@article{SelleGraeffSalzmannetal.2016, author = {Selle, Benny and Graeff, Thomas and Salzmann, Thomas and Oswald, Sascha and Walther, Marc and Miegel, Konrad}, title = {Investigation of a renatured fen catchment on the Baltic Sea coast of Mecklenburg - Part II: Salt dynamics and water balance}, series = {Hydrologie und Wasserbewirtschaftung}, volume = {60}, journal = {Hydrologie und Wasserbewirtschaftung}, publisher = {Bundesanst. f{\~A}¼r Gew{\~A}\isserkunde}, address = {Koblenz}, issn = {1439-1783}, doi = {10.5675/HyWa_2016.4_2}, pages = {259 -- 268}, year = {2016}, abstract = {Coastal fens like the nature reserve "Hutelmoor und Heiligensee" (north-eastern Germany) are important landscape elements along the southern Baltic coast, which exchange fresh water and brackish water with the Baltic Sea. These exchange processes can be understood as experiments with a natural tracer, which may be used to investigate the hydrologic behaviour of these fen systems. With the establishment of coastal protection measures such as dunes and dikes, the installation of surface drainage and, more recently, also nature conservation measures, the hydrologic regime of these coastal wetlands has constantly altered over the last centuries.The rehabilitated wetland "Hutelnnoor und Heiligensee" is suitable for an analysis of hydrologic change as it has been monitored over the time period since nature conservation measures started in the 1990s. Collected data sets included observation of groundwater levels and electrical conductivities, weather data as well as discharge at the outlet of the drainage catchment. In this article, as a second part of the dual publication, processes and quantified process magnitudes have been identified that govern the salt balance of the study area including its variability in space and time. It was detected that - over the period of rehabilitation - salt water entered the catchment with an episodic storm surge by wave overtopping of dunes in 1995. The intruded brackish water was then diluted, which was a slow process extending over decades. It was governed by local groundwater recharge from precipitation and the inflow of relatively fresh groundwater from the hinterland. It is concluded that salt inputs from the Baltic Sea provide a natural tracer of hydrological processes, which can be readily monitored via electrical conductivity measurements.}, language = {de} } @misc{JingHesseKumaretal.2018, author = {Jing, Miao and Heße, Falk and Kumar, Rohini and Wang, Wenqing and Fischer, Thomas and Walther, Marc and Zink, Matthias and Zech, Alraune and Samaniego, Luis and Kolditz, Olaf and Attinger, Sabine}, title = {Improved regional-scale groundwater representation by the coupling of the mesoscale Hydrologic Model (mHM v5.7) to the groundwater model OpenGeoSys (OGS)}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, number = {851}, issn = {1866-8372}, doi = {10.25932/publishup-42703}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427030}, pages = {1989 -- 2007}, year = {2018}, abstract = {Most large-scale hydrologic models fall short in reproducing groundwater head dynamics and simulating transport process due to their oversimplified representation of groundwater flow. In this study, we aim to extend the applicability of the mesoscale Hydrologic Model (mHM v5.7) to subsurface hydrology by coupling it with the porous media simulator OpenGeoSys (OGS). The two models are one-way coupled through model interfaces GIS2FEM and RIV2FEM, by which the grid-based fluxes of groundwater recharge and the river-groundwater exchange generated by mHM are converted to fixed-flux boundary conditions of the groundwater model OGS. Specifically, the grid-based vertical reservoirs in mHM are completely preserved for the estimation of land-surface fluxes, while OGS acts as a plug-in to the original mHM modeling framework for groundwater flow and transport modeling. The applicability of the coupled model (mHM-OGS v1.0) is evaluated by a case study in the central European mesoscale river basin - Nagelstedt. Different time steps, i.e., daily in mHM and monthly in OGS, are used to account for fast surface flow and slow groundwater flow. Model calibration is conducted following a two-step procedure using discharge for mHM and long-term mean of groundwater head measurements for OGS. Based on the model summary statistics, namely the Nash-Sutcliffe model efficiency (NSE), the mean absolute error (MAE), and the interquartile range error (QRE), the coupled model is able to satisfactorily represent the dynamics of discharge and groundwater heads at several locations across the study basin. Our exemplary calculations show that the one-way coupled model can take advantage of the spatially explicit modeling capabilities of surface and groundwater hydrologic models and provide an adequate representation of the spatiotemporal behaviors of groundwater storage and heads, thus making it a valuable tool for addressing water resources and management problems.}, language = {en} } @article{JingHesseKumaretal.2018, author = {Jing, Miao and Hesse, Falk and Kumar, Rohini and Wang, Wenqing and Fischer, Thomas and Walther, Marc and Zink, Matthias and Zech, Alraune and Samaniego, Luis and Kolditz, Olaf and Attinger, Sabine}, title = {Improved regional-scale groundwater representation by the coupling of the mesoscale Hydrologic Model (mHM v5.7) to the groundwater model OpenGeoSys (OGS)}, series = {Geoscientific model development : an interactive open access journal of the European Geosciences Union}, volume = {11}, journal = {Geoscientific model development : an interactive open access journal of the European Geosciences Union}, number = {5}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1991-959X}, doi = {10.5194/gmd-11-1989-2018}, pages = {1989 -- 2007}, year = {2018}, abstract = {Most large-scale hydrologic models fall short in reproducing groundwater head dynamics and simulating transport process due to their oversimplified representation of groundwater flow. In this study, we aim to extend the applicability of the mesoscale Hydrologic Model (mHM v5.7) to subsurface hydrology by coupling it with the porous media simulator OpenGeoSys (OGS). The two models are one-way coupled through model interfaces GIS2FEM and RIV2FEM, by which the grid-based fluxes of groundwater recharge and the river-groundwater exchange generated by mHM are converted to fixed-flux boundary conditions of the groundwater model OGS. Specifically, the grid-based vertical reservoirs in mHM are completely preserved for the estimation of land-surface fluxes, while OGS acts as a plug-in to the original mHM modeling framework for groundwater flow and transport modeling. The applicability of the coupled model (mHM-OGS v1.0) is evaluated by a case study in the central European mesoscale river basin - Nagelstedt. Different time steps, i.e., daily in mHM and monthly in OGS, are used to account for fast surface flow and slow groundwater flow. Model calibration is conducted following a two-step procedure using discharge for mHM and long-term mean of groundwater head measurements for OGS. Based on the model summary statistics, namely the Nash-Sutcliffe model efficiency (NSE), the mean absolute error (MAE), and the interquartile range error (QRE), the coupled model is able to satisfactorily represent the dynamics of discharge and groundwater heads at several locations across the study basin. Our exemplary calculations show that the one-way coupled model can take advantage of the spatially explicit modeling capabilities of surface and groundwater hydrologic models and provide an adequate representation of the spatiotemporal behaviors of groundwater storage and heads, thus making it a valuable tool for addressing water resources and management problems.}, language = {en} } @article{MiegelGraeffFrancketal.2017, author = {Miegel, Konrad and Gr{\"a}ff, Thomas and Franck, Christian and Salzmann, Thomas and Bronstert, Axel and Walther, Marc and Oswald, Sascha}, title = {Auswirkungen des Sturmhochwassers der Ostsee am 4./5. Januar 2017 auf das renaturierte Nieder- moor „H{\"u}telmoor und Heiligensee" an der deut- schen Ostseek{\"u}ste}, series = {Hydrologie und Wasserbewirtschaftung}, volume = {61}, journal = {Hydrologie und Wasserbewirtschaftung}, number = {4}, publisher = {Bundesanst. f{\"u}r Gew{\"a}sserkunde}, address = {Koblenz}, issn = {1439-1783}, doi = {10.5675/HyWa_2017,4_2}, pages = {232 -- 243}, year = {2017}, abstract = {Entlang der K{\"u}stenniederung des Naturschutzgebietes „H{\"u}telmoor und Heiligensee", ca. 6 km nord{\"o}stlich von Rostock-Warnem{\"u}nde gelegen, wird seit dem Jahr 2000 die K{\"u}stend{\"u}ne nicht mehr instand gehalten. Im Rahmen der Renaturierung des Gebietes werden so grunds{\"a}tzlich wieder {\"U}berflutungen bei Ostseehochwassern zugelassen, was bisher jedoch noch nicht eingetreten ist. Am 4./5. Januar 2017 ereignete sich ein Sturmhochwasser der Ostsee, mit einem Scheitelwasserstand in Warnem{\"u}nde, der sich zwischen dem 10- und 20-j{\"a}hrlichen Hochwasserstand einordnet. Dennoch kam es bei diesem Ereignis nicht zum D{\"u}nendurchbruch und zur seeseitigen {\"U}berflutung, wohl aber zum binnenseitigen Einstrom von Salz- bzw. Brackwasser. Dieser erfolgte {\"u}ber den Graben, durch den das Gebiet normalerweise {\"u}ber die Warnow in die Ostsee entw{\"a}ssert. Durch das Einstr{\"o}men {\"u}ber die Sohlschwelle, sonst Auslass des Gebietes, stiegen die Wasserst{\"a}nde und Salzkonzentrationen in der s{\"u}dwestlichen H{\"a}lfte der Niederung an. Mit zunehmender Entfernung zur Sohlschwelle waren diese Auswirkungen jedoch geringer sp{\"u}rbar. Dies gilt wegen der Retentionswirkung der Niederung mehr f{\"u}r den Wasserstand als f{\"u}r die Salzkonzentration. W{\"a}hrend der Wasserstand durch den Einstau der Niederung und {\"U}berschwemmungen fl{\"a}chenhaft anstieg, breitete sich die Salzfront pr{\"a}ferentiell in den ehemaligen Entw{\"a}sserungsgr{\"a}ben, die trotz des Einstaus nach wie vor hydraulisch aktiv sind, eher linienhaft aus. Diese Interpretation beruht auf Messergebnissen von Wasserstand, elektrischer Leitf{\"a}higkeit und Wassertemperatur.}, language = {de} }