, Dorit and Primus, Philipp and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Dosche, Carsten}, title = {Time-domain fluorescence lifetime imaging for intracellular pH sensing in living tissues}, doi = {10.1007/s00216-008-2147-0}, year = {2008}, abstract = {pH sensing in living cells represents one of the most prominent topics in biochemistry and physiology. In this study we performed one-photon and two-photon time-domain fluorescence lifetime imaging with a laser-scanning microscope using the time-correlated single-photon counting technique for imaging intracellular pH levels. The suitability of different commercial fluorescence dyes for lifetime-based pH sensing is discussed on the basis of in vitro as well of in situ measurements. Although the tested dyes are suitable for intensity-based ratiometric measurements, for lifetime- based techniques in the time-domain so far only BCECF seems to meet the requirements of reliable intracellular pH recordings in living cells.}, language = {en} } @article{Stoecklein2006, author = {St{\"o}cklein, Walter F. M.}, title = {Molecule-detective}, year = {2006}, abstract = {Biosensors are analytical devices incorporating biological material (receptor) intimately associated with or integrated within a physicochernical transducer. Advantages are the high selectivity for analyte detection. Examples given comprise the very successful commercial blood glucose biosensors made for the self-control by the diabetic patients. Other biosensors are part of an analytic system, including the sensor chips Of surface plasmon resonance or interferometry based devices, piezoelectric or reflectometric sensors capable of direct measurement of mass changes, and thermometric and other reagentless sensors. The development of nanotubes-based devices allows for significant enhancment of the signal-to-noise ratio of the biosensors. A milestone on the way towards miniaturization and parallelization of biosensors is the recently developed and prize-winning electronic DNA chip}, language = {en} } @article{YenesewKiplagatDereseetal.2006, author = {Yenesew, Abiy and Kiplagat, John T. and Derese, Solomon and Midiwo, Jacob O. and Kabaru, Jacques M. and Heydenreich, Matthias and Peter, Martin G.}, title = {Two unusual rotenoid derivatives, 7a-O-methyl-12a-hydroxydeguelol and spiro-13-homo-13-oxaelliptone, from the seeds of Derris trifoliata}, doi = {10.1016/j.phytochem.2006.01.002}, year = {2006}, abstract = {The crude methanol extract of the seeds of Derris trifoliata showed potent and dose dependent larvicidal activity against the 2nd instar larvae of Aedes aegypti. From this extract two unusual rotenoid derivatives, a rotenoloid (named 7a-O-methyl-12a-hydroxydeguelol) and a spirohomooxarotenoid (named spiro-13-homo-13-oxaelliptone), were isolated and characterised. In addition a rare natural chromanone (6,7-dimethoxy-4-chromanone) and the known rotenoids rotenone, tephrosin and dehydrodeguelin were identified. The structures were assigned on the basis of spectroscopic evidence. The larvicidal activity of the crude extract is mainly due to rotenone. (c) 2006 Elsevier Ltd. All rights reserved}, language = {en} } @article{HoldtMuellerKellingetal.2006, author = {Holdt, Hans-J{\"u}rgen and M{\"u}ller, Holger and Kelling, Alexandra and Drexler, Hans-Joachim and M{\"u}ller, Thomas and Schwarze, Thomas and Schilde, Uwe and Starke, Ines}, title = {Mercury(II) chloride and iodide complexes of dithia- and tetrathiacrown ethers}, issn = {0044-2313}, doi = {10.1002/zaac.200500281}, year = {2006}, abstract = {The complexes [(HgCl2)(2)((ch)(2)30S(4)O(6))] (1), [HgCl,(mn21S(2)O(5))] (2), [HgCl2(ch18S(2)O(4))] (3) and [HgI(meb12S(2)O(2))](2)[Hg2I6] (4) have been synthesized, characterized and their crystal structures were determined. In [(HgCl2)(2)((ch)(2)3OS(4)O(6))] two HgCl2 units are discretely bonded within the ligand cavity of the 30-membered dichinoxaline-tetrathia-30-crown-10 ((ch)(2)30S(4)O(6)) forming a binuclear complex. HgCl2 forms I : I "in-cavity" complexes with the 21-membered maleonitrile-dithia-21-crown-7(mn21S(2)O(5)) ligand and the 18-membered chinoxaline- dithia-18-crown-6 (ch18S(2)O(4)) ligand, respectively. The 12-membered 4-methyl-benzo-dithia-12-crown-4 (meb12S(2)O(2)) ligand gave with two equivalents HgI2 the compound [HgI(meb12S(2)O(2))](2)[Hg2I6]. In the cation [HgI(meb12S(2)O(2))](+) meb12S(2)O(2) forms with the cation HgI+ a half-sandwich complex}, language = {en} } @article{NeuvonenFulopNeuvonenetal.2008, author = {Neuvonen, Helmi and Fulop, Ferenc and Neuvonen, Kari and Koch, Andreas and Kleinpeter, Erich}, title = {Electronic effects of heterocyclic ring systems as evaluated with the aid of 13C and 15N NMR chemical shifts and NBO analysis}, doi = {10.1002/Poc.1271}, year = {2008}, abstract = {The electronic effects of the 5- and 6-membered heterocyclic rings on the C=N-N unit of five different hydrazone derivatives of pyridine-2-, -3- and -4-carbaldehydes, pyrrole-2-carbaldehyde, furan-2- and -3-carbaldehydes and thiophene-2- and -3-carbaldehydes have been studied with the aid of 13C and 15N NMR measurements together with the natural bond orbital (NBO) analysis. As model compounds are used the corresponding substituted benzaldehyde derivatives. The polarization of the C=N unit of the hydrazone functionality of the heteroaryl derivatives occurs in an analogous manner with that of phenyl derivatives. The electron-withdrawing heteroaryl groups destabilize and the electron-donating groups stabilize the positive charge development at the CN carbon while the effect on the negative charge development is opposite. The 15N NMR chemical shift of the C=N and C=N-N nitrogens and the NBO charges at C=N-N unit can be correlated with the replacement substituent constants of the heteroaryl groups. 13C NMR shifts of the C=N carbon of N,N- dialkylhydrazones of the heteroarenecarbaldehydes can be correlated with a dual parameter equation possessing the polar substituent constant ;* of the heteroaryl group and the electronegativity of the heteroatom as variables.}, language = {en} } @article{SchweizerSchusterJungingeretal.2010, author = {Schweizer, S. and Schuster, T. and Junginger, Matthias and Siekmeyer, Gerd and Taubert, Andreas}, title = {Surface modification of ickel/Titanium Alloy and Titanium Surfaces via a Polyelectrolyte Multilayer/Calcium Phosphate Hybrid Coating}, issn = {1438-7492}, doi = {10.1002/mame.200900347}, year = {2010}, abstract = {The report shows that simple LbL deposition of positively charged chitosan and negatively charged heparin can be used to efficiently modify the native surface of both NiTi and Ti without any previous treatments. Moreover, mineralization of the polymer multilayers with calcium phosphate leads to surfaces with low contact angles around 70 and 20 degrees for NiTi and Ti, respectively. This suggests that a polymer multilayer/calcium phosphate hybrid coating could be useful for making NiTi or Ti implants that are at the same time antibacterial (via the chitosan), suppress blood clot formation (via the heparin), and favor fast endothelialization (via the improved surface hydrophilicity compared to the respective neat material).}, language = {en} } @article{SchwarzSieversBodenthinetal.2010, author = {Schwarz, Guntram and Sievers, Torsten K. and Bodenthin, Yves and Hasslauer, Ires and Geue, Thomas and Koetz, Joachim and Kurth, Dirk G.}, title = {The structure of metallo-supramolecular polyelectrolytes in solution and on surfaces}, issn = {0959-9428}, doi = {10.1039/B926783b}, year = {2010}, abstract = {Metal ion induced self-assembly of the rigid ligand 1,4-bis(2,2':6',2 ''-terpyridine- 4'-yl) benzene (1) with Fe(II), Co(II), Ni(II) and Zn(II) acetate in aqueous solution results in extended, rigid- rod like metallosupramolecular coordination polyelectrolytes (MEPE-1). Under the current experimental conditions the molar masses range from 1000 g mol(-1) up to 500 000 g mol(-1). The molar mass depends on concentration, stoichiometry, metal-ion and time. In addition, we present viscosity measurements, small angle neutron scattering and AFM data. We introduce a protocol to precisely control the stoichiometry during self-assembly using conductometry. The protocol can be used with different terpyridine ligands and the above-mentioned metal ions and is of paramount importance to obtain meaningful and reproducible results. As a control experiment we studied the mononuclear 4'- (phenyl)2,2':6',2 ''-terpyridine (3) complex with Ni(II) and Zn(II) and the flexible ligand 1,3- bis[4'-oxa(2,2': 6',2 ''-terpyridinyl)] propane (2) with Ni(II) acetate (Ni-MEPE-2). This ligand does not form extended macroassemblies but likely ring-like structures with 3 to 4 repeat units. Through spin- coating of Ni-MEPE-1 on a solid surface we can image the MEPEs in real space by AFM. SANS measurements of Fe-MEPE-1 verify the extended rigid-rod type structure of the MEPEs in aqueous solution.}, language = {en} } @article{KammerMuellerGrunwaldetal.2006, author = {Kammer, Stefan and M{\"u}ller, Holger and Grunwald, Nicolas and Bellin, Anja and Kelling, Alexandra and Schilde, Uwe and Mickler, Wulfhard and Dosche, Carsten and Holdt, Hans-J{\"u}rgen}, title = {Supramolecular assemblies with honeycomb structures by pi-pi stacking of octahedral metal complexes of 1,12- diazaperylene}, issn = {1343-1948}, doi = {10.1002/ejic.200600092}, year = {2006}, abstract = {Homoleptic Ni-II and Fe-II complexes of the "large-surface" phenanthroline-type ligand 1,12-diazaperylene (dap), [Ni(dap)(3)](BF4)(2) (1) and [Fe(dap)(3)](PF6)(2) (2), respectively, were synthesized. In the crystal structure the complex cation [M(dap)(3)](2+) (M = Ni, Fe) exhibits C-3 symmetry and interacts with three other cations by pi-pi stacking. It forms a new metalla-supramolecular assembly with a honeycomb structure containing nanochannels running parallel to the crystallographic c axis. Aggregation by pi-pi stacking between metal complexes of "large-surface" ligands should give new perspectives for inorganic supramolecular chemistry.}, language = {en} } @article{KatterleHolzwarthJesorka2006, author = {Katterle, Martin and Holzwarth, Alfred R. and Jesorka, Aldo}, title = {A Heck-type coupling for the synthesis of novel bridged metallochlorin-fullerene C-60 dyads}, issn = {1434-193X}, doi = {10.1002/ejoc.200500494}, year = {2006}, abstract = {A short and convenient synthesis of metallochlorin-C-60 dyads based on a Heck-type hetero coupling at the 3(2) position of a chlorin is described. p-Bromobenzaldehyde was treated with Zn-metalated 13(2)- demethoxycarbonylmethylpheophorbide a, using a palladium acetate/LiCl catalyst mixture under phase-transfer conditions in DMF at 70 degrees C. The resulting asymmetric olefin was obtained in a high trans/cis ratio. The desired trans isomer was separated and subsequently transformed into a donor-acceptor dyad by a 1,3-dipolar cycloaddition to C-60 in the presence of sarcosine in refluxing toluene. The resulting dyads are expected to undergo efficient photoinduced electron transfer and can potentially be utilized in solar energy conversion devices.}, language = {en} }