@phdthesis{Jaeger2015, author = {J{\"a}ger, Lena Ann}, title = {Working memory and prediction in human sentence parsing}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82517}, school = {Universit{\"a}t Potsdam}, pages = {xi, 144}, year = {2015}, abstract = {This dissertation investigates the working memory mechanism subserving human sentence processing and its relative contribution to processing difficulty as compared to syntactic prediction. Within the last decades, evidence for a content-addressable memory system underlying human cognition in general has accumulated (e.g., Anderson et al., 2004). In sentence processing research, it has been proposed that this general content-addressable architecture is also used for language processing (e.g., McElree, 2000). Although there is a growing body of evidence from various kinds of linguistic dependencies that is consistent with a general content-addressable memory subserving sentence processing (e.g., McElree et al., 2003; VanDyke2006), the case of reflexive-antecedent dependencies has challenged this view. It has been proposed that in the processing of reflexive-antecedent dependencies, a syntactic-structure based memory access is used rather than cue-based retrieval within a content-addressable framework (e.g., Sturt, 2003). Two eye-tracking experiments on Chinese reflexives were designed to tease apart accounts assuming a syntactic-structure based memory access mechanism from cue-based retrieval (implemented in ACT-R as proposed by Lewis and Vasishth (2005). In both experiments, interference effects were observed from noun phrases which syntactically do not qualify as the reflexive's antecedent but match the animacy requirement the reflexive imposes on its antecedent. These results are interpreted as evidence against a purely syntactic-structure based memory access. However, the exact pattern of effects observed in the data is only partially compatible with the Lewis and Vasishth cue-based parsing model. Therefore, an extension of the Lewis and Vasishth model is proposed. Two principles are added to the original model, namely 'cue confusion' and 'distractor prominence'. Although interference effects are generally interpreted in favor of a content-addressable memory architecture, an alternative explanation for interference effects in reflexive processing has been proposed which, crucially, might reconcile interference effects with a structure-based account. It has been argued that interference effects do not necessarily reflect cue-based retrieval interference in a content-addressable memory but might equally well be accounted for by interference effects which have already occurred at the moment of encoding the antecedent in memory (Dillon, 2011). Three experiments (eye-tracking and self-paced reading) on German reflexives and Swedish possessives were designed to tease apart cue-based retrieval interference from encoding interference. The results of all three experiments suggest that there is no evidence that encoding interference affects the retrieval of a reflexive's antecedent. Taken together, these findings suggest that the processing of reflexives can be explained with the same cue-based retrieval mechanism that has been invoked to explain syntactic dependency resolution in a range of other structures. This supports the view that the language processing system is located within a general cognitive architecture, with a general-purpose content-addressable working memory system operating on linguistic expressions. Finally, two experiments (self-paced reading and eye-tracking) using Chinese relative clauses were conducted to determine the relative contribution to sentence processing difficulty of working-memory processes as compared to syntactic prediction during incremental parsing. Chinese has the cross-linguistically rare property of being a language with subject-verb-object word order and pre-nominal relative clauses. This property leads to opposing predictions of expectation-based accounts and memory-based accounts with respect to the relative processing difficulty of subject vs. object relatives. Previous studies showed contradictory results, which has been attributed to different kinds local ambiguities confounding the materials (Lin and Bever, 2011). The two experiments presented are the first to compare Chinese relatives clauses in syntactically unambiguous contexts. The results of both experiments were consistent with the predictions of the expectation-based account of sentence processing but not with the memory-based account. From these findings, I conclude that any theory of human sentence processing needs to take into account the power of predictive processes unfolding in the human mind.}, language = {en} } @phdthesis{Beinrucker2015, author = {Beinrucker, Andre}, title = {Variable selection in high dimensional data analysis with applications}, school = {Universit{\"a}t Potsdam}, pages = {VII, 107}, year = {2015}, language = {en} } @phdthesis{Streich2015, author = {Streich, David}, title = {Understanding massive disk galaxy formation through resolved stellar populations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-81027}, school = {Universit{\"a}t Potsdam}, pages = {ix, 140}, year = {2015}, abstract = {In this thesis we utilize resolved stellar populations to improve our understanding of galaxy formation and evolution. In the first part we improve a method for metallicity determination of faint old stellar systems, in the second and third part we analyze the individual history of six nearby disk galaxies outside the Local Group. A New Calibration of the Color Metallicity Relation of Red Giants for HST data: It is well known, that the color distribution of stars on the the Red Giant Branch (RGB) can be used to determine metallicities of old stellar populations that have only shallow photometry. Based on the largest sample of globular clusters ever used for such studies, we quantify the relation between metallicity and color in the widely used HST ACS filters F606W and F814W. We use a sample of globular clusters from the ACS Globular Cluster Survey and measure their RGB color at given absolute magnitudes to derive the color-metallicity relation. We find a clear relation between metallicity and RGB color; we investigate the scatter and the uncertainties in this relation and show its limitations. A comparison with isochrones shows reasonably good agreement with BaSTI models, a small offset to Dartmouth models, and a larger offset to Padua models. Even for the best globular cluster data available, the metallicity of a simple stellar population can be determined from the RGB alone only with an accuracy of 0.3 dex for [M/H]<-1, and 0.15 dex for [M/H]>-1. For mixed populations, as they are observed in external galaxies, the uncertainties will be even larger due to uncertainties in extinction, age, etc. Therefore caution is necessary when interpreting photometric metallicities. The Structural History of Nearby Low Mass Disk Galaxies: We study the individual evolution histories of three nearby, low-mass, edge-on galaxies (IC5052, NGC4244, NGC5023). Using the color magnitude diagrams of resolved stellar populations, we construct star count density maps for populations of different ages and analyze the change of structural parameters with stellar age within each galaxy. The three galaxies show low vertical heating rates, which are much lower than the heating rate of the Milky Way. This indicates that heating agents, as giant molecular clouds and spiral structure are weak in low mass galaxies. We do not detect a separate thick disk in any of the three galaxies, even though our observations cover a larger range in equivalent surface brightness than any integrated light study. While scaleheights increase with age, each population can be well described by a single disk. Only two of the galaxies contain a very weak additional component, which we identify as the faint halo. The mass of these faint halos is less than 1\% of the mass of the disk. All populations in the three galaxies exhibit no or only little flaring. While this finding is consistent with previous integrated light studies, it poses strong constraints on galaxy formation models, because most theoretical simulations often find strong flaring due to interactions or radial migration. Furthermore, we find breaks in the radial profiles of all three galaxies. The radii of these breaks are independent of age, and the break strength is decreasing with age in two of the galaxies (NGC4244 and NGC5023). This is consistent with break formation models, that combine a star formation cutoff with radial migration. The differing behavior of IC5052 can be explained by a recent interaction or minor merger. The Structural History of Massive Disk Galaxies: We extend the structural analysis of stellar populations with distinct ages to three massive galaxies, NGC891, NGC4565 and NGC7814. While confusion effects due to the high stellar number densities in their central region, and the prominent dust lanes inhibit an detailed analysis of the radial profiles, we can study their vertical structure. These massive galaxies also have a slower heating than the Milky Way, comparable to the low mass galaxies. This can be traced back to their already thick young populations and thick layers of their interstellar medium. We do not find a clear separate thick disk in any of these three galaxies; all populations can be described by a single disk plus a S\'ersic bulge/halo component. In contrast to the low mass galaxies, we cannot rule out the presence of thick disks in the massive galaxies, because of the strong influence of the halo, that might hide the possible contribution of the thick disk to the vertical star count profiles. However, the faintness of the possible thick disks still points to problems in the earlier ubiquitous findings of thick disks in external galaxies.}, language = {en} } @phdthesis{Sauma2015, author = {Sauma, Natalia Zamora}, title = {Tsunami hazard analysis in Central America with emphasis on uncertainties}, school = {Universit{\"a}t Potsdam}, pages = {184}, year = {2015}, language = {en} } @phdthesis{Vossenkuhl2015, author = {Vossenkuhl, Birgit}, title = {Transmission of MRSA along the meat supply chain}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85918}, school = {Universit{\"a}t Potsdam}, pages = {141}, year = {2015}, abstract = {Methicillin-resistente Staphylococcus aureus (MRSA) z{\"a}hlen zu den bedeutendsten antibiotikaresistenten Pathogenen, die vor allem in Krankenh{\"a}usern aber auch außerhalb von Einrichtungen des Gesundheitswesens weit verbreitet sind. Seit einigen Jahren ist eine neue Generation von MRSA auf dem Vormarsch, die vor allem Nutztierbest{\"a}nde als neue Nische besiedelt. Diese sogenannten Nutztier-assoziierten MRSA wurden wiederholt bei wirtschaftlich bedeutenden Nutztieren sowie daraus gewonnenem Fleisch nachgewiesen. Im Rahmen der vorliegenden Arbeit wurde ein methodischer Ansatz verfolgt, um die Hypothese einer m{\"o}glichen {\"U}bertragung von Nutztier-assoziierten MRSA entlang der Lebensmittelkette vom Tier auf dessen Fleisch zu best{\"a}tigen. Angepasst an die Unterschiede in den verf{\"u}gbaren Daten wurden daf{\"u}r zwei neue Konzepte erstellt. Zur Analyse der {\"U}bertragung von MRSA entlang der Schlachtkette wurde ein mathematisches Modell des Schweineschlachtprozesses entwickelt, welches dazu geeignet ist, den Verlauf der MRSA-Pr{\"a}valenz entlang der Schlachtkette zu quantifizieren sowie kritische Prozessschritte f{\"u}r eine MRSA-{\"U}bertragung zu identifizieren. Anhand von Pr{\"a}valenzdaten ist es dem Modell m{\"o}glich, die durchschnittlichen MRSA-Eliminations- und Kontaminationsraten jedes einzelnen Prozessschrittes zu sch{\"a}tzen, die anschließend in eine Monte-Carlo-Simulation einfließen. Im Ergebnis konnte gezeigt werden, dass es generell m{\"o}glich ist, die MRSA Pr{\"a}valenz im Laufe des Schlachtprozesses auf ein niedriges finales Niveau zwischen 0,15 bis 1,15\% zu reduzieren. Vor allem das Br{\"u}hen und Abfl{\"a}mmen der Schlachtk{\"o}rper wurden als kritische Prozesse im Hinblick auf eine MRSA-Dekontamination identifiziert. In Deutschland werden regelm{\"a}ßig MRSA-Pr{\"a}valenz und Typisierungsdaten auf allen Stufen der Lebensmittelkette verschiedener Nutztiere erfasst. Um die MRSA-Daten dieser Querschnittstudie hinsichtlich einer m{\"o}glichen {\"U}bertragung entlang der Kette zu analysieren, wurde ein neuer statistischer Ansatz entwickelt. Hierf{\"u}r wurde eine Chi-Quadrat-Statistik mit der Berechnung des Czekanowski-{\"A}hnlichkeitsindex kombiniert, um Unterschiede in der Verteilung stammspezifischer Eigenschaften zwischen MRSA aus dem Stall, von Karkassen nach der Schlachtung und aus Fleisch im Einzelhandel zu quantifizieren. Die Methode wurde am Beispiel der Putenfleischkette implementiert und zudem bei der Analyse der Kalbfleischkette angewendet. Die durchgehend hohen {\"A}hnlichkeitswerte zwischen den einzelnen Proben weisen auf eine m{\"o}gliche {\"U}bertragung von MRSA entlang der Lebensmittelkette hin. Die erarbeiteten Methoden sind nicht spezifisch bez{\"u}glich Prozessketten und Pathogenen. Sie bieten somit einen großen Anwendungsbereich und erweitern das Methodenspektrum zur Bewertung bakterieller {\"U}bertragungswege.}, language = {en} } @phdthesis{Meyer2015, author = {Meyer, S{\"o}ren}, title = {Toxicity and toxicokinetics of arsenolipids and their metabolites}, school = {Universit{\"a}t Potsdam}, pages = {152, VIII}, year = {2015}, language = {en} } @phdthesis{SadrAzodi2015, author = {Sadr-Azodi, Amir Shahab}, title = {Towards Real-time SIEM-based Network monitoring and Intrusion Detection through Advanced Event Normalization}, school = {Universit{\"a}t Potsdam}, pages = {144}, year = {2015}, language = {en} } @phdthesis{ElKassar2015, author = {El Kassar, Nadja}, title = {Towards a theory of epistemically significant perception}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-044563-3}, school = {Universit{\"a}t Potsdam}, pages = {360}, year = {2015}, abstract = {How does perceptual experience make us knowledgeable? This book argues that the answer lies in the nature of perceptual experience: this experience involves conceptual capacities and is a relation between perceiver and world. The author develops her position via a critical examination of conceptualist and relationist theories of perception. A discussion of recent work in vision science rounds up this contribution to the philosophy of perception.}, language = {en} } @phdthesis{Jin2015, author = {Jin, Chenyu}, title = {Theoretical and experimental study of capillary effect on melting}, pages = {97}, year = {2015}, language = {en} } @phdthesis{Hainich2015, author = {Hainich, Rainer}, title = {The Wolf-Rayet stars of the nitrogen sequence in environments of different metallicities}, school = {Universit{\"a}t Potsdam}, pages = {161}, year = {2015}, language = {en} } @phdthesis{Rohrmann2015, author = {Rohrmann, Alexander}, title = {The role of wind and water in shaping earth's plateaus}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-77938}, school = {Universit{\"a}t Potsdam}, pages = {XXV, 157}, year = {2015}, abstract = {The overarching goal of this dissertation is to provide a better understanding of the role of wind and water in shaping Earth's Cenozoic orogenic plateaus - prominent high-elevation, low relief sectors in the interior of Cenozoic mountain belts. In particular, the feedbacks between surface uplift, the build-up of topography and ensuing changes in precipitation, erosion, and vegetation patterns are addressed in light of past and future climate change. Regionally, the study focuses on the two world's largest plateaus, the Altiplano-Puna Plateau of the Andes and Tibetan Plateau, both characterized by average elevations of >4 km. Both plateaus feature high, deeply incised flanks with pronounced gradients in rainfall, vegetation, hydrology, and surface processes. These characteristics are rooted in the role of plateaus to act as efficient orographic barriers to rainfall and to force changes in atmospheric flow. The thesis examines the complex topics of tectonic and climatic forcing of the surface-process regime on three different spatial and temporal scales: (1) bedrock wind-erosion rates are quantified in the arid Qaidam Basin of NW Tibet over millennial timescales using cosmogenic radionuclide dating; (2) present-day stable isotope composition in rainfall is examined across the south-central Andes in three transects between 22° S and 28° S; these data are modeled and assessed with remotely sensed rainfall data of the Tropical Rainfall Measuring Mission and the Moderate Resolution Imaging Spectroradiometer; (3) finally, a 2.5-km-long Mio-Pliocene sedimentary record of the intermontane Angastaco Basin (25°45' S, 66°00' W) is presented in the context of hydrogen and carbon compositions of molecular lipid biomarker, and oxygen and carbon isotopes obtained from pedogenic carbonates; these records are compared to other environmental proxies, including hydrated volcanic glass shards from volcanic ashes intercalated in the sedimentary strata. There are few quantitative estimates of eolian bedrock-removal rates from arid, low relief landscapes. Wind-erosion rates from the western Qaidam Basin based on cosmogenic 10Be measurements document erosion rates between 0.05 to 0.4 mm/yr. This finding indicates that in arid environments with strong winds, hyperaridity, exposure of friable strata, and ongoing rock deformation and uplift, wind erosion can outpace fluvial erosion. Large eroded sediment volumes within the Qaidam Basin and coeval dust deposition on the Chinese Loess plateau, exemplify the importance of dust production within arid plateau environments for marine and terrestrial depositional processes, but also health issues and fertilization of soils. In the south-central Andes, the analysis of 234 stream-water samples for oxygen and hydrogen reveals that areas experiencing deep convective storms do not show the commonly observed patterns of isotopic fractionation and the expected co-varying relationships between oxygen and hydrogen with increasing elevation. These convective storms are formed over semi-arid intermontane basins in the transition between the broken foreland of the Sierras Pampeanas, the Eastern Cordillera, and the Puna Plateau in the interior of the orogen. Here, convective rainfall dominates the precipitation budget and no systematic stable isotope-elevation relationship exists. Regions to the north, in the transition between the broken foreland and the Subandean foreland fold-and-thrust belt, the impact of convection is subdued, with lower degrees of storminess and a stronger expected isotope-elevation relationship. This finding of present-day fractionation trends of meteoric water is of great importance for paleoenvironmental studies in attempts to use stable isotope relationships in the reconstruction of paleoelevations. The third part of the thesis focuses on the paleohydrological characteristics of the Mio-Pliocene (10-2 Ma) Angastaco Basin sedimentary record, which reveals far-reaching environmental changes during Andean uplift and orographic barrier formation. A precipitation- evapotranspiration record identifies the onset of a precipitation regime related to the South American Low Level Jet at this latitude after 9 Ma. Humid foreland conditions existed until 7 Ma, followed by orographic barrier uplift to the east of the present-day Angastaco Basin. This was superseded by rapid (~0.5 Myr) aridification in an intermontane basin, highlighting the effects of eastward-directed deformation. A transition in vegetation cover from a humid C3 forest ecosystem to semi-arid C4-dominated vegetation was coeval with continued basin uplift to modern elevations.}, language = {en} } @phdthesis{Heyneke2015, author = {Heyneke, Elmien}, title = {The role of the calcineurin B-like interacting protein kinase, CIPK14 in regulating plant nutrient metabolism}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2015}, language = {en} } @phdthesis{Prieske2015, author = {Prieske, Olaf}, title = {The role of surface condition in athletic performance}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-80503}, school = {Universit{\"a}t Potsdam}, pages = {viii, 118, ix}, year = {2015}, abstract = {During the last two decades, instability training devices have become a popular means in athletic training and rehabilitation of mimicking unstable surfaces during movements like vertical jumps. Of note, under unstable conditions, trunk muscles seem to have a stabilizing function during exercise to facilitate the transfer of torques and angular momentum between the lower and upper extremities. The present thesis addresses the acute effects of surface instability on performance during jump-landing tasks. Additionally, the long-term effects (i.e., training) of surface instability were examined with a focus on the role of the trunk in athletic performance/physical fitness. Healthy adolescent, and young adult subjects participated in three cross-sectional and one longitudinal study, respectively. Performance in jump-landing tasks on stable and unstable surfaces was assessed by means of a ground reaction force plate. Trunk muscle strength (TMS) was determined using an isokinetic device or the Bourban TMS test. Physical fitness was quantified by standing long jump, sprint, stand-and-reach, jumping sideways, Emery balance, and Y balance test on stable surfaces. In addition, activity of selected trunk and leg muscles and lower limb kinematics were recorded during jump-landing tasks. When performing jump-landing tasks on unstable compared to stable surfaces, jump performance and leg muscle activity were significantly lower. Moreover, significantly smaller knee flexion angles and higher knee valgus angles were observed when jumping and landing on unstable compared to stable conditions and in women compared to men. Significant but small associations were found between behavioral and neuromuscular data, irrespective of surface condition. Core strength training on stable as well as on unstable surfaces significantly improved TMS, balance and coordination. The findings of the present thesis imply that stable rather than unstable surfaces provide sufficient training stimuli during jump exercises (i.e., plyometrics). Additionally, knee motion strategy during plyometrics appears to be modified by surface instability and sex. Of note, irrespective of surface condition, trunk muscles only play a minor role for leg muscle performance/activity during jump exercises. Moreover, when implemented in strength training programs (i.e., core strength training), there is no advantage in using instability training devices compared to stable surfaces in terms of enhancement of athletic performance.}, language = {en} } @phdthesis{Zupok2015, author = {Zupok, Arkadiusz}, title = {The psbB-operon is a major locus for plastome-genome incompatibility in Oenothera}, school = {Universit{\"a}t Potsdam}, pages = {108}, year = {2015}, language = {en} } @phdthesis{Reimer2015, author = {Reimer, Anna Maria}, title = {The poetics of the real and aesthetics of the reel}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-95660}, school = {Universit{\"a}t Potsdam}, pages = {298}, year = {2015}, abstract = {The dissertation proposes that the spread of photography and popular cinema in 19th- and 20th-century-India have shaped an aesthetic and affective code integral to the reading and interpretation of Indian English novels, particularly when they address photography and/or cinema film, as in the case of the four corpus texts. In analyzing the nexus between 'real' and 'reel', the dissertation shows how the texts address the reader as media consumer and virtual image projector. Furthermore, the study discusses the Indian English novel against the backdrop of the cultural and medial transformations of the 20th century to elaborate how these influenced the novel's aesthetics. Drawing upon reception aesthetics, the author devises the concept of the 'implied spectator' to analyze the aesthetic impact of the novels' images as visual textures. No God in Sight (2005) by Altaf Tyrewala comprises of a string of 41 interior monologues, loosely connected through their narrators' random encounters in Mumbai in the year 2000. Although marked by continuous perspective shifts, the text creates a sensation of acute immediacy. Here, the reader is addressed as implied spectator and is sutured into the narrated world like a film spectator ― an effect created through the use of continuity editing as a narrative technique. Similarly, Ruchir Joshi's The Last Jet Engine Laugh (2002) coll(oc)ates disparate narrative perspectives and explores photography as an artistic practice, historiographic recorder and epistemological tool. The narrative appears guided by the random viewing of old photographs by the protagonist and primary narrator, the photographer Paresh Bhatt. However, it is the photographic negative and the practice of superimposition that render this string of episodes and different perspectives narratively consequential and cosmologically meaningful. Photography thus marks the perfect symbiosis of autobiography and historiography. Tabish Khair's Filming. A Love Story (2007) immerses readers in the cine-aesthetic of 1930s and 40s Bombay film, the era in which the embedded plot is set. Plotline, central scenes and characters evoke the key films of Indian cinema history such as Satyajit Ray's "Pather Panchali" or Raj Kapoor's "Awara". Ultimately, the text written as film dissolves the boundary between fiction and (narrated) reality, reel and real, thereby showing that the images of individual memory are inextricably intertwined with and shaped by collective memory. Ultimately, the reconstruction of the past as and through film(s) conquers trauma and endows the Partition of India as a historic experience of brutal contingency with meaning. The Bioscope Man (Indrajit Hazra, 2008) is a picaresque narrative set in Calcutta - India's cultural capital and birthplace of Indian cinema at the beginning of the 20th century. The autodiegetic narrator Abani Chatterjee relates his rise and fall as silent film star, alternating between the modes of tell and show. He is both autodiegetic narrator and spectator or perceiving consciousness, seeing himself in his manifold screen roles. Beyond his film roles however, the narrator remains a void. The marked psychoanalytical symbolism of the text is accentuated by repeated invocations of dark caves and the laterna magica. Here too, 'reel life' mirrors and foreshadows real life as Indian and Bengali history again interlace with private history. Abani Chatterjee thus emerges as a quintessentially modern man of no qualities who assumes definitive shape only in the lost reels of the films he starred in. The final chapter argues that the static images and visual frames forwarded in the texts observe an integral psychological function: Premised upon linear perspective they imply a singular, static subjectivity appealing to the postmodern subject. In the corpus texts, the rise of digital technology in the 1990s thus appears not so much to have displaced older image repertories, practices and media techniques, than it has lent them greater visibility and appeal. Moreover, bricolage and pastiche emerge as cultural techniques which marked modernity from its inception. What the novels thus perpetuate is a media archeology not entirely servant to the poetics of the real. The permeable subject and the notion of the gaze as an active exchange as encapsulated in the concept of darshan - ideas informing all four texts - bespeak the resilience of a mythical universe continually re-instantiated in new technologies and uses. Eventually, the novels convey a sense of subalternity to a substantially Hindu nationalist history and historiography, the centrifugal force of which developed in the twentieth century and continues into the present.}, language = {en} } @phdthesis{Austin2015, author = {Austin, Gina}, title = {The mediating role of theory of mind in the relationship between executive function and conduct problems in elementary school-age children}, school = {Universit{\"a}t Potsdam}, pages = {171}, year = {2015}, language = {en} } @phdthesis{Geckin2015, author = {Geckin, Vasfiye}, title = {The interpretation of logical connections by monolingual and bilingual children}, pages = {ix, 181}, year = {2015}, language = {en} } @phdthesis{Hildebrandt2015, author = {Hildebrandt, Dominik}, title = {The HI Lyman-alpha opacity at redshift 2.7 < z < 3.6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-78355}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 292}, year = {2015}, abstract = {Most of the baryonic matter in the Universe resides in a diffuse gaseous phase in-between galaxies consisting mostly of hydrogen and helium. This intergalactic medium (IGM) is distributed in large-scale filaments as part of the overall cosmic web. The luminous extragalactic objects that we can observe today, such as galaxies and quasars, are surrounded by the IGM in the most dense regions within the cosmic web. The radiation of these objects contributes to the so-called ultraviolet background (UVB) which keeps the IGM highly ionized ever since the epoch of reionization. Measuring the amount of absorption due to intergalactic neutral hydrogen (HI) against extragalactic background sources is a very useful tool to constrain the energy input of ionizing sources into the IGM. Observations suggest that the HI Lyman-alpha effective optical depth, τ_eff, decreases with decreasing redshift, which is primarily due to the expansion of the Universe. However, some studies find a smaller value of the effective optical depth than expected at the specific redshift z~3.2, possibly related to the complete reionization of helium in the IGM and a hardening of the UVB. The detection and possible cause of a decrease in τ_eff at z~3.2 is controversially debated in the literature and the observed features need further explanation. To better understand the properties of the mean absorption at high redshift and to provide an answer for whether the detection of a τ_eff feature is real we study 13 high-resolution, high signal-to-noise ratio quasar spectra observed with the Ultraviolet and Visual Echelle Spectrograph (UVES) at the Very Large Telescope (VLT). The redshift evolution of the effective optical depth, τ_eff(z), is measured in the redshift range 2.7≤z≤3.6. The influence of metal absorption features is removed by performing a comprehensive absorption-line-fitting procedure. In the first part of the thesis, a line-parameter analysis of the column density, N, and Doppler parameter, b, of ≈7500 individually fitted absorption lines is performed. The results are in good agreement with findings from previous surveys. The second (main) part of this thesis deals with the analysis of the redshift evolution of the effective optical depth. The τ_eff measurements vary around the empirical power law τ_eff(z)~(1+z)^(γ+1) with γ=2.09±0.52. The same analysis as for the observed spectra is performed on synthetic absorption spectra. From a comparison between observed and synthetic spectral data it can be inferred that the uncertainties of the τ_eff values are likely underestimated and that the scatter is probably caused by high-column-density absorbers with column densities in the range 15≤logN≤17. In the real Universe, such absorbers are rarely observed, however. Hence, the difference in τ_eff from different observational data sets and absorption studies is most likely caused by cosmic variance. If, alternatively, the disagreement between such data is a result of an too optimistic estimate of the (systematic) errors, it is also possible that all τ_eff measurements agree with a smooth evolution within the investigated redshift range. To explore in detail the different analysis techniques of previous studies an extensive literature comparison to the results of this work is presented in this thesis. Although a final explanation for the occurrence of the τ_eff deviation in different studies at z~3.2 cannot be given here, our study, which represents the most detailed line-fitting analysis of its kind performed at the investigated redshifts so far, represents another important benchmark for the characterization of the HI Ly-alpha effective optical depth at high redshift and its indicated unusual behavior at z~3.2.}, language = {en} } @phdthesis{Jantz2015, author = {Jantz, Bastian}, title = {The dynamics of accountability in public sector reforms}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-78131}, school = {Universit{\"a}t Potsdam}, pages = {182}, year = {2015}, abstract = {This PhD thesis is essentially a collection of six sequential articles on dynamics of accountability in the reformed employment and welfare administration in different countries. The first article examines how recent changes in the governance of employment services in three European countries (Denmark, Germany and Norway) have influenced accountability relationships from a very wide-ranging perspective. It starts from the overall assumption in the literature that accountability relationships are becoming more numerous and complex, and that these changes may lead to multiple accountability disorder. The article explores these assumptions by analyzing the different actors involved and the information requested in the new governance arrangements in all three countries. It concludes that the considerable changes in organizational arrangements and more managerial information demanded and provided have led to more shared forms of accountability. Nevertheless, a clear development towards less political or administrative accountability could not be observed. The second article analyzes how the structure and development of reform processes affect accountability relationships and via what mechanisms. It is distinguished between an instrumental perspective and an institutional perspective and each of these perspectives takes a different view on the link between reforms and concrete action and results. By taking the welfare reforms in Norway and Germany as an example, it is shown that the reform outcomes in both countries are the result of a complex process of powering, puzzling and institutional constraints where different situational interpretations of problems, interests and administrative legacies had to be balanced. Accountability thus results not from a single process of environmental necessity or strategic choice, but from a dynamic interplay between different actors and institutional spheres. The third article then covers a specific instrument of public sector reforms, i.e. the increasing use of performance management. The article discusses the challenges and ambiguities between performance management and different forms of accountability based on the cases of the reformed welfare administration in Norway and Germany. The findings are that the introduction of performance management creates new accountability structures which influence service delivery, but not necessarily in the direction expected by reform agents. Observed unintended consequences include target fixation, the displacement of political accountability and the predominance of control aspects of accountability. The fourth article analyzes the accountability implications of the increasingly marketized models of welfare governance. It has often been argued that relocating powers and discretion to private contractors involve a trade-off between democratic accountability and efficiency. However, there is limited empirical evidence of how contracting out shapes accountability or is shaped by alternative democratic or administrative forms of accountability. Along these lines the article examines employment service accountability in the era of contracting out in Germany, Denmark and Great Britain. It is found that market accountability instruments are complementary instruments, not substitutes. The findings highlight the importance of administrative and political instruments in legitimizing marketized service provision and shed light on the processes that lead to the development of a hybrid accountability model. The fifth and sixth articles focus on the diagonal accountability relationships between public agencies, supreme audit institutions (SAI) and parental ministry or parliament. The fifth article examines the evolving role of SAIs in Denmark, Germany and Norway focusing particularly on their contribution to public accountability and their ambivalent relationship with some aspects of public sector reform in the welfare sector. The article analyzes how SAIs assess New Public Management inspired reforms in the welfare sector in the three countries. The analysis shows that all three SAIs have taken on an evaluative role when judging New Public Management instruments. At the same time their emphasis on legality and compliance can be at odds with some of the operating principles introduced by New Public Management reforms. The sixth article focuses on the auditing activities of the German SAI in the field of labor market administration as a single in-depth case study. The purpose is to analyze how SAIs gain impact in diagonal accountability settings. The results show that the direct relationship between auditor and auditee based on cooperation and trust is of outstanding importance for SAIs to give effect to their recommendations. However, if an SAI has to rely on actors of diagonal accountability, it is in a vulnerable position as it might lose control over the interpretation of its results.}, language = {en} } @phdthesis{Hunke2015, author = {Hunke, Philip Paul}, title = {The Brazilian Cerrado: ecohydrological assessment of water and soil degradation in heavily modified meso-scale catchments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85110}, school = {Universit{\"a}t Potsdam}, pages = {xi, 124}, year = {2015}, abstract = {The Brazilian Cerrado is recognised as one of the most threatened biomes in the world, as the region has experienced a striking change from natural vegetation to intense cash crop production. The impacts of rapid agricultural expansion on soil and water resources are still poorly understood in the region. Therefore, the overall aim of the thesis is to improve our understanding of the ecohydrological processes causing water and soil degradation in the Brazilian Cerrado. I first present a metaanalysis to provide quantitative evidence and identifying the main impacts of soil and water alterations resulting from land use change. Second, field studies were conducted to (i) examine the effects of land use change on soils of natural cerrado transformed to common croplands and pasture and (ii) indicate how agricultural production affects water quality across a meso-scale catchment. Third, the ecohydrological process-based model SWAT was tested with simple scenario analyses to gain insight into the impacts of land use and climate change on the water cycling in the upper S{\~a}o Louren{\c{c}}o catchment which experienced decreasing discharges in the last 40 years. Soil and water quality parameters from different land uses were extracted from 89 soil and 18 water studies in different regions across the Cerrado. Significant effects on pH, bulk density and available P and K for croplands and less-pronounced effects on pastures were evident. Soil total N did not differ between land uses because most of the cropland sites were N-fixing soybean cultivations, which are not artificially fertilized with N. By contrast, water quality studies showed N enrichment in agricultural catchments, indicating fertilizer impacts and potential susceptibility to eutrophication. Regardless of the land use, P is widely absent because of the high-fixing capacities of deeply weathered soils and the filtering capacity of riparian vegetation. Pesticides, however, were consistently detected throughout the entire aquatic system. In several case studies, extremely high-peak concentrations exceeded Brazilian and EU water quality limits, which pose serious health risks. My field study revealed that land conversion caused a significant reduction in infiltration rates near the soil surface of pasture (-96 \%) and croplands (-90 \% to -93 \%). Soil aggregate stability was significantly reduced in croplands than in cerrado and pasture. Soybean crops had extremely high extractable P (80 mg kg-1), whereas pasture N levels declined. A snapshot water sampling showed strong seasonality in water quality parameters. Higher temperature, oxi-reduction potential (ORP), NO2-, and very low oxygen concentrations (<5 mg•l-1) and saturation (<60 \%) were recorded during the rainy season. By contrast, remarkably high PO43- concentrations (up to 0.8 mg•l-1) were measured during the dry season. Water quality parameters were affected by agricultural activities at all sampled sub-catchments across the catchment, regardless of stream characteristic. Direct NO3- leaching appeared to play a minor role; however, water quality is affected by topsoil fertiliser inputs with impact on small low order streams and larger rivers. Land conversion leaving cropland soils more susceptible to surface erosion by increased overland flow events. In a third study, the field data were used to parameterise SWAT. The model was tested with different input data and calibrated in SWAT-CUP using the SUFI-2 algorithm. The model was judged reliable to simulate the water balance in the Cerrado. A complete cerrado, pasture and cropland cover was used to analyse the impact of land use on water cycling as well as climate change projections (2039-2058) according to the projections of the RCP 8.5 scenario. The actual evapotranspiration (ET) for the cropland scenario was higher compared to the cerrado cover (+100 mm a-1). Land use change scenarios confirmed that deforestation caused higher annual ET rates explaining partly the trend of decreased streamflow. Taking all climate change scenarios into account, the most likely effect is a prolongation of the dry season (by about one month), with higher peak flows in the rainy season. Consequently, potential threats for crop production with lower soil moisture and increased erosion and sediment transport during the rainy season are likely and should be considered in adaption plans. From the three studies of the thesis I conclude that land use intensification is likely to seriously limit the Cerrado's future regarding both agricultural productivity and ecosystem stability. Because only limited data are available for the vast biome, we recommend further field studies to understand the interaction between terrestrial and aquatic systems. This thesis may serve as a valuable database for integrated modelling to investigate the impact of land use and climate change on soil and water resources and to test and develop mitigation measures for the Cerrado in the future.}, language = {en} } @phdthesis{Mucha2015, author = {Mucha, Anne}, title = {Temporal interpretation and cross-linguistic variation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85935}, school = {Universit{\"a}t Potsdam}, pages = {x, 249}, year = {2015}, abstract = {This thesis investigates temporal and aspectual reference in the typologically unrelated African languages Hausa (Chadic, Afro-Asiatic) and Medumba (Grassfields Bantu). It argues that Hausa is a genuinely tenseless language and compares the interpretation of temporally unmarked sentences in Hausa to that of morphologically tenseless sentences in Medumba, where tense marking is optional and graded. The empirical behavior of the optional temporal morphemes in Medumba motivates an analysis as existential quantifiers over times and thus provides new evidence suggesting that languages vary in whether their (past) tense is pronominal or quantificational (see also Sharvit 2014). The thesis proposes for both Hausa and Medumba that the alleged future tense marker is a modal element that obligatorily combines with a prospective future shifter (which is covert in Medumba). Cross-linguistic variation in whether or not a future marker is compatible with non-future interpretation is proposed to be predictable from the aspectual architecture of the given language.}, language = {en} } @phdthesis{Quast2015, author = {Quast, Robert B.}, title = {Synthesis and site-directed modification of membrane proteins using non-canonical amino acids in a cell-free system derived from cultured Spodoptera frugiperda cells}, school = {Universit{\"a}t Potsdam}, pages = {87}, year = {2015}, language = {en} } @phdthesis{Vlasov2015, author = {Vlasov, Vladimir}, title = {Synchronization of oscillatory networks in terms of global variables}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-78182}, school = {Universit{\"a}t Potsdam}, pages = {82}, year = {2015}, abstract = {Synchronization of large ensembles of oscillators is an omnipresent phenomenon observed in different fields of science like physics, engineering, life sciences, etc. The most simple setup is that of globally coupled phase oscillators, where all the oscillators contribute to a global field which acts on all oscillators. This formulation of the problem was pioneered by Winfree and Kuramoto. Such a setup gives a possibility for the analysis of these systems in terms of global variables. In this work we describe nontrivial collective dynamics in oscillator populations coupled via mean fields in terms of global variables. We consider problems which cannot be directly reduced to standard Kuramoto and Winfree models. In the first part of the thesis we adopt a method introduced by Watanabe and Strogatz. The main idea is that the system of identical oscillators of particular type can be described by a low-dimensional system of global equations. This approach enables us to perform a complete analytical analysis for a special but vast set of initial conditions. Furthermore, we show how the approach can be expanded for some nonidentical systems. We apply the Watanabe-Strogatz approach to arrays of Josephson junctions and systems of identical phase oscillators with leader-type coupling. In the next parts of the thesis we consider the self-consistent mean-field theory method that can be applied to general nonidentical globally coupled systems of oscillators both with or without noise. For considered systems a regime, where the global field rotates uniformly, is the most important one. With the help of this approach such solutions of the self-consistency equation for an arbitrary distribution of frequencies and coupling parameters can be found analytically in the parametric form, both for noise-free and noisy cases. We apply this method to deterministic Kuramoto-type model with generic coupling and an ensemble of spatially distributed oscillators with leader-type coupling. Furthermore, with the proposed self-consistent approach we fully characterize rotating wave solutions of noisy Kuramoto-type model with generic coupling and an ensemble of noisy oscillators with bi-harmonic coupling. Whenever possible, a complete analysis of global dynamics is performed and compared with direct numerical simulations of large populations.}, language = {en} } @phdthesis{Feldmann2015, author = {Feldmann, Johannes}, title = {Stability of the West Antarctic Ice Sheet}, pages = {v, 165}, year = {2015}, language = {en} } @phdthesis{Mulyukova2015, author = {Mulyukova, Elvira}, title = {Stability of the large low shear velocity provinces}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82228}, school = {Universit{\"a}t Potsdam}, pages = {139}, year = {2015}, abstract = {We study segregation of the subducted oceanic crust (OC) at the core mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces - LLSVPs). Our high-resolution numerical simulations suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC-material to the CMB, and the rate of its entrainment away from the CMB by mantle upwellings. For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirring - where thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous material - best resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantle - it is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large scale compositional anomalies similar in shape to the LLSVPs. We have developed an efficient FEM code with dynamically adaptive time and space resolution, and marker-in-cell methodology. This enabled us to model thermochemical mantle convection at realistically high convective vigor, strong thermally induced viscosity variations, and long term evolution of compositional fields.}, language = {en} } @phdthesis{Kuenstler2015, author = {K{\"u}nstler, Andreas}, title = {Spot evolution on the red giant star XX Triangulum}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-84008}, school = {Universit{\"a}t Potsdam}, year = {2015}, abstract = {Spots on stellar surfaces are thought to be stellar analogues of sunspots. Thus, starspots are direct manifestations of strong magnetic fields. Their decay rate is directly related to the magnetic diffusivity, which itself is a key quantity for the deduction of an activity cycle length. So far, no single starspot decay has been observed, and thus no stellar activity cycle was inferred from its corresponding turbulent diffusivity. We investigate the evolution of starspots on the rapidly-rotating K0 giant XX Triangulum. Continuous high-resolution and phase-resolved spectroscopy was obtained with the robotic 1.2-m STELLA telescope on Tenerife over a timespan of six years. With our line-profile inversion code iMap we reconstruct a total of 36 consecutive Doppler maps. To quantify starspot area decay and growth, we match the observed images with simplified spot models based on a Monte-Carlo approach. It is shown that the surface of XX Tri is covered with large high-latitude and even polar spots and with occasional small equatorial spots. Just over the course of six years, we see a systematically changing spot distribution with various time scales and morphology such as spot fragmentation and spot merging as well as spot decay and formation. For the first time, a starspot decay rate on another star than the Sun is determined. From our spot-decay analysis we determine an average linear decay rate of D = -0.067±0.006 Gm^2/day. From this decay rate, we infer a turbulent diffusivity of η_τ = (6.3±0.5) x 10^14 cm^2/s and consequently predict an activity cycle of 26±6 years. The obtained cycle length matches very well with photometric observations. Our time-series of Doppler maps further enables to investigate the differential rotation of XX Tri. We therefore applied a cross-correlation analysis. We detect a weak solar-like differential rotation with a surface shear of α = 0.016±0.003. This value agrees with similar studies of other RS CVn stars. Furthermore, we found evidence for active longitudes and flip-flops. Whereas the more active longitude is located in phase towards the (unseen) companion star, the weaker active longitude is located at the opposite stellar hemisphere. From their periodic appearance, we infer a flip-flop cycle of ~2 years. Both activity phenomena are common on late-type binary stars. Last but not least we redetermine several astrophysical properties of XX Tri and its binary system, as large datasets of photometric and spectroscopic observations are available since its last determination in 1999. Additionally, we compare the rotational spot-modulation from photometric and spectroscopic studies.}, language = {en} } @phdthesis{Maerten2015, author = {Maerten, Lena}, title = {Spectroscopic perspectives on ultrafast coupling phenomena in perovskite oxides}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-77623}, school = {Universit{\"a}t Potsdam}, year = {2015}, abstract = {In this thesis, I study ultrafast dynamics in perovskite oxides using time resolved broadband spectroscopy. I focus on the observation of coherent phonon propagation by time resolved Brillouin scattering: following the excition of metal transducer films with a femtosecond infrared pump pulse, coherent phonon dynamics in the GHz frequency range are triggered. Their propagation is monitored using a delayed white light probe pulse. The technique is illustrated on various thin films and multilayered samples. I apply the technique to investigate the linear and nonlinear acoustic response in bulk SrTiO_3, which displays a ferroelastic phase transition from a cubic to a tetragonal structural phase at T_a=105 K. In the linear regime, I observe a coupling of the observed acoustic phonon mode to the softening optic modes describing the phase transition. In the nonlinear regime, I find a giant slowing down of the sound velocity in the low temperature phase that is only observable for a strain amplitude exceeding the tetragonality of the material. It is attributed to a coupling of the high frequency phonons to ferroelastic domain walls in the material. I propose a new mechanism for the coupling of strain waves to the domain walls that is only effective for high amplitude strain. A detailed study of the phonon attenuation across a wide temperature range shows that the phonon attenuation at low temperatures is influenced by the domain configuration, which is determined by interface strain. Preliminary measurements on magnetic-ferroelectric multilayers reveal that the excitation fluence needs to be carefully controlled when dynamics at phase transitions are studied.}, language = {en} } @phdthesis{Brosinsky2015, author = {Brosinsky, Arlena}, title = {Spectral fingerprinting}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83369}, school = {Universit{\"a}t Potsdam}, pages = {VI, 117}, year = {2015}, abstract = {Current research on runoff and erosion processes, as well as an increasing demand for sustainable watershed management emphasize the need for an improved understanding of sediment dynamics. This involves the accurate assessment of erosion rates and sediment transfer, yield and origin. A variety of methods exist to capture these processes at the catchment scale. Among these, sediment fingerprinting, a technique to trace back the origin of sediment, has attracted increasing attention by the scientific community in recent years. It is a two-step procedure, based on the fundamental assumptions that potential sources of sediment can be reliably discriminated based on a set of characteristic 'fingerprint' properties, and that a comparison of source and sediment fingerprints allows to quantify the relative contribution of each source. This thesis aims at further assessing the potential of spectroscopy to assist and improve the sediment fingerprinting technique. Specifically, this work focuses on (1) whether potential sediment sources can be reliably identified based on spectral features ('fingerprints'), whether (2) these spectral fingerprints permit the quantification of relative source contribution, and whether (3) in situ derived source information is sufficient for this purpose. Furthermore, sediment fingerprinting using spectral information is applied in a study catchment to (4) identify major sources and observe how relative source contributions change between and within individual flood events. And finally, (5) spectral fingerprinting results are compared and combined with simultaneous sediment flux measurements to study sediment origin, transport and storage behaviour. For the sediment fingerprinting approach, soil samples were collected from potential sediment sources within the Is{\´a}bena catchment, a meso-scale basin in the central Spanish Pyrenees. Undisturbed samples of the upper soil layer were measured in situ using an ASD spectroradiometer and subsequently sampled for measurements in the laboratory. Suspended sediment was sampled automatically by means of ISCO samplers at the catchment as well as at the five major subcatchment outlets during flood events, and stored fine sediment from the channel bed was collected from 14 cross-sections along the main river. Artificial mixtures of known contributions were produced from source soil samples. Then, all source, sediment and mixture samples were dried and spectrally measured in the laboratory. Subsequently, colour coefficients and physically based features with relation to organic carbon, iron oxide, clay content and carbonate, were calculated from all in situ and laboratory spectra. Spectral parameters passing a number of prerequisite tests were submitted to principal component analyses to study natural clustering of samples, discriminant function analyses to observe source differentiation accuracy, and a mixing model for source contribution assessment. In addition, annual as well as flood event based suspended sediment fluxes from the catchment and its subcatchments were calculated from rainfall, water discharge and suspended sediment concentration measurements using rating curves and Quantile Regression Forests. Results of sediment flux monitoring were interpreted individually with respect to storage behaviour, compared to fingerprinting source ascriptions and combined with fingerprinting to assess their joint explanatory potential. In response to the key questions of this work, (1) three source types (land use) and five spatial sources (subcatchments) could be reliably discriminated based on spectral fingerprints. The artificial mixture experiment revealed that while (2) laboratory parameters permitted source contribution assessment, (3) the use of in situ derived information was insufficient. Apparently, high discrimination accuracy does not necessarily imply good quantification results. When applied to suspended sediment samples of the catchment outlet, the spectral fingerprinting approach was able to (4) quantify the major sediment sources: badlands and the Villacarli subcatchment, respectively, were identified as main contributors, which is consistent with field observations and previous studies. Thereby, source contribution was found to vary both, within and between individual flood events. Also sediment flux was found to vary considerably, annually as well as seasonally and on flood event base. Storage was confirmed to play an important role in the sediment dynamics of the studied catchment, whereas floods with lower total sediment yield tend to deposit and floods with higher yield rather remove material from the channel bed. Finally, a comparison of flux measurements with fingerprinting results highlighted the fact that (5) immediate transport from sources to the catchment outlet cannot be assumed. A combination of the two methods revealed different aspects of sediment dynamics that none of the techniques could have uncovered individually. In summary, spectral properties provide a fast, non-destructive, and cost-efficient means to discriminate and quantify sediment sources, whereas, unfortunately, straight-forward in situ collected source information is insufficient for the approach. Mixture modelling using artificial mixtures permits valuable insights into the capabilities and limitations of the method and similar experiments are strongly recommended to be performed in the future. Furthermore, a combination of techniques such as e.g. (spectral) sediment fingerprinting and sediment flux monitoring can provide comprehensive understanding of sediment dynamics.}, language = {en} } @phdthesis{Hanf2015, author = {Hanf, Franziska Stefanie}, title = {South Asian summer monsoon variability: a modelling study with the atmospheric regional climate model HIRHAM5}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-89331}, school = {Universit{\"a}t Potsdam}, pages = {ii, 126}, year = {2015}, abstract = {The lives of more than 1/6 th of the world population is directly affected by the caprices of the South Asian summer monsoon rainfall. India receives around 78 \% of the annual precipitation during the June-September months, the summer monsoon season of South Asia. But, the monsoon circulation is not consistent throughout the entire summer season. Episodes of heavy rainfall (active periods) and low rainfall (break periods) are inherent to the intraseasonal variability of the South Asian summer monsoon. Extended breaks or long-lasting dryness can result in droughts and hence trigger crop failures and in turn famines. Furthermore, India's electricity generation from renewable sources (wind and hydro-power), which is increasingly important in order to satisfy the rapidly rising demand for energy, is highly reliant on the prevailing meteorology. The major drought years 2002 and 2009 for the Indian summer monsoon during the last decades, which are results of the occurrence of multiple extended breaks, emphasise exemplary that the understanding of the monsoon system and its intraseasonal variation is of greatest importance. Although, numerous studies based on observations, reanalysis data and global model simulations have been carried out with the focus on monsoon active and break phases over India, the understanding of the monsoon intraseasonal variability is only in the infancy stage. Regional climate models could benefit the comprehension of monsoon breaks by its resolution advantage. This study investigates moist dynamical processes that initiate and maintain breaks during the South Asian summer monsoon using the atmospheric regional climate model HIRHAM5 at a horizontal resolution of 25 km forced by the ECMWF ERA Interim reanalysis for the period 1979-2012. By calculating moisture and moist static energy budgets the various competing mechanisms leading to extended breaks are quantitatively estimated. Advection of dry air from the deserts of western Asia towards central India is the dominant moist dynamical process in initiating extended break conditions over South Asia. Once initiated, the extended breaks are maintained due to many competing mechanisms: (i) the anomalous easterlies at the southern flank of this anticyclonic anomaly weaken the low-level cross-equatorial jet and thus the moisture transport into the monsoon region, (ii) differential radiative heating over the continental and the oceanic tropical convergence zone induces a local Hadley circulation with anomalous rising over the equatorial Indian Ocean and descent over central India, and (iii) a cyclonic response to positive rainfall anomalies over the near-equatorial Indian Ocean amplifies the anomalous easterlies over India and hence contributes to the low-level divergence over central India. A sensitivity experiment that mimics a scenario of higher atmospheric aerosol concentrations over South Asia addresses a current issue of large uncertainty: the role aerosols play in suppressing monsoon rainfall and hence in triggering breaks. To study the indirect aerosol effects the cloud droplet number concentration was increased to imitate the aerosol's function as cloud condensation nuclei. The sensitivity experiment with altered microphysical cloud properties shows a reduction in the summer monsoon precipitation together with a weakening of the South Asian summer monsoon. Several physical mechanisms are proposed to be responsible for the suppressed monsoon rainfall: (i) according to the first indirect radiative forcing the increase in the number of cloud droplets causes an increase in the cloud reflectivity of solar radiation, leading to a climate cooling over India which in turn reduces the hydrological cycle, (ii) a stabilisation of the troposphere induced by a differential cooling between the surface and the upper troposphere over central India inhibits the growth of deep convective rain clouds, (iii) an increase of the amount of low and mid-level clouds together with a decrease in high-level cloud amount amplify the surface cooling and hence the atmospheric stability, and (iv) dynamical changes of the monsoon manifested as a anomalous anticyclonic circulation over India reduce the moisture transport into the monsoon region. The study suggests that the changes in the total precipitation, which are dominated by changes in the convective precipitation, mainly result from the indirect radiative forcing. Suppression of rainfall due to the direct microphysical effect is found to be negligible over India. Break statistics of the polluted cloud scenario indicate an increase in the occurrence of short breaks (3 days), while the frequency of extended breaks (> 7 days) is clearly not affected. This disproves the hypothesis that more and smaller cloud droplets, caused by a high load of atmospheric aerosols trigger long drought conditions over central India.}, language = {en} } @phdthesis{Kulikova2015, author = {Kulikova, Galina}, title = {Source parameters of the major historical earthquakes in the Tien-Shan region from the late 19th to the early 20th century}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-88370}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 164}, year = {2015}, abstract = {The Tien-Shan and the neighboring Pamir region are two of the largest mountain belts in the world. Their deformation is dominated by intermontane basins bounded by active thrust and reverse faulting. The Tien-Shan mountain belt is characterized by a very high rate of seismicity along its margins as well as within the Tien-Shan interior. The study area of the here presented thesis, the western part of the Tien-Shan region, is currently seismically active with small and moderate sized earthquakes. However, at the end of the 19th beginning of the 20th century, this region was struck by a remarkable series of large magnitude (M>7) earthquakes, two of them reached magnitude 8. Those large earthquakes occurred prior to the installation of the global digital seismic network and therefore were recorded only by analog seismic instruments. The processing of the analog data brings several difficulties, for example, not always the true parameters of the recording system are known. Another complicated task is the digitization of those records - a very time-consuming and delicate part. Therefore a special set of techniques is developed and modern methods are adapted for the digitized instrumental data analysis. The main goal of the presented thesis is to evaluate the impact of large magnitude M≥7.0 earthquakes, which occurred at the turn of 19th to 20th century in the Tien-Shan region, on the overall regional tectonics. A further objective is to investigate the accuracy of previously estimated source parameters for those earthquakes, which were mainly based on macroseismic observations, and re-estimate them based on the instrumental data. An additional aim of this study is to develop the tools and methods for faster and more productive usage of analog seismic data in modern seismology. In this thesis, the ten strongest and most interesting historical earthquakes in Tien-Shan region are analyzed. The methods and tool for digitizing and processing the analog seismic data are presented. The source parameters of the two major M≥8.0 earthquakes in the Northern Tien-Shan are re-estimated in individual case studies. Those studies are published as peer-reviewed scientific articles in reputed journals. Additionally, the Sarez-Pamir earthquake and its connection with one of the largest landslides in the world, Usoy landslide, is investigated by seismic modeling. These results are also published as a research paper. With the developed techniques, the source parameters of seven more major earthquakes in the region are determined and their impact on the regional tectonics was investigated. The large magnitudes of those earthquakes are confirmed by instrumental data. The focal mechanism of these earthquakes were determined providing evidence for responsible faults or fault systems.}, language = {en} } @phdthesis{Nimz2015, author = {Nimz, Katharina}, title = {Sound perception and production in a foreign language}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-361-9}, issn = {2190-4545}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-88794}, school = {Universit{\"a}t Potsdam}, pages = {xix, 236}, year = {2015}, abstract = {The present study addresses the question of how German vowels are perceived and produced by Polish learners of German as a Foreign Language. It comprises three main experiments: a discrimination experiment, a production experiment, and an identification experiment. With the exception of the discrimination task, the experiments further investigated the influence of orthographic marking on the perception and production of German vowel length. It was assumed that explicit markings such as the Dehnungs-h ("lengthening h") could help Polish GFL learners in perceiving and producing German words more correctly. The discrimination experiment with manipulated nonce words showed that Polish GFL learners detect pure length differences in German vowels less accurately than German native speakers, while this was not the case for pure quality differences. The results of the identification experiment contrast with the results of the discrimination task in that Polish GFL learners were better at judging incorrect vowel length than incorrect vowel quality in manipulated real words. However, orthographic marking did not turn out to be the driving factor and it is suggested that metalinguistic awareness can explain the asymmetry between the two perception experiments. The production experiment supported the results of the identification task in that lengthening h did not help Polish learners in producing German vowel length more correctly. Yet, as far as vowel quality productions are concerned, it is argued that orthography does influence L2 sound productions because Polish learners seem to be negatively influenced by their native grapheme-to-phoneme correspondences. It is concluded that it is important to differentiate between the influence of the L1 and L2 orthographic system. On the one hand, the investigation of the influence of orthographic vowel length markers in German suggests that Polish GFL learners do not make use of length information provided by the L2 orthographic system. On the other hand, the vowel quality data suggest that the L1 orthographic system plays a crucial role in the acquisition of a foreign language. It is therefore proposed that orthography influences the acquisition of foreign sounds, but not in the way it was originally assumed.}, language = {en} } @phdthesis{Tomaszewska2015, author = {Tomaszewska, Paulina}, title = {Sexual aggression victimization and perpetration among Polish Youth}, school = {Universit{\"a}t Potsdam}, pages = {200}, year = {2015}, language = {en} } @phdthesis{Soulie2015, author = {Souli{\´e}, Virginie}, title = {Sessile droplets of salt solutions on inert and metallic surfaces}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90329}, school = {Universit{\"a}t Potsdam}, year = {2015}, abstract = {In this thesis we investigate the evaporation behaviour of sessile droplets of aqueous saline solutions on planar inert and metallic surfaces and characterise the corrosion phenomenon for iron surfaces. First we study the evaporation behaviour of sessile salty droplets on inert surfaces for a wide range of salt concentrations, relative humidities, droplet sizes and contact angles. Our study reveals the range of validity of the well-accepted diffusion-controlled evaporation model and highlights the impact of salt concentration (surface tension) gradients driven Marangoni flows on the evaporation behaviour and the subsequent salty deposit patterns. Furthermore we study the spatial-temporal evolution of sessile droplets from saline solutions on metallic surfaces. In contrast to the simple, generally accepted Evans droplet model, we show that the corrosion spreads ahead of the macroscopic contact line with a peripheral film. The three-phase contact line is destabilized by surface tension gradients induced by ionic composition changes during the course of the corrosion process and migration of cations towards the droplet perimeter. Finally we investigate the corrosion behaviour under drying salty sessile droplets on metallic surfaces. The corrosion process, in particular the location of anodic and cathodic activities over the footprint droplet area is correlated to the spatial distribution of the salt inside the drying droplet.}, language = {en} } @phdthesis{Wallenta2015, author = {Wallenta, Daniel}, title = {Sequences of compact curvature}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87489}, school = {Universit{\"a}t Potsdam}, pages = {viii, 73}, year = {2015}, abstract = {By perturbing the differential of a (cochain-)complex by "small" operators, one obtains what is referred to as quasicomplexes, i.e. a sequence whose curvature is not equal to zero in general. In this situation the cohomology is no longer defined. Note that it depends on the structure of the underlying spaces whether or not an operator is "small." This leads to a magical mix of perturbation and regularisation theory. In the general setting of Hilbert spaces compact operators are "small." In order to develop this theory, many elements of diverse mathematical disciplines, such as functional analysis, differential geometry, partial differential equation, homological algebra and topology have to be combined. All essential basics are summarised in the first chapter of this thesis. This contains classical elements of index theory, such as Fredholm operators, elliptic pseudodifferential operators and characteristic classes. Moreover we study the de Rham complex and introduce Sobolev spaces of arbitrary order as well as the concept of operator ideals. In the second chapter, the abstract theory of (Fredholm) quasicomplexes of Hilbert spaces will be developed. From the very beginning we will consider quasicomplexes with curvature in an ideal class. We introduce the Euler characteristic, the cone of a quasiendomorphism and the Lefschetz number. In particular, we generalise Euler's identity, which will allow us to develop the Lefschetz theory on nonseparable Hilbert spaces. Finally, in the third chapter the abstract theory will be applied to elliptic quasicomplexes with pseudodifferential operators of arbitrary order. We will show that the Atiyah-Singer index formula holds true for those objects and, as an example, we will compute the Euler characteristic of the connection quasicomplex. In addition to this we introduce geometric quasiendomorphisms and prove a generalisation of the Lefschetz fixed point theorem of Atiyah and Bott.}, language = {en} } @phdthesis{Thieme2015, author = {Thieme, Christoph J.}, title = {Sequence and structure determinants of microRNA maturation and the elucidation of RNA transport in plants}, school = {Universit{\"a}t Potsdam}, pages = {137}, year = {2015}, language = {en} } @phdthesis{Bittermann2015, author = {Bittermann, Klaus}, title = {Semi-empirical sea-level modelling}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-93881}, school = {Universit{\"a}t Potsdam}, pages = {v, 88}, year = {2015}, abstract = {Semi-empirical sea-level models (SEMs) exploit physically motivated empirical relationships between global sea level and certain drivers, in the following global mean temperature. This model class evolved as a supplement to process-based models (Rahmstorf (2007)) which were unable to fully represent all relevant processes. They thus failed to capture past sea-level change (Rahmstorf et al. (2012)) and were thought likely to underestimate future sea-level rise. Semi-empirical models were found to be a fast and useful tool for exploring the uncertainties in future sea-level rise, consistently giving significantly higher projections than process-based models. In the following different aspects of semi-empirical sea-level modelling have been studied. Models were first validated using various data sets of global sea level and temperature. SEMs were then used on the glacier contribution to sea level, and to infer past global temperature from sea-level data via inverse modelling. Periods studied encompass the instrumental period, covered by tide gauges (starting 1700 CE (Common Era) in Amsterdam) and satellites (first launched in 1992 CE), the era from 1000 BCE (before CE) to present, and the full length of the Holocene (using proxy data). Accordingly different data, model formulations and implementations have been used. It could be shown in Bittermann et al. (2013) that SEMs correctly predict 20th century sea-level when calibrated with data until 1900 CE. SEMs also turned out to give better predictions than the Intergovernmental Panel on Climate Change (IPCC) 4th assessment report (AR4, IPCC (2007)) models, for the period from 1961-2003 CE. With the first multi-proxy reconstruction of global sea-level as input, estimate of the human-induced component of modern sea-level change and projections of future sea-level rise were calculated (Kopp et al. (2016)). It turned out with 90\% confidence that more than 40 \% of the observed 20th century sea-level rise is indeed anthropogenic. With the new semi-empirical and IPCC (2013) 5th assessment report (AR5) projections the gap between SEM and process-based model projections closes, giving higher credibility to both. Combining all scenarios, from strong mitigation to business as usual, a global sea-level rise of 28-131 cm relative to 2000 CE, is projected with 90\% confidence. The decision for a low carbon pathway could halve the expected global sea-level rise by 2100 CE. Present day temperature and thus sea level are driven by the globally acting greenhouse-gas forcing. Unlike that, the Milankovich forcing, acting on Holocene timescales, results mainly in a northern-hemisphere temperature change. Therefore a semi-empirical model can be driven with northernhemisphere temperatures, which makes it possible to model the main subcomponent of sea-level change over this period. It showed that an additional positive constant rate of the order of the estimated Antarctic sea-level contribution is then required to explain the sea-level evolution over the Holocene. Thus the global sea level, following the climatic optimum, can be interpreted as the sum of a temperature induced sea-level drop and a positive long-term contribution, likely an ongoing response to deglaciation coming from Antarctica.}, language = {en} } @phdthesis{Krishnamoorthy2015, author = {Krishnamoorthy, Praveen}, title = {Regulatory roles of Ptdlns(4,5)P2 in trafficking of the cellulose synthase complex and identification of distinct plasma membrane localisation patterns of Arabidopsis PiP5-kinases}, school = {Universit{\"a}t Potsdam}, pages = {133}, year = {2015}, language = {en} } @phdthesis{Weits2015, author = {Weits, Daniel}, title = {Regulation of the molecular response to low oxygen in plants}, school = {Universit{\"a}t Potsdam}, pages = {113}, year = {2015}, language = {en} } @phdthesis{Sklodowski2015, author = {Sklodowski, Kamil}, title = {Regulation of plant potassium channels}, school = {Universit{\"a}t Potsdam}, pages = {115}, year = {2015}, language = {en} } @phdthesis{Sarem2015, author = {Sarem, Zeinab}, title = {Regulation of IGF-1 bioactivity by dietary hormones, impact of glucagon and insulin-induced hypoglycemia}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82198}, school = {Universit{\"a}t Potsdam}, pages = {IX, 64, IV, XIII}, year = {2015}, abstract = {Der Zusammenhang zwischen Ern{\"a}hrung und der Entwicklung von chronischen Krankenheiten wie metabolischem Syndrom, Diabetes mellitus, Krebs und kardiovaskul{\"a}ren Erkrankungen wurde untersucht. Ver{\"a}nderungen der GH-IGF-1 Achse in Verbindung mit ern{\"a}hrungsbedingten Erkrankungen wurden fr{\"u}her beschrieben. Das Wechselspiel zwischen GH, gesamt IGF-1 und verschiedenen hemmenden und stimulierenden IGF-1 bindenden Proteinen (IGFBPs) bestimmt die IGF-1 Bioaktivit{\"a}t, die als die F{\"a}higkeit von IGF-1 die Phosphorylierung von seinem Rezeptor und folglich seinem Signalsweg zu induzieren, identifiziert ist. Deshalb reicht die Messung der IGF-1 Bioaktivit{\"a}t aus, um {\"A}nderungen des GH-IGF-1 Systems darzustellen. Studien deuten darauf hin, dass proteinreiche Di{\"a}t, gekennzeichnet durch erh{\"o}hte Glukagonsekretion, und Insulin-induzierte Hypoglyk{\"a}mie die Sterblichkeit erh{\"o}hen, und die Mechanismen sind unklar. Sowohl Glukagon als auch Insulin-induzierte Hypoglyk{\"a}mie stimulieren die GH Sekretion. Das Ziel der vorliegenden Studie war, die Wirkung von Glucagon und Insulin-induzierter Hypoglyk{\"a}mie auf die IGF-1 -Bioaktivit{\"a}t als m{\"o}gliche Mechanismen zu characterizieren. In einer doppelblinden, Placebo-kontrollierten Studie wurde Glukagon intramuskul{\"a}r 13 Patienten mit T1DM (6 M{\"a}nner / 7 Frauen; [ BMI ] : 24,8 ± 0,95 kg / m2) , 11 {\"u}bergewichtigen Teilnehmern (OP ; 5/6 ; 34,4 ± 1,7 kg / m2) und 13 gesunden schlanken Teilnehmern (LP ; 6/7 ; 21,7 ± 0,6 kg / m2) administriert. Zw{\"o}lf {\"u}bergewichtige Teilnehmer (OP ; 6/6 ; 34,4 ± 1,7 kg / m2) und 13 gesunde schlanke Teilnehmer (LP ; 6/7 ; 21,7 ± 0,6 kg / m2) f{\"u}hrten Insulintoleranztests in einer weiteren doppelblinden, Plazebo- kontrollierten Studie durch. {\"A}nderungen des GH, gesamt-IGF-1, der IGF-bindenden Proteinen ( IGFBPs ) und der IGF-1-Bioaktivit{\"a}t wurden durch das zellbasierte KIRA-Verfahren gemessen. Außerdem wurde die Wechselwirkung zwischen den metabolischen Hormonen (Glucagon und Insulin) und GH-IGF-1-System auf der Transkriptionsebene mit prim{\"a}ren Maus-Hepatozyten untersucht. In dieser Arbeit verringerte Glukagon die IGF-1-Bioaktivit{\"a}t bei den Menschen unabh{\"a}ngig von k{\"o}rpereigenen Insulinspiegeln, h{\"o}chstwahrscheinlich durch Modulation des IGFBP-1 und -2. Die Glukagon-induzierte Reduktion der IGF-1-Bioaktivit{\"a}t stellt einen neuen Mechanismus der Wirkung von Glucagon auf die GH-Sekretion dar und kann als m{\"o}gliche Erkl{\"a}rung f{\"u}r die negativen Auswirkungen der proteinreichen Di{\"a}t im Zusammenhang auf das erh{\"o}hte kardiovaskul{\"a}re Risiko und die Mortalit{\"a}t vorgeschlagen werden. Zus{\"a}tzlich wurde die Insulin-induzierten Hypoglyk{\"a}mie eine Abnahme der IGF-1-Bioaktivit{\"a}t durch Hochregulierung von IGFBP-2 zugeordnet. Diese Ergebnisse k{\"o}nnen auf m{\"o}gliche und wenig erforschte Mechanismen zur Erl{\"a}uterung der starken Assoziation zwischen Hypoglyk{\"a}mie und erh{\"o}hter kardiovaskul{\"a}rer Mortalit{\"a}t bei diabetischen Patienten beziehen.}, language = {en} } @phdthesis{Bora2015, author = {Bora, Sanjay Singh}, title = {Regionally adaptable ground-motion Prediction Equations (GMPEs) for seismic hazard analysis}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-88806}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 138}, year = {2015}, abstract = {Adjustment of empirically derived ground motion prediction equations (GMPEs), from a data- rich region/site where they have been derived to a data-poor region/site, is one of the major challenges associated with the current practice of seismic hazard analysis. Due to the fre- quent use in engineering design practices the GMPEs are often derived for response spectral ordinates (e.g., spectral acceleration) of a single degree of freedom (SDOF) oscillator. The functional forms of such GMPEs are based upon the concepts borrowed from the Fourier spectral representation of ground motion. This assumption regarding the validity of Fourier spectral concepts in the response spectral domain can lead to consequences which cannot be explained physically. In this thesis, firstly results from an investigation that explores the relationship between Fourier and response spectra, and implications of this relationship on the adjustment issues of GMPEs, are presented. The relationship between the Fourier and response spectra is explored by using random vibration theory (RVT), a framework that has been extensively used in earthquake engineering, for instance within the stochastic simulation framework and in the site response analysis. For a 5\% damped SDOF oscillator the RVT perspective of response spectra reveals that no one-to-one correspondence exists between Fourier and response spectral ordinates except in a limited range (i.e., below the peak of the response spectra) of oscillator frequencies. The high oscillator frequency response spectral ordinates are dominated by the contributions from the Fourier spectral ordinates that correspond to the frequencies well below a selected oscillator frequency. The peak ground acceleration (PGA) is found to be related with the integral over the entire Fourier spectrum of ground motion which is in contrast to the popularly held perception that PGA is a high-frequency phenomenon of ground motion. This thesis presents a new perspective for developing a response spectral GMPE that takes the relationship between Fourier and response spectra into account. Essentially, this frame- work involves a two-step method for deriving a response spectral GMPE: in the first step two empirical models for the FAS and for a predetermined estimate of duration of ground motion are derived, in the next step, predictions from the two models are combined within the same RVT framework to obtain the response spectral ordinates. In addition to that, a stochastic model based scheme for extrapolating the individual acceleration spectra beyond the useable frequency limits is also presented. To that end, recorded acceleration traces were inverted to obtain the stochastic model parameters that allow making consistent extrapola- tion in individual (acceleration) Fourier spectra. Moreover an empirical model, for a dura- tion measure that is consistent within the RVT framework, is derived. As a next step, an oscillator-frequency-dependent empirical duration model is derived that allows obtaining the most reliable estimates of response spectral ordinates. The framework of deriving the response spectral GMPE presented herein becomes a self-adjusting model with the inclusion of stress parameter (∆σ) and kappa (κ0) as the predictor variables in the two empirical models. The entire analysis of developing the response spectral GMPE is performed on recently compiled RESORCE-2012 database that contains recordings made from Europe, the Mediterranean and the Middle East. The presented GMPE for response spectral ordinates should be considered valid in the magnitude range of 4 ≤ MW ≤ 7.6 at distances ≤ 200 km.}, language = {en} } @phdthesis{Kormann2015, author = {Kormann, Christoph Martin}, title = {Regional climate change effects on hydroclimatic conditions in the Alpine region}, school = {Universit{\"a}t Potsdam}, pages = {129}, year = {2015}, language = {en} } @phdthesis{Neugebauer2015, author = {Neugebauer, Ina}, title = {Reconstructing climate from the Dead Sea sediment record using high-resolution micro-facies analyses}, series = {Dissertation}, journal = {Dissertation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85266}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 97, XXIII}, year = {2015}, abstract = {The sedimentary record of the Dead Sea is a key archive for reconstructing climate in the eastern Mediterranean region, as it stores the environmental and tectonic history of the Levant for the entire Quaternary. Moreover, the lake is located at the boundary between Mediterranean sub-humid to semi-arid and Saharo-Arabian hyper-arid climates, so that even small shifts in atmospheric circulation are sensitively recorded in the sediments. This DFG-funded doctoral project was carried out within the ICDP Dead Sea Deep Drilling Project (DSDDP) that intended to gain the first long, continuous and high-resolution sediment core from the deep Dead Sea basin. The drilling campaign was performed in winter 2010-11 and more than 700 m of sediments were recovered. The main aim of this thesis was (1) to establish the lithostratigraphic framework for the ~455 m long sediment core from the deep Dead Sea basin and (2) to apply high-resolution micro-facies analyses for reconstructing and better understanding climate variability from the Dead Sea sediments. Addressing the first aim, the sedimentary facies of the ~455 m long deep-basin core 5017-1 were described in great detail and characterised through continuous overview-XRF element scanning and magnetic susceptibility measurements. Three facies groups were classified: (1) the marl facies group, (2) the halite facies group and (3) a group involving different expressions of massive, graded and slumped deposits including coarse clastic detritus. Core 5017-1 encompasses a succession of four main lithological units. Based on first radiocarbon and U-Th ages and correlation of these units to on-shore stratigraphic sections, the record comprises the last ca 220 ka, i.e. the upper part of the Amora Formation (parts of or entire penultimate interglacial and glacial), the last interglacial Samra Fm. (~135-75 ka), the last glacial Lisan Fm. (~75-14 ka) and the Holocene Ze'elim Formation. A major advancement of this record is that, for the first time, also transitional intervals were recovered that are missing in the exposed formations and that can now be studied in great detail. Micro-facies analyses involve a combination of high-resolution microscopic thin section analysis and µXRF element scanning supported by magnetic susceptibility measurements. This approach allows identifying and characterising micro-facies types, detecting event layers and reconstructing past climate variability with up to seasonal resolution, given that the analysed sediments are annually laminated. Within this thesis, micro-facies analyses, supported by further sedimentological and geochemical analyses (grain size, X-ray diffraction, total organic carbon and calcium carbonate contents) and palynology, were applied for two time intervals: (1) The early last glacial period ~117-75 ka was investigated focusing on millennial-scale hydroclimatic variations and lake level changes recorded in the sediments. Thereby, distinguishing six different micro-facies types with distinct geochemical and sedimentological characteristics allowed estimating relative lake level and water balance changes of the lake. Comparison of the results to other records in the Mediterranean region suggests a close link of the hydroclimate in the Levant to North Atlantic and Mediterranean climates during the time of the build-up of Northern hemisphere ice sheets during the early last glacial period. (2) A mostly annually laminated late Holocene section (~3700-1700 cal yr BP) was analysed in unprecedented detail through a multi-proxy, inter-site correlation approach of a shallow-water core (DSEn) and its deep-basin counterpart (5017-1). Within this study, a ca 1500 years comprising time series of erosion and dust deposition events was established and anchored to the absolute time-scale through 14C dating and age modelling. A particular focus of this study was the characterisation of two dry periods, from ~3500 to 3300 and from ~3000 to 2400 cal yr BP, respectively. Thereby, a major outcome was the coincidence of the latter dry period with a period of moist and cold climate in Europe related to a Grand Solar Minimum around 2800 cal yr BP and an increase in flood events despite overall dry conditions in the Dead Sea region during that time. These contrasting climate signatures in Europe and at the Dead Sea were likely linked through complex teleconnections of atmospheric circulation, causing a change in synoptic weather patterns in the eastern Mediterranean. In summary, within this doctorate the lithostratigraphic framework of a unique long sediment core from the deep Dead Sea basin is established, which serves as a base for any further high-resolution investigations on this core. It is demonstrated in two case studies that micro-facies analyses are an invaluable tool to understand the depositional processes in the Dead Sea and to decipher past climate variability in the Levant on millennial to seasonal time-scales. Hence, this work adds important knowledge helping to establish the deep Dead Sea record as a key climate archive of supra-regional significance.}, language = {en} } @phdthesis{Conforti2015, author = {Conforti, Giovanni}, title = {Reciprocal classes of continuous time Markov Chains}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82255}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 183}, year = {2015}, abstract = {In this thesis we study reciprocal classes of Markov chains. Given a continuous time Markov chain on a countable state space, acting as reference dynamics, the associated reciprocal class is the set of all probability measures on path space that can be written as a mixture of its bridges. These processes possess a conditional independence property that generalizes the Markov property, and evolved from an idea of Schr{\"o}dinger, who wanted to obtain a probabilistic interpretation of quantum mechanics. Associated to a reciprocal class is a set of reciprocal characteristics, which are space-time functions that determine the reciprocal class. We compute explicitly these characteristics, and divide them into two main families: arc characteristics and cycle characteristics. As a byproduct, we obtain an explicit criterion to check when two different Markov chains share their bridges. Starting from the characteristics we offer two different descriptions of the reciprocal class, including its non-Markov probabilities. The first one is based on a pathwise approach and the second one on short time asymptotic. With the first approach one produces a family of functional equations whose only solutions are precisely the elements of the reciprocal class. These equations are integration by parts on path space associated with derivative operators which perturb the paths by mean of the addition of random loops. Several geometrical tools are employed to construct such formulas. The problem of obtaining sharp characterizations is also considered, showing some interesting connections with discrete geometry. Examples of such formulas are given in the framework of counting processes and random walks on Abelian groups, where the set of loops has a group structure. In addition to this global description, we propose a second approach by looking at the short time behavior of a reciprocal process. In the same way as the Markov property and short time expansions of transition probabilities characterize Markov chains, we show that a reciprocal class is characterized by imposing the reciprocal property and two families of short time expansions for the bridges. Such local approach is suitable to study reciprocal processes on general countable graphs. As application of our characterization, we considered several interesting graphs, such as lattices, planar graphs, the complete graph, and the hypercube. Finally, we obtain some first results about concentration of measure implied by lower bounds on the reciprocal characteristics.}, language = {en} } @phdthesis{Prill2015, author = {Prill, Sebastian}, title = {Real-Time in vitro toxicity monotoring in a microfluidic bioreactor for drug and chemical safety assessment}, pages = {119}, year = {2015}, language = {en} } @phdthesis{Sander2015, author = {Sander, Andreas Alexander Christoph}, title = {Radiatively driven winds of hot stars}, school = {Universit{\"a}t Potsdam}, pages = {153}, year = {2015}, language = {en} } @phdthesis{Abon2015, author = {Abon, Catherine Cristobal}, title = {Radar-based rainfall retrieval for flood forecasting in a meso-scale catchment}, school = {Universit{\"a}t Potsdam}, pages = {93 S.}, year = {2015}, language = {en} } @phdthesis{Sommerfeld2015, author = {Sommerfeld, Anja}, title = {Quantification of internal variability of the arctic summer atmosphere based on HIRHAM5 ensemble simulations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85347}, school = {Universit{\"a}t Potsdam}, pages = {VII, 110, vi}, year = {2015}, abstract = {The non-linear behaviour of the atmospheric dynamics is not well understood and makes the evaluation and usage of regional climate models (RCMs) difficult. Due to these non-linearities, chaos and internal variability (IV) within the RCMs are induced, leading to a sensitivity of RCMs to their initial conditions (IC). The IV is the ability of RCMs to realise different solutions of simulations that differ in their IC, but have the same lower and lateral boundary conditions (LBC), hence can be defined as the across-member spread between the ensemble members. For the investigation of the IV and the dynamical and diabatic contributions generating the IV four ensembles of RCM simulations are performed with the atmospheric regional model HIRHAM5. The integration area is the Arctic and each ensemble consists of 20 members. The ensembles cover the time period from July to September for the years 2006, 2007, 2009 and 2012. The ensemble members have the same LBC and differ in their IC only. The different IC are arranged by an initialisation time that shifts successively by six hours. Within each ensemble the first simulation starts on 1st July at 00 UTC and the last simulation starts on 5th July at 18 UTC and each simulation runs until 30th September. The analysed time period ranges from 6th July to 30th September, the time period that is covered by all ensemble members. The model runs without any nudging to allow a free development of each simulation to get the full internal variability within the HIRHAM5. As a measure of the model generated IV, the across-member standard deviation and the across-member variance is used and the dynamical and diabatic processes influencing the IV are estimated by applying a diagnostic budget study for the IV tendency of the potential temperature developed by Nikiema and Laprise [2010] and Nikiema and Laprise [2011]. The diagnostic budget study is based on the first law of thermodynamics for potential temperature and the mass-continuity equation. The resulting budget equation reveals seven contributions to the potential temperature IV tendency. As a first study, this work analyses the IV within the HIRHAM5. Therefore, atmospheric circulation parameters and the potential temperature for all four ensemble years are investigated. Similar to previous studies, the IV fluctuates strongly in time. Further, due to the fact that all ensemble members are forced with the same LBC, the IV depends on the vertical level within the troposphere, with high values in the lower troposphere and at 500 hPa and low values in the upper troposphere and at the surface. By the same reason, the spatial distribution shows low values of IV at the boundaries of the model domain. The diagnostic budget study for the IV tendency of potential temperature reveals that the seven contributions fluctuate in time like the IV. However, the individual terms reach different absolute magnitudes. The budget study identifies the horizontal and vertical 'baroclinic' terms as the main contributors to the IV tendency, with the horizontal 'baroclinic' term producing and the vertical 'baroclinic' term reducing the IV. The other terms fluctuate around zero, because they are small in general or are balanced due to the domain average. The comparison of the results obtained for the four different ensembles (summers 2006, 2007, 2009 and 2012) reveals that on average the findings for each ensemble are quite similar concerning the magnitude and the general pattern of IV and its contributions. However, near the surface a weaker IV is produced with decreasing sea ice extent. This is caused by a smaller impact of the horizontal 'baroclinic' term over some regions and by the changing diabatic processes, particularly a more intense reducing tendency of the IV due to condensative heating. However, it has to be emphasised that the behaviour of the IV and its dynamical and diabatic contributions are influenced mainly by complex atmospheric feedbacks and large-scale processes and not by the sea ice distribution. Additionally, a comparison with a second RCM covering the Arctic and using the same LBCs and IC is performed. For both models very similar results concerning the IV and its dynamical and diabatic contributions are found. Hence, this investigation leads to the conclusion that the IV is a natural phenomenon and is independent from the applied RCM.}, language = {en} } @phdthesis{Kieling2015, author = {Kieling, Katrin}, title = {Quantification of ground motions by broadband simulations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85989}, school = {Universit{\"a}t Potsdam}, pages = {XIV, 118}, year = {2015}, abstract = {In many procedures of seismic risk mitigation, ground motion simulations are needed to test systems or improve their effectiveness. For example they may be used to estimate the level of ground shaking caused by future earthquakes. Good physical models for ground motion simulation are also thought to be important for hazard assessment, as they could close gaps in the existing datasets. Since the observed ground motion in nature shows a certain variability, part of which cannot be explained by macroscopic parameters such as magnitude or position of an earthquake, it would be desirable that a good physical model is not only able to produce one single seismogram, but also to reveal this natural variability. In this thesis, I develop a method to model realistic ground motions in a way that is computationally simple to handle, permitting multiple scenario simulations. I focus on two aspects of ground motion modelling. First, I use deterministic wave propagation for the whole frequency range - from static deformation to approximately 10 Hz - but account for source variability by implementing self-similar slip distributions and rough fault interfaces. Second, I scale the source spectrum so that the modelled waveforms represent the correct radiated seismic energy. With this scaling I verify whether the energy magnitude is suitable as an explanatory variable, which characterises the amount of energy radiated at high frequencies - the advantage of the energy magnitude being that it can be deduced from observations, even in real-time. Applications of the developed method for the 2008 Wenchuan (China) earthquake, the 2003 Tokachi-Oki (Japan) earthquake and the 1994 Northridge (California, USA) earthquake show that the fine source discretisations combined with the small scale source variability ensure that high frequencies are satisfactorily introduced, justifying the deterministic wave propagation approach even at high frequencies. I demonstrate that the energy magnitude can be used to calibrate the high-frequency content in ground motion simulations. Because deterministic wave propagation is applied to the whole frequency range, the simulation method permits the quantification of the variability in ground motion due to parametric uncertainties in the source description. A large number of scenario simulations for an M=6 earthquake show that the roughness of the source as well as the distribution of fault dislocations have a minor effect on the simulated variability by diminishing directivity effects, while hypocenter location and rupture velocity more strongly influence the variability. The uncertainty in energy magnitude, however, leads to the largest differences of ground motion amplitude between different events, resulting in a variability which is larger than the one observed. For the presented approach, this dissertation shows (i) the verification of the computational correctness of the code, (ii) the ability to reproduce observed ground motions and (iii) the validation of the simulated ground motion variability. Those three steps are essential to evaluate the suitability of the method for means of seismic risk mitigation.}, language = {en} } @phdthesis{Rach2015, author = {Rach, Oliver}, title = {Qualitative and quantitative estimations of hydrological changes in western Europe during abrupt climate shifts using lipid biomarker derived stable hydrogen isotope records}, school = {Universit{\"a}t Potsdam}, pages = {217}, year = {2015}, language = {en} } @phdthesis{Sborikas2015, author = {Sborikas, Martynas}, title = {Preparation and characterization of acoustic electret and electromechanical properties of polypropylene ferroelectrets}, pages = {129}, year = {2015}, language = {en} } @phdthesis{Ayguel2015, author = {Ayg{\"u}l, Mesut}, title = {Pre-collisional accretion and exhumation along the southern Laurasian active margin, Central Pontides, Turkey}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-416769}, school = {Universit{\"a}t Potsdam}, pages = {xxxiv, 206}, year = {2015}, abstract = {The Central Pontides is an accretionary-type orogenic area within the Alpine-Himalayan orogenic belt characterized by pre-collisional tectonic continental growth. The region comprises Mesozoic subduction-accretionary complexes and an accreted intra-oceanic arc that are sandwiched between the Laurasian active continental margin and Gondwana-derived the K{\i}r{\c{s}}ehir Block. The subduction-accretion complexes mainly consist of an Albian-Turonian accretionary wedge representing the Laurasian active continental margin. To the north, the wedge consists of slate/phyllite and metasandstone intercalation with recrystallized limestone, Na-amphibole-bearing metabasite (PT= 7-12 kbar and 400 ± 70 ºC) and tectonic slices of serpentinite representing accreted distal part of a large Lower Cretaceous submarine turbidite fan deposited on the Laurasian active continental margin that was subsequently accreted and metamorphosed. Raman spectra of carbonaceous material (RSCM) of the metapelitic rocks revealed that the metaflysch sequence consists of metamorphic packets with distinct peak metamorphic temperatures. The majority of the metapelites are low-temperature (ca. 330 °C) slates characterized by lack of differentiation of the graphite (G) and D2 defect bands. They possibly represent offscraped distal turbidites along the toe of the Albian accretionary wedge. The rest are phyllites that are characterized by slightly pronounced G band with D2 defect band occurring on its shoulder. Peak metamorphic temperatures of these phyllites are constrained to 370-385 °C. The phyllites are associated with a strip of incipient blueschist facies metabasites which are found as slivers within the offscraped distal turbidites. They possibly represent underplated continental metasediments together with oceanic crustal basalt along the basal d{\´e}collement. Tectonic emplacement of the underplated rocks into the offscraped distal turbidites was possibly achieved by out-of-sequence thrusting causing tectonic thickening and uplift of the wedge. 40Ar/39Ar phengite ages from the phyllites are ca. 100 Ma, indicating Albian subduction and regional HP metamorphism. The accreted continental metasediments are underlain by HP/LT metamorphic rocks of oceanic origin along an extensional shear zone. The oceanic metamorphic sequence mainly comprises tectonically thickened deep-seated eclogite to blueschist facies metabasites and micaschists. In the studied area, metabasites are epidote-blueschists locally with garnet (PT= 17 ± 1 kbar and 500 ± 40 °C). Lawsonite-blueschists are exposed as blocks along the extensional shear zone (PT= 14 ± 2 kbar and 370-440 °C). They are possibly associated with low shear stress regime of the initial stage of convergence. Close to the shear zone, the footwall micaschists consist of quartz, phengite, paragonite, chlorite, rutile with syn-kinematic albite porphyroblast formed by pervasive shearing during exhumation. These types of micaschists are tourmaline-bearing and their retrograde nature suggests high-fluid flux along shear zones. Peak metamorphic mineral assemblages are partly preserved in the chloritoid-micaschist farther away from the shear zone representing the zero strain domains during exhumation. Three peak metamorphic assemblages are identified and their PT conditions are constrained by pseudosections produced by Theriak-Domino and by Raman spectra of carbonaceous material: 1) garnet-chloritoid-glaucophane with lawsonite pseudomorphs (P= 17.5 ± 1 kbar, T: 390-450 °C) 2) chloritoid with glaucophane pseudomorphs (P= 16-18 kbar, T: 475 ± 40 °C) and 3) relatively high-Mg chloritoid (17\%) with jadeite pseudomorphs (P= 22-25 kbar; T: 440 ± 30 °C) in addition to phengite, paragonite, quartz, chlorite, rutile and apatite. The last mineral assemblage is interpreted as transformation of the chloritoid + glaucophane assemblage to chloritoid + jadeite paragenesis with increasing pressure. Absence of tourmaline suggests that the chloritoid-micaschist did not interact with B-rich fluids during zero strain exhumation. 40Ar/39Ar phengite age of a pervasively sheared footwall micaschist is constrained to 100.6 ± 1.3 Ma and that of a chloritoid-micaschist is constrained to 91.8 ± 1.8 Ma suggesting exhumation during on-going subduction with a southward younging of the basal accretion and the regional metamorphism. To the south, accretionary wedge consists of blueschist and greenschist facies metabasite, marble and volcanogenic metasediment intercalation. 40Ar/39Ar phengite dating reveals that this part of the wedge is of Middle Jurassic age partly overprinted during the Albian. Emplacement of the Middle Jurassic subduction-accretion complexes is possibly associated with obliquity of the Albian convergence. Peak metamorphic assemblages and PT estimates of the deep-seated oceanic metamorphic sequence suggest tectonic stacking within wedge with different depths of burial. Coupling and exhumation of the distinct metamorphic slices are controlled by decompression of the wedge possibly along a retreating slab. Structurally, decompression of the wedge is evident by an extensional shear zone and the footwall micaschists with syn-kinematic albite porphyroblasts. Post-kinematic garnets with increasing grossular content and pseudomorphing minerals within the chloritoid-micaschists also support decompression model without an extra heating. Thickening of subduction-accretionary complexes is attributed to i) significant amount of clastic sediment supply from the overriding continental domain and ii) deep level basal underplating by propagation of the d{\´e}collement along a retreating slab. Underplating by basal d{\´e}collement propagation and subsequent exhumation of the deep-seated subduction-accretion complexes are connected and controlled by slab rollback creating a necessary space for progressive basal accretion along the plate interface and extension of the wedge above for exhumation of the tectonically thickened metamorphic sequences. This might be the most common mechanism of the tectonic thickening and subsequent exhumation of deep-seated HP/LT subduction-accretion complexes. To the south, the Albian-Turonian accretionary wedge structurally overlies a low-grade volcanic arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed north of the İzmir-Ankara-Erzincan suture (İAES), separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metavolcanic rocks are stratigraphically overlain by recrystallized micritic limestone with rare volcanogenic metaclastic rocks. Two groups can be identified based on trace and rare earth element characteristics. The first group consists of basaltic andesite/andesite (BA1) and rhyolite with abundant cognate gabbroic xenoliths. It is characterized by relative enrichment of LREE with respect to HREE. The rocks are enriched in fluid mobile LILE, and strongly depleted in Ti and P reflecting fractionation of Fe-Ti oxides and apatite, which are found in the mafic cognate xenoliths. Abundant cognate gabbroic xenoliths and identical trace and rare earth elements compositions suggest that rhyolites and basaltic andesites/andesites (BA1) are cogenetic and felsic rocks were derived from a common mafic parental magma by fractional crystallization and accumulation processes. The second group consists only of basaltic andesites (BA2) with flat REE pattern resembling island arc tholeiites. Although enriched in LILE, this group is not depleted in Ti or P. Geochemistry of the metavolcanic rocks indicates supra-subduction volcanism evidenced by depletion of HFSE and enrichment of LILE. The arc sequence is sandwiched between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic m{\´e}lange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the K{\"o}sdağ Arc was intra-oceanic. This is in accordance with basaltic andesites (BA2) with island arc tholeiite REE pattern. Zircons from two metarhyolite samples give Late Cretaceous (93.8 ± 1.9 and 94.4 ± 1.9 Ma) U/Pb ages. Low-grade regional metamorphism of the intra-oceanic arc sequence is constrained 69.9 ± 0.4 Ma by 40Ar/39Ar dating on metamorphic muscovite from a metarhyolite indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. The youngest 40Ar/39Ar phengite age from the overlying subduction-accretion complexes is 92 Ma confirming southward younging of an accretionary-type orogenic belt. Hence, the arc sequence represents an intra-oceanic paleo-arc that formed above the sinking Tethyan slab and finally accreted to Laurasian active continental margin. Abrupt non-collisional termination of arc volcanism was possibly associated with southward migration of the arc volcanism similar to the Izu-Bonin-Mariana arc system. The intra-oceanic K{\"o}sdağ Arc is coeval with the obducted supra-subduction ophiolites in NW Turkey suggesting that it represents part of the presumed but missing incipient intra-oceanic arc associated with the generation of the regional supra-subduction ophiolites. Remnants of a Late Cretaceous intra-oceanic paleo-arc and supra-subduction ophiolites can be traced eastward within the Alp-Himalayan orogenic belt. This reveals that Late Cretaceous intra-oceanic subduction occurred as connected event above the sinking Tethyan slab. It resulted as arc accretion to Laurasian active margin and supra-subduction ophiolite obduction on Gondwana-derived terranes.}, language = {en} } @phdthesis{Adamla2015, author = {Adamla, Frauke}, title = {Polyglutamine- and aging-dependent aberrancies in transcription and translation}, school = {Universit{\"a}t Potsdam}, pages = {109}, year = {2015}, language = {en} } @phdthesis{Mitzscherling2015, author = {Mitzscherling, Steffen}, title = {Polyelectrolyte multilayers for plasmonics and picosecond ultrasonics}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-80833}, school = {Universit{\"a}t Potsdam}, pages = {93}, year = {2015}, abstract = {This thesis investigates the application of polyelectrolyte multilayers in plasmonics and picosecond acoustics. The observed samples were fabricated by the spin-assisted layer-by-layer deposition technique that allowed a precise tuning of layer thickness in the range of few nanometers. The first field of interest deals with the interaction of light-induced localized surface plasmons (LSP) of rod-shaped gold nanoparticles with the particles' environment. The environment consists of an air phase and a phase of polyelectrolytes, whose ratio affects the spectral position of the LSP resonance. Measured UV-VIS spectra showed the shift of the LSP absorption peak as a function of the cover layer thickness of the particles. The data are modeled using an average dielectric function instead of the dielectric functions of air and polyelectrolytes. In addition using a measured dielectric function of the gold nanoparticles, the position of the LSP absorption peak could be simulated with good agreement to the data. The analytic model helps to understand the optical properties of metal nanoparticles in an inhomogeneous environment. The second part of this work discusses the applicability of PAzo/PAH and dye-doped PSS/PAH polyelectrolyte multilayers as transducers to generate hypersound pulses. The generated strain pulses were detected by time-domain Brillouin scattering (TDBS) using a pump-probe laser setup. Transducer layers made of polyelectrolytes were compared qualitatively to common aluminum transducers in terms of measured TDBS signal amplitude, degradation due to laser excitation, and sample preparation. The measurements proved that fast and easy prepared polyelectrolyte transducers provided stronger TDBS signals than the aluminum transducer. AFM topography measurements showed a degradation of the polyelectrolyte structures, especially for the PAzo/PAH sample. To quantify the induced strain, optical barriers were introduced to separate the transducer material from the medium of the hypersound propagation. Difficulties in the sample preparation prohibited a reliable quantification. But the experiments showed that a coating with transparent polyelectrolytes increases the efficiency of aluminum transducers and modifies the excited phonon distribution. The adoption of polyelectrolytes to the scientific field of picosecond acoustics enables a cheap and fast fabrication of transducer layers on most surfaces. In contrast to aluminum layers the polyelectrolytes are transparent over a wide spectral range. Thus, the strain modulation can be probed from surface and back.}, language = {en} } @phdthesis{Grygiel2015, author = {Grygiel, Konrad}, title = {Poly(ionic liquid) stabilizers and new synthetic approaches}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-80367}, school = {Universit{\"a}t Potsdam}, pages = {vii, 126}, year = {2015}, abstract = {The main focus of the present thesis was to investigate the stabilization ability of poly(ionic liquid)s (PILs) in several examples as well as develop novel chemical structures and synthetic routes of PILs. The performed research can be specifically divided into three parts that include synthesis and application of hybrid material composed of PIL and cellulose nanofibers (CNFs), thiazolium-containing PILs, and main-chain imidazolium-type PILs. In the first chapter, a vinylimidazolium-type IL was polymerized in water in the presence of CNFs resulting in the in situ electrostatic grafting of polymeric chains onto the surface of CNFs. The synthesized hybrid material merged advantages of its two components, that is, superior mechanical strength of CNFs and anion dependent solution properties of PILs. In contrast to unmodified CNFs, the hybrid could be stabilized and processed in organic solvents enabling its application as reinforcing agent for porous polyelectrolyte membranes. In the second part, PILs and ionic polymers containing two types of thiazolium repeating units were synthesized. Such polymers displayed counterion dependent thermal stability and solubility in organic solvents of various dielectric constants. This new class of PILs was tested as stabilizers and phase transfer agents for carbon nanotubes in aqueous and organic media, and as binder materials to disperse electroactive powders and carbon additives in solid electrode in lithium-ion batteries. The incorporation of S and N atoms into the polymeric structures make such PILs also potential precursors for S, N - co-doped carbons. In the last chapter, reactants originating from biomass were successfully harnessed to synthesize main-chain imidazolium-type PILs. An imidazolium-type diester IL obtained via a modified Debus-Radziszewski reaction underwent transesterification with diol in a polycondensation reaction. This yielded a polyester-type PIL which CO2 sorption properties were investigated. In the next step, the modified Debus-Radziszewski reaction was further applied to synthesize main-chain PILs according to a convenient, one-step protocol, using water as a green solvent and simple organic molecules as reagents. Depending on the structure of the employed diamine, the synthesized PILs after anion exchange showed superior thermal stability with unusually high carbonization yields. Overall, the outcome of these studies will actively contribute to the current research on PILs by introducing novel PIL chemical structures, improved synthetic routes, and new examples of stabilized materials. The synthesis of main-chain imidazolium-type PILs by a modified Debus-Radziszewski reaction is of a special interest for the future work on porous ionic liquid networks as well as colloidal PIL nanoparticles.}, language = {en} } @phdthesis{Tassler2015, author = {Taßler, Stephanie}, title = {Physical-Chemical Investigation of newly-synthesised Lysine-Based Amino-Functionalised Lipids for gene transfection in 2D and 3D model systems}, school = {Universit{\"a}t Potsdam}, pages = {142}, year = {2015}, language = {en} } @phdthesis{Golle2015, author = {Golle, Kathleen}, title = {Physical fitness in school-aged children}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85949}, school = {Universit{\"a}t Potsdam}, pages = {xi, 147, xii}, year = {2015}, abstract = {Physical fitness is an important marker of health that enables people to carry out activities of daily living with vigour and alertness but without undue fatigue and with sufficient reserve to enjoy active leisure pursuits and to meet unforeseen emergencies. Especially, due to scientific findings that the onset of civilization diseases (e.g., obesity, cardiovascular disease) begins in childhood and that physical fitness tracks (at least) into young adulthood, the regular monitoring and promotion of physical fitness in children is risen up to a public health issue. In relation to the evaluation of a child's physical fitness over time (i.e., development) the use of longitudinally-based percentile values is of particular interest due to their underlined dedication of true physical fitness development within subjects (i.e., individual changes in timing and tempo of growth and maturation). Besides its genetic determination (e.g., sex, body height), physical fitness is influenced by factors that refer to children's environment and behaviour. For instance, disparities in physical fitness according to children's living area are frequently reported concerning the fact that living in rural areas as compared to urban areas seems to be more favourable for children's physical fitness. In addition, cross-sectional studies found higher fitness values in children participating in sports clubs as compared to non-participants. However, up to date, the observed associations between both (i.e., living area and sports club participating) and children's physical fitness are unresolved concerning a long-term effect. In addition, social inequality as determined by the socioeconomic status (SES) extends through many areas of children's life. While evidence indicates that the SES is inversely related to various indices of child's daily life and behaviour like educational success, nutritional habits, and sedentary- and physical activity behaviour, a potential relationship between child's physical fitness and the SES is hardly investigated and indicated inconsistent results. The present thesis addressed three objectives: (1) to generate physical fitness percentiles for 9- to 12- year-old boys and girls using a longitudinal approach and to analyse the age- and sex-specific development of physical fitness, (2) to investigate the long-term effect of living area and sports club participation on physical fitness in third- to sixth-grade primary school students, and (3) to examine associations between the SES and physical fitness in a large and representative (i.e., for a German federal state) sample of third grade primary school students. Methods (i/ii) Healthy third graders were followed over four consecutive years (up to grade 6), including annually assessment of physical fitness and parental questionnaire (i.e., status of sports club participation and living area). Six tests were conducted to estimate various components of physical fitness: speed (50-m sprint test), upper body muscular power (1-kg ball push test), lower body muscular power (triple hop test), flexibility (stand-and-reach test), agility (star agility run test), and cardiorespiratory fitness (CRF) (9-min run test). (iii) Within a cross-sectional study (i.e., third objective), physical fitness of third graders was assessed by six physical fitness tests including: speed (20-m sprint test), upper body muscular power (1-kg ball push test), lower body muscular power (standing long jump [SLJ] test), flexibility (stand-and-reach test), agility (star agility run test), and CRF (6-min run test). By means of questionnaire, students reported their status of organized sports participation (OSP). Results (i) With respect to percentiles of physical fitness development, test performances increased in boys and girls from age 9 to 12, except for males' flexibility (i.e., stable performance over time). Girls revealed significantly better performance in flexibility, whereas boys scored significantly higher in the remaining physical fitness tests. In girls as compared to boys, physical fitness development was slightly faster for upper body muscular power but substantially faster for flexibility. Generated physical fitness percentile curves indicated a timed and capacity-specific physical fitness development (curvilinear) for upper body muscular power, agility, and CRF. (ii) Concerning the effect of living area and sports club participation on physical fitness development, children living in urban areas showed a significantly faster performance development in physical fitness components of upper and lower body muscular power as compared to peers from rural areas. The same direction was noted as a trend in CRF. Additionally, children that regularly participated in a sports club, when compared to those that not continuously participated in a sports club demonstrated a significantly faster performance development in lower body muscular power. A trend of faster performance development in sports club participants occurred in CRF too. (iii) Regarding the association of SES with physical fitness, the percentage of third graders that achieved a high physical fitness level in lower body muscular power and CRF was significantly higher in students attending schools in communities with high SES as compared to middle and low SES, irrespective of sex. Similar, students from the high SES-group performed significantly better in lower body muscular power and CRF than students from the middle and/or the low SES-group. Conclusion (i) The generated percentile values provide an objective tool to estimate childrenʼs physical fitness within the frame of physical education (e.g., age- and sex-specific grading of motor performance) and further to detect children with specific fitness characteristics (low fit or high fit) that may be indicative for the necessity of preventive health promotion or long term athlete development. (ii) It is essential to consider variables of different domains (e.g., environment and behavior) in order to improve knowledge of potential factors which influence physical fitness during childhood. In this regard, the present thesis provide a first input to clarify the causality of living area and sports club participation on physical fitness development in school-aged children. Living in urban areas as well as a regular participation in sports clubs positively affected children´s physical fitness development (i.e., muscular power and CRF). Herein, sports club participation seems to be a key factor within the relationship between living area and physical fitness. (iii) The findings of the present thesis imply that attending schools in communities with high SES refers to better performance in specific physical fitness test items (i.e., muscular power, CRF) in third graders. Extra-curricular physical education classes may represent an important equalizing factor for physical activity opportunities in children of different SES backgrounds. In regard to strong evidence of a positive relationship between physical fitness - in particular muscular fitness/ CRF - and health, more emphasis should be laid on establishing sports clubs and extra-curricular physical education classes as an easy and attractive means to promote fitness-, and hence health- enhancing daily physical activity for all children (i.e. public health approach).}, language = {en} } @phdthesis{Wieland2015, author = {Wieland, Volkmar}, title = {Particle-in-cell simulations of perpendicular supernova shock fronts}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-74532}, school = {Universit{\"a}t Potsdam}, pages = {v, 89}, year = {2015}, abstract = {The origin of cosmic rays was the subject of several studies for over a century. The investigations done within this dissertation are one small step to shed some more light on this mystery. Locating the sources of cosmic rays is not trivial due to the interstellar magnetic field. However, the Hillas criterion allows us to arrive at the conclusion that supernova remnants are our main suspect for the origin of galactic cosmic rays. The mechanism by which they are accelerating particles is found within the field of shock physics as diffusive shock acceleration. To allow particles to enter this process also known as Fermi acceleration pre-acceleration processes like shock surfing acceleration and shock drift acceleration are necessary. Investigating the processes happening in the plasma shocks of supernova remnants is possible by utilising a simplified model which can be simulated on a computer using Particle-in-Cell simulations. We developed a new and clean setup to simulate the formation of a double shock, i.e., consisting of a forward and a reverse shock and a contact discontinuity, by the collision of two counter-streaming plasmas, in which a magnetic field can be woven into. In a previous work, we investigated the processes at unmagnetised and at magnetised parallel shocks, whereas in the current work, we move our investigation on to magnetised perpendicular shocks. Due to a much stronger confinement of the particles to the collision region the perpendicular shock develops much faster than the parallel shock. On the other hand, this leads to much weaker turbulence. We are able to find indications for shock surfing acceleration and shock drift acceleration happening at the two shocks leading to populations of pre-accelerated particles that are suitable as a seed population to be injected into further diffusive shock acceleration to be accelerated to even higher energies. We observe the development of filamentary structures in the shock ramp of the forward shock, but not at the reverse shock. This leads to the conclusion that the development of such structures in the shock ramp of quasi-perpendicular collisionless shocks might not necessarily be determined by the existence of a critical sonic Mach number but by a critical shock speed. The results of the investigations done within this dissertation might be useful for further studies of oblique shocks and for studies using hybrid or magnetohydrodynamic simulations. Together with more sophisticated observational methods, these studies will help to bring us closer to an answer as to how particles can be accelerated in supernova remnants and eventually become cosmic rays that can be detected on Earth.}, language = {en} } @phdthesis{Zajnulina2015, author = {Zajnulina, Marina}, title = {Optical frequency comb generation in optical fibres}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-88776}, school = {Universit{\"a}t Potsdam}, pages = {xii, 103}, year = {2015}, abstract = {Optical frequency combs (OFC) constitute an array of phase-correlated equidistant spectral lines with nearly equal intensities over a broad spectral range. The adaptations of combs generated in mode-locked lasers proved to be highly efficient for the calibration of high-resolution (resolving power > 50000) astronomical spectrographs. The observation of different galaxy structures or the studies of the Milky Way are done using instruments in the low- and medium resolution range. To such instruments belong, for instance, the Multi Unit Spectroscopic Explorer (MUSE) being developed for the Very Large Telescope (VLT) of the European Southern Observatory (ESO) and the 4-metre Multi-Object Spectroscopic Telescope (4MOST) being in development for the ESO VISTA 4.1 m Telescope. The existing adaptations of OFC from mode-locked lasers are not resolvable by these instruments. Within this work, a fibre-based approach for generation of OFC specifically in the low- and medium resolution range is studied numerically. This approach consists of three optical fibres that are fed by two equally intense continuous-wave (CW) lasers. The first fibre is a conventional single-mode fibre, the second one is a suitably pumped amplifying Erbium-doped fibre with anomalous dispersion, and the third one is a low-dispersion highly nonlinear optical fibre. The evolution of a frequency comb in this system is governed by the following processes: as the two initial CW-laser waves with different frequencies propagate through the first fibre, they generate an initial comb via a cascade of four-wave mixing processes. The frequency components of the comb are phase-correlated with the original laser lines and have a frequency spacing that is equal to the initial laser frequency separation (LFS), i.e. the difference in the laser frequencies. In the time domain, a train of pre-compressed pulses with widths of a few pico-seconds arises out of the initial bichromatic deeply-modulated cosine-wave. These pulses undergo strong compression in the subsequent amplifying Erbium-doped fibre: sub-100 fs pulses with broad OFC spectra are formed. In the following low-dispersion highly nonlinear fibre, the OFC experience a further broadening and the intensity of the comb lines are fairly equalised. This approach was mathematically modelled by means of a Generalised Nonlinear Schr{\"o}dinger Equation (GNLS) that contains terms describing the nonlinear optical Kerr effect, the delayed Raman response, the pulse self-steepening, and the linear optical losses as well as the wavelength-dependent Erbium gain profile for the second fibre. The initial condition equation being a deeply-modulated cosine-wave mimics the radiation of the two initial CW lasers. The numerical studies are performed with the help of Matlab scripts that were specifically developed for the integration of the GNLS and the initial condition according to the proposed approach for the OFC generation. The scripts are based on the Fourth-Order Runge-Kutta in the Interaction Picture Method (RK4IP) in combination with the local error method. This work includes the studies and results on the length optimisation of the first and the second fibre depending on different values of the group-velocity dispersion of the first fibre. Such length optimisation studies are necessary because the OFC have the biggest possible broadband and exhibit a low level of noise exactly at the optimum lengths. Further, the optical pulse build-up in the first and the second fibre was studied by means of the numerical technique called Soliton Radiation Beat Analysis (SRBA). It was shown that a common soliton crystal state is formed in the first fibre for low laser input powers. The soliton crystal continuously dissolves into separated optical solitons as the input power increases. The pulse formation in the second fibre is critically dependent on the features of the pulses formed in the first fibre. I showed that, for low input powers, an adiabatic soliton compression delivering low-noise OFC occurs in the second fibre. At high input powers, the pulses in the first fibre have more complicated structures which leads to the pulse break-up in the second fibre with a subsequent degradation of the OFC noise performance. The pulse intensity noise studies that were performed within the framework of this thesis allow making statements about the noise performance of an OFC. They showed that the intensity noise of the whole system decreases with the increasing value of LFS.}, language = {en} } @phdthesis{Hanne2015, author = {Hanne, Sandra}, title = {On the subject-object asymmetry in sentence comprehension in aphasia}, pages = {xiii, 263}, year = {2015}, language = {en} } @phdthesis{Allroggen2015, author = {Allroggen, Niklas}, title = {Observation of subsurface flow from the surface : applications of ground-penetrating radar}, school = {Universit{\"a}t Potsdam}, pages = {67}, year = {2015}, language = {en} } @phdthesis{Olas2015, author = {Olas, Justyna Jadwiga}, title = {Nutrients regulate flowering time}, school = {Universit{\"a}t Potsdam}, pages = {190}, year = {2015}, language = {en} } @phdthesis{Chen2015, author = {Chen, Zupeng}, title = {Novel strategies to improve (photo)catalytic performance of carbon nitride-based composites}, pages = {ii, 137}, year = {2015}, language = {en} } @phdthesis{AlSaedy2015, author = {Al-Saedy, Ammar Jaffar Muhesin}, title = {Normally solvable lagrangian boundary value problems}, school = {Universit{\"a}t Potsdam}, pages = {110}, year = {2015}, language = {en} } @phdthesis{Kabelitz2015, author = {Kabelitz, Tina}, title = {Natural and induced variation in the silencing of a Mutator-like transposon from Arabidopsis thaliana}, school = {Universit{\"a}t Potsdam}, pages = {188}, year = {2015}, language = {en} } @phdthesis{Heyer2015, author = {Heyer, Vera}, title = {Native and non-native processing of derived forms}, school = {Universit{\"a}t Potsdam}, pages = {318}, year = {2015}, language = {en} } @phdthesis{Schwarz2015, author = {Schwarz, Dana}, title = {Nanoporous melamine resin materials}, school = {Universit{\"a}t Potsdam}, pages = {146}, year = {2015}, language = {en} } @phdthesis{Kappel2015, author = {Kappel, David}, title = {Multi-spectrum retrieval of maps of Venus' surface emissivity in the infrared}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85301}, school = {Universit{\"a}t Potsdam}, pages = {xix, 226}, year = {2015}, abstract = {The main goal of this cumulative thesis is the derivation of surface emissivity data in the infrared from radiance measurements of Venus. Since these data are diagnostic of the chemical composition and grain size of the surface material, they can help to improve knowledge of the planet's geology. Spectrally resolved images of nightside emissions in the range 1.0-5.1 μm were recently acquired by the InfraRed Mapping channel of the Visible and InfraRed Thermal Imaging Spectrometer (VIRTIS-M-IR) aboard ESA's Venus EXpress (VEX). Surface and deep atmospheric thermal emissions in this spectral range are strongly obscured by the extremely opaque atmosphere, but three narrow spectral windows at 1.02, 1.10, and 1.18 μm allow the sounding of the surface. Additional windows between 1.3 and 2.6 μm provide information on atmospheric parameters that is required to interpret the surface signals. Quantitative data on surface and atmosphere can be retrieved from the measured spectra by comparing them to simulated spectra. A numerical radiative transfer model is used in this work to simulate the observable radiation as a function of atmospheric, surface, and instrumental parameters. It is a line-by-line model taking into account thermal emissions by surface and atmosphere as well as absorption and multiple scattering by gases and clouds. The VIRTIS-M-IR measurements are first preprocessed to obtain an optimal data basis for the subsequent steps. In this process, a detailed detector responsivity analysis enables the optimization of the data consistency. The measurement data have a relatively low spectral information content, and different parameter vectors can describe the same measured spectrum equally well. A usual method to regularize the retrieval of the wanted parameters from a measured spectrum is to take into account a priori mean values and standard deviations of the parameters to be retrieved. This decreases the probability to obtain unreasonable parameter values. The multi-spectrum retrieval algorithm MSR is developed to additionally consider physically realistic spatial and temporal a priori correlations between retrieval parameters describing different measurements. Neglecting geologic activity, MSR also allows the retrieval of an emissivity map as a parameter vector that is common to several spectrally resolved images that cover the same surface target. Even applying MSR, it is difficult to obtain reliable emissivity maps in absolute values. A detailed retrieval error analysis based on synthetic spectra reveals that this is mainly due to interferences from parameters that cannot be derived from the spectra themselves, but that have to be set to assumed values to enable the radiative transfer simulations. The MSR retrieval of emissivity maps relative to a fixed emissivity is shown to effectively avoid most emissivity retrieval errors. Relative emissivity maps at 1.02, 1.10, and 1.18 μm are finally derived from many VIRTIS-M-IR measurements that cover a surface target at Themis Regio. They are interpreted as spatial variations relative to an assumed emissivity mean of the target. It is verified that the maps are largely independent of the choice of many interfering parameters as well as the utilized measurement data set. These are the first Venus IR emissivity data maps based on a consistent application of a full radiative transfer simulation and a retrieval algorithm that respects a priori information. The maps are sufficiently reliable for future geologic interpretations.}, language = {en} } @phdthesis{Mielke2015, author = {Mielke, Christian}, title = {Multi- and Hyperspectral Spaceborne Remote Sensing for Mine Waste and Mineral Deposit Characterization, new Applications to the EnMAP and Sentinel-2 Missions}, school = {Universit{\"a}t Potsdam}, pages = {140}, year = {2015}, language = {en} } @phdthesis{Pingel2015, author = {Pingel, Heiko}, title = {Mountain-range uplift \& climate-system interactions in the Southern Central Andes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82301}, school = {Universit{\"a}t Potsdam}, pages = {xii, 178}, year = {2015}, abstract = {Zwei h{\"a}ufig diskutierte Aspekte der sp{\"a}tk{\"a}nozoischen Gebirgsbildung der Anden sind der Zeitpunkt sowie die Art und Weise der Heraushebung des Puna-Plateaus und seiner Randgebiete innerhalb der Ostkordillere und die damit verbundenen klimatischen {\"A}nderungen in NW Argentinien. Die Ostkordillere trennt die Bereiche des endorheischen, ariden Plateaus von semiariden und extern entw{\"a}sserten intermontanen Becken sowie dem humiden Andenvorland im Osten. Diese Unterschiede verdeutlichen die Bedeutung der {\"o}stlichen Flanken der Anden als orografische Barrieren gegen{\"u}ber feuchten Luftmassen aus dem Osten und spiegelt sich auch in ausgepr{\"a}gten Relief- und Topografiegradienten, der Niederschlagsverteilung, und der Effizienz von Oberfl{\"a}chenprozessen wider. Obwohl das {\"u}bergeordnete Deformationsmuster in diesem Teil der Anden eine ostw{\"a}rts gerichtete Wanderung der Deformationsprozesse im Gebirge indiziert, gibt es hier keine klar definierte Deformationsfront. Hebungsvorg{\"a}nge und die damit im Zusammenhang stehenden Sedimentprozesse setzen r{\"a}umlich und zeitlich sehr unterschiedlich ein. Zudem gestalten periodisch wiederkehrende Deformationsereignisse innerhalb intermontaner Becken und diachrone Hebungsvorg{\"a}nge, durch Reaktivierung {\"a}lterer Sockelstrukturen im Vorland, eine detaillierte Auswertung der r{\"a}umlich-zeitlichen Hebungsmuster zus{\"a}tzlich schwierig. Die vorliegende Arbeit konzentriert sich haupts{\"a}chlich auf die tektonische Entwicklung der Ostkordillere im Nordwesten Argentiniens, die Ablagerungsgeschichte ihrer intermontanen Sedimentbecken und die topografische Entwicklung der Ostflanke des andinen Puna-Plateaus. Im Allgemeinen sind sich die Sedimentbecken der Ostkordillere und der angrenzenden Provinzen, den Sierras Pampeanas und der Santa B{\´a}rbara Region, den durch St{\"o}rungen begrenzten und mit Sedimenten verf{\"u}llten Becken der hochandinen Plateauregion sehr {\"a}hnlich. Deutliche Unterschiede zur Puna bestehen aber dennoch, denn wiederholte Deformations-, Erosions- und Sedimentationsprozesse haben in den intermontanen Becken zu einer vielf{\"a}ltigen Stratigrafie, {\"U}berlagerungsprozessen und einer durch tektonische Prozesse und klimatischen Wandel charakterisierten Landschaft beigetragen. Je nach Erhaltungsgrad k{\"o}nnen in einigen F{\"a}llen Spuren dieser sediment{\"a}ren und tektonischen Entwicklung bis in die Zeit zur{\"u}ckreichen, als diese Bereiche des Gebirges noch Teil eines zusammenh{\"a}ngenden und unverformten Vorlandbeckens waren. Im Nordwesten Argentiniens enthalten k{\"a}nozoische Sedimente zahlreiche datierbare und geochemisch korrelierbare Vulkanaschen, die nicht nur als wichtige Leithorizonte zur Entschl{\"u}sselung tektonischer und sediment{\"a}rer Ereignisse dienen. Die vulkanischen Gl{\"a}ser dieser Aschen archivieren außerdem Wasserstoff-Isotopenverh{\"a}ltnisse fr{\"u}herer Oberfl{\"a}chenwasser, mit deren Hilfe - im Vergleich mit den Isotopenverh{\"a}ltnissen rezenter meteorischer W{\"a}sser - die r{\"a}umliche und zeitliche Entstehung orografischer Barrieren und tektonisch erzwungene Klima- und Umweltver{\"a}nderungen verfolgt werden k{\"o}nnen. Uran-Blei-Datierungen an Zirkonen aus den vulkanischen Aschelagen und die Rekonstruktion sediment{\"a}rer Pal{\"a}otransportrichtungen im intermontanen Humahuaca-Becken in der Ostkordillere (23.5° S) deuten an, dass das heutige Becken bis vor etwa 4.2 Ma Bestandteil eines gr{\"o}ßtenteils uneingeschr{\"a}nkten Ablagerungsbereichs war, der sich bis ins Vorland erstreckt haben muss. Deformation und Hebung {\"o}stlich des heutigen Beckens sorgten dabei f{\"u}r eine fortschreitende Entkopplung des Entw{\"a}sserungsnetzes vom Vorland und eine Umlenkung der Flussl{\"a}ufe nach S{\"u}den. In der Folge erzwang die weitere Hebung der Gebirgsbl{\"o}cke das Abregnen {\"o}stlicher Luftmassen in immer {\"o}stlicher gelegene Bereiche. Zudem k{\"o}nnen periodische Schwankungen der hydrologischen Verbindung des Beckens mit dem Vorland im Zusammenhang mit der Ablagerung und Erosion m{\"a}chtiger Beckenf{\"u}llungen identifiziert werden. Systematische Beziehungen zwischen Verwerfungen, regionalen Diskontinuit{\"a}ten und verstellten Terrassenfl{\"a}chen verweisen außerdem auf ein generelles Muster beckeninterner Deformation, vermutlich als Folge umfangreicher Beckenerosion und damit verbundenen {\"A}nderungen im tektonischen Spannungsfeld der Region. Einige dieser Beobachtungen k{\"o}nnen anhand ver{\"a}nderter Wasserstoff-Isotopenkonzentrationen vulkanischer Gl{\"a}ser aus der k{\"a}nozoischen Stratigrafie untermauert werden. Die δDg-Werte zeigen zwei wesentliche Trends, die einerseits in Verbindung mit Oberfl{\"a}chenhebung innerhalb des Einzugsgebiets zwischen 6.0 und 3.5 Ma stehen und andererseits mit dem Einsetzen semiarider Bedingungen durch Erreichen eines Schwellenwertes der Topografie der {\"o}stlich gelegenen Gebirgsz{\"u}ge nach 3.5 Ma erkl{\"a}rt werden k{\"o}nnen. Tektonisch bedingte Unterbrechung der Sedimentzufuhr aus westlich gelegenen Liefergebieten um 4.2 Ma und die folgende Hinterland-Aridifizierung deuten weiterhin auf die M{\"o}glichkeit hin, dass diese Prozesse die Folge eines lateralen Wachstums des Puna-Plateaus sind. Diese Aridifizierung im Bereich der Puna resultierte in einem ineffizienten, endorheischen Entw{\"a}sserungssystem, das dazu beigetragen hat, das Plateau vor Einschneidung und externer Entw{\"a}sserung zu bewahren und Reliefgegens{\"a}tze aufgrund fortgesetzter Beckensedimentation reduzierte. Die diachrone Natur der Hebungen und Beckenbildungen sowie deren Auswirkungen auf das Flusssystem im angrenzenden Vorland wird sowohl durch detaillierte Analysen der Sedimentherkunft und Transportrichtungen als auch Uran-Blei-Datierungen im Lerma- und Met{\´a}n-Becken (25° S) weiterhin unterstrichen. Das wird besonders deutlich am Beispiel der isolierten Hebung der Sierra de Met{\´a}n vor etwa 10 Ma, die mehr als 50 km von der aktiven orogenen Front im Westen entfernt liegt. Ab 5 Ma sind typische Lithologien der Puna nicht mehr in den Vorlandsedimenten nachweisbar, welches die weitere Hebung innerhalb der Ostkordillere und die hydrologische Isolation des Angastaco-Beckens in dieser Region dokumentiert. Im Sp{\"a}tplioz{\"a}n und Quart{\"a}r ist die Deformation letztlich {\"u}ber das gesamte Vorland verteilt und bis heute aktiv. Um die Beziehungen zwischen tektonisch kontrollierten Ver{\"a}nderungen der Topografie und deren Einfluss auf atmosph{\"a}rische Prozesse besser zu verstehen, werden in dieser Arbeit weitere altersspezifische Wasserstoff-Isotopendaten vulkanischer Gl{\"a}ser aus dem zerbrochenen Vorland, dem Angastaco-Becken in der {\"U}bergangsregion zwischen Ostkordillere und Punarand und anderer intermontaner Becken weiter s{\"u}dlich vorgestellt. Die Resultate dokumentieren {\"a}hnliche H{\"o}henlagen der untersuchten Regionen bis ca. 7 Ma, gefolgt von Hebungsprozessen im Bereich des Angastaco-Beckens. Ein Vergleich mit Isotopendaten vom benachbarten Puna-Plateau hilft abrupte δDg-Schwankungen in den intermontanen Daten zu erkl{\"a}ren und untermauert die Existenz wiederkehrender Phasen verst{\"a}rkt konvektiver Wetterlagen im Plioz{\"a}n, {\"a}hnlich heutigen Bedingungen. In dieser Arbeit werden gel{\"a}ndeorientierte und geochemische Methoden kombiniert, um Erkenntnisse {\"u}ber die Abl{\"a}ufe von topografiebildenden Deformations- und Hebungsprozessen zu gewinnen und Wechselwirkungen mit der daraus resultierenden Niederschlagsverteilung, Erosion und Sedimentation innerhalb tektonisch aktiver Gebirge zu erforschen. Diese Erkenntnisse sind f{\"u}r ein besseres Verst{\"a}ndnis von Subduktionsgebirgen essentiell, besonders hinsichtlich des Deformationsstils und der zeitlich-r{\"a}umlichen Beziehungen bei der Hebung und Sedimentbeckenbildung. Diese Arbeit weist dar{\"u}berhinaus auf die Bedeutung stabiler Isotopensysteme zur Beantwortung pal{\"a}oaltimetrischer Fragestellungen und zur Erforschung von Pal{\"a}oumweltbedingungen hin und liefert wichtige Erkenntnisse f{\"u}r einen kritischen Umgang mit solchen Daten in anderen Regionen.}, language = {en} } @phdthesis{Bosch2015, author = {Bosch, Sina}, title = {Morphosyntactic feature structure in the native and non-native mental lexicon}, pages = {VI, 166}, year = {2015}, language = {en} } @phdthesis{Schroeder2015, author = {Schr{\"o}der, Sarah}, title = {Modelling surface evolution coupled with tectonics}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90385}, school = {Universit{\"a}t Potsdam}, pages = {viii, 129}, year = {2015}, abstract = {This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west.}, language = {en} } @phdthesis{Wust2015, author = {Wust, Johannes}, title = {Mixed workload managment for in-memory databases}, pages = {VIII, 167}, year = {2015}, language = {en} } @phdthesis{Bettenbuehl2015, author = {Bettenb{\"u}hl, Mario}, title = {Microsaccades}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-122-6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72622}, school = {Universit{\"a}t Potsdam}, pages = {iv, 126}, year = {2015}, abstract = {The first thing we do upon waking is open our eyes. Rotating them in our eye sockets, we scan our surroundings and collect the information into a picture in our head. Eye movements can be split into saccades and fixational eye movements, which occur when we attempt to fixate our gaze. The latter consists of microsaccades, drift and tremor. Before we even lift our eye lids, eye movements - such as saccades and microsaccades that let the eyes jump from one to another position - have partially been prepared in the brain stem. Saccades and microsaccades are often assumed to be generated by the same mechanisms. But how saccades and microsaccades can be classified according to shape has not yet been reported in a statistical manner. Research has put more effort into the investigations of microsaccades' properties and generation only since the last decade. Consequently, we are only beginning to understand the dynamic processes governing microsaccadic eye movements. Within this thesis, the dynamics governing the generation of microsaccades is assessed and the development of a model for the underlying processes. Eye movement trajectories from different experiments are used, recorded with a video-based eye tracking technique, and a novel method is proposed for the scale-invariant detection of saccades (events of large amplitude) and microsaccades (events of small amplitude). Using a time-frequency approach, the method is examined with different experiments and validated against simulated data. A shape model is suggested that allows for a simple estimation of saccade- and microsaccade related properties. For sequences of microsaccades, in this thesis a time-dynamic Markov model is proposed, with a memory horizon that changes over time and which can best describe sequences of microsaccades.}, language = {en} } @phdthesis{Karo2015, author = {Karo, Nihad Majeed}, title = {Metamorphic evolution of the Northern Zagros Suture Zone (NZSZ)}, school = {Universit{\"a}t Potsdam}, pages = {127}, year = {2015}, language = {en} } @phdthesis{Gerth2015, author = {Gerth, Sabrina}, title = {Memory limitations in sentence comprehension}, isbn = {978-3-86956-321-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-71554}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 157}, year = {2015}, abstract = {This dissertation addresses the question of how linguistic structures can be represented in working memory. We propose a memory-based computational model that derives offline and online complexity profiles in terms of a top-down parser for minimalist grammars (Stabler, 2011). The complexity metric reflects the amount of time an item is stored in memory. The presented architecture links grammatical representations stored in memory directly to the cognitive behavior by deriving predictions about sentence processing difficulty. Results from five different sentence comprehension experiments were used to evaluate the model's assumptions about memory limitations. The predictions of the complexity metric were compared to the locality (integration and storage) cost metric of Dependency Locality Theory (Gibson, 2000). Both metrics make comparable offline and online predictions for four of the five phenomena. The key difference between the two metrics is that the proposed complexity metric accounts for the structural complexity of intervening material. In contrast, DLT's integration cost metric considers the number of discourse referents, not the syntactic structural complexity. We conclude that the syntactic analysis plays a significant role in memory requirements of parsing. An incremental top-down parser based on a grammar formalism easily computes offline and online complexity profiles, which can be used to derive predictions about sentence processing difficulty.}, language = {en} } @phdthesis{Lohren2015, author = {Lohren, Hanna}, title = {Mechanisms of mercury species-mediated neurotoxicity}, school = {Universit{\"a}t Potsdam}, pages = {141, viii}, year = {2015}, language = {en} } @phdthesis{Baier2015, author = {Baier, Thomas}, title = {Matching events and activities}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-84548}, school = {Universit{\"a}t Potsdam}, pages = {xxii, 213}, year = {2015}, abstract = {Nowadays, business processes are increasingly supported by IT services that produce massive amounts of event data during process execution. Aiming at a better process understanding and improvement, this event data can be used to analyze processes using process mining techniques. Process models can be automatically discovered and the execution can be checked for conformance to specified behavior. Moreover, existing process models can be enhanced and annotated with valuable information, for example for performance analysis. While the maturity of process mining algorithms is increasing and more tools are entering the market, process mining projects still face the problem of different levels of abstraction when comparing events with modeled business activities. Mapping the recorded events to activities of a given process model is essential for conformance checking, annotation and understanding of process discovery results. Current approaches try to abstract from events in an automated way that does not capture the required domain knowledge to fit business activities. Such techniques can be a good way to quickly reduce complexity in process discovery. Yet, they fail to enable techniques like conformance checking or model annotation, and potentially create misleading process discovery results by not using the known business terminology. In this thesis, we develop approaches that abstract an event log to the same level that is needed by the business. Typically, this abstraction level is defined by a given process model. Thus, the goal of this thesis is to match events from an event log to activities in a given process model. To accomplish this goal, behavioral and linguistic aspects of process models and event logs as well as domain knowledge captured in existing process documentation are taken into account to build semiautomatic matching approaches. The approaches establish a pre--processing for every available process mining technique that produces or annotates a process model, thereby reducing the manual effort for process analysts. While each of the presented approaches can be used in isolation, we also introduce a general framework for the integration of different matching approaches. The approaches have been evaluated in case studies with industry and using a large industry process model collection and simulated event logs. The evaluation demonstrates the effectiveness and efficiency of the approaches and their robustness towards nonconforming execution logs.}, language = {en} } @phdthesis{Otto2015, author = {Otto, Katharina Alexandra}, title = {Mass wasting and the Coriolis effect on asteroid Vesta}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87390}, school = {Universit{\"a}t Potsdam}, pages = {XVII, 251}, year = {2015}, abstract = {This work investigates the influence of the Coriolis force on mass motion related to the Rheasilvia impact basin on asteroid (4) Vesta's southern hemisphere. The giant basin is 500km in diameter, with a centre which nearly coincides with the rotation axis of Vesta. The Rheasilvia basin partially overlaps an earlier, similarly large impact basin, Veneneia. Mass motion within and in the vicinity of the Rheasilvia basin includes slumping and landslides, which, primarily due to their small linear extents, have not been noticeably affected by the Coriolis force. However, a series of ridges related to the basin exhibit significant curvature, which may record the effect of the Coriolis force on the mass motion which generated them. In this thesis 32 of these curved ridges, in three geologically distinct regions, were examined. The mass motion velocities from which the ridge curvatures may have resulted during the crater modification stage were investigated. Velocity profiles were derived by fitting inertial circles along the curved ridges and considering both the current and past rotation states of Vesta. An iterative, statistical approach was used, whereby the radii of inertial circles were obtained through repeated fitting to triplets of points across the ridges. The most frequently found radius for each central point was then used for velocity derivation at that point. The results of the velocity analysis are strongly supportive of a Coriolis force origin for the curved ridges. Derived velocities (29.6 ± 24.6 m/s) generally agree well with previously published predictions from numerical simulations of mass motion during the impact process. Topographical features such as local slope gradient and mass deposition regions on the curved ridges also independently agree with regions in which the calculated mass motion accelerates or decelerates. Sections of constant acceleration, deceleration and constant velocity are found, showing that mass motion is being governed by varying conditions of topography, regolith structure and friction. Estimates of material properties such as the effective viscosities (1.9-9.0·10⁶ Pa·s) and coefficients of friction (0.02-0.81) are derived from the velocity profile information in these sections. From measured accelerations of mass motions on the crater wall, it is also shown that the crater walls must have been locally steeper at the time of the mass motion. Together with these novel insights into the state and behaviour of material moving during the modification stage of Rheasilvia's formation, this work represents the first time that the Coriolis Effect on mass motions during crater formation has been shown to result in diagnostic features preserved until today.}, language = {en} } @phdthesis{Pinchasik2015, author = {Pinchasik, Bat-El Shani}, title = {Manipulaton of Microbubbles Inspired by Bubble Use in Nature}, school = {Universit{\"a}t Potsdam}, pages = {123}, year = {2015}, language = {en} } @phdthesis{Kuetter2015, author = {K{\"u}tter, Sissy}, title = {Magnetotelluric measurements across the southern Barberton Greenstone Belt, South Africa}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83198}, school = {Universit{\"a}t Potsdam}, pages = {xix, 156}, year = {2015}, abstract = {Der Barberton Gr{\"u}nsteing{\"u}rtel (BGB) in S{\"u}dafrika geh{\"o}rt zu den wenigen Regionen mit noch gut erhaltener Archaischer Kruste. Seit Jahrhunderten wurde der BGB eingehend untersucht und seine geologischen und tektonischen Strukturen detailliert kartiert. {\"U}ber die tiefere Struktur des BGB ist hingegen wenig bekannt. Zahlreiche Evolutionsmodelle, die auf Altersbestimmungsdaten und strukturellen Informationen beruhen wurden {\"u}ber die Jahre aufgestellt. Diese Theorien sind zumeist widerspr{\"u}chlich. Sie konzentrieren sich im Wesentlichen auf die Frage, ob plattentektonische Prozesse bereits bei der Entwicklung der fr{\"u}hen Erde eine Rolle spielten oder ob vertikale Tektonik, angetrieben durch die im Archaikum h{\"o}heren Temperaturen, die Bildung der heutigen Kontinente bestimmt hat. Um neue Erkenntnisse {\"u}ber die interne Struktur und Entwicklungsgeschichte des BGB zu erhalten, wurden im Rahmen der Deutsch-S{\"u}dafrikanischen Forschungsinitiative Inkaba yeAfrica magnetotellurische (MT) Messungen durchgef{\"u}hrt. Entlang von sechs Profilen, die den gesamten s{\"u}dlichen Teil des BGB's {\"u}berdecken, wurden nahezu 200 MT-Stationen installiert. Tektonische Strukturen wie z. B. (fossile) Verwerfungszonen k{\"o}nnen erh{\"o}hte Leitf{\"a}higigkeiten haben, wenn sich leitf{\"a}hige Mineralisationen innerhalb der Scherzonen gebildet haben. Durch die Abbildung der elektrischen Leitf{\"a}higkeitsverteilung des Untergrundes mit Hilfe von MT Messungen kann der Verlauf tektonischer Strukturen nachvollzogen werden, woraus Schl{\"u}sse {\"u}ber m{\"o}glicherweise abgelaufene tektonische Prozesse gezogen werden k{\"o}nnen. Der gesamte MT Datensatz weist starke St{\"o}reinfl{\"u}sse durch k{\"u}nstliche elektromagnetische Signale auf, die bspw. von Stromleitungen und elektrischen Z{\"a}unen stammen. Insbesondere langperiodische Daten (>1 s) sind davon betroffen, die f{\"u}r die Aufl{\"o}sung tieferer Strukturen notwendig sind. Die Anwendung etablierter Ans{\"a}tze wie Verschiebungsfiltern und der Remote Reference-Methode, f{\"u}hrte zu Verbesserungen vorrangig f{\"u}r Perioden < 1 s. Der langperiodische Bereich ist durch impulsartige St{\"o}rsignale in den magnetischen und dazugeh{\"o}rigen Stufen in den elektrischen Feldkomponenten gepr{\"a}gt. Im Rahmen dieser Arbeit wurde ein neuartiger Zeitbereichs-Filter entwickelt, welcher auf einer abgewandelten Form des Wiener Filters beruht und diese Art von St{\"o}rsignalen aus den Daten entfernt. Durch den Vergleich der Datenvarianz einer lokalen Station mit der einer Referenzstation k{\"o}nnen gest{\"o}rte Zeitsegmente identifiziert werden. Anschließend wird ein Wiener-Filter-Algorithmus angewendet, um f{\"u}r diese Segmente mithilfe der Referenzdaten physikalisch sinnvolle Zeitreihen zu berechnen, mit denen die Daten der lokalen Station ersetzt werden. W{\"a}hrend impulsartige St{\"o}rsignale in den magnetischen Datenkan{\"a}len relativ einfach erfasst werden k{\"o}nnen, ist die Detektion von Vers{\"a}tzen in den elektrischen Zeitreihen je nach Versatzh{\"o}he problematischer. Um dieses Problem zu umgehen, habe ich einen Algorithmus entwickelt, bei dem die Zeitreihen differenziert, gefiltert und im letzten Schritt integriert werden. In einer zweiten von mir entwickelten Filtermethode werden die St{\"o}rsignale durch den Vergleich des kurzzeitigen und des langzeitigen Datenmittelwerts ausfindig gemacht. Bei diesem Filter werden die St{\"o}rsignale aus den Zeitreihen entfernt und durch eine lineare Interpolation ersetzt. Durch die beiden Filtermethoden wurde eine deutliche Verbesserung der Datenqualit{\"a}t bis zu 10 und teilweise 100 s erreicht. Zur Interpretation des MT-Datensatzes wurden 2D und 3D Inversionen durchgef{\"u}hrt. Die so erhaltenen elektrischen Leitf{\"a}higkeitsmodelle zeigen eine gute {\"U}bereinstimmung mit den kartierten, geologischen Strukturen. Die Gesteine des BGB weisen in den Modellen hohe Widerst{\"a}nde auf und sind deutlich von leitf{\"a}higen benachbarten geologischen Strukturen abgegrenzt. Verwerfungszonen korrelieren mit leitf{\"a}higen Strukturen, die sich bis in eine Tiefe von 5 bis 10 km erstrecken. Eine Fortsetzung der Verwerfungszonen {\"u}ber die s{\"u}dliche Grenze des BGB wird in den 2D-Ergebnissen angedeutet. Insgesamt zeigen die Inversionsmodelle, dass vermutlich sowohl plattentektonische als auch vertikaltektonische Prozesse bei der Entstehung des BGB eine wichtige Rolle spielten.}, language = {en} } @phdthesis{HeidemannMalreddy2015, author = {Heidemann-Malreddy, Birte}, title = {Lost in a liminal space?}, school = {Universit{\"a}t Potsdam}, pages = {300}, year = {2015}, language = {en} } @phdthesis{BaerHenney2015, author = {Baer-Henney, Dinah}, title = {Learners' Little Helper}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2015}, language = {en} } @phdthesis{Wang2015, author = {Wang, Rong}, title = {Late quaternary climate and environmental variability inferred from terrigenous sediment records in China and the North Pacific/Bering Sea}, school = {Universit{\"a}t Potsdam}, pages = {91}, year = {2015}, language = {en} } @phdthesis{Pfestorf2015, author = {Pfestorf, Hans}, title = {Land use intensity and insect root herbivores}, school = {Universit{\"a}t Potsdam}, pages = {161}, year = {2015}, language = {en} } @phdthesis{Ramisch2015, author = {Ramisch, Arne}, title = {Lake system development on the northern Tibetan Plateau during the last ~ 12 ka}, school = {Universit{\"a}t Potsdam}, pages = {122}, year = {2015}, language = {en} } @phdthesis{Busch2015, author = {Busch, Jan Philip}, title = {Investigations on mobility of carbon colloid supported nanoscale zero-valent iron (nZVI) for groundwater remediation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-76873}, school = {Universit{\"a}t Potsdam}, pages = {X, 127, XLIII}, year = {2015}, abstract = {Injection of nanoscale zero-valent iron (nZVI) is an innovative technology for in situ installation of a permeable reactive barrier in the subsurface. Zerovalent iron (ZVI) is highly reactive with chlorinated hydrocarbons (CHCs) and renders them into less harmful substances. Application of nZVI instead of granular ZVI can increase rates of dechlorination of CHCs by orders of magnitude, due to its higher surface area. This approach is still difficult to apply due to fast agglomeration and sedimentation of colloidal suspensions of nZVI, which leads to very short transport distances. To overcome this issue of limited mobility, polyanionic stabilisers are added to increase surface charge and stability of suspensions. In field experiments maximum transport distances of a few metres were achieved. A new approach, which is investigated in this thesis, is enhanced mobility of nZVI by a more mobile carrier colloid. The investigated composite material consists of activated carbon, which is loaded with nZVI. In this cumulative thesis, transport characteristics of carbon-colloid supported nZVI (c-nZVI) are investigated. Investigations started with column experiments in 40 cm columns filled with various porous media to investigate on physicochemical influences on transport characteristics. The experimental setup was enlarged to a transport experiment in a 1.2-m-sized two-dimensional aquifer tank experiment, which was filled with granular porous media. Further, a field experiment was performed in a natural aquifer system with a targeted transport distance of 5.3 m. Parallel to these investigations, alternative methods for transport observations were investigated by using noninvasive tomographic methods. Experiments using synchrotron radiation and magnetic resonance (MRI) were performed to investigate in situ transport characteristics in a non-destructive way. Results from column experiments show potentially high mobility under environmental relevant conditions. Addition of mono-and bivalent salts, e.g. more than 0.5 mM/L CaCl2, might decrease mobility. Changes in pH to values below 6 can inhibit mobility at all. Measurements of colloid size show changes in the mean particle size by a factor of ten. Measurements of zeta potential revealed an increase of -62 mV to -82 mV. Results from the 2D-aquifer test system suggest strong particle deposition in the first centimetres and only weak straining in the further travel path and no gravitational influence on particle transport. Straining at the beginning of the travel path in the porous medium was observed with tomographic investigations of transport. MRI experiments revealed similar results to the previous experiments, and observations using synchrotron radiation suggest straining of colloids at pore throats. The potential for high transport distances, which was suggested from laboratory experiments, was confirmed in the field experiment, where the transport distance of 5.3 m was reached by at least 10\% of injected nZVI. Altogether, transport distances of the investigated carbon-colloid supported nZVI are higher than published results of traditional nZVI.}, language = {en} } @phdthesis{Liput2015, author = {Liput, Magdalena}, title = {Investigation of the biogenesis and use of ribosomes in Arabidopsis thaliana}, school = {Universit{\"a}t Potsdam}, pages = {158}, year = {2015}, language = {en} } @phdthesis{Menke2015, author = {Menke, Sebastian}, title = {Investigating the impact of intrinsic and extrinsic factors on gut bacterial communities in Namibian wildlife species using a large-scale next-generation sequencing approach}, school = {Universit{\"a}t Potsdam}, pages = {109}, year = {2015}, language = {en} } @phdthesis{Helpa2015, author = {Helpa, Vanessa}, title = {Interplay between mineral reaction and deformation via structural defects}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90332}, school = {Universit{\"a}t Potsdam}, pages = {x, 104}, year = {2015}, abstract = {This thesis contains three experimental studies addressing the interplay between deformation and the mineral reaction between natural calcite and magnesite. The solid-solid mineral reaction between the two carbonates causes the formation of a magnesio-calcite precursor layer and a dolomite reaction rim in every experiment at isostatic annealing and deformation conditions. CHAPTER 1 briefly introduces general aspects concerning mineral reactions in nature and diffusion pathways for mass transport. Moreover, results of previous laboratory studies on the influence of deformation on mineral reactions are summarized. In addition, the main goals of this study are pointed out. In CHAPTER 2, the reaction between calcite and magnesite single crystals is examined at isostatic annealing conditions. Time series performed at a fixed temperature revealed a diffusion-controlled dolomite rim growth. Two microstructural domains could be identified characterized by palisade-shaped dolomite grains growing into the magnesite and granular dolomite growing towards calcite. A model was provided for the dolomite rim growth based on the counter-diffusion of CaO and MgO. All reaction products exhibited a characteristic crystallographic relationship with respect to the calcite reactant. Moreover, kinetic parameters of the mineral reaction were determined out of a temperature series at a fixed time. The main goal of the isostatic test series was to gain information about the microstructure evolution, kinetic parameters, chemical composition and texture development of the reaction products. The results were used as a reference to quantify the influence of deformation on the mineral reaction. CHAPTER 3 deals with the influence of non-isostatic deformation on dolomite and magnesio-calcite layer production between calcite and magnesite single crystals. Deformation was achieved by triaxial compression and by torsion. Triaxial compression up to 38 MPa axial stress at a fixed time showed no significant influence of stress and strain on dolomite formation. Time series conducted at a fixed stress yield no change in growth rates for dolomite and magnesio-calcite at low strains. Slightly larger magnesio-calcite growth rates were observed at strains above >0.1. High strains at similar stresses were caused by the activation of additional glide systems in the calcite single crystal and more mobile dislocations in the magnesio-calcite grains, providing fast diffusion pathways. In torsion experiments a gradual decrease in dolomite and magnesio-calcite layer thickness was observed at a critical shear strain. During deformation, crystallographic orientations of reaction products rearranged with respect to the external framework. A direct effect of the mineral reaction on deformation could not be recognized due to the relatively small reaction product widths. In CHAPTER 4, the influence of starting material microfabrics and the presence of water on the reaction kinetics was evaluated. In these experimental series polycrystalline material was in contact with single crystals or two polycrystalline materials were used as reactants. Isostatic annealing resulted in different dolomite and magnesio-calcite layer thicknesses, depending on starting material microfabrics. The reaction progress at the magnesite interface was faster with smaller magnesite grain size, because grain boundaries provided fast pathways for diffusion and multiple nucleation sites for dolomite formation. Deformation by triaxial compression and torsion yield lower dolomite rim thicknesses compared to annealed samples for the same time. This was caused by grain coarsening of polycrystalline magnesite during deformation. In contrast, magnesio-calcite layers tended to be larger during deformation, which triggered enhanced diffusion along grain boundaries. The presence of excess water had no significant influence on the reaction kinetics, at least if the reactants were single crystals. In CHAPTER 5 general conclusions about the interplay between deformation and the mineral reaction in the carbonate system are presented. Finally, CHAPTER 6 highlights possible future work in the carbonate system based on the results of this study.}, language = {en} } @phdthesis{Rajasundaram2015, author = {Rajasundaram, Dhivyaa}, title = {Integrative analysis of heterogeneous plant cell wall related data}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-77652}, school = {Universit{\"a}t Potsdam}, pages = {xii, 205}, year = {2015}, abstract = {Plant cell walls are complex structures that underpin plant growth and are widely exploited in diverse human activities thus placing them with a central importance in biology. Cell walls have been a prominent area of research for a long time, but the chemical complexity and diversity of cell walls not just between species, but also within plants, between cell-types, and between cell wall micro-domains pose several challenges. Progress accelerated several-fold in cell wall biology owing to advances in sequencing technology, aided soon thereafter by advances in omics and imaging technologies. This development provides additional perspectives of cell walls across a rapidly growing number of species, highlighting a myriad of architectures, compositions, and functions. Furthermore, rather than the component centric view, integrative analysis of the different cell wall components across system-levels help to gain a more in-depth understanding of the structure and biosynthesis of the cell envelope and its interactions with the environment. To this end, in this work three case studies are detailed, all pertaining to the integrative analysis of heterogeneous cell wall related data arising from different system-levels and analytical techniques. A detailed account of multiblock methods is provided and in particular canonical correlation and regression methods of data integration are discussed. In the first integrative analysis, by employing canonical correlation analysis - a multivariate statistical technique to study the association between two datasets - novel insight to the relationship between glycans and phenotypic traits is gained. In addition, sparse partial least squares regression approach that adapts Lasso penalization and allows for the selection of a subset of variables was employed. The second case study focuses on an integrative analysis of images obtained from different spectroscopic techniques. By employing yet another multiblock approach - multiple co-inertia analysis, insitu biochemical composition of cell walls from different cell-types is studied thereby highlighting the common and complementary parts of the two hyperspectral imaging techniques. Finally, the third integrative analysis facilitates gene expression analysis of the Arabidopsis root transcriptome and translatome for the identification of cell wall related genes and compare expression patterns of cell wall synthesis genes. The computational analysis considered correlation and variation of expression across cell-types at both system-levels, and also provides insight into the degree of co-regulatory relationships that are preserved between the two processes. The integrative analysis of glycan data and phenotypic traits in cotton fibers using canonical methods led to the identification of specific polysaccharides which may play a major role during fiber development for the final fiber characteristics. Furthermore, this analysis provides a base for future studies on glycan arrays in case of developing cotton fibers. The integrative analysis of images from infrared and Raman spectroscopic approaches allowed the coupling of different analytical techniques to characterize complex biological material, thereby, representing various facets of their chemical properties. Moreover, the results from the co-inertia analysis demonstrated that the study was well adapted as it is relevant for coupling data tables in a symmetric way. Several indicators are proposed to investigate how the global and block scores are related. In addition, studying the root cells of \textit{Arabidopsis thaliana} allowed positing a novel pipeline to systematically investigate and integrate the different levels of information available at the global and single-cell level. The conducted analysis also confirms that previously identified key transcriptional activators of secondary cell wall development display highly conserved patterns of transcription and translation across the investigated cell-types. Moreover, the biological processes that display conserved and divergent patterns based on the cell-type-specific expression and translation levels are identified.}, language = {en} } @phdthesis{Herde2015, author = {Herde, Antje}, title = {Individual differences and seasonal variation in behaviour}, school = {Universit{\"a}t Potsdam}, pages = {111}, year = {2015}, language = {en} } @phdthesis{Cattania2015, author = {Cattania, Camilla}, title = {Improvement of aftershock models based on Coulomb stress changes and rate-and-state dependent friction}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87097}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 123}, year = {2015}, abstract = {Earthquake clustering has proven the most useful tool to forecast changes in seismicity rates in the short and medium term (hours to months), and efforts are currently being made to extend the scope of such models to operational earthquake forecasting. The overarching goal of the research presented in this thesis is to improve physics-based earthquake forecasts, with a focus on aftershock sequences. Physical models of triggered seismicity are based on the redistribution of stresses in the crust, coupled with the rate-and-state constitutive law proposed by Dieterich to calculate changes in seismicity rate. This type of models are known as Coulomb- rate and-state (CRS) models. In spite of the success of the Coulomb hypothesis, CRS models typically performed poorly in comparison to statistical ones, and they have been underepresented in the operational forecasting context. In this thesis, I address some of these issues, and in particular these questions: (1) How can we realistically model the uncertainties and heterogeneity of the mainshock stress field? (2) What is the effect of time dependent stresses in the postseismic phase on seismicity? I focus on two case studies from different tectonic settings: the Mw 9.0 Tohoku megathrust and the Mw 6.0 Parkfield strike slip earthquake. I study aleatoric uncertainties using a Monte Carlo method. I find that the existence of multiple receiver faults is the most important source of intrinsic stress heterogeneity, and CRS models perform better when this variability is taken into account. Epistemic uncertainties inherited from the slip models also have a significant impact on the forecast, and I find that an ensemble model based on several slip distributions outperforms most individual models. I address the role of postseismic stresses due to aseismic slip on the mainshock fault (afterslip) and to the redistribution of stresses by previous aftershocks (secondary triggering). I find that modeling secondary triggering improves model performance. The effect of afterslip is less clear, and difficult to assess for near-fault aftershocks due to the large uncertainties of the afterslip models. Off-fault events, on the other hand, are less sensitive to the details of the slip distribution: I find that following the Tohoku earthquake, afterslip promotes seismicity in the Fukushima region. To evaluate the performance of the improved CRS models in a pseudo-operational context, I submitted them for independent testing to a collaborative experiment carried out by CSEP for the 2010-2012 Canterbury sequence. Preliminary results indicate that physical models generally perform well compared to statistical ones, suggesting that CRS models may have a role to play in the future of operational forecasting. To facilitate efforts in this direction, and to enable future studies of earthquake triggering by time dependent processes, I have made the code open source. In the final part of this thesis I summarize the capabilities of the program and outline technical aspects regarding performance and parallelization strategies.}, language = {en} } @phdthesis{Apelt2015, author = {Apelt, Federico}, title = {Implementation of an imaging-based approach using a 3D light-field camera to analyse plant growth behaviour}, school = {Universit{\"a}t Potsdam}, pages = {227}, year = {2015}, language = {en} } @phdthesis{Sakschewski2015, author = {Sakschewski, Boris}, title = {Impacts of major anthropogenic pressures on the terrestrial biosphere and its resilience to global change}, school = {Universit{\"a}t Potsdam}, pages = {159}, year = {2015}, language = {en} } @phdthesis{Alseekh2015, author = {Alseekh, Saleh}, title = {Identification and mode of inheritance of quantitative trait loci (QTL) for metabolite abundance in tomato}, school = {Universit{\"a}t Potsdam}, pages = {134}, year = {2015}, language = {en} } @phdthesis{Duethmann2015, author = {D{\"u}thmann, Doris}, title = {Hydrological modeling of mountain catchments in Central Asia}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-80071}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 95}, year = {2015}, abstract = {Water resources from Central Asia's mountain regions have a high relevance for the water supply of the water scarce lowlands. A good understanding of the water cycle in these mountain regions is therefore needed to develop water management strategies. Hydrological modeling helps to improve our knowledge of the regional water cycle, and it can be used to gain a better understanding of past changes or estimate future hydrologic changes in view of projected changes in climate. However, due to the scarcity of hydrometeorological data, hydrological modeling for mountain regions in Central Asia involves large uncertainties. Addressing this problem, the first aim of this thesis was to develop hydrological modeling approaches that can increase the credibility of hydrological models in data sparse mountain regions. This was achieved by using additional data from remote sensing and atmospheric modeling. It was investigated whether spatial patterns from downscaled reanalysis data can be used for the interpolation of station-based precipitation data. This approach was compared to other precipitation estimates using a hydrologic evaluation based on hydrological modeling and a comparison of simulated and observed discharge, which demonstrated a generally good performance of this method. The study further investigated the value of satellite-derived snow cover data for model calibration. Trade-offs of good model performance in terms of discharge and snow cover were explicitly evaluated using a multiobjective optimization algorithm, and the results were contrasted with single-objective calibration and Monte Carlo simulations. The study clearly shows that the additional use of snow cover data improved the internal consistency of the hydrological model. In this context, it was further investigated for the first time how many snow cover scenes were required for hydrological model calibration. The second aim of this thesis was the application of the hydrological model in order to investigate the causes of observed streamflow increases in two headwater catchments of the Tarim River over the recent decades. This simulation-based approach for trend attribution was complemented by a data-based approach. The hydrological model was calibrated to discharge and glacier mass balance data and considered changes in glacier geometry over time. The results show that in the catchment with a lower glacierization, increasing precipitation and temperature both contributed to the streamflow increases, while in the catchment with a stronger glacierization, increasing temperatures were identified as the dominant driver.}, language = {en} } @phdthesis{Swiadek2015, author = {Swiadek, Magdalena Agnieszka}, title = {Hybrid necrosis in local populations of Arabidopsis thaliana}, school = {Universit{\"a}t Potsdam}, pages = {109}, year = {2015}, language = {en} } @phdthesis{FuentesTaladriz2015, author = {Fuentes Taladriz, Paulina Andrea}, title = {High-level production of the antimalarial drug precursor artemisinic acid in plastids and in vivo visualization of plastid-to-nucleus gene transfer}, school = {Universit{\"a}t Potsdam}, pages = {148}, year = {2015}, language = {en} } @phdthesis{Prokhorov2015, author = {Prokhorov, Boris E.}, title = {High-latitude coupling processes between thermospheric circulation and solar wind driven magnetospheric currents and plasma convection}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-92353}, school = {Universit{\"a}t Potsdam}, pages = {117}, year = {2015}, abstract = {The high-latitudinal thermospheric processes driven by the solar wind and Interplanetary Magnetic Field (IMF) interaction with the Earth magnetosphere are highly variable parts of the complex dynamic plasma environment, which represent the coupled Magnetosphere - Ionosphere - Thermosphere (MIT) system. The solar wind and IMF interactions transfer energy to the MIT system via reconnection processes at the magnetopause. The Field Aligned Currents (FACs) constitute the energetic links between the magnetosphere and the Earth ionosphere. The MIT system depends on the highly variable solar wind conditions, in particular on changes of the strength and orientation of the IMF. In my thesis, I perform an investigation on the physical background of the complex MIT system using the global physical - numerical, three-dimensional, time-dependent and self-consistent Upper Atmosphere Model (UAM). This model describes the thermosphere, ionosphere, plasmasphere and inner magnetosphere as well as the electrodynamics of the coupled MIT system for the altitudinal range from 80 (60) km up to the 15 Earth radii. In the present study, I developed and investigated several variants of the high-latitudinal electrodynamic coupling by including the IMF dependence of FACs into the UAM model. For testing, the various variants were applied to simulations of the coupled MIT system for different seasons, geomagnetic activities, various solar wind and IMF conditions. Additionally, these variants of the theoretical model with the IMF dependence were compared with global empirical models. The modelling results for the most important thermospheric parameters like neutral wind and mass density were compared with satellite measurements. The variants of the UAM model with IMF dependence show a good agreement with the satellite observations. In comparison with the empirical models, the improved variants of the UAM model reproduce a more realistic meso-scale structures and dynamics of the coupled MIT system than the empirical models, in particular at high latitudes. The new configurations of the UAM model with IMF dependence contribute to the improvement of space weather prediction.}, language = {en} }