@misc{HoernerLauKantoretal.2004,
author = {H{\"o}rner, Gerald and Lau, Steffen and Kantor, Zoltan and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
title = {Isotope selective analysis of CO2 with tunable diode laser (TDL) spectroscopy in the NIR},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10167},
year = {2004},
abstract = {The performance of a home-built tunable diode laser (TDL) spectrometer, aimed at multi-line detection of carbon dioxide, has been evaluated and optimized. In the regime of the (3001)III / (000) band of 12CO2 around 1.6 μm, the dominating isotope species 12CO2, 13CO2, and 12C18O16O were detected simultaneously without interference by water vapor. Detection limits in the range of few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. High sensitivity in conjunction with high precision —typically ±1 per mille and ±6 per mille for 3\% and 0.7\% of CO2, respectively— renders this experimental approach a promising analytical concept for isotope-ratio determination of carbon dioxide in soil and breath gas. For a moderate 12CO2 line, the pressure dependence of the line profile was characterized in detail, to account for pressure effects on sensitive measurements.},
subject = {Isotopenverh{\"a}ltnis},
language = {en}
}
@misc{NiederkruegerSalbBecketal.2006,
author = {Niederkr{\"u}ger, Matthias and Salb, Christian and Beck, Michael and Hildebrandt, Niko and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Marowsky, Gerd},
title = {Improvement of a fluorescence immunoassay with a compact diode-pumped solid state laser at 315 nm},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10150},
year = {2006},
abstract = {We demonstrate the improvement of fluorescence immunoassay (FIA) diagnostics in deploying a newly developed compact diode-pumped solid state (DPSS) laser with emission at 315 nm. The laser is based on the quasi-three-level transition in Nd:YAG at 946 nm. The pulsed operation is either realized by an active Q-switch using an electro-optical device or by introduction of a Cr4+:YAG saturable absorber as passive Q-switch element. By extra-cavity second harmonic generation in different nonlinear crystal media we obtained blue light at 473 nm. Subsequent mixing of the fundamental and the second harmonic in a β-barium-borate crystal provided pulsed emission at 315 nm with up to 20 μJ maximum pulse energy and 17 ns pulse duration. Substitution of a nitrogen laser in a FIA diagnostics system by the DPSS laser succeeded in considerable improvement of the detection limit. Despite significantly lower pulse energies (7 μJ DPSS laser versus 150 μJ nitrogen laser), in preliminary investigations the limit of detection was reduced by a factor of three for a typical FIA.},
subject = {Immunoassay},
language = {en}
}
@misc{HoernerLauLoehmannsroeben2004,
author = {H{\"o}rner, Gerald and Lau, Steffen and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
title = {NIR-diode laser spectroscopy for isotope-selective sensing of soil-respired carbon dioxide},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10148},
year = {2004},
abstract = {The performance of a home-built tunable diode laser (TDL) spectrometer has been optimized regarding multi-line detection of carbon dioxide in natural gases. In the regime of the (3001)III ← (000) band of 12CO2 around 1.6 μm, the dominating isotope species 12CO2, 13CO2, and 12C18O16O were detected simultaneously. In contrast to most established techniques, selective measurements are performed without any sample preparation. This is possible since the CO2 detection is free of interference from water, ubiquitous in natural gases. Detection limits in the range of a few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. Linear calibration plots cover a dynamic range of four orders of magnitude, allowing for quantitative CO2 detection in various samples, like soil and breath gas. High isotopic resolution enables the excellent selectivity, sensitivity, and stability of the chosen analytical concept. The obtained isotopic resolution of typically ± 1.0 per mille and ± 1.5 per mille (for 3 vol. \% and 0.7 vol. \% of CO2, respectively) offers a promising analytical tool for isotope-ratio determination of carbon dioxide in soil gas. Preliminary experiments on soil respiration for the first time combine the on-line quantification of the overall carbon dioxide content with an optode sensor and isotopic determination (TDL system) of natural gas species.},
subject = {Kohlendioxid},
language = {en}
}
@misc{LauSalffnerLoehmannsroeben2006,
author = {Lau, Steffen and Salffner, Katharina and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
title = {Isotopic resolution of carbon monoxide and carbon dioxide by NIR diode laser spectroscopy},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10135},
year = {2006},
abstract = {Near-infrared (NIR) absorption spectroscopy with tunable diode lasers allows the simultaneous detection of the three most important isotopologues of carbon dioxide (12CO2, 13CO2, 12C18O16O) and carbon monoxide (12CO, 13CO, 12C18O). The flexible and compact fiber-optic tunable diode laser absorption spectrometer (TDLAS) allows selective measurements of CO2 and CO with high isotopic resolution without sample preparation since there is no interference with water vapour. For each species, linear calibration plots with a dynamic range of four orders of magnitude and detection limits (LOD) in the range of a few ppm were obtained utilizing wavelength modulation spectroscopy (WMS) with balanced detection in a Herriott-type multipass cell. The high performance of the apparatus is illustrated by fill-evacuation-refill cycles.},
subject = {Isotop},
language = {en}
}
@misc{LoehmannsroebenBeckHildebrandtetal.2006,
author = {L{\"o}hmannsr{\"o}ben, Hans-Gerd and Beck, Michael and Hildebrandt, Niko and Schm{\"a}lzlin, Elmar and van Dongen, Joost T.},
title = {New challenges in biophotonics : laser-based fluoroimmuno analysis and in-vivo optical oxygen monitoring},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10120},
year = {2006},
abstract = {Two examples of our biophotonic research utilizing nanoparticles are presented, namely laser-based fluoroimmuno analysis and in-vivo optical oxygen monitoring. Results of the work include significantly enhanced sensitivity of a homogeneous fluorescence immunoassay and markedly improved spatial resolution of oxygen gradients in root nodules of a legume species.},
subject = {Sauerstoff},
language = {en}
}
@phdthesis{Ba2006,
author = {Ba, Jianhua},
title = {Nonaqueous synthesis of metal oxide nanoparticles and their assembly into mesoporous materials},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10173},
school = {Universit{\"a}t Potsdam},
year = {2006},
abstract = {This thesis mainly consist of two parts, the synthesis of several kinds of technologically interesting crystalline metal oxide nanoparticles via nonaqueous sol-gel process and the formation of mesoporous metal oxides using some of these nanoparticles as building blocks via evaporation induced self-assembly (EISA) technique. In the first part, the experimental procedures and characterization results of successful syntheses of crystalline tin oxide and tin doped indium oxide (ITO) nanoparticles are reported. SnO2 nanoparticles exhibit monodisperse particle size (3.5 nm in average), high crystallinity and particularly high dispersibility in THF, which enable them to become the ideal particulate precursor for the formation of mesoporous SnO2. ITO nanoparticles possess uniform particle morphology, narrow particle size distribution (5-10 nm), high crystallinity as well as high electrical conductivity. The synthesis approaches and characterization of various mesoporous metal oxides, including TiO2, SnO2, mixture of CeO2 and TiO2, mixture of BaTiO3 and SnO2, are reported in the second part of this thesis. Mesoporous TiO2 and SnO2 are presented as highlights of this part. Mesoporous TiO2 was produced in the forms of both films and bulk material. In the case of mesoporous SnO2, the study was focused on the high order of the porous structure. All these mesoporous metal oxides show high crystallinity, high surface area and rather monodisperse pore sizes, which demonstrate the validity of EISA process and the usage of preformed crystalline nanoparticles as nanobuilding blocks (NBBs) to produce mesoporous metal oxides.},
subject = {Nanopartikel},
language = {en}
}
@misc{BeckHildebrandtLoehmannsroeben2006,
author = {Beck, Michael and Hildebrandt, Niko and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
title = {Quantum dots as acceptors in FRET-assays containing serum},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-9504},
year = {2006},
abstract = {Quantum dots (QDs) are common as luminescing markers for imaging in biological applications because their optical properties seem to be inert against their surrounding solvent. This, together with broad and strong absorption bands and intense, sharp tuneable luminescence bands, makes them interesting candidates for methods utilizing F{\"o}rster Resonance Energy Transfer (FRET), e. g. for sensitive homogeneous fluoroimmunoassays (FIA). In this work we demonstrate energy transfer from Eu3+-trisbipyridin (Eu-TBP) donors to CdSe-ZnS-QD acceptors in solutions with and without serum. The QDs are commercially available CdSe-ZnS core-shell particles emitting at 655 nm (QD655). The FRET system was achieved by the binding of the streptavidin conjugated donors with the biotin conjugated acceptors. After excitation of Eu-TBP and as result of the energy transfer, the luminescence of the QD655 acceptors also showed lengthened decay times like the donors. The energy transfer efficiency, as calculated from the decay times of the bound and the unbound components, amounted to 37\%. The F{\"o}rster-radius, estimated from the absorption and emission bands, was ca. 77 {\AA}. The effective binding ratio, which not only depends on the ratio of binding pairs but also on unspecific binding, was obtained from the donor emission dependent on the concentration. As serum promotes unspecific binding, the overall FRET efficiency of the assay was reduced. We conclude that QDs are good substitutes for acceptors in FRET if combined with slow decay donors like Europium. The investigation of the influence of the serum provides guidance towards improving binding properties of QD assays.},
subject = {Quantenpunkt},
language = {en}
}
@phdthesis{Bhattacharryya2006,
author = {Bhattacharryya, Saroj Kumar},
title = {Development of detector for analytical ultracentrifuge. - [korr. Fassung]},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-8215},
school = {Universit{\"a}t Potsdam},
year = {2006},
abstract = {In this work approaches for new detection system development for an Analytical Ultracentrifuge (AUC) were explored. Unlike its counterpart in chromatography fractionation techniques, the use of a Multidetection system for AUC has not yet been implemented to full extent despite its potential benefit. In this study we tried to couple existing fundamental spectroscopic and scattering techniques that are used in day to day science as tool for extracting analyte information. Trials were performed for adapting Raman, Light scattering and UV/Vis (with possibility to work with the whole range of wavelengths) to AUC. Conclusions were drawn for Raman and Light scattering to be a possible detection system for AUC, while the development for a fast fiber optics based multiwavelength detector was completed. The multiwavelength detector demonstrated the capability of data generation matching the literature and reference measurement data and faster data collection than that of the commercial instrument. It became obvious that with the generation of data in 3-D space in the UV/Vis detection system, the user can select the wavelength for the evaluation of experimental results as the data set contains the whole range of information from UV/Vis wavelength. The detector showed the data generation with much faster speed unlike the commercial instruments. The advantage of fast data generation was exemplified with the evaluation of data for a mixture of three colloids. These data were in conformity with measurement results from normal radial experiments and without significant diffusion broadening. Thus conclusions were drawn that with our designed Multiwavelength detector, meaningful data in 3-D space can be collected with much faster speed of data generation.},
subject = {Ultrazentrifuge},
language = {en}
}
@phdthesis{Nolte2006,
author = {Nolte, Marc},
title = {Integration of freestanding polyelectrolyte multilayer membranes in larger scale structures},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7355},
school = {Universit{\"a}t Potsdam},
year = {2006},
abstract = {Ultrathin, semi-permeable membranes are not only essential in natural systems (membranes of cells or organelles) but they are also important for applications (separation, filtering) in miniaturized devices. Membranes, integrated as diffusion barriers or filters in micron scale devices need to fulfill equivalent requirements as the natural systems, in particular mechanical stability and functionality (e.g. permeability), while being only tens of nm in thickness to allow fast diffusion times. Promising candidates for such membranes are polyelectrolyte multilayers, which were found to be mechanically stable, and variable in functionality. In this thesis two concepts to integrate such membranes in larger scale structures were developed. The first is based on the directed adhesion of polyelectrolyte hollow microcapsules. As a result, arrays of capsules were created. These can be useful for combinatorial chemistry or sensing. This concept was expanded to couple encapsulated living cells to the surface. The second concept is the transfer of flat freestanding multilayer membranes to structured surfaces. We have developed a method that allows us to couple mm2 areas of defect free film with thicknesses down to 50 nm to structured surfaces and to avoid crumpling of the membrane. We could again use this technique to produce arrays of micron size. The freestanding membrane is a diffusion barrier for high molecular weight molecules, while small molecules can pass through the membrane and thus allows us to sense solution properties. We have shown also that osmotic pressures lead to membrane deflection. That could be described quantitatively.},
subject = {Polyelektrolyt},
language = {en}
}
@phdthesis{Franke2005,
author = {Franke, Danielle},
title = {Novel surfactants for the production of functional nanostructured materials via the ionic self-assembly (ISA) route = Neuartige Tenside f{\"u}r die Synthese funktioneller nanostrukturierter Materialien durch ionische Selbsorganisation},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6922},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {In recent years, the aim of supramolecular syntheses is not only the creation of particular structures but also the introduction of specific functions in these supramolecules. The present work describes the use of the ionic self-assembly (ISA) route to generate nanostructured materials with integrated functionality. Since the ISA strategy has proved to be a facile method for the production of liquid-crystalline materials, we investigated the phase behaviour, physical properties and function of a variety of ISA materials comprising a perylene derivative as the employed oligoelectrolyte. Functionality was introduced into the materials through the use of functional surfactants. In order to meet the requirements to produce functional ISA materials through the use of functional surfactants, we designed and synthesized pyrrole-derived monomers as surfactant building blocks. Owing to the presence of the pyrrole moiety, these surfactants are not only polymerizable but are also potentially conductive when polymerized. We adopted single-tailed and double-tailed N-substituted pyrrole monomers as target molecules. Since routine characterization analysis of the double-tailed pyrrole-containing surfactant indicated very interesting, complex phase behaviour, a comprehensive investigation of its interfacial properties and mesophase behavior was conducted. The synthesized pyrrole-derived surfactants were then employed in the synthesis of ISA complexes. The self-assembled materials were characterized and subsequently polymerized by both chemical and electrochemical methods. The changes in the structure and properties of the materials caused by the in-situ polymerization were addressed. In the second part of this work, the motif investigated was a property rather than a function. Since chiral superstructures have obtained much attention during the last few years, we investigated the possibility of chiral ISA materials through the use of chiral surfactants. Thus, the work involved synthesis of novel chiral surfactants and their incorporation in ISA materials with the aim of obtaining ionically self-assembled chiral superstructures. The results and insights presented here suggest that the presented synthesis strategy can be easily extended to incorporate any kind of charged tectonic unit with desired optical, electrical, or magnetic properties into supramolecular assemblies for practical applications.},
subject = {Nanotechnologie},
language = {en}
}
@phdthesis{Jovanovic2005,
author = {Jovanovic, Ljubisa},
title = {New synthetic approaches to 8,5'-neolignans},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6878},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {Neolignans, dehydrodimers of phenylpropenes, are natural products that exhibit different biological activities. 8,5'-Neolignans containing a trans- dihydrobenzofuran skeleton are the most abundant neolignans in nature. The published syntheses of trans-dihydrobenzofurans are multistep procedures that are time consuming and provide the product in low yield. Furthermore, all dimerisation reactions either in the presence of enzymes or mediated by metal salts are yielding dimers consisting of two units of the same phenylpropene compound, narrowing substantially the substitution pattern. Two different general synthetic approaches were examined. The first strategy was the enantioselective deprotonation at the α-carbon of the ο-alkyl phenols in the presence of a chiral diamine and sBuLi. Synthesis of several new phosphorous-based directed ortho-metalation groups was studied. The examined compounds having these new groups decomposed even under very mild reaction conditions and are not suitable for the application in the synthesis. The second strategy was to examine one [3+2] cycloaddition reaction, transition metal catalysed Heck oxyarylation reaction, in the synthetic approach to compounds having trans-dihydrobenzofuran skeleton. Palladium catalysed Heck oxyarylation reaction with halogenophenols or ortho-diazonium phenols as the starting material allowed the trans-dihydrobenzofuran compounds as the major products in acceptable yield and in one step. The products were formed under ligand free condition, as well as in the presence of some strong coordinating ligands (Ph3P). The experiments with several chiral ligands, showed that the obtained trans-dihydrobenzofurans were racemic mixtures. This result suggests formation of an achiral intermediate along the reaction pathway, which causes the lack of stereoselectivity in the products. Initially formed trans-dihydrobenzofuran compounds are the key precursors of many naturally occurring neolignans, and can be easily converted to 8,5'-neolignan derivatives.},
subject = {Dihydrobenzofurane},
language = {en}
}
@phdthesis{Andersen2005,
author = {Andersen, Audr{\´e}e},
title = {Surfactant dynamics at interfaces : a series of second harmonic generation experiments},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6553},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants.},
subject = {Tensid},
language = {en}
}
@phdthesis{Garnier2005,
author = {Garnier, S{\´e}bastien},
title = {Novel amphiphilic diblock copolymers by RAFT-polymerization, their self-organization and surfactant properties},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6395},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {The Reversible Addition Fragmentation Chain Transfer (RAFT) process using the new RAFT agent benzyldithiophenyl acetate is shown to be a powerful polymerization tool to synthesize novel well-defined amphiphilic diblock copolymers composed of the constant hydrophobic block poly(butyl acrylate) and of 6 different hydrophilic blocks with various polarities, namely a series of non-ionic, non-ionic comb-like, anionic and cationic hydrophilic blocks. The controlled character of the polymerizations was supported by the linear increase of the molar masses with conversion, monomodal molar mass distributions with low polydispersities and high degrees of end-group functionalization. The new macro-surfactants form micelles in water, whose size and geometry strongly depend on their composition, according to dynamic and static light scattering measurements. The micellization is shown to be thermodynamically favored, due to the high incompatibility of the blocks as indicated by thermal analysis of the block copolymers in bulk. The thermodynamic state in solution is found to be in the strong or super strong segregation limit. Nevertheless, due to the low glass transition temperature of the core-forming block, unimer exchange occurs between the micelles. Despite the dynamic character of the polymeric micellar systems, the aggregation behavior is strongly dependent on the history of the sample, i.e., on the preparation conditions. The aqueous micelles exhibit high stability upon temperature cycles, except for an irreversibly precipitating block copolymer containing a hydrophilic block exhibiting a lower critical solution temperature (LCST). Their exceptional stability upon dilution indicates very low critical micelle concentrations (CMC) (below 4∙10-4 g∙L-1). All non-ionic copolymers with sufficiently long solvophobic blocks aggregated into direct micelles in DMSO, too. Additionally, a new low-toxic highly hydrophilic sulfoxide block enables the formation of inverse micelles in organic solvents. The high potential of the new polymeric surfactants for many applications is demonstrated, in comparison to reference surfactants. The diblock copolymers are weakly surface-active, as indicated by the graduate decrease of the surface tension of their aqueous solutions with increasing concentration. No CMC could be detected. Their surface properties at the air/water interface confer anti-foaming properties. The macro-surfactants synthesized are surface-active at the interface between two liquid phases, too, since they are able to stabilize emulsions. The polymeric micelles are shown to exhibit a high ability to solubilize hydrophobic substances in water.},
subject = {Blockcopolymere},
language = {en}
}
@phdthesis{Justynska2005,
author = {Justynska, Justyna},
title = {Towards a library of functional block copolymers : synthesis and colloidal properties},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5907},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {Understanding the principles of self-organisation exhibited by block copolymers requires the combination of synthetic and physicochemical knowledge. The ability to synthesise block copolymers with desired architecture facilitates the ability to manipulate their aggregation behaviour, thus providing the key to nanotechnology. Apart from relative block volumes, the size and morphology of the produced nanostructures is controlled by the effective incompatibility between the different blocks. Since polymerisation techniques allowing for the synthesis of well-defined block copolymers are restricted to a limited number of monomers, the ability to tune the incompatibility is very limited. Nevertheless, Polymer Analogue Reactions can offer another possibility for the production of functional block copolymers by chemical modifications of well-defined polymer precursors. Therefore, by applying appropriate modification methods both volume fractions and incompatibility, can be adjusted. Moreover, copolymers with introduced functional units allow utilization of the concept of molecular recognition in the world of synthetic polymers. The present work describes a modular synthetic approach towards functional block copolymers. Radical addition of functional mercaptanes was employed for the introduction of diverse functional groups to polybutadiene-containing block copolymers. Various modifications of 1,2-polybutadiene-poly(ethylene oxide) block copolymer precursors are described in detail. Furthermore, extension of the concept to 1,2-polybutadiene-polystyrene block copolymers is demonstrated. Further investigations involved the self-organisation of the modified block copolymers. Formed aggregates in aqueous solutions of block copolymers with introduced carboxylic acid, amine and hydroxyl groups as well as fluorinated chains were characterised. Study of the aggregation behaviour allowed general conclusions to be drawn regarding the influence of the introduced groups on the self-organisation of the modified copolymers. Finally, possibilities for the formation of complexes, based on electrostatic or hydrogen-bonding interactions in mixtures of block copolymers bearing mutually interacting functional groups, were investigated.},
subject = {Blockcopolymere},
language = {en}
}
@phdthesis{Garnweitner2005,
author = {Garnweitner, Georg},
title = {Nichtw{\"a}ssrige Synthese und Bildungsmechanismus von {\"U}bergangsmetalloxid-Nanopartikeln = Nonaqueous synthesis of transition-metal oxide nanoparticles and their formation mechanism},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5892},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {In this work, the nonaqueous synthesis of binary and ternary metal oxide nanoparticles is investigated for a number of technologically important materials. A strong focus was put on studying the reaction mechanisms leading to particle formation upon solvothermal treatment of the precursors, as an understanding of the formation processes is expected to be crucial for a better control of the systems, offering the potential to tailor particle size and morphology. The synthesis of BaTiO3 was achieved by solvothermal reaction of metallic barium and titanium isopropoxide in organic solvents. Phase-pure, highly crystalline particles about 6 nm in size resulted in benzyl alcohol, whereas larger particles could be obtained in ketones such as acetone or acetophenone. In benzyl alcohol, a novel mechanism was found to lead to BaTiO3, involving a C-C coupling step between the isopropoxide ligand and the benzylic carbon of the solvent. The resulting coupling product, 4-phenyl-2-butanol, is found in almost stoichiometric yield. The particle formation in ketones proceeds via a Ti-mediated aldol condensation of the solvent, involving formal elimination of water which induces formation of the oxide. These processes also occurred when reacting solely the titanium alkoxide with ketones or aldehydes, leading to highly crystalline anatase nanoparticles for all tested solvents. In ketones, also the synthesis of nanopowders of lead zirconate titanate (PZT) was achieved, which were initially amorphous but could be crystallized by calcination at moderate temperatures. Additionally, PZT films were prepared by simply casting a suspension of the powder onto Si substrates followed by calcination.Solvothermal synthesis however is not restricted to alkoxides as precursors but is also achieved from metal acetylacetonates. The use of benzylamine as solvent proved particularly versatile, making possible the synthesis of nanocrystalline In2O3, Ga2O3, ZnO and iron oxide from the respective acetylacetonates. During the synthesis, the acetylacetonate ligand undergoes a solvolysis under C-C cleavage, resulting in metal-bound enolate ligands which, in analogy to the synthesis in ketones, induce ketimine and aldol condensation reactions. In the last section of this work, surface functionalization of anatase nanoparticles is explored. The particles were first capped with various organic ligands via a facile in situ route, which resulted in altered properties such as enhanced dispersibility in various solvents. In a second step, short functional oligopeptide segments were attached to the particles by means of a catechol linker to achieve advanced self-assembly properties.},
subject = {Nanopartikel},
language = {en}
}
@phdthesis{Nozari2005,
author = {Nozari, Samira},
title = {Towards understanding RAFT aqueous heterophase polymerization},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5801},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {Reversible addition-fragmentation transfer (RAFT) was used as a controlling technique for studying the aqueous heterophase polymerization. The polymerization rates obtained by calorimetric investigation of ab initio emulsion polymerization of styrene revealed the strong influence of the type and combination of the RAFT agent and initiator on the polymerization rate and its profile. The studies in all-glass reactors on the evolution of the characteristic data such as average molecular weight, molecular weight distribution, and average particle size during the polymerization revealed the importance of the peculiarities of the heterophase system such as compartmentalization, swelling, and phase transfer. These results illustrated the important role of the water solubility of the initiator in determining the main loci of polymerization and the crucial role of the hydrophobicity of the RAFT agent for efficient transportation to the polymer particles. For an optimum control during ab-initio batch heterophase polymerization of styrene with RAFT, the RAFT agent must have certain hydrophilicity and the initiator must be water soluble in order to minimize reactions in the monomer phase. An analytical method was developed for the quantitative measurements of the sorption of the RAFT agents to the polymer particles based on the absorption of the visible light by the RAFT agent. Polymer nanoparticles, temperature, and stirring were employed to simulate the conditions of a typical aqueous heterophase polymerization system. The results confirmed the role of the hydrophilicity of the RAFT agent on the effectiveness of the control due to its fast transportation to the polymer particles during the initial period of polymerization after particle nucleation. As the presence of the polymer particles were essential for the transportation of the RAFT agents into the polymer dispersion, it was concluded that in an ab initio emulsion polymerization the transport of the hydrophobic RAFT agent only takes place after the nucleation and formation of the polymer particles. While the polymerization proceeds and the particles grow the rate of the transportation of the RAFT agent increases with conversion until the free monomer phase disappears. The degradation of the RAFT agent by addition of KPS initiator revealed unambigueous evidence on the mechanism of entry in heterophase polymerization. These results showed that even extremely hydrophilic primary radicals, such as sulfate ion radical stemming from the KPS initiator, can enter the polymer particles without necessarily having propagated and reached a certain chain length. Moreover, these results recommend the employment of azo-initiators instead of persulfates for the application in seeded heterophase polymerization with RAFT agents. The significant slower rate of transportation of the RAFT agent to the polymer particles when its solvent (styrene) was replaced with a more hydrophilic monomer (methyl methacrylate) lead to the conclusion that a complicated cooperative and competitive interplay of solubility parameters and interaction parameter with the particles exist, determining an effective transportation of the organic molecules to the polymer particles through the aqueous phase. The choice of proper solutions of even the most hydrophobic organic molecules can provide the opportunity of their sorption into the polymer particles. Examples to support this idea were given by loading the extremely stiff fluorescent molecule, pentacene, and very hydrophobic dye, Sudan IV, into the polymer particles. Finally, the first application of RAFT at room temperature heterophase polymerization is reported. The results show that the RAFT process is effective at ambient temperature; however, the rate of fragmentation is significantly slower. The elevation of the reaction temperature in the presence of the RAFT agent resulted in faster polymerization and higher molar mass, suggesting that the fragmentation rate coefficient and its dependence on the temperature is responsible for the observed retardation.},
subject = {Heterophasenpolymerisation},
language = {en}
}
@phdthesis{Maltseva2005,
author = {Maltseva, Elena},
title = {Model membrane interactions with ions and peptides at the air/water interface},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5670},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {The interactions between peptides and lipids are of fundamental importance in the functioning of numerous membrane-mediated biochemical processes including antimicrobial peptide action, hormone-receptor interactions, drug bioavailability across the blood-brain barrier and viral fusion processes. Alteration of peptide structure could be a cause of many diseases. Biological membranes are complex systems, therefore simplified models may be introduced in order to understand processes occurring in nature. The lipid monolayers at the air/water interface are suitable model systems to mimic biological membranes since many parameters can be easily controlled. In the present work the lipid monolayers were used as a model membrane and their interactions with two different peptides B18 and Amyloid beta (1-40) peptide were investigated. B18 is a synthetic peptide that binds to lipid membranes that leads to the membrane fusion. It was demonstrated that it adopts different structures in the aqueous solutions and in the membrane interior. It is unstructured in solutions and forms alpha-helix at the air/water interface or in the membrane bound state. The peptide has affinity to the negatively charged lipids and even can fold into beta-sheet structure in the vicinity of charged membranes at high peptide to lipid ratio. It was elucidated that in the absence of electrostatic interactions B18 does not influence on the lipid structure, whereas it provides partial liquidization of the negatively charged lipids. The understanding of mechanism of the peptide action in model system may help to develop the new type of antimicrobial peptides as well as it can shed light on the general mechanisms of peptide/membrane binding. The other studied peptide - Amyloid beta (1-40) peptide, which is the major component of amyloid plaques found in the brain of patients with Alzheimer's disease. Normally the peptide is soluble and is not toxic. During aging or as a result of the disease it aggregates and shows a pronounced neurotoxicity. The peptide aggregation involves the conformational transition from a random coil or alpha-helix to beta-sheets. Recently it was demonstrated that the membrane can play a crucial role for the peptide aggregation and even more the peptide can cause the change in the cell membranes that leads to a neuron death. In the present studies the structure of the membrane bound Amyloid beta peptide was elucidated. It was found that the peptide adopts the beta-sheet structure at the air/water interface or being adsorbed on lipid monolayers, while it can form alpha-helical structure in the presence of the negatively charged vesicles. The difference between the monolayer system and the bulk system with vesicles is the peptide to lipid ratio. The peptide adopts the helical structure at low peptide to lipid ratio and folds into beta-sheet at high ratio. Apparently, Abeta peptide accumulation in the brain is concentration driven. Increasing concentration leads to a change in the lipid to peptide ratio that induces the beta-sheet formation. The negatively charged lipids can act as seeds in the plaque formation, the peptide accumulates on the membrane and when the peptide to lipid ratio increases it the peptide forms toxic beta-sheet containing aggregates.},
subject = {Lipide},
language = {en}
}
@phdthesis{Voss2005,
author = {Voß, Rebecca},
title = {Mesoporous organosilica materials with amine functions : surface characteristics and chirality},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5287},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {In this work mesoporous organisilica materials are synthesized through the silica sol-gel process. For this a new class of precursors which are also surfactant are synthesized and self-assembled. This leads to a high surface area functionality which is analysized with copper (II) and water adsorption.},
subject = {Silicate},
language = {en}
}
@phdthesis{Mertoglu2004,
author = {Mertoglu, Murat},
title = {The synthesis of well-defined functional homo- and block copolymers in aqueous media via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-2338},
school = {Universit{\"a}t Potsdam},
year = {2004},
abstract = {New chain transfer agents based on dithiobenzoate and trithiocarbonate for free radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT) were synthesized. The new compounds bear permanently hydrophilic sulfonate moieties which provide solubility in water independent of the pH. One of them bears a fluorophore, enabling unsymmetrical double end group labelling as well as the preparation of fluorescent labeled polymers. Their stability against hydrolysis in water was studied, and compared with the most frequently employed water-soluble RAFT agent 4-cyano-4-thiobenzoylsulfanylpentanoic acid dithiobenzoate, using UV-Vis and 1H-NMR spectroscopy. An improved resistance to hydrolysis was found for the new RAFT agents, providing good stabilities in the pH range between 1 and 8, and up to temperatures of 70°C. Subsequently, a series of non-ionic, anionic and cationic water-soluble monomers were polymerized via RAFT in water. In these experiments, polymerizations were conducted either at 48°C or 55°C, that are lower than the conventionally employed temperatures (>60°C) for RAFT in organic solvents, in order to minimize hydrolysis of the active chain ends (e.g. dithioester and trithiocarbonate), and thus to obtain good control over the polymerization. Under these conditions, controlled polymerization in aqueous solution was possible with styrenic, acrylic and methacrylic monomers: molar masses increase with conversion, polydispersities are low, and the degree of end group functionalization is high. But polymerizations of methacrylamides were slow at temperatures below 60°C, and showed only moderate control. The RAFT process in water was also proved to be a powerful method to synthesize di- and triblock copolymers including the preparation of functional polymers with complex structure, such as amphiphilic and stimuli-sensitive block copolymers. These include polymers containing one or even two stimuli-sensitive hydrophilic blocks. The hydrophilic character of a single or of several blocks was switched by changing the pH, the temperature or the salt content, to demonstrate the variability of the molecular designs suited for stimuli-sensitive polymeric amphiphiles, and to exemplify the concept of multiple-sensitive systems. Furthermore, stable colloidal block ionomer complexes were prepared by mixing anionic surfactants in aqueous media with a double hydrophilic block copolymer synthesized via RAFT in water. The block copolymer is composed of a noncharged hydrophilic block based on polyethyleneglycol and a cationic block. The complexes prepared with perfluoro decanoate were found so stable that they even withstand dialysis; notably they do not denaturate proteins. So, they are potentially useful for biomedical applications in vivo.},
language = {en}
}
@phdthesis{Rusu2004,
author = {Rusu, Viorel Marin},
title = {Composite materials made of chitosan and nanosized apatite : preparation and physicochemical characterization},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-2316},
school = {Universit{\"a}t Potsdam},
year = {2004},
abstract = {Taking inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite were investigated. A new preparation approach based on a co-precipitation method has been developed. In its earlier stage of formation, the composite occurs as hydrogel as suspended in aqueous alkaline solution. In order to get solid composites various drying procedures including freeze-drying technique, air-drying at room temperature and at moderate temperatures, between 50oC and 100oC were used. Physicochemical studies showed that the composites exhibit different properties with respect to their structure and composition. IR and Raman spectroscopy probed the presence of both chitosan and hydroxyapatite in the composites. Hydroxyapatite as dispersed in the chitosan matrix was found to be in the nanosize range (15-50 nm) and occurs in a bimodal distribution with respect to its crystallite length. Two types of distribution domains of hydroxyapatite crystallites in the composite matrix such as cluster-like (200-400 nm) and scattered-like domains were identified by the transmission electron microscopy (TEM), X-ray diffraction (XRD) and by confocal scanning laser microscopy (CSLM) measurements. Relaxation NMR experiments on composite hydrogels showed the presence of two types of water sites in their gel networks, such as free and bound water. Mechanical tests showed that the mechanical properties of composites are one order of magnitude less than those of compact bone but comparable to those of porous bone. The enzymatic degradation rates of composites showed slow degradation processes. The yields of degradation were estimated to be less than 10\% by loss of mass, after incubation with lysozyme, for a period of 50 days. Since the composite materials were found biocompatible by the in vivo tests, the simple mode of their fabrication and their properties recommend them as potential candidates for the non-load bearing bone substitute materials.},
language = {en}
}
@phdthesis{Schlaad2005,
author = {Schlaad, Helmut},
title = {Polymer self-assembly : adding complexity to mesostructures of diblock copolymers by specific interactions},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001824},
school = {Universit{\"a}t Potsdam},
year = {2005},
abstract = {In dieser Arbeit wurde die Rolle selektiver, nicht-kovalenter Wechselwirkungen bei der Selbstorganisation von Diblockcopolymeren untersucht. Durch Einf{\"u}hrung elektrostatischer, dipolarer Wechselwirkungen oder Wasserstoffbr{\"u}ckenbindungen sollte es gelingen, komplexe Mesostrukturen zu erzeugen und die Ordnung vom Nanometerbereich auf gr{\"o}ßere L{\"a}ngenskalen auszuweiten. Diese Arbeit ist im Rahmen von Biomimetik zu sehen, da sie Konzepte der synthetischen Polymer- und Kolloidchemie und Grundprinzipien der Strukturbildung in supramolekularen und biologischen Systemen verbindet. Folgende Copolymersysteme wurden untersucht: (i) Blockionomere, (ii) Blockcopolymere mit chelatisierenden Acetoacetoxyeinheiten und (iii) Polypeptid-Blockcopolymere.},
language = {en}
}
@phdthesis{Sinn2004,
author = {Sinn, Cornelia G.},
title = {Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in w{\"a}ssrigen L{\"o}sungen},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001778},
school = {Universit{\"a}t Potsdam},
year = {2004},
abstract = {Ziel dieser Arbeit ist die Untersuchung der Ionenbindung an Polymeren und Lipidmembranen in w{\"a}ssrigen L{\"o}sungen. Im ersten Teil dieser Arbeit wurde der Einfluss verschiedener anorganischer Salze und Polyelektrolyte auf die Struktur des Wassers mit Hilfe Isothermer Mikrotitrationskalorimetrie (ITC) erforscht. Die Verd{\"u}nnungsw{\"a}rme der Salze wurde als Maß f{\"u}r die F{\"a}higkeit der Ionen, die geordnete Struktur des Wassers zu stabilisieren oder zu zerst{\"o}ren, verwendet. Die Verd{\"u}nnungsw{\"a}rmen konnten auf Hofmeister Effekte zur{\"u}ckgef{\"u}hrt werden. Im Anschluss daran wurde die Bindung von Ca2+ an Natrium- Poly(acryls{\"a}ure) (NaPAA) untersucht. Mit Hilfe von ITC und einer Ca2+- selektiven Elektrode wurde die Reaktionsenthalpie und Bindungsisotherme gemessen. Es wurde gezeigt, dass die Binding von Ca2+ - Ionen an NaPAA stark endotherm und daher entropiegetrieben ist. Anschließend wurde die Bindung von Ca2+ an die eindimensionale Polymerkette mit der an ein Lipidvesikel mit denselben funktioniellen Gruppen verglichen. Es wurde beobachtet, dass die Ionenbindung \–wie auch im Fall des Polymers- endotherm ist. Ein Vergleich der Ca2+- Bindung an die Lipidmembran mit der an das Polymer konnte zeigen, dass das Ion schw{\"a}cher an die Membran bindet. Im Zusammenhang mit diesen Experimenten wurde auch beobachtet, dass Ca2+ nicht nur an geladene, sondern auch an zwitterionische Lipidvesikel bindet. Schließlich wurde die Wechselwirkung zweier Salze, KCl and NaCl, mit einem neutralen Polymergel, PNIPAAM, und dem geladenen Polymer PAA untersucht. Mit Hilfe von Kalorimetrie und einer kaliumselektiven Elektrode wurde beobachtet, dass die Ionen mit beiden Polymeren wechselwirken, unabh{\"a}ngig davon, ob diese Ladungen tragen, oder nicht.},
language = {en}
}
@phdthesis{Appajaiah2004,
author = {Appajaiah, Anilkumar},
title = {Climatic stability of polymer optical fibers (POF)},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001661},
school = {Universit{\"a}t Potsdam},
year = {2004},
abstract = {Optische Polymerfasern stellen ein relativ neues Medium zur Hochgeschwindigkeitsdaten{\"u}bertragung mittels moduliertem Licht dar. Sie gestatten die Verbreitung großer Datenmengen {\"u}ber Entfernungen bis zu ca. 100 m, ohne eine Beeinflussung durch externe elektromagnetischen Feldern. Jedoch reagieren die Fasern und somit auch ihre optischen Eigenschaften aufgrund des organischchemischen Faseraufbaus empfindlich auf das Klima ihrer Umgebung. Die Ursachen f{\"u}r die Abnahme der optischen Transmission aufgrund von klimatischen Einfl{\"u}ssen (Alterung, Degradation) werden mittels chemisch analytischer Verfahren wie Chemilumineszenz (CL) und Fourier Transform Infrarot (FTIR) Spektroskopie untersucht. Dabei kommen f{\"u}nf, von verschiedenen Herstellern bezogene, Multimode- POFs aus PMMA in sieben verschiedenen Klimaten zum Einsatz. Drei dieser f{\"u}nf POFs werden genauer untersucht, um den Einfluss einzelner Parameter festzustellen und optische Langzeitstabilit{\"a}t aufgrund von Kurzzeittests vorherzusagen. Als erstes erfolgt eine Kennzeichnung unbeanspruchter POF Komponenten (Kern, Mantel und nackte POF als Kombination von Kern und Mantel) {\"u}ber ihre physikalischen und chemischen Eigenschaften. Die Glas- und die Schmelztemperaturen liegen im Bereich von 120 °C bis 140 °C, das Molekulargewicht des Kerns bei gr{\"o}ßenordnungsm{\"a}ßig 105 g mol-1 ;. FTIR-Messungen zeigen zwar Unterschiede in der chemischen Zusammensetzung der M{\"a}ntel aber keine Unterschiede bei den Kernen. Bei zwei der POF Proben , die als Kabel (Kern, Mantel und Schutzh{\"u}lle) f{\"u}r 3300 Stunden einem Klima aus 92 °C und 95 \% relativer Feuchte (r.F.) ausgesetzt waren, verringern sich daraufhin die optische Transmissionen in unterschiedlicher Weise. Die Untersuchung der zugeh{\"o}rigen nackten POFs mittels CL, FTIR, Thermogravimetrie (TG), UV/VIS und Gel Permeation Chromatographie (GPC) l{\"a}sst eine st{\"a}rkere Sch{\"a}digung der M{\"a}ntel als der Kerne vermuten. Wahrscheinlich f{\"u}hrt eine starke Manteldegradation zu einer erh{\"o}hten Absorption und Fehlstellen im Mantel und damit zu einer Transmissionsabnahme. Daher scheint die optische Stabilit{\"a}t der POF st{\"a}rker durch die thermo-oxidative Stabilit{\"a}t des Mantels bestimmt zu sein als durch die des Kernes. Drei nackte POFs (Kern und Mantel) sind unterschiedlich lang (30 Stunden bis 3000 Stunden) folgenden Klimaten ausgesetzt: 92 °C / 95 \% r.F., 92 °C / 50 \% r.F., 50 °C / 95 \% r.F., 90 °C / geringe Feuchte, 100 °C / geringe Feuchte, 110 °C / geringe Feuchte and 120 °C / geringe Feuchte. Auch in diesen Klimaten ergaben sich probenbedingte unterschiedliche Transmissions{\"a}nderungen. Die Ergebnisse deuten stark darauf hin, dass bei gleichzeitig hoher Temperatur und hoher Feuchte physikalische {\"A}nderungen wie die Volumenausdehnung die Hauptursachen f{\"u}r die Abnahme der optischen Transmission bilden. Ein weiterer Einflussfaktor ist die chemische Zusammensetzung der M{\"a}ntel. Bei Kombination von hoher Temperatur und geringer Feuchte erzeugen in den Anfangsstadien der Alterung physikalische {\"A}nderungen Transmissionsabnahmen, vermutlich entstehen Fehlstellen in der Kern-Mantel-Grenzschicht. Hinzukommen in den sp{\"a}teren Stadien wahrscheinlich zunehmende Lichtabsorption in Kern und Mantel. L. Jankowski (Doktorand in der BAM) best{\"a}tigt diese Annahme durch parallel ausgef{\"u}hrte optische Simulationsrechnungen. Auch f{\"u}r nackte POFs scheint also die thermo-oxidative Stabilit{\"a}t die optische Stabilit{\"a}t zu bestimmen. Kurzzeitalterungstests sollen Aufschluss {\"u}ber den Einfluss individueller Klimaparameter auf die POF Eigenschaften geben. Es zeigt sich bei dauerhaft hoher Temperatur und variabler Feuchte aufgrund des physikalisch absorbierten Wassers bis zu einem gewissen Grad ein reversibles Verhalten des Transmissionsverlustes. Dieses Verhalten tritt aber nur kaum merkbar auf, wenn bei konstanter hoher Feuchte die Temperatur variiert wird. Bei Raumtemperatur und variabler Feuchte stellt sich jedoch ein voll reversibles Verhalten des Transmissionsverlustes ein. Die hier beschriebenen Untersuchungen sind als Ausgangspunkt f{\"u}r weitergehende Forschungen zu verstehen. Die begrenzte Zurverf{\"u}gungstellung von POF Basisdaten durch die Hersteller und der zeitaufwendige klimabedingte Alterungsprozess beschr{\"a}nken die Ergebnisse mehr oder weniger auf die untersuchten Proben. Signifikante allgemeine Aussagen erfordern aber beispielsweise zus{\"a}tzliche statistische Daten der Produktionsschwankungen von POF Eigenschaften. Dennoch besitzen die hier beschriebenen Tests das Potential f{\"u}r eine Ann{\"a}herung an die optische Langzeitstabilit{\"a}t und deren Vorhersage.},
language = {en}
}
@phdthesis{RamirezRios2004,
author = {Ram{\´i}rez R{\´i}os, Liliana Patricia},
title = {Superpara- and paramagnetic polymer colloids by miniemulsion processes},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001267},
school = {Universit{\"a}t Potsdam},
year = {2004},
abstract = {Polymerverkapselte magnetische Nanopartikel versprechen, in der Zukunft sehr erfolgreich bei Anwendungen in der Biologie und der Medizin eingesetzt werden zu k{\"o}nnen z. B. in der Krebstherapie und als Kontrastmittel bei der magnetischen Kernspinresonanztomographie. Diese Arbeit zeigt, dass durch die interdisziplin{\"a}re Kombination verschiedener Techniken Herstellungsverfahren und Eigenschaften solcher Partikel verbessert werden k{\"o}nnen. Unter Miniemulsionen versteht man w{\"a}ssrige Dispersionen relativ stabiler {\"O}ltr{\"o}pfchen, zwischen 30 und 50 nm Gr{\"o}ße. Ein Nanometer (nm) ist der 1.000.000.000ste Teil eines Meters. Ein Haar ist ungef{\"a}hr 60.000 Nanometer breit. Hergestellt werden Miniemulsionen durch Scherung eines Systems bestehend aus {\"O}l, Wasser, Tensid (Seife) und einer weiteren Komponente, dem Hydrophob, das die Tr{\"o}pfchen stabilisieren soll. Die Polymerisation von Miniemulsionen erm{\"o}glicht die Verkapselung anorganischer Materialen z. B. magnetischer Teilchen oder Gadolinium-haltiger Komponenten. Zu Optimierung des Verkapselung, ist es notwendig, die richtige Menge eines geeigneten Tensids zu finden. Die magnetischen polymerverkapselten Nanopartikel, die in einer w{\"a}ssrigen Tr{\"a}gerfl{\"u}ssigkeit dispergiert sind, zeigen in Abh{\"a}ngigkeit von Partikelgr{\"o}ße, Zusammensetzung, elektronischer Beschaffenheit, etc. ein sogenanntes superpara- oder paramagnetisches Verhalten. Superpara- oder paramagnetisches Verhalten bedeutet, dass die Fl{\"u}ssigkeiten in Anwesenheit {\"a}ußerer Magnetfeldern ihre Fließf{\"a}higkeit beibehalten. Wenn das Magnetfeld entfernt wird, haben sie keine Erinnerung mehr daran, unter dem Einfluss eines Magnetfeldes gestanden zu haben, d. h., dass sie nach Abschalten des Magnetfeldes selbst nicht mehr magnetisch sind. Die Vorteile des Miniemulsionsverfahrens sind der hohe Gehalt und die homogene Verteilung magnetischer Teilchen in den einzelnen Nanopartikeln. Außerdem erm{\"o}glicht dieses Verfahren nanostrukturierte Kompositpartikel herzustellen, wie z. B polymerverkapselte Nanopartikel mit Nanoschichten bestehend aus magnetischen Molek{\"u}len.},
language = {en}
}
@phdthesis{TzonevaVelinova2003,
author = {Tzoneva-Velinova, Rumiana},
title = {The wettability of biomaterials determines the protein adsorption and the cellular responses},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001103},
school = {Universit{\"a}t Potsdam},
year = {2003},
abstract = {During the past several decades polymer materials become widely used as components of medical devices and implants such as hemodialysers, bioartificial organs as well as vascular and recombinant surgery. Most of the devices cannot avoid the blood contact in their use. When the polymer materials come in contact with blood they can cause different undesired host responses like thrombosis, inflammatory reactions and infections. Thus the materials must be hemocompatible in order to minimize these undesired body responses. The earliest and one of the main problems in the use of blood-contacting biomaterials is the surface induced thrombosis. The sequence of the thrombus formation on the artificial surfaces has been well established. The first event, which occurs, after exposure of biomaterials to blood, is the adsorption of blood proteins. Surface physicochemical properties of the materials as wettability greatly influence the amount and conformational changes of adsorbed proteins. In turn the type, amount and conformational state of the adsorbed protein layer determines whether platelets will adhere and become activated or not on the artificial surface and thus to complete the thrombus formation. The adsorption of fibrinogen (FNG), which is present in plasma, has been shown to be closely related to surface induced thrombosis by participating in all processes of the thrombus formation such as fibrin formation, platelet adhesion and aggregation. Therefore study the FNG adsorption to artificial surfaces could contribute to better understanding of the mechanisms of platelet adhesion and activation and thus to controlling the surface induced thrombosis. Endothelization of the polymer surfaces is one of the strategies for improving the materials hemocompatibility, which is believed to be the most ideal solution for making truly blood-compatible materials. Since at physiological conditions proteins such as FNG and fibronectin (FN) are the usual extracellular matrix (ECM) for endothelial cells (EC) adhesion, precoating of the materials with these proteins has been shown to improve EC adhesion and growth in vitro. ECM proteins play an essential role not only like a structural support for cell adhesion and spreading, but also they are important factor in transmitting signals for different cell functions. The ability of cells to remodel plasma proteins such as FNG and FN in matrix-like structures together with the classical cell parameters such as actin cytoskeleton and focal adhesion formation could be used as an criteria for proper cell functioning. The establishment and the maintaining of delicate balance between cell-cell and cell-substrate contacts is another important factor for better EC colonization of the implants. The functionality of newly established endothelium in order to produce antithromotic substances should be always considered when EC seeding is used for improving the hemocompatibility of the polymer materials. Controlling the polymer surface properties such as surface wettability represents a versatile approach to manipulate the above cellular responses and therefore can be used in biomaterial and tissue engineering applications for producing better hemocompatible materials.},
language = {en}
}
@phdthesis{Deshpande2004,
author = {Deshpande, Atul Suresh},
title = {Fabrication of porous metal oxides for catalytic application using templating techniques},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001324},
school = {Universit{\"a}t Potsdam},
year = {2004},
abstract = {Nanostrukturierte Materialien zeichnen sich dadurch aus, dass sie aus sehr kleinen Baueinheiten zusammengesetzt sind. Typischerweise liegt die Gr{\"o}ssenordnung dieser Bausteine im Bereich von einigen Nanometern. Ein Nanometer entspricht 10-9 Meter. Dadurch bekommen nanostrukturierte Materialien oft verbesserte, vielfach sogar ganz neue Eigenschaften, die f{\"u}r viele heutige wie auch zuk{\"u}nftige Anwendungen von Vorteil sind. Ein Weg, um solche nanostrukturierte Materialien herzustellen, ist die sogenannte \„Templatierungsmethode\“. Das Templat besteht aus einem einzelnen Molek{\"u}l, einer Ansammlung von Molek{\"u}len oder aus einem festen Objekt. Beim Aufbau des nanostrukturierten Materials wirkt das Templat als Schablone oder als Gussform und beeinflusst damit die Struktur des Endproduktes. Normalerweise besteht dieser Prozess aus mehreren Schritten. Zuerst wird der Raum um das Templat mit dem Ausgangsstoff umh{\"u}llt oder ausgef{\"u}llt, dann wird der Ausgangsstoff chemisch in das gew{\"u}nschte Endprodukt umgewandelt, wobei das Templat die Endform kontrolliert und am Schluss wird das Templat entfernt. Das geschieht meistens durch Erhitzen. Als Ausgangsstoff k{\"o}nnen dabei einzelne Molek{\"u}le verwendet werden, die sich leicht in das Endprodukt umwandeln lassen, oder aber vorgeformte Partikelchen, die nur noch zur entsprechenden Form angeordnet werden m{\"u}ssen. In dieser Arbeit wurden por{\"o}se Metalloxid-K{\"u}gelchen hergestellt, die aus einem Gemisch aus Titanoxid und entweder Aluminium-, Gallium- oder Indiumoxid bestehen. Als Template wurden por{\"o}se Kunststoffk{\"u}gelchen eingesetzt, die man sonst f{\"u}r Chromatographiezwecke braucht. Bei der Synthese wurden die Poren der Kunststoffk{\"u}gelchen mit dem Ausgangsmaterial gef{\"u}llt und mit Wasser in ein amorphes Netzwerk umgewandelt. Danach werden die K{\"u}gelchen erhitzt, wobei das Kunststofftemplat zersetzt wird. Gleichzeitig wird das amorphe Ger{\"u}st in stabile, kristalline W{\"a}nde umgewandelt, die die Form der K{\"u}gelchen auch dann noch behalten, wenn das Templat verschwunden ist. Mit einem {\"a}hnlichen Prozess wurden auch K{\"u}gelchen aus Cer-Zirkonoxid erhalten. Als Ausgangsstoff wurden dabei aber vorgeformte Cer-Zirkonoxid-Nanopartikel eingesetzt, die in die Poren der Kunststofftemplatk{\"u}gelchen hinein diffundieren. Diese Cer-Zirkonoxid-Nanopartikel lassen sich auch f{\"u}r die Herstellung von por{\"o}sen Pulvern verwenden, wobei dann nicht Polymerk{\"u}gelchen, sondern hochgeordnete Ansammlungen von Block Copolymeren als Template verwendet werden. Form, Struktur und Eigenschaften all dieser Materialien wurden systematisch unter Anwendung verschiedenster Analysemethoden untersucht. Die auf Titanoxid-basierten K{\"u}gelchen wurden auch auf ihre photokatalytische Verwendung zum Abbau von umweltsch{\"a}dlichem 2-Chlorophenol untersucht. Die Cer-Zirkonoxid-K{\"u}gelchen wurden f{\"u}r die Herstellung von Wasserstoff aus Methanol getestet. Wasserstoff gilt als hoffungsvoller, sauberer Energietr{\"a}ger der Zukunft und kommt in Brennstoffzellen zum Einsatz.},
language = {en}
}
@phdthesis{Krasia2003,
author = {Krasia, Theodora},
title = {Synthese und kolloidale Eigenschaften neuartiger Blockcopolymere mit beta-Dicarbonyl Einheiten = Synthesis and colloidal properties of a novel type of block copolymers bearing beta-dicarbonyl residues},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000787},
school = {Universit{\"a}t Potsdam},
year = {2003},
abstract = {The present work is dealing with the first synthesis and characterisation of amphiphilic diblock copolymers bearing b-dicarbonyl (acetoacetoxy) chelating residues. Polymers were obtained by Group Transfer Polymerisation (GTP)/acetoacetylation and controlled radical polymerisation techniques (RAFT).Different micellar morphologies of poly(n-butyl methacrylate)-block-poly[2-(acetoacetoxy)ethyl methacrylate] (pBuMA-b-pAEMA) were observed in cyclohexane as a selective solvent. Depending on the block length ratio, either spherical, elliptical, or cylindrical micelles were formed. The density of the polymer chains at the core/corona interface is considerably higher as compared to any other strongly segregating system reported in the literature. It is demonstrated that there are H-bond interactions existing between acetoacetoxy groups, which increase the incompatibility between block segments. In addition, such interactions lead to the formation of secondary structures (such as b-sheets or globular structures) and larger superstructures in the micrometer length scale.Block copolymers were also used to solubilise metal ion salts of different geometries and oxidation states in organic media, in which are otherwise insoluble. Sterically stabilised colloidal hybrid materials are formed, i.e. monodisperse micelles having the metal ion salt incorporated in their core upon complexation with the ligating pAEMA block, whereas pBuMA forms the solvating corona responsible for stabilisation in solution. Systematic studies show that the aggregation behaviour is dependent on different factors, such as the tautomeric form of the beta-dicarbonyl ligand (keto/enol) as well as the nature and amount of added metal ion salt.},
language = {en}
}
@phdthesis{Montenegro2003,
author = {Montenegro, Rivelino V. D.},
title = {Crystallization, biomimetics and semiconducting polymers in confined systems},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000726},
school = {Universit{\"a}t Potsdam},
year = {2003},
abstract = {popul{\"a}rwissenschaftlicher Abstract: Kristallisation, Biomimetik und halbleitende Polymere in r{\"a}umlich begrenzten Systemen: {\"O}l und Wasser mischen sich nicht, man kann aber aus beiden Fl{\"u}ssigkeiten Emulsionen herstellen, bei denen Tr{\"o}pfchen der einen Fl{\"u}ssigkeit in der anderen Fl{\"u}ssigkeit vorliegen. Das heißt, es k{\"o}nnen entweder {\"O}ltr{\"o}pfchen in Wasser oder Wassertr{\"o}pfchen in {\"O}l erzeugt werden. Aus t{\"a}glichen Erfahrungen, z.B. beim Kochen weiß man jedoch, dass sich eine Emulsion durch Sch{\"u}tteln oder R{\"u}hren herstellen l{\"a}sst, diese jedoch nicht besonders stabil ist. Mit Hilfe von hohen Scherenergien kann man nun sehr kleine, in ihrer Gr{\"o}ße sehr einheitliche und außerdem sehr stabile Tr{\"o}pfchen von 1/10000 mm erhalten. Eine solche Emulsion wird Miniemulsion genannt. In der Dissertation wurden nun z.B. Miniemulsionen untersucht, die aus kleinen Wassertr{\"o}pfchen in einem {\"O}l bestehen. Es konnte gezeigt werden, dass das Wasser in diesen Tr{\"o}pfchen, also in den r{\"a}umlich begrenzten Systemen, nicht bei 0 \&\#176;C, sondern bei -22 \&\#176;C kristallisierte. Wie l{\"a}sst sich das erkl{\"a}ren? Wenn man einen Eimer Wasser hat, dann bildet sich normalerweise bei 0 \&\#176;C Eis, da n{\"a}mlich in dem Wasser einige (manchmal ganz wenige) Keime (z.B. Schutzteilchen, ein Fussel etc.) vorhanden sind, an denen sich die ersten Kristalle bilden. Wenn sich dann einmal ein Kristall gebildet hat, kann das Wasser im gesamten Eimer schnell zu Eis werden. Ultrareines Wasser w{\"u}rde bei -22 \&\#176;C kristallisieren. Wenn man jetzt die Menge Wasser aus dem Eimer in kleine Tr{\"o}pfchen bringt, dann hat man eine sehr, sehr große Zahl, n{\"a}mlich 1017 Tr{\"o}pfchen, in einem Liter Emulsion vorliegen. Die wenigen Schmutzpartikel verteilen auf sehr wenige Tr{\"o}pfchen, die anderen Tr{\"o}pfchen sind ultrarein. Daher kristallisieren sie erst bei -22 \&\#176;C. Im Rahmen der Arbeit konnte auch gezeigt werden, dass die Miniemulsionen genutzt werden k{\"o}nnen, um kleine Gelatine-Partikel, also Nanogummib{\"a}rchen, herzustellen. Diese Nanogummib{\"a}rchen quellen bei Erh{\"o}hung der Temperatur auf ca. 38 \&\#176;C an. Das kann ausgenutzt werden, um zum Beispiel Medikamente zun{\"a}chst in den Partikeln im menschlichen K{\"o}rper zu transportieren, die Medikamente werden dann an einer gew{\"u}nschten Stelle freigelassen. In der Arbeit wurde auch gezeigt, dass die Gelatine-Partikel genutzt werden k{\"o}nnen, um die Natur nachzuahnen (Biomimetik). Innerhalb der Partikel kann n{\"a}mlich gezielt Knochenmaterial aufgebaut werden kann. Die Gelatine-Knochen-Partikel k{\"o}nnen dazu genutzt werden, um schwer heilende oder komplizierte Knochenbr{\"u}che zu beheben. Gelatine wird n{\"a}mlich nach einigen Tagen abgebaut, das Knochenmaterial kann in den Knochen eingebaut werden. LEDs werden heute bereits vielf{\"a}ltig verwendet. LEDs bestehen aus Halbleitern, wie z.B. Silizium. Neuerdings werden dazu auch halbleitende Polymere eingesetzt. Das große Problem bei diesen Materialien ist, dass sie aus L{\"o}sungsmitteln aufgebracht werden. Im Rahmen der Doktorarbeit wurde gezeigt, dass der Prozess der Miniemulsionen genutzt werden kann, um umweltfreundlich diese LEDs herzustellen. Man stellt dazu nun w{\"a}ssrige Dispersionen mit den Polymerpartikeln her. Damit hat man nicht nur das L{\"o}sungsmittel vermieden, das hat nun noch einen weiteren Vorteil: man kann n{\"a}mlich diese Dispersion auf sehr einfache Art verdrucken, im einfachsten Fall verwendet man einfach einen handels{\"u}blichen Tintenstrahldrucker.},
language = {en}
}
@phdthesis{Johann2001,
author = {Johann, Robert},
title = {Thermodynamic, morphological and structural properties of dissociated fatty acid monolayers at the air-water interface},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000050},
school = {Universit{\"a}t Potsdam},
year = {2001},
abstract = {Untersuchungen an Monoschichten amphiphiler Lipide auf w{\"a}ssriger L{\"o}sung sind in der Grenzfl{\"a}chenforschung von grundlegender Bedeutung. Aufgrund der Anwendbarkeit zahlreicher analytischer Methoden sind schwimmende unl{\"o}sliche Monoschichten als Modellsysteme sehr geeignet, um Ordnung und Strukturbildung sowie den Transport von Materie in zwei Dimensionen oder die Wechselwirkung von Molek{\"u}len an der Grenzfl{\"a}che mit Teilchen in L{\"o}sung (Stichwort \“molekulare Erkennung\”) zu studieren. Aus dem Verhalten von Monoschichten lassen sich z. B. R{\"u}ckschl{\"u}sse ziehen auf die Eigenschaften von Lipidschichten auf festen Substraten oder in biologischen Membranen. Diese Arbeit befasst sich mit spezifischen und fundamentalen Wechselwirkungen in Monoschichten sowohl auf molekularer als auch auf mikroskopischer Ebene und deren Beziehung zu Gitterstruktur, Aussehen und thermodynamischem Verhalten von Monoschichten an der Wasser/Luft Grenzfl{\"a}che. Als Modellsystem werden haupts{\"a}chlich Monoschichten langkettiger Fetts{\"a}uren verwendet, da in ihnen die molekularen Wechselwirkungen durch {\"A}nderung des Subphasen-pH-Werts {\"u}ber den Dissoziationsgrad gezielt und schrittweise ver{\"a}ndert werden k{\"o}nnen. Ausser {\"u}ber die Subphasenzusammensetzung werden die molekularen Wechselwirkungen auch {\"u}ber die Temperatur und die Monoschichtzusammensetzung systematisch variiert. Mit Hilfe von Isothermen- und Oberfl{\"a}chenpotentialmessungen, Brewsterwinkel-Mikroskopie, R{\"o}ntgenbeugung unter streifendem Einfall und polarisationsmodulierter Infrarot-Reflexions-Absorptions-Spektroskopie wird die {\"A}nderung der Monoschichteigenschaften als Funktion eines {\"a}usseren Parametern analysiert. Dabei werden aus den R{\"o}ntgenbeugungsdaten quantitative Masse f{\"u}r die molekularen Wechselwirkungen und f{\"u}r die Kettenkonformationsordnung in Monoschichten abgeleitet. Zu den interessantesten Ergebnissen dieser Arbeit z{\"a}hlen die Aufkl{\"a}rung des Ursprungs von regelm{\"a}ssigen polygonalen und dendritischen Dom{\"a}nenformen, die vielf{\"a}ltige Wirkung von Cholesterin auf die Molek{\"u}lpackung und Gitterordnung langkettiger Amphiphile, sowie die Entdeckung einer abrupten {\"A}nderung in den Kopfgruppenbindungswechselwirkungen, der Kettenkonformationsordnung und des Phasen{\"u}bergangsdrucks zwischen geneigten Monoschichtphasen in Fetts{\"a}uremonoschichten nahe pH 9. Zur Deutung des letzten Punkts wird ein Modell f{\"u}r die Kopfgruppenbindungsstruktur von Fetts{\"a}uremonoschichten als Funktion des pH-Werts entwickelt.},
subject = {Wasseroberfl{\"a}che},
language = {en}
}