@article{KuhnlaReinthalerBrauneetal.2019, author = {Kuhnla, A. and Reinthaler, Markus and Braune, Steffen and Maier, A. and Pindur, Gerhard and Lendlein, Andreas and Jung, Friedrich}, title = {Spontaneous and induced platelet aggregation in apparently healthy subjects in relation to age}, series = {Clinical hemorheology and microcirculation : blood flow and vessels}, volume = {71}, journal = {Clinical hemorheology and microcirculation : blood flow and vessels}, number = {4}, publisher = {IOS Press}, address = {Amsterdam}, issn = {1386-0291}, doi = {10.3233/CH-199006}, pages = {425 -- 435}, year = {2019}, abstract = {Thrombotic disorders remain the leading cause of mortality and morbidity, despite the fact that anti-platelet therapies and vascular implants are successfully used today. As life expectancy is increasing in western societies, the specific knowledge about processes leading to thrombosis in elderly is essential for an adequate therapeutic management of platelet dysfunction and for tailoring blood contacting implants. This study addresses the limited available data on platelet function in apparently healthy subjects in relation to age, particularly in view of subjects of old age (80-98 years). Apparently healthy subjects between 20 and 98 years were included in this study. Platelet function was assessed by light transmission aggregometry and comprised experiments on spontaneous as well as ristocetin-, ADP- and collagen-induced platelet aggregation. The data of this study revealed a non-linear increase in the maximum spontaneous platelet aggregation (from 3.3\% +/- 3.3\% to 10.9\% +/- 5.9\%). The maximum induced aggregation decreased with age for ristocetin (from 85.8\% +/- 7.2\% to 75.0\% +/- 7.8\%), ADP (from 88.5\% +/- 4.6\% to 64.8\% +/- 7.3\%) and collagen (from 89.5\% +/- 3.0\% to 64.0\% +/- 4.0\%) in a non-linear manner (linear regression analysis). These observations indicate that during aging, circulating platelets become increasingly activated but lose their full aggregatory potential, a phenomenon that was earlier termed "platelet exhaustion". In this study we extended the limited existing data for spontaneous and induced platelet aggregation of apparently healthy donors above the age of 75 years. The presented data indicate that the extrapolation of data from a middle age group does not necessarily predict platelet function in apparently healthy subjects of old age. It emphasizes the need for respective studies to improve our understanding of thrombotic processes in elderly humans.}, language = {en} } @article{DengZouWangetal.2019, author = {Deng, Zijun and Zou, Jie and Wang, Weiwei and Nie, Yan and Tung, Wing-Tai and Ma, Nan and Lendlein, Andreas}, title = {Dedifferentiation of mature adipocytes with periodic exposure to cold}, series = {Clinical hemorheology and microcirculation : blood flow and vessels}, volume = {71}, journal = {Clinical hemorheology and microcirculation : blood flow and vessels}, number = {4}, publisher = {IOS Press}, address = {Amsterdam}, issn = {1386-0291}, doi = {10.3233/CH-199005}, pages = {415 -- 424}, year = {2019}, abstract = {Lipid-containing adipocytes can dedifferentiate into fibroblast-like cells under appropriate culture conditions, which are known as dedifferentiated fat (DFAT) cells. However, the relative low dedifferentiation efficiency with the established protocols limit their widespread applications. In this study, we found that adipocyte dedifferentiation could be promoted via periodic exposure to cold (10 degrees C) in vitro. The lipid droplets in mature adipocytes were reduced by culturing the cells in periodic cooling/heating cycles (10-37 degrees C) for one week. The periodic temperature change led to the down-regulation of the adipogenic genes (FABP4, Leptin) and up-regulation of the mitochondrial uncoupling related genes (UCP1, PGC-1 alpha, and PRDM16). In addition, the enhanced expression of the cell proliferation marker Ki67 was observed in the dedifferentiated fibroblast-like cells after periodic exposure to cold, as compared to the cells cultured in 37 degrees C. Our in vitro model provides a simple and effective approach to promote lipolysis and can be used to improve the dedifferentiation efficiency of adipocytes towards multipotent DFAT cells.}, language = {en} } @article{MazurekBudzynskaRazzaqBehletal.2019, author = {Mazurek-Budzynska, Magdalena and Razzaq, Muhammad Yasar and Behl, Marc and Lendlein, Andreas}, title = {Shape-Memory Polymers}, series = {Functional Polymers}, journal = {Functional Polymers}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-95987-0}, issn = {2510-3458}, doi = {10.1007/978-3-319-95987-0_18}, pages = {605 -- 663}, year = {2019}, abstract = {Shape-memory polymers (SMPs) are stimuli-sensitive materials capable of changing their shape on demand. A shape-memory function is a result of the polymer architecture together with the application of a specific programming procedure. Various possible mechanisms to induce the shape-memory effect (SME) can be realized, which can be based on thermal transitions of switching domains or on reversible molecular switches (e.g., supramolecular interactions, reversible covalent bonds). Netpoints, which connect the switching domains and determine the permanent shape, can be either provided by covalent bonds or by physical intermolecular interactions, such as hydrogen bonds or crystallites. This chapter reviews different ways of implementing the phenomenon of programmable changes in the polymer shape, including the one-way shape-memory effect (1-W SME), triple-and multi-shape effects (TSE/ MSE), the temperature-memory effect (TME), and reversible shape-memory effects, which can be realized in constant stress conditions (rSME), or in stress-free conditions (reversible bidirectional shape-memory effect (rbSME)). Furthermore, magnetically actuated SMPs and shape-memory hydrogels (SMHs) are described to show the potential of the SMP technology in biomedical applications and multifunctional approaches.}, language = {en} } @article{FolikumahNeffeBehletal.2019, author = {Folikumah, Makafui Yao and Neffe, Axel T. and Behl, Marc and Lendlein, Andreas}, title = {Thiol Michael-Type reactions of optically active mercapto-acids in aqueous medium}, series = {MRS advances : a journal of the Materials Research Society}, volume = {4}, journal = {MRS advances : a journal of the Materials Research Society}, number = {46-47}, publisher = {Springer Nature Switzerland AG}, address = {Cham}, issn = {2059-8521}, doi = {10.1557/adv.2019.308}, pages = {2515 -- 2525}, year = {2019}, abstract = {Defined chemical reactions in a physiological environment are a prerequisite for the in situ synthesis of implant materials potentially serving as matrix for drug delivery systems, tissue fillers or surgical glues. 'Click' reactions like thiol Michael-type reactions have been successfully employed as bioorthogonal reaction. However, due to the individual stereo-electronic and physical properties of specific substrates, an exact understanding their chemical reactivity is required if they are to be used for in-situ biomaterial synthesis. The chiral (S)-2-mercapto-carboxylic acid analogues of L-phenylalanine (SH-Phe) and L-leucine (SH-Leu) which are subunits of certain collagenase sensitive synthetic peptides, were explored for their potential for in-situ biomaterial formation via the thiol Michael-type reaction. In model reactions were investigated the kinetics, the specificity and influence of stereochemistry of this reaction. We could show that only reactions involving SH-Leu yielded the expected thiol-Michael product. The inability of SH-Phe to react was attributed to the steric hindrance of the bulky phenyl group. In aqueous media, successful reaction using SH-Leu is thought to proceed via the sodium salt formed in-situ by the addition of NaOH solution, which was intented to aid the solubility of the mercapto-acid in water. Fast reaction rates and complete acrylate/maleimide conversion were only realized at pH 7.2 or higher suggesting the possible use of SH-Leu under physiological conditions for thiol Michael-type reactions. This method of in-situ formed alkali salts could be used as a fast approach to screen mercapto-acids for thio Michael-type reactions without the synthesis of their corresponding esters.}, language = {en} } @article{FriessWischkeLendlein2019, author = {Friess, Fabian and Wischke, Christian and Lendlein, Andreas}, title = {Microscopic analysis of shape-shiftable oligo(epsilon-caprolactone)-based particles}, series = {MRS advances}, volume = {4}, journal = {MRS advances}, number = {59-60}, publisher = {Cambridge Univ. Press}, address = {New York}, issn = {2059-8521}, doi = {10.1557/adv.2019.392}, pages = {3199 -- 3206}, year = {2019}, abstract = {Spherical particles are routinely monitored and described by hydrodynamic diameters determined, e.g., by light scattering techniques. Non-spherical particles such as prolate ellipsoids require alternative techniques to characterize particle size as well as particle shape. In this study, oligo(epsilon-caprolactone) (oCL) based micronetwork (MN) particles with a shape-shifting function based on their shape-memory capability were programmed from spherical to prolate ellipsoidal shape aided by incorporation and stretching in a water-soluble phantom matrix. By applying light microscopy with automated contour detection and aspect ratio analysis, differences in characteristic aspect ratio distributions of non-crosslinked microparticles (MPs) and crosslinked MNs were detected when the degrees of phantom elongation (30-290\%) are increased. The thermally induced shape recovery of programmed MNs starts in the body rather than from the tips of ellipsoids, which may be explained based on local differences in micronetwork deformation. By this approach, fascinating intermediate particle shapes with round bodies and two opposite sharp tips can be obtained, which could be of interest, e.g., in valves or other technical devices, in which the tips allow to temporarily encage the switchable particle in the desired position.}, language = {en} } @article{VogelEbelHecketal.2019, author = {Vogel, Stefanie and Ebel, Kenny and Heck, Christian and Sch{\"u}rmann, Robin Mathis and Milosavljevic, Aleksandar R. and Giuliani, Alexandre and Bald, Ilko}, title = {Vacuum-UV induced DNA strand breaks}, series = {Physical chemistry, chemical physics : a journal of European Chemical Societies}, volume = {21}, journal = {Physical chemistry, chemical physics : a journal of European Chemical Societies}, number = {4}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1463-9076}, doi = {10.1039/c8cp06813e}, pages = {1972 -- 1979}, year = {2019}, abstract = {Radiation therapy is a basic part of cancer treatment. To increase the DNA damage in carcinogenic cells and preserve healthy tissue at the same time, radiosensitizing molecules such as halogenated nucleobase analogs can be incorporated into the DNA during the cell reproduction cycle. In the present study 8.44 eV photon irradiation induced single strand breaks (SSB) in DNA sequences modified with the radiosensitizer 5-bromouracil (U-5Br) and 8-bromoadenine ((8Br)A) are investigated. U-5Br was incorporated in the 13mer oligonucleotide flanked by different nucleobases. It was demonstrated that the highest SSB cross sections were reached, when cytosine and thymine were adjacent to U-5Br, whereas guanine as a neighboring nucleobase decreases the activity of U-5Br indicating that competing reaction mechanisms are active. This was further investigated with respect to the distance of guanine to U-5Br separated by an increasing number of adenine nucleotides. It was observed that the SSB cross sections were decreasing with an increasing number of adenine spacers between guanine and U-5Br until the SSB cross sections almost reached the level of a non-modified DNA sequence, which demonstrates the high sequence dependence of the sensitizing effect of U-5Br. (8Br)A was incorporated in a 13mer oligonucleotide as well and the strand breaks were quantified upon 8.44 eV photon irradiation in direct comparison to a non-modified DNA sequence of the same composition. No clear enhancement of the SSB yield of the modified in comparison to the non-modified DNA sequence could be observed. Additionally, secondary electrons with a maximum energy of 3.6 eV were generated when using Si as a substrate giving rise to further DNA damage. A clear enhancement in the SSB yield can be ascertained, but to the same degree for both the non-modified DNA sequence and the DNA sequence modified with (8Br)A.}, language = {en} } @article{PoghosyanAdamyanShahinyanetal.2019, author = {Poghosyan, Armen H. and Adamyan, Maksim P. and Shahinyan, Aram A. and Koetz, Joachim}, title = {AOT Bilayer Adsorption on Gold Surfaces}, series = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, volume = {123}, journal = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, number = {4}, publisher = {American Chemical Society}, address = {Washington}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.8b11471}, pages = {948 -- 953}, year = {2019}, abstract = {A molecular dynamics study was done to reveal the adsorption properties of sodium dioctyl sulfosuccinate (AOT) bilayers on gold Au(111) surfaces. Examining the rotational mobility of AOT molecules, we track that the correlation time of AOT molecules on the adsorbed layer is much higher. The data estimating the diffusive motion of AOT molecule show a substantially lower rate of diffusion (similar to 10(-10) cm(2)/s) in the adsorbed layers in comparison to other ones. The results show that an adsorbed layer is more rigid, whereas the outer layers undergo considerable lateral and vertical fluctuations.}, language = {en} } @article{LendleinGould2019, author = {Lendlein, Andreas and Gould, Oliver E. C.}, title = {Reprogrammable recovery and actuation behaviour of shape-memory polymers}, series = {Nature reviews. Materials}, volume = {4}, journal = {Nature reviews. Materials}, number = {2}, publisher = {Nature Publ. Group}, address = {London}, issn = {2058-8437}, doi = {10.1038/s41578-018-0078-8}, pages = {116 -- 133}, year = {2019}, abstract = {Shape memory is the capability of a material to be deformed and fixed into a temporary shape. Recovery of the original shape can then be triggered only by an external stimulus. Shape-memory polymers are highly deformable materials that can be programmed to recover a memorized shape in response to a variety of environmental and spatially localized stimuli as a one-way effect. The shape-memory function can also be generated as a reversible effect enabling actuation behaviour through macroscale deformation and processing, specifically by dictating the macromolecular orientation of actuation units and of the skeleton structure of geometry-determining units in the polymers. Shape-memory polymers can be programmed and reprogrammed into arbitrary shapes. Both recovery and actuation behaviour are reprogrammable. In this Review, we outline the common basis and key differences between the two shape-memory behaviours of polymers in terms of mechanism, fabrication schemes and characterization methods. We discuss which combination of macromolecular architecture and macroscale processing is necessary for coordinated, decentralized and responsive physical behaviour. The extraction of relevant thermomechanical information is described, and design criteria are shown for microscale and macroscale morphologies to gain high levels of recovered or actuation strains as well as on-demand 2D-to-3D shape transformations. Finally, real-world applications and key future challenges are highlighted.}, language = {en} } @article{KocSchoenemannArnuthalingametal.2019, author = {Koc, Julian and Sch{\"o}nemann, Eric and Arnuthalingam, Ajitha and Clarke, Jessica L. and Finlay, John A. and Clare, Anthony S. and Laschewsky, Andre and Rosenhahn, Axel}, title = {Low-fouling thin hydrogel coatings made of photo-cross-linked polyzwitterions}, series = {Langmuir}, volume = {35}, journal = {Langmuir}, number = {5}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.8b02799}, pages = {1552 -- 1562}, year = {2019}, abstract = {Although zwitterionic chemistries are among the most promising materials for producing nonfouling surfaces, their structural diversity has been low until now. Here, we compare the in vitro fouling behavior of a set of four systematically varied sulfa-/sulfobetaine-containing zwitterionic hydrogel coatings against a series of proteins and nonmotile as well as motile marine organisms as model foulers. The coatings are prepared by simultaneous photoinduced cross-linking and surface anchoring to elucidate the effect of the molecular structure of the zwitterionic moieties on their antifouling activity. Analogously prepared coatings of poly(butyl methacrylate) and poly(oligoethylene glycol methacrylate) serve as references. Photoreactive polymers are synthesized by the statistical copolymerization of sulfobetaine or sulfabetaine methacrylates and methacrylamides with a benzophenone derivative of 2-hydroxyethyl methacrylate and are applied as a thin film coating. While keeping the density of the zwitterionic and cross-linker groups constant, the molecular structure of the zwitterionic side chains is varied systematically, as is the arrangement of the ion pairs in the side chain by changing the classical linear geometry to a novel Y-shaped geometry. All of the polyzwitterions strongly reduce fouling compared to poly(butyl methacrylate). Overall, the sulfabetaine polyzwitterion coatings studied matches the high antifouling effectiveness of oligo(ethylene glycol)-based ones used as a control. Nevertheless, performances varied individually for a given pair of polymer and fouler. The case of the polysulfobetaines exemplifies that minor chemical changes in the polymer structure affect the antifouling performance markedly. Accordingly, the antifouling performance of such polymers cannot be correlated simply to the type of zwitterion used (which could be generally ranked as better performing or poorer performing) but is a result of the polymer's precise chemical structure. Our findings underline the need to enlarge the existing structural diversity of polyzwitterions for antifouling purposes to optimize the potential of their chemical structure.}, language = {en} } @article{LaschewskyRosenhahn2019, author = {Laschewsky, Andr{\´e} and Rosenhahn, Axel}, title = {Molecular design of zwitterionic polymer interfaces}, series = {Langmuir}, volume = {35}, journal = {Langmuir}, number = {5}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.8b01789}, pages = {1056 -- 1071}, year = {2019}, abstract = {The widespread occurrence of zwitterionic compounds in nature has incited their frequent use in designing biomimetic materials. Therefore, zwitterionic polymers are a thriving field. A particular interest for this particular polymer class has currently focused on their use in establishing neutral, low-fouling surfaces. After highlighting strategies to prepare model zwitterionic surfaces as well as those that are more suitable for practical purposes relying strongly on radical polymerization methods, we present recent efforts to diversify the structure of the hitherto quite limited variety of zwitterionic monomers and of the derived polymers. We identify key structural variables, consider their influence on essential properties such as overall hydrophilicity and long-term stability, and discuss promising targets for the synthesis of new variants.}, language = {en} } @article{ZhangKochovskiLeeetal.2019, author = {Zhang, Su-Yun and Kochovski, Zdravko and Lee, Hui-Chun and Lu, Yan and Zhang, Hemin and Zhang, Jie and Sun, Jian-Ke and Yuan, Jiayin}, title = {Ionic organic cage-encapsulating phase-transferable metal clusters}, series = {Chemical science}, volume = {10}, journal = {Chemical science}, number = {5}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2041-6520}, doi = {10.1039/c8sc04375b}, pages = {1450 -- 1456}, year = {2019}, abstract = {Exploration of metal clusters (MCs) adaptive to both aqueous and oil phases without disturbing their size is promising for a broad scope of applications. The state-of-the-art approach via ligand-binding may perturb MCs' size due to varied metal-ligand binding strength when shuttling between solvents of different polarity. Herein, we applied physical confinement of a series of small noble MCs (<1 nm) inside ionic organic cages (I-Cages), which by means of anion exchange enables reversible transfer of MCs between aqueous and hydrophobic solutions without varying their ultrasmall size. Moreover, the MCs@I-Cage hybrid serves as a recyclable, reaction-switchable catalyst featuring high activity in liquid-phase NH3BH3 (AB) hydrolysis reaction with a turnover frequency (TOF) of 115 min-1.}, language = {en} } @article{ZuAmsalemEggeretal.2019, author = {Zu, Fengshuo and Amsalem, Patrick and Egger, David A. and Wang, Rongbin and Wolff, Christian Michael and Fang, Honghua and Loi, Maria Antonietta and Neher, Dieter and Kronik, Leeor and Duhm, Steffen and Koch, Norbert}, title = {Constructing the Electronic Structure of CH3NH3PbI3 and CH3NH3PbBr3 Perovskite Thin Films from Single-Crystal Band Structure Measurements}, series = {The journal of physical chemistry letters}, volume = {10}, journal = {The journal of physical chemistry letters}, number = {3}, publisher = {American Chemical Society}, address = {Washington}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.8b03728}, pages = {601 -- 609}, year = {2019}, abstract = {Photovoltaic cells based on halide perovskites, possessing remarkably high power conversion efficiencies have been reported. To push the development of such devices further, a comprehensive and reliable understanding of their electronic properties is essential but presently not available. To provide a solid foundation for understanding the electronic properties of polycrystalline thin films, we employ single-crystal band structure data from angle-resolved photoemission measurements. For two prototypical perovskites (CH3NH3PbBr3 and CH3NH3PbI3), we reveal the band dispersion in two high-symmetry directions and identify the global valence band maxima. With these benchmark data, we construct "standard" photoemission spectra from polycrystalline thin film samples and resolve challenges discussed in the literature for determining the valence band onset with high reliability. Within the framework laid out here, the consistency of relating the energy level alignment in perovskite-based photovoltaic and optoelectronic devices with their functional parameters is substantially enhanced.}, language = {en} } @article{AlNakeebKochovskiLietal.2019, author = {Al Nakeeb, Noah and Kochovski, Zdravko and Li, Tingting and Zhang, Youjia and Lu, Yan and Schmidt, Bernhard V. K. J.}, title = {Poly(ethylene glycol) brush-b-poly(N-vinylpyrrolidone)-based double hydrophilic block copolymer particles crosslinked via crystalline alpha-cyclodextrin domains}, series = {RSC Advances}, volume = {9}, journal = {RSC Advances}, number = {9}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2046-2069}, doi = {10.1039/c8ra10672j}, pages = {4993 -- 5001}, year = {2019}, abstract = {Self-assembly of block copolymers is a significant area of polymer science. The self-assembly of completely water-soluble block copolymers is of particular interest, albeit a challenging task. In the present work the self-assembly of a linear-brush architecture block copolymer, namely poly(N-vinylpyrrolidone)-b-poly(oligoethylene glycol methacrylate) (PVP-b-POEGMA), in water is studied. Moreover, the assembled structures are crosslinked via alpha-CD host/guest complexation in a supramolecular way. The crosslinking shifts the equilibrium toward aggregate formation without switching off the dynamic equilibrium of double hydrophilic block copolymer (DHBC). As a consequence, the self-assembly efficiency is improved without extinguishing the unique DHBC self-assembly behavior. In addition, decrosslinking could be induced without a change in concentration by adding a competing complexation agent for alpha-CD. The self-assembly behavior was followed by DLS measurement, while the presence of the particles could be observed via cryo-TEM before and after crosslinking.}, language = {en} } @article{SardarianInalooModarresiAlametal.2019, author = {Sardarian, Ali Reza and Inaloo, Iman Dindarloo and Modarresi-Alam, Ali Reza and Kleinpeter, Erich and Schilde, Uwe}, title = {Metal-Free Regioselective Monocyanation of Hydroxy-, Alkoxy-, and Benzyloxyarenes by Potassium Thiocyanate and Silica Sulfuric Acid as a Cyanating Agent}, series = {The journal of organic chemistry}, volume = {84}, journal = {The journal of organic chemistry}, number = {4}, publisher = {American Chemical Society}, address = {Washington}, issn = {0022-3263}, doi = {10.1021/acs.joc.8b02191}, pages = {1748 -- 1756}, year = {2019}, abstract = {A novel and efficient metal- and solvent-free regioselective para-C-H cyanation of hydroxy-, alkoxy-, and benzyloxyarene derivatives has been introduced, using nontoxic potassium thiocyanate as a cyanating reagent in the presence of silica sulfuric acid (SSA). The desired products are obtained in good to high yields without any toxic byproducts.}, language = {en} } @article{SarhanElNagarAbouserieetal.2019, author = {Sarhan, Radwan Mohamed and El-Nagar, Gumaa A. and Abouserie, Ahed and Roth, Christina}, title = {Silver-Iron Hierarchical Microflowers for Highly Efficient H2O2 Nonenzymatic Amperometric Detection}, series = {ACS sustainable chemistry \& engineering}, volume = {7}, journal = {ACS sustainable chemistry \& engineering}, number = {4}, publisher = {American Chemical Society}, address = {Washington}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.8b06182}, pages = {4335 -- 4342}, year = {2019}, abstract = {This study addresses the fabrication of monodispersed iron-doped silver meso-hierarchical flower-like structures via a facile chemical procedure. The morphology of the obtained silver particles has been tuned by changing the concentration of the structure-directing agent (malonic acid). Ball-shaped silver particles were formed in the absence of malonic acid (MA), while silver particles with craspedia-globosa, chrysanthemum, and dahlia flower-like structures were obtained in the presence of 0.2, 0.5, and 1 mM malonic acid, respectively. The doping of these dahlia flower-like structures with trace amounts of iron (<= 5\% Fe weight percent) led to the formation of globe-amaranth iron-doped microflowers (AgFeamaranth). The as-prepared AgFeamaranth exhibited better performance as a nonenzymatic H2O2 sensor compared to undoped silver particles as demonstrated by their higher catalytic activity and stability together with superior sensitivity (1350 mu M-1 cm(-2), 61 times higher) and lower detection limit (0.1 mu M). These enhancements are attributed to the AgFe unique flower-like structures and to the fact that the iron dopants provide a higher number of electroactive sites and reduce the charge transfer resistance of H2O2 reduction. Additionally, the good stability of AgFe is believed to originate from the faster detachment rate of the in situ-formed gas bubbles from their surfaces compared to undoped silver structures.}, language = {en} } @article{GrosskopfTierschKoetzetal.2019, author = {Großkopf, S{\"o}ren and Tiersch, Brigitte and Koetz, Joachim and Mix, Andreas and Hellweg, Thomas}, title = {Shear-Induced Transformation of Polymer-Rich Lamellar Phases to Micron-Sized Vesicles}, series = {Langmuir}, volume = {35}, journal = {Langmuir}, number = {8}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.8602786}, pages = {3048 -- 3057}, year = {2019}, abstract = {In the present work, we study the shear-induced transformation of polymer-rich lamellar phases into vesicles. The evolution of vesicle size is studied by different scattering techniques, rheology, and microscopy methods. The lamellar phase found in the system D2O/o-xylene/Pluronic PE9400/C(8)TAB can be fully transformed to multilamellar vesicles (MLVs) by applying shear. The size of the MLVs is proportional to the inverse square root of the shear rate. Hence, the polymer based quaternary system behaves similar to lamellar phases based on small surfactant molecules. Additionally, we found a growth effect leading to a size increase of the vesicles after shearing was stopped.}, language = {en} } @article{PrellerRungeBorchertZellmeretal.2019, author = {Preller, Tobias and Runge-Borchert, Gundula and Zellmer, Sabrina and Menzel, Dirk and Saein, Saeid Azimi and Peters, Jan and Raatz, Annika and Tiersch, Brigitte and Koetz, Joachim and Garnweitner, Georg}, title = {Particle-reinforced and functionalized hydrogels for SpineMan, a soft robotics application}, series = {Journal of materials science}, volume = {54}, journal = {Journal of materials science}, number = {5}, publisher = {Springer}, address = {New York}, issn = {0022-2461}, doi = {10.1007/s10853-018-3106-6}, pages = {4444 -- 4456}, year = {2019}, abstract = {SpineMan is designed as a prototype of a soft robotic manipulator that is constructed of alternating hard and soft segments similar to the human spine. Implementing such soft segments allows to surpass the rigidity of conventional robots and ensures safer workspaces where humans and machines can work side by side with less stringent safety restrictions. Therefore, we used a hydrogel as viscoelastic material consisting of poly(vinyl alcohol) and borax. The mechanical properties of the hydrogel were tailored by embedding silica particles of various particles sizes as well as in different mass fractions. Increased mass contents as well as larger particle sizes led to strongly enhanced rigidity with a more than doubled storage modulus of the composite compared to the pure hydrogel. Furthermore, specific functionalities were induced by the incorporation of superparamagnetic Fe3O4 nanoparticles that can in principle be used for sensing robotic motion and detecting malfunctions. Therefore, we precisely adjusted the saturation magnetization of the soft segments using defined mass contents of the nanoparticles. To ensure long-time shape stability and prevention of atmospheric influences on the prepared composites, a silicone skin of specific shore hardness was used. The composites and the soft segments were characterized by oscillation measurements, cryo-SEM, bending tests and SQUID measurements, which give insights into the properties in the passive and in the moving state of SpineMan. The utilization of tailored composites led to highly flexible, reinforced and functional soft segments, which ensure stability, easy movability by springs of the shape memory alloy nitinol and prevention of total failure.}, language = {en} } @article{BhuvaneshMachatschekLysyakovaetal.2019, author = {Bhuvanesh, Thanga and Machatschek, Rainhard Gabriel and Lysyakova, Liudmila and Kratz, Karl and Schulz, Burkhard and Ma, Nan and Lendlein, Andreas}, title = {Collagen type-IV Langmuir and Langmuir-Schafer layers as model biointerfaces to direct stem cell adhesion}, series = {Biomedical materials : materials for tissue engineering and regenerative medicine}, volume = {14}, journal = {Biomedical materials : materials for tissue engineering and regenerative medicine}, number = {2}, publisher = {Inst. of Physics Publ.}, address = {Bristol}, issn = {1748-6041}, doi = {10.1088/1748-605X/aaf464}, pages = {17}, year = {2019}, abstract = {In biomaterial development, the design of material surfaces that mimic the extra-cellular matrix (ECM) in order to achieve favorable cellular instruction is rather challenging. Collagen-type IV (Col-IV), the major scaffolding component of Basement Membranes (BM), a specialized ECM with multiple biological functions, has the propensity to form networks by self-assembly and supports adhesion of cells such as endothelial cells or stem cells. The preparation of biomimetic Col-IV network-like layers to direct cell responses is difficult. We hypothesize that the morphology of the layer, and especially the density of the available adhesion sites, regulates the cellular adhesion to the layer. The Langmuir monolayer technique allows for preparation of thin layers with precisely controlled packing density at the air-water (A-W) interface. Transferring these layers onto cell culture substrates using the Langmuir-Schafer (LS) technique should therefore provide a pathway for preparation of BM mimicking layers with controlled cell adherence properties. In situ characterization using ellipsometry and polarization modulation-infrared reflection absorption spectroscopy of Col-IV layer during compression at the A-W interface reveal that there is linear increase of surface molecule concentration with negligible orientational changes up to a surface pressure of 25 mN m(-1). Smooth and homogeneous Col-IV network-like layers are successfully transferred by LS method at 15 mN m(-1) onto poly(ethylene terephthalate) (PET), which is a common substrate for cell culture. In contrast, the organization of Col-IV on PET prepared by the traditionally employed solution deposition method results in rather inhomogeneous layers with the appearance of aggregates and multilayers. Progressive increase in the number of early adherent mesenchymal stem cells (MSCs) after 24 h by controlling the areal Col-IV density by LS transfer at 10, 15 and 20 mN m(-1) on PET is shown. The LS method offers the possibility to control protein characteristics on biomaterial surfaces such as molecular density and thereby, modulate cell responses.}, language = {en} } @article{HeroldAignerGrilletal.2019, author = {Herold, Heike M. and Aigner, Tamara Bernadette and Grill, Carolin E. and Kr{\"u}ger, Stefanie and Taubert, Andreas and Scheibel, Thomas R.}, title = {SpiderMAEn}, series = {Bioinspired, Biomimetic and Nanobiomaterials}, volume = {8}, journal = {Bioinspired, Biomimetic and Nanobiomaterials}, number = {1}, publisher = {ICE Publishing}, address = {Westminister}, issn = {2045-9858}, doi = {10.1680/jbibn.18.00007}, pages = {99 -- 108}, year = {2019}, abstract = {A growing energy demand requires new and preferably renewable energy sources. The infinite availability of solar radiation makes its conversion into storable and transportable energy forms attractive for research as well as for the industry. One promising example of a transportable fuel is hydrogen (H-2), making research into eco-friendly hydrogen production meaningful. Here, a hybrid system was developed using newly designed recombinant spider silk protein variants as a template for mineralization with inorganic titanium dioxide and gold. These bioinspired organic/inorganic hybrid materials allow for hydrogen production upon light irradiation. To begin with, recombinant spider silk proteins bearing titanium dioxide and gold-binding moieties were created and processed into structured films. These films were modified with gold and titanium dioxide in order to produce a photocatalyst. Subsequent testing revealed hydrogen production as a result of light-induced hydrolysis of water. Therefore, the novel setup presented here provides access to a new principle of generating advanced hybrid materials for sustainable hydrogen production and depicts a promising platform for further studies on photocatalytic production of hydrogen, the most promising future fuel.}, language = {en} } @article{JiangMansfeldKratzetal.2019, author = {Jiang, Yi and Mansfeld, Ulrich and Kratz, Karl and Lendlein, Andreas}, title = {Programmable microscale stiffness pattern of flat polymeric substrates by temperature-memo technology}, series = {MRS Communications}, volume = {9}, journal = {MRS Communications}, number = {1}, publisher = {Cambridge Univ. Press}, address = {New York}, issn = {2159-6859}, doi = {10.1557/mrc.2019.24}, pages = {181 -- 188}, year = {2019}, abstract = {Temperature-memory technology was utilized to generate flat substrates with a programmable stiffness pattern from cross-linked poly(ethylene-co-vinyl acetate) substrates with cylindrical microstructures. Programmed substrates were obtained by vertical compression at temperatures in the range from 60 to 100 degrees C and subsequent cooling, whereby a flat substrate was achieved by compression at 72 degrees C, as documented by scanning electron microscopy and atomic force microscopy (AFM). AFM nanoindentation experiments revealed that all programmed substrates exhibited the targeted stiffness pattern. The presented technology for generating polymeric substrates with programmable stiffness pattern should be attractive for applications such as touchpads. optical storage, or cell instructive substrates.}, language = {en} }