@article{OenerQuerebilloDavidetal.2018, author = {{\"O}ner, Ibrahim Halil and Querebillo, Christine Joy and David, Christin and Gernert, Ulrich and Walter, Carsten and Driess, Matthias and Leimk{\"u}hler, Silke and Ly, Khoa Hoang and Weidinger, Inez M.}, title = {High electromagnetic field enhancement of TiO2 nanotube electrodes}, series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition}, volume = {57}, journal = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition}, number = {24}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1433-7851}, doi = {10.1002/anie.201802597}, pages = {7225 -- 7229}, year = {2018}, abstract = {We present the fabrication of TiO2 nanotube electrodes with high biocompatibility and extraordinary spectroscopic properties. Intense surface-enhanced resonance Raman signals of the heme unit of the redox enzyme Cytochromeb(5) were observed upon covalent immobilization of the protein matrix on the TiO2 surface, revealing overall preserved structural integrity and redox behavior. The enhancement factor could be rationally controlled by varying the electrode annealing temperature, reaching a record maximum value of over 70 at 475 degrees C. For the first time, such high values are reported for non-directly surface-interacting probes, for which the involvement of charge-transfer processes in signal amplification can be excluded. The origin of the surface enhancement is exclusively attributed to enhanced localized electric fields resulting from the specific optical properties of the nanotubular geometry of the electrode.}, language = {en} } @article{ZivanovicKochovskiArenzetal.2018, author = {Zivanovic, Vesna and Kochovski, Zdravko and Arenz, Christoph and Lu, Yan and Kneipp, Janina}, title = {SERS and Cryo-EM Directly Reveal Different Liposome Structures during Interaction with Gold Nanoparticles}, series = {The journal of physical chemistry letters}, volume = {9}, journal = {The journal of physical chemistry letters}, number = {23}, publisher = {American Chemical Society}, address = {Washington}, issn = {1948-7185}, doi = {10.1021/acs.jpclett.8b03191}, pages = {6767 -- 6772}, year = {2018}, abstract = {The combination of gold nanoparticles with liposomes is important for nano- and biotechnology. Here, we present direct, label-free characterization of liposome structure and composition at the site of its interaction with citrate-stabilized gold nanoparticles by surface-enhanced Raman scattering (SERS) and cryogenic electron microscopy (cryo-EM). Evidenced by the vibrational spectra and cryo-EM, the gold nanoparticles destroy the bilayer structure of interacting liposomes in the presence of a high amount of citrate, while at lower citrate concentration the nanoparticles interact with the surface of the intact liposomes. The spectra of phosphatidylcholine and phosphatidylcholine/sphingomyelin liposomes show that at the site of interaction the lipid chains are in the gel phase. The SERS spectra indicate that cholesterol has strong effects on the contacts of the vesicles with the nanoparticles. By combining cryo-EM and SERS, the structure and properties of lipid nanoparticle composites could be tailored for the development of drug delivery systems.}, language = {en} } @article{ZimmermannJohnGrigorievetal.2018, author = {Zimmermann, Marc and John, Daniela and Grigoriev, Dmitry and Puretskiy, Nikolay and B{\"o}ker, Alexander}, title = {From 2D to 3D patches on multifunctional particles}, series = {Soft matter}, volume = {14}, journal = {Soft matter}, number = {12}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c8sm00163d}, pages = {2301 -- 2309}, year = {2018}, abstract = {A straightforward approach for the precise multifunctional surface modification of particles with three-dimensional patches using microcontact printing is presented. By comparison to previous works it was possible to not only control the diameter, but also to finely tune the thickness of the deposited layer, opening up the way for three-dimensional structures and orthogonal multifunctionality. The use of PEI as polymeric ink, PDMS stamps for microcontact printing on silica particles and the influence of different solvents during particle release on the creation of functional particles with three-dimensional patches are described. Finally, by introducing fluorescent properties by incorporation of quantum dots into patches and by particle self-assembly via avidin-biotin coupling, the versatility of this novel modification method is demonstrated.}, language = {en} } @article{ZimmermannGrigorievPuretskiyetal.2018, author = {Zimmermann, Marc and Grigoriev, Dmitry and Puretskiy, Nikolay and B{\"o}ker, Alexander}, title = {Characteristics of microcontact printing with polyelectrolyte ink for the precise preparation of patches on silica particles}, series = {RSC Advances}, volume = {8}, journal = {RSC Advances}, number = {69}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2046-2069}, doi = {10.1039/c8ra07955b}, pages = {39241 -- 39247}, year = {2018}, abstract = {This publication demonstrates the abilities of a precise and straightforward microcontact printing approach for the preparation of patchy silica particles. In a broad particle size range, it is possible to finely tune the number and parameters of three-dimensional patches like diameter and thickness using only polyethyleneimine ink, poly(dimethoxysilane) as stamp material and a suitable release solvent.}, language = {en} } @phdthesis{Zimmermann2018, author = {Zimmermann, Marc}, title = {Multifunctional patchy silica particles via microcontact printing}, doi = {10.25932/publishup-42773}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427731}, school = {Universit{\"a}t Potsdam}, pages = {IX, 121, xiii}, year = {2018}, abstract = {This research addressed the question, if it is possible to simplify current microcontact printing systems for the production of anisotropic building blocks or patchy particles, by using common chemicals while still maintaining reproducibility, high precision and tunability of the Janus-balance Chapter 2 introduced the microcontact printing materials as well as their defined electrostatic interactions. In particular polydimethylsiloxane stamps, silica particles and high molecular weight polyethylenimine ink were mainly used in this research. All of these components are commercially available in large quantities and affordable, which gives this approach a huge potential for further up-scaling developments. The benefits of polymeric over molecular inks was described including its flexible influence on the printing pressure. With this alteration of the µCP concept, a new method of solvent assisted particle release mechanism enabled the switch from two-dimensional surface modification to three-dimensional structure printing on colloidal silica particles, without changing printing parameters or starting materials. This effect opened the way to use the internal volume of the achieved patches for incorporation of nano additives, introducing additional physical properties into the patches without alteration of the surface chemistry. The success of this system and its achievable range was further investigated in chapter 3 by giving detailed information about patch geometry parameters including diameter, thickness and yield. For this purpose, silica particles in a size range between 1µm and 5µm were printed with different ink concentrations to change the Janus-balance of these single patched particles. A necessary intermediate step, consisting of air-plasma treatment, for the production of trivalent particles using "sandwich" printing was discovered and comparative studies concerning the patch geometry of single and double patched particles were conducted. Additionally, the usage of structured PDMS stamps during printing was described. These results demonstrate the excellent precision of this approach and opens the pathway for even greater accuracy as further parameters can be finely tuned and investigated, e.g. humidity and temperature during stamp loading. The performance of these synthesized anisotropic colloids was further investigated in chapter 4, starting with behaviour studies in alcoholic and aqueous dispersions. Here, the stability of the applied patches was studied in a broad pH range, discovering a release mechanism by disabling the electrostatic bonding between particle surface and polyelectrolyte ink. Furthermore, the absence of strong attractive forces between divalent particles in water was investigated using XPS measurements. These results lead to the conclusion that the transfer of small PDMS oligomers onto the patch surface is shielding charges, preventing colloidal agglomeration. However, based on this knowledge, further patch modifications for particle self-assembly were introduced including physical approaches using magnetic nano additives, chemical patch functionalization with avidin-biotin or the light responsive cyclodextrin-arylazopyrazoles coupling as well as particle surface modification for the synthesis of highly amphiphilic colloids. The successful coupling, its efficiency, stability and behaviour in different solvents were evaluated to find a suitable coupling system for future assembly experiments. Based on these results the possibility of more sophisticated structures by colloidal self-assembly is given. Certain findings needed further analysis to understand their underlying mechanics, including the relatively broad patch diameter distribution and the decreasing patch thickness for smaller silica particles. Mathematical assumptions for both effects are introduced in chapter 5. First, they demonstrate the connection between the naturally occurring particle size distribution and the broadening of the patch diameter, indicating an even higher precision for this µCP approach. Second, explaining the increase of contact area between particle and ink surface due to higher particle packaging, leading to a decrease in printing pressure for smaller particles. These calculations ultimately lead to the development of a new mechanical microcontact printing approach, using centrifugal forces for high pressure control and excellent parallel alignment of printing substrates. First results with this device and the comparison with previously conducted by-hand experiments conclude this research. It furthermore displays the advantages of such a device for future applications using a mechanical printing approach, especially for accessing even smaller nano particles with great precision and excellent yield. In conclusion, this work demonstrates the successful adjustment of the µCP approach using commercially available and affordable silica particles and polyelectrolytes for high flexibility, reduced costs and higher scale-up value. Furthermore, its was possible to increase the modification potential by introducing three-dimensional patches for additional functionalization volume. While keeping a high colloidal stability, different coupling systems showed the self-assembly capabilities of this toolbox for anisotropic particles.}, language = {en} } @phdthesis{Zimmermann2018, author = {Zimmermann, Diana}, title = {Direkte Arylierung}, school = {Universit{\"a}t Potsdam}, pages = {221}, year = {2018}, language = {de} } @article{ZhongMiMetwallietal.2018, author = {Zhong, Qi and Mi, Lei and Metwalli, Ezzeldin and Biessmann, Lorenz and Philipp, Martine and Miasnikova, Anna and Laschewsky, Andre and Papadakis, Christine M. and Cubitt, Robert and Schwartzkopf, Matthias and Roth, Stephan V. and Wang, Jiping and M{\"u}ller-Buschbaum, Peter}, title = {Effect of chain architecture on the swelling and thermal response of star-shaped thermo-responsive (poly(methoxy diethylene glycol acrylate)-block-polystyrene)(3) block copolymer films}, series = {Soft matter}, volume = {14}, journal = {Soft matter}, number = {31}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c8sm00965a}, pages = {6582 -- 6594}, year = {2018}, abstract = {The effect of chain architecture on the swelling and thermal response of thin films obtained from an amphiphilic three-arm star-shaped thermo-responsive block copolymer poly(methoxy diethylene glycol acrylate)-block-polystyrene ((PMDEGA-b-PS)(3)) is investigated by in situ neutron reflectivity (NR) measurements. The PMDEGA and PS blocks are micro-phase separated with randomly distributed PS nanodomains. The (PMDEGA-b-PS)(3) films show a transition temperature (TT) at 33 degrees C in white light interferometry. The swelling capability of the (PMDEGA-b-PS)(3) films in a D2O vapor atmosphere is better than that of films from linear PS-b-PMDEGA-b-PS triblock copolymers, which can be attributed to the hydrophilic end groups and limited size of the PS blocks in (PMDEGA-b-PS)(3). However, the swelling kinetics of the as-prepared (PMDEGA-b-PS)(3) films and the response of the swollen film to a temperature change above the TT are significantly slower than that in the PS-b-PMDEGA-b-PS films, which may be related to the conformation restriction by the star-shape. Unlike in the PS-b-PMDEGA-b-PS films, the amount of residual D2O in the collapsed (PMDEGA-b-PS)(3) films depends on the final temperature. It decreases from (9.7 +/- 0.3)\% to (7.0 +/- 0.3)\% or (6.0 +/- 0.3)\% when the final temperatures are set to 35 degrees C, 45 degrees C and 50 degrees C, respectively. This temperature-dependent reduction of embedded D2O originates from the hindrance of chain conformation from the star-shaped chain architecture.}, language = {en} } @article{ZhengBaiTaoetal.2018, author = {Zheng, Botuo and Bai, Tianwen and Tao, Xinfeng and Schlaad, Helmut and Ling, Jun}, title = {Identifying the Hydrolysis of Carbonyl Sulfide as a Side Reaction Impeding the Polymerization of N-Substituted Glycine N-Thiocarboxyanhydride}, series = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences}, volume = {19}, journal = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences}, number = {11}, publisher = {American Chemical Society}, address = {Washington}, issn = {1525-7797}, doi = {10.1021/acs.biomac.8b01119}, pages = {4263 -- 4269}, year = {2018}, abstract = {Polypeptoids are noticeable biological materials due to their versatile properties and various applications in drug delivery, surface modification, self-assembly, etc. N-Substituted glycine N-thiocarboxyanhydrides (NNTAs) are more stable monomers than the corresponding N-carboxyanhydrides (NNCAs) and enable one to prepare polypeptoids via ring-opening polymerization even in the presence of water. However, larger amounts of water (>10,000 ppm) cause inhibition of the polymerization. Herein, we discover that during polymerization hydrogen sulfide evolves from the hydrolysis of carbonyl sulfide, which is the byproduct of ring-opening reaction, and reacts with NNTA to produce cyclic oligopeptoids. The capture of N-ethylethanethioic acid as an intermediate product confirms the reaction mechanism together with density functional theory quantum computational results. By bubbling the polymerization solution with argon, the side reaction can be suppressed to allow the synthesis of polysarcosine with high molar mass (M-n = 11,200 g/mol, D = 1.25) even in the presence of similar to 10,000 ppm of water.}, language = {en} } @phdthesis{Zhang2018, author = {Zhang, Quanchao}, title = {Shape-memory properties of polymeric micro-scale objects prepared by electrospinning and electrospraying}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 53}, year = {2018}, abstract = {The ongoing trend of miniaturizing multifunctional devices, especially for minimally-invasive medical or sensor applications demands new strategies for designing the required functional polymeric micro-components or micro-devices. Here, polymers, which are capable of active movement, when an external stimulus is applied (e.g. shape-memory polymers), are intensively discussed as promising material candidates for realization of multifunctional micro-components. In this context further research activities are needed to gain a better knowledge about the underlying working principles for functionalization of polymeric micro-scale objects with a shape-memory effect. First reports about electrospun solid microfiber scaffolds, demonstrated a much more pronounced shape-memory effect than their bulk counterparts, indicating the high potential of electrospun micro-objects. Based on these initial findings this thesis was aimed at exploring whether the alteration of the geometry of micro-scale electrospun polymeric objects can serve as suitable parameter to tailor their shape-memory properties. The central hypothesis was that different geometries should result in different degrees of macromolecular chain orientation in the polymeric micro-scale objects, which will influence their mechanical properties as well as thermally-induced shape-memory function. As electrospun micro-scale objects, microfiber scaffolds composed of hollow microfibers with different wall thickness and electrosprayed microparticles as well as their magneto-sensitive nanocomposites all prepared from the same polymer exhibiting pronounced bulk shape-memory properties were investigated. For this work a thermoplastic multiblock copolymer, named PDC, with excellent bulk shape-memory properties, associated with crystallizable oligo(ε-caprolactone) (OCL) switching domains, was chosen for the preparation of electrospun micro-scale objects, while crystallizable oligo(p-dioxanone) (OPDO) segments serve as hard domains in PDC. In the first part of the thesis microfiber scaffolds with different microfiber geometries (solid or hollow with different wall thickness) were discussed. Hollow microfiber based PDC scaffolds were prepared by coaxial electrospinning from a 1, 1, 1, 3, 3, 3 hexafluoro-2-propanol (HFP) solution with a polymer concentration of 13\% w·v-1. Here as a first step core-shell fiber scaffolds consisting of microfibers with a PDC shell and sacrificial poly(ethylene glycol) (PEG) core are generated. The hollow PDC microfibers were achieved after dissolving the PEG core with water. The utilization of a fixed electrospinning setup and the same polymer concentration of the PDC spinning solution could ensure the fabrication of microfibers with almost identical outer diameters of 1.4 ± 0.3 µm as determined by scanning electron microscopy (SEM). Different hollow microfiber wall thicknesses of 0.5 ± 0.2 and 0.3 ± 0.2 µm (analyzed by SEM) have been realized by variation of the mass flow rate, while solid microfibers were obtained by coaxial electrospinning without supplying any core solution. Differential scanning calorimetry experiments and tensile tests at ambient temperature revealed an increase in degree of OCL crystallinity form χc,OCL = 34 ± 1\% to 43 ± 1\% and a decrease in elongation of break from 800 ± 40\% to 200 ± 50\% associated with an increase in Young´s modulus and failture stress for PDC hollow microfiber scaffolds when compared with soild fibers. The observed effects were enhanced with decreasing wall thickness of the single hollow fibers. The shape-memory properties of the electrospun PDC scaffolds were quantified by cyclic, thermomechanical tensile tests. Here, scaffolds comprising hollow microfibers exhibited lower shape fixity ratios around Rf = 82 ± 1\% and higher shape recovery ratios of Rr = 67 ± 1\% associated to more pronounced relaxation at constant strain during the first test cycle and a lower switching temperature of Tsw = 33 ± 1 °C than the fibrous meshes consisting of solid microfibers. These findings strongly support the central hypothesis that different fiber geometries (solid or hollow with different wall thickness) in electrospun scaffolds result in different degrees of macromolecular chain orientation in the polymeric micro-scale objects, which can be applied as design parameter for tailoring their mechanical and shape-memory properties. The second part of the thesis deals with electrosprayed particulate PDC micro-scale objects. Almost spherical PDC microparticles with diameters of 3.9 ± 0.9 μm (as determined by SEM) were achieved by electrospraying of HFP solution with a polymer concentration of 2\% w·v-1. In contrast, smaller particles with sizes of 400 ± 100 nm or 1.2 ± 0.3 μm were obtained for the magneto-sensitive composite PDC microparticles containing 23 ± 0.5 wt\% superparamagnetic magnetite nanoparticles (mNPs). All prepared PDC microparticles exhibited a similar overall crystallinity like the PDC bulk material as analyzed by DSC. AFM nanoindentation results revealed no influence of the nanofiller incorporation on the local mechanical properties represented by the reduced modulus determined for pure PDC microparticles and magneto-sensitive composite PDC microparticles with similar diameters around 1.3 µm. It was found that the reduced modulus of the nanocomposite microparticles increased substantially with decreasing particles size from 2.4 ± 0.9 GPa (1.2 µm) to 11.9 ± 3.1 GPa (0.4 µm), which can be related to a higher orientation of the macromolecules at the surface of smaller sized microparticles. The magneto-sensitivity of such nanocomposite microparticles could be demonstrated in two aspects. One was by attracting/collecting the composite micro-objects with an external permanent magnet. The other one was by a inductive heating to 44 ± 1 °C, which is well above the melting transition of the OCL switching domains, when compacted to a 10 x 10 mm2 film with a thickness of 10 µm and exposed to an alternating magnet field with an magnetic field strength of 30 kA·m-1. Both functions are of great relevance for designing next generation drug delivery systems combining targeting and on demand release. By a compression approach shape-memory functionalization of individual microparticles could be realized. Here different programming pressures and compression temperatures were applied. The shape-recovery capability of the programmed PDC microparticles was quantified by online and off-line heating experiments analyzed via microscopy measurement. The obtained shape-memory properties were found to be strongly depending on the applied programming pressure and temperature. The best shape-memory performance with a high shape recovery rate of about Rr = 80±1\% was obtained when a low pressure of 0.2 MPa was applied at 55 °C. Finally, it was demonstrated that PDC microparticles can be utilized as micro building parts for preparation of a macroscopic film with temporary stability by compression of a densely packed array of PDC microparticles at 60 °C followed by subsequent cooling to ambient temperature. This film disintegrates into individual microparticles upon heating to 60 °C. Based on this technology the design of stable macroscopic release systems can be envisioned, which can be easily fixed at the site of treatment (i.e. by suturing) and disintegrate on demand to microparticles facilitating the drug release. In summary, the results of this thesis could confirm the central hypothesis that the variation of the geometry of polymeric micro-objects is a suitable parameter to adjust their shape-memory performance by changing the degree of macromolecular chain orientation in the specimens or by enabling new functions like on demand disintegration. These fundamental findings might be relevant for designing novel miniaturized multifunctional polymer-based devices.}, language = {en} } @misc{YarmanKurbanogluJetzschmannetal.2018, author = {Yarman, Aysu and Kurbanoglu, Sevinc and Jetzschmann, Katharina J. and Ozkan, Sibel A. and Wollenberger, Ulla and Scheller, Frieder W.}, title = {Electrochemical MIP-Sensors for Drugs}, series = {Current Medicinal Chemistry}, volume = {25}, journal = {Current Medicinal Chemistry}, number = {33}, publisher = {Bentham Science Publishers LTD}, address = {Sharjah}, issn = {0929-8673}, doi = {10.2174/0929867324666171005103712}, pages = {4007 -- 4019}, year = {2018}, abstract = {In order to replace bio-macromolecules by stable synthetic materials in separation techniques and bioanalysis biomimetic receptors and catalysts have been developed: Functional monomers are polymerized together with the target analyte and after template removal cavities are formed in the "molecularly imprinted polymer" (MIP) which resemble the active sites of antibodies and enzymes. Starting almost 80 years ago, around 1,100 papers on MIPs were published in 2016. Electropolymerization allows to deposit MIPs directly on voltammetric electrodes or chips for quartz crystal microbalance (QCM) and surface plasmon resonance (SPR). For the readout of MIPs for drugs amperometry, differential pulse voltammetry (DPV) and impedance spectroscopy (EIS) offer higher sensitivity as compared with QCM or SPR. Application of simple electrochemical devices allows both the reproducible preparation of MIP sensors, but also the sensitive signal generation. Electrochemical MIP-sensors for the whole arsenal of drugs, e.g. the most frequently used analgesics, antibiotics and anticancer drugs have been presented in literature and tested under laboratory conditions. These biomimetic sensors typically have measuring ranges covering the lower nano-up to millimolar concentration range and they are stable under extreme pH and in organic solvents like nonaqueous extracts.}, language = {en} } @article{YaoubaKochGuantaietal.2018, author = {Yaouba, Souaibou and Koch, Andreas and Guantai, Eric M. and Derese, Solomon and Irungu, Beatrice and Heydenreich, Matthias and Yenesew, Abiy}, title = {Alkenyl cyclohexanone derivatives from Lannea rivae and Lannea schweinfurthii}, series = {Phytochemistry letters / Phytochemical Society of Europe}, volume = {23}, journal = {Phytochemistry letters / Phytochemical Society of Europe}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1874-3900}, doi = {10.1016/j.phytol.2017.12.001}, pages = {141 -- 148}, year = {2018}, abstract = {Phytochemical investigation of the CH2Cl2/MeOH (1:1) extract of the roots of Lannea rivae (Chiov) Sacleux (Anacardiaceae) led to the isolation of a new alkenyl cyclohexenone derivative: (4R,6S)-4,6-dihydroxy-6-((Z)-nonadec-14′-en-1-yl)cyclohex-2-en-1-one (1), and a new alkenyl cyclohexanol derivative: (2S*,4R*,5S*)-2,4,5-trihydroxy-2-((Z)-nonadec-14′-en-1-yl)cyclohexanone (2) along with four known compounds, namely epicatechin gallate, taraxerol, taraxerone and β-sitosterol; while the stem bark afforded two known compounds, daucosterol and lupeol. Similar investigation of the roots of Lannea schweinfurthii (Engl.) Engl. led to the isolation of four known compounds: 3-((E)-nonadec-16′-enyl)phenol, 1-((E)-heptadec-14′-enyl)cyclohex-4-ene-1,3-diol, catechin, and 1-((E)-pentadec-12′-enyl)cyclohex-4-ene-1,3-diol. The structures of the isolated compounds were determined by NMR spectroscopy and mass spectrometry. The absolute configuration of compound 1 was established by quantum chemical ECD calculations. In an antibacterial activity assay using the microbroth kinetic method, compound 1 showed moderate activity against Escherichia coli while compound 2 exhibited moderate activity against Staphylococcus aureus. Compound 1 also showed moderate activity against E. coli using the disc diffusion method. The roots extract of L. rivae was notably cytotoxic against both the DU-145 prostate cancer cell line and the Vero mammalian cell line (CC50 = 5.24 and 5.20 μg/mL, respectively). Compound 1 was also strongly cytotoxic against the DU-145 cell line (CC50 = 0.55 μg/mL) but showed no observable cytotoxicity (CC50 > 100 μg/mL) against the Vero cell line. The roots extract of L. rivae and L. schweinfurthii, epicatechin gallate as well as compound 1 exhibited inhibition of carageenan-induced inflammation.}, language = {en} } @article{YangHuDingetal.2018, author = {Yang, Guang and Hu, Rongting and Ding, Hong-ming and Kochovski, Zdravko and Mei, Shilin and Lu, Yan and Ma, Yu-qiang and Chen, Guosong and Jiang, Ming}, title = {CO2-switchable response of protein microtubules}, series = {Materials chemistry frontiers}, volume = {2}, journal = {Materials chemistry frontiers}, number = {9}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2052-1537}, doi = {10.1039/c8qm00245b}, pages = {1642 -- 1646}, year = {2018}, abstract = {Recently, we proposed a small molecular inducing ligand strategy to assemble proteins into highly-ordered structures via dual non-covalent interactions, i.e. carbohydrate-protein interaction and dimerization of Rhodamine B. Using this approach, artificial protein microtubules were successfully constructed. In this study, we find that these microtubules exhibit a perfect CO2 responsiveness; assembly and disassembly of these microtubules were nicely controlled by the alternative passage of CO2 and N-2. Upon the injection of CO2, a negative net-charged SBA turns into a neutral or positive net-charged SBA, which elongated, to some extent, the effective distance between SBA and Rhodamine B, resulting in the disassociation of the Rhodamine B dimer. Further experimental and simulation results reveal that the CO2-responsive mechanism differs from that of solubility change of the previously reported CO2-responsive synthetic materials.}, language = {en} } @article{YanRudolphNoecheletal.2018, author = {Yan, Wan and Rudolph, Tobias and N{\"o}chel, Ulrich and Gould, Oliver E. C. and Behl, Marc and Kratz, Karl and Lendlein, Andreas}, title = {Reversible actuation of thermoplastic multiblock copolymers with overlapping thermal transitions of crystalline and glassy domains}, series = {Macromolecules : a publication of the American Chemical Society}, volume = {51}, journal = {Macromolecules : a publication of the American Chemical Society}, number = {12}, publisher = {American Chemical Society}, address = {Washington}, issn = {0024-9297}, doi = {10.1021/acs.macromol.8b00322}, pages = {4624 -- 4632}, year = {2018}, abstract = {Polymeric materials possessing specific features like programmability, high deformability, and easy processability are highly desirable for creating modern actuating systems. In this study, thermoplastic shape-memory polymer actuators obtained by combining crystallizable poly(epsilon-caprolactone) (PCL) and poly(3S-isobutylmorpholin-2,5-dione) (PIBMD) segments in multiblock copolymers are described. We designed these materials according to our hypothesis that the confinement of glassy PIBMD domains present at the upper actuation temperature contribute to the stability of the actuator skeleton, especially at large programming strains. The copolymers have a phase-segregated morphology, indicated by the well-separated melting and glass transition temperatures for PIBMD and PCL, but possess a partially overlapping T-m of PCL and T-g of PIBMD in the temperature interval from 40 to 60 degrees C. Crystalline PIBMD hard domains act as strong physical netpoints in the PIBMD-PCL bulk material enabling high deformability (up to 2000\%) and good elastic recoverability (up to 80\% at 50 degrees C above T-m,T-PCL). In the programmed thermoplastic actuators a high content of crystallizable PCL actuation domains ensures pronounced thermoreversible shape changes upon repetitive cooling and heating. The programmed actuator skeleton, composed of PCL crystals present at the upper actuation temperature T-high and the remaining glassy PIBMD domains, enabled oriented crystallization upon cooling. The actuation performance of PIBMD-PCL could be tailored by balancing the interplay between actuation and skeleton, but also by varying the quantity of crystalline PIBMD hard domains via the copolymer composition, the applied programming strain, and the choice of T-high. The actuator with 17 mol\% PIBMD showed the highest reversible elongation of 11.4\% when programmed to a strain of 900\% at 50 degrees C. It is anticipated that the presented thermoplastic actuator materials can be applied as modern compression textiles.}, language = {en} } @article{YalcinkayaBresselLindneretal.2018, author = {Yalcinkaya, Hacer and Bressel, Katharina and Lindner, Peter and Gradzielski, Michael}, title = {Controlled formation of vesicles with added styrene and their fixation by polymerization}, series = {Journal of colloid and interface science}, volume = {531}, journal = {Journal of colloid and interface science}, publisher = {Elsevier}, address = {San Diego}, issn = {0021-9797}, doi = {10.1016/j.jcis.2018.07.097}, pages = {672 -- 680}, year = {2018}, abstract = {Hypothesis: An effective way for fixating vesicle structures is the insertion of monomers and cross-linking agents into their bilayer, and their subsequent polymerization can lead to the formation of polymeric nanocapsules. Particularly attractive here are vesicle systems that form spontaneously well-defined small vesicles, as obtaining such small nanocapsules with sizes below 100 nm is still challenging. Experiments: A spontaneously forming well-defined vesicle system composed of the surfactants TDMAO (tetradecyldimethylamine oxide), Pluronic L35, and LiPFOS (lithium perfluorooctylsulfonate) mixture was used as template for fixation by polymerization. Therefore, styrene monomer was incorporated into the vesicle bilayer and ultimately these structures were fixated by UV induced radical polymerization. Structural alteration of the vesicles upon loading with monomer and the cross-linker as well as the effect of subsequent polymerization in the membrane were investigated in detail by turbidity measurements, dynamic and static light scattering, (DLS, SLS), and small angle neutron scattering (SANS). Findings: The analysis showed the changes on vesicle structures due to the monomer loading, and that these structures can become permanently fixed by the polymerization process. The potential of this approach to produce well-defined nanocapsules starting from a self-assembled system and following polymerization is critically evaluated. (C) 2018 Elsevier Inc. All rights reserved.}, language = {en} } @article{XuAngiolettiUbertiLuetal.2018, author = {Xu, Xiao and Angioletti-Uberti, Stefano and Lu, Yan and Dzubiella, Joachim and Ballauff, Matthias}, title = {Interaction of Proteins with Polyelectrolytes}, series = {Langmuir}, volume = {35}, journal = {Langmuir}, number = {16}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.8b01802}, pages = {5373 -- 5391}, year = {2018}, abstract = {We discuss recent investigations of the interaction of polyelectrolytes with proteins. In particular, we review our recent studies on the interaction of simple proteins such as human serum albumin (HSA) and lysozyme with linear polyelectrolytes, charged dendrimers, charged networks, and polyelectrolyte brushes. In all cases discussed here, we combined experimental work with molecular dynamics (MD) simulations and mean-field theories. In particular, isothermal titration calorimetry (ITC) has been employed to obtain the respective binding constants K-b and the Gibbs free energy of binding. MD simulations with explicit counterions but implicit water demonstrate that counterion release is the main driving force for the binding of proteins to strongly charged polyelectrolytes: patches of positive charges located on the surface of the protein become multivalent counterions of the polyelectrolyte, thereby releasing a number of counterions condensed on the polyelectrolyte. The binding Gibbs free energy due to counterion release is predicted to scale with the logarithm of the salt concentration in the system, which is verified by both simulations and experiment. In several cases, namely, for the interaction of proteins with linear polyelectrolytes and highly charged hydrophilic dendrimers, the binding constant could be calculated from simulations to very good approximation. This finding demonstrated that in these cases explicit hydration effects do not contribute to the Gibbs free energy of binding. The Gibbs free energy can also be used to predict the kinetics of protein uptake by microgels for a given system by applying dynamic density functional theory. The entire discussion demonstrates that the direct comparison of theory with experiments can lead to a full understanding of the interaction of proteins with charged polymers. Possible implications for applications, such as drug design, are discussed.}, language = {en} } @article{XiongWłodarczykGallandietal.2018, author = {Xiong, Tao and Włodarczyk, Radosław Stanisław and Gallandi, Lukas and K{\"o}rzd{\"o}rfer, Thomas and Saalfrank, Peter}, title = {Vibrationally resolved photoelectron spectra of lower diamondoids}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry}, volume = {148}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry}, number = {4}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/1.5012131}, pages = {9}, year = {2018}, abstract = {Vibrationally resolved lowest-energy bands of the photoelectron spectra (PES) of adamantane, diamantane, and urotropine were simulated by a time-dependent correlation function approach within the harmonic approximation. Geometries and normal modes for neutral and cationic molecules were obtained from B3LYP hybrid density functional theory (DFT). It is shown that the simulated spectra reproduce the experimentally observed vibrational finestructure (or its absence) quite well. Origins of the finestructure are discussed and related to recurrences of autocorrelation functions and dominant vibrations. Remaining quantitative and qualitative errors of the DFT-derived PES spectra refer to (i) an overall redshift by ∼0.5 eV and (ii) the absence of satellites in the high-energy region of the spectra. The former error is shown to be due to the neglect of many-body corrections to ordinary Kohn-Sham methods, while the latter has been argued to be due to electron-nuclear couplings beyond the Born-Oppenheimer approximation [Gali et al., Nat. Commun. 7, 11327 (2016)].}, language = {en} } @article{XiongWlodarczykSaalfrank2018, author = {Xiong, Tao and Wlodarczyk, Radoslaw and Saalfrank, Peter}, title = {Vibrationally resolved absorption and fluorescence spectra of perylene and N-substituted derivatives from autocorrelation function approaches}, series = {Chemical physics : a journal devoted to experimental and theoretical research involving problems of both a chemical and physical nature}, volume = {515}, journal = {Chemical physics : a journal devoted to experimental and theoretical research involving problems of both a chemical and physical nature}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0301-0104}, doi = {10.1016/j.chemphys.2018.06.011}, pages = {728 -- 736}, year = {2018}, abstract = {Vibrationally resolved absorption and emission (fluorescence) spectra of perylene and its N-derivatives in gas phase and in solution (acetonitrile) were simulated using a time-dependent approach based on correlation functions determined by density functional theory. By systematically varying the number and position of N atoms, it is shown that the presence of nitrogen heteroatoms has a negligible effect on the molecular structure and geometric distortions upon electronic transitions, while spectral properties change: in particular the number of N atoms is important while their position is less decisive. Thus, the N-substitution can be used to fine-tune the optical properties of perylene-based molecules.}, language = {en} } @phdthesis{Xiong2018, author = {Xiong, Tao}, title = {Vibrationally resolved absorption, emission, resonance Raman and photoelectron spectra of selected organic molecules, associated radicals and cations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418105}, school = {Universit{\"a}t Potsdam}, pages = {iv, 100}, year = {2018}, abstract = {Time-dependent correlation function based methods to study optical spectroscopy involving electronic transitions can be traced back to the work of Heller and coworkers. This intuitive methodology can be expected to be computationally efficient and is applied in the current work to study the vibronic absorption, emission, and resonance Raman spectra of selected organic molecules. Besides, the "non-standard" application of this approach to photoionization processes is also explored. The application section consists of four chapters as described below. In Chapter 4, the molar absorptivities and vibronic absorption/emission spectra of perylene and several of its N-substituted derivatives are investigated. By systematically varying the number and position of N atoms, it is shown that the presence of nitrogen heteroatoms has a negligible effect on the molecular structure and geometric distortions upon electronic transitions, while spectral properties are more sensitive: In particular the number of N atoms is important while their position is less decisive. Thus, N-substitution can be used to fine-tune the optical properties of perylene-based molecules. In Chapter 5, the same methods are applied to study the vibronic absorption/emission and resonance Raman spectra of a newly synthesized donor-acceptor type molecule. The simulated absorption/emission spectra agree fairly well with experimental data, with discrepancies being attributed to solvent effects. Possible modes which may dominate the fine-structure in the vibronic spectra are proposed by analyzing the correlation function with the aid of Raman and resonance Raman spectra. In the next two chapters, besides the above types of spectra, the methods are extended to study photoelectron spectra of several small diamondoid-related systems (molecules, radicals, and cations). Comparison of the photoelectron spectra with available experimental data suggests that the correlation function based approach can describe ionization processes reasonably well. Some of these systems, cationic species in particular, exhibit somewhat peculiar optical behavior, which presents them as possible candidates for functional devices. Correlation function based methods in a more general sense can be very versatile. In fact, besides the above radiative processes, formulas for non-radiative processes such as internal conversion have been derived in literature. Further implementation of the available methods is among our next goals.}, language = {en} } @article{WolffFrischmannSchulzeetal.2018, author = {Wolff, Christian Michael and Frischmann, Peter D. and Schulze, Marcus and Bohn, Bernhard J. and Wein, Robin and Livadas, Panajotis and Carlson, Michael T. and J{\"a}ckel, Frank and Feldmann, Jochen and W{\"u}rthner, Frank and Stolarczyk, Jacek K.}, title = {All-in-one visible-light-driven water splitting by combining nanoparticulate and molecular co-catalysts on CdS nanorods}, series = {Nature Energy}, volume = {3}, journal = {Nature Energy}, number = {10}, publisher = {Nature Publ. Group}, address = {London}, issn = {2058-7546}, doi = {10.1038/s41560-018-0229-6}, pages = {862 -- 869}, year = {2018}, abstract = {Full water splitting into hydrogen and oxygen on semiconductor nanocrystals is a challenging task; overpotentials must be overcome for both half-reactions and different catalytic sites are needed to facilitate them. Additionally, efficient charge separation and prevention of back reactions are necessary. Here, we report simultaneous H-2 and O-2 evolution by CdS nanorods decorated with nanoparticulate reduction and molecular oxidation co-catalysts. The process proceeds entirely without sacrificial agents and relies on the nanorod morphology of CdS to spatially separate the reduction and oxidation sites. Hydrogen is generated on Pt nanoparticles grown at the nanorod tips, while Ru(tpy)(bpy)Cl-2-based oxidation catalysts are anchored through dithiocarbamate bonds onto the sides of the nanorod. O-2 generation from water was verified by O-18 isotope labelling experiments, and time-resolved spectroscopic results confirmed efficient charge separation and ultrafast electron and hole transfer to the reaction sites. The system demonstrates that combining nanoparticulate and molecular catalysts on anisotropic nanocrystals provides an effective pathway for visible-light-driven photocatalytic water splitting.}, language = {en} } @article{WessigJohnMertens2018, author = {Wessig, Pablo and John, Leonard and Mertens, Monique}, title = {Extending the Class of [1,3]-Dioxolo[4.5-f]benzodioxole (DBD) Fluorescent Dyes}, series = {European journal of organic chemistry}, volume = {2018}, journal = {European journal of organic chemistry}, number = {14}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1434-193X}, doi = {10.1002/ejoc.201800002}, pages = {1674 -- 1681}, year = {2018}, abstract = {Synthetic routes to a collection of new fluorescent dyes are described, which are based on the [1,3]-dioxolo[4.5-f]benzodioxole (DBD) core. By introducing different electron withdrawing groups in 4- and 8-position of the DBD moiety the emission wavelength could be adjusted over a large spectral range from blue to orange light.}, language = {en} } @phdthesis{Werner2018, author = {Werner, Peter}, title = {Untersuchung stark-streuender Polymersuspensionen mittels optischer Methoden}, school = {Universit{\"a}t Potsdam}, pages = {XVIII, 119, XXXV}, year = {2018}, language = {de} } @article{WangRazzaqRudolphetal.2018, author = {Wang, Li and Razzaq, Muhammad Yasar and Rudolph, Tobias and Heuchel, Matthias and N{\"o}chel, Ulrich and Mansfeld, Ulrich and Jiang, Yi and Gould, Oliver E. C. and Behl, Marc and Kratz, Karl and Lendlein, Andreas}, title = {Reprogrammable, magnetically controlled polymeric nanocomposite actuators}, series = {Material horizons}, volume = {5}, journal = {Material horizons}, number = {5}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2051-6347}, doi = {10.1039/c8mh00266e}, pages = {861 -- 867}, year = {2018}, abstract = {Soft robots and devices with the advanced capability to perform adaptive motions similar to that of human beings often have stimuli-sensitive polymeric materials as the key actuating component. The external signals triggering the smart polymers' actuations can be transmitted either via a direct physical connection between actuator and controlling unit (tethered) or remotely without a connecting wire. However, the vast majority of such polymeric actuator materials are limited to one specific type of motion as their geometrical information is chemically fixed. Here, we present magnetically driven nanocomposite actuators, which can be reversibly reprogrammed to different actuation geometries by a solely physical procedure. Our approach is based on nanocomposite materials comprising spatially segregated crystallizable actuation and geometry determining units. Upon exposure to a specific magnetic field strength the actuators' geometric memory is erased by the melting of the geometry determining units allowing the implementation of a new actuator shape. The actuation performance of the nanocomposites can be tuned and the technical significance was demonstrated in a multi-cyclic experiment with several hundreds of repetitive free-standing shape shifts without losing performance.}, language = {en} } @phdthesis{Wang2018, author = {Wang, Li}, title = {Reprogrammable, magnetically controlled polymer actuators}, school = {Universit{\"a}t Potsdam}, pages = {xxviii, 107}, year = {2018}, abstract = {Polymeric materials, which can perform reversible shape changes after programming, in response to a thermal or electrical stimulation, can serve as (soft) actuating components in devices like artificial muscles, photonics, robotics or sensors. Such polymeric actuators can be realized with hydrogels, liquid crystalline elastomers, electro-active polymers or shape-memory polymers by controlling with stumuli such as heat, light, electrostatic or magnetic field. If the application conditions do not allow the direct heating or electric stimulation of these smart devices, noncontact triggering will be required. Remotely controlled actuation have been reported for liquid crystalline elastomer composites or shape-memory polymer network composites, when a persistent external stress is applied during inductive heating in an alternating magnetic field. However such composites cannot meet the demands of applications requiring remotely controlled free-standing motions of the actuating components. The current thesis investigates, whether a reprogrammable remotely controlled soft actuator can be realized by magneto-sensitive multiphase shape-memory copolymer network composites containing magnetite nanoparticles as magneto-sensitive multivalent netpoints. A central hypothesis was that a magnetically controlled two-way (reversible bidirectional) shape-memory effect in such nanocomposites can be achieved without application of external stress (freestanding), when the required orientation of the crystallizable actuation domains (ADs) can be ensured by an internal skeleton like structure formed by a second crystallizable phase determing the samples´s geometry, while magneto-sensitive iron oxide nanoparticles covalently integrated in the ADs allow remote temperature control. The polymer matrix of these composites should exhibit a phase-segregated morphology mainly composed of cyrstallizable ADs, whereby a second set of higher melting crystallites can take a skeleton like, geometry determining function (geometry determining domains, GDs) after programming of the composite and in this way the orientation of the ADs is established and maintained during actuation. The working principle for the reversible bidirectional movements in the multiphase shape-memory polymer network composite is related to a melting-induced contraction (MIC) during inductive heating and the crystallization induced elongation (CIE) of the oriented ADs during cooling. Finally, the amount of multivalent magnetosensitive netpoints in such a material should be as low as possible to ensure an adequate overall elasticity of the nanocomposite and at the same time a complete melting of both ADs and GDs via inductive heating, which is mandatory for enabling reprogrammability. At first, surface decorated iron oxide nanoparticles were synthesized and investigated. The coprecipitation method was applied to synthesize magnetic nanoparticles (mNPs) based on magnetite with size of 12±3 nm and in a next step a ring-opening polymerization (ROP) was utilized for covalent surface modification of such mNPs with oligo(ϵ-caprolactone) (OCL) or oligo(ω-pentadecalactone) (OPDL) via the "grafting from" approach. A successful coating of mNPs with OCL and OPDL was confirmed by differential scanning calorimetry (DSC) experiments showing melting peaks at 52±1 °C for mNP-OCL and 89±1 °C for mNP-OPDL. It was further explored whether two-layered surface decorated mNPs, can be prepared via a second surface-initiated ROP of mNP-OCL or mNP-OPDL with ω-pentadecalactone or ϵ-caprolactone. The observation of two distinct melting transitions in DSC experiments as well as the increase in molecular weight of the detached coatings determined by GPC and 1H-NMR indicated a successful synthesis of the twolayered nanoparticles mNP-OCL-OPDL and mNP-OPDL-OCL. In contrast TEM micrographs revealed a reduction of the thickness of the polymeric coating on the nanoparticles after the second ROP, indicating that the applied synthesis and purification required further optimization. For evaluating the impact of the dispersion of mNPs within a polymer matrix on the resulting inductive heating capability of composites, plain mNPs as well as OCL coated magnetite nanoparticles (mNP-OCLs) were physically incorporated into crosslinked poly(ε-caprolactone) (PCL) networks. Inductive heating experiments were performed with both networks cPCL/mNP and cPCL/mNP-OCL in an alternating magnetic field (AMF) with a magnetic field strength of H = 30 kA·m-1. Here a bulk temperature of Tbulk = 74±2 °C was achieved for cPCL/mNP-OCL, which was almost 20 °C higher than the melting transition of the PCL-based polymer matrix. In contrast, the composite with plain mNPs could only reach a Tbulk of 48±2 °C, which is not sufficient for a complete melting of all PCL crystallites as required for actuation. The inductive heating capability of a multiphase copolymer nanocomposite network (designed as soft actuators) containing surface decorated mNPs as covalent netpoints was investigated. Such composite was synthesized from star-shaped OCL and OPDL precursors, as well as mNP-OCLs via reaction with HDI. The weight ratio of OPDL and OCL in the starting reaction mixture was 15/85 (wt\%/wt\%) and the amount of iron oxide in the nanocomposite was 4 wt\%. DSC experiments revealed two well separated melting and crystallization peaks confirming the required phase-segregated morphology in the nanocomposite NC-mNP-OCL. TEM images could illustrate a phase-segregated morphology of the polymer matrix on the microlevel with droplet shaped regions attributed to the OPDL domains dispersed in an OCL matrix. The TEM images could further demonstrate that the nanoparticulate netpoints in NC-mNP-OCL were almost homogeneously dispersed within the OCL domains. The tests of the inductive heating capability of the nanocomposites at a magnetic field strength of Hhigh = 11.2 kA·m-1 revealed a achievable plateau surface temperature of Tsurf = 57±1 °C for NC-mNP-OCL recorded by an infrared video camera. An effective heat generation constant (̅P) can be derived from a multi-scale model for the heat generation, which is proportional to the rate of heat generation per unit volume of the sample. NC-mNP-OCL with homogeneously dispersed mNP-OCLs exhibited a ̅P value of 1.04±0.01 K·s- 1 at Hhigh, while at Hreset = 30.0 kA·m-1 a Tsurf of 88±1 °C (where all OPDL related crystallite are molten) and a ̅P value of 1.93±0.02 K·s-1 was obtained indicating a high magnetic heating capability of the composite. The free-standing magnetically-controlled reversible shape-memory effect (mrSME) was explored with originally straight nanocomposite samples programmed by bending to an angle of 180°. By switching the magnetic field on and off the composite sample was allowed to repetitively heat to 60 °C and cool to the ambient temperature. A pronounced mrSME, characterized by changes in bending angle of Δϐrev = 20±3° could be obtained for a composite sample programmed by bending when a magnetic field strength of Hhigh = 11.2 kA·m-1 was applied in a multi-cyclic magnetic bending experiment with 600 heating-cooling cycles it could be shown that the actuation performance did not change with increasing number of test cycles, demonstrating the accuracy and reproducibility of this soft actuator. The degree of actuation as well as the kinetics of the shape changes during heating could be tuned by variation of the magnetic filed strength between Hlow and Hhigh or the magnetic field exposure time. When Hreset = 30.0 kA·m-1 was applied the programmed geometry was erased and the composite sample returned to it´s originally straight shape. The reprogrammability of the nanocomposite actuators was demonstrated by one and the same test specimen first exhibiting reversible angle changes when programmed by bending, secondly reprogrammed to a concertina, which expands upon inductive heating and contracts during cooling and finally reprogrammed to a clip like shape, which closes during cooling and opens when Hhigh was applied. In a next step the applicability of the presented remote controllable shape-memory polymer actuators was demonstrated by repetitive opening and closing of a multiring device prepared from NC-mNP-OCL, which repetitively opens and closes when a alternating magnetic field (Hhigh = 11.2 kA·m-1) was switched on and off. For investigation of the micro- and nanostructural changes related to the actuation of the developed nanocomposite, AFM and WAXS experiments were conducted with programmed nanocomposite samples under cyclic heating and cooling between 25 °C and 60 °C. In AFM experiments the change in the distance (D) between representative droplet-like structures related to the OPDL geometry determining domains was used to calculate the reversible change in D. Here Drev = 3.5±1\% was found for NC-mNP-OCL which was in good agreement with the results of the magneto-mechanical actuation experiments. Finally, the analysis of azimuthal (radial) WAXS scattering profiles could support the oriented crystallization of the OCL actuation domains at 25 °C. In conclusion, the results of this work successfully demonstrated that shape-memory polymer nanocomposites, containing mNPs as magneto-sensitive multifunctional netpoints in a covalently crosslinked multiphase polymer matrix, exhibit magnetically (remotely) controlled actuations upon repetitive exposure to an alternating magnetic field. Furthermore, the (shape) memory of such a nanocomposite can be erased by exposing it to temperatures above the melting temperature of the geometry forming domains, which allows a reprogramming of the actuator. These findings would be relevant for designing novel reprogrammable remotely controllable soft polymeric actuators.}, language = {en} } @phdthesis{Walther2018, author = {Walther, Sebastian}, title = {Funktionalisierung von {\"O}ls{\"a}uremethylester und Alkydharzen f{\"u}r die photoinduzierte radikalische Polymerisation im UV Bereich}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421467}, school = {Universit{\"a}t Potsdam}, pages = {136}, year = {2018}, abstract = {Die vorliegende Arbeit behandelt die Synthese und Charakterisierung von funktionalisierten Alkydharzen und die photoinduzierte Polymerisation dieser unter Einsatz einer Quecksilberdampflampe oder einer UV LED mit unterschiedlicher Lichtintensit{\"a}t. Der Fokus dieser Arbeit bestand in der gezielten Substitution der internalen Doppelbindungen der Fetts{\"a}ureester durch reaktivere Gruppen, wie Acrylate oder Methacrylate, welche f{\"u}r Alkydharze in dieser Form so in der Literatur nicht beschrieben sind. Untersuchungen des Polymerisationsverhaltens dieser funktionalisierten Harze wurden mit der Photo DSC durchgef{\"u}hrt, wobei Bis - (4 - methoxybenzoyl) diethylgermanium als Photoinitiator diente. Die Ergebnisse haben gezeigt, dass die Harze radikalisch polymerisiert werden k{\"o}nnen und eine geringere Abh{\"a}ngigkeit von der Umgebungsatmosph{\"a}re (Luftsauerstoff bzw. Stickstoff) vorliegt. Dies ist so in der Literatur f{\"u}r funktionalisierte Alkydharze nicht bekannt. Abmischungen von unterschiedlichen Monomeren und funktionalisierten Harzen bewirkten eine Steigerung der Viskosit{\"a}t sowie eine Verringerung der Sauerstoffinhibierung im Zuge der photoinduzierten Polymerisation unter Luftsauerstoff f{\"u}r die Quecksilberdampflampe und der UV LED. Zur Untersuchung der sauerstoffinhibierenden Wirkung der Harze sind Synthesen unterschiedlicher, funktionalisierter {\"O}ls{\"a}uremethylester als Modellsubstanzen durchgef{\"u}hrt worden. Ein verbessertes Polymerisationsverhalten und eine geringe Abh{\"a}ngigkeit von der Umgebungsatmosph{\"a}re konnte f{\"u}r die Modelle nachgewiesen werden. Zur Aufkl{\"a}rung des verbesserten Polymerisationsverhaltens sind gezielt Substituenten (Imidazol, Brom, Alkohol, Acetat) in den funktionalisierten {\"O}ls{\"a}uremethylester eingebaut worden, um den Einfluss dieser aufzuzeigen. Im Rahmen dieser Synthesen sind neuartige Strukturen synthetisiert worden, welche so in der Literatur nicht beschrieben sind. Die Gegen{\"u}berstellung der Polymerisationszeit, der Umsatz der (Meth-)Acrylatgruppen sowie die Zeit zum Erreichen der maximalen Polymerisationsgeschwindigkeit unter Verwendung von unterschiedlichen UV Lichtquellen hat einen Einfluss der Substituenten auf das Polymerisationsverhalten gezeigt.}, language = {de} } @phdthesis{Vogel2018, author = {Vogel, Stefanie}, title = {Sequence dependency of photon and electron induced DNA strand breaks}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-419669}, school = {Universit{\"a}t Potsdam}, pages = {xii, 117}, year = {2018}, abstract = {Deoxyribonucleic acid (DNA) is the carrier of human genetic information and is exposed to environmental influences such as the ultraviolet (UV) fraction of sunlight every day. The photostability of the DNA against UV light is astonishing. Even if the DNA bases have a strong absorption maximum at around 260 nm/4.77 eV, their quantum yield of photoproducts remains very low 1. If the photon energies exceed the ionization energy (IE) of the nucleobases ( ̴ 8-9 eV) 2, the DNA can be severely damaged. Photoexcitation and -ionization reactions occur, which can induce strand breaks in the DNA. The efficiency of the excitation and ionization induced strand breaks in the target DNA sequences are represented by cross sections. If Si as a substrate material is used in the VUV irradiation experiments, secondary electrons with an energy below 3.6 eV are generated from the substrate. This low energy electrons (LEE) are known to induce dissociative electron attachment (DEA) in DNA and with it DNA strand breakage very efficiently. LEEs play an important role in cancer radiation therapy, since they are generated secondarily along the radiation track of ionizing radiation. In the framework of this thesis, different single stranded DNA sequences were irradiated with 8.44 eV vacuum UV (VUV) light and cross sections for single strand breaks (SSB) were determined. Several sequences were also exposed to secondary LEEs, which additionally contributed to the SSBs. First, the cross sections for SSBs depending on the type of nucleobases were determined. Both types of DNA sequences, mono-nucleobase and mixed sequences showed very similar results upon VUV radiation. The additional influence of secondarily generated LEEs resulted in contrast in a clear trend for the SSB cross sections. In this, the polythymine sequence had the highest cross section for SSBs, which can be explained by strong anionic resonances in this energy range. Furthermore, SSB cross sections were determined as a function of sequence length. This resulted in an increase in the strand breaks to the same extent as the increase in the geometrical cross section. The longest DNA sequence (20 nucleotides) investigated in this series, however, showed smaller cross section values for SSBs, which can be explained by conformational changes in the DNA. Moreover, several DNA sequences that included the radiosensitizers 5-Bromouracil (5BrU) and 8-Bromoadenine (8BrA) were investigated and the corresponding SSB cross sections were determined. It was shown that 5BrU reacts very strongly to VUV radiation leading to high strand break yields, which showed in turn a strong sequence-dependency. 8BrA, on the other hand, showed no sensitization to the applied VUV radiation, since almost no increase in strand breakage yield was observed in comparison to non-modified DNA sequences. In order to be able to identify the mechanisms of radiation damage by photons, the IEs of certain DNA sequences were further explored using photoionization tandem mass spectrometry. By varying the DNA sequence, both the IEs depending on the type of nucleobase as well as on the DNA strand length could be identified and correlated to the SSB cross sections. The influence of the IE on the photoinduced reaction in the brominated DNA sequences could be excluded.}, language = {en} } @article{VishnevetskayaHildebrandDyakonovaetal.2018, author = {Vishnevetskaya, Natalya S. and Hildebrand, Viet and Dyakonova, Margarita A. and Niebuur, Bart-Jan and Kyriakos, Konstantinos and Raftopoulos, Konstantinos N. and Di, Zhenyu and M{\"u}ller-Buschbaum, Peter and Laschewsky, Andre and Papadakis, Christine M.}, title = {Dual orthogonal switching of the "Schizophrenic" self-assembly of diblock copolymers}, series = {Macromolecules : a publication of the American Chemical Society}, volume = {51}, journal = {Macromolecules : a publication of the American Chemical Society}, number = {7}, publisher = {American Chemical Society}, address = {Washington}, issn = {0024-9297}, doi = {10.1021/acs.macromol.8b00096}, pages = {2604 -- 2614}, year = {2018}, abstract = {Based on diblock copolymers, a pair of "schizophrenic" micellar systems is designed by combining a nonionic and thermoresponsive block with a zwitterionic block, which is thermoresponsive and salt-sensitive. The nonionic block is poly(N-isopropylacrylamide) (PNIPAM) or poly(N-isopropylmethacrylamide) (PNIPMAM) and exhibits a lower critical solution temperature (LCST) behavior in aqueous solution. The zwitterionic block is a polysulfobetaine, i.e., poly(4((3-methacrylamidopropyl)dimethylammonio)butane-1-sulfonate) (PSBP), and has an upper critical solution temperature (UCST) behavior with the clearing point decreasing with increasing salt concentration. The PSBP-b-PNIPAM and PSBP-b-PNIPMAM diblock copolymers are prepared by successive reversible addition-fragmentation chain transfer (RAFT) polymerizations. The PSBP block is chosen such that the clearing point of the homopolymer is significantly higher in pure water than the cloud point of PNIPAM or PNIPMAM. Using turbidimetry, H-1 NMR, and small-angle neutron scattering, we investigate the overall phase behavior as well as the structure and interaction between the micelles and the intermediate phase, both in salt-free D2O and in 0.004 M NaBr in D2O in a wide temperature range. We find that PSBP-b-PNIPAM at 50 g L-1 in salt-free D2O is turbid in the entire temperature range. It forms spherical micelles below the cloud point of PNIPAM and cylindrical micelles above. Similar behavior is observed for PSBP-b-PNIPMAM at 50 g L-1 in salt-free D2O with a slight and smooth increase of the light transmission below the cloud point of PNIPMAM and an abrupt decrease above. Upon addition of 0.004 M NaBr, the UCST-type cloud point of the PSBP-block is notably decreased, and an intermediate regime is encountered below the cloud point of PNIPMAM, where the light transmission is slightly enhanced. In this regime, the polymer solution exhibits behavior typical for polyelectrolyte solutions. Thus, double thermosensitive and salt-sensitive behavior with "schizophrenic" micelle formation is found, and the width of the intermediate regime, where both blocks are hydrophilic, can be tuned by the addition of electrolyte.}, language = {en} } @phdthesis{VillatoroLeal2018, author = {Villatoro Leal, Jos{\´e} Andr{\´e}s}, title = {A combined approach for the analysis of biomolecules using IR-MALDI ion mobility spectrometry and molecular dynamics simulations of peptide ions in the gas phase}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-419723}, school = {Universit{\"a}t Potsdam}, pages = {133}, year = {2018}, abstract = {The aim of this doctoral thesis was to establish a technique for the analysis of biomolecules with infrared matrix-assisted laser dispersion (IR-MALDI) ion mobility (IM) spectrometry. The main components of the work were the characterization of the IR-MALDI process, the development and characterization of different ion mobility spectrometers, the use of IR-MALDI-IM spectrometry as a robust, standalone spectrometer and the development of a collision cross-section estimation approach for peptides based on molecular dynamics and thermodynamic reweighting. First, the IR-MALDI source was studied with atmospheric pressure ion mobility spectrometry and shadowgraphy. It consisted of a metal capillary, at the tip of which a self-renewing droplet of analyte solution was met by an IR laser beam. A relationship between peak shape, ion desolvation, diffusion and extraction pulse delay time (pulse delay) was established. First order desolvation kinetics were observed and related to peak broadening by diffusion, both influenced by the pulse delay. The transport mechanisms in IR-MALDI were then studied by relating different laser impact positions on the droplet surface to the corresponding ion mobility spectra. Two different transport mechanisms were determined: phase explosion due to the laser pulse and electrical transport due to delayed ion extraction. The velocity of the ions stemming from the phase explosion was then measured by ion mobility and shadowgraphy at different time scales and distances from the source capillary, showing an initially very high but rapidly decaying velocity. Finally, the anatomy of the dispersion plume was observed in detail with shadowgraphy and general conclusions over the process were drawn. Understanding the IR-MALDI process enabled the optimization of the different IM spectrometers at atmospheric and reduced pressure (AP and RP, respectively). At reduced pressure, both an AP and an RP IR-MALDI source were used. The influence of the pulsed ion extraction parameters (pulse delay, width and amplitude) on peak shape, resolution and area was systematically studied in both AP and RP IM spectrometers and discussed in the context of the IR-MALDI process. Under RP conditions, the influence of the closing field and of the pressure was also examined for both AP and RP sources. For the AP ionization RP IM spectrometer, the influence of the inlet field (IF) in the source region was also examined. All of these studies led to the determination of the optimal analytical parameters as well as to a better understanding of the initial ion cloud anatomy. The analytical performance of the spectrometer was then studied. Limits of detection (LOD) and linear ranges were determined under static and pulsed ion injection conditions and interpreted in the context of the IR-MALDI mechanism. Applications in the separation of simple mixtures were also illustrated, demonstrating good isomer separation capabilities and the advantages of singly charged peaks. The possibility to couple high performance liquid chromatography (HPLC) to IR-MALDI-IM spectrometry was also demonstrated. Finally, the reduced pressure spectrometer was used to study the effect of high reduced field strength on the mobility of polyatomic ions in polyatomic gases. The last focus point was on the study of peptide ions. A dataset obtained with electrospray IM spectrometry was characterized and used for the calibration of a collision cross-section (CCS) determination method based on molecular dynamics (MD) simulations at high temperature. Instead of producing candidate structures which are evaluated one by one, this semi-automated method uses the simulation as a whole to determine a single average collision cross-section value by reweighting the CCS of a few representative structures. The method was compared to the intrinsic size parameter (ISP) method and to experimental results. Additional MD data obtained from the simulations was also used to further analyze the peptides and understand the experimental results, an advantage with regard to the ISP method. Finally, the CCS of peptide ions analyzed by IR-MALDI were also evaluated with both ISP and MD methods and the results compared to experiment, resulting in a first validation of the MD method. Thus, this thesis brings together the soft ionization technique that is IR-MALDI, which produces mostly singly charged peaks, with ion mobility spectrometry, which can distinguish between isomers, and a collision cross-section determination method which also provides structural information on the analyte at hand.}, language = {en} } @article{VacogneWeiTaueretal.2018, author = {Vacogne, Charlotte Dominique and Wei, Chunxiang and Tauer, Klaus and Schlaad, Helmut}, title = {Self-assembly of alpha-helical polypeptides into microscopic and enantiomorphic spirals}, series = {Journal of the american chemical society}, volume = {140}, journal = {Journal of the american chemical society}, number = {36}, publisher = {American Chemical Society}, address = {Washington}, issn = {0002-7863}, doi = {10.1021/jacs.8b06503}, pages = {11387 -- 11394}, year = {2018}, abstract = {Helical structures are ubiquitous in biological materials and often serve a structural purpose. Bioinspired helical materials can be challenging to synthesize and rarely reach the degree of hierarchy of their natural counterparts. Here we report the first example of particles synthesized by direct emulsification of polypeptides found to display spiral morphologies in the dry state. The polypeptides were alpha-helical homo- and copolypeptides of gamma-benzyl glutamate and allylglycine. The chirality of the spirals was controlled by the chirality of the alpha-helices. Notably, right-handed alpha-helical polypeptides (rich in 1, residues) produced clockwise spirals, whereas left-handed alpha-helical polypeptides (rich in D residues) produced the enantiomorphs, i.e., counterclockwise spirals. The disruption of the alpha-helical conformation by the introduction of chiral defects led to less regular spirals and in some cases their suppression. A hypothesis for the transmission of helicity and chirality from a molecular to a higher hierarchical level, involving fibril bundling of coiled alpha-helices, is proposed.}, language = {en} } @article{UtechtGaebelKlamroth2018, author = {Utecht, Manuel Martin and Gaebel, Tina and Klamroth, Tillmann}, title = {Desorption induced by low energy charge carriers on Si(111)-7 x 7}, series = {Journal of computational chemistry : organic, inorganic, physical, biological}, volume = {39}, journal = {Journal of computational chemistry : organic, inorganic, physical, biological}, number = {30}, publisher = {Wiley}, address = {Hoboken}, issn = {0192-8651}, doi = {10.1002/jcc.25607}, pages = {2517 -- 2525}, year = {2018}, abstract = {We use clusters for the modeling of local ion resonances caused by low energy charge carriers in STM-induced desorption of benzene derivates from Si(111)-7 x 7. We perform Born-Oppenheimer molecular dynamics for the charged systems assuming vertical transitions to the charged states at zero temperature, to rationalize the low temperature activation energies, which are found in experiment for chlorobenzene. Our calculations suggest very similar low temperature activation energies for toluene and benzene. For the cationic resonance transitions to physisorption are found even at 0 K, while the anion remains chemisorbed during the propagations. Further, we also extend our previous static quantum chemical investigations to toluene and benzene. In addition, an in depth analysis of the ionization potentials and electron affinities, which are used to estimate resonance energies, is given.}, language = {en} } @article{UchidaBinetAroraetal.2018, author = {Uchida, Ryusuke and Binet, Silvia and Arora, Neha and Jacopin, Gwenole and Alotaibi, Mohammad Hayal and Taubert, Andreas and Zakeeruddin, Shaik Mohammed and Dar, M. Ibrahim and Graetzel, Michael}, title = {Insights about the Absence of Rb Cation from the 3D Perovskite Lattice}, series = {Small}, volume = {14}, journal = {Small}, number = {36}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1613-6810}, doi = {10.1002/smll.201802033}, pages = {7}, year = {2018}, abstract = {Efficiencies >20\% are obtained from the perovskite solar cells (PSCs) employing Cs+ and Rb+ based perovskite compositions; therefore, it is important to understand the effect of these inorganic cations specifically Rb+ on the properties of perovskite structures. Here the influence of Cs+ and Rb+ is elucidated on the structural, morphological, and photophysical properties of perovskite structures and the photovoltaic performances of resulting PSCs. Structural, photoluminescence (PL), and external quantum efficiency studies establish the incorporation of Cs+ (x < 10\%) but amply rule out the possibility of Rb-incorporation into the MAPbI(3) (MA = CH3NH3+) lattice. Moreover, morphological studies and time-resolved PL show that both Cs+ and Rb+ detrimentally affect the surface coverage of MAPbI(3) layers and charge-carrier dynamics, respectively, by influencing nucleation density and by inducing nonradiative recombination. In addition, differential scanning calorimetry shows that the transition from orthorhombic to tetragonal phase occurring around 160 K requires more thermal energy for the Cs-containing MAPbI(3) systems compared to the pristine MAPbI(3). Investigation including mixed halide (I/Br) and mixed cation A-cation based compositions further confirms the absence of Rb+ from the 3D-perovskite lattice. The fundamental insights gained through this work will be of great significance to further understand highly promising perovskite compositions.}, language = {en} } @article{TurriniKroepflJensenetal.2018, author = {Turrini, Nikolaus G. and Kroepfl, Nina and Jensen, Kenneth Bendix and Reiter, Tamara C. and Francesconi, Kevin A. and Schwerdtle, Tanja and Kroutil, Wolfgang and Kuehnelt, Doris}, title = {Biosynthesis and isolation of selenoneine from genetically modified fission yeast}, series = {Metallomics : integrated biometal science}, volume = {10}, journal = {Metallomics : integrated biometal science}, number = {10}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1756-5901}, doi = {10.1039/c8mt00200b}, pages = {1532 -- 1538}, year = {2018}, abstract = {Selenoneine, a naturally occurring form of selenium, is the selenium analogue of ergothioneine, a sulfur species with health relevance not only as a purported antioxidant but likely also beyond. Selenoneine has been speculated to exhibit similar effects. To study selenoneine's health properties as well as its metabolic transformation, the pure compound is required. Chemical synthesis of selenoneine, however, is challenging and biosynthetic approaches have been sought. We herein report the biosynthesis and isolation of selenoneine from genetically modified fission yeast Schizosaccharomyces pombe grown in a medium containing sodium selenate. After cell lysis and extraction with methanol, selenoneine was purified by three consecutive preparative reversed-phase HPLC steps. The product obtained at the mg level was characterised by high resolution mass spectrometry, NMR and HPLC/ICPMS. Biosynthesis was found to be a promising alternative to chemical synthesis, and should be suitable for upscaling to produce higher amounts of this important selenium species in the future.}, language = {en} } @article{TuncaboyluFriessWischkeetal.2018, author = {Tuncaboylu, Deniz Ceylan and Friess, Fabian and Wischke, Christian and Lendlein, Andreas}, title = {A multifunctional multimaterial system for on-demand protein release}, series = {Journal of controlled release}, volume = {284}, journal = {Journal of controlled release}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0168-3659}, doi = {10.1016/j.jconrel.2018.06.022}, pages = {240 -- 247}, year = {2018}, abstract = {In order to provide best control of the regeneration process for each individual patient, the release of protein drugs administered during surgery may need to be timely adapted and/or delayed according to the progress of healing/regeneration. This study aims to establish a multifunctional implant system for a local on-demand release, which is applicable for various types of proteins. It was hypothesized that a tubular multimaterial container kit, which hosts the protein of interest as a solution or gel formulation, would enable on-demand release if equipped with the capacity of diameter reduction upon external stimulation. Using devices from poly(epsilon-caprolactone) networks, it could be demonstrated that a shape-memory effect activated by heat or NIR light enabled on-demand tube shrinkage. The decrease of diameter of these shape-memory tubes (SMT) allowed expelling the payload as demonstrated for several proteins including SDF-1 alpha, a therapeutically relevant chemotactic protein, to achieve e.g. continuous release with a triggered add-on dosing (open tube) or an on-demand onset of bolus or sustained release (sealed tube). Considering the clinical relevance of protein factors in (stem) cell attraction to lesions and the progress in monitoring biomarkers in body fluids, such on-demand release systems may be further explored e.g. in heart, nerve, or bone regeneration in the future.}, language = {en} } @phdthesis{TroegerMueller2018, author = {Tr{\"o}ger-M{\"u}ller, Steffen}, title = {Truly sustainable imidazolium ionics}, school = {Universit{\"a}t Potsdam}, pages = {158}, year = {2018}, language = {de} } @article{TianHuZhangetal.2018, author = {Tian, Guang-Zong and Hu, Jing and Zhang, Heng-Xi and Rademacher, Christoph and Zou, Xiao-Peng and Zheng, Hong-Ning and Xu, Fei and Wang, Xiao-Li and Linker, Torsten and Yin, Jian}, title = {Synthesis and conformational analysis of linear homo- and heterooligomers from novel 2-C-branched sugar amino acids (SAAs)}, series = {Scientific reports}, volume = {8}, journal = {Scientific reports}, publisher = {Nature Publ. Group}, address = {London}, issn = {2045-2322}, doi = {10.1038/s41598-018-24927-6}, pages = {8}, year = {2018}, abstract = {Sugar amino acids (SAAs), as biologically interesting structures bearing both amino and carboxylic acid functional groups represent an important class of multifunctional building blocks. In this study, we develop an easy access to novel SAAs in only three steps starting from nitro compounds in high yields in analytically pure form, easily available by ceric (IV) mediated radical additions. Such novel SAAs have been applied in the assembly of total nine carbopeptoids with the form of linear homo-and heterooligomers for the structural investigations employing circular dichroism (CD) spectroscopy, which suggest that the carbopeptoids emerge a well-extended, left (or right)-handed conformation similar to polyproline II (PPII) helices. NMR studies also clearly demonstrated the presence of ordered secondary structural elements. 2D-ROESY spectra were acquired to identify i+1NH <-> (C1H)-C-i, (C2H)-C-i correlations which support the conformational analysis of tetramers by CD spectroscopy. These findings provide interesting information of SAAs and their oligomers as potential scaffolds for discovering new drugs and materials.}, language = {en} } @article{TanLiuSiemensmeyeretal.2018, author = {Tan, Li and Liu, Bing and Siemensmeyer, Konrad and Glebe, Ulrich and B{\"o}ker, Alexander}, title = {Synthesis of thermo-responsive nanocomposites of superparamagnetic cobalt nanoparticlesipoly(N-isopropylacrylamide)}, series = {Journal of colloid and interface science}, volume = {526}, journal = {Journal of colloid and interface science}, publisher = {Elsevier}, address = {San Diego}, issn = {0021-9797}, doi = {10.1016/j.jcis.2018.04.074}, pages = {124 -- 134}, year = {2018}, abstract = {Novel nanocomposites of superparamagnetic cobalt nanoparticles (Co NPs) and poly(N-isopropylacrylamide) (PNIPAM) were fabricated through surface-initiated atom-transfer radical polymerization (SI-ATRP). We firstly synthesized a functional ATRP initiator, containing an amine (as anchoring group) and a 2-bromopropionate group (SI-ATRP initiator). Oleic acid- and trioctylphosphine oxide-coated Co NPs were then modified with the initiator via ligand exchange. The process is facile and rapid for efficient surface functionalization and afterwards the Co NPs can be dispersed into polar solvent DMF without aggregation. Transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and dynamic light scattering measurements confirmed the success of ligand exchange. The following polymerization of NIPAM was conducted on the surface of Co NPs. Temperature-dependent dynamic light scattering study showed the responsive behavior of PNIPAM-coated Co NPs. The combination of superparamagnetic and thermo-responsive properties in these hybrid nanoparticles is promising for future applications e.g. in biomedicine. (C) 2018 Elsevier Inc. All rights reserved.}, language = {en} } @article{TanLiuSiemensmeyeretal.2018, author = {Tan, Li and Liu, Bing and Siemensmeyer, Konrad and Glebe, Ulrich and B{\"o}ker, Alexander}, title = {Synthesis of Polystyrene-Coated Superparamagnetic and Ferromagnetic Cobalt Nanoparticles}, series = {Polymers}, volume = {10}, journal = {Polymers}, number = {10}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, doi = {10.3390/polym10101053}, pages = {18}, year = {2018}, abstract = {Polystyrene-coated cobalt nanoparticles (NPs) were synthesized through a dual-stage thermolysis of cobalt carbonyl (Co-2(CO)(8)). The amine end-functionalized polystyrene surfactants with varying molecular weight were prepared via atom-transfer radical polymerization technique. By changing the concentration of these polymeric surfactants, Co NPs with different size, size distribution, and magnetic properties were obtained. Transmission electron microscopy characterization showed that the size of Co NPs stabilized with lower molecular weight polystyrene surfactants (M-n = 2300 g/mol) varied from 12-22 nm, while the size of Co NPs coated with polystyrene of middle (M-n = 4500 g/mol) and higher molecular weight (M-n = 10,500 g/mol) showed little change around 20 nm. Magnetic measurements revealed that the small cobalt particles were superparamagnetic, while larger particles were ferromagnetic and self-assembled into 1-D chain structures. Thermogravimetric analysis revealed that the grafting density of polystyrene with lower molecular weight is high. To the best of our knowledge, this is the first study to obtain both superparamagnetic and ferromagnetic Co NPs by changing the molecular weight and concentration of polystyrene through the dual-stage decomposition method.}, language = {en} } @article{TanLiuGlebeetal.2018, author = {Tan, Li and Liu, Bing and Glebe, Ulrich and B{\"o}ker, Alexander}, title = {Magnetic Field-Induced Assembly of Superparamagnetic Cobalt Nanoparticles on Substrates and at Liquid-Air Interface}, series = {Langmuir}, volume = {34}, journal = {Langmuir}, number = {46}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.8b02673}, pages = {13993 -- 14002}, year = {2018}, abstract = {Superparamagnetic cobalt nanoparticles (Co NPs) are an interesting material for self-assembly processes because of their magnetic properties. We investigated the magnetic field-induced assembly of superparamagnetic cobalt nanoparticles and compared three different approaches, namely, the assembly on solid substrates, at water-air, and ethylene glycol-air interfaces. Oleic acid- and trioctylphosphine oxide-coated Co NPs were synthesized via a thermolysis of cobalt carbonyl and dispersed into either hexane or toluene. The Co NP dispersion was dropped onto different substrates (e.g., transmission electron microscopy (TEM) grid, silicon wafer) and onto liquid surfaces. Transmission electron microscopy (TEM), scanning force microscopy, optical microscopy, as well as scanning electron microscopy showed that superparamagnetic Co NPs assembled into one-dimensional chains in an external magnetic field. By varying the concentration of the Co NP dispersion (1-5 mg/mL) and the strength of the magnetic field (4-54 mT), the morphology of the chains changed. Short, thin, and flexible chain structures were obtained at low NP concentration and low strength of magnetic field, whereas they became long, thick and straight when the NP concentration and the magnetic field strength increased. In comparison, the assembly of Co NPs from hexane dispersion at ethylene glycol-air interface showed the most regular and homogeneous alignment, since a more efficient spreading could be achieved on ethylene glycol than on water and solid substrates.}, language = {en} } @phdthesis{Tan2018, author = {Tan, Li}, title = {Synthesis, assembly and thermo-responsivity of polymer-functionalized magnetic cobalt nanoparticles}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418153}, school = {Universit{\"a}t Potsdam}, pages = {X, 111}, year = {2018}, abstract = {This thesis mainly covers the synthesis, surface modification, magnetic-field-induced assembly and thermo-responsive functionalization of superparamagnetic Co NPs initially stabilized by hydrophobic small molecules oleic acid (OA) and trioctylphosphine oxide (TOPO), as well as the synthesis of both superparamagnetic and ferromagnetic Co NPs by using end-functionalized-polystyrene as stabilizer. Co NPs, due to their excellent magnetic and catalytic properties, have great potential application in various fields, such as ferrofluids, catalysis, and magnetic resonance imaging (MRI). Superparamagnetic Co NPs are especially interesting, since they exhibit zero coercivity. They get magnetized in an external magnetic field and reach their saturation magnetization rapidly, but no magnetic moment remains after removal of the applied magnetic field. Therefore, they do not agglomerate in the body when they are used in biomedical applications. Normally, decomposition of metallic precursors at high temperature is one of the most important methods in preparation of monodisperse magnetic NPs, providing tunability in size and shape. Hydrophobic ligands like OA, TOPO and oleylamine are often used to both control the growth of NPs and protect them from agglomeration. The as-prepared magnetic NPs can be used in biological applications as long as they are transferred into water. Moreover, their supercrystal assemblies have the potential for high density data storage and electronic devices. In addition to small molecules, polymers can also be used as surfactants for the synthesis of ferromagnetic and superparamagnetic NPs by changing the reaction conditions. Therefore, chapter 2 gives an overview on the basic concept of synthesis, surface modification and self-assembly of magnetic nanoparticles. Various examples were used to illustrate the recent work. The hydrophobic Co NPs synthesized with small molecules as surfactants limit their biological applications, which require a hydrophilic or aqueous environment. Surface modification (e.g., ligand exchange) is a general idea for either phase transition or surface-functionalization. Therefore, in chapter 3, a ligand exchange process was conducted to functionalize the surface of Co NPs. PNIPAM is one of the most popular smart polymers and its lower critical solution temperature (LCST) is around 32 °C, with a reversible change in the conformation structure between hydrophobic and hydrophilic. The novel nanocomposites of superparamagnetic Co NPs and thermo-responsive PNIPAM are of great interest. Thus, well-defined superparamagnetic Co NPs were firstly synthesized through the thermolysis of cobalt carbonyl by using OA and TOPO as surfactants. A functional ATRP initiator, containing an amine (as anchoring group) and a 2-bromopropionate group (SI-ATRP initiator), was used to replace the original ligands. This process is rapid and facial for efficient surface functionalization and afterwards the Co NPs can be dispersed into polar solvent DMF without aggregation. FT-IR spectroscopy showed that the TOPO was completely replaced, but a small amount of OA remained on the surface. A TGA measurement allowed the calculation of the grafting density of the initiator as around 3.2 initiator/nm2. Then, the surface-initiated ATRP was conducted for the polymerization of NIPAM on the surface of Co NPs and rendered the nanocomposites water-dispersible. A temperature-dependent dynamic light scattering study showed the aggregation behavior of PNIPAM-coated Co NPs upon heating and this process was proven to be reversible. The combination of superparamagnetic and thermo-responsive properties in these hybrid nanoparticles is promising for future applications e.g. in biomedicine. In chapter 4, the magnetic-field-induced assembly of superparamagnetic cobalt nanoparticles both on solid substrates and at liquid-air interface was investigated. OA- and TOPO-coated Co NPs were synthesized via the thermolysis of cobalt carbonyl and dispersed into either hexane or toluene. The Co NP dispersion was dropped onto substrates (e.g., TEM grid, silicon wafer) and at liquid-air (water-air or ethylene glycol-air) interface. Due to the attractive dipolar interaction, 1-D chains formed in the presence of an external magnetic field. It is known that the concentration and the strength of the magnetic field can affect the assembly behavior of superparamagnetic Co NPs. Therefore, the influence of these two parameters on the morphology of the assemblies was studied. The formed 1-D chains were shorter and flexible at either lower concentration of the Co NP dispersion or lower strength of the external magnetic field due to thermal fluctuation. However, by increasing either the concentration of the NP dispersion or the strength of the applied magnetic field, these chains became longer, thicker and straighter. The reason could be that a high concentration led to a high fraction of short dipolar chains, and their interaction resulted in longer and thicker chains under applied magnetic field. On the other hand, when the magnetic field increased, the induced moments of the magnetic nanoparticles became larger, which dominated over the thermal fluctuation. Thus, the formed short chains connected to each other and grew in length. Thicker chains were also observed through chain-chain interaction. Furthermore, the induced moments of the NPs tended to direct into one direction with increased magnetic field, thus the chains were straighter. In comparison between the assembly on substrates, at water-air interface and at ethylene glycol-air interface, the assembly of Co NPs in hexane dispersion at ethylene glycol-air interface showed the most regular and homogeneous chain structures due to the better spreading of the dispersion on ethylene glycol subphase than on water subphase and substrates. The magnetic-field-induced assembly of superparamagnetic nanoparticles could provide a powerful approach for applications in data storage and electronic devices. Chapter 5 presented the synthesis of superparamagnetic and ferromagnetic cobalt nanoparticles through a dual-stage thermolysis of cobalt carbonyl (Co2(CO)8) by using polystyrene as surfactant. The amine end-functionalized polystyrene surfactants with different molecular weight were prepared via atom transfer radical polymerization technique. The molecular weight determination of polystyrene was conducted by gel permeation chromatography (GPC) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry techniques. The results showed that, when the molecular weight distribution is low (Mw/Mn < 1.2), the measurement by GPC and MALDI-ToF MS provided nearly similar results. For example, the molecular weight of 10600 Da was obtained by MALDI-ToF MS, while GPC gave 10500 g/mol (Mw/Mn = 1.17). However, if the polymer is poly distributed, MALDI-ToF MS cannot provide an accurate value. This was exemplified for a polymer with a molecular weight of 3130 Da measured by MALDI-TOF MS, while GPC showed 2300 g/mol (Mw/Mn = 1.38). The size, size distribution and magnetic properties of the hybrid particles were different by changing either the molecular weight or concentration of the polymer surfactants. The analysis from TEM characterization showed that the size of cobalt nanoparticles stabilized with polystyrene of lower molecular weight (Mn = 2300 g/mol) varied from 12-22 nm, while the size with middle (Mn = 4500 g/mol) and higher molecular weight (Mn = 10500 g/mol) of polystyrene-coated cobalt nanoparticles showed little change. Magnetic measurements exhibited that the small cobalt particles (12 nm) were superparamagnetic, while larger particles (21 nm) were ferromagnetic and assembled into 1-D chains. The grafting density calculated from thermogravimetric analysis showed that a higher grafting density of polystyrene was obtained with lower molecular weight (Mn = 2300 g/mol) than those with higher molecular weight (Mn = 10500 g/mol). Due to the larger steric hindrance, polystyrene with higher molecular weight cannot form a dense shell on the surface of the nanoparticles, which resulted in a lower grafting density. Wide angle X-ray scattering measurements revealed the epsilon cobalt crystalline phases of both superparamagnetic Co NPs coated with polystyrene (Mn = 2300 g/mol) and ferromagnetic Co NPs coated with polystyrene (Mn = 10500 g/mol). Furthermore, a stability study showed that PS-Co NPs prepared with higher polymer concentration and polymer molecular weight exhibited a better stability.}, language = {en} } @article{TadjoungWaffoYesildagCasertaetal.2018, author = {Tadjoung Waffo, Armel Franklin and Yesildag, Cigdem and Caserta, Giorgio and Katz, Sagie and Zebger, Ingo and Lensen, Marga C. and Wollenberger, Ulla and Scheller, Frieder W. and Altintas, Zeynep}, title = {Fully electrochemical MIP sensor for artemisinin}, series = {Sensors and actuators : B, Chemical}, volume = {275}, journal = {Sensors and actuators : B, Chemical}, publisher = {Elsevier}, address = {Lausanne}, issn = {0925-4005}, doi = {10.1016/j.snb.2018.08.018}, pages = {163 -- 173}, year = {2018}, abstract = {This study aims to develop a rapid, sensitive and cost-effective biomimetic electrochemical sensor for artemisinin determination in plant extracts and for pharmacokinetic studies. A novel molecularly imprinted polymer (MIP)based electrochemical sensor was developed by electropolymerization of o-phenylenediamine (o-PD) in the presence of artemisinin on gold wire surface for sensitive detection of artemisinin. The experimental parameters, including selection of functional monomer, polymerization conditions, template extraction after polymerization, influence of pH and buffer were all optimized. Every step of imprinted film synthesis were evaluated by employing voltammetry techniques, surface-enhanced infrared absorption spectroscopy (SEIRAS) and atomic force microscopy (AFM). The specificity was further evaluated by investigating non-specific artemisinin binding on non-imprinted polymer (NIP) surfaces and an imprinting factor of 6.8 was achieved. The artemisinin imprinted polymers using o-PD as functional monomer have provided highly stable and effective binding cavities for artemisinin. Cross-reactivity studies with drug molecules showed that the MIPs are highly specific for artemisinin. The influence of matrix effect was further investigated both in artificial plant matrix and diluted human serum. The results revealed a high affinity of artemisinin-MIP with dissociation constant of 7.3 x 10(-9) M and with a detection limit of 0.01 mu M and 0.02 mu M in buffer and plant matrix, respectively.}, language = {en} } @article{SunGlebeCharanetal.2018, author = {Sun, Zhiyong and Glebe, Ulrich and Charan, Himanshu and B{\"o}ker, Alexander and Wu, Changzhu}, title = {Enzyme-Polymer Conjugates as Robust Pickering Interfacial Biocatalysts for Efficient Biotransformations and One-Pot Cascade Reactions}, series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition}, volume = {57}, journal = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition}, number = {42}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1433-7851}, doi = {10.1002/anie.201806049}, pages = {13810 -- 13814}, year = {2018}, abstract = {Despite the rapid development of Pickering interfacial catalysis (PIC) at liquid-liquid interfaces with chemocatalysts, the use of unstable biocatalysts at emulsion interfaces remains a technical challenge. Herein, we present a Pickering interfacial biocatalysis (PIB) platform based on robust and recyclable enzyme-polymer conjugates that act as both catalytic sites and stabilizers at the interface of Pickering emulsions. The conjugates were prepared by growing poly(N-isopropylacrylamide) on a fragile enzyme, benzaldehyde lyase, under physiological conditions. The mild in situ conjugation process preserved the enzyme structure, and the conjugates were used to emulsify a water-organic two-phase system into a stable Pickering emulsion, leading to a significantly larger interfacial area and a 270-fold improvement in catalytic performance as compared to the unemulsified two-phase system. The PIB system could be reused multiple times. Conjugates of other enzymes were also fabricated and applied for cascade reactions.}, language = {en} } @article{SunOsenbergDongetal.2018, author = {Sun, Fu and Osenberg, Markus and Dong, Kang and Zhou, Dong and Hilger, Andre and Jafta, Charl J. and Risse, Sebastian and Lu, Yan and Markoetter, Henning and Manke, Ingo}, title = {Correlating Morphological Evolution of Li Electrodes with Degrading Electrochemical Performance of Li/LiCoO2 and Li/S Battery Systems}, series = {ACS energy letters / American Chemical Society}, volume = {3}, journal = {ACS energy letters / American Chemical Society}, number = {2}, publisher = {American Chemical Society}, address = {Washington}, issn = {2380-8195}, doi = {10.1021/acsenergylett.7b01254}, pages = {356 -- 365}, year = {2018}, abstract = {Efficient Li utilization is generally considered to be a prerequisite for developing next-generation energy storage systems (ESSs). However, uncontrolled growth of Li microstructures (LmSs) during electrochemical cycling has prevented its practical commercialization. Herein, we attempt to understand the correlation of morphological evolution of Li electrodes with degrading electrochemical performances of Li/LiCoO2 and Li/S systems by synchrotron X-ray phase contrast tomography technique. It was found that the continuous transformation of the initial dense Li bulk to a porous lithium interface (PL1) structure intimately correlates with the gradually degrading overall cell performance of these two systems. Additionally, the formation mechanism of the PLI and its correlation with previously reported inwardly growing LmS and the lithium-reacted region have been intensively discussed. The information that we gain herein is complementary to previous investigations and may provide general insights into understanding of degradation mechanisms of Li metal anodes and also provide highly needed guidelines for effective design of reliable next-generation Li metal-based ESSs.}, language = {en} } @article{SunDongOsenbergetal.2018, author = {Sun, Fu and Dong, Kang and Osenberg, Markus and Hilger, Andre and Risse, Sebastian and Lu, Yan and Kamm, Paul H. and Klaus, Manuela and Markoetter, Henning and Garcia-Moreno, Francisco and Arlt, Tobias and Manke, Ingo}, title = {Visualizing the morphological and compositional evolution of the interface of InLi-anode|thio-LISION electrolyte in an all-solid-state Li-S cell by in operando synchrotron X-ray tomography and energy dispersive diffraction}, series = {Journal of materials chemistry : A, Materials for energy and sustainability}, volume = {6}, journal = {Journal of materials chemistry : A, Materials for energy and sustainability}, number = {45}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2050-7488}, doi = {10.1039/c8ta08821g}, pages = {22489 -- 22496}, year = {2018}, abstract = {Dynamic and direct visualization of interfacial evolution is helpful in gaining fundamental knowledge of all-solid-state-lithium battery working/degradation mechanisms and clarifying future research directions for constructing next-generation batteries. Herein, in situ and in operando synchrotron X-ray tomography and energy dispersive diffraction were simultaneously employed to record the morphological and compositional evolution of the interface of InLi-anode|sulfide-solid-electrolyte during battery cycling. Compelling morphological evidence of interfacial degradation during all-solid-state-lithium battery operation has been directly visualized by tomographic measurement. The accompanying energy dispersive diffraction results agree well with the observed morphological deterioration and the recorded electrochemical performance. It is concluded from the current investigation that a fundamental understanding of the phenomena occurring at the solid-solid electrode|electrolyte interface during all-solid-state-lithium battery cycling is critical for future progress in cell performance improvement and may determine its final commercial viability.}, language = {en} } @phdthesis{Strunk2018, author = {Strunk, David}, title = {Gewinnung phenolischer Komponenten aus dem Birkenstamm als Rohstoffquelle f{\"u}r die Synthese eines neuen substituierten Phenylmethacrylats und dessen Polymerisation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-409228}, school = {Universit{\"a}t Potsdam}, pages = {VIII, 157}, year = {2018}, abstract = {In der vorliegenden Arbeit werden Wege zur Gewinnung verschiedener phenolischer Substanzen wie Lignin, Diarylheptanoide und 4-(3-Oxobutyl)phenol (Himbeerketon) aus dem Stamm der H{\"a}ngebirke (Betula pendula) aufgezeigt. Durch Methacrylierung des 4-(3-Oxobutyl)phenols wurde ein Monomer erzeugt, welches mittels freier radikalischer Masse- und L{\"o}sungspolymerisation, sowie enzymatischer Polymerisation polymerisiert werden kann. Eine erste Isolierung von Bestandteilen wurde durch Extraktion von Innenholz bzw. Rinde mit Methanol erzielt. Die in Methanol unl{\"o}slichen Bestandteile des Innenholzes und der Rinde wurden anschließend mit ausgew{\"a}hlten ionischen Fl{\"u}ssigkeiten extrahiert. Es wurde ein Verfahren zum selektiven Trennen der mit diesen ionischen Fl{\"u}ssigkeiten extrahierten Bestandteile in Cellulose, Hemicellulose, Lignin und mit Ethylacetat extrahierbare Bestandteile entwickelt. Hierdurch war es m{\"o}glich, sowohl die verwendeten ionischen Fl{\"u}ssigkeiten als auch das Innenholz und die Rinde hinsichtlich ihres Extraktionsverhaltens miteinander zu vergleichen. Ferner wurden verschiedene Strategien aufgezeigt, um insgesamt drei Spezies an Diarylheptanoiden aus dem methanolischen Extrakt der Rinde zu isolieren. Eines der gefundenen Diarylheptanoide (5 Hydroxy-1,7-bis(4-hydroxyphenyl)-3-heptanon) wurde via Retroaldolreaktion in 4 (3 Oxobutyl)phenol (Himbeerketon) und 3 (4 Hydroxyphenyl)propanal gespalten. Es wurde die Verwendung des 4-(3-Oxobutyl)phenol als Monomerbestandteil untersucht. Hierf{\"u}r wurde 4-(3-Oxobutyl)phenylmethacrylat synthetisiert und Wege zur Reinigung mittels S{\"a}ulenchromatographie und Umkristallisation aufgezeigt. Anschließend wurde Poly(4-(3-oxobutyl)phenylmethacrylat) (PObMA) und Polybenzylmethacrylats (PBzMA) aus Massen- und L{\"o}sungspolymerisation hergestellt. Die Ausbeuten an PObpMA im Vergleich zum PBzMA liegen bei gleichen Reaktionsbedingungen auf gleichem Niveau. Im Kontrast hierzu ist der Polymerisationsgrad aus freier radikalischer Polymerisation in Masse des PObpMA im Vergleich zum PBzMA um den Faktor 3,7 gr{\"o}ßer. Die Glas{\"u}bergangstemperaturen des PObpMA liegen bei gleichen Reaktionsbedingungen sowohl bei freier radikalischer Polymerisation in Masse, als auch bei L{\"o}sungspolymerisation {\"u}ber denen des PBzMA. Dar{\"u}ber hinaus wurde die Polymerisation von 4-(3-Oxobutyl)phenylmethacrylat und Benzylmethacrylat mit einem Initiatorsystem bestehend aus Meerrettichperoxidase, Acetylaceton und Wasserstoffperoxid bei Raumtemperatur beschrieben. Die mit enzymatischem Initiatorsystem erzeugten Produkte zeigten starke {\"U}bereinstimmung mit Produkten aus L{\"o}sungspolymerisationen, welche mit Azobis(isobutyronitril) initiiert wurden.}, language = {de} } @article{StarkeKochKammeretal.2018, author = {Starke, Ines and Koch, Andreas and Kammer, Stefan and Holdt, Hans-J{\"u}rgen and M{\"o}ller, Heiko Michael}, title = {Electrospray mass spectrometry and molecular modeling study of formation and stability of silver complexes with diazaperylene and bisisoquinoline}, series = {Journal of mass spectrometry}, volume = {53}, journal = {Journal of mass spectrometry}, number = {5}, publisher = {Wiley}, address = {Hoboken}, issn = {1076-5174}, doi = {10.1002/jms.4071}, pages = {408 -- 418}, year = {2018}, abstract = {The complex formation of the following diazaperylene ligands (L) 1,12-diazaperylene 1, 1,1-bisisoquinoline 2, 2,11-disubstituted 1,12-diazaperylenes (alkyl=methyl, ethyl, isopropyl, 3, 5, 7), 3,3-disubstituted 1,1-bisisoquinoline (alkyl=methyl, ethyl, isopropyl, 4, 6, 8 and with R=phenyl, 11 and with pyridine 12), and the 5,8-dimethoxy-substituted diazaperylene 9, 6,6-dimethoxy-substituted bisisoquinoline 10 with AgBF4 was investigated. Collision-induced dissociation measurements were used to evaluate the relative stabilities of the ligands themselves and for the [1:1](+) complexes as well as for the homoleptic and heteroleptic silver [1:2](+) complexes in the gas phase. This method is very useful in rapid screening of the stabilities of new complexes in the gas phase. The influence of the spatial arrangement of the ligands and the type of substituents employed for the complexation were examined. The effect of the preorganization of the diazaperylene on the threshold activation voltages and thus of the relative binding energies of the different complexes are discussed. Density functional theory calculations were used to calculate the optimized structures of the silver complexes and compared with the stabilities of the complexes in the gas phase for the first time.}, language = {en} } @article{StanglmairNeubrechPacholski2018, author = {Stanglmair, Christoph and Neubrech, Frank and Pacholski, Claudia}, title = {Chemical routes to surface enhanced infrared absorption (SEIRA) substrates}, series = {Zeitschrift f{\"u}r physikalische Chemie : international journal of research in physical chemistry and chemical physics}, volume = {232}, journal = {Zeitschrift f{\"u}r physikalische Chemie : international journal of research in physical chemistry and chemical physics}, number = {9-11}, publisher = {De Gruyter}, address = {Berlin}, issn = {0942-9352}, doi = {10.1515/zpch-2018-1132}, pages = {1527 -- 1539}, year = {2018}, abstract = {Bottom-up strategies for fabricating SEIRA substrates are presented. For this purpose, wet-chemically prepared gold nanoparticles are coated with a polystyrene shell and subsequently self-assembled into different nanostructures such as quasi-hexagonally ordered gold nanoparticle monolayers, double layers, and honeycomb structures. Furthermore elongated gold nanostructures are obtained by sintering of gold nanoparticle double layers. The optical properties of these different gold nanostructures are directly connected to their morphology and geometrical arrangement - leading to surface plasmon resonances from the visible to the infrared wavelength range. Finally, SEIRA enhancement factors are determined. Gold nanoparticle double layers show the best performance as SEIRA substrates.}, language = {en} } @article{ShainyanSuslovaTranDinhPhienetal.2018, author = {Shainyan, Bagrat A. and Suslova, Elena N. and Tran Dinh Phien, and Shlykov, Sergey A. and Kleinpeter, Erich}, title = {Synthesis, conformational preferences in gas and solution, and molecular gear rotation in 1-(dimethylamino)-1-phenyl-1-silacyclohexane by gas phase electron diffraction (GED), LT NMR and theoretical calculations}, series = {Tetrahedron}, volume = {74}, journal = {Tetrahedron}, number = {32}, publisher = {Elsevier}, address = {Oxford}, issn = {0040-4020}, doi = {10.1016/j.tet.2018.06.023}, pages = {4299 -- 4307}, year = {2018}, abstract = {1-(Dimethylamino)-1-phenyl-1-silacyclohexane 1, was synthesized, and its molecular structure and conformational properties studied by gas-phase electron diffraction (GED), low temperature C-13 NMR spectroscopy and quantum-chemical calculations. The predominance of the 1-Ph-ax conformer (1-Ph-eq:1-Ph-ax ratio of 20:80\%, Delta G degrees (317 K) = -0.87 kcal/mol) in the gas phase is close to the theoretically estimated conformational equilibrium. In solution, low temperature NMR spectroscopy showed analyzable decoalescence of C-ipso and C(1,5) carbon signals in C-13 NMR spectra at 103 K. Opposite to the gas state in the freon solution employed (CD2Cl2/CHFCl2/CHFCl2 = 1:1:3), which is still liquid at 100 K, the 1-Ph-eq conformer was found to be the preferred one [(1-Ph-eq: 1-Ph-ax = 77\%: 23\%, K = 77/23 = 2.8; -Delta G degrees = -RT In K (at 103 K) = 0.44 +/- 0.1 kcal/mol]. When comparing 1 with 1-phenyl-1-(X)silacylohexanes (X = H, Me, OMe, F, Cl), studied so far, the trend of predominance of the Ph-ax conformer in the gas phase and of the Ph-eq conformer in solution is confirmed.}, language = {en} } @article{SenfRuprechtKishanietal.2018, author = {Senf, Deborah and Ruprecht, Colin and Kishani, Saina and Matic, Aleksandar and Toriz, Guillermo and Gatenholm, Paul and Wagberg, Lars and Pfrengle, Fabian}, title = {Tailormade polysaccharides with defined branching patterns}, series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition}, volume = {57}, journal = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition}, number = {37}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1433-7851}, doi = {10.1002/anie.201806871}, pages = {11987 -- 11992}, year = {2018}, abstract = {The heterogeneous nature of non-cellulosic polysaccharides, such as arabinoxylan, makes it difficult to correlate molecular structure with macroscopic properties. To study the impact of specific structural features of the polysaccharides on crystallinity or affinity to other cell wall components, collections of polysaccharides with defined repeating units are required. Herein, a chemoenzymatic approach to artificial arabinoxylan polysaccharides with systematically altered branching patterns is described. The polysaccharides were obtained by glycosynthase-catalyzed polymerization of glycosyl fluorides derived from arabinoxylan oligosaccharides. X-ray diffraction and adsorption experiments on cellulosic surfaces revealed that the physicochemical properties of the synthetic polysaccharides strongly depend on the specific nature of their substitution patterns. The artificial polysaccharides allow structure-property relationship studies that are not accessible by other means.}, language = {en} } @article{SchuermannVogelEbeletal.2018, author = {Sch{\"u}rmann, Robin Mathis and Vogel, Stefanie and Ebel, Kenny and Bald, Ilko}, title = {The physico-chemical basis of DNA radiosensitization}, series = {Chemistry - a European journal}, volume = {24}, journal = {Chemistry - a European journal}, number = {41}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0947-6539}, doi = {10.1002/chem.201800804}, pages = {10271 -- 10279}, year = {2018}, abstract = {High-energy radiation is used in combination with radiosensitizing therapeutics to treat cancer. The most common radiosensitizers are halogenated nucleosides and cisplatin derivatives, and recently also metal nanoparticles have been suggested as potential radiosensitizing agents. The radiosensitizing action of these compounds can at least partly be ascribed to an enhanced reactivity towards secondary low-energy electrons generated along the radiation track of the high-energy primary radiation, or to an additional emission of secondary reactive electrons close to the tumor tissue. This is referred to as physico-chemical radiosensitization. In this Concept article we present current experimental methods used to study fundamental processes of physico-chemical radiosensitization and discuss the most relevant classes of radiosensitizers. Open questions in the current discussions are identified and future directions outlined, which can lead to optimized treatment protocols or even novel therapeutic concepts.}, language = {en} } @misc{SchoenemannLaschewskyRosenhahn2018, author = {Sch{\"o}nemann, Eric and Laschewsky, Andr{\´e} and Rosenhahn, Axel}, title = {Exploring the long-term hydrolytic behavior of zwitterionic polymethacrylates and polymethacrylamides}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1091}, issn = {1866-8372}, doi = {10.25932/publishup-47305}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473052}, pages = {25}, year = {2018}, abstract = {The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) ("sulfobetaine methacrylate"), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) ("sulfobetaine methacrylamide") as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.}, language = {en} } @article{SchoenemannLaschewskyRosenhahn2018, author = {Sch{\"o}nemann, Eric and Laschewsky, Andre and Rosenhahn, Axel}, title = {Exploring the long-term hydrolytic behavior of zwitterionic polymethacrylates and polymethacrylamides}, series = {Polymers}, volume = {10}, journal = {Polymers}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, doi = {10.3390/polym10060639}, pages = {23}, year = {2018}, abstract = {The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) (sulfobetaine methacrylate), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) (sulfobetaine methacrylamide) as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by H-1 NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.}, language = {en} } @article{SchwarzeRiemerHoldt2018, author = {Schwarze, Thomas and Riemer, Janine and Holdt, Hans-J{\"u}rgen}, title = {A Ratiometric Fluorescent Probe for K+ in Water Based on a Phenylaza-18-Crown-6 Lariat Ether}, series = {Chemistry - a European journal}, volume = {24}, journal = {Chemistry - a European journal}, number = {40}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0947-6539}, doi = {10.1002/chem.201802306}, pages = {10116 -- 10121}, year = {2018}, abstract = {This work presents two molecular fluorescent probes 1 and 2 for the selective determination of physiologically relevant K+ levels in water based on a highly K+/Na+ selective building block, the o-(2-methoxyethoxy)phenylaza-18-crown-6 lariat ether unit. Fluorescent probe 1 showed a high K+-induced fluorescence enhancement (FE) by a factor of 7.7 of the anthracenic emission and a dissociation constant (K-d) value of 38mm in water. Further, for 2+K+, we observed a dual emission behavior at 405 and 505nm. K+ increases the fluorescence intensity of 2 at 405nm by a factor of approximately 4.6 and K+ decreases the fluorescence intensity at 505nm by a factor of about 4.8. Fluorescent probe 2+K+ exhibited a K-d value of approximately 8mm in Na+-free solutions and in combined K+/Na+ solution a similar K-d value of about 9mm was found, reflecting the high K+/Na+ selectivity of 2 in water. Therefore, 2 is a promising fluorescent tool to measure ratiometrically and selectively physiologically relevant K+ levels.}, language = {en} } @article{SchulzeMakuchWagnerKounavesetal.2018, author = {Schulze-Makuch, Dirk and Wagner, Dirk and Kounaves, Samuel P. and Mangelsdorf, Kai and Devine, Kevin G. and de Vera, Jean-Pierre and Schmitt-Kopplin, Philippe and Grossart, Hans-Peter and Parro, Victor and Kaupenjohann, Martin and Galy, Albert and Schneider, Beate and Airo, Alessandro and Froesler, Jan and Davila, Alfonso F. and Arens, Felix L. and Caceres, Luis and Cornejo, Francisco Solis and Carrizo, Daniel and Dartnell, Lewis and DiRuggiero, Jocelyne and Flury, Markus and Ganzert, Lars and Gessner, Mark O. and Grathwohl, Peter and Guan, Lisa and Heinz, Jacob and Hess, Matthias and Keppler, Frank and Maus, Deborah and McKay, Christopher P. and Meckenstock, Rainer U. and Montgomery, Wren and Oberlin, Elizabeth A. and Probst, Alexander J. and Saenz, Johan S. and Sattler, Tobias and Schirmack, Janosch and Sephton, Mark A. and Schloter, Michael and Uhl, Jenny and Valenzuela, Bernardita and Vestergaard, Gisle and Woermer, Lars and Zamorano, Pedro}, title = {Transitory microbial habitat in the hyperarid Atacama Desert}, series = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {115}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, number = {11}, publisher = {National Acad. of Sciences}, address = {Washington}, issn = {0027-8424}, doi = {10.1073/pnas.1714341115}, pages = {2670 -- 2675}, year = {2018}, language = {en} } @article{SchulzeWehrholdHille2018, author = {Schulze, Sven and Wehrhold, Michel and Hille, Carsten}, title = {Femtosecond-Pulsed laser written and etched fiber bragg gratings for fiber-optical biosensing}, series = {Sensors}, volume = {18}, journal = {Sensors}, number = {9}, publisher = {MDPI}, address = {Basel}, issn = {1424-8220}, doi = {10.3390/s18092844}, pages = {20}, year = {2018}, abstract = {We present the development of a label-free, highly sensitive fiber-optical biosensor for online detection and quantification of biomolecules. Here, the advantages of etched fiber Bragg gratings (eFBG) were used, since they induce a narrowband Bragg wavelength peak in the reflection operation mode. The gratings were fabricated point-by-point via a nonlinear absorption process of a highly focused femtosecond-pulsed laser, without the need of prior coating removal or specific fiber doping. The sensitivity of the Bragg wavelength peak to the surrounding refractive index (SRI), as needed for biochemical sensing, was realized by fiber cladding removal using hydrofluoric acid etching. For evaluation of biosensing capabilities, eFBG fibers were biofunctionalized with a single-stranded DNA aptamer specific for binding the C-reactive protein (CRP). Thus, the CRP-sensitive eFBG fiber-optical biosensor showed a very low limit of detection of 0.82 pg/L, with a dynamic range of CRP detection from approximately 0.8 pg/L to 1.2 mu g/L. The biosensor showed a high specificity to CRP even in the presence of interfering substances. These results suggest that the proposed biosensor is capable for quantification of CRP from trace amounts of clinical samples. In addition, the adaption of this eFBG fiber-optical biosensor for detection of other relevant analytes can be easily realized.}, language = {en} } @misc{SchulzeWehrholdHille2018, author = {Schulze, Sven and Wehrhold, Michel and Hille, Carsten}, title = {Femtosecond-pulsed laser written and etched fiber bragg gratings for fiber-optical biosensing}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1073}, issn = {1866-8372}, doi = {10.25932/publishup-47269}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472692}, pages = {22}, year = {2018}, abstract = {We present the development of a label-free, highly sensitive fiber-optical biosensor for online detection and quantification of biomolecules. Here, the advantages of etched fiber Bragg gratings (eFBG) were used, since they induce a narrowband Bragg wavelength peak in the reflection operation mode. The gratings were fabricated point-by-point via a nonlinear absorption process of a highly focused femtosecond-pulsed laser, without the need of prior coating removal or specific fiber doping. The sensitivity of the Bragg wavelength peak to the surrounding refractive index (SRI), as needed for biochemical sensing, was realized by fiber cladding removal using hydrofluoric acid etching. For evaluation of biosensing capabilities, eFBG fibers were biofunctionalized with a single-stranded DNA aptamer specific for binding the C-reactive protein (CRP). Thus, the CRP-sensitive eFBG fiber-optical biosensor showed a very low limit of detection of 0.82 pg/L, with a dynamic range of CRP detection from approximately 0.8 pg/L to 1.2 µg/L. The biosensor showed a high specificity to CRP even in the presence of interfering substances. These results suggest that the proposed biosensor is capable for quantification of CRP from trace amounts of clinical samples. In addition, the adaption of this eFBG fiber-optical biosensor for detection of other relevant analytes can be easily realized.}, language = {en} } @phdthesis{Schulze2018, author = {Schulze, Sven}, title = {Entwicklung und Charakterisierung optischer Biosensorplattformen basierend auf photonischen Kristallen und Faser-Bragg-Gitter}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-422139}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 149, A-23, B-2, C-8}, year = {2018}, abstract = {In dieser Arbeit steht die Entwicklung einer Sensorplattform f{\"u}r biochemische Anwendungen, welche auf einem optischen Detektionsprinzips beruht, im Vordergrund. W{\"a}hrend der Entwicklung wurden zwei komplement{\"a}re Konzeptideen behandelt, zum einen ein Sensor, der auf photonischen Kristallen und Wellenleiterstrukturen basiert und zum anderen einen faserbasierten Sensor, der chemisch modifizierte Faser-Bragg-Gitter enth{\"a}lt. Das optische Detektionsprinzip in beiden Sensorideen ist die resultierende Brechungsindex{\"a}nderung als messbare physikochemische Kenngr{\"o}ße. Das aus der Natur bekannte Ph{\"a}nomen der photonischen Kristalle, das u. a. bei Opalen und bei Schmetterlingen zu finden ist, wurde bereits 1887 von Lord Rayleigh beschrieben. Er beschrieb die optischen Eigenschaften von periodischen mehrschichtigen Filmen, welche als vereinfachtes Modell eines eindimensionalen photonischen Kristalls verstanden werden k{\"o}nnen. Die Periodizit{\"a}t der Brechungsindex{\"a}nderung resultiert in einem optischen Filter f{\"u}r Frequenzen in einem bestimmten spektralen Bereich, weshalb dann dort keine Lichtausbreitung mehr m{\"o}glich ist. Wird dieses System aber durch eine Defektstelle in der Brechungsindexperiodizit{\"a}t gest{\"o}rt, sodass daraus zwei perfekt periodische Systeme entstehen, ist die Lichtausbreitung f{\"u}r eine bestimmte Frequenz dennoch m{\"o}glich. In der Folge resultiert daraus ein schmalbandiges Signal im Transmissionsspektrum. Die erlaubte Frequenz ist dabei u. a. abh{\"a}ngig vom Brechungsindexunterschied des periodischen Systems, d.h. Ver{\"a}nderung des Brechungsindexes einer Schicht f{\"u}hrt zu einer spektralen Verschiebung der erlaubten Frequenz, dadurch kann dieses Sensorkonzept f{\"u}r biochemische Sensorik ausgenutzt werden [1]. Diese Entwicklung des auf photonischen Kristallen basierenden Sensors war eine Kooperation mit dem Industriepartner „Nanoplus GmbH". In der Doktorarbeit wurden Simulationen und praktischen Arbeiten zur Designentwicklung des Sensors und die Arbeiten an einem ersten Modellaufbau f{\"u}r die biochemischen Anwendungen durchgef{\"u}hrt. F{\"u}r den faserbasierten Sensor wurden Faser-Bragg-Gitter in den Faserkern hineingeschrieben. Hill et al. entdeckten 1978, dass solche Gitterstrukturen genau wie photonische Kristalle als optische Filter fungieren [2]. Die Gitter bestehen dabei aus {\"A}nderungen des Brechungsindexes im Faserkern. Im Laufe der n{\"a}chsten vierzig Jahren wurden verschiedene Einschreibetechniken und Gitterstrukturen entwickelt, weshalb die Eigenschaften der jeweiligen Gitterstrukturen variieren. Eine solche Gitterstruktur sind u. a. die Faser-Bragg-Gitter, deren Gitterperiode, d. h. die Abst{\"a}nde der Brechungsindexmodifikationen, sich im Nanometer- bis Mikrometerbereich befinden. Aufgrund der kleinen Gitterperiode wird eine r{\"u}ckw{\"a}rtsf{\"u}hrende Welle im Kern f{\"u}r eine bestimmte Frequenz bzw. Wellenl{\"a}nge, der Bragg-Wellenl{\"a}nge, erzeugt. Im Endeffekt resultiert daraus ein schmalbandiges Signal sowohl im Transmissionsspektrum, als auch im Reflexionsspektrum. Die Resonanzwellenl{\"a}nge ist dabei proportional zu der Gitterperiode und dem effektiven Brechungsindex, welcher vom Brechungsindex des Kerns und des kernumgebenen Materials abh{\"a}ngig ist. Letztlich eignet sich diese Technik f{\"u}r physikochemische Sensorik. Im Rahmen dieser Arbeit wurden die Gitter mit Hilfe einer relativen neuen Herstellungsmethode in die Fasern geschrieben [3]. Anschließend stand die Entwicklung eines Biosensors im Vordergrund, wobei zun{\"a}chst ein Protokoll zum {\"A}tzen der Faser mit Flusss{\"a}ure entwickelt worden ist, dass das System sensitiv zum umgebenen Brechungsindex macht. Am Ende wurde ein Modellaufbau realisiert, indem ein Modellsystem, hier die Detektion vom C-reaktiven Protein mittels spezifischen einzelstr{\"a}ngigen DNS-Aptameren, erfolgreich getestet und quantifiziert worden ist. 1 Mandal, S.; Erickson, D. Nanoscale Optofluidic Sensor Arrays. Opt. Express 2008, 16 (3), 1623-1631. 2 Hill, K. O.; Fujii, Y.; Johnson, D. C.; Kawasaki, B. S. Photosensitivity in Optical Fiber Waveguides: Application to Reflection Filter Fabrication. Appl. Phys. Lett. 1978, 32 (10), 647-649. 3 Mart{\´i}nez, A.; Dubov, M.; Khrushchev, I.; Bennion, I. Direct Writing of Fibre Bragg Gratings by Femtosecond Laser. Electron. Lett. 2004, 40 (19), 1170.}, language = {de} } @article{SchulzMehrabiMuellerWerkmeisteretal.2018, author = {Schulz, Eike C. and Mehrabi, Pedram and M{\"u}ller-Werkmeister, Henrike and Tellkamp, Friedjof and Jha, Ajay and Stuart, William and Persch, Elke and De Gasparo, Raoul and Diederich, Fran{\c{c}}ois and Pai, Emil F. and Miller, R. J. Dwayne}, title = {The hit-and-return system enables efficient time-resolved serial synchrotron crystallography}, series = {Nature methods : techniques for life scientists and chemists}, volume = {15}, journal = {Nature methods : techniques for life scientists and chemists}, number = {11}, publisher = {Nature Publishing Group (London)}, address = {London}, issn = {1548-7091}, doi = {10.1038/s41592-018-0180-2}, pages = {901 -- 904}, year = {2018}, abstract = {We present a 'hit-and-return' (HARE) method for time-resolved serial synchrotron crystallography with time resolution from milliseconds to seconds or longer. Timing delays are set mechanically, using the regular pattern in fixed-target crystallography chips and a translation stage system. Optical pump-probe experiments to capture intermediate structures of fluoroacetate dehalogenase binding to its ligand demonstrated that data can be collected at short (30 ms), medium (752 ms) and long (2,052 ms) intervals.}, language = {en} } @article{SchultzeSchmidt2018, author = {Schultze, Christiane and Schmidt, Bernd}, title = {Prenylcoumarins in One or Two Steps by a Microwave-Promoted Tandem Claisen Rearrangement/Wittig Olefination/Cyclization Sequence}, series = {The journal of organic chemistry}, volume = {83}, journal = {The journal of organic chemistry}, number = {9}, publisher = {American Chemical Society}, address = {Washington}, issn = {0022-3263}, doi = {10.1021/acs.joc.8b00667}, pages = {5210 -- 5224}, year = {2018}, abstract = {The one-pot synthesis of 8-prenylcoumarins from 1,1-dimethylallylated salicylaldehydes and the stabilized ylide [(ethoxycarbonyl)methylene]triphenylphosphorane under microwave conditions was found to have a limited scope. The sequence suffers from a difficult and sometimes low-yielding synthesis of the precursors and from a competing deprenylation upon microwave irradiation. This side reaction occurs in particular with electron rich arenes with two or more alkoxy groups at adjacent positions, a prominent substitution pattern in naturally occurring 8-prenylcoumarins. Both limitations of this one-step sequence were overcome by a two-step synthesis consisting of a microwave-promoted tandem allyl ether Claisen rearrangement/Wittig olefination and a subsequent olefin cross metathesis with 2-methyl-2-butene. The cross metathesis step proceeds with a high selectivity and yields exclusively the desired prenyl, rather than the alternative crotyl substituent. Several naturally occurring 8-prenylcoumarins that were previously inaccessible have been synthesized in good overall yields along this route.}, language = {en} } @article{SchultzeSchmidt2018, author = {Schultze, Christiane and Schmidt, Bernd}, title = {Ring-closing-metathesis-based synthesis of annellated coumarins from 8-allylcoumarins}, series = {Beilstein journal of organic chemistry}, volume = {14}, journal = {Beilstein journal of organic chemistry}, publisher = {Beilstein-Institut zur F{\"o}rderung der Chemischen Wissenschaften}, address = {Frankfurt, Main}, issn = {1860-5397}, doi = {10.3762/bjoc.14.278}, pages = {2991 -- 2998}, year = {2018}, abstract = {8-Allylcoumarins are conveniently accessible through a microwave-promoted tandem Claisen rearrangement/Wittig olefination/cyclization sequence. They serve as a versatile platform for the annellation of five- to seven-membered rings using ring-closing olefin metathesis (RCM). Furano-, pyrano-, oxepino- and azepinocoumarins were synthesized from the same set of precursors using Ru-catalyzed double bond isomerizations and RCM in a defined order. One class of products, pyrano[2,3-f]chromene-2,8-diones, were inaccessible through direct RCM of an acrylate, but became available from the analogous allyl ether via an assisted tandem catalytic RCM/allylic oxidation sequence.}, language = {en} } @misc{SchneiderGuenterTaubert2018, author = {Schneider, Matthias and G{\"u}nter, Christina and Taubert, Andreas}, title = {Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1057}, issn = {1866-8372}, doi = {10.25932/publishup-47442}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-474427}, pages = {21}, year = {2018}, abstract = {The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.}, language = {en} } @article{SchneiderGuenterTaubert2018, author = {Schneider, Matthias and G{\"u}nter, Christina and Taubert, Andreas}, title = {Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating}, series = {Polymers}, volume = {10}, journal = {Polymers}, number = {3}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, doi = {10.3390/polym10030275}, pages = {19}, year = {2018}, abstract = {The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.}, language = {en} } @article{SchmidtSchultze2018, author = {Schmidt, Bernd and Schultze, Christiane}, title = {A one-pot synthesis of pyranocoumarins through microwave-promoted propargyl claisen rearrangement/wittig olefination}, series = {European journal of organic chemistry}, volume = {2018}, journal = {European journal of organic chemistry}, number = {2}, publisher = {Wiley-VCH Verl.}, address = {Weinheim}, issn = {1434-193X}, pages = {223 -- 227}, year = {2018}, abstract = {The reaction between propargyl ethers of hydroxybenzaldehydes and the ylide ethyl (triphenylphosphoranylidene)acetate was carried out under microwave irradiation to regioselectively afford angular pyranocoumarins. The chromene and coumarin heterocyclic scaffolds were simultaneously formed in the same synthetic step without changing the reaction conditions. The natural products seselin, braylin, and dipetalolactone were among the products synthesized by this method.}, language = {en} } @article{SchmidtPetersenBraun2018, author = {Schmidt, Bernd and Petersen, Monib H. and Braun, Diana}, title = {Bidirectional Synthesis of 6-Acetoxy-5-hexadecanolide, the Mosquito Oviposition Pheromone of Culex quinquefasciatus, from a C-2-Symmetric Building Block Using Olefin Metathesis Reactions}, series = {The journal of organic chemistry}, volume = {83}, journal = {The journal of organic chemistry}, number = {3}, publisher = {American Chemical Society}, address = {Washington}, issn = {0022-3263}, doi = {10.1021/acs.joc.7b02944}, pages = {1627 -- 1633}, year = {2018}, abstract = {(5R,6S)-6-Acetoxy-5-hexadecanolide (MOP) is the oviposition pheromone of the mosquito Cx. quinquefasciatus, a vector of pathogens causing a variety of tropical diseases. We describe and evaluate herein three syntheses of MOP starting from mannitol-derived (3R,4R)-hexa-1,5-diene-3,4-diol. This C-2-symmetric building block is elaborated through bidirectional olefin metathesis reactions into 6-epi-MOP, which was converted into MOP via Mitsunobu inversion. The shortest of the three routes makes use of two sequential cross-metathesis reactions and an assisted tandem catalytic olefin reduction, induced by an in situ conversion of a Ru-carbene to a Ru-hydride.}, language = {en} } @phdthesis{Schimka2018, author = {Schimka, Selina}, title = {Photoresponsive soft nano-objects}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2018}, language = {en} } @article{SaremAryaHeizmannetal.2018, author = {Sarem, Melika and Arya, Neha and Heizmann, Miriam and Neffe, Axel T. and Barbero, Andrea and Gebauer, Tim P. and Martin, Ivan and Lendlein, Andreas and Shastri, V. Prasad}, title = {Interplay between stiffness and degradation of architectured gelatin hydrogels leads to differential modulation of chondrogenesis in vitro and in vivo}, series = {Acta biomaterialia}, volume = {69}, journal = {Acta biomaterialia}, publisher = {Elsevier}, address = {Oxford}, issn = {1742-7061}, doi = {10.1016/j.actbio.2018.01.025}, pages = {83 -- 94}, year = {2018}, abstract = {The limited capacity of cartilage to heal large lesions through endogenous mechanisms has led to extensive effort to develop materials to facilitate chondrogenesis. Although physical-chemical properties of biomaterials have been shown to impact in vitro chondrogenesis, whether these findings are translatable in vivo is subject of debate. Herein, architectured 3D hydrogel scaffolds (ArcGel) (produced by crosslinking gelatin with ethyl lysine diisocyanate (LDI)) were used as a model system to investigate the interplay between scaffold mechanical properties and degradation on matrix deposition by human articular chondrocytes (HAC) from healthy donors in vitro and in vivo. Using ArcGel scaffolds of different tensile and shear modulus, and degradation behavior; in this study, we compared the fate of ex vivo engineeredArcGels-chondrocytes constructs, i.e. the traditional tissue engineering approach, with the de novo formation of cartilaginous tissue in HAC laden ArcGels in an ectopic nude mouse model. While the softer and fast degrading ArcGel (LNCO3) was more efficient at promoting chondrogenic differentiation in vitro, upon ectopic implantation, the stiffer and slow degrading ArcGel (LNCO8) was superior in maintaining chondrogenic phenotype in HAC and retention of cartilaginous matrix. Furthermore, surprisingly the de novo formation of cartilage tissue was promoted only in LNCO8. Since HAC cultured for only three days in the LNCO8 environment showed upregulation of hypoxia-associated genes, this suggests a potential role for hypoxia in the observed in vivo outcomes. In summary, this study sheds light on how immediate environment (in vivo versus in vitro) can significantly impact the outcomes of cell-laden biomaterials. Statement of Significance In this study, 3D architectured hydrogels (ArcGels) with different mechanical and biodegradation properties were investigated for their potential to promote formation of cartilaginous matrix by human articular chondrocytes in vitro and in vivo. Two paradigms were explored (i) ex vivo engineering followed by in vivo implantation in ectopic site of nude mice and (ii) short in vitro culture (3 days) followed by implantation to induce de novo cartilage formation. Softer and fast degrading ArcGel were better at promoting chondrogenesis in vitro, while stiffer and slow degrading ArcGel were strikingly superior in both maintaining chondrogenesis in vivo and inducing de novo formation of cartilage. Our findings highlight the importance of the interplay between scaffold mechanics and degradation in chondrogenesis.}, language = {en} } @misc{Santer2018, author = {Santer, Svetlana}, title = {Light responsive soft nano-objects}, series = {Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS}, volume = {256}, journal = {Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS}, publisher = {American Chemical Society}, address = {Washington}, issn = {0065-7727}, pages = {1}, year = {2018}, language = {en} } @article{SalibaCorreaBaenaWolffetal.2018, author = {Saliba, Michael and Correa-Baena, Juan-Pablo and Wolff, Christian Michael and Stolterfoht, Martin and Phung, Thi Thuy Nga and Albrecht, Steve and Neher, Dieter and Abate, Antonio}, title = {How to Make over 20\% Efficient Perovskite Solar Cells in Regular (n-i-p) and Inverted (p-i-n) Architectures}, series = {Chemistry of materials : a publication of the American Chemical Society}, volume = {30}, journal = {Chemistry of materials : a publication of the American Chemical Society}, number = {13}, publisher = {American Chemical Society}, address = {Washington}, issn = {0897-4756}, doi = {10.1021/acs.chemmater.8b00136}, pages = {4193 -- 4201}, year = {2018}, abstract = {Perovskite solar cells (PSCs) are currently one of the most promising photovoltaic technologies for highly efficient and cost-effective solar energy production. In only a few years, an unprecedented progression of preparation procedures and material compositions delivered lab-scale devices that have now reached record power conversion efficiencies (PCEs) higher than 20\%, competing with most established solar cell materials such as silicon, CIGS, and CdTe. However, despite a large number of researchers currently involved in this topic, only a few groups in the world can reproduce >20\% efficiencies on a regular n-i-p architecture. In this work, we present detailed protocols for preparing PSCs in regular (n-i-p) and inverted (p-i-n) architectures with >= 20\% PCE. We aim to provide a comprehensive, reproducible description of our device fabrication , protocols. We encourage the practice of reporting detailed and transparent protocols that can be more easily reproduced by other laboratories. A better reporting standard may, in turn, accelerate the development of perovskite solar cells and related research fields.}, language = {en} } @article{RuehlmannBuecheleOstermannetal.2018, author = {R{\"u}hlmann, Madlen and B{\"u}chele, Dominique and Ostermann, Markus and Bald, Ilko and Schmid, Thomas}, title = {Challenges in the quantification of nutrients in soils using laser-induced breakdown spectroscopy}, series = {Spectrochimica Acta Part B: Atomic Spectroscopy}, volume = {146}, journal = {Spectrochimica Acta Part B: Atomic Spectroscopy}, publisher = {Elsevier}, address = {Oxford}, issn = {0584-8547}, doi = {10.1016/j.sab.2018.05.003}, pages = {115 -- 121}, year = {2018}, abstract = {The quantification of the elemental content in soils with laser-induced breakdown spectroscopy (LIBS) is challenging because of matrix effects strongly influencing the plasma formation and LIBS signal. Furthermore, soil heterogeneity at the micrometre scale can affect the accuracy of analytical results. In this paper, the impact of univariate and multivariate data evaluation approaches on the quantification of nutrients in soil is discussed. Exemplarily, results for calcium are shown, which reflect trends also observed for other elements like magnesium, silicon and iron. For the calibration models, 16 certified reference soils were used. With univariate and multivariate approaches, the calcium mass fractions in 60 soils from different testing grounds in Germany were calculated. The latter approach consisted of a principal component analysis (PCA) of adequately pre-treated data for classification and identification of outliers, followed by partial least squares regression (PLSR) for quantification. For validation, the soils were also characterised with inductively coupled plasma optical emission spectroscopy (ICP OES) and X-ray fluorescence (XRF) analysis. Deviations between the LIBS quantification results and the reference analytical results are discussed.}, language = {en} } @phdthesis{Rumschoettel2018, author = {Rumsch{\"o}ttel, Jens}, title = {Charakterisierung von DNA-Polyplexen mit verzweigten reinen und Maltose modifizierten Poly(ethyleniminen) sowie Polyplexen mit Goldnanopartikeln}, school = {Universit{\"a}t Potsdam}, pages = {125}, year = {2018}, language = {de} } @article{RoderHille2018, author = {Roder, Phillip and Hille, Carsten}, title = {Local tissue manipulation via a force- and pressure-controlled AFM micropipette for analysis of cellular processes}, series = {Scientific reports}, volume = {8}, journal = {Scientific reports}, publisher = {Nature Publ. Group}, address = {London}, issn = {2045-2322}, doi = {10.1038/s41598-018-24255-9}, pages = {9}, year = {2018}, abstract = {Local manipulation of complex tissues at the single-cell level is challenging and requires excellent sealing between the specimen and the micromanipulation device. Here, biological applications for a recently developed loading technique for a force-and pressure-controlled fluidic force microscope micropipette are described. This technique allows for the exact positioning and precise spatiotemporal control of liquid delivery. The feasibility of a local loading technique for tissue applications was investigated using two fluorescent dyes, with which local loading behaviour could be optically visualised. Thus, homogeneous intracellular distribution of CellTracker Red and accumulation of SYTO 9 Green within nuclei was realised in single cells of a tissue preparation. Subsequently, physiological micromanipulation experiments were performed. Salivary gland tissue was pre-incubated with the Ca2+-sensitive dye OGB-1. An intracellular Ca2+ rise was then initiated at the single-cell level by applying dopamine via micropipette. When pre-incubating tissue with the nitric oxide (NO)-sensitive dye DAF-FM, NO release and intercellular NO diffusion was observed after local application of the NO donor SNP. Finally, local micromanipulation of a well-defined area along irregularly shaped cell surfaces of complex biosystems was shown for the first time for the fluidic force microscope micropipette. Thus, this technique is a promising tool for the investigation of the spatiotemporal effects of locally applied substances in complex tissues.}, language = {en} } @phdthesis{Roder2018, author = {Roder, Phillip}, title = {Kombination von Fluoreszenzmikroskopie und Rasterkraftmikroskopie zur Aufkl{\"a}rung physiologischer Prozesse in lebenden Zellen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-419806}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 113}, year = {2018}, abstract = {Innerhalb dieser Doktorarbeit wurde eine neuartige Mikromanipulationstechnik f{\"u}r die lokale Fl{\"u}ssigkeitsabgabe am komplexen Dr{\"u}sengewebe der Schabe P. americana charakterisiert und f{\"u}r die damit verbundene gezielte Manipulation von einzelnen Zellen in einem Zellkomplex (Gewebe) angewandt. Bei dieser Mikromanipulationstechnik handelt es sich um die seit 2009 bekannte nanofluidische Rasterkraftmikroskopie (FluidFM = fluidic force microscopy). Dabei werden sehr kleine mikrokan{\"a}lige Rasterkraftspitzen bzw. Mikro-/Nanopipetten mit einer {\"O}ffnung zwischen 300 nm und 2 µm verwendet, mit denen es m{\"o}glich ist, sehr kleine Volumina im Pikoliter- bis Femtoliter-Bereich (10-12 L - 10-15 L) gezielt und ortsgenau abzugeben. Das Ziel dieser Arbeit war die Analyse zellul{\"a}rer Prozesse, wie z. B. Zell-Zell-Kommunikation oder Signalweiterleitung, zwischen benachbarten Zellen unter Zuhilfenahme der Fluoreszenzmikroskopie. Mit dieser Methode k{\"o}nnen die Zellen und ihre Bestandteile mittels vorheriger Farbstoffbeladung unter einem Mikroskop mit hohem Kontrast optisch dargestellt werden. Mit Hilfe der Fluoreszenzmikroskopie sollten schlussendlich die zellul{\"a}ren Reaktionen innerhalb des Gewebes nach der lokalen Manipulation visualisiert werden. Zun{\"a}chst wurde die Anwendung des Systems an Luft und w{\"a}ssriger Umgebung beschrieben. In diesem Zusammenhang wurde eine Reinigungs- und Beladungsmethode entwickelt, mit der es m{\"o}glich war, die kostspieligen Mikro-/Nanopipetten zu reinigen und anschließend mehrmals wiederzuverwenden. Hierzu wurde eine alternative Methode getestet, mit der das Diffusionsverhalten von Farbstoffmolek{\"u}len in unterschiedlichen Medien untersucht werden kann. Des Weiteren wurden die Systemparameter optimiert, welche n{\"o}tig sind, um zwischen der Probenoberfl{\"a}che und der Pipette einen guten Pipetten{\"o}ffnungs-abschluss zu erhalten. Dieser Abschluss ist essentiell, damit die abgegebene Fl{\"u}ssigkeit ausschließlich in der Abgaberegion mit der Probe wechselwirkt und die darauffolgenden Reaktionen nur innerhalb des Gewebes erfolgen, da ansonsten die Zell-Zell-Signalweiterleitung zwischen den Zellen nicht eindeutig nachvollzogen werden kann. Diese interzellul{\"a}re Kommunikation wurde anhand zweier sekund{\"a}rer Botenstoffe (Ca2+ und NO) untersucht. Hierbei war es m{\"o}glich einzelne lokale Reaktionen zu detektieren, welche sich {\"u}ber weitere Zellen ausbreiteten. Schlussendlich wurde die Fertigung einer speziellen Injektionspipette beschrieben, welche an zwei biologischen Systemen getestet wurde.}, language = {de} } @article{RiemerCoswigShipmanetal.2018, author = {Riemer, Nastja and Coswig, Christin and Shipman, Michael and Schmidt, Bernd}, title = {Palladium-catalyzed cross-coupling of arenediazonium salts with organoindium or organobismuth reagents}, series = {Synlett : accounts and rapid communications in synthetic organic chemistry}, volume = {29}, journal = {Synlett : accounts and rapid communications in synthetic organic chemistry}, number = {18}, publisher = {Georg Thieme Verlag KG}, address = {Stuttgart}, issn = {0936-5214}, doi = {10.1055/s-0037-1611001}, pages = {2427 -- 2431}, year = {2018}, abstract = {Arylindium and isolated triarylbismuth compounds generated in situ react as nucleophiles with arenediazonium salts in palladium-catalyzed cross-coupling reactions to give substituted biphenyls.}, language = {en} } @phdthesis{Riemer2018, author = {Riemer, Nastja}, title = {Diazoniumsalze f{\"u}r die Synthese von Pflanzenschutzmitteln}, school = {Universit{\"a}t Potsdam}, pages = {187}, year = {2018}, language = {de} } @article{RibarHuberSmialeketal.2018, author = {Ribar, Anita and Huber, Stefan E. and Smialek, Malgorzata A. and Tanzer, Katrin and Neustetter, Michael and Sch{\"u}rmann, Robin and Bald, Ilko and Denifl, Stephan}, title = {Hydroperoxyl radical and formic acid formation from common DNA stabilizers upon low energy electron attachment}, series = {Physical chemistry, chemical physics : a journal of European Chemical Societies}, volume = {20}, journal = {Physical chemistry, chemical physics : a journal of European Chemical Societies}, number = {8}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1463-9076}, doi = {10.1039/c7cp07697e}, pages = {5578 -- 5585}, year = {2018}, abstract = {2-Amino-2-(hydroxymethyl)-1,3-propanediol (TRIS) and ethylenediaminetetraacetic acid ( EDTA) are key components of biological buffers and are frequently used as DNA stabilizers in irradiation studies. Such surface or liquid phase studies are done with the aim to understand the fundamental mechanisms of DNA radiation damage and to improve cancer radiotherapy. When ionizing radiation is used, abundant secondary electrons are formed during the irradiation process, which are able to attach to the molecular compounds present on the surface. In the present study we experimentally investigate low energy electron attachment to TRIS and methyliminodiacetic acid ( MIDA), an analogue of EDTA, supported by quantum chemical calculations. The most prominent dissociation channel for TRIS is through hydroperoxyl radical formation, whereas the dissociation of MIDA results in the formation of formic and acetic acid. These compounds are well-known to cause DNA modifications, like strand breaks. The present results indicate that buffer compounds may not have an exclusive protecting effect on DNA as suggested previously.}, language = {en} } @article{ReegHeineMihanetal.2018, author = {Reeg, Jette and Heine, Simon and Mihan, Christine and Preuss, Thomas G. and McGee, Sean and Jeltsch, Florian}, title = {Potential impact of effects on reproductive attributes induced by herbicides on a plant community}, series = {Environmental Toxicology and Chemistry}, volume = {37}, journal = {Environmental Toxicology and Chemistry}, number = {6}, publisher = {Wiley}, address = {Hoboken}, issn = {0730-7268}, doi = {10.1002/etc.4122}, pages = {1707 -- 1722}, year = {2018}, abstract = {Current herbicide risk assessment guidelines for nontarget terrestrial plants require testing effects on young, vulnerable life stages (i.e., seedling emergence [and subsequent growth] and vegetative vigor [growth and dry wt]) but not directly on the reproduction of plants. However, the European Food Safety Authority (EFSA) has proposed that effects on reproduction might be considered when evaluating the potential effects on plants. We adapted the plant community model for grassland (IBC-grass) to give insight into the current debate on the sensitivity of reproductive versus vegetative endpoints in ecological risk assessment. In an extensive sensitivity analysis of this model, we compared plant attributes potentially affected by herbicides and the consequences for long-term plant population dynamics and plant diversity. This evaluation was implemented by reducing reproductive as well as vegetative endpoints by certain percentages (e.g., 10-90\%) as a theoretical assumption. Plant mortality and seed sterility (i.e., inability of seeds to germinate) were the most sensitive attributes. Our results indicated that effects on seed production at off-field exposure rates must be very strong to have an impact on the risk assessment. Otherwise, effects on seed production are compensated for by the soil seed bank. The present study highlights the usefulness of community level modeling studies to support regulators in their decisions on the appropriate risk assessment endpoints and provides confidence in their assessments. Environ Toxicol Chem 2018;37:1707-1722. (c) 2018 SETAC}, language = {en} } @article{RazzaqBehlLendlein2018, author = {Razzaq, Muhammad Yasar and Behl, Marc and Lendlein, Andreas}, title = {Thermally-induced actuation of magnetic nanocomposites based on Oligo(ω-pentadecalactone) and covalently integrated magnetic nanoparticles}, series = {MRS advances: a journal of the Materials Research Society (MRS)}, volume = {3}, journal = {MRS advances: a journal of the Materials Research Society (MRS)}, number = {63}, publisher = {Cambridge University Press}, address = {New York}, issn = {2059-8521}, doi = {10.1557/adv.2018.613}, pages = {3783 -- 3791}, year = {2018}, abstract = {The incorporation of inorganic particles in a polymer matrix has been established as a method to adjust the mechanical performance of composite materials. We report on the influence of covalent integration of magnetic nanoparticles (MNP) on the actuation behavior and mechanical performance of hybrid nanocomposite (H-NC) based shape-memory polymer actuators (SMPA). The H-NC were synthesized by reacting two types of oligo(ω-pentadecalactone) (OPDL) based precursors with terminal hydroxy groups, a three arm OPDL (3 AOPDL, Mn = 6000 g mol•1-1 ) and an OPDL (Mn =3300 g • mol-1 ) coated magnetite nanoparticle ({\O} = 10 ± 2 nm), with a diisocyanate. These H-NC were compared to the homopolymer network regarding the actuation performance, contractual stress (σcontr) as well as thermal and mechanical properties. The melting range of the OPDL crystals (ΔTm,OPDL) was shifted in homo polymer networks from 36 ºC - 76 ºC to 41ºC - 81 °C for H-NC with 9 wt\% of MNP content. The actuators were explored by variation of separating temperature (Tsep), which splits the OPDL crystalline domain into actuating and geometry determining segments. Tsep was varied in the melting range of the nanocomposites and the actuation capability and contractual stress (σcontr) of the nanocomposite actuators could be adjusted. The reversible strain (εrev) was decreased from 11 ± 0.3\% for homo polymer network to 3.2±0.3\% for H-NC9 with 9 wt\% of MNP indicating a restraining effect of the MNP on chain mobility. The results show that the performance of H-NCs in terms of thermal and elastic properties can be tailored by MNP content, however for higher reversible actuation, lower MNP contents are preferable.}, language = {en} } @article{RajuLiebigKlemkeetal.2018, author = {Raju, Rajarshi Roy and Liebig, Ferenc and Klemke, Bastian and Koetz, Joachim}, title = {pH-responsive magnetic Pickering Janus emulsions}, series = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft}, volume = {296}, journal = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft}, number = {6}, publisher = {Springer}, address = {New York}, issn = {0303-402X}, doi = {10.1007/s00396-018-4321-z}, pages = {1039 -- 1046}, year = {2018}, abstract = {We report ultrasonically generated pH-responsive Pickering Janus emulsions of olive oil and silicone oil with controllable droplet size and engulfment. Chitosan was used as a pH-responsive emulsifier. The increase of pH from 2 to 6 leads to a transition from completely engulfed double emulsion droplets to dumbbell-shaped Janus droplets accompanied by a significant decrease of droplet diameter and a more homogeneous size distribution. The results can be elucidated by the conformational change of chitosan from a more extended form at pH 2 to a more flexible form at pH 4-5. Magnetic responsiveness to the emulsion was attributed by dispersing superparamagnetic nanoparticles (Fe3O4 with diameter of 13 +/- 2 nm) in the olive oil phase before preparing the Janus emulsion. Incorporation of magnetic nanoparticles leads to superior emulsion stability, drastically reduced droplet diameters, and opened the way to control movement and orientation of the Janus droplets according to an external magnetic field.}, language = {en} } @article{RackwitzBald2018, author = {Rackwitz, Jenny and Bald, Ilko}, title = {Low-energy electron-induced strand breaks in telomere-derived DNA sequences}, series = {Chemistry - a European journal}, volume = {24}, journal = {Chemistry - a European journal}, number = {18}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0947-6539}, doi = {10.1002/chem.201705889}, pages = {4680 -- 4688}, year = {2018}, abstract = {During cancer radiation therapy high-energy radiation is used to reduce tumour tissue. The irradiation produces a shower of secondary low-energy (<20 eV) electrons, which are able to damage DNA very efficiently by dissociative electron attachment. Recently, it was suggested that low-energy electron-induced DNA strand breaks strongly depend on the specific DNA sequence with a high sensitivity of G-rich sequences. Here, we use DNA origami platforms to expose G-rich telomere sequences to low-energy (8.8 eV) electrons to determine absolute cross sections for strand breakage and to study the influence of sequence modifications and topology of telomeric DNA on the strand breakage. We find that the telomeric DNA 5′-(TTA GGG)2 is more sensitive to low-energy electrons than an intermixed sequence 5′-(TGT GTG A)2 confirming the unique electronic properties resulting from G-stacking. With increasing length of the oligonucleotide (i.e., going from 5′-(GGG ATT)2 to 5′-(GGG ATT)4), both the variety of topology and the electron-induced strand break cross sections increase. Addition of K+ ions decreases the strand break cross section for all sequences that are able to fold G-quadruplexes or G-intermediates, whereas the strand break cross section for the intermixed sequence remains unchanged. These results indicate that telomeric DNA is rather sensitive towards low-energy electron-induced strand breakage suggesting significant telomere shortening that can also occur during cancer radiation therapy.}, language = {en} } @article{QiZhangKochovskietal.2018, author = {Qi, Wenjing and Zhang, Yufei and Kochovski, Zdravko and Wang, Jue and Lu, Yan and Chen, Guosong and Jiang, Ming}, title = {Self-assembly of Human Galectin-1 via dual supramolecular interactions and its inhibition of T-cell agglutination and apoptosis}, series = {Nano Research}, volume = {11}, journal = {Nano Research}, number = {10}, publisher = {Tsinghua Univ Press}, address = {Beijing}, issn = {1998-0124}, doi = {10.1007/s12274-018-2169-7}, pages = {5566 -- 5572}, year = {2018}, abstract = {Recently, we proposed a new strategy to construct artificial plant protein assemblies, which were induced by adding a small molecule, based on dual supramolecular interactions. In this paper, we further explored this method by employing Human Galectin-1 (Gal-1) as a building block to form self-assembled microribbons. Two non-covalent interactions, including lactose-lectin binding and dimerization of Rhodamine B (RhB), induced by the small molecule ligand addition, were involved in the crosslinking of the animal protein, resulting in the formation of assemblies. By using transmission electron microscopy (TEM), cryo-electron microscopy (cryo-EM), and three-dimensional (3D) tomographic analysis, we arrived at a possible mechanistic model for the microribbon formation. Furthermore, the morphology of protein assemblies could be fine-timed by varying the incubation time, the protein/ligand ratio, and the chemical structures of ligands. Interestingly, the formation of protein microribbons successfully inhibited Gal-1 induced T-cell agglutination and apoptosis. This is because the multivalent and dynamic interactions in protein assemblies compete with the binding between Gal-1 and the glycans on cell surfaces, which suppresses the function of Gal-1 in promotion of tumor progression and metastasis.}, language = {en} } @article{PoghosyanShahinyanKoetz2018, author = {Poghosyan, Armen H. and Shahinyan, A. A. and Koetz, Joachim}, title = {Self-assembled monolayer formation of distorted cylindrical AOT micelles on gold surfaces}, series = {Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects}, volume = {546}, journal = {Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2018.02.067}, pages = {20 -- 27}, year = {2018}, abstract = {Self-assembling features of sodium dioctyl sulfosuccinate (AOT) molecules and micelle adsorption on gold Au (111) surfaces have been examined using molecular dynamics simulation. We argue that AOT micelles display a strong adsorption on gold surfaces resulting in distorted cylindrical micelles attached to the (111) facets. The well protected Au(111) facets decorated by a dense packed elongated ellipsoidal AOT layer hinder the diffusion of the reactant to the (111) facets and could result in the preferential growth of ultra-thin gold nanoplatelets.}, language = {en} } @article{PoghosyanShahinyanKoetz2018, author = {Poghosyan, Armen H. and Shahinyan, A. A. and Koetz, Joachim}, title = {Catanionic AOT/BDAC micelles on gold {111} surfaces}, series = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft}, volume = {296}, journal = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft}, number = {8}, publisher = {Springer}, address = {New York}, issn = {0303-402X}, doi = {10.1007/s00396-018-4348-1}, pages = {1301 -- 1306}, year = {2018}, abstract = {A sodium dioctyl sulfosuccinate (AOT)/benzyl hexadecyl dimethyl ammonium chloride (BDAC) mixed micelle self-organization and adsorption on gold Au(111) surfaces have been investigated using a molecular dynamics approach. The spherical AOT/BDAC mixed micelle is strongly adsorbed on the gold surface and is disoriented to a cylinder-like shape.}, language = {en} } @article{PloetzMegowNiehausetal.2018, author = {Pl{\"o}tz, Per-Arno and Megow, J{\"o}rg and Niehaus, Thomas and K{\"u}hn, Oliver}, title = {All-DFTB Approach to the Parametrization of the System-Bath Hamiltonian Describing Exciton-Vibrational Dynamics of Molecular Assemblies}, series = {Journal of chemical theory and computation}, volume = {14}, journal = {Journal of chemical theory and computation}, number = {10}, publisher = {American Chemical Society}, address = {Washington}, issn = {1549-9618}, doi = {10.1021/acs.jctc.8b00493}, pages = {5001 -- 5010}, year = {2018}, abstract = {Spectral density functions are central to the simulation of complex many body systems. Their determination requires making approximations not only to the dynamics but also to the underlying electronic structure theory. Here, blending different methods bears the danger of an inconsistent description. To solve this issue we propose an all-DFTB approach to determine spectral densities for the description of Frenkel excitons in molecular assemblies. The protocol is illustrated for a model of a PTCDI crystal, which involves the calculation of monomeric excitation energies and Coulomb couplings between monomer transitions, as well as their spectral distributions due to thermal fluctuations of the nuclei. Using dynamically defined normal modes, a mapping onto the standard harmonic oscillator spectral densities is achieved.}, language = {en} } @article{PilusoVukicevieNoecheletal.2018, author = {Piluso, Susanna and Vukicevie, Radovan and N{\"o}chel, Ulrich and Braune, Steffen and Lendlein, Andreas and Neffe, Axel T.}, title = {Sequential alkyne-azide cycloadditions for functionalized gelatin hydrogel formation}, series = {European polymer journal}, volume = {100}, journal = {European polymer journal}, publisher = {Elsevier}, address = {Oxford}, issn = {0014-3057}, doi = {10.1016/j.eurpolymj.2018.01.017}, pages = {77 -- 85}, year = {2018}, abstract = {While click chemistry reactions for biopolymer network formation are attractive as the defined reactions may allow good control of the network formation and enable subsequent functionalization, tailoring of gelatin network properties over a wide range of mechanical properties has yet to be shown. Here, it is demonstrated that copper-catalyzed alkyne-azide cycloaddition of alkyne functionalized gelatin with diazides gave hydrogel networks with properties tailorable by the ratio of diazide to gelatin and diazide rigidity. 4,4′-diazido-2,2′-stilbenedisulfonic acid, which has been used as rigid crosslinker, yielded hydrogels with Young's moduli E of 50-390 kPa and swelling degrees Q of 150-250 vol.\%, while the more flexible 1,8-diazidooctane resulted in hydrogels with E = 125-280 kPa and Q = 225-470 vol.\%. Storage moduli could be varied by two orders of magnitude (G′ = 100-20,000 Pa). An indirect cytotoxicity test did not show cytotoxic properties. Even when employing 1:1 ratios of alkyne and azide moieties, the hydrogels were shown to contain both, unreacted alkyne groups on the gelatin backbone as well as dangling chains carrying azide groups as shown by reaction with functionalized fluorescein. The free groups, which can be tailored by the employed ratio of the reactants, are accessible for covalent attachment of drugs, as was demonstrated by functionalization with dexamethasone. The sequential network formation and functionalization with click chemistry allows access to multifunctional materials relevant for medical applications.}, language = {en} } @article{PereiraZehbeGuenteretal.2018, author = {Pereira, Rui F. P. and Zehbe, Kerstin and G{\"u}nter, Christina and dos Santos, Tiago and Nunes, Silvia C. and Almeida Paz, Filipe A. and Silva, Maria M. and Granja, Pedro L. and Taubert, Andreas and de Zea Bermudez, Ver{\´o}nica}, title = {Ionic liquid-assisted synthesis of mesoporous silk fibroin/silica hybrids for biomedical applications}, series = {ACS Omega}, volume = {3}, journal = {ACS Omega}, number = {9}, publisher = {American Chemical Society}, address = {Washington}, issn = {2470-1343}, doi = {10.1021/acsomega.8b02051}, pages = {10811 -- 10822}, year = {2018}, abstract = {New mesoporous silk fibroin (SF)/silica hybrids were processed via a one-pot soft and energy-efficient sol-gel chemistry and self-assembly from a silica precursor, an acidic or basic catalyst, and the ionic liquid 1-butyl-3-methylimidazolium chloride, acting as both solvent and mesoporosity-inducer. The as-prepared materials were obtained as slightly transparent-opaque, amorphous monoliths, easily transformed into powders, and stable up to ca. 300 degrees C. Structural data suggest the formation of a hexagonal mesostructure with low range order and apparent surface areas, pore volumes, and pore radii of 205-263 m(2) g(-1), 0.16-0.19 cm(3) g(-1), and 1.2-1.6 nm, respectively. In all samples, the dominating conformation of the SF chains is the beta-sheet. Cytotoxicity/bioactivity resazurin assays and fluorescence microscopy demonstrate the high viability of MC3T3 pre-osteoblasts to indirect (>= 99 +/- 9\%) and direct (78 +/- 2 to 99 +/- 13\%) contact with the SF/silica materials. Considering their properties and further improvements, these systems are promising candidates to be explored in bone tissue engineering. They also offer excellent prospects as electrolytes for solid-state electrochemical devices, in particular for fuel cells.}, language = {en} } @article{PengBehlZhangetal.2018, author = {Peng, Xingzhou and Behl, Marc and Zhang, Pengfei and Mazurek-Budzynska, Magdalena and Feng, Yakai and Lendlein, Andreas}, title = {Synthesis of Well-Defined Dihydroxy Telechelics by (Co)polymerization of Morpholine-2,5-Diones Catalyzed by Sn(IV) Alkoxide}, series = {Macromolecular bioscience}, volume = {18}, journal = {Macromolecular bioscience}, number = {12}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1616-5187}, doi = {10.1002/mabi.201800257}, pages = {11}, year = {2018}, abstract = {Well-defined dihydroxy telechelic oligodepsipeptides (oDPs), which have a high application potential as building blocks for scaffold materials for tissue engineering applications or particulate carrier systems for drug delivery applications are synthesized by ring-opening polymerization (ROP) of morpholine-2,5-diones (MDs) catalyzed by 1,1,6,6-tetra-n-butyl-1,6-distanna-2,5,7,10-tetraoxacyclodecane (Sn(IV) alkoxide). In contrast to ROP catalyzed by Sn(Oct)(2), the usage of Sn(IV) alkoxide leads to oDPs, with less side products and well-defined end groups, which is crucial for potential pharmaceutical applications. A slightly faster reaction of the ROP catalyzed by Sn(IV) alkoxide compared to the ROP initiated by Sn(Oct)(2)/EG is found. Copolymerization of different MDs resulted in amorphous copolymers with T(g)s between 44 and 54 degrees C depending on the molar comonomer ratios in the range from 25\% to 75\%. Based on the well-defined telechelic character of the Sn(IV) alkoxide synthesized oDPs as determined by matrix-assisted laser desorption/ionization time of flight measurements, they resemble interesting building blocks for subsequent postfunctionalization or multifunctional materials based on multiblock copolymer systems whereas the amorphous oDP-based copolymers are interesting building blocks for matrices of drug delivery systems.}, language = {en} } @article{PazHeydenreichSchmidtetal.2018, author = {Paz, Cristian and Heydenreich, Matthias and Schmidt, Bernd and Vadra, Nahir and Baggio, Ricardo}, title = {Three new dihydro-beta-agarofuran sesquiterpenes from the seeds of Maytenus boaria}, series = {Acta Crystallographica Section C}, volume = {74}, journal = {Acta Crystallographica Section C}, publisher = {International Union of Crystallography}, address = {Chester}, issn = {2053-2296}, doi = {10.1107/S2053229618005429}, pages = {564 -- 570}, year = {2018}, abstract = {As part of a project studying the secondary metabolites extracted from the Chilean flora, we report herein three new beta-agarofuran sesquiterpenes, namely (1S,4S,5S,6R,7R,8R,9R,10S)-6-acetoxy-4,9-dihydroxy-2,2,5a,9-tetramethyloctahydro-2H-3,9a-methanobenzo[b] oxepine-5,10-diylbis(furan-3-carboxylate), C27H32O11, (II), (1S,4S,5S,6R,7R,9S,10S)-6-acetoxy-9-hydroxy-2,2,5a, 9-tetramethyloctahydro-2H-3,9a-methanobenzo[ b] oxepine-5,10-diyl bis(furan-3-carboxylate), C27H32O10, (III), and (1S,4S,5S,6R,7R,9S,10S)-6-acetoxy-10-(benzoyloxy)-9-hydroxy-2,2,5a,9-tetramethyloctahydro-2H-3,9a-methanobenzo[b]oxepin-5-yl furan-3-carboxylate, C29H34O9, (IV), obtained from the seeds of Maytenus boaria and closely associated with a recently published relative [Paz et al. (2017). Acta Cryst. C73, 451-457]. In the (isomorphic) structures of (II) and (III), the central decalin system is esterified with an acetate group at site 1 and furoate groups at sites 6 and 9, and differ at site 8, with an OH group in (II) and no substituent in (III). This position is also unsubstituted in (IV), with site 6 being occupied by a benzoate group. The chirality of the skeletons is described as 1S, 4S, 5S, 6R, 7R, 8R, 9R, 10S in (II) and 1S, 4S, 5S, 6R, 7R, 9S, 10S in (III) and (IV), matching the chirality suggested by NMR studies. This difference in the chirality sequence among the title structures (in spite of the fact that the three skeletons are absolutely isostructural) is due to the differences in the environment of site 8, i.e. OH in (II) and H in (III) and (IV). This diversity in substitution, in turn, is responsible for the differences in the hydrogen-bonding schemes, which is discussed.}, language = {en} } @article{ParamonovKlamrothLuetal.2018, author = {Paramonov, Guennaddi K. and Klamroth, Tillmann and Lu, H. Z. and Bandrauk, Andre D.}, title = {Quantum dynamics, isotope effects, and power spectra of H-2(+) and HD+ excited to the continuum by strong one-cycle laser pulses: Three-dimensional non-Born-Oppenheimer simulations}, series = {Physical review : A, Atomic, molecular, and optical physics}, volume = {98}, journal = {Physical review : A, Atomic, molecular, and optical physics}, number = {6}, publisher = {American Physical Society}, address = {College Park}, issn = {2469-9926}, doi = {10.1103/PhysRevA.98.063431}, pages = {16}, year = {2018}, abstract = {Non-Born-Oppenheimer quantum dynamics of H-2(+) and HD+ excited by single one-cycle laser pulses linearly polarized along the molecular (z) axis have been studied within a three-dimensional model, including the internuclear distance R and electron coordinates z and rho, by means of the numerical solution of the time-dependent Schrodinger equation on the timescale of about 200 fs. Laser carrier frequencies corresponding to the wavelengths of lambda(l) = 400 and 50 nm have been used and the amplitudes of the pulses have been chosen such that the energies of H-2(+) and HD+ are above the dissociation threshold after the ends of the laser pulses. It is shown that excitation of H-2(+) and HD+ above the dissociation threshold is accompanied by formation of vibrationally "hot" and "cold" ensembles of molecules. Dissociation of vibrationally "hot" molecules does not prevent the appearance of post-laser-pulse electronic oscillations, parallel z oscillations, and transversal rho oscillations. Moreover, dissociation of "hot" molecules does not influence characteristic frequencies of electronic z and rho oscillations. The main difference between the laser-induced quantum dynamics of homonuclear H-2(+) and its heteronuclear isotope HD+ is that fast post-laser-pulse electronic z oscillations in H-2(+) are regularly shaped with the period of tau(shp) approximate to 30 fs corresponding to nuclear oscillations in H-2(+), while electronic z oscillations in HD+ arise as "echo pulses" of its initial excitation and appear with the period of tau(echo) approximate to 80 fs corresponding to nuclear motion in HD+. Accordingly, corresponding power spectra of nuclear motion contain strong low-frequency harmonics at omega(shp) = 2 pi/tau(shp) in H2(+) and omega(echo) = 2 pi/tau(echo) in HD+. Power spectra related to both electronic and nuclear motion have been calculated in the acceleration form. Both higher- and lower-order harmonics are generated at the laser wavelength lambda(l) = 400 nm, while only lower-order harmonics are well pronounced at lambda(l) = 50 nm. It is also shown that a rationalized harmonic order, defined in terms of the frequency of the laser-induced electronic z oscillations, agrees with the concept of inversion symmetry for electronic motion in diatomic molecules.}, language = {en} } @article{PaillesSylvestreEscobaretal.2018, author = {Pailles, Christine and Sylvestre, Florence and Escobar, Jaime and Tonetto, Alain and Rustig, Sybille and Mazur, Jean-Charles}, title = {Cyclotella petenensis and Cyclotella cassandrae, two new fossil diatoms from Pleistocene sediments of Lake Peten-Itza, Guatemala, Central America}, series = {Phytotaxa : a rapid international journal for accelerating the publication of botanical taxonomy}, volume = {351}, journal = {Phytotaxa : a rapid international journal for accelerating the publication of botanical taxonomy}, number = {4}, publisher = {Magnolia Press}, address = {Auckland}, issn = {1179-3155}, doi = {10.11646/phytotaxa.351.4.1}, pages = {247 -- 263}, year = {2018}, abstract = {While analyzing the fossil diatom flora in one of the longest paleolimnological records (core PI-6) from Lake Peten-Itza, lowland Guatemala, we encountered Aulacoseira Thwaites, Cyclotella (Kutzing) and Discostella (Cleve \& Grunow) Houk \& Klee species appearing successively in the record. Among them, two new species that are assigned to the genus Cyclotella are described herein. Cyclotella petenensis sp. nov. is characterised by a coarse striation marked by a shadow line and a tangentially undulate central area with an arc of central fultoportulae. Cyclotella cassandrae sp. nov. has an elliptically shaped valve, coarse striae and a scattered ring of central fultoportulae in the central area. Classification and differences to similar taxa in the genus Cyclotella are discussed.}, language = {en} } @article{NoackSchanzenbachKoetzetal.2018, author = {Noack, Sebastian and Schanzenbach, Dirk and Koetz, Joachim and Schlaad, Helmut}, title = {Polylactide-based amphiphilic block copolymers}, series = {Macromolecular rapid communications}, volume = {40}, journal = {Macromolecular rapid communications}, number = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1022-1336}, doi = {10.1002/marc.201800639}, pages = {6}, year = {2018}, abstract = {The aqueous self-assembly behavior of a series of poly(ethylene glycol)-poly(l-/d-lactide) block copolymers and corresponding stereocomplexes is examined by differential scanning calorimetry, dynamic light scattering, and transmission electron microscopy. Block copolymers assemble into spherical micelles and worm-like aggregates at room temperature, whereby the fraction of the latter seemingly increases with decreasing lactide weight fraction or hydrophobicity. The formation of the worm-like aggregates arises from the crystallization of the polylactide by which the spherical micelles become colloidally unstable and fuse epitaxically with other micelles. The self-assembly behavior of the stereocomplex aggregates is found to be different from that of the block copolymers, resulting in rather irregular-shaped clusters of spherical micelles and pearl-necklace-like structures.}, language = {en} } @phdthesis{Nizardo2018, author = {Nizardo, Noverra Mardhatillah}, title = {Thermoresponsive block copolymers with UCST-behavior aimed at biomedical environments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-412217}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 134}, year = {2018}, abstract = {Thermoresponsive block copolymers of presumably highly biocompatible character exhibiting upper critical solution temperature (UCST) type phase behavior were developed. In particular, these polymers were designed to exhibit UCST-type cloud points (Tcp) in physiological saline solution (9 g/L) within the physiologically interesting window of 30-50°C. Further, their use as carrier for controlled release purposes was explored. Polyzwitterion-based block copolymers were synthesized by atom transfer radical polymerization (ATRP) via a macroinitiator approach with varied molar masses and co-monomer contents. These block copolymers can self-assemble in the amphiphilic state to form micelles, when the thermoresponsive block experiences a coil-to-globule transition upon cooling. Poly(ethylene glycol) methyl ether (mPEG) was used as the permanently hydrophilic block to stabilize the colloids formed, and polyzwitterions as the thermoresponsive block to promote the temperature-triggered assembly-disassembly of the micellear aggregates at low temperature. Three zwitterionic monomers were used for this studies, namely 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate (SPE), 4-((2-(methacryloyl- oxy)ethyl)dimethylammonio)butane-1-sulfonate (SBE), and 3-((2-(methacryloyloxy)ethyl)- dimethylammonio)propane-1-sulfate) (ZPE). Their (co)polymers were characterized with respect to their molecular structure by proton nuclear magnetic resonance (1H-NMR) and gel permeation chromatography (GPC). Their phase behaviors in pure water as well as in physiological saline were studied by turbidimetry and dynamic light scattering (DLS). These (co)polymers are thermoresponsive with UCST-type phase behavior in aqueous solution. Their phase transition temperatures depend strongly on the molar masses and the incorporation of co-monomers: phase transition temperatures increased with increasing molar masses and content of poorly water-soluble co-monomer. In addition, the presence of salt influenced the phase transition dramatically. The phase transition temperature decreased with increasing salt content in the solution. While the PSPE homopolymers show a phase transition only in pure water, the PZPE homopolymers are able to exhibit a phase transition only in high salinity, as in physiological saline. Although both polyzwitterions have similar chemical structures that differ only in the anionic group (sulfonate group in SPE and sulfate group in ZPE), the water solubility is very different. Therefore, the phase transition temperatures of targeted block copolymers were modulated by using statistical copolymer of SPE and ZPE as thermoresponsive block, and varying the ratio of SPE to ZPE. Indeed, the statistical copolymers of P(SPE-co-ZPE) show phase transitions both in pure water as well as in physiological saline. Surprisingly, it was found that mPEG-b-PSBE block copolymer can display "schizophrenic" behavior in pure water, with the UCST-type cloud point occurring at lower temperature than the LCST-type one. The block copolymer, which satisfied best the boundary conditions, is block copolymer mPEG114-b-P(SPE43-co-ZPE39) with a cloud point of 45°C in physiological saline. Therefore, it was chosen for solubilization studies of several solvatochromic dyes as models of active agents, using the thermoresponsive block copolymer as "smart" carrier. The uptake and release of the dyes were explored by UV-Vis and fluorescence spectroscopy, following the shift of the wavelength of the absorbance or emission maxima at low and high temperature. These are representative for the loaded and released state, respectively. However, no UCST-transition triggered uptake and release of these dyes could be observed. Possibly, the poor affinity of the polybetaines to the dyes in aqueous environtments may be related to the widely reported antifouling properties of zwitterionic polymers.}, language = {en} } @article{NguyenLeeAudoerschetal.2018, author = {Nguyen, Hiep N. and Lee, Hyeunjoo and Aud{\"o}rsch, Stephan and Reznichenko, Alexander L. and Nawara-Hultzsch, Agnieszka J. and Schmidt, Bernd and Hultzsch, Kai C.}, title = {Asymmetric Intra- and Intermolecular Hydroamination Catalyzed by 3,3′-Bis(trisarylsilyl)- and 3,3′-Bis(arylalkylsilyl)-Substituted Binaphtholate Rare-Earth-Metal Complexes}, series = {Organometallics}, volume = {37}, journal = {Organometallics}, number = {23}, publisher = {American Chemical Society}, address = {Washington}, issn = {0276-7333}, doi = {10.1021/acs.organomet.8b00510}, pages = {4358 -- 4379}, year = {2018}, abstract = {The series of novel 3,3′-bis(trisarylsilyl)- and 3,3′-bis(arylalkylsilyl)-substituted binaphtholate rare-earth-metal complexes 2a-i (SiR3 = Si(o-biphenylene)Ph (a), SiCyPh2 (b), Si-t-BuPh2 (c), Si(i-Pr)3 (d), SiCy2Ph (e), Si(2-tolyl)Ph2 (f), Si(4-t-Bu-C6H4)3 (g), Si(4-MeO-C6H4)Ph2 (h), SiBnPh2 (i)) have been prepared via arene elimination from [Ln(o-C6H4CH2NMe2)3] (Ln = Y, Lu) and the corresponding 3,3′-bis(silyl)-substituted binaphthol. The complexes exhibit high catalytic activity in the hydroamination/cyclization of aminoalkenes, with activities exceeding 1000 h-1 for (R)-2f-Ln, (R)-2g-Ln, and (R)-2h-Ln in the cyclization of 2,2-diphenylpent-4-enylamine (3a) at 25 °C, while the rigid dibenzosilole-substituted complexes (R)-2a-Ln and the triisopropylsilyl-substituted complexes (R)-2d-Ln exhibited the lowest activity in the range of 150-270 h-1. Catalysts (R)-2b-Lu, (R)-2c-Lu, (R)-2f-Lu, and (R)-2i-Lu provide the highest selectivities for the majority of the substrates, while the yttrium congeners are usually less selective. The highest enantioselectivities of 96\% ee were observed using (R)-2a-Lu and (R)-2c-Lu in the cyclization of (4E)-2,2,5-triphenylpent-4-enylamine (9). The reactions show apparently zero-order rate dependence on substrate concentration and first-order rate dependence on catalyst concentration, with some reactions exhibiting a slightly accelerated rate at high conversion due to a shift in the equilibrium between a less active, higher coordinate catalyst species in favor of a more active, lower coordinate species as a result of weaker binding of the hydroamination product in comparison to the aminoalkene substrate. The shift in equilibrium from the higher to the lower coordinate species is also entropically favored at elevated temperatures, which results in an unusual increase in selectivity in the cyclization of 2,2-dimethylpent-4-enylamine (3d), presumably due to a higher selectivity of the lower coordinate catalyst species. All binaphtholate yttrium complexes, except (R)-2a-Y, are catalytically active in the intermolecular hydroamination of benzylamines with terminal alkenes. The highest selectivity of 66\% ee was observed for the reaction of benzylamine with 4-phenyl-1-butene using (R)-2h-Y at 110 °C.}, language = {en} } @phdthesis{Muenzberg2018, author = {M{\"u}nzberg, Marvin}, title = {Inline-Untersuchung der Tr{\"u}bung und Partikelgr{\"o}ße von hochkonzentrierten Dispersionen mit Lichtstreutechniken}, school = {Universit{\"a}t Potsdam}, pages = {85}, year = {2018}, language = {de} } @article{MuzdaloSaalfrankVreedeetal.2018, author = {Muzdalo, Anja and Saalfrank, Peter and Vreede, Jocelyne and Santer, Mark}, title = {Cis-to-Trans Isomerization of Azobenzene Derivatives Studied with Transition Path Sampling and Quantum Mechanical/Molecular Mechanical Molecular Dynamics}, series = {Journal of chemical theory and computation}, volume = {14}, journal = {Journal of chemical theory and computation}, number = {4}, publisher = {American Chemical Society}, address = {Washington}, issn = {1549-9618}, doi = {10.1021/acs.jctc.7b01120}, pages = {2042 -- 2051}, year = {2018}, abstract = {Azobenzene-based molecular photoswitches are becoming increasingly important for the development of photoresponsive, functional soft-matter material systems. Upon illumination with light, fast interconversion between a more stable trans and a metastable cis configuration can be established resulting in pronounced changes in conformation, dipole moment or hydrophobicity. A rational design of functional photosensitive molecules with embedded azo moieties requires a thorough understanding of isomerization mechanisms and rates, especially the thermally activated relaxation. For small azo derivatives considered in the gas phase or simple solvents, Eyring's classical transition state theory (TST) approach yields useful predictions for trends in activation energies or corresponding half-life times of the cis isomer. However, TST or improved theories cannot easily be applied when the azo moiety is part of a larger molecular complex or embedded into a heterogeneous environment, where a multitude of possible reaction pathways may exist. In these cases, only the sampling of an ensemble of dynamic reactive trajectories (transition path sampling, TPS) with explicit models of the environment may reveal the nature of the processes involved. In the present work we show how a TPS approach can conveniently be implemented for the phenomenon of relaxation-isomerization of azobenzenes starting with the simple examples of pure azobenzene and a push-pull derivative immersed in a polar (DMSO) and apolar (toluene) solvent. The latter are represented explicitly at a molecular mechanical (MM) and the azo moiety at a quantum mechanical (QM) level. We demonstrate for the push-pull azobenzene that path sampling in combination with the chosen QM/MM scheme produces the expected change in isomerization pathway from inversion to rotation in going from a low to a high permittivity (explicit) solvent model. We discuss the potential of the simulation procedure presented for comparative calculation of reaction rates and an improved understanding of activated states.}, language = {en} } @article{MuivaMutisyaAtilawHeydenreichetal.2018, author = {Muiva-Mutisya, Lois M. and Atilaw, Yoseph and Heydenreich, Matthias and Koch, Andreas and Akala, Hoseah M. and Cheruiyot, Agnes C. and Brown, Matthew L. and Irungu, Beatrice and Okalebo, Faith A. and Derese, Solomon and Mutai, Charles and Yenesew, Abiy}, title = {Antiplasmodial prenylated flavanonols from Tephrosia subtriflora}, series = {Natural Product Research}, volume = {32}, journal = {Natural Product Research}, number = {12}, publisher = {Routledge, Taylor \& Francis Group}, address = {Abingdon}, issn = {1478-6419}, doi = {10.1080/14786419.2017.1353510}, pages = {1407 -- 1414}, year = {2018}, abstract = {The CH2Cl2/MeOH (1:1) extract of the aerial parts of Tephrosia subtriflora afforded a new flavanonol, named subtriflavanonol (1), along with the known flavanone spinoflavanone B, and the known flavanonols MS-II (2) and mundulinol. The structures were elucidated by the use of NMR spectroscopy and mass spectrometry. The absolute configuration of the flavanonols was determined based on quantum chemical ECD calculations. In the antiplasmodial assay, compound 2 showed the highest activity against chloroquine-sensitive Plasmodiumfalciparum reference clones (D6 and 3D7), artemisinin-sensitive isolate (F32-TEM) as well as field isolate (KSM 009) with IC50 values 1.4-4.6M without significant cytotoxicity against Vero and HEp2 cell lines (IC50>100M). The new compound (1) showed weak antiplasmodial activity, IC50 12.5-24.2M, but also showed selective anticancer activity against HEp2 cell line (CC50 16.9M). [GRAPHICS] .}, language = {en} } @misc{MotaCoelhoLeimkuehleretal.2018, author = {Mota, Cristiano and Coelho, Catarina and Leimk{\"u}hler, Silke and Garattini, Enrico and Terao, Mineko and Santos-Silva, Teresa and Romao, Maria Joao}, title = {Critical overview on the structure and metabolism of human aldehyde oxidase and its role in pharmacokinetics}, series = {Coordination chemistry reviews}, volume = {368}, journal = {Coordination chemistry reviews}, publisher = {Elsevier}, address = {Lausanne}, issn = {0010-8545}, doi = {10.1016/j.ccr.2018.04.006}, pages = {35 -- 59}, year = {2018}, abstract = {Aldehyde oxidases are molybdenum and flavin dependent enzymes characterized by a very wide substrate specificity and performing diverse reactions that include oxidations (e.g., aldehydes and azaheterocycles), hydrolysis of amide bonds, and reductions (e.g., nitro, S-oxides and N-oxides). Oxidation reactions and amide hydrolysis occur at the molybdenum site while the reductions are proposed to occur at the flavin site. AOX activity affects the metabolism of different drugs and xenobiotics, some of which designed to resist other liver metabolizing enzymes (e.g., cytochrome P450 monooxygenase isoenzymes), raising its importance in drug development. This work consists of a comprehensive overview on aldehyde oxidases, concerning the genetic evolution of AOX, its diversity among the human population, the crystal structures available, the known catalytic reactions and the consequences in pre-clinical pharmacokinetic and pharmacodynamic studies. Analysis of the different animal models generally used for pre-clinical trials and comparison between the human (hAOX1), mouse homologs as well as the related xanthine oxidase (XOR) are extensively considered. The data reviewed also include a systematic analysis of representative classes of molecules that are hAOX1 substrates as well as of typical and well characterized hAOX1 inhibitors. The considerations made on the basis of a structural and functional analysis are correlated with reported kinetic and metabolic data for typical classes of drugs, searching for potential structural determinants that may dictate substrate and/or inhibitor specificities.}, language = {en} } @article{MertensHilschHaralampievetal.2018, author = {Mertens, Monique and Hilsch, Malte and Haralampiev, Ivan and Volkmer, Rudolf and Wessig, Pablo and M{\"u}ller, Peter}, title = {Synthesis and characterization of a new Bifunctionalized, Fluorescent, and Amphiphilic molecule for recruiting SH-Containing molecules to membranes}, series = {ChemBioChem}, volume = {19}, journal = {ChemBioChem}, number = {15}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1439-4227}, doi = {10.1002/cbic.201800268}, pages = {1643 -- 1647}, year = {2018}, abstract = {This study describes the synthesis and characterization of an amphiphilic construct intended to recruit SH-containing molecules to membranes. The construct consists of 1)an aliphatic chain to enable anchoring within membranes, 2)a maleimide moiety to react with the sulfhydryl group of a soluble (bio)molecule, and 3)a fluorescence moiety to allow the construct to be followed by fluorescence spectroscopy and microscopy. It is shown that the construct can be incorporated into preformed membranes, thus allowing application of the approach with biological membranes. The close proximity between the fluorophore and the maleimide moiety within the construct causes fluorescence quenching. This allows monitoring of the reaction with SH-containing molecules by measurement of increases in fluorescence intensity and lifetime. Notably, the construct distributes into laterally ordered membrane domains of lipid vesicles, which is probably triggered by the length of its membrane anchor. The advantages of the new construct can be employed for several biological, biotechnological, and medicinal applications.}, language = {en} } @article{MelaniNagataWirthetal.2018, author = {Melani, Giacomo and Nagata, Yuki and Wirth, Jonas and Saalfrank, Peter}, title = {Vibrational spectroscopy of hydroxylated alpha-Al2O3(0001) surfaces with and without water}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, volume = {149}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, number = {1}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0021-9606}, doi = {10.1063/1.5023347}, pages = {10}, year = {2018}, abstract = {Using gradient- and dispersion-corrected density functional theory in connection with ab initio molecular dynamics and efficient, parametrized Velocity-Velocity Autocorrelation Function (VVAF) methodology, we study the vibrational spectra (Vibrational Sum Frequency, VSF, and infrared, IR) of hydroxylated alpha-Al2O3(0001) surfaces with and without additional water. Specifically, by considering a naked hydroxylated surface and the same surface with a particularly stable, "ice-like" hexagonal water later allows us to identify and disentangle main spectroscopic bands of OH bonds, their orientation and dynamics, and the role of water adsorption. In particular, we assign spectroscopic signals around 3700 cm(-1) as being dominated by perpendicularly oriented non-hydrogen bonded aluminol groups, with and without additional water. Furthermore, the thin water layer gives spectroscopic signals which are already comparable to previous theoretical and experimental findings for the solid/(bulk) liquid interface, showing that water molecules closest to the surface play a decisive role in the vibrational response of these systems. From a methodological point of view, the effects of temperature, anharmonicity, hydrogen-bonding, and structural dynamics are taken into account and analyzed, allowing us to compare the calculated IR and VSF spectra with the ones based on normal mode analysis and vibrational density of states. The VVAF approach employed in this work appears to be a computationally accurate yet feasible method to address the vibrational fingerprints and dynamical properties of water/metal oxide interfaces. Published by AIP Publishing.}, language = {en} } @article{MeilingSchuermannVogeletal.2018, author = {Meiling, Till Thomas and Sch{\"u}rmann, Robin Mathis and Vogel, Stefanie and Ebel, Kenny and Nicolas, Christophe and Milosavljevic, Aleksandar R. and Bald, Ilko}, title = {Photophysics and Chemistry of Nitrogen-Doped Carbon Nanodots with High Photoluminescence Quantum Yield}, series = {The journal of physical chemistry : C, Nanomaterials and interfaces}, volume = {122}, journal = {The journal of physical chemistry : C, Nanomaterials and interfaces}, number = {18}, publisher = {American Chemical Society}, address = {Washington}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.8b00748}, pages = {10217 -- 10230}, year = {2018}, abstract = {Fluorescent carbon nanodots (CNDs) are very promising nanomaterials for a broad range of applications because of their high photostability, presumed selective luminescence, and low cost at which they can be produced. In this respect, CNDs are superior to well-established semiconductor quantum dots and organic dyes. However, reported synthesis protocols for CNDs typically lead to low photoluminescence quantum yield (PLQY) and low reproducibility, resulting in a poor understanding of the CND chemistry and photophysics. Here, we report a one-step synthesis of nitrogen-doped carbon nanodots (N-CNDs) from various carboxylic acids, Tris, and ethylenediaminetetraacetic acid resulting in high PLQY of up to 90\%. The reaction conditions in terms of starting materials, temperature, and reaction time are carefully optimized and their influence on the photophysical properties is characterized. We find that citric acid-derived N-CNDs can result in a very high PLQY of 90\%, but they do not show selective luminescence. By contrast, acetic acid-derived N-CNDs show selective luminescence but a PLQY of 50\%. The chemical composition of the surface and core of these two selected N-CND types is characterized among others by high-resolution synchrotron X-ray photoelectron spectroscopy using single isolated N-CND clusters. The results indicate that photoexcitation occurs in the N-CND core, whereas the emission properties are determined by the N-CND surface groups.}, language = {en} } @article{MeilingCywinskiLoehmannsroeben2018, author = {Meiling, Till Thomas and Cywinski, Piotr J. and L{\"o}hmannsr{\"o}ben, Hans-Gerd}, title = {Two-Photon excitation fluorescence spectroscopy of quantum dots}, series = {The journal of physical chemistry : C, Nanomaterials and interfaces}, volume = {122}, journal = {The journal of physical chemistry : C, Nanomaterials and interfaces}, number = {17}, publisher = {American Chemical Society}, address = {Washington}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.7b12345}, pages = {9641 -- 9647}, year = {2018}, abstract = {The applications of quantum dots (QDs) in two-photon (2P) excitation applications demand reliable data about their 2P absorption (2PA) cross sections (sigma(2PA)). In the present study, sigma(2PA) values have been determined for a series of commercial colloidal CdSe/ZnS QDs and CdSeTe/ZnS QDs in aqueous media. For the first time for these QDs, the sigma(2PA) values have been determined over a wide spectral range, that is, between 720 and 900 nm, and are compared to the extinction coefficient (epsilon) values obtained under one-photon (1P) excitation. Furthermore, we present a QD in combination with an organic dye in a biotin-streptavidin Forster resonance energy transfer bioassay under 1P and 2P excitation. The results for the bioassay under 2P excitation are compared to those obtained under 1P excitation. The results demonstrate that in the case of the 2P excitation, higher sensitivity can be achieved because of an improved signal-to-noise ratio.}, language = {en} } @misc{MehrabiSchulzMuellerWerkmeisteretal.2018, author = {Mehrabi, Pedram and Schulz, Eike and M{\"u}ller-Werkmeister, Henrike and Persch, Elke and De Gasparo, Raoul and Diederich, Francois and Tellkamp, Friedjof and Pai, Emil F. and Miller, R. J. Dwayne}, title = {Time-resolved crystallography via an interlacing approach allows elucidation of milliseconds to seconds time delays}, series = {Acta Crystallographica Section A}, volume = {74}, journal = {Acta Crystallographica Section A}, publisher = {International Union of Crystallography}, address = {Chester}, issn = {2053-2733}, doi = {10.1107/S205327331809321X}, pages = {E138 -- E138}, year = {2018}, language = {en} } @misc{MazzioThulasimaniRylletal.2018, author = {Mazzio, Katherine A. and Thulasimani, Monika Raja and Ryll, Britta and Kojda, Sandrino Danny and Habicht, Klaus and Raoux, Simone}, title = {Synthetic manipulation of hybrid thermoelectric materials}, series = {Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS}, volume = {255}, journal = {Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS}, publisher = {American Chemical Society}, address = {Washington}, issn = {0065-7727}, pages = {1}, year = {2018}, language = {en} }