@phdthesis{Raju2021,
  author    = {Raju, Rajarshi Roy},
  title     = {'Smart' Janus emulsions},
  school      = {Universit{\"a}t Potsdam},
  year      = {2021},
  abstract  = {Emulsions constitute one of the most prominent and continuously evolving research areas in Colloid Chemistry, which involves the preparation of mixtures or dispersions of immiscible components in a continuous medium. Besides conventional oil-in-water or water-in-oil emulsions, other emulsions of complex droplet morphologies have recently attracted significant research interests. Especially Janus emulsions, in which each droplet is comprised of two distinct sub-regions, have shown versatile potential applications. One of their advantages is the possibility of compartmentalization, which enables to play with two different chemistries in a single droplet. Though microfluidic methods are conventionally used to prepare Janus emulsions, their industrial applications are largely hindered by low throughput and extensive instrumentations. Recently, it has been discovered that simply one-pot moderate/high energy emulsification is also capable of developing Janus morphology, although their preparation and stabilization remain rather substantially challenging. This cumulative doctoral thesis focuses on the preparation and characterization of 'smart' Janus emulsions, i.e. Janus emulsions with special stimuli-responsive features. One-step moderate/high energy emulsification of olive and silicone oil in an aqueous medium was carried out. Special consideration was devoted to the interfacial tensions among the components to maintain the criteria of forming characteristic droplet architectures, in addition to avoiding multiple emulsion destabilization phenomena like imminent phase separation or even separated droplet formation. A series of investigations were conducted related to the formation of complexes of charged macromolecules and role of them as stabilizers to achieve stable Janus emulsions for a realistic timeframe (more than 3 months). The correlation between the size of the stabilizer particles and the droplet size of emulsion was established. Furthermore, it was observed that Janus emulsion gels with interesting rheological properties can be fabricated in the presence of suitable polyelectrolyte complexes. Janus emulsions that could be influenced by pH, temperature or magnetic field were successfully produced in presence of characteristic stimuli-responsive stabilizers. Afterwards, the effect of these changes was studied by different characterization techniques. The size and morphology could be tuned easily by changing the pH. The incorporation of iron oxide magnetic nanoparticles (synthesized separately by a co-precipitation method) to one component of the Janus emulsion was carried out so that the movement and orientation of the complex droplets in aqueous media could be controlled by an external magnetic field. Additionally, temperature-triggered instantaneous reversible breakdown of Janus droplets was also accomplished. The responses of the Janus droplets by the stimuli were well-documented and explained. Another goal of the present contribution was to exploit this special morphological feature of emulsions as a template for producing porous materials. This was demonstrated by the preparation of ultralight magnetic responsive aerogels, utilizing Janus emulsion gels. The produced aerogels also showed the capacity to separate toxic dye from water. To the best of our knowledge, this is the first example of investigation towards batch scale production of Janus emulsion with such special stimuli-responsive properties by a simple bulk emulsification method.},
  language  = {en}
}
@phdthesis{Sand2021,
  author    = {Sand, Patrick},
  title     = {{\"U}bergangsmetallkatalysierte Funktionalisierungsreaktionen an Vinylsulfonylverbindungen},
  doi       = {10.25932/publishup-53687},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-536879},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 169},
  year      = {2021},
  abstract  = {Innerhalb dieser Arbeit erfolgte die erstmalige systematische Untersuchung von Vinylsulfons{\"a}ureethylester (1a), Phenylvinylsulfon (1b), N-Benzyl-N-methylethensulfonamid (1c) in der FUJIWARA-MORITANI Reaktion (alternativ als DHR bezeichnet). Bei dieser {\"u}bergangsmetallkatalysierten Reaktion erfolgt der Aufbau einer neuen C-C-Bindung unter der doppelten Aktivierung einer C-H-Bindung. Somit kann ein atom{\"o}konomischer Aufbau von Molek{\"u}len realisiert werden, da keine Beiprodukte in Form von Salzen entstehen. Als aromatischer Reaktant wurden Acetanilide (2) verwendet, damit eine regiospezifische Kupplung durch die katalysatordirigierende Acetamid-Gruppe (CDG) erfolgt. F{\"u}r die Pd-katalysierte DHR wurde eine umfangreiche Optimierung durchgef{\"u}hrt und anschließend konnten neun verschieden, substituierte 2 mit 1a und sieben verschieden, substituierte 2 mit 1b funktionalisiert werden. Da eine Reaktion mit 1c ausblieb, erfolgte ein Wechsel auf eine Ru-katalysierte Methode f{\"u}r die DHR. Mit dieser Methode konnte 1c mit Acetaniliden funktionalisiert werden und das Spektrum der verwendeten 2, in Form von deaktivierenden Substituenten erweitert werden. Im Anschluss wurden die sulfalkenylierten Acetanilide in weiterf{\"u}hrenden Reaktionen untersucht. Hierf{\"u}r wurde eine Reaktionssequenz bestehend aus einer DeacetylierungDiazotierung-Kupplungsreaktion verwendet, um die Acetamid-Gruppe in eine Abgangsgruppe zu {\"u}berf{\"u}hren und danach in einer MATSUDA-HECK Reaktion zu kuppeln. Mit dieser Methode konnten mehrere 1,2-Dialkenylbenzole erhalten werden und die CDG ein weiteres Mal genutzt werden. Neben der {\"U}berf{\"u}hrung der CDG in eine Abgangsgruppe konnte diese auch in die Synthese verschiedener Heterozyklen integriert werden. Daf{\"u}r erfolgte zun{\"a}chst eine 1,3-Zykloaddition durch deprotonierten Tosylmethylisocanid an der elektronenarmen Sulfalkenylgruppe zur Synthese von Pyrrolen. Anschließend erfolgte eine Kupplung der PyrrolFunktion und der CDG durch Zyklokondensation, wodurch Quinoline dargestellt wurden. Durch diese Synthesen konnten Schwefelanaloga des Naturstoffes Marinoquionolin A erhalten werden. Ein weitere {\"u}bergangsmetallkatalysierte C-H-Aktivierungsreaktion, die MATSUDA-HECK Reaktion, wurde genutzt, um 1b zu mit verschieden, subtituierten Diazoniumsalzen zu arylieren. Hier konnten zahlreichen Styrenylsulfone erhalten werden. Der erfolgreiche Einsatz der Vinylsulfonylverbindungen in der Kreuzmetathese konnte innerhalb dieser Arbeit nicht erreicht werden. Daher erfolgte die Synthese verschiedener dialkenylierter Sulfonamide. Hierf{\"u}r wurde die Kettenl{\"a}nge der Alkenyl-Gruppe am Schwefel zwischen 2-3 und am Stickstoff zwischen 3-4 variiert. Der Einsatz der dialkenylierten Sulfonamide erfolgte in den zuvor untersuchten C-H-Aktivierungsmethoden. N-Allyl-N-phenylethensulfonamid (3) konnte erfolgreich in der DHR und HECK Reaktion funktionalisiert werden. Hierbei erfolgte eine methodenspezifische Kupplung in Abh{\"a}ngigkeit von der Elektronendichte der entsprechenden Alkenyl-Gruppe. Die DHR f{\"u}hrte zur selektiven Arylierung der Vinyl-Gruppe und die HECK Reaktion zur Arylierung an der Allyl-Gruppe. Gemischte Produkte wurden nicht erhalten. F{\"u}r die weiteren Diolefine wurde komplexe Produktgemische erhalten. Des Weiteren wurden die Diolefine in der Ringschlussmetathese untersucht und die entsprechenden Sultame in sehr guten Ausbeuten erhalten. Die Verwendung der Sultame in der C-H-Aktivierung war erfolglos. Es wird vermutet, dass f{\"u}r diese zweifachsubstituierten Sulfonamide die vorhandenen Reaktionsbedingungen optimiert werden m{\"u}ssen. Abschließend wurden verschiedene, enantiomerenreine Olefine ausgehend von Levoglucosenon dargestellt. Hierf{\"u}r wurde Levoglucosenon zun{\"a}chst mit einem Allyl- und 3-Butenylgrignard Reagenz umgesetzt. Die entsprechenden Produkte wurden in moderaten Ausbeuten erhalten. Eine weitere Methode begann mit der Reduktion von Levoglucosenon zum Levoglucosenol. Dieser Alkohol wurde mit Allylbromid erfolgreich verethert. Neben der Untersuchungen zur Ethersynthese, erfolgte die Veresterung von Levoglucosenol mit verschiedenen Sulfonylchloriden zu den entsprechenden Sulfons{\"a}ureestern. Diese Olefine wurden in einer Dominometathesereaktion untersucht. Ausgehend vom Allyllevoglucosenylether erfolgte die Darstellung eines Dihydrofurans.},
  language  = {de}
}
@phdthesis{Hoernke2011,
  author    = {H{\"o}rnke, Maria},
  title     = {ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces},
  address   = {Potsdam},
  pages     = {107, XXI S.},
  year      = {2011},
  language  = {en}
}
@phdthesis{Janietz2002,
  author    = {Janietz, Silvia},
  title     = {Zusammnenh{\"a}nge zwischen Struktur, elektrochemischem Redoxverhalten und dem Einsatz von organischen Halbleitern in der Elektronik},
  pages     = {78 S., Anh.},
  year      = {2002},
  language  = {de}
}
@phdthesis{Utecht2015,
  author    = {Utecht, Manuel Martin},
  title     = {Zur Optimierung und dem Auslesen molekularer Schalter},
  school      = {Universit{\"a}t Potsdam},
  pages     = {143},
  year      = {2015},
  language  = {de}
}
@phdthesis{Priester1999,
  author    = {Priester, Torsten},
  title     = {Zur L{\"o}sung eines thermodynamischen Ph{\"a}nomens der Adsorption amphiphiler Stoffe an fluiden Phasengrenzfl{\"a}chen : die lineare Abh{\"a}ngigkeit der Gleichgewichtsoberfl{\"a}chenspannung vom Logarithmus der Volumenkonzentration},
  series = {UFO Dissertation},
  volume    = {372},
  journal   = {UFO Dissertation},
  publisher = {UFO Atelier f{\"u}r Gestaltung und Verl.},
  address   = {Allensbach},
  isbn      = {3-930803-71-2},
  pages     = {131 S. : graph. Darst.},
  year      = {1999},
  language  = {de}
}
@phdthesis{Fandrich2009,
  author    = {Fandrich, Nick},
  title     = {Zur Charakterisierung von amphiphilen Blockcopolymeren aus N-Vinylpryrrolidon und Vinylacetat},
  address   = {Potsdam},
  pages     = {172 S.},
  year      = {2009},
  language  = {de}
}
@phdthesis{Schilde1992,
  author    = {Schilde, Uwe},
  title     = {Zur Abtrennung von Oxoanionen mittels chelatbildender Ionenaustauscher},
  pages     = {III, 181 Bl. : graph. Darst. + Thesen (1 Ex.)},
  year      = {1992},
  language  = {de}
}
@phdthesis{Grobosch1997,
  author    = {Grobosch, Thomas},
  title     = {Zur Abtrennung von Arsen und anderen Schwermetallen mit Ionenaustauschern und impr{\"a}gnierten Adsorberpolymeren},
  address   = {Potsdam},
  pages     = {125 S. : graph. Darst.},
  year      = {1997},
  language  = {de}
}
@phdthesis{Kraudelt1997,
  author    = {Kraudelt, Heide},
  title     = {Zur Abtrennung komplexer Anionen mit dem chelatbildenden Ionenaustauscher Wofatit MK 51},
  address   = {Potsdam},
  pages     = {99 S. : graph. Darst.},
  year      = {1997},
  language  = {de}
}
@phdthesis{Ermeydan2014,
  author    = {Ermeydan, Mahmut Ali},
  title     = {Wood cell wall modification with hydrophobic molecules},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71325},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Wood is used for many applications because of its excellent mechanical properties, relative abundance and as it is a renewable resource. However, its wider utilization as an engineering material is limited because it swells and shrinks upon moisture changes and is susceptible to degradation by microorganisms and/or insects. Chemical modifications of wood have been shown to improve dimensional stability, water repellence and/or durability, thus increasing potential service-life of wood materials. However current treatments are limited because it is difficult to introduce and fix such modifications deep inside the tissue and cell wall. Within the scope of this thesis, novel chemical modification methods of wood cell walls were developed to improve both dimensional stability and water repellence of wood material. These methods were partly inspired by the heartwood formation in living trees, a process, that for some species results in an insertion of hydrophobic chemical substances into the cell walls of already dead wood cells, In the first part of this thesis a chemistry to modify wood cell walls was used, which was inspired by the natural process of heartwood formation. Commercially available hydrophobic flavonoid molecules were effectively inserted in the cell walls of spruce, a softwood species with low natural durability, after a tosylation treatment to obtain "artificial heartwood". Flavonoid inserted cell walls show a reduced moisture absorption, resulting in better dimensional stability, water repellency and increased hardness. This approach was quite different compared to established modifications which mainly address hydroxyl groups of cell wall polymers with hydrophilic substances. In the second part of the work in-situ styrene polymerization inside the tosylated cell walls was studied. It is known that there is a weak adhesion between hydrophobic polymers and hydrophilic cell wall components. The hydrophobic styrene monomers were inserted into the tosylated wood cell walls for further polymerization to form polystyrene in the cell walls, which increased the dimensional stability of the bulk wood material and reduced water uptake of the cell walls considerably when compared to controls. In the third part of the work, grafting of another hydrophobic and also biodegradable polymer, poly(ɛ-caprolactone) in the wood cell walls by ring opening polymerization of ɛ-caprolactone was studied at mild temperatures. Results indicated that polycaprolactone attached into the cell walls, caused permanent swelling of the cell walls up to 5\%. Dimensional stability of the bulk wood material increased 40\% and water absorption reduced more than 35\%. A fully biodegradable and hydrophobized wood material was obtained with this method which reduces disposal problem of the modified wood materials and has improved properties to extend the material's service-life. Starting from a bio-inspired approach which showed great promise as an alternative to standard cell wall modifications we showed the possibility of inserting hydrophobic molecules in the cell walls and supported this fact with in-situ styrene and ɛ-caprolactone polymerization into the cell walls. It was shown in this thesis that despite the extensive knowledge and long history of using wood as a material there is still room for novel chemical modifications which could have a high impact on improving wood properties.},
  language  = {en}
}
@phdthesis{TocaHerrara1999,
  author    = {Toca-Herrara, Jos{\´e} Luis = Herrera},
  title     = {Wechselwirkungskr{\"a}fte und Struktur in Phospholipid-Schaumfilmen},
  address   = {Potsdam},
  pages     = {104 Bl. : graph. Darst.},
  year      = {1999},
  language  = {de}
}
@phdthesis{Delajon2005,
  author    = {Delajon, Christophe Bernard},
  title     = {Wechselwirkung von Lipidmembranen mit Polyelektrolytmultischichten},
  address   = {Potsdam},
  pages     = {99 S. : graph. Darst.},
  year      = {2005},
  language  = {de}
}
@phdthesis{FortesMartin2023,
  author    = {Fortes Mart{\´i}n, Rebeca},
  title     = {Water-in-oil microemulsions as soft-templates to mediate nanoparticle interfacial assembly into hybrid nanostructures},
  doi       = {10.25932/publishup-57180},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571801},
  school      = {Universit{\"a}t Potsdam},
  pages     = {119},
  year      = {2023},
  abstract  = {Hybrid nanomaterials offer the combination of individual properties of different types of nanoparticles. Some strategies for the development of new nanostructures in larger scale rely on the self-assembly of nanoparticles as a bottom-up approach. The use of templates provides ordered assemblies in defined patterns. In a typical soft-template, nanoparticles and other surface-active agents are incorporated into non-miscible liquids. The resulting self-organized dispersions will mediate nanoparticle interactions to control the subsequent self-assembly. Especially interactions between nanoparticles of very different dispersibility and functionality can be directed at a liquid-liquid interface. In this project, water-in-oil microemulsions were formulated from quasi-ternary mixtures with Aerosol-OT as surfactant. Oleyl-capped superparamagnetic iron oxide and/or silver nanoparticles were incorporated in the continuous organic phase, while polyethyleneimine-stabilized gold nanoparticles were confined in the dispersed water droplets. Each type of nanoparticle can modulate the surfactant film and the inter-droplet interactions in diverse ways, and their combination causes synergistic effects. Interfacial assemblies of nanoparticles resulted after phase-separation. On one hand, from a biphasic Winsor type II system at low surfactant concentration, drop-casting of the upper phase afforded thin films of ordered nanoparticles in filament-like networks. Detailed characterization proved that this templated assembly over a surface is based on the controlled clustering of nanoparticles and the elongation of the microemulsion droplets. This process offers versatility to use different nanoparticle compositions by keeping the surface functionalization, in different solvents and over different surfaces. On the other hand, a magnetic heterocoagulate was formed at higher surfactant concentration, whose phase-transfer from oleic acid to water was possible with another auxiliary surfactant in ethanol-water mixture. When the original components were initially mixed under heating, defined oil-in-water, magnetic-responsive nanostructures were obtained, consisting on water-dispersible nanoparticle domains embedded by a matrix-shell of oil-dispersible nanoparticles. Herein, two different approaches were demonstrated to form diverse hybrid nanostructures from reverse microemulsions as self-organized dispersions of the same components. This shows that microemulsions are versatile soft-templates not only for the synthesis of nanoparticles, but also for their self-assembly, which suggest new approaches towards the production of new sophisticated nanomaterials in larger scale.},
  language  = {en}
}
@phdthesis{Heiden2018,
  author    = {Heiden, Sophia L.},
  title     = {Water at α-alumina surfaces},
  doi       = {10.25932/publishup-42636},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426366},
  school      = {Universit{\"a}t Potsdam},
  pages     = {124},
  year      = {2018},
  abstract  = {The (0001) surface of α-Al₂O₃ is the most stable surface cut under UHV conditions and was studied by many groups both theoretically and experimentally. Reaction barriers computed with GGA functionals are known to be underestimated. Based on an example reaction at the (0001) surface, this work seeks to improve this rate by applying a hybrid functional method and perturbation theory (LMP2) with an atomic orbital basis, rather than a plane wave basis. In addition to activation barriers, we calculate the stability and vibrational frequencies of water on the surface. Adsorption energies were compared to PW calculations and confirmed PBE+D2/PW stability results. Especially the vibrational frequencies with the B3LYP hybrid functional that have been calculated for the (0001) surface are in good agreement with experimental findings. Concerning the barriers and the reaction rate constant, the expectations are fully met. It could be shown that recalculation of the transition state leads to an increased barrier, and a decreased rate constant when hybrid functionals or LMP2 are applied. Furthermore, the molecular beam scattering of water on (0001) surface was studied. In a previous work by Hass the dissociation was studied by AIMD of molecularly adsorbed water, referring to an equilibrium situation. The experimental method to obtaining this is pinhole dosing. In contrast to this earlier work, the dissociation process of heavy water that is brought onto the surface from a molecular beam source was modeled in this work by periodic ab initio molecular dynamics simulations. This experimental method results in a non-equilibrium situation. The calculations with different surface and beam models allow us to understand the results of the non-equilibrium situation better. In contrast to a more equilibrium situation with pinhole dosing, this gives an increase in the dissociation probability, which could be explained and also understood mechanistically by those calculations. In this work good progress was made in understanding the (1120) surface of α-Al₂O₃ in contact with water in the low-coverage regime. This surface cut is the third most stable one under UHV conditions and has not been studied to a great extent yet. After optimization of the clean, defect free surface, the stability of different adsorbed species could be classified. One molecular minimum and several dissociated species could be detected. Starting from these, reaction rates for various surface reactions were evaluated. A dissociation reaction was shown to be very fast because the molecular minimum is relatively unstable, whereas diffusion reactions cover a wider range from fast to slow. In general, the (112‾0) surface appears to be much more reactive against water than the (0001) surface. In addition to reactivity, harmonic vibrational frequencies were determined for comparison with the findings of the experimental "Interfacial Molecular Spectroscopy" group from Fritz-Haber institute in Berlin. Especially the vibrational frequencies of OD species could be assigned to vibrations from experimental SFG spectra with very good agreement. Also, lattice vibrations were studied in close collaboration with the experimental partners. They perform SFG spectra at very low frequencies to get deep into the lattice vibration region. Correspondingly, a bigger slab model with greater expansion perpendicular to the surface was applied, considering more layers in the bulk. Also with the lattice vibrations we could obtain reasonably good agreement in terms of energy differences between the peaks.},
  language  = {en}
}
@phdthesis{Goedel1998,
  author    = {Goedel, Werner Andreas},
  title     = {Von Monoschichten verankerter Polymere zu freitragenden, gummielastischen Membranen},
  address   = {Potsdam},
  pages     = {Getr. Z{\"a}hlung},
  year      = {1998},
  language  = {de}
}
@phdthesis{Bomm2012,
  author    = {Bomm, Jana},
  title     = {Von Gold Plasmonen und Exzitonen : Synthese, Charakterisierung und Applikationen von Gold Nanopartikeln},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66402},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {In dieser Arbeit wurden sph{\"a}rische Gold Nanopartikel (NP) mit einem Durchmesser gr{\"o}ßer ~ 2 nm, Gold Quantenpunkte (QDs) mit einem Durchmesser kleiner ~ 2 nm sowie Gold Nanost{\"a}bchen (NRs) unterschiedlicher L{\"a}nge hergestellt und optisch charakterisiert. Zudem wurden zwei neue Synthesevarianten f{\"u}r die Herstellung thermosensitiver Gold QDs entwickelt werden. Sph{\"a}rische Gold NP zeigen eine Plasmonenbande bei ~ 520 nm, die auf die kollektive Oszillation von Elektronen zur{\"u}ckzuf{\"u}hren ist. Gold NRs weisen aufgrund ihrer anisotropen Form zwei Plasmonenbanden auf, eine transversale Plasmonenbande bei ~ 520 nm und eine longitudinale Plasmonenbande, die vom L{\"a}nge-zu-Durchmesser-Verh{\"a}ltnis der Gold NRs abh{\"a}ngig ist. Gold QDs besitzen keine Plasmonenbande, da ihre Elektronen Quantenbeschr{\"a}nkungen unterliegen. Gold QDs zeigen jedoch aufgrund diskreter Energieniveaus und einer Bandl{\"u}cke Photolumineszenz (PL). Die synthetisierten Gold QDs besitzen eine Breitbandlumineszenz im Bereich von ~ 500-800 nm, wobei die Lumineszenz-eigenschaften (Emissionspeak, Quantenausbeute, Lebenszeiten) stark von den Herstellungs-bedingungen und den Oberfl{\"a}chenliganden abh{\"a}ngen. Die PL in Gold QDs ist ein sehr komplexes Ph{\"a}nomen und r{\"u}hrt vermutlich von Singulett- und Triplett-Zust{\"a}nden her. Gold NRs und Gold QDs konnten in verschiedene Polymere wie bspw. Cellulosetriacetat eingearbeitet werden. Polymernanokomposite mit Gold NRs wurden erstmals unter definierten Bedingungen mechanisch gezogen, um Filme mit optisch anisotropen (richtungsabh{\"a}ngigen) Eigenschaften zu erhalten. Zudem wurde das Temperaturverhalten von Gold NRs und Gold QDs untersucht. Es konnte gezeigt werden, dass eine lokale Variation der Gr{\"o}ße und Form von Gold NRs in Polymernanokompositen durch Temperaturerh{\"o}hung auf 225-250 °C erzielt werden kann. Es zeigte sich, dass die PL der Gold QDs stark temperaturabh{\"a}ngig ist, wodurch die PL QY der Proben beim Abk{\"u}hlen (-7 °C) auf knapp 30 \% verdoppelt und beim Erhitzen auf 70 °C nahezu vollst{\"a}ndig gel{\"o}scht werden konnte. Es konnte demonstriert werden, dass die L{\"a}nge der Alkylkette des Oberfl{\"a}chenliganden einen Einfluss auf die Temperaturstabilit{\"a}t der Gold QDs hat. Zudem wurden verschiedene neuartige und optisch anisotrope Sicherheitslabels mit Gold NRs sowie thermosensitive Sicherheitslabel mit Gold QDs entwickelt. Ebenso scheinen Gold NRs und QDs f{\"u}r die und die Optoelektronik (bspw. Datenspeicherung) und die Medizin (bspw. Krebsdiagnostik bzw. -therapie) von großem Interesse zu sein.},
  language  = {de}
}
@phdthesis{Halbruegge2024,
  author    = {Halbr{\"u}gge, Lena},
  title     = {Von der Curricularen Innovation zur Wissenschaftskommunikation},
  doi       = {10.25932/publishup-62035},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-620357},
  school      = {Universit{\"a}t Potsdam},
  pages     = {226},
  year      = {2024},
  abstract  = {Im Rahmen einer explorativen Entwicklung wurde in der vorliegenden Studie ein Konzept zur Wissenschaftskommunikation f{\"u}r ein Graduiertenkolleg, in dem an photochemischen Prozessen geforscht wird, erstellt und anschließend evaluiert. Der Grund daf{\"u}r ist die immer st{\"a}rker wachsende Forderung nach Wissenschaftskommunikation seitens der Politik. Es wird dar{\"u}ber hinaus gefordert, dass die Kommunikation der eigenen Forschung in Zukunft integrativer Bestandteil des wissenschaftlichen Arbeitens wird. Um junge Wissenschaftler bereits fr{\"u}hzeitig auf diese Aufgabe vorzubereiten, wird Wissenschaftskommunikation auch in Forschungsverb{\"u}nden realisiert. Aus diesem Grund wurde in einer Vorstudie untersucht, welche Anforderungen an ein Konzept zur Wissenschaftskommunikation im Rahmen eines Forschungsverbundes gestellt werden, indem die Einstellung der Doktoranden zur Wissenschaftskommunikation sowie ihre Kommunikationsf{\"a}higkeiten anhand eines geschlossenen Fragebogens evaluiert wurden. Dar{\"u}ber hinaus wurden aus den Daten Wissenschaftskommunikationstypen abgeleitet. Auf Grundlage der Ergebnisse wurden unterschiedliche Wissenschaftskommunikationsmaßnahmen entwickelt, die sich in der Konzeption, den Rezipienten, sowie der Form der Kommunikation und den Inhalten unterscheiden. Im Rahmen dieser Entwicklung wurde eine Lerneinheit mit Bezug auf die Inhalte des Graduiertenkollegs, bestehend aus einem Lehr-Lern-Experiment und den dazugeh{\"o}rigen Begleitmaterialien, konzipiert. Anschließend wurde die Lerneinheit in eine der Wissenschaftskommunikationsmaßnahmen integriert. Je nach Anforderung an die Doktoranden, wurden die Maßnahmen durch vorbereitende Workshops erg{\"a}nzt. Durch einen halboffenen Pre-Post-Fragebogen wurde der Einfluss der Wissenschaftskommunikationsmaßnahmen und der dazugeh{\"o}rigen Workshops auf die Selbstwirksamkeit der Doktoranden evaluiert, um R{\"u}ckschl{\"u}sse darauf zu ziehen, wie sich die Wahrnehmung der eigenen Kommunikationsf{\"a}higkeiten durch die Interventionen ver{\"a}ndert. Die Ergebnisse deuten darauf hin, dass die einzelnen Wissenschaftskommunikationsmaßnahmen die verschiedenen Typen in unterschiedlicher Weise beeinflussen. Es ist anzunehmen, dass es abh{\"a}ngig von der eigenen Einsch{\"a}tzung der Kommunikationsf{\"a}higkeit unterschiedliche Bed{\"u}rfnisse der F{\"o}rderung gibt, die durch dedizierte Wissenschaftskommunikationsmaßnahmen ber{\"u}cksichtigt werden k{\"o}nnen. Auf dieser Grundlage werden erste Ans{\"a}tze f{\"u}r eine allgemeing{\"u}ltige Strategie vorgeschlagen, die die individuellen F{\"a}higkeiten zur Wissenschaftskommunikation in einem naturwissenschaftlichen Forschungsverbund f{\"o}rdert.},
  language  = {de}
}
@phdthesis{Riemer2014,
  author    = {Riemer, Martin},
  title     = {Vom Phenol zum Naturstoff : Entwicklung nachhaltiger Mikrowellen-vermittelter SUZUKI-MIYAURA-Kupplungen und Tandem-Reaktionen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72525},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Ziel dieser Arbeit war die Entwicklung von Methoden zur Synthese von auf Phenol basierenden Naturstoffen. Insbesondere wurde bei der Methodenentwicklung die Nachhaltigkeit in den Vordergrund ger{\"u}ckt. Dies bedeutet, dass durch die Zusammenfassung mehrerer Syntheseschritte zu einem (Tandem-Reaktion) beispielsweise unn{\"o}tige Reaktionsschritte vermieden werden sollten. Ferner sollten im Sinne der Nachhaltigkeit m{\"o}glichst ungiftige Reagenzien und L{\"o}sungmittel verwendet werden, ebenso wie mehrfach wiederverwertbare Katalysatoren zum Einsatz kommen. Im Rahmen dieser Arbeit wurden Methoden zum Aufbau von Biphenolen mittels Pd/C-katalysierten Suzuki-Miyaura-Kupplungen entwickelt. Diese Methoden sind insofern {\"a}ußerst effizient, da der ansonsten gebr{\"a}uchliche Syntheseweg {\"u}ber drei Reaktionsschritte somit auf lediglich eine Reaktionsstufe reduziert wurde. Weiterhin wurden die Reaktionsbedingungen so gestaltet, dass einfaches Wasser als vollkommen ungiftiges L{\"o}sungsmittel verwendet werden konnte. Des Weiteren wurde f{\"u}r diese Reaktionen ein Katalysator gew{\"a}hlt, der einfach durch Filtration vom Reaktionsgemisch abgetrennt und f{\"u}r weitere Reaktionen mehrfach wiederverwendet werden konnte. Dar{\"u}ber hinaus konnte durch die Synthese von mehr als 100 Verbindungen die breite Anwendbarkeit der Methoden aufgezeigt werden. Mit den entwickelten Methoden konnten 14 Naturstoffe - z. T. erstmals - synthetisiert werden. Derartige Stoffe werden u. a. von den {\"o}konomisch bedeutenden Kernobstgew{\"a}chsen ({\"A}pfeln, Birnen) als Abwehrmittel gegen{\"u}ber Sch{\"a}dlingen erzeugt. Folglich konnte mit Hilfe dieser Methoden ein Syntheseweg f{\"u}r potentielle Pflanzenschutzmittel entwickelt werden. Im zweiten Teil dieser Arbeit wurde ein Zugang zu den sich ebenfalls vom Phenol ableitenden Chromanonen, Chromonen und Cumarinen untersucht. Bei diesen Untersuchungen konnte durch die Entwicklung zweier neuer Tandem-Reaktionen ein nachhaltiger und stufen{\"o}konomischer Syntheseweg zur Darstellung substituierter Benzo(dihydro)pyrone aufgezeigt werden. Durch die erstmalige Kombination der Claisen-Umlagerung mit einer Oxa-Michael-Addition bzw. konjugierten-Addition wurden zwei vollkommen atom{\"o}konomische Reaktionen miteinander verkn{\"u}pft und somit eine {\"u}beraus effiente Synthese von allyl- bzw. prenylsubstituierten Chromanonen und Chromonen erm{\"o}glicht. Ferner konnten durch die Anwendung einer Claisen-Umlagerung-Wittig-Laktonisierungs-Reaktion allyl- bzw. prenylsubstituierte Cumarine erhalten werden. Herausragendes Merkmal dieser Methoden war, dass in nur einem Schritt der jeweilige Naturstoffgrundk{\"o}rper aufgebaut und eine lipophile Seitenkette generiert werden konnte. Die Entwicklung dieser Methoden ist von hohem pharmazeutischem Stellenwert, da auf diesen Wegen Verbindungen synthetisiert werden k{\"o}nnen, die zum einem {\"u}ber das notwendige pharmakologische Grundger{\"u}st verf{\"u}gen und zum anderen {\"u}ber eine Seitenkette, welche die Aufnahmef{\"a}higkeit und damit die Wirksamkeit im Organismus betr{\"a}chtlich erh{\"o}ht. Insgesamt konnten mittels der entwickelten Methoden 15 Chromanon-, Chromon- und Cumarin-Naturstoffe z. T. erstmals synthetisiert werden.},
  language  = {de}
}
@phdthesis{SchulteOsseili2019,
  author    = {Schulte-Osseili, Christine},
  title     = {Vom Monomer zum Glykopolymer},
  doi       = {10.25932/publishup-43216},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432169},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 149},
  year      = {2019},
  abstract  = {Glykopolymere sind synthetische und nat{\"u}rlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich f{\"u}r viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen erm{\"o}glicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kosteng{\"u}nstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden {\"u}ber ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in w{\"a}ssriger L{\"o}sung untersucht. Die Polymere formten in w{\"a}ssriger L{\"o}sung Mizellen, bei denen der Zuckerblock an der Oberfl{\"a}che der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberfl{\"a}chenbeschichtung {\"u}ber „Grafting from" mit SI-ATRP oder {\"u}ber „Grafting to" auf verschiedene Oberfl{\"a}chen gebunden. Durch die glykopolymerbschichteten Oberfl{\"a}chen konnte die Glykan Protein Wechselwirkung {\"u}ber spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsst{\"a}rke untersucht. Die synthetisierten Glykopolymere k{\"o}nnten durch Austausch der Glykaneinheit f{\"u}r andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die biovertr{\"a}glichen Glykopolymere w{\"a}ren alternativen f{\"u}r den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den K{\"o}rper. Außerdem k{\"o}nnten die funktionalisierten Oberfl{\"a}chen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, k{\"o}nnten als antiadsorptive Oberfl{\"a}chenbeschichtung z.B. in der Zellbiologie eingesetzt werden.},
  language  = {de}
}
@phdthesis{Xiong2018,
  author    = {Xiong, Tao},
  title     = {Vibrationally resolved absorption, emission, resonance Raman and photoelectron spectra of selected organic molecules, associated radicals and cations},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418105},
  school      = {Universit{\"a}t Potsdam},
  pages     = {iv, 100},
  year      = {2018},
  abstract  = {Time-dependent correlation function based methods to study optical spectroscopy involving electronic transitions can be traced back to the work of Heller and coworkers. This intuitive methodology can be expected to be computationally efficient and is applied in the current work to study the vibronic absorption, emission, and resonance Raman spectra of selected organic molecules. Besides, the "non-standard" application of this approach to photoionization processes is also explored. The application section consists of four chapters as described below. In Chapter 4, the molar absorptivities and vibronic absorption/emission spectra of perylene and several of its N-substituted derivatives are investigated. By systematically varying the number and position of N atoms, it is shown that the presence of nitrogen heteroatoms has a negligible effect on the molecular structure and geometric distortions upon electronic transitions, while spectral properties are more sensitive: In particular the number of N atoms is important while their position is less decisive. Thus, N-substitution can be used to fine-tune the optical properties of perylene-based molecules. In Chapter 5, the same methods are applied to study the vibronic absorption/emission and resonance Raman spectra of a newly synthesized donor-acceptor type molecule. The simulated absorption/emission spectra agree fairly well with experimental data, with discrepancies being attributed to solvent effects. Possible modes which may dominate the fine-structure in the vibronic spectra are proposed by analyzing the correlation function with the aid of Raman and resonance Raman spectra. In the next two chapters, besides the above types of spectra, the methods are extended to study photoelectron spectra of several small diamondoid-related systems (molecules, radicals, and cations). Comparison of the photoelectron spectra with available experimental data suggests that the correlation function based approach can describe ionization processes reasonably well. Some of these systems, cationic species in particular, exhibit somewhat peculiar optical behavior, which presents them as possible candidates for functional devices. Correlation function based methods in a more general sense can be very versatile. In fact, besides the above radiative processes, formulas for non-radiative processes such as internal conversion have been derived in literature. Further implementation of the available methods is among our next goals.},
  language  = {en}
}
@phdthesis{Vazhappilly2008,
  author    = {Vazhappilly, Tijo Joseph},
  title     = {Vibrationally enhanced associative photodesorption of H2 (D2) from Ru(0001) : quantum and classical approaches},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-19056},
  school      = {Universit{\"a}t Potsdam},
  year      = {2008},
  abstract  = {Nowadays, reactions on surfaces are attaining great scientific interest because of their diverse applications. Some well known examples are production of ammonia on metal surfaces for fertilizers and reduction of poisonous gases from automobiles using catalytic converters. More recently, also photoinduced reactions at surfaces, useful, \textit{e.g.}, for photocatalysis, were studied in detail. Often, very short laser pulses are used for this purpose. Some of these reactions are occurring on femtosecond (1 fs=\$10^{-15}\$ s) time scales since the motion of atoms (which leads to bond breaking and new bond formation) belongs to this time range. This thesis investigates the femtosecond laser induced associative photodesorption of hydrogen, H\$_2\$, and deuterium, D\$_2\$, from a ruthenium metal surface. Many interesting features of this reaction were explored by experimentalists: (i) a huge isotope effect in the desorption probability of H\$_2\$ and D\$_2\$, (ii) the desorption yield increases non-linearly with the applied visible (vis) laser fluence, and (iii) unequal energy partitioning to different degrees of freedom. These peculiarities are due to the fact that an ultrashort vis pulse creates hot electrons in the metal. These hot electrons then transfer energy to adsorbate vibrations which leads to desorption. In fact, adsorbate vibrations are strongly coupled to metal electrons, \textit{i.e.}, through non-adiabatic couplings. This means that, surfaces introduce additional channels for energy exchange which makes the control of surface reactions more difficult than the control of reactions in the gas phase. In fact, the quantum yield of surface photochemical reactions is often notoriously small. One of the goals of the present thesis is to suggest, on the basis of theoretical simulations, strategies to control/enhance the photodesorption yield of H\$_2\$ and D\$_2\$ from Ru(0001). For this purpose, we suggest a \textit{hybrid scheme} to control the reaction, where the adsorbate vibrations are initially excited by an infrared (IR) pulse, prior to the vis pulse. Both \textit{adiabatic} and \textit{non-adiabatic} representations for photoinduced desorption problems are employed here. The \textit{adiabatic} representation is realized within the classical picture using Molecular Dynamics (MD) with electronic frictions. In a quantum mechanical description, \textit{non-adiabatic} representations are employed within open-system density matrix theory. The time evolution of the desorption process is studied using a two-mode reduced dimensionality model with one vibrational coordinate and one translational coordinate of the adsorbate. The ground and excited electronic state potentials, and dipole function for the IR excitation are taken from first principles. The IR driven vibrational excitation of adsorbate modes with moderate efficiency is achieved by (modified) \$\pi\$-pulses or/and optimal control theory. The fluence dependence of the desorption reaction is computed by including the electronic temperature of the metal calculated from the two-temperature model. Here, our theoretical results show a good agreement with experimental and previous theoretical findings. We then employed the IR+vis strategy in both models. Here, we found that vibrational excitation indeed promotes the desorption of hydrogen and deuterium. To summarize, we conclude that photocontrol of this surface reaction can be achieved by our IR+vis scheme.},
  language  = {en}
}
@phdthesis{Hainich1992,
  author    = {Hainich, Kerstin},
  title     = {Verwendung von Metallen unter {\"o}kologischen Gesichtspunkten - Materialien f{\"u}r den Chemieunterricht und Bereitstellung fachwissenschaftlicher (chemischer) Kenntnisse},
  pages     = {Getr. Z{\"a}hlung},
  year      = {1992},
  language  = {de}
}
@phdthesis{RojasCarillo2012,
  author    = {Rojas Carillo, Oscar Mario},
  title     = {Versatile uses of halogen-free Ionic Liquids for the formulation of non-aqueous microemulsion and synthesis of gold nanoparticles},
  address   = {Potsdam},
  pages     = {93, XXVI S.},
  year      = {2012},
  language  = {en}
}
@phdthesis{Kuechler1995,
  author    = {K{\"u}chler, Thoralf},
  title     = {Verhalten von Tensiden und ihre Auswirkungen auf die Mobilit{\"a}t organischer Schadstoffe in sorptionsschwachen Sandb{\"o}den},
  pages     = {139 S.},
  year      = {1995},
  language  = {de}
}
@phdthesis{Kumru2018,
  author    = {Kumru, Baris},
  title     = {Utilization of graphitic carbon nitride in dispersed media},
  doi       = {10.25932/publishup-42733},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427339},
  school      = {Universit{\"a}t Potsdam},
  pages     = {III, 190},
  year      = {2018},
  abstract  = {Utilization of sunlight for energy harvesting has been foreseen as sustainable replacement for fossil fuels, which would also eliminate side effects arising from fossil fuel consumption such as drastic increase of CO2 in Earth atmosphere. Semiconductor materials can be implemented for energy harvesting, and design of ideal energy harvesting devices relies on effective semiconductor with low recombination rate, ease of processing, stability over long period, non-toxicity and synthesis from abundant sources. Aforementioned criteria have attracted broad interest for graphitic carbon nitride (g-CN) materials, metal-free semiconductor which can be synthesized from low cost and abundant precursors. Furthermore, physical properties such as band gap, surface area and absorption can be tuned. g-CN was investigated as heterogeneous catalyst, with diversified applications from water splitting to CO2 reduction and organic coupling reactions. However, low dispersibility of g-CN in water and organic solvents was an obstacle for future improvements. Tissue engineering aims to mimic natural tissues mechanically and biologically, so that synthetic materials can replace natural ones in future. Hydrogels are crosslinked networks with high water content, therefore are prime candidates for tissue engineering. However, the first requirement is synthesis of hydrogels with mechanical properties that are matching to natural tissues. Among different approaches for reinforcement, nanocomposite reinforcement is highly promising. This thesis aims to investigate aqueous and organic dispersions of g-CN materials. Aqueous g-CN dispersions were utilized for visible light induced hydrogel synthesis, where g-CN acts as reinforcer and photoinitiator. Varieties of methodologies were presented for enhancing g-CN dispersibility, from co-solvent method to prepolymer formation, and it was shown that hydrogels with diversified mechanical properties (from skin-like to cartilage-like) are accessible via g-CN utilization. One pot photografting method was introduced for functionalization of g-CN surface which provides functional groups towards enhanced dispersibility in aqueous and organic media. Grafting vinyl thiazole groups yields stable additive-free organodispersions of g-CN which are electrostatically stabilized with increased photophysical properties. Colloidal stability of organic systems provides transparent g-CN coatings and printing g-CN from commercial inkjet printers. Overall, application of g-CN in dispersed media is highly promising, and variety of materials can be accessible via utilization of g-CN and visible light with simple chemicals and synthetic conditions. g-CN in dispersed media will bridge emerging research areas from tissue engineering to energy harvesting in near future.},
  language  = {en}
}
@phdthesis{Klier2016,
  author    = {Klier, Dennis Tobias},
  title     = {Upconversion luminescence in Er-codoped NaYF4 nanoparticles},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98486},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 89},
  year      = {2016},
  abstract  = {In the context of an increasing population of aging people and a shift of medical paradigm towards an individualized medicine in health care, nanostructured lanthanides doped sodium yttrium fluoride (NaYF4) represents an exciting class of upconversion nanomaterials (UCNM) which are suitable to bring forward developments in biomedicine and -biodetection. Despite the fact that among various fluoride based upconversion (UC) phosphors lanthanide doped NaYF4 is one of the most studied upconversion nanomaterial, many open questions are still remaining concerning the interplay of the population routes of sensitizer and activator electronic states involved in different luminescence upconversion photophysics as well as the role of phonon coupling. The collective work aims to explore a detailed understanding of the upconversion mechanism in nanoscaled NaYF4 based materials co-doped with several lanthanides, e.g. Yb3+ and Er3+ as the "standard" type upconversion nanoparticles (UCNP) up to advanced UCNP with Gd3+ and Nd3+. Especially the impact of the crystal lattice structure as well as the resulting lattice phonons on the upconversion luminescence was investigated in detail based on different mixtures of cubic and hexagonal NaYF4 nanoscaled crystals. Three synthesis methods, depending on the attempt of the respective central spectroscopic questions, could be accomplished in the following work. NaYF4 based upconversion nanoparticles doped with several combination of lanthanides (Yb3+, Er3+, Gd3+ and Nd3+) were synthesized successfully using a hydrothermal synthesis method under mild conditions as well as a co-precipitation and a high temperature co-precipitation technique. Structural information were gathered by means of X-ray diffraction (XRD), electron microscopy (TEM), dynamic light scattering (DLS), Raman spectroscopy and inductively coupled plasma atomic emission spectrometry (ICP-OES). The results were discussed in detail with relation to the spectroscopic results. A variable spectroscopic setup was developed for multi parameter upconversion luminescence studies at various temperature 4 K to 328 K. Especially, the study of the thermal behavior of upconversion luminescence as well as time resolved area normalized emission spectra were a prerequisite for the detailed understanding of intramolecular deactivation processes, structural changes upon annealing or Gd3+ concentration, and the role of phonon coupling for the upconversion efficiency. Subsequently it became possible to synthesize UCNP with tailored upconversion luminescence properties. In the end, the potential of UCNP for life science application should be enunciated in context of current needs and improvements of a nanomaterial based optical sensors, whereas the "standard" UCNP design was attuned according to the special conditions in the biological matrix. In terms of a better biocompatibility due to a lower impact on biological tissue and higher penetrability for the excitation light. The first step into this direction was to use Nd3+ ions as a new sensitizer in tridoped NaYF4 based UCNP, whereas the achieved absolute and relative temperature sensitivity is comparable to other types of local temperature sensors in the literature.},
  language  = {en}
}
@phdthesis{Badetko2023,
  author    = {Badetko, Dominik},
  title     = {Untersuchungen zur Totalsynthese von Arylnaphthalen-Lignanen mittels Photo-Dehydro-Diels-Alder-Reaktion als Schl{\"u}sselschritt},
  doi       = {10.25932/publishup-59306},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-593065},
  school      = {Universit{\"a}t Potsdam},
  pages     = {III, 428},
  year      = {2023},
  abstract  = {Im Rahmen dieser Dissertation wurden die erstmaligen Totalsynthesen der Arylnaphthalen-Lignane Alashinol D, Vitexdoin C, Vitrofolal E, Noralashinol C1 und Ternifoliuslignan E vorgestellt. Der Schl{\"u}sselschritt der entwickelten Methode, basiert auf einer regioselektiven intramolekularen Photo-Dehydro-Diels-Alder (PDDA)-Reaktion, die mittels UV-Strahlung im Durchflussreaktor durchgef{\"u}hrt wurde. Bei der Synthese der PDDA-Vorl{\"a}ufer (Diarylsuberate) wurde eine Synthesestrategie nach dem Baukastenprinzip verfolgt. Diese erm{\"o}glicht die Darstellung asymmetrischer komplexer Systeme aus nur wenigen Grundbausteinen und die Totalsynthese einer Vielzahl an Lignanen. In systematischen Voruntersuchungen konnte zudem die klare {\"U}berlegenheit der intra- gegen{\"u}ber der intermolekularen PDDA-Reaktion aufgezeigt werden. Dabei stellte sich eine Verkn{\"u}pfung der beiden Arylpropiolester {\"u}ber einen Korks{\"a}ureb{\"u}gel, in para-Position, als besonders effizient heraus. Werden asymmetrisch substituierte Diarylsuberate, bei denen einer der endst{\"a}ndigen Estersubstituenten durch eine Trimethylsilyl-Gruppe oder ein Wasserstoffatom ersetzt wurde, verwendet, durchlaufen diese Systeme eine regioselektive Cyclisierung und als Hauptprodukt werden Naphthalenophane mit einem Methylester in 3-Position erhalten. Mit Hilfe von umfangreichen Experimenten zur Funktionalisierung der 4-Position, konnte zudem gezeigt werden, dass die Substitution der nucleophilen Cycloallen-Intermediate, w{\"a}hrend der PDDA-Reaktion, generell durch die Zugabe von N-Halogen-Succinimiden m{\"o}glich ist. In Anbetracht der geringen Ausbeuten haben diese intermolekularen Abfangreaktionen, jedoch keinen pr{\"a}parativen Nutzen f{\"u}r die Totalsynthesen von Lignanen. Mit dem Ziel die allgemeinen photochemischen Reaktionsbedingungen zu optimieren, wurde erstmalig die triplettsensibilisierte PDDA-Reaktion vorgestellt. Durch die Verwendung von Xanthon als Sensibilisator wurde der Einsatz von effizienteren UVA-Lichtquellen erm{\"o}glicht, wodurch die Gefahr einer Photozersetzung durch {\"U}berbestrahlung minimiert wurde. Im Vergleich zur direkten Anregung mit UVB-Strahlung, konnten die Ausbeuten mit indirekter Anregung durch einen Photokatalysator signifikant gesteigert werden. Die grundlegenden Erkenntnisse und die entwickelten Synthesestrategien dieser Arbeit, k{\"o}nnen dazu beitragen zuk{\"u}nftig die Erschließung neuer pharmakologisch interessanter Lignane voranzutreiben. 1 Bisher ist nur die semisynthetische Darstellung von Noralashinol C ausgehend von Hydroxymatairesinol literaturbekannt.},
  language  = {de}
}
@phdthesis{Czarnecki2021,
  author    = {Czarnecki, Maciej},
  title     = {Untersuchungen zur Synthese von (1,7)-Naphthalenophanen {\"u}ber eine Dehydro-DIELS-ALDER-Reaktion als Schl{\"u}sselschritt},
  doi       = {10.25932/publishup-50867},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-508670},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vii, 227, XXX},
  year      = {2021},
  abstract  = {Die vorliegende Dissertation behandelt drei thematische Schwerpunkte. Im Ergebnisteil steht die chemische Synthese von sogenannten (1,7)-Naphthalenophanen im Vordergrund, die zur Substanzklasse von Cyclophanen geh{\"o}ren. W{\"a}hrend zahlreiche Synthesemethoden Strategien zum Aufbau von Ringsystemen (wie z. B. von Naphthalenophanen) verfolgen, die Teil einer bereits existierenden aromatischen Struktur der Ausgangsverbindung sind, nutzen nur wenige Ans{\"a}tze Reaktionen, die einen Ringschluss zum gew{\"u}nschten Produkt erst im Zuge der Synthese etablieren. Eine Benzanellierung, die eine besondere Aufmerksamkeit im Arbeitskreis erfahren hat, ist die Dehydro-DIELS-ALDER-Reaktion (DDA-Reaktion). Im Rahmen dieser Arbeit konnte gezeigt werden, dass zw{\"o}lf ausgew{\"a}hlte (1,7)-Naphthalenophane, die teilweise ringgespannt und makrozyklisch aufgebaut waren, mithilfe einer photochemischen Variante der DDA-Reaktion (PDDA-Reaktion) zug{\"a}nglich gemacht werden k{\"o}nnen. Die Versuche, auf thermischem Wege (TDDA-Reaktion) (1,7)-Naphthalenophane herzustellen, misslangen. Die außergew{\"o}hnliche Reaktivit{\"a}t der Photoreaktanten konnte mithilfe quantenchemischer Berechnungen durch eine gefaltete Grundzustandsgeometrie erkl{\"a}rt werden. Dar{\"u}ber hinaus wurden Ringspannungen und strukturelle Spannungsindikatoren der relevanten Photoprodukte ermittelt und Trends in Abh{\"a}ngigkeit der Linkerl{\"a}nge in den NMR-Spektren der Zielverbindungen ermittelt sowie diskutiert. Zudem zeigte eine Variation am Chromophor (Acyl-, Carbons{\"a}ure- und Carbons{\"a}ureester) der Photoreaktanten bei der Bestrahlung in Dichlormethan eine vergleichbare Photokinetik und -reaktivit{\"a}t. Der zweite Abschnitt dieser Dissertation ist dem Design und der Entwicklung zweier Photoreaktoren f{\"u}r UV-Anwendungen im kontinuierlichen Durchfluss gewidmet, da photochemische Transformationen bekanntermaßen in ihrer Skalierbarkeit limitiert sind. Im ersten Prototyp konnten mittels effizienter Parallelschaltung mit bis zu drei UV-Lampen (𝜆𝜆 = 254, 310 und 355 nm) Produktmaterialmengen von bis zu n = 188 mmol anhand eines ausgew{\"a}hlten Fallbeispiels erreicht werden. Im konstruktionstechnisch stark vereinfachten zweiten Photoreaktor wurden alle quarzhaltigen Elemente gegen g{\"u}nstigeres PLEXIGLAS® ersetzt. Das Resultat waren identische Raum-Zeit-Ausbeuten in Bezug auf das zuvor gew{\"a}hlte Synthesebeispiel. Demnach bietet die UV-Photochemie im kontinuierlichen Durchfluss Vorteile gegen{\"u}ber der traditionellen Bestrahlung im Tauchreaktor. Hinsichtlich Reaktionszeit, Produktausbeuten und L{\"o}semittelverbrauch ist sie synthetisch weit {\"u}berlegen. Im letzten Abschnitt der Arbeit wurden diese Erkenntnisse genutzt, um biomedizinisch und pharmakologisch vielversprechende 1-Arylnaphthalen-Lignane mittels einer intramolekularen PDDA-Reaktion (IMPDDA-Reaktion) als Schl{\"u}sselschritt herzustellen. Hierzu wurden drei Konzepte erarbeitet und in der Totalsynthese von drei ausgew{\"a}hlten Zielstrukturen auf Basis des 1-Arylnaphthalengrundger{\"u}sts realisiert.},
  language  = {de}
}
@phdthesis{Niehus2007,
  author    = {Niehus, Christina},
  title     = {Untersuchungen zur Selektivit{\"a}t unterschiedlich substituierter Iminodiessigs{\"a}ure-Ionenaustauscher gegen{\"u}ber zweiwertigen Metallionen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13190},
  school      = {Universit{\"a}t Potsdam},
  year      = {2007},
  abstract  = {Zur selektiven Entfernung von Schwermetallen aus industriellen Abw{\"a}ssern und Prozessl{\"o}sungen der metallverarbeitenden Industrie werden synthetische metallkomplexierende funktionelle Polymere - mit Iminodiessigs{\"a}ure (IDE) als aktive Spezies - seit Jahren erfolgreich zur Eliminierung st{\"o}render Kationen eingesetzt. St{\"a}ndig steigende Anforderungen an die Qualit{\"a}t der aufzubereitenden W{\"a}sser verlangen nach leistungsf{\"a}higen Selektivaustauschern, die den Erhalt der Eigenschaften von Prozessl{\"o}sungen (z. B. pH-Wert, Salzgehalt) erm{\"o}glichen. Ziel der Untersuchungen war es, die strukturellen Matrixeinfl{\"u}sse auf Beladung, Kapazit{\"a}t, Selektivit{\"a}t und Kinetik durch Variation der Matrix und der experimentellen Bedingungen n{\"a}her zu untersuchen. Auf Basis einer monodispersen Erstsubstitution eines Styren-Divinylbenzen-Copolymerisates wurde durch gezielten Einbau funktioneller Gruppen - Synthese mit differenziertem Substitutionsgrad (TK/N 1-2) - versucht, systematisch den Einfluss des Substitutionsgrades der Matrix auf die Eigenschaften der Ionenaustauscher zu analysieren. Methodisch geordnet wurden zun{\"a}chst die Versuche nach dem Batch- und anschließend nach dem S{\"a}ulenverfahren durchgef{\"u}hrt und parallel dazu die Matrix charakterisiert. Das Verhalten der funktionellen Ankergruppen in Abh{\"a}ngigkeit vom pH-Wert der L{\"o}sung (pH-Bereich 2 - 5) wurde untersucht, der optimale Anreicherungs-pH-Wert, die maximale Beladung (Kapazit{\"a}t) und Selektivit{\"a}t der unterschiedlich substituierten Proben f{\"u}r die Schwermetall-Ionen Cu, Zn, Ni, Cd, Pb und Co ermittelt. Den statischen Versuchen folgten dynamische Untersuchungen im S{\"a}ulenverfahren. Ziel war die Ermittlung des Durchbruchverhaltens und der Durchbruchkapazit{\"a}t bei optimalem pH-Wert in Abh{\"a}ngigkeit vom Substitutionsgrad gegen{\"u}ber den Einzelmetallionen (Cu, Ni, Zn) und ausgew{\"a}hlten Paaren (Cu/Ni, Cu/Zn, Ni/Zn). Alle Ionenaustauscher wurden ausschließlich in der Ca-Form eingesetzt.},
  language  = {de}
}
@phdthesis{Wilken1998,
  author    = {Wilken, Ralph},
  title     = {Untersuchungen zur Oberfl{\"a}chenmodifizierung ausgew{\"a}hlter Modellpolymere durch VUV-Photolyse},
  pages     = {99, VIII Bl. : graph. Darst.},
  year      = {1998},
  language  = {de}
}
@phdthesis{Gerngross2014,
  author    = {Gerngroß, Maik},
  title     = {Untersuchungen zur Herstellung por{\"o}ser Materialien durch Acetalisierungsreaktionen},
  pages     = {152},
  year      = {2014},
  language  = {de}
}
@phdthesis{Kaspar1996,
  author    = {Kaspar, Harald},
  title     = {Untersuchungen zur Gleichgewichtsquellung polymerer Nanopartikel},
  pages     = {97 S.},
  year      = {1996},
  language  = {de}
}
@phdthesis{Schulze2019,
  author    = {Schulze, Tanja},
  title     = {Untersuchungen zur Entwicklung und Synthese neuartiger Gelenkst{\"a}be basierend auf Oligospiroketalen},
  school      = {Universit{\"a}t Potsdam},
  pages     = {174},
  year      = {2019},
  language  = {de}
}
@phdthesis{Roosterman1999,
  author    = {Roosterman, Dirk},
  title     = {Untersuchungen zur Agonisten-induzierten Internalisierung der Somatostatin-Rezeptoren},
  pages     = {122 Bl. : graph. Darst.},
  year      = {1999},
  language  = {de}
}
@phdthesis{Kuehn1996,
  author    = {K{\"u}hn, Ingolf},
  title     = {Untersuchungen zum Mechanismus der Teilchenbildung w{\"a}hrend der Emulsionspolymerisation},
  pages     = {101 S.},
  year      = {1996},
  language  = {de}
}
@phdthesis{Klaper2014,
  author    = {Klaper, Matthias},
  title     = {Untersuchungen zum intramolekularen Transfer von Singulettsauerstoff auf Acene und Alkene},
  school      = {Universit{\"a}t Potsdam},
  pages     = {118},
  year      = {2014},
  language  = {de}
}
@phdthesis{Klaper2013,
  author    = {Klaper, Matthias},
  title     = {Untersuchungen zum intramolekularen Transfer von Singulettsauerstoff auf Acene und Alkene},
  address   = {Potsdam},
  pages     = {118, A65 S.},
  year      = {2013},
  language  = {de}
}
@phdthesis{Lang2000,
  author    = {Lang, Jaqueline},
  title     = {Untersuchungen zu Synthese, Charakterisierung und Applikation von hochsubstituierten St{\"a}rkefetts{\"a}ureestern},
  pages     = {176 S.},
  year      = {2000},
  language  = {de}
}
@phdthesis{Bauch2019,
  author    = {Bauch, Marcel},
  title     = {Untersuchungen an neuartigen sauerstoffsubstituierten Donoren und Akzeptoren f{\"u}r Singulettsauerstoff},
  doi       = {10.25932/publishup-42514},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-425140},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VI, 196, xiv, A-27},
  year      = {2019},
  abstract  = {Im Verlauf dieser Arbeit wurden Aromaten wie Naphthaline und Anthracene mit Singulettsauerstoff, einer reaktiven Form des gew{\"o}hnlichen Sauerstoffs, zu sogenannten Endoperoxiden umgesetzt. Die hier eingesetzten Systeme wurden mit funktionellen Gruppen modifiziert, die {\"u}ber eine Sauerstoffbr{\"u}cke mit dem Aromaten verkn{\"u}pft sind. Die daraus entstandenen Endoperoxide sind meist besonders labil und konnten in dieser Arbeit isoliert und umfassend untersucht werden. Hierbei wurde zum einen das Reaktionsverhalten untersucht. Es konnte gezeigt werden, dass die Aromaten in Abh{\"a}ngigkeit ihrer funktionellen Gruppen unterschiedlich schnell mit Singulettsauerstoff reagieren. Die so ermittelten Reaktivit{\"a}ten wurden zus{\"a}tzlich durch theoretische Berechnungen gest{\"u}tzt. Die resultierenden Endoperoxide wurden unter verschiedenen Bedingungen wie erh{\"o}hter Temperatur oder einem sauren bzw. basischen Milieu auf ihre Stabilit{\"a}t hin untersucht. Dabei konnte gezeigt werden, dass die auf Naphthalinen basierenden Endoperoxiden den gebundenen Singulettsauerstoff in guten Ausbeuten oft schon bei sehr niedrigen Temperaturen (-40 bis 0 °C) freisetzen. Diese Verbindungen k{\"o}nnen daher als milde Quellen dieser reaktiven Sauerstoffspezies eingesetzt werden. Weiterhin konnten bei den Anthracenendoperoxiden Zerfallsmechanismen aufgekl{\"a}rt und andere reaktive Sauerstoffspezies wie Wasserstoffperoxid oder Pers{\"a}uren nachgewiesen werden. Zu den Modifikationen der Aromaten geh{\"o}ren auch Glucosereste. Dadurch k{\"o}nnten sich die hier hergestellten Endoperoxide als vielversprechende Verbindungen in der Krebstherapie herausstellen, da Krebszellen deutlich st{\"a}rker als gesunde Zellen kohlenhydratreiche Verbindungen f{\"u}r ihren Stoffwechsel ben{\"o}tigen. Bei der Spaltung von Endoperoxiden mit Glucosesubstituenten werden ebenfalls reaktive Sauerstoffspezies frei, die so zum Zelltod f{\"u}hren k{\"o}nnten.},
  language  = {de}
}
@phdthesis{Merkel2014,
  author    = {Merkel, Roswitha},
  title     = {Untersuchung zur Synthese und Eigenschaften von komplexen Oligospiroketalen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72561},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Es ist in dieser Arbeit gelungen, starre Oligospiroketal(OSK)-St{\"a}be als Grundbausteine f{\"u}r komplexe 2D- und 3D-Systeme zu verwenden. Dazu wurde ein difunktionalisierter starrer Stab synthetisiert, der mit seines Gleichen und anderen verzweigten Funktionalisierungseinheiten in Azid-Alkin-Klickreaktionen eingesetzt wurde. An zwei {\"u}ber Klickreaktion verkn{\"u}pften OSK-St{\"a}ben konnten mittels theoretischer Berechnungen Aussagen {\"u}ber die neuartige Bimodalit{\"a}t der Konformation getroffen werden. Es wurde daf{\"u}r der Begriff Gelenkstab eingef{\"u}hrt, da die Molek{\"u}le um ein Gelenk gedreht sowohl gestreckt als auch geknickt vorliegen k{\"o}nnen. Aufbauend auf diesen Erkenntnissen konnte gezeigt werden, dass nicht nur gezielt große Polymere aus bis zu vier OSK-St{\"a}ben synthetisiert werden k{\"o}nnen, sondern es auch m{\"o}glich ist, durch gezielte {\"A}nderung von Reaktionsbedingungen der Klickreaktion auch Cyclen aus starren OSK-St{\"a}ben herzustellen. Die neu entwickelte Substanzklasse der Gelenkst{\"a}be wurde im Hinblick auf die Steuerung des vorliegenden Gleichgewichts zwischen geknicktem und gestrecktem Gelenkstab hin untersucht. Daf{\"u}r wurde der Gelenkstab mit Pyrenylresten in terminaler Position versehen. Es wurde durch Fluoreszenzmessungen festgestellt, dass das Gleichgewicht z. B. durch die Temperatur oder die Wahl des L{\"o}sungsmittels beeinflussbar ist. F{\"u}r vielfache Anwendungen wurde eine vereinfachte Synthesestrategie gefunden, mit der eine beliebige Funktionalisierung in nur einem Syntheseschritt erreicht werden konnte. Es konnten photoaktive Gelenkst{\"a}be synthetisiert werden, die gezielt zur intramolekularen Dimerisierung gef{\"u}hrt werden konnten. Zus{\"a}tzlich wurde durch Aminos{\"a}uren ein Verkn{\"u}pfungselement am Ende der Gelenkst{\"a}be gefunden, das eine stereoselektive Synthese von Mehrfachfunktionalisierungen zul{\"a}sst. Die Synthese der komplexen Gelenkst{\"a}be wurde als ein neuartiges Gebiet aufgezeigt und bietet ein breites Forschungspotential f{\"u}r weitere Anwendungen z. B. in der Biologie (als molekulare Schalter f{\"u}r Ionentransporte) und in der Materialchemie (als Ladungs- oder Energietransporteure).},
  language  = {de}
}
@phdthesis{Olak2008,
  author    = {Olak, Claudia},
  title     = {Untersuchung zur Rolle von Adapterprotein-Komplexen im Targeting der Glucosetransporter GLUT8 und GLUT4},
  address   = {Potsdam},
  pages     = {131,xii S. : graph. Darst.},
  year      = {2008},
  language  = {de}
}
@phdthesis{Moeller1998,
  author    = {M{\"o}ller, Gunter Eric},
  title     = {Untersuchung von Fl{\"u}ssig / Fl{\"u}ssig Elektrolytgrenzfl{\"a}chen mit optischen und elektrochemischen Methoden},
  address   = {Potsdam},
  pages     = {97 S. : graph. Darst.},
  year      = {1998},
  language  = {de}
}
@phdthesis{Werner2018,
  author    = {Werner, Peter},
  title     = {Untersuchung stark-streuender Polymersuspensionen mittels optischer Methoden},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVIII, 119, XXXV},
  year      = {2018},
  language  = {de}
}
@phdthesis{Fandrich2016,
  author    = {Fandrich, Artur},
  title     = {Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-396551},
  school      = {Universit{\"a}t Potsdam},
  pages     = {111},
  year      = {2016},
  abstract  = {Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis f{\"u}r die Entwicklung der responsiven Grenzfl{\"a}che dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in L{\"o}sungen haben gezeigt, dass der Tr{\"u}bungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenst{\"a}rke der L{\"o}sung abh{\"a}ngig ist. Nach der Charakterisierung der Polymere in L{\"o}sung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfl{\"a}che der Gold-Elektroden durchgef{\"u}hrt. W{\"a}hrend bei Polymeren I und II die Ankopplung auf einer Amidverbr{\"u}ckung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gew{\"a}hlt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-L{\"o}sungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung {\"u}ber Amidverbr{\"u}ckung lieferte d{\"u}nne Filme (10 - 15 nm), w{\"a}hrend der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfl{\"a}che relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberfl{\"a}chen in L{\"o}sungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich - ab einem kritischen Punkt (37 °C f{\"u}r Polymer I und 45 °C f{\"u}r Polymer II) wird zun{\"a}chst langsame Zunahme der Peakstr{\"o}me wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix f{\"u}r Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgef{\"u}hrt. Das hydrophile FLAG-TAG-Peptid ver{\"a}ndert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antik{\"o}rper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antik{\"o}rper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antik{\"o}rper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. F{\"u}r die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgew{\"a}hlt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringf{\"u}gig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode {\"a}hnelt dem der reinen Polymer III-Elektrode - die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich ver{\"a}ndert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Str{\"o}me f{\"u}r die HA-TAG-Elektroden sind deutlich geringer als die f{\"u}r die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zur{\"u}ckzuf{\"u}hren ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdr{\"a}ngt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies f{\"u}hrt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabh{\"a}ngigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolek{\"u}l deutlich besser f{\"u}r eine potentielle Verwendung der Polymer III-Filme f{\"u}r sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet.},
  language  = {de}
}
@phdthesis{Regenbrecht1999,
  author    = {Regenbrecht, Matthias},
  title     = {Untersuchung des Benetzungsverhaltens wasserl{\"o}slicher mizellarer Polyelektrolyt-Diblockcopolymer-Aggregate an der Luft/Festk{\"o}rper- und Fl{\"u}ssig/Festk{\"o}rper-Grenzfl{\"a}che auf Nanometer-Skala mit der Rasterkraftmikroskopie},
  pages     = {121 S.},
  year      = {1999},
  language  = {de}
}
@phdthesis{Dittmer2009,
  author    = {Dittmer, Mareike},
  title     = {Unterricht, E-Mail und Internet in Kombination f{\"u}r das Lernen im Chemieunterricht},
  address   = {Potsdam},
  pages     = {112 S. : Ill., graph. Darst. + 1 CD-ROM},
  year      = {2009},
  language  = {de}
}
@phdthesis{Traeger2012,
  author    = {Traeger, Juliane},
  title     = {Unges{\"a}ttigte Dithioetherliganden : selektive Extraktionsmittel f{\"u}r die Gewinnung von Palladium(II) aus Sekund{\"a}rrohstoffen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64753},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {Die Entwicklung neuer Verfahren f{\"u}r die R{\"u}ckf{\"u}hrung von Palladium aus Altmaterialien, wie gebrauchten Autoabgaskatalysatoren, in den Stoffstromkreislauf ist sowohl aus {\"o}kologischer als auch {\"o}konomischer Sicht erstrebenswert. In dieser Arbeit wurden neue Fl{\"u}ssig-Fl{\"u}ssig- und Fest-Fl{\"u}ssig-Extraktionsmittel entwickelt, mit denen Palladium(II) aus einer oxidierenden, salzsauren Laugungsl{\"o}sung, die neben Palladium auch Platin und Rhodium sowie zahlreiche unedle Metalle enth{\"a}lt, zur{\"u}ckgewonnen werden kann. Die neuen Extraktionsmittel unges{\"a}ttigte monomere 1,2-Dithioether und oligomere Ligandenmischungen mit vicinalen Dithioether-Einheiten - sind im Gegensatz zu vielen in der Literatur aufgef{\"u}hrten Extraktionsmitteln hochselektiv. Aufgrund ihrer geometrischen und elektronischen Pr{\"a}organisation bilden sie mit Palladium(II) stabile quadratisch-planare Chelatkomplexe. F{\"u}r die Entwicklung des Fl{\"u}ssig-Fl{\"u}ssig-Extraktionsmittels wurde eine Reihe von unges{\"a}ttigten 1,2-Dithioetherliganden dargestellt, welche auf einer starren 1,2-Dithioethen-Einheit, die in ein variierendes elektronenziehendes Grundger{\"u}st eingebettet ist, basieren und polare Seitenketten besitzen. Neben der Bestimmung der Kristallstrukturen der Liganden und ihrer Palladiumdichlorid-Komplexe wurden die elektro- und photochemischen Eigenschaften, die Komplexstabilit{\"a}t und das Verhalten in L{\"o}sung untersucht. In Fl{\"u}ssig-Fl{\"u}ssig-Extraktionsuntersuchungen konnte gezeigt werden, dass einige der neuen Liganden industriell genutzten Extraktionsmitteln durch eine schnellere Einstellung des Extraktionsgleichgewichts {\"u}berlegen sind. Anhand von Kriterien, die f{\"u}r eine industrielle Nutzbarkeit entscheidend sind, wie: guter Oxidationsbest{\"a}ndigkeit, einer hohen Extraktionsausbeute (auch bei hohen Salzs{\"a}urekonzentrationen der Speisel{\"o}sung), schneller Extraktionskinetik und einer hohen Selektivit{\"a}t f{\"u}r Palladium(II) wurde aus der Reihe der sechs Liganden ein geeignetes Fl{\"u}ssig-Fl{\"u}ssig-Extraktionsmittel ausgew{\"a}hlt: 1,2-Bis(2-methoxyethylthio)benzen. Mit diesem wurde ein praxisnahes Fl{\"u}ssig-Fl{\"u}ssig-Extraktionssystem entwickelt. Nach der schrittweisen Adaption der w{\"a}ssrigen Phase von einer Modelll{\"o}sung hin zu der oxidierenden, salzsauren Laugungsl{\"o}sung erfolgte die Auswahl eines geeigneten großtechnisch, einsetzbaren L{\"o}semittels (1,2-Dichlorbenzen) und eines effizienten Reextraktionsmittels (0,5 M Thioharnstoff in 0,1 M HCl). Die hohe Palladium(II)-Selektivit{\"a}t dieses Fl{\"u}ssig-Fl{\"u}ssig-Extraktionssystems konnte verifiziert und seine Wiederverwendbarkeit und Praxistauglichkeit unter Beweis gestellt werden. Weiterhin wurde gezeigt, dass sich beim Kontakt mit oxidierenden Medien aus dem Dithioether 1,2-Bis(2-methoxyethylthio)benzen geringe Mengen des Thioethersulfoxids 1-(2-Methoxyethylsulfinyl)-2-(2-methoxyethylthio)benzen bilden. Dieses wird im sauren Milieu protoniert und beschleunigt die Extraktion wie ein Phasentransferkatalysator, ohne jedoch die Palladium(II)-Selektivit{\"a}t herabzusetzen. Die Kristallstruktur des Palladiumdichlorid-Komplexes des Tioethersulfoxids zeigt, dass der unprotonierte Ligand Palladium(II), analog zum Dithioether, {\"u}ber die chelatisierenden Schwefelatome koordiniert. Verschiedene Mischungen von Oligo(dithioether)-Liganden und der monomere Ligand 1,2-Bis(2-methoxyethylthio)benzen dienten als Extraktionsmittel f{\"u}r Fest-Fl{\"u}ssig-Extraktionsversuche mit SIRs (solvent impregnated resins) und wurden zu diesem Zweck auf hydrophilem Kieselgel und organophilem Amberlite® XAD 2 adsorbiert. Die Oligo(dithioether)-Liganden basieren auf 1,2-Dithiobenzen oder 1,2-Dithiomaleonitril-Einheiten, welche {\"u}ber Tris(oxyethylen)ethylen- oder Trimethylen-Br{\"u}cken miteinander verkn{\"u}pft sind. Mit Hilfe von Batch-Versuchen konnte gezeigt werden, dass sich strukturelle Unterschiede - wie die Art der chelatisierenden Einheit, die Art der verbr{\"u}ckenden Ketten und das Tr{\"a}germaterial - auf die Extraktionsausbeuten, die Extraktionskinetik und die Beladungskapazit{\"a}t auswirken. Die kieselgelhaltigen SIRs stellen das Extraktionsgleichgewicht viel schneller ein als die Amberlite® XAD 2-haltigen. Jedoch bleiben die Extraktionsmittel auf Amberlite® XAD 2, im Gegensatz zu Kieselgel, dauerhaft haften. Im salzsauren Milieu sind die 1,2-Dithiobenzen-derivate besser als Extraktionsmittel geeignet als die 1,2-Dithiomaleonitrilderivate. In S{\"a}ulenversuchen mit der oxidierenden, salzsauren Laugungsl{\"o}sung und wiederverwendbaren, mit 1,2-Dithiobenzenderivaten impr{\"a}gnierten, Amberlite® XAD 2-haltigen SIRs zeigte sich, dass f{\"u}r die Realisierung hoher Beladungskapazit{\"a}ten sehr geringe Pumpraten ben{\"o}tigt werden. Trotzdem konnte die gute Palladium(II)-Selektivit{\"a}t dieser Festphasenmaterialien demonstriert werden. Allerdings wurden in den Eluaten im Gegensatz zu den Eluaten, die aus Fl{\"u}ssig-Fl{\"u}ssig-Extraktion resultierten neben dem Palladium auch geringe Mengen an Platin, Aluminium, Eisen und Blei gefunden.},
  language  = {de}
}
@phdthesis{Hildebrand2016,
  author    = {Hildebrand, Viet},
  title     = {Twofold switchable block copolymers based on new polyzwitterions},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101372},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 170, LXXX},
  year      = {2016},
  abstract  = {In complement to the well-established zwitterionic monomers 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate ("SPE") and 3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate ("SPP"), the closely related sulfobetaine monomers were synthesized and polymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar mass were characterized with respect to their solubility in water, deuterated water, and aqueous salt solutions. These poly(sulfobetaine)s show thermoresponsive behavior in water, exhibiting upper critical solution temperatures (UCST). Phase transition temperatures depend notably on the molar mass and polymer concentration, and are much higher in D2O than in H2O. Also, the phase transition temperatures are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed structure of the zwitterionic side chain, on the other hand. For the polymers with the same zwitterionic side chain, it is found that methacrylamide-based poly(sulfobetaine)s exhibit higher UCST-type transition temperatures than their methacrylate analogs. The extension of the distance between polymerizable unit and zwitterionic groups from 2 to 3 methylene units decreases the UCST-type transition temperatures. Poly(sulfobetaine)s derived from aliphatic esters show higher UCST-type transition temperatures than their analogs featuring cyclic ammonium cations. The UCST-type transition temperatures increase markedly with spacer length separating the cationic and anionic moieties from 3 to 4 methylene units. Thus, apparently small variations of their chemical structure strongly affect the phase behavior of the polyzwitterions in specific aqueous environments. Water-soluble block copolymers were prepared from the zwitterionic monomers and the non-ionic monomer N-isopropylmethacrylamide ("NIPMAM") by the RAFT polymerization. Such block copolymers with two hydrophilic blocks exhibit twofold thermoresponsive behavior in water. The poly(sulfobetaine) block shows an UCST, whereas the poly(NIPMAM) block exhibits a lower critical solution temperature (LCST). This constellation induces a structure inversion of the solvophobic aggregate, called "schizophrenic micelle". Depending on the relative positions of the two different phase transitions, the block copolymer passes through a molecularly dissolved or an insoluble intermediate regime, which can be modulated by the polymer concentration or by the addition of salt. Whereas, at low temperature, the poly(sulfobetaine) block forms polar aggregates that are kept in solution by the poly(NIPMAM) block, at high temperature, the poly(NIPMAM) block forms hydrophobic aggregates that are kept in solution by the poly(sulfobetaine) block. Thus, aggregates can be prepared in water, which switch reversibly their "inside" to the "outside", and vice versa.},
  language  = {en}
}
@phdthesis{Sievers2010,
  author    = {Sievers, Torsten},
  title     = {Tuning and understanding chain-length of metallo-supramolecular coordination polymers},
  address   = {Potsdam},
  pages     = {VI, 163 S. : graph. Darst.},
  year      = {2010},
  language  = {en}
}
@phdthesis{TroegerMueller2018,
  author    = {Tr{\"o}ger-M{\"u}ller, Steffen},
  title     = {Truly sustainable imidazolium ionics},
  school      = {Universit{\"a}t Potsdam},
  pages     = {158},
  year      = {2018},
  language  = {de}
}
@phdthesis{Haubitz2021,
  author    = {Haubitz, Toni},
  title     = {Transient absorption spectroscopy},
  doi       = {10.25932/publishup-53509},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-535092},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 176},
  year      = {2021},
  abstract  = {The optical properties of chromophores, especially organic dyes and optically active inorganic molecules, are determined by their chemical structures, surrounding media, and excited state behaviors. The classical optical go-to techniques for spectroscopic investigations are absorption and luminescence spectroscopy. While both techniques are powerful and easy to apply spectroscopic methods, the limited time resolution of luminescence spectroscopy and its reliance on luminescent properties can make its application, in certain cases, complex, or even impossible. This can be the case when the investigated molecules do not luminesce anymore due to quenching effects, or when they were never luminescent in the first place. In those cases, transient absorption spectroscopy is an excellent and much more sophisticated technique to investigate such systems. This pump-probe laser-spectroscopic method is excellent for mechanistic investigations of luminescence quenching phenomena and photoreactions. This is due to its extremely high time resolution in the femto- and picosecond ranges, where many intermediate or transient species of a reaction can be identified and their kinetic evolution can be observed. Furthermore, it does not rely on the samples being luminescent, due to the active sample probing after excitation. In this work it is shown, that with transient absorption spectroscopy it was possible to identify the luminescence quenching mechanisms and thus luminescence quantum yield losses of the organic dye classes O4-DBD, S4-DBD, and pyridylanthracenes. Hence, the population of their triplet states could be identified as the competitive mechanism to their luminescence. While the good luminophores O4-DBD showed minor losses, the S4-DBD dye luminescence was almost entirely quenched by this process. However, for pyridylanthracenes, this phenomenon is present in both the protonated and unprotonated forms and moderately effects the luminescence quantum yield. Also, the majority of the quenching losses in the protonated forms are caused by additional non-radiative processes introduced by the protonation of the pyridyl rings. Furthermore, transient absorption spectroscopy can be applied to investigate the quenching mechanisms of uranyl(VI) luminescence by chloride and bromide. The reduction of the halides by excited uranyl(VI) leads to the formation of dihalide radicals X^(·-2). This excited state redox process is thus identified as the quenching mechanism for both halides, and this process, being diffusion-limited, can be suppressed by cryogenically freezing the samples or by observing these interactions in media with a lower dielectric constant, such as ACN and acetone.},
  language  = {en}
}
@phdthesis{Witt2017,
  author    = {Witt, Barbara},
  title     = {Toxicological characterization of lipid-soluble arsenic species in human brain cells},
  school      = {Universit{\"a}t Potsdam},
  pages     = {118, V},
  year      = {2017},
  language  = {en}
}
@phdthesis{Nozari2005,
  author    = {Nozari, Samira},
  title     = {Towards understanding RAFT aqueous heterophase polymerization},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5801},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {Reversible addition-fragmentation transfer (RAFT) was used as a controlling technique for studying the aqueous heterophase polymerization. The polymerization rates obtained by calorimetric investigation of ab initio emulsion polymerization of styrene revealed the strong influence of the type and combination of the RAFT agent and initiator on the polymerization rate and its profile. The studies in all-glass reactors on the evolution of the characteristic data such as average molecular weight, molecular weight distribution, and average particle size during the polymerization revealed the importance of the peculiarities of the heterophase system such as compartmentalization, swelling, and phase transfer. These results illustrated the important role of the water solubility of the initiator in determining the main loci of polymerization and the crucial role of the hydrophobicity of the RAFT agent for efficient transportation to the polymer particles. For an optimum control during ab-initio batch heterophase polymerization of styrene with RAFT, the RAFT agent must have certain hydrophilicity and the initiator must be water soluble in order to minimize reactions in the monomer phase. An analytical method was developed for the quantitative measurements of the sorption of the RAFT agents to the polymer particles based on the absorption of the visible light by the RAFT agent. Polymer nanoparticles, temperature, and stirring were employed to simulate the conditions of a typical aqueous heterophase polymerization system. The results confirmed the role of the hydrophilicity of the RAFT agent on the effectiveness of the control due to its fast transportation to the polymer particles during the initial period of polymerization after particle nucleation. As the presence of the polymer particles were essential for the transportation of the RAFT agents into the polymer dispersion, it was concluded that in an ab initio emulsion polymerization the transport of the hydrophobic RAFT agent only takes place after the nucleation and formation of the polymer particles. While the polymerization proceeds and the particles grow the rate of the transportation of the RAFT agent increases with conversion until the free monomer phase disappears. The degradation of the RAFT agent by addition of KPS initiator revealed unambigueous evidence on the mechanism of entry in heterophase polymerization. These results showed that even extremely hydrophilic primary radicals, such as sulfate ion radical stemming from the KPS initiator, can enter the polymer particles without necessarily having propagated and reached a certain chain length. Moreover, these results recommend the employment of azo-initiators instead of persulfates for the application in seeded heterophase polymerization with RAFT agents. The significant slower rate of transportation of the RAFT agent to the polymer particles when its solvent (styrene) was replaced with a more hydrophilic monomer (methyl methacrylate) lead to the conclusion that a complicated cooperative and competitive interplay of solubility parameters and interaction parameter with the particles exist, determining an effective transportation of the organic molecules to the polymer particles through the aqueous phase. The choice of proper solutions of even the most hydrophobic organic molecules can provide the opportunity of their sorption into the polymer particles. Examples to support this idea were given by loading the extremely stiff fluorescent molecule, pentacene, and very hydrophobic dye, Sudan IV, into the polymer particles. Finally, the first application of RAFT at room temperature heterophase polymerization is reported. The results show that the RAFT process is effective at ambient temperature; however, the rate of fragmentation is significantly slower. The elevation of the reaction temperature in the presence of the RAFT agent resulted in faster polymerization and higher molar mass, suggesting that the fragmentation rate coefficient and its dependence on the temperature is responsible for the observed retardation.},
  subject      = {Heterophasenpolymerisation},
  language  = {en}
}
@phdthesis{Tan2011,
  author    = {Tan, Irene},
  title     = {Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53130},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as 'intelligent materials' and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature 'switch' in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive.},
  language  = {en}
}
@phdthesis{Harmanli2020,
  author    = {Harmanli, İpek},
  title     = {Towards catalytic activation of nitrogen in ionic liquid/nanoporous carbon interfaces for electrochemical ammonia synthesis},
  doi       = {10.25932/publishup-48359},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-483591},
  school      = {Universit{\"a}t Potsdam},
  pages     = {v, 126},
  year      = {2020},
  abstract  = {Ammonia is a chemical of fundamental importance for nature`s vital nitrogen cycle. It is crucial for the growth of living organisms as well as food and energy source. Traditionally, industrial ammonia production is predominated by Haber- Bosch process (HBP) which is based on direct conversion of N2 and H2 gas under high temperature and high pressure (~500oC, 150-300 bar). However, it is not the favorite route because of its thermodynamic and kinetic limitations, and the need for the energy intense production of hydrogen gas by reforming processes. All these disfavors of HBP open a target to search for an alternative technique to perform efficient ammonia synthesis via electrochemical catalytic processes, in particular via water electrolysis, using water as the hydrogen source to save the process from gas reforming. In this study, the investigation of the interface effects between imidazolium-based ionic liquids and the surface of porous carbon materials with a special interest in the nitrogen absorption capability. As the further step, the possibility to establish this interface as the catalytically active area for the electrochemical N2 reduction to NH3 has been evaluated. This particular combination has been chosen because the porous carbon materials and ionic liquids (IL) have a significant importance in many scientific fields including catalysis and electrocatalysis due to their special structural and physicochemical properties. Primarily, the effects of the confinement of ionic liquid (EmimOAc, 1-Ethyl-3-methylimidazolium acetate) into carbon pores have been investigated. The salt-templated porous carbons, which have different porosity (microporous and mesoporous) and nitrogen species, were used as model structures for the comparison of the IL confinement at different loadings. The nitrogen uptake of EmimOAc can be increased by about 10 times by the confinement in the pores of carbon materials compared to the bulk form. In addition, the most improved nitrogen absorption was observed by IL confinement in micropores and in nitrogen-doped carbon materials as a consequence of the maximized structural changes of IL. Furthermore, the possible use of such interfaces between EmimOAc and porous carbon for the catalytic activation of dinitrogen during the kinetically challenging NRR due to the limited gas absorption in the electrolyte, was examined. An electrocatalytic NRR system based on the conversion of water and nitrogen gas to ammonia at ambient operation conditions (1 bar, 25 °C) was performed in a setup under an applied electric potential with a single chamber electrochemical cell, which consists of the combination of EmimOAc electrolyte with the porous carbon-working electrode and without a traditional electrocatalyst. Under a potential of -3 V vs. SCE for 45 minutes, a NH3 production rate of 498.37 μg h-1 cm-2 and FE of 12.14\% were achieved. The experimental observations show that an electric double-layer, which serves the catalytically active area, occurs between a microporous carbon material and ions of the EmimOAc electrolyte in the presence of sufficiently high provided electric potential. Comparing with the typical NRR systems which have been reported in the literature, the presented electrochemical ammonia synthesis approach provides a significantly higher ammonia production rate with a chance to avoid the possible kinetic limitations of NRR. In terms of operating conditions, ammonia production rate and the faradic efficiency without the need for any synthetic electrocatalyst can be resulted of electrocatalytic activation of nitrogen in the double-layer formed between carbon and IL ions.},
  language  = {en}
}
@phdthesis{Justynska2005,
  author    = {Justynska, Justyna},
  title     = {Towards a library of functional block copolymers : synthesis and colloidal properties},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5907},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {Understanding the principles of self-organisation exhibited by block copolymers requires the combination of synthetic and physicochemical knowledge. The ability to synthesise block copolymers with desired architecture facilitates the ability to manipulate their aggregation behaviour, thus providing the key to nanotechnology. Apart from relative block volumes, the size and morphology of the produced nanostructures is controlled by the effective incompatibility between the different blocks. Since polymerisation techniques allowing for the synthesis of well-defined block copolymers are restricted to a limited number of monomers, the ability to tune the incompatibility is very limited. Nevertheless, Polymer Analogue Reactions can offer another possibility for the production of functional block copolymers by chemical modifications of well-defined polymer precursors. Therefore, by applying appropriate modification methods both volume fractions and incompatibility, can be adjusted. Moreover, copolymers with introduced functional units allow utilization of the concept of molecular recognition in the world of synthetic polymers. The present work describes a modular synthetic approach towards functional block copolymers. Radical addition of functional mercaptanes was employed for the introduction of diverse functional groups to polybutadiene-containing block copolymers. Various modifications of 1,2-polybutadiene-poly(ethylene oxide) block copolymer precursors are described in detail. Furthermore, extension of the concept to 1,2-polybutadiene-polystyrene block copolymers is demonstrated. Further investigations involved the self-organisation of the modified block copolymers. Formed aggregates in aqueous solutions of block copolymers with introduced carboxylic acid, amine and hydroxyl groups as well as fluorinated chains were characterised. Study of the aggregation behaviour allowed general conclusions to be drawn regarding the influence of the introduced groups on the self-organisation of the modified copolymers. Finally, possibilities for the formation of complexes, based on electrostatic or hydrogen-bonding interactions in mixtures of block copolymers bearing mutually interacting functional groups, were investigated.},
  subject      = {Blockcopolymere},
  language  = {en}
}
@phdthesis{Lee2018,
  author    = {Lee, Hui-Chun},
  title     = {Toward ultimate control of polymerization and catalytic property},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414973},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vii, iii, 150},
  year      = {2018},
  abstract  = {Reversible-deactivation radical polymerization (RDRP) is without any doubt one of the most prevalent and powerful strategies for polymer synthesis, by which well-defined living polymers with targeted molecular weight (MW), low molar dispersity (Ɖ) and diverse morphologies can be prepared in a controlled fashion. Atom transfer radical polymerization (ATRP) as one of the most extensive studied types of RDRP has been particularly emphasized due to the high accessibility to hybrid materials, multifunctional copolymers and diverse end group functionalities via commercially available precursors. However, due to catalyst-induced side reactions and chain-chain coupling termination in bulk environment, synthesis of high MW polymers with uniform chain length (low Ɖ) and highly-preserved chain-end fidelity is usually challenging. Besides, owing to the inherited radical nature, the control of microstructure, namely tacticity control, is another laborious task. Considering the applied catalysts, the utilization of large amounts of non-reusable transition metal ions which lead to cumbersome purification process, product contamination and complicated reaction procedures all delimit the scope ATRP techniques. Metal-organic frameworks (MOFs) are an emerging type of porous materials combing the properties of both organic polymers and inorganic crystals, characterized with well-defined crystalline framework, high specific surface area, tunable porous structure and versatile nanochannel functionalities. These promising properties of MOFs have thoroughly revolutionized academic research and applications in tremendous aspects, including gas processing, sensing, photoluminescence, catalysis and compartmentalized polymerization. Through functionalization, the microenvironment of MOF nanochannel can be precisely devised and tailored with specified functional groups for individual host-guest interactions. Furthermore, properties of high transition metal density, accessible catalytic sites and crystalline particles all indicate MOFs as prominent heterogeneous catalysts which open a new avenue towards unprecedented catalytic performance. Although beneficial properties in catalysis, high agglomeration and poor dispersibility restrain the potential catalytic capacity to certain degree. Due to thriving development of MOF sciences, fundamental polymer science is undergoing a significant transformation, and the advanced polymerization strategy can eventually refine the intrinsic drawbacks of MOF solids reversely. Therefore, in the present thesis, a combination of low-dimensional polymers with crystalline MOFs is demonstrated as a robust and comprehensive approach to gain the bilateral advantages from polymers (flexibility, dispersibility) and MOFs (stability, crystallinity). The utilization of MOFs for in-situ polymerizations and catalytic purposes can be realized to synthesize intriguing polymers in a facile and universal process to expand the applicability of conventional ATRP methodology. On the other hand, through the formation of MOF/polymer composites by surface functionalization, the MOF particles with environment-adjustable dispersibility and high catalytic property can be as-prepared. In the present thesis, an approach via combination of confined porous textures from MOFs and controlled radical polymerization is proposed to advance synthetic polymer chemistry. Zn2(bdc)2(dabco) (Znbdc) and the initiator-functionalized Zn MOFs, ZnBrbdc, are utilized as a reaction environment for in-situ polymerization of various size-dependent methacrylate monomers (i.e. methyl, ethyl, benzyl and isobornyl methacrylate) through (surface-initiated) activators regenerated by electron transfer (ARGET/SI-ARGET) ATRP, resulting in polymers with control over dispersity, end functionalities and tacticity with respect to distinct molecular size. While the functionalized MOFs are applied, due to the strengthened compartmentalization effect, the accommodated polymers with molecular weight up to 392,000 can be achieved. Moreover, a significant improvement in end-group fidelity and stereocontrol can be observed. The results highlight a combination of MOFs and ATRP is a promising and universal methodology to synthesize versatile well-defined polymers with high molecular weight, increment in isotactic trial and the preserved chain-end functionality. More than being a host only, MOFs can act as heterogeneous catalysts for metal-catalyzed polymerizations. A Cu(II)-based MOF, Cu2(bdc)2(dabco), is demonstrated as a heterogeneous, universal catalyst for both thermal or visible light-triggered ARGET ATRP with expanded monomer range. The accessible catalytic metal sites enable the Cu(II) MOF to polymerize various monomers, including benzyl methacrylate (BzMA), styrene, methyl methacrylate (MMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA) in the fashion of ARGET ATRP. Furthermore, due to the robust frameworks, surpassing the conventional homogeneous catalyst, the Cu(II) MOF can tolerate strongly coordinating monomers and polymerize challenging monomers (i.e. 4-vinyl pyridine, 2-vinyl pyridine and isoprene), in a well-controlled fashion. Therefore, a synthetic procedure can be significantly simplified, and catalyst-resulted chelation can be avoided as well. Like other heterogeneous catalysts, the Cu(II) MOF catalytic complexes can be easily collected by centrifugation and recycled for an arbitrary amount of times. The Cu(II) MOF, composed of photostimulable metal sites, is further used to catalyze controlled photopolymerization under visible light and requires no external photoinitiator, dye sensitizer or ligand. A simple light trigger allows the photoreduction of Cu(II) to the active Cu(I) state, enabling controlled polymerization in the form of ARGET ATRP. More than polymerization application, the synergic effect between MOF frameworks and incorporated nucleophilic monomers/molecules is also observed, where the formation of associating complexes is able to adjust the photochemical and electrochemical properties of the Cu(II) MOF, altering the band gap and light harvesting behavior. Owing to the tunable photoabsorption property resulting from the coordinating guests, photoinduced Reversible-deactivation radical polymerization (PRDRP) can be achieved to further simplify and fasten the polymerization. More than the adjustable photoabsorption ability, the synergistic strategy via a combination of controlled/living polymerization technique and crystalline MOFs can be again evidenced as demonstrated in the MOF-based heterogeneous catalysts with enhanced dispersibility in solution. Through introducing hollow pollen pivots with surface immobilized environment-responsive polymer, PDMAEMA, highly dispersed MOF nanocrystals can be prepared after associating on polymer brushes via the intrinsic amine functionality in each DMAEMA monomer. Intriguingly, the pollen-PDMAEMA composite can serve as a "smart" anchor to trap nanoMOF particles with improved dispersibility, and thus to significantly enhance liquid-phase photocatalytic performance. Furthermore, the catalytic activity can be switched on and off via stimulable coil-to-globule transition of the PDMAEMA chains exposing or burying MOF catalytic sites, respectively.},
  language  = {en}
}
@phdthesis{Schultze2019,
  author    = {Schultze, Christiane},
  title     = {Totalsynthese benzoannellierter Sauerstoffheterocyclen durch Mikrowellen induzierte Tandem-Sequenzen},
  school      = {Universit{\"a}t Potsdam},
  pages     = {193},
  year      = {2019},
  language  = {de}
}
@phdthesis{LopezdeGuerenu2020,
  author    = {L{\´o}pez de Guere{\~n}u, Anna},
  title     = {Tm3+-doped NaYF4 nanoparticles},
  doi       = {10.25932/publishup-47559},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-475593},
  school      = {Universit{\"a}t Potsdam},
  pages     = {119},
  year      = {2020},
  abstract  = {Lately, the integration of upconverting nanoparticles (UCNP) in industrial, biomedical and scientific applications has been increasingly accelerating, owing to the exceptional photophysical properties that UCNP offer. Some of the most promising applications lie in the field of medicine and bioimaging due to such advantages as, among others, deeper tissue penetration, reduced optical background, possibility for multicolor imaging, and lower toxicity, compared to many known luminophores. However, some questions regarding not only the fundamental photophysical processes, but also the interaction of the UCNP with other luminescent reporters frequently used for bioimaging and the interaction with biological media remain unanswered. These issues were the primary motivation for the presented work. This PhD thesis investigated several aspects of various properties and possibilities for bioapplications of Yb3+,Tm3+-doped NaYF4 upconverting nanoparticles. First, the effect of Gd3+ doping on the structure and upconverting behaviour of the nanocrystals was assessed. The ageing process of the UCNP in cyclohexane was studied over 24 months on the samples with different Gd3+ doping concentrations. Structural information was gathered by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and discussed in relation to spectroscopic results, obtained through multiparameter upconversion luminescence studies at various temperatures (from 4 K to 295 K). Time-resolved and steady-state emission spectra recorded over this ample temperature range allowed for a deeper understanding of photophysical processes and their dependence on structural changes of UCNP. A new protocol using a commercially available high boiling solvent allowed for faster and more controlled production of very small and homogeneous UCNP with better photophysical properties, and the advantages of a passivating NaYF4 shell were shown. F{\"o}rster resonance energy transfer (FRET) between four different species of NaYF4: Yb3+, Tm3+ UCNP (synthesized using the improved protocol) and a small organic dye was studied. The influence of UCNP composition and the proximity of Tm3+ ions (donors in the process of FRET) to acceptor dye molecules have been assessed. The brightest upconversion luminescence was observed in the UCNP with a protective inert shell. UCNP with Tm3+ ions only in the shell were the least bright, but showed the most efficient energy transfer. In the final part, two surface modification strategies were applied to make UCNP soluble in water, which simultaneously allowed for linking them via a non-toxic copper-free click reaction to the liposomes, which served as models for further cell experiments. The results were assessed on a confocal microscope system, which was made possible by lesser known downshifting properties of Yb3+, Tm3+-doped UCNP. Preliminary antibody-staining tests using two primary and one dye-labelled secondary antibodies were performed on MDCK-II cells.},
  language  = {en}
}
@phdthesis{Bilkay2012,
  author    = {Bilkay, Taybet},
  title     = {Thiophen und Benzodithiophen basierte organische Halbleiter f{\"u}r aus L{\"o}sung prozessierbare Feldeffekttransistoren},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66164},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {Diese Arbeit befasst sich mit der Synthese und Charakterisierung von organol{\"o}slichen Thiophen und Benzodithiophen basierten Materialien und ihrer Anwendung als aktive lochleitende Halbleiterschichten in Feldeffekttransistoren. Im ersten Teil der Arbeit wird durch eine gezielte Modifikation des Thiophengrundger{\"u}stes eine neue Comonomer-Einheit f{\"u}r die Synthese von Thiophen basierten Copolymeren erfolgreich dargestellt. Die hydrophoben Hexylgruppen in der 3-Position des Thiophens werden teilweise durch hydrophile 3,6-Dioxaheptylgruppen ersetzt. {\"U}ber die Grignard-Metathese nach McCullough werden statistische Copolymere mit unterschiedlichen molaren Anteilen vom hydrophoben Hexyl- und hydrophilem 3,6-Dioxaheptylgruppen 1:1 (P-1), 1:2 (P-2) und 2:1 (P-3) erfolgreich hergestellt. Auch die Synthese eines definierten Blockcopolymers BP-1 durch sequentielle Addition der Comonomere wird realisiert. Optische und elektrochemische Eigenschaften der neuartigen Copolymere sind vergleichbar mit P3HT. Mit allen Copolymeren wird ein charakteristisches Transistorverhalten in einem Top-Gate/Bottom-Kontakt-Aufbau erhalten. Dabei werden mit P-1 als die aktive Halbleiterschicht im Bauteil, PMMA als Dielektrikum und Silber als Gate-Elektrode Mobilit{\"a}ten von bis zu 10-2 cm2/Vs erzielt. Als Folge der optimierten Grenzfl{\"a}che zwischen Dielektrikum und Halbleiter wird eine Verbesserung der Luftstabilit{\"a}t der Transistoren {\"u}ber mehrere Monate festgestellt. Im zweiten Teil der Arbeit werden Benzodithiophen basierte organische Materialien hergestellt. F{\"u}r die Synthese der neuartigen Benzodithiophen-Derivate wird die Schl{\"u}sselverbindung TIPS-BDT in guter Ausbeute dargestellt. Die Difunktionalisierung von TIPS-BDT in den 2,6-Positionen {\"u}ber eine elektrophile Substitution liefert die gew{\"u}nschten Dibrom- und Distannylmonomere. Zun{\"a}chst werden {\"u}ber die Stille-Reaktion alternierende Copolymere mit alkylierten Fluoren- und Chinoxalin-Einheiten realisiert. Alle Copolymere zeichnen sich durch eine gute L{\"o}slichkeit in g{\"a}ngigen organischen L{\"o}sungsmitteln, hohe thermische Stabilit{\"a}t und durch gute Filmbildungseigenschaften aus. Des Weiteren sind alle Copolymere mit HOMO Lagen h{\"o}her als -6.3 eV, verglichen mit den Thiophen basierten Copolymeren (P-1 bis P-3), sehr oxidationsstabil. Diese Copolymere zeigen amorphes Verhalten in den Halbleiterschichten in OFETs auf und es werden Mobilit{\"a}ten bis zu 10-4 cm2/Vs erreicht. Eine Abh{\"a}ngigkeit der Bauteil-Leistung von dem Zinngehalt-Rest im Polymer wird nachgewiesen. Ein Zinngehalt von {\"u}ber 0.6 \% kann enormen Einfluss auf die Mobilit{\"a}t aus{\"u}ben, da die funktionellen SnMe3-Gruppen als Fallenzust{\"a}nde wirken k{\"o}nnen. Alternativ wird das alternierende TIPS-BDT/Fluoren-Copolymer P-5-Stille nach der Suzuki-Methode polymerisiert. Mit P-5-Suzuki als die aktive organische Halbleiterschicht im OFET wird die h{\"o}chste Mobilit{\"a}t von 10-2 cm2/Vs erzielt. Diese Mobilit{\"a}t ist somit um zwei Gr{\"o}ßenordnungen h{\"o}her als bei P-5-Stille, da die Fallenzust{\"a}nde in diesem Fall minimiert werden und folglich der Ladungstransport verbessert wird. Sowohl das Homopolymer P-12 als auch das Copolymer mit dem aromatischen Akzeptor Benzothiadiazol P-9 f{\"u}hren zu schwerl{\"o}slichen Polymeren. Aus diesem Grund werden einerseits Terpolymere aus TIPS-BDT/Fluoren/BTD-Einheiten P-10 und P-11 aufgebaut und andererseits wird versucht die TIPS-BDT-Einheit in die Seitenkette des Styrols einzubringen. Mit der Einf{\"u}hrung von BTD in die Hauptpolymerkette werden insbesondere die Absorptions- und die elektrochemischen Eigenschaften beeinflusst. Im Vergleich zu dem TIPS-BDT/Fluoren-Copolymer reicht die Absorption bis in den sichtbaren Bereich und die LUMO Lage wird zu niederen Werten verschoben. Eine Verbesserung der Leistung in den Bauteilen wird jedoch nicht festgestellt. Die erfolgreiche erstmalige Synthese von TIPS-BDT als Seitenkettenpolymer an Styrol P-13 f{\"u}hrt zu einem l{\"o}slichen und amorphen Polymer mit vergleichbaren Mobilit{\"a}ten von Styrol basierten Polymeren (µ = 10-5 cm2/Vs) im OFET. Ein weiteres Ziel dieser Arbeit ist die Synthese von niedermolekularen organol{\"o}slichen Benzodithiophen-Derivaten. {\"U}ber Suzuki- und Stille-Reaktionen ist es erstmals m{\"o}glich, verschiedenartige Aromaten {\"u}ber eine σ-Bindung an TIPS-BDT in den 2,6-Positionen zu kn{\"u}pfen. Die UV/VIS-Untersuchungen zeigen, dass die Absorption durch die Verl{\"a}ngerung der π-Konjugationsl{\"a}nge zu h{\"o}heren Wellenl{\"a}ngen verschoben wird. Dar{\"u}ber hinaus ist es m{\"o}glich, thermisch vernetzbare Gruppen wie Allyloxy in das Molek{\"u}lger{\"u}st einzubauen. Das Einf{\"u}hren von F-Atomen in das Molek{\"u}lger{\"u}st resultiert in einer verst{\"a}rkten Packungsordnung im Fluorbenzen funktionalisiertem TIPS-BDT (SM-4) im Festk{\"o}rper mit sehr guten elektronischen Eigenschaften im OFET, wobei Mobilit{\"a}ten bis zu 0.09 cm2/Vs erreicht werden.},
  language  = {de}
}
@phdthesis{Freyse2022,
  author    = {Freyse, Daniel},
  title     = {Thioacetal-Bausteine f{\"u}r Fluoreszenzfarbstoffe und molekulare St{\"a}be},
  doi       = {10.25932/publishup-54925},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549252},
  school      = {Universit{\"a}t Potsdam},
  pages     = {292},
  year      = {2022},
  abstract  = {Im Rahmen dieser Dissertation wurde der Sauerstoff im Grundger{\"u}st der [1,3]-Dioxolo[4.5-f]benzodioxol-Fluoreszenzfarbstoffe (DBD-Fluoreszenzfarbstoffe) vollst{\"a}ndig mit Schwefel ausgetauscht und daraus eine neue Klasse von Fluoreszenzfarbstoffen entwickelt, die Benzo[1,2-d:4,5-d']bis([1,3]dithiol)-Fluorophore (S4-DBD-Fluorophore). Insgesamt neun der besonders interessanten, difunktionalisierten Vertreter konnten synthetisiert werden, die sich in ihren elektronenziehenden Gruppen und in ihrer Anordnung unterschieden. Durch den Austausch von Sauerstoff mit Schwefel kam es zu teilweise auff{\"a}lligen Ver{\"a}nderungen in den Fluoreszenzparametern, wie eine Abnahme der Fluoreszenzquantenausbeuten und -lebenszeiten aber auch eine deutliche Rotverschiebung in den Absorptions- und Emissionswellenl{\"a}ngen mit großen STOKES-Verschiebungen. Damit sind die S4-DBD-Fluorophore eine wertvolle Erg{\"a}nzung f{\"u}r die DBD-Farbstoffe. Die Ursachen f{\"u}r die Abnahme der Lebenszeiten und Quantenausbeuten konnte auf eine hohe Besetzung des Triplett-Zustandes zur{\"u}ckgef{\"u}hrt werden, welcher durch die verst{\"a}rkten Spin-Bahn-Kopplungen des Schwefels hervorgerufen wird. Zusammen mit dem Arbeitskreis physikalische Chemie der Universit{\"a}t Potsdam konnten auch die photophysikalischen Prozesse {\"u}ber die Transienten-Absorptionsspektroskopie (TAS) aufgekl{\"a}rt werden. Eine Strategie zur Funktionalisierung der S4-DBD-Farbstoffe am Thioacetalger{\"u}st konnte entwickelt werden. So gelang es Alkohol-, Propargyl-, Azid-, NHS-Ester-, Carbons{\"a}ure-, Maleimid- und Tosyl-Gruppen an S4-DBD-Dialdehyden anzubringen. Erweiternd wurden molekulare St{\"a}be auf Basis von Schwefel-Oligo-Spiro-Ketalen (SOSKs) untersucht, bei denen Sauerstoff durch Schwefel ersetzt wurde. Hier konnten die Synthesen der l{\"o}slichkeitsvermittelnden TER-Muffe und auch des Tetrathiapentaerythritols als Grundbaustein deutlich verbessert werden. Aus diesen konnte ein einfaches SOSK-Polymer hergestellt werden. Weitere Versuche zum Aufbau eines Stabes m{\"u}ssen aber noch untersucht werden. Um einen S-OSK-Stab aufzubauen hat sich dabei die Dithiocarbonat-Gruppe in ersten Versuchen als potenzielle geeignete Schutzgruppe f{\"u}r das Tetrathiapentaerythritol herausgestellt.},
  language  = {de}
}
@phdthesis{Stoeckle2010,
  author    = {St{\"o}ckle, Silke},
  title     = {Thin liquid films with nanoparticles and rod-like ions as models for nanofluidics},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-46370},
  school      = {Universit{\"a}t Potsdam},
  year      = {2010},
  abstract  = {With the rise of nanotechnology in the last decade, nanofluidics has been established as a research field and gained increased interest in science and industry. Natural aqueous nanofluidic systems are very complex, there is often a predominance of liquid interfaces or the fluid contains charged or differently shaped colloids. The effects, promoted by these additives, are far from being completely understood and interesting questions arise with regards to the confinement of such complex fluidic systems. A systematic study of nanofluidic processes requires designing suitable experimental model nano - channels with required characteristics. The present work employed thin liquid films (TLFs) as experimental models. They have proven to be useful experimental tools because of their simple geometry, reproducible preparation, and controllable liquid interfaces. The thickness of the channels can be adjusted easily by the concentration of electrolyte in the film forming solution. This way, channel dimensions from 5 - 100 nm are possible, a high flexibility for an experimental system. TLFs have liquid IFs of different charge and properties and they offer the possibility to confine differently shaped ions and molecules to very small spaces, or to subject them to controlled forces. This makes the foam films a unique "device" available to obtain information about fluidic systems in nanometer dimensions. The main goal of this thesis was to study nanofluidic processes using TLFs as models, or tools, and to subtract information about natural systems plus deepen the understanding on physical chemical conditions. The presented work showed that foam films can be used as experimental models to understand the behavior of liquids in nano - sized confinement. In the first part of the thesis, we studied the process of thinning of thin liquid films stabilized with the non - ionic surfactant n - dodecyl - β - maltoside (β - C₁₂G₂) with primary interest in interfacial diffusion processes during the thinning process dependent on surfactant concentration 64. The surfactant concentration in the film forming solutions was varied at constant electrolyte (NaCl) concentration. The velocity of thinning was analyzed combining previously developed theoretical approaches. Qualitative information about the mobility of the surfactant molecules at the film surfaces was obtained. We found that above a certain limiting surfactant concentration the film surfaces were completely immobile and they behaved as non - deformable, which decelerated the thinning process. This follows the predictions for Reynolds flow of liquid between two non - deformable disks. In the second part of the thesis, we designed a TLF nanofluidic system containing rod - like multivalent ions and compared this system to films containing monovalent ions. We presented first results which recognized for the first time the existence of an additional attractive force in the foam films based on the electrostatic interaction between rod - like ions and oppositely charged surfaces. We may speculate that this is an ion bridging component of the disjoining pressure. The results show that for films prepared in presence of spermidine the transformation of the thicker CF to the thinnest NBF is more probable as films prepared with NaCl at similar conditions of electrostatic interaction. This effect is not a result of specific adsorption of any of the ions at the fluid surfaces and it does not lead to any changes in the equilibrium properties of the CF and NBF. Our hypothesis was proven using the trivalent ion Y3+ which does not show ion bridging. The experimental results are compared to theoretical predictions and a quantitative agreement on the system's energy gain for the change from CF to NBF could be obtained. In the third part of the work, the behavior of nanoparticles in confinement was investigated with respect to their impact on the fluid flow velocity. The particles altered the flow velocity by an unexpected high amount, so that the resulting changes in the dynamic viscosity could not be explained by a realistic change of the fluid viscosity. Only aggregation, flocculation and plug formation can explain the experimental results. The particle systems in the presented thesis had a great impact on the film interfaces due to the stabilizer molecules present in the bulk solution. Finally, the location of the particles with respect to their lateral and vertical arrangement in the film was studied with advanced reflectivity and scattering methods. Neutron Reflectometry studies were performed to investigate the location of nanoparticles in the TLF perpendicular to the IF. For the first time, we study TLFs using grazing incidence small angle X - ray scattering (GISAXS), which is a technique sensitive to the lateral arrangement of particles in confined volumes. This work provides preliminary data on a lateral ordering of particles in the film.},
  language  = {en}
}
@phdthesis{Bellin2006,
  author    = {Bellin, Ingo},
  title     = {Thermosensitive Polymer Networks with Two Different Shapes in Memory},
  address   = {Potsdam},
  pages     = {117 S. : graph. Darst.},
  year      = {2006},
  language  = {en}
}
@phdthesis{Henschel2023,
  author    = {Henschel, Cristiane},
  title     = {Thermoresponsive polymers with co-nonsolvency behavior},
  doi       = {10.25932/publishup-57716},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-577161},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 260},
  year      = {2023},
  abstract  = {Despite the popularity of thermoresponsive polymers, much is still unknown about their behavior, how it is triggered, and what factors influence it, hindering the full exploitation of their potential. One particularly puzzling phenomenon is called co-nonsolvency, in which a polymer is soluble in two individual solvents, but counter-intuitively becomes insoluble in mixtures of both. Despite the innumerous potential applications of such systems, including actuators, viscosity regulators and as carrier structures, this field has not yet been extensively studied apart from the classical example of poly(N isopropyl acrylamide) (PNIPAM) in mixtures of water and methanol. Therefore, this thesis focuses on evaluating how changes in the chemical structure of the polymers impact the thermoresponsive, aggregation and co-nonsolvency behaviors of both homopolymers and amphiphilic block copolymers. Within this scope, both the synthesis of the polymers and their characterization in solution is investigated. Homopolymers were synthesized by conventional free radical polymerization, whereas block copolymers were synthesized by consecutive reversible addition fragmentation chain transfer (RAFT) polymerizations. The synthesis of the monomers N isopropyl methacrylamide (NIPMAM) and N vinyl isobutyramide (NVIBAM), as well as a few chain transfer agents is also covered. Through turbidimetry measurements, the thermoresponsive and co-nonsolvency behavior of PNIPMAM and PNVIBAM homopolymers is then compared to the well-known PNIPAM, in aqueous solutions with 9 different organic co-solvents. Additionally, the effects of end-groups, molar mass, and concentration are investigated. Despite the similarity of their chemical structures, the 3 homopolymers show significant differences in transition temperatures and some divergences in their co-nonsolvency behavior. More complex systems are also evaluated, namely amphiphilic di- and triblock copolymers of PNIPAM and PNIPMAM with polystyrene and poly(methyl methacrylate) hydrophobic blocks. Dynamic light scattering is used to evaluate their aggregation behavior in aqueous and mixed aqueous solutions, and how it is affected by the chemical structure of the blocks, the chain architecture, presence of cosolvents and polymer concentration. The results obtained shed light into the thermoresponsive, co-nonsolvency and aggregation behavior of these polymers in solution, providing valuable information for the design of systems with a desired aggregation behavior, and that generate targeted responses to temperature and solvent mixture changes.},
  language  = {en}
}
@phdthesis{Nizardo2018,
  author    = {Nizardo, Noverra Mardhatillah},
  title     = {Thermoresponsive block copolymers with UCST-behavior aimed at biomedical environments},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-412217},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 134},
  year      = {2018},
  abstract  = {Thermoresponsive block copolymers of presumably highly biocompatible character exhibiting upper critical solution temperature (UCST) type phase behavior were developed. In particular, these polymers were designed to exhibit UCST-type cloud points (Tcp) in physiological saline solution (9 g/L) within the physiologically interesting window of 30-50°C. Further, their use as carrier for controlled release purposes was explored. Polyzwitterion-based block copolymers were synthesized by atom transfer radical polymerization (ATRP) via a macroinitiator approach with varied molar masses and co-monomer contents. These block copolymers can self-assemble in the amphiphilic state to form micelles, when the thermoresponsive block experiences a coil-to-globule transition upon cooling. Poly(ethylene glycol) methyl ether (mPEG) was used as the permanently hydrophilic block to stabilize the colloids formed, and polyzwitterions as the thermoresponsive block to promote the temperature-triggered assembly-disassembly of the micellear aggregates at low temperature. Three zwitterionic monomers were used for this studies, namely 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate (SPE), 4-((2-(methacryloyl- oxy)ethyl)dimethylammonio)butane-1-sulfonate (SBE), and 3-((2-(methacryloyloxy)ethyl)- dimethylammonio)propane-1-sulfate) (ZPE). Their (co)polymers were characterized with respect to their molecular structure by proton nuclear magnetic resonance (1H-NMR) and gel permeation chromatography (GPC). Their phase behaviors in pure water as well as in physiological saline were studied by turbidimetry and dynamic light scattering (DLS). These (co)polymers are thermoresponsive with UCST-type phase behavior in aqueous solution. Their phase transition temperatures depend strongly on the molar masses and the incorporation of co-monomers: phase transition temperatures increased with increasing molar masses and content of poorly water-soluble co-monomer. In addition, the presence of salt influenced the phase transition dramatically. The phase transition temperature decreased with increasing salt content in the solution. While the PSPE homopolymers show a phase transition only in pure water, the PZPE homopolymers are able to exhibit a phase transition only in high salinity, as in physiological saline. Although both polyzwitterions have similar chemical structures that differ only in the anionic group (sulfonate group in SPE and sulfate group in ZPE), the water solubility is very different. Therefore, the phase transition temperatures of targeted block copolymers were modulated by using statistical copolymer of SPE and ZPE as thermoresponsive block, and varying the ratio of SPE to ZPE. Indeed, the statistical copolymers of P(SPE-co-ZPE) show phase transitions both in pure water as well as in physiological saline. Surprisingly, it was found that mPEG-b-PSBE block copolymer can display "schizophrenic" behavior in pure water, with the UCST-type cloud point occurring at lower temperature than the LCST-type one. The block copolymer, which satisfied best the boundary conditions, is block copolymer mPEG114-b-P(SPE43-co-ZPE39) with a cloud point of 45°C in physiological saline. Therefore, it was chosen for solubilization studies of several solvatochromic dyes as models of active agents, using the thermoresponsive block copolymer as "smart" carrier. The uptake and release of the dyes were explored by UV-Vis and fluorescence spectroscopy, following the shift of the wavelength of the absorbance or emission maxima at low and high temperature. These are representative for the loaded and released state, respectively. However, no UCST-transition triggered uptake and release of these dyes could be observed. Possibly, the poor affinity of the polybetaines to the dyes in aqueous environtments may be related to the widely reported antifouling properties of zwitterionic polymers.},
  language  = {en}
}
@phdthesis{Mucic2012,
  author    = {Mucic, Nenad},
  title     = {Thermodynamics, kinetics and rheology of surfactant adsorption layers at water/oil interfaces},
  address   = {Potsdam},
  year      = {2012},
  language  = {en}
}
@phdthesis{Johann2001,
  author    = {Johann, Robert},
  title     = {Thermodynamic, morphological and structural properties of dissociated fatty acid monolayers at the air-water interface},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000050},
  school      = {Universit{\"a}t Potsdam},
  year      = {2001},
  abstract  = {Untersuchungen an Monoschichten amphiphiler Lipide auf w{\"a}ssriger L{\"o}sung sind in der Grenzfl{\"a}chenforschung von grundlegender Bedeutung. Aufgrund der Anwendbarkeit zahlreicher analytischer Methoden sind schwimmende unl{\"o}sliche Monoschichten als Modellsysteme sehr geeignet, um Ordnung und Strukturbildung sowie den Transport von Materie in zwei Dimensionen oder die Wechselwirkung von Molek{\"u}len an der Grenzfl{\"a}che mit Teilchen in L{\"o}sung (Stichwort \“molekulare Erkennung\”) zu studieren. Aus dem Verhalten von Monoschichten lassen sich z. B. R{\"u}ckschl{\"u}sse ziehen auf die Eigenschaften von Lipidschichten auf festen Substraten oder in biologischen Membranen. Diese Arbeit befasst sich mit spezifischen und fundamentalen Wechselwirkungen in Monoschichten sowohl auf molekularer als auch auf mikroskopischer Ebene und deren Beziehung zu Gitterstruktur, Aussehen und thermodynamischem Verhalten von Monoschichten an der Wasser/Luft Grenzfl{\"a}che. Als Modellsystem werden haupts{\"a}chlich Monoschichten langkettiger Fetts{\"a}uren verwendet, da in ihnen die molekularen Wechselwirkungen durch {\"A}nderung des Subphasen-pH-Werts {\"u}ber den Dissoziationsgrad gezielt und schrittweise ver{\"a}ndert werden k{\"o}nnen. Ausser {\"u}ber die Subphasenzusammensetzung werden die molekularen Wechselwirkungen auch {\"u}ber die Temperatur und die Monoschichtzusammensetzung systematisch variiert. Mit Hilfe von Isothermen- und Oberfl{\"a}chenpotentialmessungen, Brewsterwinkel-Mikroskopie, R{\"o}ntgenbeugung unter streifendem Einfall und polarisationsmodulierter Infrarot-Reflexions-Absorptions-Spektroskopie wird die {\"A}nderung der Monoschichteigenschaften als Funktion eines {\"a}usseren Parametern analysiert. Dabei werden aus den R{\"o}ntgenbeugungsdaten quantitative Masse f{\"u}r die molekularen Wechselwirkungen und f{\"u}r die Kettenkonformationsordnung in Monoschichten abgeleitet. Zu den interessantesten Ergebnissen dieser Arbeit z{\"a}hlen die Aufkl{\"a}rung des Ursprungs von regelm{\"a}ssigen polygonalen und dendritischen Dom{\"a}nenformen, die vielf{\"a}ltige Wirkung von Cholesterin auf die Molek{\"u}lpackung und Gitterordnung langkettiger Amphiphile, sowie die Entdeckung einer abrupten {\"A}nderung in den Kopfgruppenbindungswechselwirkungen, der Kettenkonformationsordnung und des Phasen{\"u}bergangsdrucks zwischen geneigten Monoschichtphasen in Fetts{\"a}uremonoschichten nahe pH 9. Zur Deutung des letzten Punkts wird ein Modell f{\"u}r die Kopfgruppenbindungsstruktur von Fetts{\"a}uremonoschichten als Funktion des pH-Werts entwickelt.},
  subject      = {Wasseroberfl{\"a}che},
  language  = {en}
}
@phdthesis{Muzdalo2017,
  author    = {Muzdalo, Anja},
  title     = {Thermal cis-trans isomerization of azobenzene studied by path sampling and QM/MM stochastic dynamics},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-405814},
  school      = {Universit{\"a}t Potsdam},
  pages     = {144},
  year      = {2017},
  abstract  = {Azobenzene-based molecular photoswitches have extensively been applied to biological systems, involving photo-control of peptides, lipids and nucleic acids. The isomerization between the stable trans and the metastable cis state of the azo moieties leads to pronounced changes in shape and other physico-chemical properties of the molecules into which they are incorporated. Fast switching can be induced via transitions to excited electronic states and fine-tuned by a large number of different substituents at the phenyl rings. But a rational design of tailor-made azo groups also requires control of their stability in the dark, the half-lifetime of the cis isomer. In computational chemistry, thermally activated barrier crossing on the ground state Born-Oppenheimer surface can efficiently be estimated with Eyring's transition state theory (TST) approach; the growing complexity of the azo moiety and a rather heterogeneous environment, however, may render some of the underlying simplifying assumptions problematic. In this dissertation, a computational approach is established to remove two restrictions at once: the environment is modeled explicitly by employing a quantum mechanical/molecular mechanics (QM/MM) description; and the isomerization process is tracked by analyzing complete dynamical pathways between stable states. The suitability of this description is validated by using two test systems, pure azo benzene and a derivative with electron donating and electron withdrawing substituents ("push-pull" azobenzene). Each system is studied in the gas phase, in toluene and in polar DMSO solvent. The azo molecules are treated at the QM level using a very recent, semi-empirical approximation to density functional theory (density functional tight binding approximation). Reactive pathways are sampled by implementing a version of the so-called transition path sampling method (TPS), without introducing any bias into the system dynamics. By analyzing ensembles of reactive trajectories, the change in isomerization pathway from linear inversion to rotation in going from apolar to polar solvent, predicted by the TST approach, could be verified for the push-pull derivative. At the same time, the mere presence of explicit solvation is seen to broaden the distribution of isomerization pathways, an effect TST cannot account for. Using likelihood maximization based on the TPS shooting history, an improved reaction coordinate was identified as a sine-cosine combination of the central bend angles and the rotation dihedral, r (ω,α,α′). The computational van't Hoff analysis for the activation entropies was performed to gain further insight into the differential role of solvent for the case of the unsubstituted and the push-pull azobenzene. In agreement with the experiment, it yielded positive activation entropies for azobenzene in the DMSO solvent while negative for the push-pull derivative, reflecting the induced ordering of solvent around the more dipolar transition state associated to the latter compound. Also, the dynamically corrected rate constants were evaluated using the reactive flux approach where an increase comparable to the experimental one was observed for a high polarity medium for both azobenzene derivatives.},
  language  = {en}
}
@phdthesis{TzonevaVelinova2003,
  author    = {Tzoneva-Velinova, Rumiana},
  title     = {The wettability of biomaterials determines the protein adsorption and the cellular responses},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001103},
  school      = {Universit{\"a}t Potsdam},
  year      = {2003},
  abstract  = {During the past several decades polymer materials become widely used as components of medical devices and implants such as hemodialysers, bioartificial organs as well as vascular and recombinant surgery. Most of the devices cannot avoid the blood contact in their use. When the polymer materials come in contact with blood they can cause different undesired host responses like thrombosis, inflammatory reactions and infections. Thus the materials must be hemocompatible in order to minimize these undesired body responses. The earliest and one of the main problems in the use of blood-contacting biomaterials is the surface induced thrombosis. The sequence of the thrombus formation on the artificial surfaces has been well established. The first event, which occurs, after exposure of biomaterials to blood, is the adsorption of blood proteins. Surface physicochemical properties of the materials as wettability greatly influence the amount and conformational changes of adsorbed proteins. In turn the type, amount and conformational state of the adsorbed protein layer determines whether platelets will adhere and become activated or not on the artificial surface and thus to complete the thrombus formation. The adsorption of fibrinogen (FNG), which is present in plasma, has been shown to be closely related to surface induced thrombosis by participating in all processes of the thrombus formation such as fibrin formation, platelet adhesion and aggregation. Therefore study the FNG adsorption to artificial surfaces could contribute to better understanding of the mechanisms of platelet adhesion and activation and thus to controlling the surface induced thrombosis. Endothelization of the polymer surfaces is one of the strategies for improving the materials hemocompatibility, which is believed to be the most ideal solution for making truly blood-compatible materials. Since at physiological conditions proteins such as FNG and fibronectin (FN) are the usual extracellular matrix (ECM) for endothelial cells (EC) adhesion, precoating of the materials with these proteins has been shown to improve EC adhesion and growth in vitro. ECM proteins play an essential role not only like a structural support for cell adhesion and spreading, but also they are important factor in transmitting signals for different cell functions. The ability of cells to remodel plasma proteins such as FNG and FN in matrix-like structures together with the classical cell parameters such as actin cytoskeleton and focal adhesion formation could be used as an criteria for proper cell functioning. The establishment and the maintaining of delicate balance between cell-cell and cell-substrate contacts is another important factor for better EC colonization of the implants. The functionality of newly established endothelium in order to produce antithromotic substances should be always considered when EC seeding is used for improving the hemocompatibility of the polymer materials. Controlling the polymer surface properties such as surface wettability represents a versatile approach to manipulate the above cellular responses and therefore can be used in biomaterial and tissue engineering applications for producing better hemocompatible materials.},
  language  = {en}
}
@phdthesis{Rohrmann2013,
  author    = {Rohrmann, Johannes},
  title     = {The transcription factors orchestra of ripening tomato fruits},
  address   = {Potsdam},
  pages     = {Ix, 136 S. + 1 CD-Rom},
  year      = {2013},
  language  = {en}
}
@phdthesis{Mertoglu2004,
  author    = {Mertoglu, Murat},
  title     = {The synthesis of well-defined functional homo- and block copolymers in aqueous media via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-2338},
  school      = {Universit{\"a}t Potsdam},
  year      = {2004},
  abstract  = {New chain transfer agents based on dithiobenzoate and trithiocarbonate for free radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT) were synthesized. The new compounds bear permanently hydrophilic sulfonate moieties which provide solubility in water independent of the pH. One of them bears a fluorophore, enabling unsymmetrical double end group labelling as well as the preparation of fluorescent labeled polymers. Their stability against hydrolysis in water was studied, and compared with the most frequently employed water-soluble RAFT agent 4-cyano-4-thiobenzoylsulfanylpentanoic acid dithiobenzoate, using UV-Vis and 1H-NMR spectroscopy. An improved resistance to hydrolysis was found for the new RAFT agents, providing good stabilities in the pH range between 1 and 8, and up to temperatures of 70°C. Subsequently, a series of non-ionic, anionic and cationic water-soluble monomers were polymerized via RAFT in water. In these experiments, polymerizations were conducted either at 48°C or 55°C, that are lower than the conventionally employed temperatures (>60°C) for RAFT in organic solvents, in order to minimize hydrolysis of the active chain ends (e.g. dithioester and trithiocarbonate), and thus to obtain good control over the polymerization. Under these conditions, controlled polymerization in aqueous solution was possible with styrenic, acrylic and methacrylic monomers: molar masses increase with conversion, polydispersities are low, and the degree of end group functionalization is high. But polymerizations of methacrylamides were slow at temperatures below 60°C, and showed only moderate control. The RAFT process in water was also proved to be a powerful method to synthesize di- and triblock copolymers including the preparation of functional polymers with complex structure, such as amphiphilic and stimuli-sensitive block copolymers. These include polymers containing one or even two stimuli-sensitive hydrophilic blocks. The hydrophilic character of a single or of several blocks was switched by changing the pH, the temperature or the salt content, to demonstrate the variability of the molecular designs suited for stimuli-sensitive polymeric amphiphiles, and to exemplify the concept of multiple-sensitive systems. Furthermore, stable colloidal block ionomer complexes were prepared by mixing anionic surfactants in aqueous media with a double hydrophilic block copolymer synthesized via RAFT in water. The block copolymer is composed of a noncharged hydrophilic block based on polyethyleneglycol and a cationic block. The complexes prepared with perfluoro decanoate were found so stable that they even withstand dialysis; notably they do not denaturate proteins. So, they are potentially useful for biomedical applications in vivo.},
  language  = {en}
}
@phdthesis{Skrabania2008,
  author    = {Skrabania, Katja},
  title     = {The multifarious self-assembly of triblock copolymers : from multi-responsive polymers and multi-compartment micelles},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-30764},
  school      = {Universit{\"a}t Potsdam},
  year      = {2008},
  abstract  = {New ABC triblock copolymers were synthesized by controlled free-radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT). Compared to amphiphilic diblock copolymers, the prepared materials formed more complex self-assembled structures in water due to three different functional units. Two strategies were followed: The first approach relied on double-thermoresponsive triblock copolymers exhibiting Lower Critical Solution Temperature (LCST) behavior in water. While the first phase transition triggers the self-assembly of triblock copolymers upon heating, the second one allows to modify the self-assembled state. The stepwise self-assembly was followed by turbidimetry, dynamic light scattering (DLS) and 1H NMR spectroscopy as these methods reflect the behavior on the macroscopic, mesoscopic and molecular scale. Although the first phase transition could be easily monitored due to the onset of self-assembly, it was difficult to identify the second phase transition unambiguously as the changes are either marginal or coincide with the slow response of the self-assembled system to relatively fast changes of temperature. The second approach towards advanced polymeric micelles exploited the thermodynamic incompatibility of "triphilic" block copolymers - namely polymers bearing a hydrophilic, a lipophilic and a fluorophilic block - as the driving force for self-assembly in water. The self-assembly of these polymers in water produced polymeric micelles comprising a hydrophilic corona and a microphase-separated micellar core with lipophilic and fluorophilic domains - so called multi-compartment micelles. The association of triblock copolymers in water was studied by 1H NMR spectroscopy, DLS and cryogenic transmission electron microscopy (cryo-TEM). Direct imaging of the polymeric micelles in solution by cryo-TEM revealed different morphologies depending on the block sequence and the preparation conditions. While polymers with the sequence hydrophilic-lipophilic-fluorophilic built core-shell-corona micelles with the core being the fluorinated compartment, block copolymers with the hydrophilic block in the middle formed spherical micelles where single or multiple fluorinated domains "float" as disks on the surface of the lipophilic core. Increasing the temperature during micelle preparation or annealing of the aqueous solutions after preparation at higher temperatures induced occasionally a change of the micelle morphology or the particle size distribution. By RAFT polymerization not only the desired polymeric architectures could be realized, but the technique provided in addition a precious tool for molar mass characterization. The thiocarbonylthio moieties, which are present at the chain ends of polymers prepared by RAFT, absorb light in the UV and visible range and were employed for end-group analysis by UV-vis spectroscopy. A variety of dithiobenzoate and trithiocarbonate RAFT agents with differently substituted initiating R groups were synthesized. The investigation of their absorption characteristics showed that the intensity of the absorptions depends sensitively on the substitution pattern next to the thiocarbonylthio moiety and on the solvent polarity. According to these results, the conditions for a reliable and convenient end-group analysis by UV-vis spectroscopy were optimized. As end-group analysis by UV-vis spectroscopy is insensitive to the potential association of polymers in solution, it was advantageously exploited for the molar mass characterization of the prepared amphiphilic block copolymers.},
  language  = {en}
}
@phdthesis{Kuhrts,
  author    = {Kuhrts, Lucas},
  title     = {The effect of Polycations on the Formation of Magnetite Nanoparticles},
  address   = {Potsdam},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VIII, 99},
  abstract  = {Nanoparticles of magnetite (Fe3O4) are envisioned to find used in diverse applications, ranging from magnetic data storage, inks, ferrofluids as well as in magnetic resonance imaging, drug delivery, and hyperthermia cancer treatment. Their magnetic properties strongly depend on their size and morphology, two properties that can be synthetically controlled. Achieving appropriate control under soft chemical conditions has so far remained a challenging endeavor. One proven way of exerting this desired control has been using a biomimetic approach that emulates the proteome of magnetotactic bacteria by adding poly-L-arginine in the co- precipitation of ferrous and ferric chloride. The objective of the work presented here is to understand the impact of this polycation on the formation mechanism of magnetite and, through rational design, to enhance the control we can exert on magnetite nanoparticle size and morphology. We developed a SAXS setup to temporally and structurally resolve the formation of magnetite in the presence of poly-L-arginine in situ. Using analytical scattering models, we were able to separate the scattering contribution of a low-density 5 nm iron structure from the contribution of the growing nanoparticles. We identified that the low-density iron structure is a metastable precursor to the magnetite particles and that it is electrostatically stabilized by poly-L-arginine. In a process analogous to biomineralization, the presence of the charged macromolecule thus shifts the reaction mechanism from a thermodynamically controlled one to a kinetically controlled one. We identify this shift in reactions mechanism as the cornerstone of the proposed mechanism and as the crucial step in the paradigm of this extraordinary nanoparticle morphology and size control. Based on SAXS data, theoretical considerations suggest that an observed morphological transition between spherical, solid, and sub-structured mesocrystalline magnetite nanoparticles is induced through a pH-driven change in the wettability of the nanoparticle surface. With these results, we further demonstrate that SAXS can be an invaluable tool for investigating nanoparticle formation. We were able to change particle morphology from spherically solid particles to sub-structured mesocrystals merely by changing the precipitation pH. Improving the synthesis sustainability by substituting poly-L-arginine with renewable, polysaccharide-based polycations produced at the metric ton scale, we demonstrated that the ability to alter the reaction mechanism of magnetite can be generically attributed to the presence of polycations. Through meticulous analysis and the understanding of the formation mechanism, we were able to exert precise control over particle size and morphology, by adapting crucial synthesis parameters. We were thus able to grow mesocrystals up to 200 nm and solid nanocrystals of 100 nm by adding virtually any strong polycation. We further found a way to produce stable single domain magnetite at only slightly increased alkalinity, as magnetotactic bacteria do it. Thus through the understanding of the biological system, the consecutive biomimetic synthesis of magnetite and the following understanding of the mechanism involved in the in vitro synthesis, we managed to improve the synthetic control over the co-precipitation of magnetite, coming close biomineralization of magnetite in magnetotactic bacteria. Polyanions, in both natural as well as in synthetic systems, have been in the spotlight of recent research, yet our work shows the pivotal influence polycations have on the nucleation of magnetite. This work will contribute significantly to our ability to tailor magnetite nanoparticle size and morphology; in addition, we presume it will provide us with a model system for studying biomineralization of magnetite in vitro, putting the spotlight on the important influence of polycations, which have not had the scientific attention they deserve.},
  language  = {en}
}
@phdthesis{Flatken2022,
  author    = {Flatken, Marion A.},
  title     = {The early stages of halide perovskites thin film formation},
  doi       = {10.25932/publishup-55259},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-552599},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VI, 144},
  year      = {2022},
  abstract  = {As climate change worsens, there is a growing urgency to promote renewable energies and improve their accessibility to society. Here, solar energy harvesting is of particular importance. Currently, metal halide perovskite (MHP) solar cells are indispensable in future solar energy generation research. MHPs are crystalline semiconductors increasingly relevant as low-cost, high-performance materials for optoelectronics. Their processing from solution at low temperature enables easy fabrication of thin film elements, encompassing solar cells and light-emitting diodes or photodetectors. Understanding the coordination chemistry of MHPs in their precursor solution would allow control over the thin film crystallization, the material properties and the final device performance. In this work, we elaborate on the key parameters to manipulate the precursor solution with the long-term objective of enabling systematic process control. We focus on the nanostructural characterization of the initial arrangements of MHPs in the precursor solutions. Small-angle scattering is particularly well suited for measuring nanoparticles in solution. This technique proved to be valuable for the direct analyzes of perovskite precursor solutions in standard processing concentrations without causing radiation damage. We gain insights into the chemical nature of widely used precursor structures such as methylammonium lead iodide (MAPbI3), presenting first insights into the complex arrangements and interaction within this precursor state. Furthermore, we transfer the preceding results to other more complex perovskite precursors. The influence of compositional engineering is investigated using the addition of alkali cations as an example. As a result, we propose a detailed working mechanism on how the alkali cations suppress the formation of intermediate phases and improve the quality of the crystalline thin film. In addition, we investigate the crystallization process of a tin-based perovskite composition (FASnI3) under the influence of fluoride chemistry. We prove that the frequently used additive, tin fluoride (SnF2), selectively binds undesired oxidized tin (Sn(IV)) in the precursor solution. This prevents its incorporation into the actual crystal structure and thus reduces the defect density of the material. Furthermore, SnF2 leads to a more homogeneous crystal growth process, which results in improved crystal quality of the thin film material. In total, this study provides a detailed characterization of the complex system of perovskite precursor chemistry. We thereby cover relevant parameters for future MHP solar cell process control, such as (I) the environmental impact based on concentration and temperature (II) the addition of counter ions to reduce the diffuse layer surrounding the precursor nanostructures and (III) the targeted use of additives to eliminate unwanted components selectively and to ensure a more homogeneous crystal growth.},
  language  = {en}
}
@phdthesis{Kirchhofer2021,
  author    = {Kirchhofer, Tabea},
  title     = {The development of multi - compartmentalised systems for the directed organisation of artificial cells},
  doi       = {10.25932/publishup-52842},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-528428},
  school      = {Universit{\"a}t Potsdam},
  pages     = {II, 126},
  year      = {2021},
  abstract  = {Membrane contact sites are of particular interest in the field of synthetic biology and biophysics. They are involved in a great variety of cellular functions. They form in between two cellular organelles or an organelle and the plasma membrane in order to establish a communication path for molecule transport or signal transmission. The development of an artificial membrane system which can mimic membrane contact sites using bottom up synthetic biology was the goal of this research study. For this, a multi - compartmentalised giant unilamellar vesicle (GUV) system was created with the membrane of the outer vesicle mimicking the plasma membrane and the inner GUVs posing as cellular organelles. In the following steps, three different strategies were used to achieve an internal membrane - membrane adhesion.},
  language  = {en}
}
@phdthesis{Winter2013,
  author    = {Winter, Alette},
  title     = {Tetrahalidocuprat(II)-komplexe : Untersuchungen zur Relation von Struktur- und EPR-Parametern},
  address   = {Potsdam},
  pages     = {XVII, 103, LVII S.},
  year      = {2013},
  language  = {de}
}
@phdthesis{Schmidt2009,
  author    = {Schmidt, Johannes},
  title     = {Templatfreie Synthese funktionaler mikropor{\"o}ser Polymernetzwerke},
  address   = {Potsdam},
  pages     = {109 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@phdthesis{Koehler2006,
  author    = {K{\"o}hler, Karen},
  title     = {Temperature-induced rearrangements of polyelectrolyte multilayer capsules : mechanisms and applications},
  address   = {Potsdam},
  pages     = {XV, 118, B S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {en}
}
@phdthesis{Berthold2017,
  author    = {Berthold, Thomas},
  title     = {Tannine f{\"u}r nachhaltige und funktionale Kohlenstoffmaterialien},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407564},
  school      = {Universit{\"a}t Potsdam},
  pages     = {85, xlvi},
  year      = {2017},
  abstract  = {In Zeiten eines sich schnell {\"a}ndernden und vielseitigen Energiemarktes m{\"u}ssen Kohlenstoffmaterialien f{\"u}r verschiedene Anforderungen einsetzbar sein. Dies erfordert flexibel synthetisierbare Kohlenstoffmaterialien bevorzugt aus g{\"u}nstigen und nachhaltigen Kohlenstoffquellen. Es ist allerdings nicht leicht Vorl{\"a}uferverbindungen auszumachen, welche sich einerseits f{\"u}r verschiedene Herstellungsverfahren eignen und deren Kohlenstoffprodukte andererseits in spezifischen Eigenschaften, wie der Struktur, des Stickstoffanteils, der Oberfl{\"a}che und der Porengr{\"o}ßen, eingestellt werden k{\"o}nnen. In diesem Zusammenhang k{\"o}nnen nat{\"u}rliche Polyphenole, etwa {\"u}bersch{\"u}ssige Tannine aus der Weinproduktion, eine neue Welt zu hoch funktionalen und vielseitig einstellbaren Kohlenstoffmaterialien mit hohen Ausbeuten {\"o}ffnen. Das Hauptziel dieser vorliegenden Thesis war es neue funktionale, einstellbare und skalierbare nanostrukturierte Kohlenstoffmaterialien aus Tanninen (insbesondere Tannins{\"a}ure) f{\"u}r unterschiedliche elektrochemische Zwecke zu synthetisieren und zu charakterisieren. Erm{\"o}glicht wurde dies durch unterschiedliche synthetische Herangehensweisen, wie etwa der polymeren Strukturdirektion, dem ionothermalen Templatieren und der weichen Templatierung. An Stelle des weitl{\"a}ufig gebr{\"a}uchlichen, aber kanzerogenen Vernetzungsagens Formaldehyd wurden bei den vorgestellten Synthesen Harnstoff und Thioharnstoff gew{\"a}hlt, um zugleich die synthetisierten Kohlenmaterialien variabel dotieren zu k{\"o}nnen. Daher wurden im ersten Teil der Arbeit die Wechselwirkungen, Reaktionen und thermischen Verhaltensweisen von Tannins{\"a}ure und Mixturen von Tannins{\"a}ure und Harnstoff bzw. Thioharnstoff untersucht, um daraus wichtige Erkenntnisse f{\"u}r die verschiedenen Kohlenstoffsynthesen zu gewinnen. Durch die Verwendung eines polymeren Strukturierungsagenz Pluronic P123 konnten in einer ersten Kohlenstoffsynthese nachhaltige und dotierbare Kohlenstoffpartikel mit Durchmessern im Nanometerbereich aus Tannins{\"a}ure und Harnstoff hergestellt werden. Es konnte dabei gezeigt werden, dass durch die Modifikation der verschiedenen Syntheseparameter die Kohlenstoffnanopartikel gem{\"a}ß ihres gemittelten Partikeldurchmessers, ihrer BET-Oberfl{\"a}che, ihrer Komposition, ihrer Leitf{\"a}higkeit und ihrer chemischen Stabilit{\"a}t einstellbar sind. Dies er{\"o}ffnete die M{\"o}glichkeit diese Kohlenstoffpartikel als alternatives und nachhaltiges Rußmaterial einzusetzen. Weiterhin war es durch die ionothermale Templatierung m{\"o}glich por{\"o}se, dotierte und kontrollierbare Kohlenstoffpartikel mit hohen spezifischen Oberfl{\"a}chen aus den gew{\"a}hlten Pr{\"a}kursorverbindungen zu synthetisieren, die sich f{\"u}r den Einsatz in Superkondensatoren eignen. Auf diesen Erkenntnissen aufbauend konnten mittels der Rotationsbeschichtung por{\"o}se binderfreie und strukturierte Kohlenstofffilme synthetisiert werden, die eine spinodale Struktur aufwiesen. Anhand der Modifikation der Stamml{\"o}sungskonzentration, der Rotationsgeschwindigkeit und der verwendeten Substrate konnten die Filmdicke (100-1000 nm), die Morphologie und Gesamtoberfl{\"a}che gezielt beeinflusst werden. Die erweiterte elektrochemische Analyse zeigte außerdem ein sehr gut zug{\"a}ngliches Porensystem der por{\"o}sen Kohlenstofffilme. Allumfassend konnten demnach verschiedene Synthesewege f{\"u}r Kohlenstoffmaterialien aus Tanninen aufgezeigt werden, die verschiedenartig strukturiert und kontrolliert werden k{\"o}nnen und sich f{\"u}r diverse Anwendungsgebiete eignen.},
  language  = {de}
}
@phdthesis{Jiang2019,
  author    = {Jiang, Yi},
  title     = {Tailoring surface functions of micro/nanostructured polymeric substrates by thermo-mechanical treatments},
  school      = {Universit{\"a}t Potsdam},
  pages     = {93},
  year      = {2019},
  language  = {en}
}
@phdthesis{Kleineidam2010,
  author    = {Kleineidam, Anja Melanie},
  title     = {Sythese und Verhalten von abbaubaren Fluortensiden},
  address   = {Potsdam},
  pages     = {X [XI], 155 Bl. : graph. Darst.},
  year      = {2010},
  language  = {de}
}
@phdthesis{Fechner2011,
  author    = {Fechner, Mabya},
  title     = {Synthetische Polyampholyte als pH-sensitive Komponente in selbstorganisierten Systemen zur Nanostrukturierung von Materialien},
  address   = {Potsdam},
  pages     = {VI, 128, XLIII S.},
  year      = {2011},
  language  = {de}
}
@phdthesis{Federico2011,
  author    = {Federico, Stefania},
  title     = {Synthetic peptides derived from decorin as building blocks for biomaterials based on supramolecular interactions},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59661},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In this work, the development of a new molecular building block, based on synthetic peptides derived from decorin, is presented. These peptides represent a promising basis for the design of polymer-based biomaterials that mimic the ECM on a molecular level and exploit specific biological recognition for technical applications. Multiple sequence alignments of the internal repeats of decorin that formed the inner and outer surface of the arch-shaped protein were used to develop consensus sequences. These sequences contained conserved sequence motifs that are likely to be related to structural and functional features of the protein. Peptides representative for the consensus sequences were synthesized by microwave-assisted solid phase peptide synthesis and purified by RP-HPLC, with purities higher than 95 mol\%. After confirming the desired masses by MALDI-TOF-MS, the primary structure of each peptide was investigated by 1H and 2D NMR, from which a full assignment of the chemical shifts was obtained. The characterization of the peptides conformation in solution was performed by CD spectroscopy, which demonstrated that using TFE, the peptides from the outer surface of decorin show a high propensity to fold into helical structures as observed in the original protein. To the contrary, the peptides from the inner surface did not show propensity to form stable secondary structure. The investigation of the binding capability of the peptides to Collagen I was performed by surface plasmon resonance analyses, from which all but one of the peptides representing the inner surface of decorin showed binding affinity to collagen with values of dissociation constant between 2•10-7 M and 2.3•10-4 M. On the other hand, the peptides representative for the outer surface of decorin did not show any significant interaction to collagen. This information was then used to develop experimental demonstration for the binding capabilities of the peptides from the inner surface of decorin to collagen even when used in more complicated situations close to possible appications. With this purpose, the peptide (LRELHLNNN) which showed the highest binding affinity to collagen (2•10-7 M) was functionalized with an N-terminal triple bond in order to obtain a peptide dimer via copper(I)-catalyzed cycloaddition reaction with 4,4'-diazidostilbene-2,2'-disulfonic acid. Rheological measurements showed that the presence of the peptide dimer was able to enhance the elastic modulus (G') of a collagen gel from ~ 600 Pa (collagen alone) to ~ 2700 Pa (collagen and peptide dimer). Moreover, it was shown that the mechanical properties of a collagen gel can be tailored by using different molar ratios of peptide dimer respect to collagen. The same peptide, functionalized with the triple bond, was used to obtain a peptide-dye conjugate by coupling it with N-(5'-azidopentanoyl)-5-aminofluorescein. An aqueous solution (5 vol\% methanol) of the peptide dye conjugate was injected into a collagen and a hyaluronic acid (HA) gel and images of fluorescence detection showed that the diffusion of the peptide was slower in the collagen gel compared to the HA gel. The third experimental demonstration was gained using the peptide (LSELRLHNN) which showed the lower binding affinity (2.3•10-4 M) to collagen. This peptide was grafted to hyaluronic acid via EDC-chemistry, with a degree of functionalization of 7 ± 2 mol\% as calculated by 1H-NMR. The grafting was further confirmed by FTIR and TGA measurements, which showed that the onset of decomposition for the HA-g-peptide decreased by 10 °C compared to the native HA. Rheological measurements showed that the elastic modulus of a system based on collagen and HA-g-peptide increased by almost two order of magnitude (G' = 200 Pa) compared to a system based on collagen and HA (G' = 0.9 Pa). Overall, this study showed that the synthetic peptides, which were identified from decorin, can be applied as potential building blocks for biomimetic materials that function via biological recognition.},
  language  = {en}
}
@phdthesis{DemirCakan2009,
  author    = {Demir-Cakan, Rezan},
  title     = {Synthesis, characterization and applications of nanostructured materials using hydrothermal carbonization},
  address   = {Potsdam},
  pages     = {IV, 126 Bl. : Ill., graph. Darst.},
  year      = {2009},
  language  = {en}
}
@phdthesis{Tan2018,
  author    = {Tan, Li},
  title     = {Synthesis, assembly and thermo-responsivity of polymer-functionalized magnetic cobalt nanoparticles},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418153},
  school      = {Universit{\"a}t Potsdam},
  pages     = {X, 111},
  year      = {2018},
  abstract  = {This thesis mainly covers the synthesis, surface modification, magnetic-field-induced assembly and thermo-responsive functionalization of superparamagnetic Co NPs initially stabilized by hydrophobic small molecules oleic acid (OA) and trioctylphosphine oxide (TOPO), as well as the synthesis of both superparamagnetic and ferromagnetic Co NPs by using end-functionalized-polystyrene as stabilizer. Co NPs, due to their excellent magnetic and catalytic properties, have great potential application in various fields, such as ferrofluids, catalysis, and magnetic resonance imaging (MRI). Superparamagnetic Co NPs are especially interesting, since they exhibit zero coercivity. They get magnetized in an external magnetic field and reach their saturation magnetization rapidly, but no magnetic moment remains after removal of the applied magnetic field. Therefore, they do not agglomerate in the body when they are used in biomedical applications. Normally, decomposition of metallic precursors at high temperature is one of the most important methods in preparation of monodisperse magnetic NPs, providing tunability in size and shape. Hydrophobic ligands like OA, TOPO and oleylamine are often used to both control the growth of NPs and protect them from agglomeration. The as-prepared magnetic NPs can be used in biological applications as long as they are transferred into water. Moreover, their supercrystal assemblies have the potential for high density data storage and electronic devices. In addition to small molecules, polymers can also be used as surfactants for the synthesis of ferromagnetic and superparamagnetic NPs by changing the reaction conditions. Therefore, chapter 2 gives an overview on the basic concept of synthesis, surface modification and self-assembly of magnetic nanoparticles. Various examples were used to illustrate the recent work. The hydrophobic Co NPs synthesized with small molecules as surfactants limit their biological applications, which require a hydrophilic or aqueous environment. Surface modification (e.g., ligand exchange) is a general idea for either phase transition or surface-functionalization. Therefore, in chapter 3, a ligand exchange process was conducted to functionalize the surface of Co NPs. PNIPAM is one of the most popular smart polymers and its lower critical solution temperature (LCST) is around 32 °C, with a reversible change in the conformation structure between hydrophobic and hydrophilic. The novel nanocomposites of superparamagnetic Co NPs and thermo-responsive PNIPAM are of great interest. Thus, well-defined superparamagnetic Co NPs were firstly synthesized through the thermolysis of cobalt carbonyl by using OA and TOPO as surfactants. A functional ATRP initiator, containing an amine (as anchoring group) and a 2-bromopropionate group (SI-ATRP initiator), was used to replace the original ligands. This process is rapid and facial for efficient surface functionalization and afterwards the Co NPs can be dispersed into polar solvent DMF without aggregation. FT-IR spectroscopy showed that the TOPO was completely replaced, but a small amount of OA remained on the surface. A TGA measurement allowed the calculation of the grafting density of the initiator as around 3.2 initiator/nm2. Then, the surface-initiated ATRP was conducted for the polymerization of NIPAM on the surface of Co NPs and rendered the nanocomposites water-dispersible. A temperature-dependent dynamic light scattering study showed the aggregation behavior of PNIPAM-coated Co NPs upon heating and this process was proven to be reversible. The combination of superparamagnetic and thermo-responsive properties in these hybrid nanoparticles is promising for future applications e.g. in biomedicine. In chapter 4, the magnetic-field-induced assembly of superparamagnetic cobalt nanoparticles both on solid substrates and at liquid-air interface was investigated. OA- and TOPO-coated Co NPs were synthesized via the thermolysis of cobalt carbonyl and dispersed into either hexane or toluene. The Co NP dispersion was dropped onto substrates (e.g., TEM grid, silicon wafer) and at liquid-air (water-air or ethylene glycol-air) interface. Due to the attractive dipolar interaction, 1-D chains formed in the presence of an external magnetic field. It is known that the concentration and the strength of the magnetic field can affect the assembly behavior of superparamagnetic Co NPs. Therefore, the influence of these two parameters on the morphology of the assemblies was studied. The formed 1-D chains were shorter and flexible at either lower concentration of the Co NP dispersion or lower strength of the external magnetic field due to thermal fluctuation. However, by increasing either the concentration of the NP dispersion or the strength of the applied magnetic field, these chains became longer, thicker and straighter. The reason could be that a high concentration led to a high fraction of short dipolar chains, and their interaction resulted in longer and thicker chains under applied magnetic field. On the other hand, when the magnetic field increased, the induced moments of the magnetic nanoparticles became larger, which dominated over the thermal fluctuation. Thus, the formed short chains connected to each other and grew in length. Thicker chains were also observed through chain-chain interaction. Furthermore, the induced moments of the NPs tended to direct into one direction with increased magnetic field, thus the chains were straighter. In comparison between the assembly on substrates, at water-air interface and at ethylene glycol-air interface, the assembly of Co NPs in hexane dispersion at ethylene glycol-air interface showed the most regular and homogeneous chain structures due to the better spreading of the dispersion on ethylene glycol subphase than on water subphase and substrates. The magnetic-field-induced assembly of superparamagnetic nanoparticles could provide a powerful approach for applications in data storage and electronic devices. Chapter 5 presented the synthesis of superparamagnetic and ferromagnetic cobalt nanoparticles through a dual-stage thermolysis of cobalt carbonyl (Co2(CO)8) by using polystyrene as surfactant. The amine end-functionalized polystyrene surfactants with different molecular weight were prepared via atom transfer radical polymerization technique. The molecular weight determination of polystyrene was conducted by gel permeation chromatography (GPC) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry techniques. The results showed that, when the molecular weight distribution is low (Mw/Mn < 1.2), the measurement by GPC and MALDI-ToF MS provided nearly similar results. For example, the molecular weight of 10600 Da was obtained by MALDI-ToF MS, while GPC gave 10500 g/mol (Mw/Mn = 1.17). However, if the polymer is poly distributed, MALDI-ToF MS cannot provide an accurate value. This was exemplified for a polymer with a molecular weight of 3130 Da measured by MALDI-TOF MS, while GPC showed 2300 g/mol (Mw/Mn = 1.38). The size, size distribution and magnetic properties of the hybrid particles were different by changing either the molecular weight or concentration of the polymer surfactants. The analysis from TEM characterization showed that the size of cobalt nanoparticles stabilized with polystyrene of lower molecular weight (Mn = 2300 g/mol) varied from 12-22 nm, while the size with middle (Mn = 4500 g/mol) and higher molecular weight (Mn = 10500 g/mol) of polystyrene-coated cobalt nanoparticles showed little change. Magnetic measurements exhibited that the small cobalt particles (12 nm) were superparamagnetic, while larger particles (21 nm) were ferromagnetic and assembled into 1-D chains. The grafting density calculated from thermogravimetric analysis showed that a higher grafting density of polystyrene was obtained with lower molecular weight (Mn = 2300 g/mol) than those with higher molecular weight (Mn = 10500 g/mol). Due to the larger steric hindrance, polystyrene with higher molecular weight cannot form a dense shell on the surface of the nanoparticles, which resulted in a lower grafting density. Wide angle X-ray scattering measurements revealed the epsilon cobalt crystalline phases of both superparamagnetic Co NPs coated with polystyrene (Mn = 2300 g/mol) and ferromagnetic Co NPs coated with polystyrene (Mn = 10500 g/mol). Furthermore, a stability study showed that PS-Co NPs prepared with higher polymer concentration and polymer molecular weight exhibited a better stability.},
  language  = {en}
}
@phdthesis{Chanana2010,
  author    = {Chanana, Munish},
  title     = {Synthesis of stimuli-responsive and switchable inorganic nanoparticles for biomedical applications},
  address   = {Potsdam},
  pages     = {128, E-1 S. : Ill., graph. Darst.},
  year      = {2010},
  language  = {en}
}
@phdthesis{LorenteSanchez2017,
  author    = {Lorente S{\´a}nchez, Alejandro Jose},
  title     = {Synthesis of side-chain polystyrenes for all organic solution processed OLEDs},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-398006},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 131},
  year      = {2017},
  abstract  = {In the present work side-chain polystyrenes were synthesized and characterized, in order to be applied in multilayer OLEDs fabricated by solution process techniques. Manufacture of optoelectronic devices by solution process techniques is meant to decrease significantly fabrication cost and allow large scale production of such devices. This dissertation focusses in three series, enveloped in two material classes. The two classes differ to each other in the type of charge transport exhibited, either ambipolar transport or electron transport. All materials were applied in all-organic solution processed green Ir-based devices. In the first part, a series of ambipolar host materials were developed to transport both charge types, holes and electrons, and be applied especially as matrix for green Ir-based emitters. It was possible to increase devices efficacy by modulating the predominant charge transport type. This was achieved by modification of molecules electron transport part with more electron-deficient heterocycles or by extending the delocalization of the LUMO. Efficiencies up to 28.9 cd/A were observed for all-organic solution-process three layer devices. In the second part, suitability of triarylboranes and tetraphenylsilanes as electron transport materials was studied. High triplet energies were obtained, up to 2.95 eV, by rational combination of both molecular structures. Although the combination of both elements had a low effect in materials electron transport properties, high efficiencies around 24 cd/A were obtained for the series in all-organic solution-processed two layer devices. In the last part, benzene and pyridine were chosen as the series electron-transport motif. By controlling the relative pyridine content (RPC) solubility into methanol was induced for polystyrenes with bulky side-chains. Materials with RPC ≥ 0.5 could be deposited orthogonally from solution without harming underlying layers. From the best of our knowledge, this is the first time such materials are applied in this architecture showing moderate efficiencies around 10 cd/A in all-organic solution processed OLEDs. Overall, the outcome of these studies will actively contribute to the current research on materials for all-solution processed OLEDs.},
  language  = {en}
}
@phdthesis{Yagci2008,
  author    = {Yagci, Yavuz Emre},
  title     = {Synthesis of poly(tartar amide)s and poly-(gluco amide)s as antifreeze additives},
  address   = {Potsdam},
  pages     = {vi, 86 S.: Ill., graph. Darst.},
  year      = {2008},
  language  = {en}
}
@phdthesis{Yagci2008,
  author    = {Yagci, Yavuz Emre},
  title     = {Synthesis of poly(tartar amide)s and poly-(gluco amide)s as antifreeze additives},
  address   = {Potsdam},
  pages     = {86 S., ii-vi, : graph. Darst.},
  year      = {2008},
  language  = {en}
}
@phdthesis{Akdemir2009,
  author    = {Akdemir, {\"O}zg{\"u}r},
  title     = {Synthesis of novel non-viral gene carriers via atom transfer radical polymerization and click chemistry},
  address   = {Potsdam},
  pages     = {X, 121 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {en}
}
@phdthesis{Kwesiga2022,
  author    = {Kwesiga, George},
  title     = {Synthesis of isoflavonoids from African medicinal plants with activity against tropical infectious diseases},
  doi       = {10.25932/publishup-55906},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559069},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxi, 175},
  year      = {2022},
  abstract  = {Two approaches for the synthesis of prenylated isoflavones were explored: the 2,3-oxidative rearrangement/cross metathesis approach, using hypervalent iodine reagents as oxidants and the Suzuki-Miyaura cross-coupling/cross metathesis approach. Three natural prenylated isoflavones: 5-deoxy-3′-prenylbiochanin A (59), erysubin F (61) and 7-methoxyebenosin (64), and non-natural analogues: 7,4′-dimethoxy-8,3′-diprenylisoflavone (126j) and 4′-hydroxy-7-methoxy-8,3′-diprenylisoflavone (128) were synthesized for the first time via the 2,3-oxidative rearrangement/cross metathesis approach, using mono- or diallylated flavanones as key intermediates. The reaction of flavanones with hypervalent iodine reagents afforded isoflavones via a 2,3-oxidative rearrangement and the corresponding flavone isomers via a 2,3-dehydrogenation. This afforded the synthesis of 7,4′-dimethoxy-8-prenylflavone (127g), 7,4′-dimethoxy-8,3′-diprenylflavone (127j), 7,4′-dihydroxy-8,3′-diprenylflavone (129) and 4′-hydroxy-7-methoxy-8,3′-diprenylflavone (130), the non-natural regioisomers of 7-methoxyebenosin, 126j, erysubin F and 128 respectively. Three natural prenylated isoflavones: 3′-prenylbiochanin A (58), neobavaisoflavone (66) and 7-methoxyneobavaisoflavone (137) were synthesized for the first time using the Suzuki-Miyaura cross-coupling/cross metathesis approach. The structures of 3′-prenylbiochanin A (58) and 5-deoxy-3′-prenylbiochanin A (59) were confirmed by single crystal X-ray diffraction analysis. The 2,3-oxidative rearrangement approach appears to be limited to the substitution pattern on both rings A and B of the flavanone while the Suzuki-Miyaura cross-coupling approach appears to be the most suitable for the synthesis of simple isoflavones or prenylated isoflavones whose prenyl substituents or allyl groups, the substituents that are essential precursors for the prenyl side chains, can be regioselectively introduced after the construction of the isoflavone core. The chalcone-flavanone hybrids 146, 147 and 148, hybrids of the naturally occurring bioactive flavanones liquiritigenin-7-methyl ether, liquiritigenin and liquiritigenin-4′-methyl ether respectively were also synthesized for the first time, using Matsuda-Heck arylation and allylic/benzylic oxidation as key steps. The intermolecular interactions of 5-deoxy-3′-prenylbiochanin A (59) and its two closely related precursors 106a and 106b was investigated by single crystal and Hirshfeld surface analyses to comprehend their different physicochemical properties. The results indicate that the presence of strong intermolecular O-H···O hydrogen bonds and an increase in the number of π-stacking interactions increases the melting point and lowers the solubility of isoflavone derivatives. However, the strong intermolecular O-H···O hydrogen bonds have a greater effect than the π-stacking interactions. 5-Deoxy-3′-prenylbiochanin A (59), erysubin F (61) and 7,4′-dihydroxy-8,3′-diprenylflavone (129), were tested against three bacterial strains and one fungal pathogen. All the three compounds were inactive against Salmonella enterica subsp. enterica (NCTC 13349), Escherichia coli (ATCC 25922), and Candida albicans (ATCC 90028), with MIC values greater than 80.0 μM. The diprenylated isoflavone erysubin F (61) and its flavone isomer 129 showed in vitro activity against methicillin-resistant Staphylococcus aureus (MRSA, ATCC 43300) at MIC values of 15.4 and 20.5 μM, respectively. 5-Deoxy-3′-prenylbiochanin A (59) was inactive against this MRSA strain. Erysubin F (61) and its flavone isomer 129 could serve as lead compounds for the development of new alternative drugs for the treatment of MRSA infections.},
  language  = {en}
}
@phdthesis{Kim2023,
  author    = {Kim, Jiyong},
  title     = {Synthesis of InP quantum dots and their applications},
  doi       = {10.25932/publishup-58535},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-585351},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XIX, 142},
  year      = {2023},
  abstract  = {Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100\%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD-LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics. Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface. Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn-Cu-In-S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694-850 nm yield the highest-ever PL QYs of 71.5-82.4\%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress. Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs). Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III-V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis-mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs. Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III-V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements. Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically.},
  language  = {en}
}
@phdthesis{Knauf2020,
  author    = {Knauf, Jan},
  title     = {Synthesis of highly fluorinated precursors and their deposition conditions for self-assembled monolayers with defined small-scale surface structures as templates for the manipulation of wetting behavior},
  doi       = {10.25932/publishup-47380},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473804},
  school      = {Universit{\"a}t Potsdam},
  pages     = {X, 204},
  year      = {2020},
  abstract  = {"How Wenzel and Cassie were wrong" - this was the eye-catching title of an article published by Lichao Gao and Thomas McCarthy in 2007, in which fundamental interpretations of wetting behavior were put into question. The authors initiated a discussion on a subject, which had been generally accepted a long time ago and they showed that wetting phenomena were not as fully understood as imagined. Similarly, this thesis tries to put a focus on certain aspects of liquid wetting, which so far have been widely neglected in terms of interpretation and experimental proof. While the effect of surface roughness on the macroscopically observed wetting behavior is commonly and reliably interpreted according to the well-known models of Wenzel and Cassie/Baxter, the size-scale of the structures responsible for the surface's rough texture has not been of further interest. Analogously, the limits of these models have not been described and exploited. Thus, the question arises, what will happen when the size of surface structures is reduced to the size of the contacting liquid molecules itself? Are common methods still valid or can deviations from macroscopic behavior be observed? This thesis wants to create a starting point regarding these questions. In order to investigate the effect of smallest-scale surface structures on liquid wetting, a suitable model system is developed by means of self-assembled monolayer (SAM) formation from (fluoro)organic thiols of differing lengths of the alkyl chain. Surface topographies are created which rely on size differences of several {\AA}ngstr{\"o}ms and exhibit surprising wetting behavior depending on the choice of the individual precursor system. Thus, contact angles are experimentally detected, which deviate considerably from theoretical calculations based on Wenzel and Cassie/Baxter models and confirm that sub-nm surface topographies affect wetting. Moreover, experimentally determined wetting properties are found to correlate well to an assumed scale-dependent surface tension of the contacting liquid. This behavior has already been described for scattering experiments taking into account capillary waves on the liquid surface induced by temperature and had been predicted earlier by theoretical calculations. However, the investigation of model surfaces requires the provision of suitable precursor molecules, which are not commercially available and opens up a door to the exotic chemistry of fluoro-organic materials. During the course of this work, the synthesis of long-chain precursors is examined with a particular focus put on oligomerically pure semi-fluorinated n-alkyl thiols and n-alkyl trichlorosilanes. For this, general protocols for the syntheses of the desired compounds are developed and product mixtures are assayed to be separated into fractions of individual chain lengths by fluorous-phase high-performance liquid chromatography (F-HPLC). The transition from model systems to technically more relevant surfaces and applications is initiated through the deposition of SAMs from long-chain fluorinated n-alkyl trichlorosilanes. Depositions are accomplished by a vapor-phase deposition process conducted on a pilot-scale set-up, which enables the exact control of relevant process parameters. Thus, the influence of varying deposition conditions on the properties of the final coating is examined and analyzed for the most important parameters. The strongest effect is observed for the partial pressure of reactive water vapor, which directly controls the extent of precursor hydrolysis during the deposition process. Experimental results propose that the formation of ordered monolayers rely on the amount of hydrolyzed silanol species present in the deposition system irrespective of the exact grade of hydrolysis. However, at increased amounts of species which are able to form cross-linked molecules due to condensation reactions, films deteriorate in quality. This effect is assumed to be caused by the introduction of defects within the film and the adsorption of cross linked agglomerates. Deposition conditions are also investigated for chain extended precursor species and reveal distinct differences caused by chain elongation.},
  language  = {en}
}
@phdthesis{Issaree2008,
  author    = {Issaree, Arisara},
  title     = {Synthesis of Hetero-chitooligosaccharides},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17069},
  school      = {Universit{\"a}t Potsdam},
  year      = {2008},
  abstract  = {Chitooligosaccharides are composed of linear β-(1→4)-linked 2-acetamido-2-deoxy-β-D-glucopyranose (GlcNAc) and/or 2-amino-2-deoxy-β-D-glucopyranose (GlcN). They are of interest due to their remarkable biological properties including antibacterial, antitumor, antifungal and elicitor activities. They can be obtained from the aminoglucan chitosan by chemical or enzymatic degradation which obviously affords rather heterogenous mixtures. On the other hand, chemical synthesis provides pure compounds with defined sequences of GlcNAc and GlcN monomers. The synthesis of homo- and hetero-chitobioses and hetero-chitotetraoses is described in this thesis. Dimethylmaleoyl and phthaloyl groups were used for protection of the amines. The donor was activated as the trichloroacetimidate in order to form the β-linkages. Glycosylation in the presence of trimethylsilyl trifluoromethanesulfonate, followed by N- and O-deprotection furnished chitobioses and chitotetraoses in good yields.},
  language  = {en}
}
@phdthesis{Imranulhaq2008,
  author    = {Imran ul-haq, Muhammad},
  title     = {Synthesis of fluorinated polymers in supercritical carbon dioxide (scCO₂)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-19868},
  school      = {Universit{\"a}t Potsdam},
  year      = {2008},
  abstract  = {For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol-1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.\% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The "livingness" is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol-1·s-1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10-1, 9·10-2 and 2·10-4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 \% for DTBP-derived end groups to a maximum of 62 \% for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol-1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol-1 and PFHI (C6F13I) - derived end groups.},
  language  = {en}
}
@phdthesis{Karras2018,
  author    = {Karras, Manfred},
  title     = {Synthesis of enantiomerically pure helical aromatics such as NHC ligands and their use in asymmetric catalysis},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421497},
  school      = {Universit{\"a}t Potsdam},
  pages     = {121},
  year      = {2018},
  abstract  = {Diese Arbeit besch{\"a}ftigt sich mit der enantiomerenreinen Synthese helikaler, aromatischer Verbindungen. Verschiedene Verbindungen dieses Typs wurden erfolgreich hergestellt und charakterisiert. Desweiteren wurden einige der neuen Verbindungen in {\"U}bergangsmetallkomplexe eingebaut und diese dann als Katalysatoren f{\"u}r Metathese und Kreuzkupplungen getestet. Einer der getesteten Katalysatoren zeigte vielversprechende Ergebnisse in der asymmetrischen Olefinmetathese. Die Struktur des neuen Katalysators wurde untersucht. Anhand der Struktur des neuen Katalysators wurden R{\"u}ckschl{\"u}sse auf einen m{\"o}glichen Mechanismus gezogen.},
  language  = {en}
}
@phdthesis{Dai2018,
  author    = {Dai, Xiaolin},
  title     = {Synthesis of artificial building blocks for sortase-mediated ligation and their enzymatic linkage},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-420060},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XIV, 125},
  year      = {2018},
  abstract  = {Das Enzym Sortase A katalysiert die Bildung einer Peptidbindung zwischen der Erkennungssequenz LPXTG und einem Oligoglycin. W{\"a}hrend vielf{\"a}ltige Ligationen zwischen Proteinen und verschiedenen Biomolek{\"u}len, Proteinen und kleinen synthetischen Molek{\"u}len, sowie Proteinen und Oberfl{\"a}chen durchgef{\"u}hrt wurden, besteht das Ziel dieser Arbeit darin, die Sortase-katalysierte Verlinkung von synthetischen Bausteinen zu untersuchen. Dies k{\"o}nnte den Weg bereiten f{\"u}r die Anwendung von Sortase A f{\"u}r chemische Aufgabenstellungen und eventuell sogar in den Materialwissenschaften. F{\"u}r diese grunds{\"a}tzliche Untersuchung wurden die verwendeten Bausteine zun{\"a}chst so einfach wie m{\"o}glich gehalten und leicht zug{\"a}ngliche SiO2 Nanopartikel und kommerziell erh{\"a}ltliche Polymerbl{\"o}cke ausgew{\"a}hlt. Die Bausteine wurden als erstes mit den Peptidsequenzen f{\"u}r Sortase-vermittelte Ligationen funktionalisiert. SiO2 Nanopartikel wurden mit Durchmessern von 60 und 200 nm hergestellt und mit C=C Doppelbindungen oberfl{\"a}chenmodifiziert. Dann wurden Peptide mit einem terminalen Cystein kovalent durch eine Thiol-en Reaktion angebunden. An die 60 nm NP wurden Peptide mit einem Pentaglycin und an die 200 nm Partikel Peptide mit LPETG Sequenz gebunden. Auf die gleiche Art und Weise wurden Peptide mit terminalem Cystein an die Polymere Polyethylenglykol (PEG) und Poly(N Isopropylacrylamid) (PNIPAM), die beide {\"u}ber C=C Endgruppen verf{\"u}gen, gebunden und G5-PEG und PNIPAM-LPETG Konjugate erhalten. Mit den vier Bausteinen wurden nun durch Sortase-vermittelte Ligation NP-Polymer Hybride, NP-NP und Polymer-Polymer Strukturen hergestellt und die Produkte u. a. durch Transmissionselektronen-mikroskopie, MALDI-ToF Massenspektrometrie sowie Dynamische Lichtstreuung charakterisiert. Die Verlinkung dieser synthetischen Bausteine konnte eindeutig gezeigt werden. Das Verwenden von kommerziell erh{\"a}ltlichen Polymeren hat jedoch zu einem Gemisch der Polymer-Peptid Konjugate mit unmodifiziertem Polymer gef{\"u}hrt, welches nicht gereinigt werden konnte. Deswegen wurden anschließend Synthesestrategien f{\"u}r reine Peptid-Polymer und Polymer-Peptid Konjugate als Bausteine f{\"u}r Sortase-vermittelte Ligationen entwickelt. Diese basieren auf der RAFT Polymerisation mit CTAs, die entweder an N- oder C-Terminus eines Peptids gebunden sind. GG-PNIPAM wurde durch das Anbinden eines geeigneten RAFT CTAs an Fmoc-GG in einer Veresterungsreaktion, Polymerisation von NIPAM und Abspalten der Fmoc Schutzgruppe synthetisiert. Weiterhin wurden mehrere Peptide durch Festphasen-Peptidsynthese erhalten. Die Anbindung eines RAFT CTAs (oder eines Polymerisationsinitiators) an den N-Terminus eines Peptids kann automatisiert als letzter Schritt in einem Peptid-Synthetisierer erfolgen. Die Synthese eines solchen Konjugats konnte in dem Zeithorizont dieser Arbeit noch nicht erreicht werden. Jedoch existieren mehrere vielversprechende Strategien, um diesen Ansatz mit verschiedenen Kopplungsreagenzien zur Anbindung des CTAs fortzusetzen. Solche Polymer Bausteine k{\"o}nnen in Zukunft f{\"u}r die Synthese von Protein-Polymer Konjugaten durch Sortase-Katalyse verwendet werden. Außerdem kann der Ansatz auch f{\"u}r die Synthese von Block-Copolymeren aus Polymerbl{\"o}cken mit Peptidmotiven an beiden Enden ausgebaut werden. Auch wenn bei der grunds{\"a}tzlichen Untersuchung im Rahmen dieser Arbeit Hybridstrukturen hergestellt wurden, die auch durch traditionelle chemische Synthesen erhalten werden k{\"o}nnten, wird ein Bausatz solcher Bausteine in Zukunft die Synthese neuer Materialien erm{\"o}glichen und kann auch den Weg f{\"u}r die Anwendung von Enzymen in den Materialwissenschaften ebnen. In Erg{\"a}nzung zu Nanopartikeln und Block-Copolymeren k{\"o}nnen dann auch Hybridmaterialien unter Einbezug von Protein-basierten Bausteinen hergestellt werden. Daher k{\"o}nnten Sortase Enzyme zu einem Werkzeug werden, welches etablierte chemische Verlinkungstechniken erg{\"a}nzt und mit den hoch spezifischen Peptidmotiven {\"u}ber funktionale Einheiten verf{\"u}gt, die orthogonal zu allen chemischen Gruppen sind.},
  language  = {en}
}
@phdthesis{Schuerings2019,
  author    = {Sch{\"u}rings, Marco Philipp Hermann},
  title     = {Synthesis of 1D microgel strands and their motion analysis in solution},
  doi       = {10.25932/publishup-43953},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439532},
  school      = {Universit{\"a}t Potsdam},
  pages     = {167},
  year      = {2019},
  abstract  = {The fabrication of 1D nanostrands composed of stimuli responsive microgels has been shown in this work. Microgels are well known materials able to respond to various stimuli from outer environment. Since these microgels respond via a volume change to an external stimulus, a targeted mechanical response can be achieved. Through carefully choosing the right composition of the polymer matrix, microgels can be designed to react precisely to the targeted stimuli (e.g. drug delivery via pH and temperature changes, or selective contractions through changes in electrical current125). In this work, it was aimed to create flexible nano-filaments which are capable of fast anisotropic contractions similar to muscle filaments. For the fabrication of such filaments or strands, nanostructured templates (PDMS wrinkles) were chosen due to a facile and low-cost fabrication and versatile tunability of their dimensions. Additionally, wrinkling is a well-known lithography-free method which enables the fabrication of nanostructures in a reproducible manner and with a high long-range periodicity. In Chapter 2.1, it was shown for the first time that microgels as soft matter particles can be aligned to densely packed microgel arrays of various lateral dimensions. The alignment of microgels with different compositions (e.g. VCL/AAEM, NIPAAm, NIPAAm/VCL and charged microgels) was shown by using different assembly techniques (e.g. spin-coating, template confined molding). It was chosen to set one experimental parameter constant which was the SiOx surface composition of the templates and substrates (e.g. oxidized PDMS wrinkles, Si-wafers and glass slides). It was shown that the fabrication of nanoarrays was feasible with all tested microgel types. Although the microgels exhibited different deformability when aligned on a flat surface, they retained their thermo-responsivity and swelling behavior. Towards the fabrication of 1D microgel strands interparticle connectivity was aspired. This was achieved via different cross-linking methods (i.e. cross-linking via UV-irradiation and host-guest complexation) discussed in Chapter 2.2. The microgel arrays created by different assembly methods and microgel types were tested for their cross-linking suitability. It was observed that NIPAAm based microgels cannot be cross-linked with UV light. Furthermore, it was found that these microgels exhibit a strong surface-particle-interaction and therefore could not be detached from the given substrates. In contrast to the latter, with VCL/AAEM based microgels it was possible to both UV cross-link them based on the keto-enol tautomerism of the AAEM copolymer, and to detach them from the substrate due to the lower adhesion energy towards SiOx surfaces. With VCL/AAEM microgels long, one-dimensional microgel strands could be re-dispersed in water for further analysis. It has also been shown that at least one lateral dimension of the free dispersed 1D microgel strands is easily controllable by adjusting the wavelength of the wrinkled template. For further work, only VCL/AAEM based microgels were used to focus on the main aim of this work, i.e. the fabrication of 1D microgel nanostrands. As an alternative to the unspecific and harsh UV cross-linking, the host-guest complexation via diazobenzene cross-linkers and cyclodextrin hosts was explored. The idea behind this approach was to give means to a future construction kit-like approach by incorporation of cyclodextrin comonomers in a broad variety of particle systems (e.g. microgels, nanoparticles). For this purpose, VCL/AAEM microgels were copolymerized with different amounts of mono-acrylate functionalized β-cyclodextrin (CD). After successfully testing the cross-linking capability in solution, the cross-linking of aligned VCL/AAEM/CD microgels was tried. Although the cross-linking worked well, once the single arrays came into contact to each other, they agglomerated. As a reason for this behavior residual amounts of mono-complexed diazobenzene linkers were suspected. Thus, end-capping strategies were tried out (e.g. excess amounts of β-cyclodextrin and coverage with azobenzene functionalized AuNPs) but were unsuccessful. With deeper thought, entropy effects were taken into consideration which favor the release of complexed diazobenzene linker leading to agglomerations. To circumvent this entropy driven effect, a multifunctional polymer with 50\% azobenzene groups (Harada polymer) was used. First experiments with this polymer showed promising results regarding a less pronounced agglomeration (Figure 77). Thus, this approach could be pursued in the future. In this chapter it was found out that in contrast to pearl necklace and ribbon like formations, particle alignment in zigzag formation provided the best compromise in terms of stability in dispersion (see Figure 44a and Figure 51) while maintaining sufficient flexibility. For this reason, microgel strands in zigzag formation were used for the motion analysis described in Chapter 2.3. The aim was to observe the properties of unrestrained microgel strands in solution (e.g. diffusion behavior, rotational properties and ideally, anisotropic contraction after temperature increase). Initially, 1D microgel strands were manipulated via AFM in a liquid cell setup. It could be observed that the strands required a higher load force compared to single microgels to be detached from the surface. However, with the AFM it was not possible to detach the strands in a controllable manner but resulted in a complete removal of single microgel particles and a tearing off the strands from the surface, respectively. For this reason, to observe the motion behavior of unrestrained microgel strands in solution, confocal microscopy was used. Furthermore, to hinder an adsorption of the strands, it was found out that coating the surface of the substrates with a repulsive polymer film was beneficial. Confocal and wide-field microscopy videos showed that the microgel strands exhibit translational and rotational diffusive motion in solution without perceptible bending. Unfortunately, with these methods the detection of the anisotropic stimuli responsive contraction of the free moving microgel strands was not possible. To summarize, the flexibility of microgel strands is more comparable to the mechanical behavior of a semi flexible cable than to a yarn. The strands studied here consist of dozens or even hundreds of discrete submicron units strung together by cross-linking, having few parallels in nanotechnology. With the insights gained in this work on microgel-surface interactions, in the future, a targeted functionalization of the template and substrate surfaces can be conducted to actively prevent unwanted microgel adsorption for a given microgel system (e.g. PVCL and polystyrene coating235). This measure would make the discussed alignment methods more diverse. As shown herein, the assembly methods enable a versatile microgel alignment (e.g. microgel meshes, double and triple strands). To go further, one could use more complex templates (e.g. ceramic rhombs and star shaped wrinkles (Figure 14) to expand the possibilities of microgel alignment and to precisely control their aspect ratios (e.g. microgel rods with homogeneous size distributions).},
  language  = {en}
}
@phdthesis{Pavashe2017,
  author    = {Pavashe, Prashant},
  title     = {Synthesis and transformations of 2-thiocarbohydrates},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-397739},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 132},
  year      = {2017},
  abstract  = {I. Ceric ammonium nitrate (CAN) mediated thiocyanate radical additions to glycals In this dissertation, a facile entry was developed for the synthesis of 2-thiocarbohydrates and their transformations. Initially, CAN mediated thiocyanation of carbohydrates was carried out to obtain the basic building blocks (2-thiocyanates) for the entire studies. Subsequently, 2-thiocyanates were reduced to the corresponding thiols using appropriate reagents and reaction conditions. The screening of substrates, stereochemical outcome and the reaction mechanism are discussed briefly (Scheme I). Scheme I. Synthesis of the 2-thiocyanates II and reductions to 2-thiols III \& IV. An interesting mechanism was proposed for the reduction of 2-thiocyanates II to 2-thiols III via formation of a disulfide intermediate. The water soluble free thiols IV were obtained by cleaving the thiocyanate and benzyl groups in a single step. In the subsequent part of studies, the synthetic potential of the 2-thiols was successfully expanded by simple synthetic transformations. II. Transformations of the 2-thiocarbohydrates The 2-thiols were utilized for convenient transformations including sulfa-Michael additions, nucleophilic substitutions, oxidation to disulfides and functionalization at the anomeric position. The diverse functionalizations of the carbohydrates at the C-2 position by means of the sulfur linkage are the highlighting feature of these studies. Thus, it creates an opportunity to expand the utility of 2-thiocarbohydrates for biological studies. Reagents and conditions: a) I2, pyridine, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 drop), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3, ZnBr2, iPrOH/H2O, reflux, 15 h; g) NaOH (1 M), TBAI, benzene, rt, 2 h; h) ZnCl2, CHCl3, reflux, 3 h. Scheme II. Functionalization of 2-thiocarbohydrates. These transformations have enhanced the synthetic value of 2-thiocarbohydrates for the preparative scale. Worth to mention is the Lewis acid catalyzed replacement of the methoxy group by other nucleophiles and the synthesis of the (2→1) thiodisaccharides, which were obtained with complete β-selectivity. Additionally, for the first time, the carbohydrate linked thiotetrazole was synthesized by a (3 + 2) cycloaddition approach at the C-2 position. III. Synthesis of thiodisaccharides by thiol-ene coupling. In the final part of studies, the synthesis of thiodisaccharides by a classical photoinduced thiol-ene coupling was successfully achieved. Reagents and conditions: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Scheme III. Thiol-ene coupling between 2-thiols and exo-glycals. During the course of investigations, it was found that the steric hindrance plays an important role in the addition of bulky thiols to endo-glycals. Thus, we successfully screened the suitable substrates for addition of various thiols to sterically less hindered alkenes (Scheme III). The photochemical addition of 2-thiols to three different exo-glycals delivered excellent regio- and diastereoselectivities as well as yields, which underlines the synthetic potential of this convenient methodology.},
  language  = {en}
}