@article{GlerumBruneStampsetal.2020, author = {Glerum, Anne and Brune, Sascha and Stamps, D. Sarah and Strecker, Manfred}, title = {Victoria continental microplate dynamics controlled by the lithospheric strength distribution of the East African Rift}, series = {Nature Communications}, volume = {11}, journal = {Nature Communications}, number = {1}, publisher = {Nature Publishing Group}, address = {London}, issn = {2041-1723}, doi = {10.1038/s41467-020-16176-x}, pages = {15}, year = {2020}, abstract = {The Victoria microplate between the Eastern and Western Branches of the East African Rift System is one of the largest continental microplates on Earth. In striking contrast to its neighboring plates, Victoria rotates counterclockwise with respect to Nubia. The underlying cause of this distinctive rotation has remained elusive so far. Using 3D numerical models, we investigate the role of pre-existing lithospheric heterogeneities in continental microplate rotation. We find that Victoria's rotation is primarily controlled by the distribution of rheologically stronger zones that transmit the drag of the major plates to the microplate and of the mechanically weaker mobile belts surrounding Victoria that facilitate rotation. Our models reproduce Victoria's GPS-derived counterclockwise rotation as well as key complexities of the regional tectonic stress field. These results reconcile competing ideas on the opening of the rift system by highlighting differences in orientation of the far-field divergence, local extension, and the minimum horizontal stress. One of the largest continental microplates on Earth is situated in the center of the East African Rift System, and oddly, the Victoria microplate rotates counterclockwise with respect to the neighboring African tectonic plate. Here, the authors' modelling results suggest that Victoria microplate rotation is caused by edge-driven lithospheric processes related to the specific geometry of rheologically weak and strong regions.}, language = {en} } @article{GholamrezaieScheckWenderothSippeletal.2018, author = {Gholamrezaie, Ershad and Scheck-Wenderoth, Magdalena and Sippel, Judith and Strecker, Manfred}, title = {Variability of the geothermal gradient across two differently aged magma-rich continental rifted margins of the Atlantic Ocean}, series = {Solid Earth}, volume = {9}, journal = {Solid Earth}, number = {1}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9529}, doi = {10.5194/se-9-139-2018}, pages = {139 -- 158}, year = {2018}, abstract = {Abstract. The aim of this study is to investigate the shallow thermal field differences for two differently aged passive continental margins by analyzing regional variations in geothermal gradient and exploring the controlling factors for these variations. Hence, we analyzed two previously published 3-D conductive and lithospheric-scale thermal models of the Southwest African and the Norwegian passive margins. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data such as seismic observations and the gravity field. We extracted the temperature-depth distributions in 1 km intervals down to 6 km below the upper thermal boundary condition. The geothermal gradient was then calculated for these intervals between the upper thermal boundary condition and the respective depth levels (1, 2, 3, 4, 5, and 6 km below the upper thermal boundary condition). According to our results, the geothermal gradient decreases with increasing depth and shows varying lateral trends and values for these two different margins. We compare the 3-D geological structural models and the geothermal gradient variations for both thermal models and show how radiogenic heat production, sediment insulating effect, and thermal lithosphere-asthenosphere boundary (LAB) depth influence the shallow thermal field pattern. The results indicate an ongoing process of oceanic mantle cooling at the young Norwegian margin compared with the old SW African passive margin that seems to be thermally equilibrated in the present day.}, language = {en} } @article{BookhagenEchtlerMelnicketal.2006, author = {Bookhagen, Bodo and Echtler, Helmut Peter and Melnick, Daniel and Strecker, Manfred and Spencer, Joel Q. G.}, title = {Using uplifted Holocene beach berms for paleoseismic analysis on the Santa Maria Island, south-central Chile}, issn = {0094-8276}, doi = {10.1029/2006gl026734}, year = {2006}, abstract = {Major earthquakes ( M > 8) have repeatedly ruptured the Nazca-South America plate interface of south-central Chile involving meter scale land-level changes. Earthquake recurrence intervals, however, extending beyond limited historical records are virtually unknown, but would provide crucial data on the tectonic behavior of forearcs. We analyzed the spatiotemporal pattern of Holocene earthquakes on Santa Maria Island (SMI; 37 degrees S), located 20 km off the Chilean coast and approximately 70 km east of the trench. SMI hosts a minimum of 21 uplifted beach berms, of which a subset were dated to calculate a mean uplift rate of 2.3 +/- 0.2 m/ky and a tilting rate of 0.022 +/- 0.002 degrees/ky. The inferred recurrence interval of strandline-forming earthquakes is similar to 180 years. Combining coseismic uplift and aseismic subsidence during an earthquake cycle, the net gain in strandline elevation in this environment is similar to 0.4 m per event}, language = {en} } @article{UbaKleyStreckeretal.2009, author = {Uba, Cornelius Eji and Kley, Jonas and Strecker, Manfred and Schmitt, Axel K.}, title = {Unsteady evolution of the Bolivian Subandean thrust belt : the role of enhanced erosion and clastic wedge progradation}, issn = {0012-821X}, doi = {10.1016/j.epsl.2009.02.010}, year = {2009}, abstract = {The Subandean fold and thrust belt of Bolivia constitutes the easternmost part of the Andean orogen that reflects thin-skinned shortening and eastward propagation of the Andean deformation front. The exact interplay of tectonics, climate, and erosion in the deposition of up to 7.5 km of late Cenozoic strata exposed in the Subandes remains unclear. To better constrain these relationships, we use four W-E industry seismic reflection profiles, eight new zircon U-Pb ages from Mio-Pliocene sedimentary strata, and cross-section balancing to evaluate the rates of thrust propagation, shortening, and deposition pinch-out migration. Eastward thrusting arrived in the Subandean belt at similar to 12.4 +/- 0.5 Ma and propagated rapidly toward the foreland unit approximately 6 Ma. This was followed by out-of- sequence deformation from ca. 4 to 2.1 Ma and by renewed eastward propagation thereafter. Our results show that the thrust-front propagation- and deposition pinch-out migration rates mimic the sediment accumulation rate. The rates of deposition pinchout migration and thrust propagation increased three- and two fold, respectively (8 mm/a; 3.3 mm/a) at 86 Ma. The three-fold increase in deposition pinch-out migration rate at this time is an indication of enhanced erosional efficiency in the hinterland, probably coupled with flexural rebound of the basin. Following the pulse of pinch-out migration, the Subandean belt witnessed rapid similar to 80 km eastward propagation of thrusting to the La Vertiente structure at 6 Ma. As there is no evidence for this event of thrust front migration being linked to an increase in shortening rate, the enhanced frontal accretion suggests a shift to supercritical wedge taper conditions. We propose that the supercritical state was due to a drop in basal strength, caused by sediment loading and pore fluid overpressure. This scenario implies that climate-controlled variation in erosional efficiency was the driver of late Miocene mass redistribution, which induced flexural rebound of the Subandean thrust belt, spreading of a large clastic wedge across the basin, and subsequent thrust-front propagation.}, language = {en} } @article{OlenBookhagenHoffmannetal.2015, author = {Olen, Stephanie M. and Bookhagen, Bodo and Hoffmann, Bernd and Sachse, Dirk and Adhikari, Danda P. and Strecker, Manfred}, title = {Understanding erosion rates in the Himalayan orogen: A case study from the Arun Valley}, series = {Journal of geophysical research : Earth surface}, volume = {120}, journal = {Journal of geophysical research : Earth surface}, number = {10}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9003}, doi = {10.1002/2014JF003410}, pages = {2080 -- 2102}, year = {2015}, abstract = {Understanding the rates and pattern of erosion is a key aspect of deciphering the impacts of climate and tectonics on landscape evolution. Denudation rates derived from terrestrial cosmogenic nuclides (TCNs) are commonly used to quantify erosion and bridge tectonic (Myr) and climatic (up to several kiloyears) time scales. However, how the processes of erosion in active orogens are ultimately reflected in Be-10 TCN samples remains a topic of discussion. We investigate this problem in the Arun Valley of eastern Nepal with 34 new Be-10-derived catchment-mean denudation rates. The Arun Valley is characterized by steep north-south gradients in topography and climate. Locally, denudation rates increase northward, from <0.2mmyr(-1) to similar to 1.5mmyr(-1) in tributary samples, while main stem samples appear to increase downstream from similar to 0.2mmyr(-1) at the border with Tibet to 0.91mmyr(-1) in the foreland. Denudation rates most strongly correlate with normalized channel steepness (R-2=0.67), which has been commonly interpreted to indicate tectonic activity. Significant downstream decrease of Be-10 concentration in the main stem Arun suggests that upstream sediment grains are fining to the point that they are operationally excluded from the processed sample. This results in Be-10 concentrations and denudation rates that do not uniformly represent the upstream catchment area. We observe strong impacts on Be-10 concentrations from local, nonfluvial geomorphic processes, such as glaciation and landsliding coinciding with areas of peak rainfall rates, pointing toward climatic modulation of predominantly tectonically driven denudation rates.}, language = {en} } @article{MugishaEbingerStreckeretal.1997, author = {Mugisha, F. and Ebinger, C. and Strecker, Manfred and Pope, D.}, title = {Two-stage rifting in the Kenya Rift : implications for half-graben models}, year = {1997}, language = {en} } @article{HokeGarzioneAraneoetal.2009, author = {Hoke, Gregory D. and Garzione, Carmala N. and Araneo, Diego C. and Latorre, Claudio and Strecker, Manfred and Williams, Kendra J.}, title = {The stable isotope altimeter : do quaternary pedogenic carbonates predict modern elevations?}, issn = {0091-7613}, doi = {10.1130/G30308a.1}, year = {2009}, abstract = {Stable isotope altimetry is a useful tool for estimating paleoelevation in sedimentary records. Yet questions remain regarding how source moisture, climate, and local topography can influence these estimates. Here we present stable isotope altimetry results on late Quaternary pedogenic carbonates of known elevation on both flanks of the Andean orogen at 33 degrees S. We measured delta O-18 values of pedogenic carbonates and river water samples from small drainages at regular elevation increments within the Rio Aconcagua (Chile) and Rio Mendoza (Argentina) catchments. The delta O-18 values of river waters correlate well with elevation and show similar isotopic gradients between the Chilean (-3.7 parts per thousand/km) and Argentine (-4.8 parts per thousand/km) sides of the range. Uncertainties associated with scatter in the river water data and assumptions about the temperature of carbonate formation indicate that elevation estimates have 1 sigma errors of 350-450 m. We estimate the isotopic composition of soil water from pedogenic carbonates on both sides of the range by assuming mean annual temperatures based the modern temperature lapse rate from meteorological station data. Combined, our data show that stable isotope altimetry produces reasonable estimates of modern elevation, with the majority of our samples (60\%) within the 1 sigma uncertainties and 77\% within 2 sigma.}, language = {en} } @article{MoraGaonaKleyetal.2009, author = {Mora, Andr{\´e}s and Gaona, Tatiana and Kley, Jonas and Montoya, Diana and Parra, Mauricio and Quiroz, Luis Ignacio and Reyes, German and Strecker, Manfred}, title = {The role of inherited extensional fault segmentation and linkage in contractional orogenesis : a reconstruction of Lower Cretaceous inverted rift basins in the Eastern Cordillera of Colombia}, issn = {0950-091X}, doi = {10.1111/j.1365-2117.2008.00367.x}, year = {2009}, abstract = {Lower Cretaceous early syn-rift facies along the eastern flank of the Eastern Cordillera of Colombia, their provenance, and structural context, reveal the complex interactions between Cretaceous extension, spatio-temporal trends in associated sedimentation, and subsequent inversion of the Cretaceous Guatiquia paleo-rift. South of 4 degrees 30'N lat, early syn-rift alluvial sequences in former extensional footwall areas were contemporaneous with fan- delta deposits in shallow marine environments in adjacent hanging-wall areas. In general, footwall erosion was more pronounced in the southern part of the paleorift. In contrast, early syn-rift sequences in former footwall areas in the northern rift sectors mainly comprise shallow marine supratidal sabkha to intertidal strata, whereas hanging-wall units display rapid transitions to open-sea shales. In comparison with the southern paleo-rift sector, fan-delta deposits in the north are scarce, and provenance suggests negligible footwall erosion. The southern graben segment had longer, and less numerous normal faults, whereas the northern graben segment was characterized by shorter, rectilinear faults. To the east, the graben system was bounded by major basin-margin faults with protracted activity and greater throw as compared with intrabasinal faults to the west. Intrabasinal structures grew through segment linkage and probably interacted kinematically with basin-margin faults. Basin-margin faults constitute a coherent fault system that was conditioned by pre-existing basement fabrics. Structural mapping, analysis of present-day topography, and balanced cross sections indicate that positive inversion of extensional structures was focused along basin-bounding faults, whereas intrabasinal faults remained unaffected and were passively transported by motion along the basin-bounding faults. Thus, zones of maximum subsidence in extension accommodated maximum elevation in contraction, and former topographic highs remained as elevated areas. This documents the role of basin-bounding faults as multiphased, long-lived features conditioned by basement discontinuities. Inversion of basin-bounding faults was more efficient in the southern than in the northern graben segment, possibly documenting the inheritance and pivotal role of fault-displacement gradients. Our observations highlight similarities between inversion features in orogenic belts and intra-plate basins, emphasizing the importance of the observed phenomena as predictive tools in the spatiotemporal analysis of inversion histories in orogens, as well as in hydrocarbon and mineral deposits exploration.}, language = {en} } @article{HintersbergerThiedeStrecker2011, author = {Hintersberger, Esther and Thiede, Rasmus Christoph and Strecker, Manfred}, title = {The role of extension during brittle deformation within the NW Indian Himalaya}, series = {Tectonics}, volume = {30}, journal = {Tectonics}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1029/2010TC002822}, pages = {16}, year = {2011}, abstract = {Synorogenic extension has been recognized as an integral structural constituent of mountain belts and high-elevation plateaus during their evolution. In the Himalaya, both orogen-parallel and orogen-normal extension has been recognized. However, the underlying driving forces for extension and their timing are still a matter of debate. Here we present new fault kinematic data based on systematic measurements of hundreds of outcrop-scale brittle fault planes in the NW Indian Himalaya. This new data set, as well as field observations including crosscutting relationships, mineral fibers on fault planes, and correlations with deformation structures in lake sediments, allows us to distinguish different deformation styles. The overall strain pattern derived from our data reflects the large regional contractional deformation pattern very well but also reveals significant extensional deformation in a region, which is dominated by shortening. In total, we were able to identify six deformation styles, most of which are temporally and spatially linked, representing protracted shortening. Our observations also furnish the basis for a detailed overview of the younger deformation history in the NW Himalaya, which has been characterized by extension overprinting previously generated structures related to shortening. The four dominant deformation styles are (1) shortening parallel to the regional convergence direction; (2) arc-normal extension; (3) arc-parallel extension; and finally, (4) E-W extension. This is the first data set where a succession of both arc-normal and E-W extension has been documented in the Himalaya. Importantly, our observations help differentiate E-W extension triggered by processes within the Tibetan Plateau from arc-parallel and arc-normal extension originating from the curvature of the Himalayan orogen.}, language = {en} } @article{SippelMeessenCacaceetal.2017, author = {Sippel, Judith and Meessen, Christian and Cacace, Mauro and Mechie, James and Fishwick, Stewart and Heine, Christian and Scheck-Wenderoth, Magdalena and Strecker, Manfred}, title = {The Kenya rift revisited}, series = {Solid earth}, volume = {8}, journal = {Solid earth}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-8-45-2017}, pages = {45 -- 81}, year = {2017}, abstract = {We present three-dimensional (3-D) models that describe the present-day thermal and rheological state of the lithosphere of the greater Kenya rift region aiming at a better understanding of the rift evolution, with a particular focus on plume-lithosphere interactions. The key methodology applied is the 3-D integration of diverse geological and geophysical observations using gravity modelling. Accordingly, the resulting lithospheric-scale 3-D density model is consistent with (i) reviewed descriptions of lithological variations in the sedimentary and volcanic cover, (ii) known trends in crust and mantle seismic velocities as revealed by seismic and seismological data and (iii) the observed gravity field. This data-based model is the first to image a 3-D density configuration of the crystalline crust for the entire region of Kenya and northern Tanzania. An upper and a basal crustal layer are differentiated, each composed of several domains of different average densities. We interpret these domains to trace back to the Precambrian terrane amalgamation associated with the East African Orogeny and to magmatic processes during Mesozoic and Cenozoic rifting phases. In combination with seismic velocities, the densities of these crustal domains indicate compositional differences. The derived lithological trends have been used to parameterise steady-state thermal and rheological models. These models indicate that crustal and mantle temperatures decrease from the Kenya rift in the west to eastern Kenya, while the integrated strength of the lithosphere increases. Thereby, the detailed strength configuration appears strongly controlled by the complex inherited crustal structure, which may have been decisive for the onset, localisation and propagation of rifting.}, language = {en} } @article{BallatoLandgrafSchildgenetal.2015, author = {Ballato, Paolo and Landgraf, Angela and Schildgen, Taylor F. and Stockli, Daniel F. and Fox, Matthew and Ghassemi, Mohammad R. and Kirby, Eric and Strecker, Manfred}, title = {The growth of a mountain belt forced by base-level fall: Tectonics and surface processes during the evolution of the Alborz Mountains, N Iran}, series = {Earth \& planetary science letters}, volume = {425}, journal = {Earth \& planetary science letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-821X}, doi = {10.1016/j.epsl.2015.05.051}, pages = {204 -- 218}, year = {2015}, abstract = {The idea that climatically modulated erosion may impact orogenic processes has challenged geoscientists for decades. Although modeling studies and physical calculations have provided a solid theoretical basis supporting this interaction, to date, field-based work has produced inconclusive results. The central-western Alborz Mountains in the northern sectors of the Arabia-Eurasia collision zone constitute a promising area to explore these potential feedbacks. This region is characterized by asymmetric precipitation superimposed on an orogen with a history of spatiotemporal changes in exhumation rates, deformation patterns, and prolonged, km-scale base-level changes. Our analysis suggests that despite the existence of a strong climatic gradient at least since 17.5 Ma, the early orogenic evolution (from similar to 36 to 9-6 Ma) was characterized by decoupled orographic precipitation and tectonics. In particular, faster exhumation and sedimentation along the more arid southern orogenic flank point to a north-directed accretionary flux and underthrusting of Central Iran. Conversely, from 6 to 3 Ma, erosion rates along the northern orogenic flank became higher than those in the south, where they dropped to minimum values. This change occurred during a similar to 3-Myr-long, km-scale base-level lowering event in the Caspian Sea. We speculate that mass redistribution processes along the northern flank of the Alborz and presumably across all mountain belts adjacent to the South Caspian Basin and more stable areas of the Eurasian plate increased the sediment load in the basin and ultimately led to the underthrusting of the Caspian Basin beneath the Alborz Mountains. This underthrusting in turn triggered a new phase of northward orogenic expansion, transformed the wetter northern flank into a new pro-wedge, and led to the establishment of apparent steady-state conditions along the northern orogenic flank (i.e., rock uplift equal to erosion rates). Conversely, the southern mountain front became the retro-wedge and experienced limited tectonic activity. These observations overall raise the possibility that mass-distribution processes during a pronounced erosion phase driven by base-level changes may have contributed to the inferred regional plate-tectonic reorganization of the northern Arabia-Eurasia collision during the last similar to 5 Ma. (C) 2015 Elsevier B.V. All rights reserved.}, language = {en} } @article{BackDeBatistStrecker1998, author = {Back, Stefan and De Batist, Marc and Strecker, Manfred}, title = {The Frolikha Fan : a large Pleistocene glaciolacustrine outwash fan in northern Lake Baikal, Siberia}, year = {1998}, language = {en} } @article{JaraMunozMelnickLietal.2022, author = {Jara Mu{\~n}oz, Julius and Melnick, Daniel and Li, Shaoyang and Socquet, Anne and Cort{\´e}s-Aranda, Joaqu{\´i}n and Brill, Dominik and Strecker, Manfred}, title = {The cryptic seismic potential of the Pichilemu blind fault in Chile revealed by off-fault geomorphology}, series = {Nature Communications}, volume = {13}, journal = {Nature Communications}, publisher = {Springer Nature}, address = {London}, issn = {2041-1723}, doi = {10.1038/s41467-022-30754-1}, pages = {13}, year = {2022}, abstract = {The first step towards assessing hazards in seismically active regions involves mapping capable faults and estimating their recurrence times. While the mapping of active faults is commonly based on distinct geologic and geomorphic features evident at the surface, mapping blind seismogenic faults is complicated by the absence of on-fault diagnostic features. Here we investigated the Pichilemu Fault in coastal Chile, unknown until it generated a Mw 7.0 earthquake in 2010. The lack of evident surface faulting suggests activity along a partly-hidden blind fault. We used off-fault deformed marine terraces to estimate a fault-slip rate of 0.52 ± 0.04 m/ka, which, when integrated with satellite geodesy suggests a 2.12 ± 0.2 ka recurrence time for Mw~7.0 normal-faulting earthquakes. We propose that extension in the Pichilemu region is associated with stress changes during megathrust earthquakes and accommodated by sporadic slip during upper-plate earthquakes, which has implications for assessing the seismic potential of cryptic faults along convergent margins and elsewhere.}, language = {en} } @article{JaraMunozMelnickStrecker2016, author = {Jara Mu{\~n}oz, Julius and Melnick, Daniel and Strecker, Manfred}, title = {TerraceM: A MATLAB (R) tool to analyze marine and lacustrine terraces using high-resolution topography}, series = {Geosphere}, volume = {12}, journal = {Geosphere}, publisher = {American Institute of Physics}, address = {Boulder}, issn = {1553-040X}, doi = {10.1130/GES01208.1}, pages = {176 -- 195}, year = {2016}, abstract = {High-resolution topographic data greatly facilitate the remote identification of geomorphic features, furnishing valuable information concerning surface processes and characterization of reference markers for quantifying tectonic deformation. Marine terraces have been used as long baseline geodetic markers of relative past sea-level positions, reflecting the interplay between vertical crustal movements and sea-level oscillations. Uplift rates may be determined from the terrace age and the elevation of its shoreline angle, a geomorphic feature that can be correlated with past sea-levels positions. A precise definition of the shoreline angle in time and space is essential to obtain reliable uplift rates with coherent spatial correlation. To improve our ability to rapidly assess and map shoreline angles at regional and local scales, we have developed TerraceM, a MATLAB (R) graphical user interface that allows the shoreline angle and its associated error to be estimated using high-resolution topography. TerraceM uses topographic swath profiles oriented orthogonally to the terrace riser. Four functions are included to analyze the swath profiles and extract the shoreline angle, from both staircase sequences of multiple terraces and rough coasts characterized by eroded remnants of emerged terrace surfaces. The former are measured by outlining the paleocliffs and paieo-platforms and finding their intersection by extrapolating linear regressions, whereas the latter are assessed by automatically detecting peaks of sea-stack tops and back-projecting them to the modern sea cliff. In the absence of rigorous absolute age determinations of marine terraces, their geomorphic age may be estimated using previously published diffusion models. Postprocessing functions are included to obtain first-order statistics of shoreline-angle elevations and their spatial distribution. TerraceM has the ability to process series of profiles from several sites in an efficient and structured workflow. Results may be exported in Google Earth and ESRI shapefile formats. The precision and accuracy of the method have been estimated from a case study at Santa Cruz, California, by comparing TerraceM results with published field measurements. The repeatability was evaluated using multiple measurements made by inexperienced users. TerraceM will improve the efficiency and precision of estimating shoreline-angle elevations in wave-cut terraces in both marine and lacustrine environments.}, language = {en} } @article{JaraMunozMelnickPedojaetal.2019, author = {Jara Mu{\~n}oz, Julius and Melnick, Daniel and Pedoja, Kevin and Strecker, Manfred}, title = {TerraceM-2: A MatlabR (R) Interface for Mapping and Modeling Marine and Lacustrine Terraces}, series = {Frontiers in Earth Science}, volume = {7}, journal = {Frontiers in Earth Science}, publisher = {Frontiers Research Foundation}, address = {Lausanne}, issn = {2296-6463}, doi = {10.3389/feart.2019.00255}, pages = {18}, year = {2019}, abstract = {The morphology of marine and lacustrine terraces has been largely used to measure past sea- and lake-level positions and estimate vertical deformation in a wealth of studies focused on climate and tectonic processes. To obtain accurate morphometric assessments of terrace morphology we present TerraceM-2, an improved version of our MatlabR (R) graphic-user interface that provides new methodologies for morphometric analyses as well as landscape evolution and fault-dislocation modeling. The new version includes novel routines to map the elevation and spatial distribution of terraces, to model their formation and evolution, and to estimate fault-slip rates from terrace deformation patterns. TerraceM-2 has significantly improves its processing speed and mapping capabilities, and includes separate functions for developing customized workflows beyond the graphic-user interface. We illustrate these new mapping and modeling capabilities with three examples: mapping lacustrine shorelines in the Dead Sea to estimate deformation across the Dead Sea Fault, landscape evolution modeling to estimate a history of uplift rates in southern Peru, and dislocation modeling of deformed marine terraces in California. These examples also illustrate the need to use topographic data of different resolutions. The new modeling and mapping routines of TerraceM-2 highlight the advantages of an integrated joint mapping and modeling approach to improve the efficiency and precision of coastal terrace metrics in both marine and lacustrine environments.}, language = {en} } @article{HermannsTrauthMcWilliamsetal.2000, author = {Hermanns, Reginald L. and Trauth, Martin H. and McWilliams, Michael O. and Strecker, Manfred}, title = {Tephrochronologic Constraints on temporal Distribution of large Landslides in NW-Argentina}, year = {2000}, language = {en} } @article{BallatoCifelliHeidarzadehetal.2017, author = {Ballato, Paolo and Cifelli, Francesca and Heidarzadeh, Ghasem and Ghassemi, Mohammad R. and Wickert, Andrew D. and Hassanzadeh, Jamshid and Dupont-Nivet, Guillaume and Balling, Philipp and Sudo, Masafumi and Zeilinger, Gerold and Schmitt, Axel K. and Mattei, Massimo and Strecker, Manfred}, title = {Tectono-sedimentary evolution of the northern Iranian Plateau: insights from middle-late Miocene foreland-basin deposits}, series = {Basin research}, volume = {29}, journal = {Basin research}, publisher = {Wiley}, address = {Hoboken}, issn = {0950-091X}, doi = {10.1111/bre.12180}, pages = {417 -- 446}, year = {2017}, abstract = {Sedimentary basins in the interior of orogenic plateaus can provide unique insights into the early history of plateau evolution and related geodynamic processes. The northern sectors of the Iranian Plateau of the Arabia-Eurasia collision zone offer the unique possibility to study middle-late Miocene terrestrial clastic and volcaniclastic sediments that allow assessing the nascent stages of collisional plateau formation. In particular, these sedimentary archives allow investigating several debated and poorly understood issues associated with the long-term evolution of the Iranian Plateau, including the regional spatio-temporal characteristics of sedimentation and deformation and the mechanisms of plateau growth. We document that middle-late Miocene crustal shortening and thickening processes led to the growth of a basement-cored range (Takab Range Complex) in the interior of the plateau. This triggered the development of a foreland-basin (Great Pari Basin) to the east between 16.5 and 10.7Ma. By 10.7Ma, a fast progradation of conglomerates over the foreland strata occurred, most likely during a decrease in flexural subsidence triggered by rock uplift along an intraforeland basement-cored range (Mahneshan Range Complex). This was in turn followed by the final incorporation of the foreland deposits into the orogenic system and ensuing compartmentalization of the formerly contiguous foreland into several intermontane basins. Overall, our data suggest that shortening and thickening processes led to the outward and vertical growth of the northern sectors of the Iranian Plateau starting from the middle Miocene. This implies that mantle-flow processes may have had a limited contribution toward building the Iranian Plateau in NW Iran.}, language = {en} } @article{AlonsoBookhagenCarrapaetal.2006, author = {Alonso, Ricardo N. and Bookhagen, Bodo and Carrapa, Barbara and Coutand, Isabelle and Haschke, Michael and Hilley, George E. and Schoenbohm, Lindsay M. and Sobel, Edward and Strecker, Manfred and Trauth, Martin H. and Villanueva, Arturo}, title = {Tectonics, climate and landscape evolution of the Southern Central Andes : the Argentine Puna Plateau and adjacent regions between 22 and 30°S}, isbn = {978-3-540- 24329-8}, year = {2006}, language = {en} } @article{YildirimSchildgenEchtleretal.2013, author = {Yildirim, Cengiz and Schildgen, Taylor F. and Echtler, Helmut Peter and Melnick, Daniel and Bookhagen, Bodo and Ciner, T. Attila and Niedermann, Samuel and Merchel, Silke and Martschini, Martin and Steier, Peter and Strecker, Manfred}, title = {Tectonic implications of fluvial incision and pediment deformation at the northern margin of the Central Anatolian Plateau based on multiple cosmogenic nuclides}, series = {Tectonics}, volume = {32}, journal = {Tectonics}, number = {5}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1002/tect.20066}, pages = {1107 -- 1120}, year = {2013}, abstract = {We document Quaternary fluvial incision driven by fault-controlled surface deformation in the inverted intermontane G{\"o}kirmak Basin in the Central Pontide mountains along the northern margin of the Central Anatolian Plateau. In-situ-produced Be-10, Ne-21, and Cl-36 concentrations from gravel-covered fluvial terraces and pediment surfaces along the trunk stream of the basin (the G{\"o}kirmak River) yield model exposure ages ranging from 71ka to 34645ka and average fluvial incision rates over the past similar to 350ka of 0.280.01mm a(-1). Similarities between river incision rates and coastal uplift rates at the Black Sea coast suggest that regional uplift is responsible for the river incision. Model exposure ages of deformed pediment surfaces along tributaries of the trunk stream range from 605ka to 110 +/- 10ka, demonstrating that the thrust faults responsible for pediment deformation were active after those times and were likely active earlier as well as explaining the topographic relief of the region. Together, our data demonstrate cumulative incision that is linked to active internal shortening and uplift of similar to 0.3mm a(-1) in the Central Pontide orogenic wedge, which may ultimately contribute to the lateral growth of the northern Anatolian Plateau.}, language = {en} } @article{GeorgievaMelnickSchildgenetal.2016, author = {Georgieva, Viktoria and Melnick, Daniel and Schildgen, Taylor F. and Ehlers, Todd and Lagabrielle, Yves and Enkelmann, Eva and Strecker, Manfred}, title = {Tectonic control on rock uplift, exhumation, and topography above an oceanic ridge collision: Southern Patagonian Andes (47 degrees S), Chile}, series = {Tectonics}, volume = {35}, journal = {Tectonics}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1002/2016TC004120}, pages = {1317 -- 1341}, year = {2016}, abstract = {The subduction of bathymetric anomalies at convergent margins can profoundly affect subduction dynamics, magmatism, and the structural and geomorphic evolution of the overriding plate. The Northern Patagonian Icefield (NPI) is located east of the Chile Triple Junction at similar to 47 degrees S, where the Chile Rise spreading center collides with South America. This region is characterized by an abrupt increase in summit elevations and relief that has been controversially debated in the context of geodynamic versus glacial erosion effects on topography. Here we present geomorphic, thermochronological, and structural data that document neotectonic activity along hitherto unrecognized faults along the flanks of the NPI. New apatite (U-Th)/He bedrock cooling ages suggest faulting since 2-3 Ma. We infer the northward translation of an similar to 140 km long fore-arc sliver-the NPI block-results from enhanced partitioning of oblique plate convergence due to the closely spaced collision of three successive segments of the Chile Rise. In this model, greater uplift occurs in the hanging wall of the Exploradores thrust at the northern leading edge of the NPI block, whereas the Cachet and Liquine-Ofqui dextral faults decouple the NPI block along its eastern and western flanks, respectively. Localized extension possibly occurs at its southern trailing edge along normal faults associated with margin-parallel extension, tectonic subsidence, and lower elevations along the Andean crest line. Our neotectonic model provides a novel explanation for the abrupt topographic variations inland of the Chile Triple Junction and emphasizes the fundamental effects of local tectonics on exhumation and topographic patterns in this glaciated landscape.}, language = {en} }