@article{PenaHamannRuizetal.2004, author = {Pena, M. and Hamann, Wolf-Rainer and Ruiz, M. T. and Peimbert, A. and Peimbert, M.}, title = {A high resolution spectroscopic study of the extraordinary planetary nebula LMC-N66}, year = {2004}, abstract = {The planetary nebula N66 in the Large Magellanic Cloud is an extraordinary object, as it is the only confirmed PN where the central star is a Wolf-Rayet star of the nitrogen sequence, i.e. of type [WN]. Moreover, the star showed a dramatic brightness outburst in 1993-1994. In a previous paper (Hamann et al. 2003) we analyzed the changing stellar spectra and found evidence that the central star is most likely a binary system where a white dwarf presently accretes matter from a non-degenerate companion at a high rate. Thus the object is a candidate for a future type Ia supernova in our cosmic neighborhood. In the present paper we analyze the morphology and kinematics of the nebula, using images and high-resolution spectra obtained with the Hubble Space Telescope (HST) and the Very Large Telescope (ESO-VLT). The object presents a complex multipolar structure, dominated by very bright lobes located at both sides of the central star and separated by a narrow waist. In addition there is a pair of very extended and twisted loops, also pointing in opposite directions; their symmetry axis and collimation angle differs from those of the bright lobes. High resolution spectroscopy reveals two main velocity components, "approaching" material at an average heliocentric radial velocity Of V-rad = 248 30 km s(-1) and similarly bright "receding" material at V-rad = 331 +/- 25 km s(-1). A systemic velocity of about 300 km s(-1) is derived. Opposite lobes and loops possess opposite velocities. Furthermore there are knots and filaments of complex structure and kinematics. Close to the central star, nebular gas is found, receding at very high velocity (125 km s(-1) relative to the system). The morphology and kinematics of LMC-N66 can be explained as the result of episodic bipolar ejections with changing axis. The bipolar structures could have been produced by collimated streams ejected from a precessing central source. We suggest that the precession could have been produced by an external torque, possibly due to a binary companion. Young, fast-moving nebular knots close to the star appear slightly He- and N-richer than the main body of the nebula, but are still hydrogen-rich in contrast to the helium-dominated atmosphere of the [WN]- type central star. In the binary scenario, this nebular matter must have been accreted from the non-degenerate companion and re-ejected before it was fully burnt}, language = {en} } @article{KlingSchneidenbachSchnor2005, author = {Kling, Christoph and Schneidenbach, Lars and Schnor, Bettina}, title = {A high performance gigabit ethernet messaging method for PVFS}, isbn = {0-88986-525-6}, year = {2005}, abstract = {Parallel File Systems like PVFS2 are a necessary compo nent for high-performance computing. The design of ef ;cient communication layers for these systems is still of great research interest. This paper presents a low- latency messaging method for PVFS2 dedicated for Gigabit Ether net networks and discusses relevant design issues. In con trast to other approaches, we argue that zero-copying can be achieved also for big messages without use of a rendez vous protocol. Further, ef;ciency within the communica tion layer like a small call stack plays an important role.}, language = {en} } @article{Fischer2012, author = {Fischer, Martin H.}, title = {A hierarchical view of grounded, embodied, and situated numerical cognition}, series = {Cognitive processing : international quarterly of cognitive science}, volume = {13}, journal = {Cognitive processing : international quarterly of cognitive science}, publisher = {Springer}, address = {Heidelberg}, issn = {1612-4782}, doi = {10.1007/s10339-012-0477-5}, pages = {S161 -- S164}, year = {2012}, abstract = {There is much recent interest in the idea that we represent our knowledge together with the sensory and motor features that were activated during its acquisition. This paper reviews the evidence for such "embodiment" in the domain of numerical cognition, a traditional stronghold of abstract theories of knowledge representation. The focus is on spatial-numerical associations, such as the SNARC effect (small numbers are associated with left space, larger numbers with right space). Using empirical evidence from behavioral research, I first describe sensory and motor biases induced by SNARC, thus identifying numbers as embodied concepts. Next, I propose a hierarchical relationship between grounded, embodied, and situated aspects of number knowledge. This hierarchical conceptualization helps to understand the variety of SNARC-related findings and yields testable predictions about numerical cognition. I report several such tests, ranging from cross-cultural comparisons of horizontal and vertical SNARC effects (Shaki and Fischer in J Exp Psychol Hum Percept Perform 38(3): 804-809, 2012) to motor cortical activation studies in adults with left- and right-hand counting preferences (Tschentscher et al. in NeuroImage 59: 3139-3148, 2012). It is concluded that the diagnostic features for each level of the proposed hierarchical knowledge representation, together with the spatial associations of numbers, make the domain of numerical knowledge an ideal testing ground for embodied cognition research.}, language = {en} } @article{ChengHartmannGuptaetal.2009, author = {Cheng, Fuxia and Hartmann, Stefanie and Gupta, Mayetri and Ibrahim, Joseph G. and Vision, Todd J.}, title = {A hierarchical model for incomplete alignments in phylogenetic inference}, issn = {1367-4803}, doi = {10.1093/bioinformatics/btp015}, year = {2009}, abstract = {Motivation: Full-length DNA and protein sequences that span the entire length of a gene are ideally used for multiple sequence alignments (MSAs) and the subsequent inference of their relationships. Frequently, however, MSAs contain a substantial amount of missing data. For example, expressed sequence tags (ESTs), which are partial sequences of expressed genes, are the predominant source of sequence data for many organisms. The patterns of missing data typical for EST-derived alignments greatly compromise the accuracy of estimated phylogenies. Results: We present a statistical method for inferring phylogenetic trees from EST-based incomplete MSA data. We propose a class of hierarchical models for modeling pairwise distances between the sequences, and develop a fully Bayesian approach for estimation of the model parameters. Once the distance matrix is estimated, the phylogenetic tree may be constructed by applying neighbor-joining (or any other algorithm of choice). We also show that maximizing the marginal likelihood from the Bayesian approach yields similar results to a pro. le likelihood estimation. The proposed methods are illustrated using simulated protein families, for which the true phylogeny is known, and one real protein family.}, language = {en} } @article{FischerWertherBouaklineetal.2020, author = {Fischer, Eric W. and Werther, Michael and Bouakline, Foudhil and Saalfrank, Peter}, title = {A hierarchical effective mode approach to phonon-driven multilevel vibrational relaxation dynamics at surfaces}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry}, volume = {153}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry}, number = {6}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/5.0017716}, pages = {15}, year = {2020}, abstract = {We discuss an efficient Hierarchical Effective Mode (HEM) representation of a high-dimensional harmonic oscillator bath, which describes phonon-driven vibrational relaxation of an adsorbate-surface system, namely, deuterium adsorbed on Si(100). Starting from the original Hamiltonian of the adsorbate-surface system, the HEM representation is constructed via iterative orthogonal transformations, which are efficiently implemented with Householder matrices. The detailed description of the HEM representation and its construction are given in the second quantization representation. The hierarchical nature of this representation allows access to the exact quantum dynamics of the adsorbate-surface system over finite time intervals, controllable via the truncation order of the hierarchy. To study the convergence properties of the effective mode representation, we solve the time-dependent Schrodinger equation of the truncated system-bath HEM Hamiltonian, with the help of the multilayer extension of the Multiconfigurational Time-Dependent Hartree (ML-MCTDH) method. The results of the HEM representation are compared with those obtained with a quantum-mechanical tier-model. The convergence of the HEM representation with respect to the truncation order of the hierarchy is discussed for different initial conditions of the adsorbate-surface system. The combination of the HEM representation with the ML-MCTDH method provides information on the time evolution of the system (adsorbate) and multiple effective modes of the bath (surface). This permits insight into mechanisms of vibration-phonon coupling of the adsorbate-surface system, as well as inter-mode couplings of the effective bath.}, language = {en} } @article{Strohe1998, author = {Strohe, Hans Gerhard}, title = {A heuristic partial-least-squares approach to estimating dynamic path models}, series = {Classification, Data Analysis, and Data Highways}, journal = {Classification, Data Analysis, and Data Highways}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {3-540-63909-8}, doi = {10.1007/978-3-642-72087-1}, year = {1998}, language = {en} } @article{KatterleHolzwarthJesorka2006, author = {Katterle, Martin and Holzwarth, Alfred R. and Jesorka, Aldo}, title = {A Heck-type coupling for the synthesis of novel bridged metallochlorin-fullerene C-60 dyads}, issn = {1434-193X}, doi = {10.1002/ejoc.200500494}, year = {2006}, abstract = {A short and convenient synthesis of metallochlorin-C-60 dyads based on a Heck-type hetero coupling at the 3(2) position of a chlorin is described. p-Bromobenzaldehyde was treated with Zn-metalated 13(2)- demethoxycarbonylmethylpheophorbide a, using a palladium acetate/LiCl catalyst mixture under phase-transfer conditions in DMF at 70 degrees C. The resulting asymmetric olefin was obtained in a high trans/cis ratio. The desired trans isomer was separated and subsequently transformed into a donor-acceptor dyad by a 1,3-dipolar cycloaddition to C-60 in the presence of sarcosine in refluxing toluene. The resulting dyads are expected to undergo efficient photoinduced electron transfer and can potentially be utilized in solar energy conversion devices.}, language = {en} } @article{AndersMefenzaBobdaetal.2016, author = {Anders, Jakob and Mefenza, Michael and Bobda, Christophe and Yonga, Franck and Aklah, Zeyad and Gunn, Kevin}, title = {A hardware/software prototyping system for driving assistance investigations}, series = {Journal of real-time image processing}, volume = {11}, journal = {Journal of real-time image processing}, publisher = {Springer}, address = {Heidelberg}, issn = {1861-8200}, doi = {10.1007/s11554-013-0351-4}, pages = {559 -- 569}, year = {2016}, abstract = {A holistic design and verification environment to investigate driving assistance systems is presented, with an emphasis on system-on-chip architectures for video applications. Starting with an executable specification of a driving assistance application, subsequent transformations are performed across different levels of abstraction until the final implementation is achieved. The hardware/software partitioning is facilitated through the integration of OpenCV and SystemC in the same design environment, as well as OpenCV and Linux in the run-time system. We built a rapid prototyping, FPGA-based camera system, which allows designs to be explored and evaluated in realistic conditions. Using lane departure and the corresponding performance speedup, we show that our platform reduces the design time, while improving the verification efforts.}, language = {en} } @article{FahleDietrichLischeid2013, author = {Fahle, Marcus and Dietrich, Ottfried and Lischeid, Gunnar}, title = {A guideline for developing an initial hydrological monotoring network as a basis for water management in artificially drained wetlands}, series = {Irrigation and drainage}, volume = {62}, journal = {Irrigation and drainage}, number = {4}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {1531-0353}, doi = {10.1002/ird.1744}, pages = {524 -- 536}, year = {2013}, abstract = {Reliable hydrological monitoring is the basis for sound water management in drained wetlands. Since statistical methods cannot be employed for unobserved or sparsely monitored areas, the primary design (first set-up) may be arbitrary in most instances. The objective of this paper is therefore to provide a guideline for designing the initial hydrological monitoring network. A scheme is developed that handles different parts of monitoring and hydrometry in wetlands, focusing on the positioning of surface water and groundwater gauges. For placement of the former, control units are used which correspond to areas whose water levels can be regulated separately. The latter are arranged depending on hydrological response units, defined by combinations of soil type and land use, and the chosen surface water monitoring sites. A practical application of the approach is shown for an investigation area in the Spreewald region in north-east Germany. The presented scheme leaves a certain degree of freedom to its user, allowing the inclusion of expert knowledge or special concerns. Based on easily obtainable data, the developed hydrological network serves as a first step in the iterative procedure of monitoring network optimisation. Copyright (c) 2013 John Wiley \& Sons, Ltd.}, language = {en} } @article{HartliebMansfieldPerrier2020, author = {Hartlieb, Matthias and Mansfield, Edward D. H. and Perrier, Sebastien}, title = {A guide to supramolecular polymerizations}, series = {Polymer Chemistry}, volume = {11}, journal = {Polymer Chemistry}, number = {6}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1759-9954}, doi = {10.1039/c9py01342c}, pages = {1083 -- 1110}, year = {2020}, abstract = {Supramolecular polymers or fibers are non-covalent assemblies of unimeric building blocks connected by secondary interactions such as hydrogen bonds or pi-pi interactions. Such structures hold enormous potential in the development of future materials, as their non-covalent nature makes them highly modular and adaptive. Within this review we aim to provide a broad overview over the area of linear supramolecular polymers including the different mechanisms of their polymerization as well as methods essential for their characterization. The different non-covalent interactions able to form supramolecular polymers are discussed, and key examples for each species are shown. Particular emphasis is laid on the development of living supramolecular polymerization able to produce fibers with a controlled length and low length dispersity, and even enable the production of supramolecular block copolymers. Another important and very recent field is the development of out-of-equilibrium supramolecular polymers, where the polymerization process can be temporally controlled enabling access to highly adaptive materials.}, language = {en} } @article{ArvidssonPerezRodriguezMuellerRoeber2011, author = {Arvidsson, Samuel Janne and Perez-Rodriguez, Paulino and M{\"u}ller-R{\"o}ber, Bernd}, title = {A growth phenotyping pipeline for Arabidopsis thaliana integrating image analysis and rosette area modeling for robust quantification of genotype effects}, series = {New phytologist : international journal of plant science}, volume = {191}, journal = {New phytologist : international journal of plant science}, number = {3}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0028-646X}, doi = {10.1111/j.1469-8137.2011.03756.x}, pages = {895 -- 907}, year = {2011}, abstract = {To gain a deeper understanding of the mechanisms behind biomass accumulation, it is important to study plant growth behavior. Manually phenotyping large sets of plants requires important human resources and expertise and is typically not feasible for detection of weak growth phenotypes. Here, we established an automated growth phenotyping pipeline for Arabidopsis thaliana to aid researchers in comparing growth behaviors of different genotypes. The analysis pipeline includes automated image analysis of two-dimensional digital plant images and evaluation of manually annotated information of growth stages. It employs linear mixed-effects models to quantify genotype effects on total rosette area and relative leaf growth rate (RLGR) and ANOVAs to quantify effects on developmental times. Using the system, a single researcher can phenotype up to 7000 plants d(-1). Technical variance is very low (typically < 2\%). We show quantitative results for the growth-impaired starch-excessmutant sex4-3 and the growth-enhancedmutant grf9. We show that recordings of environmental and developmental variables reduce noise levels in the phenotyping datasets significantly and that careful examination of predictor variables (such as d after sowing or germination) is crucial to avoid exaggerations of recorded phenotypes and thus biased conclusions.}, language = {en} } @article{KraheKnappert2009, author = {Krah{\´e}, Barbara and Knappert, Lena}, title = {A group-randomized evaluation of a theatre-based sexual abuse prevention programme for primary school children in Germany}, issn = {1052-9284}, doi = {10.1002/Casp.1009}, year = {2009}, abstract = {The study reports a group-randomized trial of a theatre-based intervention to prevent sexual abuse targeting first and second grade primary school children in Germany. A sample of 148 first and second graders saw a live performance of a play designed to promote skills in dealing with abuse-prone interactions with adults, watched a recording of the play on DVD or were assigned to a no intervention control group. Both the live performance and the DVD groups showed significant increases in the target variables (distinguishing good/bad touch and secrets, getting help, rejecting unwanted touch) from baseline to post-intervention and a follow-up after 2 weeks, while the control group did not show changes. The live performance and DVD groups participated in a further follow-up 30 weeks post-intervention, which showed sustained effects of the intervention. The findings indicate that with appropriately culture-sensitive measures, Sexual abuse prevention programmes can have Sustainable effects with young primary school children.}, language = {en} } @article{WeatherillCotton2020, author = {Weatherill, Graeme and Cotton, Fabrice}, title = {A ground motion logic tree for seismic hazard analysis in the stable cratonic region of Europe}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {18}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {14}, publisher = {Springer Science + Business Media B.V.}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-020-00940-x}, pages = {6119 -- 6148}, year = {2020}, abstract = {Regions of low seismicity present a particular challenge for probabilistic seismic hazard analysis when identifying suitable ground motion models (GMMs) and quantifying their epistemic uncertainty. The 2020 European Seismic Hazard Model adopts a scaled backbone approach to characterise this uncertainty for shallow seismicity in Europe, incorporating region-to-region source and attenuation variability based on European strong motion data. This approach, however, may not be suited to stable cratonic region of northeastern Europe (encompassing Finland, Sweden and the Baltic countries), where exploration of various global geophysical datasets reveals that its crustal properties are distinctly different from the rest of Europe, and are instead more closely represented by those of the Central and Eastern United States. Building upon the suite of models developed by the recent NGA East project, we construct a new scaled backbone ground motion model and calibrate its corresponding epistemic uncertainties. The resulting logic tree is shown to provide comparable hazard outcomes to the epistemic uncertainty modelling strategy adopted for the Eastern United States, despite the different approaches taken. Comparison with previous GMM selections for northeastern Europe, however, highlights key differences in short period accelerations resulting from new assumptions regarding the characteristics of the reference rock and its influence on site amplification.}, language = {en} } @article{KhareRubySonkaria2012, author = {Khare, Varsha and Ruby, Christian and Sonkaria, Sanjiv}, title = {A green and sustainable nanotechnology role of ionic liquids}, series = {International journal of precision engineering and manufacturing}, volume = {13}, journal = {International journal of precision engineering and manufacturing}, number = {7}, publisher = {Korean Society of Precision Engineering}, address = {Seoul}, issn = {2234-7593}, doi = {10.1007/s12541-012-0160-x}, pages = {1207 -- 1213}, year = {2012}, abstract = {In the present study, the effects of ionic liquids (ILs) on the stability of nanoparticles in several IL compositions were investigated. In this context, we examined the primary role of ILs in the synthesis of metal/metal oxide nanoparticles and their dispersions extensively. However, the focus of the discussion in this communication centers mainly on the effect of EMIM Ethyl Sulfate on growth and stability of nanoparticles. The dispersion properties of ILs based on their ability to aid the synthesis of uniformly dispersed nanoparticles have been further explored to produce nanoparticles of an effective catalyst useful in water purification, soil remediation and battery applications. Two independent protocols were developed for the synthesis of nanoparticles, namely (a) one pot process via chemical reduction (b) dispersion of the inorganic material in ILs. The protocols are simple, sustainable and environmentally friendly because the processes are conducted in ILs as harmless non-toxic green solvent materials. The catalysts were analyzed by x-ray diffraction, electron microscopy, UV visible spectroscopy and dynamic light scattering as the main methodologies.}, language = {en} } @article{ReegHeineMihanetal.2020, author = {Reeg, Jette and Heine, Simon and Mihan, Christine and McGee, Sean and Preuss, Thomas G. and Jeltsch, Florian}, title = {A graphical user interface for the plant community model IBC-grass}, series = {Plos One}, volume = {15}, journal = {Plos One}, number = {3}, publisher = {Plos 1}, address = {San Francisco}, issn = {1932-6203}, doi = {10.1371/journal.pone.0230012}, pages = {18}, year = {2020}, abstract = {Plants located adjacent to agricultural fields are important for maintaining biodiversity in semi-natural landscapes. To avoid undesired impacts on these plants due to herbicide application on the arable fields, regulatory risk assessments are conducted prior to registration to ensure proposed uses of plant protection products do not present an unacceptable risk. The current risk assessment approach for these non-target terrestrial plants (NTTPs) examines impacts at the individual-level as a surrogate approach for protecting the plant community due to the inherent difficulties of directly assessing population or community level impacts. However, modelling approaches are suitable higher tier tools to upscale individual-level effects to community level. IBC-grass is a sophisticated plant community model, which has already been applied in several studies. However, as it is a console application software, it was not deemed sufficiently user-friendly for risk managers and assessors to be conveniently operated without prior expertise in ecological models. Here, we present a user-friendly and open source graphical user interface (GUI) for the application of IBC-grass in regulatory herbicide risk assessment. It facilitates the use of the plant community model for predicting long-term impacts of herbicide applications on NTTP communities. The GUI offers two options to integrate herbicide impacts: (1) dose responses based on current standard experiments (acc. to testing guidelines) and (2) based on specific effect intensities. Both options represent suitable higher tier options for future risk assessments of NTTPs as well as for research on the ecological relevance of effects.}, language = {en} } @article{GerstenbergSkupienDekens2021, author = {Gerstenberg, Annette and Skupien-Dekens, Carine}, title = {A grammar of authority?}, series = {Journal of historical pragmatics}, volume = {22}, journal = {Journal of historical pragmatics}, number = {1}, publisher = {John Benjamins Publishing Co.}, address = {Amsterdam}, issn = {1566-5852}, doi = {10.1075/jhp.17006.ger}, pages = {1 -- 33}, year = {2021}, abstract = {Directive Speech Acts (dsas) are a major feature of historical pragmatics, specifically in research on historical (im)politeness. However, for Classical French, there is a lack of research on related phenomena. In our contribution, we present two recently constructed corpora covering the period of Classical French, sermo and apwcf. We present these corpora in terms of their genre characteristics on a communicative-functional and socio-pragmatic level. Based on the observation that, both in sermo and apwcf, dsas frequently occur together with terms of address, we analyse and manually code a sample based on this co-occurrence, and we compare the results with regard to special features in the individual corpora. The emerging patterns show a clear correspondence between socio-pragmatic factors and the linguistic means used to realise dsas. We propose that these results can be interpreted as signs of an underlying "grammar of authority".}, language = {en} } @article{AngerKonczakLinkeetal.2005, author = {Anger, Christian and Konczak, Kathrin and Linke, Thomas and Schaub, Torsten}, title = {A Glimpse of Answer Set Programming}, issn = {0170-4516}, year = {2005}, language = {en} } @article{WulfRujner2011, author = {Wulf, Monika and Rujner, Hendrik}, title = {A GIS-based method for the reconstruction of the late eighteenth century forest vegetation in the Prignitz region (NE Germany)}, series = {Landscape ecology}, volume = {26}, journal = {Landscape ecology}, number = {2}, publisher = {Springer}, address = {Dordrecht}, issn = {0921-2973}, doi = {10.1007/s10980-010-9555-1}, pages = {153 -- 168}, year = {2011}, abstract = {Our goal was to reconstruct the late eighteenth century forest vegetation of the Prignitz region (NE Germany) at a scale of 1:50,000. We also wanted to relate the historical forest vegetation to the actual and potential natural vegetation. For these purposes, we selected 15 woody species and transferred relevant data found in historical records from various sources together with the recent localities of (very) old individuals belonging to these woody species into ArcView GIS. Following multi-step data processing including the generation of a point density layer using a moving window with kernel estimation and derivation of vegetation units applying Boolean algebra rules together with information on site conditions, we derived 17 forest communities corresponding to the potential natural vegetation. We were able to reconstruct the historical forest vegetation for 90\% of the forest area ca. 1780. Only two of the 17 forest communities covered large parts of the forested area. The oak forest with Agrostis capillaris covered about 44\% of the total forest area, and alder forests on fenland made up about 37\%. Oak-hornbeam forests with Stellaria holostea comprised slightly less than 6\% of the forest area, while all other forest communities comprised less than 1\%. The historical forest vegetation is more similar to the potential forest vegetation and quite different from the actual forest vegetation because coniferous tree species currently cover approximately two-thirds of the actual forest area. The most beneficial result of this study is the map of high-resolution historical vegetation units that may serve as the basis for various further studies, e.g., modelling long-term changes in biodiversity at the landscape scale.}, language = {en} } @article{Zass2020, author = {Zass, Alexander}, title = {A Gibbs point process of diffusions: Existence and uniqueness}, series = {Lectures in pure and applied mathematics}, journal = {Lectures in pure and applied mathematics}, number = {6}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-485-2}, issn = {2199-4951}, doi = {10.25932/publishup-47195}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471951}, pages = {13 -- 22}, year = {2020}, language = {en} } @article{ShojaeiFard2013, author = {Shojaei-Fard, Ali}, title = {A GEOMETRIC PERSPECTIVE ON COUNTERTERMS RELATED TO DYSON-SCHWINGER EQUATIONS}, series = {INTERNATIONAL JOURNAL OF MODERN PHYSICS A}, volume = {28}, journal = {INTERNATIONAL JOURNAL OF MODERN PHYSICS A}, number = {32}, publisher = {WORLD SCIENTIFIC PUBL CO PTE LTD}, address = {SINGAPORE}, issn = {0217-751X}, doi = {10.1142/S0217751X13501704}, pages = {15}, year = {2013}, abstract = {We study Dyson-Schwinger equations (DSEs) in terms of some groups of diffeographisms to provide a new geometric formulation for their corresponding counterterms on the basis of systems of ordinary differential equations.}, language = {en} }