@phdthesis{Lontsi2016, author = {Lontsi, Agostiny Marrios}, title = {1D shallow sedimentary subsurface imaging using ambient noise and active seismic data}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103807}, school = {Universit{\"a}t Potsdam}, pages = {xix, 119}, year = {2016}, abstract = {The Earth's shallow subsurface with sedimentary cover acts as a waveguide to any incoming wavefield. Within the framework of my thesis, I focused on the characterization of this shallow subsurface within tens to few hundreds of meters of sediment cover. I imaged the seismic 1D shear wave velocity (and possibly the 1D compressional wave velocity). This information is not only required for any seismic risk assessment, geotechnical engineering or microzonation activities, but also for exploration and global seismology where site effects are often neglected in seismic waveform modeling. First, the conventional frequency-wavenumber (f - k) technique is used to derive the dispersion characteristic of the propagating surface waves recorded using distinct arrays of seismometers in 1D and 2D configurations. Further, the cross-correlation technique is applied to seismic array data to estimate the Green's function between receivers pairs combination assuming one is the source and the other the receiver. With the consideration of a 1D media, the estimated cross-correlation Green's functions are sorted with interstation distance in a virtual 1D active seismic experiment. The f - k technique is then used to estimate the dispersion curves. This integrated analysis is important for the interpretation of a large bandwidth of the phase velocity dispersion curves and therefore improving the resolution of the estimated 1D Vs profile. Second, the new theoretical approach based on the Diffuse Field Assumption (DFA) is used for the interpretation of the observed microtremors H/V spectral ratio. The theory is further extended in this research work to include not only the interpretation of the H/V measured at the surface, but also the H/V measured at depths and in marine environments. A modeling and inversion of synthetic H/V spectral ratio curves on simple predefined geological structures shows an almost perfect recovery of the model parameters (mainly Vs and to a lesser extent Vp). These results are obtained after information from a receiver at depth has been considered in the inversion. Finally, the Rayleigh wave phase velocity information, estimated from array data, and the H/V(z, f) spectral ratio, estimated from a single station data, are combined and inverted for the velocity profile information. Obtained results indicate an improved depth resolution in comparison to estimations using the phase velocity dispersion curves only. The overall estimated sediment thickness is comparable to estimations obtained by inverting the full micortremor H/V spectral ratio.}, language = {en} } @phdthesis{Falter2016, author = {Falter, Daniela}, title = {A novel approach for large-scale flood risk assessments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90239}, school = {Universit{\"a}t Potsdam}, pages = {95}, year = {2016}, abstract = {In the past, floods were basically managed by flood control mechanisms. The focus was set on the reduction of flood hazard. The potential consequences were of minor interest. Nowadays river flooding is increasingly seen from the risk perspective, including possible consequences. Moreover, the large-scale picture of flood risk became increasingly important for disaster management planning, national risk developments and the (re-) insurance industry. Therefore, it is widely accepted that risk-orientated flood management ap-proaches at the basin-scale are needed. However, large-scale flood risk assessment methods for areas of several 10,000 km² are still in early stages. Traditional flood risk assessments are performed reach wise, assuming constant probabilities for the entire reach or basin. This might be helpful on a local basis, but where large-scale patterns are important this approach is of limited use. Assuming a T-year flood (e.g. 100 years) for the entire river network is unrealistic and would lead to an overestimation of flood risk at the large scale. Due to the lack of damage data, additionally, the probability of peak discharge or rainfall is usually used as proxy for damage probability to derive flood risk. With a continuous and long term simulation of the entire flood risk chain, the spatial variability of probabilities could be consider and flood risk could be directly derived from damage data in a consistent way. The objective of this study is the development and application of a full flood risk chain, appropriate for the large scale and based on long term and continuous simulation. The novel approach of 'derived flood risk based on continuous simulations' is introduced, where the synthetic discharge time series is used as input into flood impact models and flood risk is directly derived from the resulting synthetic damage time series. The bottleneck at this scale is the hydrodynamic simu-lation. To find suitable hydrodynamic approaches for the large-scale a benchmark study with simplified 2D hydrodynamic models was performed. A raster-based approach with inertia formulation and a relatively high resolution of 100 m in combination with a fast 1D channel routing model was chosen. To investigate the suitability of the continuous simulation of a full flood risk chain for the large scale, all model parts were integrated into a new framework, the Regional Flood Model (RFM). RFM consists of the hydrological model SWIM, a 1D hydrodynamic river network model, a 2D raster based inundation model and the flood loss model FELMOps+r. Subsequently, the model chain was applied to the Elbe catchment, one of the largest catchments in Germany. For the proof-of-concept, a continuous simulation was per-formed for the period of 1990-2003. Results were evaluated / validated as far as possible with available observed data in this period. Although each model part introduced its own uncertainties, results and runtime were generally found to be adequate for the purpose of continuous simulation at the large catchment scale. Finally, RFM was applied to a meso-scale catchment in the east of Germany to firstly perform a flood risk assessment with the novel approach of 'derived flood risk assessment based on continuous simulations'. Therefore, RFM was driven by long term synthetic meteorological input data generated by a weather generator. Thereby, a virtual time series of climate data of 100 x 100 years was generated and served as input to RFM providing subsequent 100 x 100 years of spatially consistent river discharge series, inundation patterns and damage values. On this basis, flood risk curves and expected annual damage could be derived directly from damage data, providing a large-scale picture of flood risk. In contrast to traditional flood risk analysis, where homogenous return periods are assumed for the entire basin, the presented approach provides a coherent large-scale picture of flood risk. The spatial variability of occurrence probability is respected. Additionally, data and methods are consistent. Catchment and floodplain processes are repre-sented in a holistic way. Antecedent catchment conditions are implicitly taken into account, as well as physical processes like storage effects, flood attenuation or channel-floodplain interactions and related damage influencing effects. Finally, the simulation of a virtual period of 100 x 100 years and consequently large data set on flood loss events enabled the calculation of flood risk directly from damage distributions. Problems associated with the transfer of probabilities in rainfall or peak runoff to probabilities in damage, as often used in traditional approaches, are bypassed. RFM and the 'derived flood risk approach based on continuous simulations' has the potential to provide flood risk statements for national planning, re-insurance aspects or other questions where spatially consistent, large-scale assessments are required.}, language = {en} } @phdthesis{Olonscheck2016, author = {Olonscheck, Mady}, title = {Climate change impacts on electricity and residential energy demand}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98378}, school = {Universit{\"a}t Potsdam}, pages = {XXIV, 127}, year = {2016}, abstract = {The energy sector is both affected by climate change and a key sector for climate protection measures. Energy security is the backbone of our modern society and guarantees the functioning of most critical infrastructure. Thus, decision makers and energy suppliers of different countries should be familiar with the factors that increase or decrease the susceptibility of their electricity sector to climate change. Susceptibility means socioeconomic and structural characteristics of the electricity sector that affect the demand for and supply of electricity under climate change. Moreover, the relevant stakeholders are supposed to know whether the given national energy and climate targets are feasible and what needs to be done in order to meet these targets. In this regard, a focus should be on the residential building sector as it is one of the largest energy consumers and therefore emitters of anthropogenic CO 2 worldwide. This dissertation addresses the first aspect, namely the susceptibility of the electricity sector, by developing a ranked index which allows for quantitative comparison of the electricity sector susceptibility of 21 European countries based on 14 influencing factors. Such a ranking has not been completed to date. We applied a sensitivity analysis to test the relative effect of each influencing factor on the susceptibility index ranking. We also discuss reasons for the ranking position and thus the susceptibility of selected countries. The second objective, namely the impact of climate change on the energy demand of buildings, is tackled by means of a new model with which the heating and cooling energy demand of residential buildings can be estimated. We exemplarily applied the model to Germany and the Netherlands. It considers projections of future changes in population, climate and the insulation standards of buildings, whereas most of the existing studies only take into account fewer than three different factors that influence the future energy demand of buildings. Furthermore, we developed a comprehensive retrofitting algorithm with which the total residential building stock can be modeled for the first time for each year in the past and future. The study confirms that there is no correlation between the geographical location of a country and its position in the electricity sector susceptibility ranking. Moreover, we found no pronounced pattern of susceptibility influencing factors between countries that ranked higher or lower in the index. We illustrate that Luxembourg, Greece, Slovakia and Italy are the countries with the highest electricity sector susceptibility. The electricity sectors of Norway, the Czech Republic, Portugal and Denmark were found to be least susceptible to climate change. Knowledge about the most important factors for the poor and good ranking positions of these countries is crucial for finding adequate adaptation measures to reduce the susceptibility of the electricity sector. Therefore, these factors are described within this study. We show that the heating energy demand of residential buildings will strongly decrease in both Germany and the Netherlands in the future. The analysis for the Netherlands focused on the regional level and a finer temporal resolution which revealed strong variations in the future heating energy demand changes by province and by month. In the German study, we additionally investigated the future cooling energy demand and could demonstrate that it will only slightly increase up to the middle of this century. Thus, increases in the cooling energy demand are not expected to offset reductions in heating energy demand. The main factor for substantial heating energy demand reductions is the retrofitting of buildings. We are the first to show that the given German and Dutch energy and climate targets in the building sector can only be met if the annual retrofitting rates are substantially increased. The current rate of only about 1 \% of the total building stock per year is insufficient for reaching a nearly zero-energy demand of all residential buildings by the middle of this century. To reach this target, it would need to be at least tripled. To sum up, this thesis emphasizes that country-specific characteristics are decisive for the electricity sector susceptibility of European countries. It also shows for different scenarios how much energy is needed in the future to heat and cool residential buildings. With this information, existing climate mitigation and adaptation measures can be justified or new actions encouraged.}, language = {en} } @phdthesis{Castino2016, author = {Castino, Fabiana}, title = {Climate variability and extreme hydro-meteorological events in the Southern Central Andes, NW Argentina}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-396815}, school = {Universit{\"a}t Potsdam}, pages = {xi, 144}, year = {2016}, abstract = {Extreme hydro-meteorological events, such as severe droughts or heavy rainstorms, constitute primary manifestations of climate variability and exert a critical impact on the natural environment and human society. This is particularly true for high-mountain areas, such as the eastern flank of the southern Central Andes of NW Argentina, a region impacted by deep convection processes that form the basis of extreme events, often resulting in floods, a variety of mass movements, and hillslope processes. This region is characterized by pronounced E-W gradients in topography, precipitation, and vegetation cover, spanning low to medium-elevation, humid and densely vegetated areas to high-elevation, arid and sparsely vegetated environments. This strong E-W gradient is mirrored by differences in the efficiency of surface processes, which mobilize and transport large amounts of sediment through the fluvial system, from the steep hillslopes to the intermontane basins and further to the foreland. In a highly sensitive high-mountain environment like this, even small changes in the spatiotemporal distribution, magnitude and rates of extreme events may strongly impact environmental conditions, anthropogenic activity, and the well-being of mountain communities and beyond. However, although the NW Argentine Andes comprise the catchments for the La Plata river that traverses one of the most populated and economically relevant areas of South America, there are only few detailed investigations of climate variability and extreme hydro-meteorological events. In this thesis, I focus on deciphering the spatiotemporal variability of rainfall and river discharge, with particular emphasis on extreme hydro-meteorological events in the subtropical southern Central Andes of NW Argentina during the past seven decades. I employ various methods to assess and quantify statistically significant trend patterns of rainfall and river discharge, integrating high-quality daily time series from gauging stations (40 rainfall and 8 river discharge stations) with gridded datasets (CPC-uni and TRMM 3B42 V7), for the period between 1940 and 2015. Evidence for a general intensification of the hydrological cycle at intermediate elevations (~ 0.5 - 3 km asl) at the eastern flank of the southern Central Andes is found both from rainfall and river-discharge time-series analysis during the period from 1940 to 2015. This intensification is associated with the increase of the annual total amount of rainfall and the mean annual discharge. However, most pronounced trends are found at high percentiles, i.e. extreme hydro-meteorological events, particularly during the wet season from December to February.An important outcome of my studies is the recognition of a rapid increase in the amount of river discharge during the period between 1971 and 1977, most likely linked to the 1976-77 global climate shift, which is associated with the North Pacific Ocean sea surface temperature variability. Interestingly, after this rapid increase, both rainfall and river discharge decreased at low and intermediate elevations along the eastern flank of the Andes. In contrast, during the same time interval, at high elevations, extensive areas on the arid Puna de Atacama plateau have recorded increasing annual rainfall totals. This has been associated with more intense extreme hydro-meteorological events from 1979 to 2014. This part of the study reveals that low-, intermediate, and high-elevation sectors in the Andes of NW Argentina respond differently to changing climate conditions. Possible forcing mechanisms of the pronounced hydro-meteorological variability observed in the study area are also investigated. For the period between 1940 and 2015, I analyzed modes of oscillation of river discharge from small to medium drainage basins (102 to 104 km2), located on the eastern flank of the orogen. First, I decomposed the relevant monthly time series using the Hilbert-Huang Transform, which is particularly appropriate for non-stationary time series that result from non-linear natural processes. I observed that in the study region discharge variability can be described by five quasi-periodic oscillatory modes on timescales varying from 1 to ~20 years. Secondly, I tested the link between river-discharge variations and large-scale climate modes of variability, using different climate indices, such as the BEST ENSO (Bivariate El Ni{\~n}o-Southern Oscillation Time-series) index. This analysis reveals that, although most of the variance on the annual timescale is associated with the South American Monsoon System, a relatively large part of river-discharge variability is linked to Pacific Ocean variability (PDO phases) at multi-decadal timescales (~20 years). To a lesser degree, river discharge variability is also linked to the Tropical South Atlantic (TSA) sea surface temperature anomaly at multi-annual timescales (~2-5 years). Taken together, these findings exemplify the high degree of sensitivity of high-mountain environments with respect to climatic variability and change. This is particularly true for the topographic transitions between the humid, low-moderate elevations and the semi-arid to arid highlands of the southern Central Andes. Even subtle changes in the hydro-meteorological regime of these areas of the mountain belt react with major impacts on erosional hillslope processes and generate mass movements that fundamentally impact the transport capacity of mountain streams. Despite more severe storms in these areas, the fluvial system is characterized by pronounced variability of the stream power on different timescales, leading to cycles of sediment aggradation, the loss of agriculturally used land and severe impacts on infrastructure.}, language = {en} } @phdthesis{Schroen2016, author = {Schr{\"o}n, Martin}, title = {Cosmic-ray neutron sensing and its applications to soil and land surface hydrology}, publisher = {Verlag Dr. Hut GmbH}, address = {M{\"u}nchen}, isbn = {978-3-8439-3139-7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-395433}, school = {Universit{\"a}t Potsdam}, pages = {223}, year = {2016}, abstract = {Water scarcity, adaption on climate change, and risk assessment of droughts and floods are critical topics for science and society these days. Monitoring and modeling of the hydrological cycle are a prerequisite to understand and predict the consequences for weather and agriculture. As soil water storage plays a key role for partitioning of water fluxes between the atmosphere, biosphere, and lithosphere, measurement techniques are required to estimate soil moisture states from small to large scales. The method of cosmic-ray neutron sensing (CRNS) promises to close the gap between point-scale and remote-sensing observations, as its footprint was reported to be 30 ha. However, the methodology is rather young and requires highly interdisciplinary research to understand and interpret the response of neutrons to soil moisture. In this work, the signal of nine detectors has been systematically compared, and correction approaches have been revised to account for meteorological and geomagnetic variations. Neutron transport simulations have been consulted to precisely characterize the sensitive footprint area, which turned out to be 6--18 ha, highly local, and temporally dynamic. These results have been experimentally confirmed by the significant influence of water bodies and dry roads. Furthermore, mobile measurements on agricultural fields and across different land use types were able to accurately capture the various soil moisture states. It has been further demonstrated that the corresponding spatial and temporal neutron data can be beneficial for mesoscale hydrological modeling. Finally, first tests with a gyrocopter have proven the concept of airborne neutron sensing, where increased footprints are able to overcome local effects. This dissertation not only bridges the gap between scales of soil moisture measurements. It also establishes a close connection between the two worlds of observers and modelers, and further aims to combine the disciplines of particle physics, geophysics, and soil hydrology to thoroughly explore the potential and limits of the CRNS method.}, language = {en} } @phdthesis{Simon2016, author = {Simon, Sebastian}, title = {Der Einfluss der Koordination von Spurenelementen in silikatischen und aluminosilikatischen Schmelzen auf Elementverteilungsprozesse in magmatischen Systemen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-100932}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 138}, year = {2016}, abstract = {Das Wissen um die lokale Struktur von Seltenen Erden Elementen (SEE) in silikatischen und aluminosilikatischen Schmelzen ist von fundamentalem Interesse f{\"u}r die Geochemie der magmatischen Prozesse, speziell wenn es um ein umfassendes Verst{\"a}ndnis der Verteilungsprozesse von SEE in magmatischen Systemen geht. Es ist allgemein akzeptiert, dass die SEE-Verteilungsprozesse von Temperatur, Druck, Sauerstofffugazit{\"a}t (im Fall von polyvalenten Kationen) und der Kristallchemie kontrolliert werden. Allerdings ist wenig {\"u}ber den Einfluss der Schmelzzusammensetzung selbst bekannt. Ziel dieser Arbeit ist, eine Beziehung zwischen der Variation der SEE-Verteilung mit der Schmelzzusammensetzung und der Koordinationschemie dieser SEE in der Schmelze zu schaffen. Dazu wurden Schmelzzusammensetzungen von Prowatke und Klemme (2005), welche eine deutliche {\"A}nderung der Verteilungskoeffizienten zwischen Titanit und Schmelze ausschließlich als Funktion der Schmelzzusammensetzung zeigen, sowie haplogranitische bzw. haplobasaltische Schmelzzusammensetzungen als Vertreter magmatischer Systeme mit La, Gd, Yb und Y dotiert und als Glas synthetisiert. Die Schmelzen variierten systematisch im Aluminiums{\"a}ttigungsindex (ASI), welcher bei den Prowatke und Klemme (2005) Zusammensetzungen einen Bereich von 0.115 bis 0.768, bei den haplogranitischen Zusammensetzungen einen Bereich von 0.935 bis 1.785 und bei den haplobasaltischen Zusammensetzungen einen Bereich von 0.368 bis 1.010 abdeckt. Zus{\"a}tzlich wurden die haplogranitischen Zusammensetzungen mit 4 \% H2O synthetisiert, um den Einfluss von Wasser auf die lokale Umgebung von SEE zu studieren. Um Informationen {\"u}ber die lokalen Struktur von Gd, Yb und Y zu erhalten wurde die R{\"o}ntgenabsorptionsspektroskopie angewendet. Dabei liefert die Untersuchung der Feinstruktur mittels der EXAFS-Spektroskopie (engl. Extended X-Ray Absorption Fine Structure) quantitative Informationen {\"u}ber die lokale Umgebung, w{\"a}hrend RIXS (engl. resonant inelastic X-ray scattering), sowie die daraus extrahierte hoch aufgel{\"o}ste Nahkantenstruktur, XANES (engl. X-ray absorption near edge structure) qualitative Informationen {\"u}ber m{\"o}gliche Koordinations{\"a}nderungen von La, Gd und Yb in den Gl{\"a}sern liefert. Um m{\"o}gliche Unterschiede der lokalen Struktur oberhalb der Glastransformationstemperatur (TG) zur Raumtemperatur zu untersuchen, wurden exemplarisch Hochtemperatur Y-EXAFS Untersuchungen durchgef{\"u}hrt. F{\"u}r die Auswertung der EXAFS-Messungen wurde ein neu eingef{\"u}hrter Histogramm-Fit verwendet, der auch nicht-symmetrische bzw. nichtgaußf{\"o}rmige Paarverteilungsfunktionen beschreiben kann, wie sie bei einem hohen Grad der Polymerisierung bzw. bei hohen Temperaturen auftreten k{\"o}nnen. Die Y-EXAFS-Spektren f{\"u}r die Prowatke und Klemme (2005) Zusammensetzungen zeigen mit Zunahme des ASI, eine Zunahme der Asymmetrie und Breite der Y-O Paarverteilungsfunktion, welche sich in sich in der {\"A}nderung der Koordinationszahl von 6 nach 8 und einer Zunahme des Y-O Abstand um 0.13{\AA} manifestiert. Ein {\"a}hnlicher Trend l{\"a}sst sich auch f{\"u}r die Gd- und Yb-EXAFS-Spektren beobachten. Die hoch aufgel{\"o}sten XANESSpektren f{\"u}r La, Gd und Yb zeigen, dass sich die strukturellen Unterschiede zumindest halb-quantitativ bestimmen lassen. Dies gilt insbesondere f{\"u}r {\"A}nderungen im mittleren Abstand zu den Sauerstoffatomen. Im Vergleich zur EXAFS-Spektroskopie liefert XANES jedoch keine Informationen {\"u}ber die Form und Breite von Paarverteilungsfunktionen. Die Hochtemperatur EXAFS-Untersuchungen von Y zeigen {\"A}nderungen der lokalen Struktur oberhalb der Glas{\"u}bergangstemperatur an, welche sich vordergr{\"u}ndig auf eine thermisch induzierte Erh{\"o}hung des mittleren Y-O Abstandes zur{\"u}ckf{\"u}hren lassen. Allerdings zeigt ein Vergleich der Y-O Abst{\"a}nde f{\"u}r Zusammensetzungen mit einem ASI von 0.115 bzw. 0.755, ermittelt bei Raumtemperatur und TG, dass der im Glas beobachtete strukturelle Unterschied entlang der Zusammensetzungsserie in der Schmelze noch st{\"a}rker ausfallen kann, als bisher f{\"u}r die Gl{\"a}ser angenommen wurde. Die direkte Korrelation der Verteilungsdaten von Prowatke und Klemme (2005) mit den strukturellen {\"A}nderungen der Schmelzen offenbart f{\"u}r Y eine lineare Korrelation, wohingegen Yb und Gd eine nicht lineare Beziehung zeigen. Aufgrund seines Ionenradius und seiner Ladung wird das 6-fach koordinierte SEE in den niedriger polymerisierten Schmelzen bevorzugt durch nicht-br{\"u}ckenbildende Sauerstoffatome koordiniert, um stabile Konfigurationen zu bilden. In den h{\"o}her polymerisierten Schmelzen mit ASI-Werten in der N{\"a}he von 1 ist 6-fache Koordination nicht m{\"o}glich, da fast nur noch br{\"u}ckenbildende Sauerstoffatome zur Verf{\"u}gung stehen. Die {\"U}berbindung von br{\"u}ckenbildenden Sauerstoffatomen um das SEE wird durch Erh{\"o}hung der Koordinationszahl und des mittleren SEE-O Abstandes ausgeglichen. Dies bedeutet eine energetisch g{\"u}nstigere Konfiguration in den st{\"a}rker depolymerisierten Zusammensetzungen, aus welcher die beobachtete Variation des Verteilungskoeffizienten resultiert, welcher sich jedoch f{\"u}r jedes Element stark unterscheidet. F{\"u}r die haplogranitischen und haplobasaltischen Zusammensetzungen wurde mit Zunahme der Polymerisierung auch eine Zunahme der Koordinationszahl und des durchschnittlichen Bindungsabstands, einhergehend mit der Zunahme der Schiefe und der Asymmetrie der Paarverteilungsfunktion, beobachtet. Dies impliziert, dass das jeweilige SEE mit Zunahme der Polymerisierung auch inkompatibler in diesen Zusammensetzungen wird. Weiterhin zeigt die Zugabe von Wasser, dass die Schmelzen depolymerisieren, was in einer symmetrischeren Paarverteilungsfunktion resultiert, wodurch die Kompatibilit{\"a}t wieder zunimmt. Zusammenfassend zeigt sich, dass die Ver{\"a}nderungen der Schmelzzusammensetzungen in einer {\"A}nderung der Polymerisierung der Schmelzen resultieren, die dann einen signifikanten Einfluss auf die lokale Umgebung der SEE hat. Die strukturellen {\"A}nderungen lassen sich direkt mit Verteilungsdaten korrelieren, die Trends unterscheiden sich aber stark zwischen leichten, mittleren und schweren SEE. Allerdings konnte diese Studie zeigen, in welcher Gr{\"o}ßenordnung die {\"A}nderungen liegen m{\"u}ssen, um einen signifikanten Einfluss auf den Verteilungskoeffizenten zu haben. Weiterhin zeigt sich, dass der Einfluss der Schmelzzusammensetzung auf die Verteilung der Spurenelemente mit Zunahme der Polymerisierung steigt und daher nicht vernachl{\"a}ssigt werden darf.}, language = {de} } @techreport{AgarwalBoessenkoolFischeretal.2016, author = {Agarwal, Ankit and Boessenkool, Berry and Fischer, Madlen and Hahn, Irene and K{\"o}hn, Lisei and Laudan, Jonas and Moran, Thomas and {\"O}zt{\"u}rk, Ugur and Riemer, Adrian and R{\"o}zer, Viktor and Sieg, Tobias and Vogel, Kristin and Wendi, Dadiyorto and Bronstert, Axel and Thieken, Annegret}, title = {Die Sturzflut in Braunsbach, Mai 2016}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-394881}, pages = {20}, year = {2016}, abstract = {Im Graduiertenkolleg NatRiskChange der Universit{\"a}t Potsdam und anderen Forschungseinrichtungen werden beobachtete sowie zuk{\"u}nftig m{\"o}gliche Ver{\"a}nderungen von Naturgefahren untersucht. Teil des strukturierten Doktorandenprogramms sind sogenannte Task-Force-Eins{\"a}tze, bei denen die Promovierende zeitlich begrenzt ein aktuelles Ereignis auswerten. Im Zuge dieser Aktivit{\"a}t wurde die Sturzflut vom 29.05.2016 in Braunsbach (Baden-W{\"u}rttemberg) untersucht. In diesem Bericht werden erste Auswertungen zur Einordnung der Niederschl{\"a}ge, zu den hydrologischen und geomorphologischen Prozessen im Einzugsgebiet des Orlacher Bachs sowie zu den verursachten Sch{\"a}den beleuchtet. Die Region war Zentrum extremer Regenf{\"a}lle in der Gr{\"o}ßenordnung von 100 mm innerhalb von 2 Stunden. Das 6 km² kleine Einzugsgebiet hat eine sehr schnelle Reaktionszeit, zumal bei vorges{\"a}ttigtem Boden. Im steilen Bachtal haben mehrere kleinere und gr{\"o}ßere Hangrutschungen {\"u}ber 8000 m³ Ger{\"o}ll, Schutt und Schwemmholz in das Gew{\"a}sser eingetragen und m{\"o}glicherweise kurzzeitige Aufstauungen und Durchbr{\"u}che verursacht. Neben den großen Wassermengen mit einer Abflussspitze in einer Gr{\"o}ßenordnung von 100 m³/s hat gerade die Geschiebefracht zu großen Sch{\"a}den an den Geb{\"a}uden entlang des Bachlaufs in Braunsbach gef{\"u}hrt.}, language = {de} } @phdthesis{Dannberg2016, author = {Dannberg, Juliane}, title = {Dynamics of mantle plumes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-91024}, school = {Universit{\"a}t Potsdam}, pages = {162}, year = {2016}, abstract = {Mantle plumes are a link between different scales in the Earth's mantle: They are an important part of large-scale mantle convection, transporting material and heat from the core-mantle boundary to the surface, but also affect processes on a smaller scale, such as melt generation and transport and surface magmatism. When they reach the base of the lithosphere, they cause massive magmatism associated with the generation of large igneous provinces, and they can be related to mass extinction events (Wignall, 2001) and continental breakup (White and McKenzie, 1989). Thus, mantle plumes have been the subject of many previous numerical modelling studies (e.g. Farnetani and Richards, 1995; d'Acremont et al., 2003; Lin and van Keken, 2005; Sobolev et al., 2011; Ballmer et al., 2013). However, complex mechanisms, such as the development and implications of chemical heterogeneities in plumes, their interaction with mid-ocean ridges and global mantle flow, and melt ascent from the source region to the surface are still not very well understood; and disagreements between observations and the predictions of classical plume models have led to a challenge of the plume concept in general (Czamanske et al., 1998; Anderson, 2000; Foulger, 2011). Hence, there is a need for more sophisticated models that can explain the underlying physics, assess which properties and processes are important, explain how they cause the observations visible at the Earth's surface and provide a link between the different scales. In this work, integrated plume models are developed that investigate the effect of dense recycled oceanic crust on the development of mantle plumes, plume-ridge interaction under the influence of global mantle flow and melting and melt migration in form of two-phase flow. The presented analysis of these models leads to a new, updated picture of mantle plumes: Models considering a realistic depth-dependent density of recycled oceanic crust and peridotitic mantle material show that plumes with excess temperatures of up to 300 K can transport up to 15\% of recycled oceanic crust through the whole mantle. However, due to the high density of recycled crust, plumes can only advance to the base of the lithosphere directly if they have high excess temperatures, high plume volumes and the lowermost mantle is subadiabatic, or plumes rise from the top or edges of thermo-chemical piles. They might only cause minor surface uplift, and instead of the classical head-tail structure, these low-buoyancy plumes are predicted to be broad features in the lower mantle with much less pronounced plume heads. They can form a variety of shapes and regimes, including primary plumes directly advancing to the base of the lithosphere, stagnating plumes, secondary plumes rising from the core-mantle boundary or a pool of eclogitic material in the upper mantle and failing plumes. In the upper mantle, plumes are tilted and deflected by global mantle flow, and the shape, size and stability of the melting region is influenced by the distance from nearby plate boundaries, the speed of the overlying plate and the movement of the plume tail arriving from the lower mantle. Furthermore, the structure of the lithosphere controls where hot material is accumulated and melt is generated. In addition to melting in the plume tail at the plume arrival position, hot plume material flows upwards towards opening rifts, towards mid-ocean ridges and towards other regions of thinner lithosphere, where it produces additional melt due to decompression. This leads to the generation of either broad ridges of thickened magmatic crust or the separation into multiple thinner lines of sea mount chains at the surface. Once melt is generated within the plume, it influences its dynamics, lowering the viscosity and density, and while it rises the melt volume is increased up to 20\% due to decompression. Melt has the tendency to accumulate at the top of the plume head, forming diapirs and initiating small-scale convection when the plume reaches the base of the lithosphere. Together with the introduced unstable, high-density material produced by freezing of melt, this provides an efficient mechanism to thin the lithosphere above plume heads. In summary, this thesis shows that mantle plumes are more complex than previously considered, and linking the scales and coupling the physics of different processes occurring in mantle plumes can provide insights into how mantle plumes are influenced by chemical heterogeneities, interact with the lithosphere and global mantle flow, and are affected by melting and melt migration. Including these complexities in geodynamic models shows that plumes can also have broad plume tails, might produce only negligible surface uplift, can generate one or several volcanic island chains in interaction with a mid-ocean ridge, and can magmatically thin the lithosphere.}, language = {en} } @phdthesis{Marc2016, author = {Marc, Odin}, title = {Earthquake-induced landsliding}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-96808}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 171}, year = {2016}, abstract = {Earthquakes deform Earth's surface, building long-lasting topographic features and contributing to landscape and mountain formation. However, seismic waves produced by earthquakes may also destabilize hillslopes, leading to large amounts of soil and bedrock moving downslope. Moreover, static deformation and shaking are suspected to damage the surface bedrock and therefore alter its future properties, affecting hydrological and erosional dynamics. Thus, earthquakes participate both in mountain building and stimulate directly or indirectly their erosion. Moreover, the impact of earthquakes on hillslopes has important implications for the amount of sediment and organic matter delivered to rivers, and ultimately to oceans, during episodic catastrophic seismic crises, the magnitude of life and property losses associated with landsliding, the perturbation and recovery of landscape properties after shaking, and the long term topographic evolution of mountain belts. Several of these aspects have been addressed recently through individual case studies but additional data compilation as well as theoretical or numerical modelling are required to tackle these issues in a more systematic and rigorous manner. This dissertation combines data compilation of earthquake characteristics, landslide mapping, and seismological data interpretation with physically-based modeling in order to address how earthquakes impact on erosional processes and landscape evolution. Over short time scales (10-100 s) and intermediate length scales (10 km), I have attempted to improve our understanding and ability to predict the amount of landslide debris triggered by seismic shaking in epicentral areas. Over long time scales (1-100 ky) and across a mountain belt (100 km) I have modeled the competition between erosional unloading and building of topography associated with earthquakes. Finally, over intermediate time scales (1-10 y) and at the hillslope scale (0.1-1 km) I have collected geomorphological and seismological data that highlight persistent effects of earthquakes on landscape properties and behaviour. First, I compiled a database on earthquakes that produced significant landsliding, including an estimate of the total landslide volume and area, and earthquake characteristics such as seismic moment and source depth. A key issue is the accurate conversion of landslide maps into volume estimates. Therefore I also estimated how amalgamation - when mapping errors lead to the bundling of multiple landslide into a single polygon - affects volume estimates from various earthquake-induced landslide inventories and developed an algorithm to automatically detect this artifact. The database was used to test a physically-based prediction of the total landslide area and volume caused by earthquakes, based on seismological scaling relationships and a statistical description of the landscape properties. The model outperforms empirical fits in accuracy, with 25 out of 40 cases well predicted, and allows interpretation of many outliers in physical terms. Apart from seismological complexities neglected by the model I found that exceptional rock strength properties or antecedent conditions may explain most outliers. Second, I assessed the geomorphic effects of large earthquakes on landscape dynamics by surveying the temporal evolution of precipitation-normalized landslide rate. I found strongly elevated landslide rates following earthquakes that progressively recover over 1 to 4 years, indicating that regolith strength drops and recovers. The relaxation is clearly non-linear for at least one case, and does not seem to correlate with coseismic landslide reactivation, water table level increase or tree root-system recovery. I suggested that shallow bedrock is damaged by the earthquake and then heals on annual timescales. Such variations in ground strength must be translated into shallow subsurface seismic velocities that are increasingly surveyed with ambient seismic noise correlations. With seismic noise autocorrelation I computed the seismic velocity in the epicentral areas of three earthquakes where I constrained a change in landslide rate. We found similar recovery dynamics and timescales, suggesting that seismic noise correlation techniques could be further developed to meaningfully assess ground strength variations for landscape dynamics. These two measurements are also in good agreement with the temporal dynamics of post-seismic surface displacement measured by GPS. This correlation suggests that the surface healing mechanism may be driven by tectonic deformation, and that the surface regolith and fractured bedrock may behave as a granular media that slowly compacts as it is sheared or vibrated. Last, I compared our model of earthquake-induced landsliding with a standard formulation of surface deformation caused by earthquakes to understand which parameters govern the competition between the building and destruction of topography caused by earthquakes. In contrast with previous studies I found that very large (Mw>8) earthquakes always increase the average topography, whereas only intermediate (Mw ~ 7) earthquakes in steep landscapes may reduce topography. Moreover, I illustrated how the net effect of earthquakes varies with depth or landscape steepness implying a complex and ambivalent role through the life of a mountain belt. Further I showed that faults producing a Gutenberg-Richter distribution of earthquake sizes, will limit topography over a larger range of fault sizes than faults producing repeated earthquakes with a characteristic size.}, language = {en} } @misc{DietrichSchweigertSteidletal.2016, author = {Dietrich, Ottfried and Schweigert, Susanne and Steidl, J{\"o}rg and Lischeid, Gunnar}, title = {Effects of data and model simplification on the results of a wetland water resource management model}, series = {Water}, journal = {Water}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407579}, pages = {19}, year = {2016}, abstract = {This paper presents the development of a wetland water balance model for use in a large river basin with many different wetlands. The basic model was primarily developed for a single wetland with a complex water management system involving large amounts of specialized input data and water management details. The aim was to simplify the model structure and to use only commonly available data as input for the model, with the least possible loss of accuracy. Results from different variants of the model and data adaptation were tested against results from a detailed model. This shows that using commonly available data and unifying and simplifying the input data is tolerable up to a certain level. The simplification of the model has greater effects on the evaluated water balance components than the data adaptation. Because this simplification was necessary for large-scale use, we suggest that, for reasons of comparability, simpler models should always be applied with uniform data bases for large regions, though these should only be moderately simplified. Further, we recommend using these simplified models only for large-scale comparisons and using more specific, detailed models for investigations on smaller scales.}, language = {en} } @misc{QiuKruegerWilkeetal.2016, author = {Qiu, Chen and Kr{\"u}ger, Yves and Wilke, Max and Marti, Dominik and Rička, Jaro and Frenz, Martin}, title = {Exploration of the phase diagram of liquid water in the low-temperature metastable region using synthetic fluid inclusions}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-394993}, pages = {15}, year = {2016}, abstract = {We present new experimental data of the low-temperature metastable region of liquid water derived from high-density synthetic fluid inclusions (996-916 kg m-3) in quartz. Microthermometric measurements include: (i) prograde (upon heating) and retrograde (upon cooling) liquid-vapour homogenisation. We used single ultrashort laser pulses to stimulate vapour bubble nucleation in initially monophase liquid inclusions. Water densities were calculated based on prograde homogenisation temperatures using the IAPWS-95 formulation. We found retrograde liquid-vapour homogenisation temperatures in excellent agreement with IAPWS-95. (ii) Retrograde ice nucleation. Raman spectroscopy was used to determine the nucleation of ice in the absence of the vapour bubble. Our ice nucleation data in the doubly metastable region are inconsistent with the low-temperature trend of the spinodal predicted by IAPWS-95, as liquid water with a density of 921 kg m-3 remains in a homogeneous state during cooling down to a temperature of -30.5 °C, where it is transformed into ice whose density corresponds to zero pressure. (iii) Ice melting. Ice melting temperatures of up to 6.8 °C were measured in the absence of the vapour bubble, i.e. in the negative pressure region. (iv) Spontaneous retrograde and, for the first time, prograde vapour bubble nucleation. Prograde bubble nucleation occurred upon heating at temperatures above ice melting. The occurrence of prograde and retrograde vapour bubble nucleation in the same inclusions indicates a maximum of the bubble nucleation curve in the ϱ-T plane at around 40 °C. The new experimental data represent valuable benchmarks to evaluate and further improve theoretical models describing the p-V-T properties of metastable water in the low-temperature region.}, language = {en} } @misc{VuilleminFrieseAlawietal.2016, author = {Vuillemin, Aur{\`e}le and Friese, Andr{\´e} and Alawi, Mashal and Henny, Cynthia and Nomosatryo, Sulung and Wagner, Dirk and Crowe, Sean A. and Kallmeyer, Jens}, title = {Geomicrobiological features of ferruginous sediments from Lake Towuti, Indonesia}, series = {Frontiers in microbiology}, journal = {Frontiers in microbiology}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407312}, pages = {16}, year = {2016}, abstract = {Lake Towuti is a tectonic basin, surrounded by ultramafic rocks. Lateritic soils form through weathering and deliver abundant iron (oxy)hydroxides but very little sulfate to the lake and its sediment. To characterize the sediment biogeochemistry, we collected cores at three sites with increasing water depth and decreasing bottom water oxygen concentrations. Microbial cell densities were highest at the shallow site a feature we attribute to the availability of labile organic matter (OM) and the higher abundance of electron acceptors due to oxic bottom water conditions. At the two other sites, OM degradation and reduction processes below the oxycline led to partial electron acceptor depletion. Genetic information preserved in the sediment as extracellular DNA (eDNA) provided information on aerobic and anaerobic heterotrophs related to Nitrospirae. Chloroflexi, and Therrnoplasmatales. These taxa apparently played a significant role in the degradation of sinking OM. However, eDNA concentrations rapidly decreased with core depth. Despite very low sulfate concentrations, sulfate-reducing bacteria were present and viable in sediments at all three sites, as confirmed by measurement of potential sulfate reduction rates. Microbial community fingerprinting supported the presence of taxa related to Deltaproteobacteria and Firmicutes with demonstrated capacity for iron and sulfate reduction. Concomitantly, sequences of Ruminococcaceae, Clostridiales, and Methanornicrobiales indicated potential for fermentative hydrogen and methane production. Such first insights into ferruginous sediments showed that microbial populations perform successive metabolisms related to sulfur, iron, and methane. In theory, iron reduction could reoxidize reduced sulfur compounds and desorb OM from iron minerals to allow remineralization to methane. Overall, we found that biogeochemical processes in the sediments can be linked to redox differences in the bottom waters of the three sites, like oxidant concentrations and the supply of labile OM. At the scale of the lacustrine record, our geomicrobiological study should provide a means to link the extant subsurface biosphere to past environments.}, language = {en} } @phdthesis{Draeger2016, author = {Dr{\"a}ger, Nadine}, title = {Holocene climate and environmental variability in NE Germany inferred from annually laminated lake sediments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103037}, school = {Universit{\"a}t Potsdam}, pages = {xv, 144 Seiten}, year = {2016}, abstract = {Understanding the role of natural climate variability under the pressure of human induced changes of climate and landscapes, is crucial to improve future projections and adaption strategies. This doctoral thesis aims to reconstruct Holocene climate and environmental changes in NE Germany based on annually laminated lake sediments. The work contributes to the ICLEA project (Integrated CLimate and Landscape Evolution Analyses). ICLEA intends to compare multiple high-resolution proxy records with independent chronologies from the N central European lowlands, in order to disentangle the impact of climate change and human land use on landscape development during the Lateglacial and Holocene. In this respect, two study sites in NE Germany are investigated in this doctoral project, Lake Tiefer See and palaeolake Wukenfurche. While both sediment records are studied with a combination of high-resolution sediment microfacies and geochemical analyses (e.g. µ-XRF, carbon geochemistry and stable isotopes), detailed proxy understanding mainly focused on the continuous 7.7 m long sediment core from Lake Tiefer See covering the last ~6000 years. Three main objectives are pursued at Lake Tiefer See: (1) to perform a reliable and independent chronology, (2) to establish microfacies and geochemical proxies as indicators for climate and environmental changes, and (3) to trace the effects of climate variability and human activity on sediment deposition. Addressing the first aim, a reliable chronology of Lake Tiefer See is compiled by using a multiple-dating concept. Varve counting and tephra findings form the chronological framework for the last ~6000 years. The good agreement with independent radiocarbon dates of terrestrial plant remains verifies the robustness of the age model. The resulting reliable and independent chronology of Lake Tiefer See and, additionally, the identification of nine tephras provide a valuable base for detailed comparison and synchronization of the Lake Tiefer See data set with other climate records. The sediment profile of Lake Tiefer See exhibits striking alternations between well-varved and non-varved sediment intervals. The combination of microfacies, geochemical and microfossil (i.e. Cladocera and diatom) analyses indicates that these changes of varve preservation are caused by variations of lake circulation in Lake Tiefer See. An exception is the well-varved sediment deposited since AD 1924, which is mainly influenced by human-induced lake eutrophication. Well-varved intervals before the 20th century are considered to reflect phases of reduced lake circulation and, consequently, stronger anoxic conditions. Instead, non-varved intervals indicate increased lake circulation in Lake Tiefer See, leading to more oxygenated conditions at the lake ground. Furthermore, lake circulation is not only influencing sediment deposition, but also geochemical processes in the lake. As, for example, the proxy meaning of δ13COM varies in time in response to changes of the oxygen regime in the lake hypolinion. During reduced lake circulation and stronger anoxic conditions δ13COM is influenced by microbial carbon cycling. In contrast, organic matter degradation controls δ13COM during phases of intensified lake circulation and more oxygenated conditions. The varve preservation indicates an increasing trend of lake circulation at Lake Tiefer See after ~4000 cal a BP. This trend is superimposed by decadal to centennial scale variability of lake circulation intensity. Comparison to other records in Central Europe suggests that the long-term trend is probably related to gradual changes in Northern Hemisphere orbital forcing, which induced colder and windier conditions in Central Europe and, therefore, reinforced lake circulation. Decadal to centennial scale periods of increased lake circulation coincide with settlement phases at Lake Tiefer See, as inferred from pollen data of the same sediment record. Deforestation reduced the wind shelter of the lake, which probably increased the sensitivity of lake circulation to wind stress. However, results of this thesis also suggest that several of these phases of increased lake circulation are additionally reinforced by climate changes. A first indication is provided by the comparison to the Baltic Sea record, which shows striking correspondence between major non-varved intervals at Lake Tiefer See and bioturbated sediments in the Baltic Sea. Furthermore, a preliminary comparison to the ICLEA study site Lake Czechowskie (N central Poland) shows a coincidence of at least three phases of increased lake circulation in both lakes, which concur with periods of known climate changes (2.8 ka event, 'Migration Period' and 'Little Ice Age'). These results suggest an additional over-regional climate forcing also on short term increased of lake circulation in Lake Tiefer See. In summary, the results of this thesis suggest that lake circulation at Lake Tiefer See is driven by a combination of long-term and short-term climate changes as well as of anthropogenic deforestation phases. Furthermore, the lake circulation drives geochemical cycles in the lake affecting the meaning of proxy data. Therefore, the work presented here expands the knowledge of climate and environmental variability in NE Germany. Furthermore, the integration of the Lake Tiefer See multi-proxy record in a regional comparison with another ICLEA side, Lake Czechowskie, enabled to better decipher climate changes and human impact on the lake system. These first results suggest a huge potential for further detailed regional comparisons to better understand palaeoclimate dynamics in N central Europe.}, language = {en} } @phdthesis{Grewe2016, author = {Grewe, Sina}, title = {Hydro- and biogeochemical investigations of lake sediments in the Kenyan Rift Valley}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98342}, school = {Universit{\"a}t Potsdam}, pages = {110}, year = {2016}, abstract = {Die Seen im kenianischen Riftsystem bieten die einmalige Gelegenheit eine große Bandbreite an hydrochemischen Umweltbedingungen zu studieren, die von S{\"u}ßwasserseen bis hin zu hochsalinen und alkalinen Seen reichen. Da wenig {\"u}ber die hydro- und biogeochemischen Bedingungen in den darunterliegenden Seesedimenten bekannt ist, war es das Ziel dieser Arbeit, bereits existierende Datens{\"a}tze mit Daten aus der Porenwasser- und Biomarker-Analyse zu erweitern. Zus{\"a}tzlich wurden reduzierte Schwefelkomponenten und Sulfatreduktionsraten in den Sedimenten bestimmt. Mit den neu gewonnenen Daten wurde der anthropogene und mikrobielle Einfluss auf die Seesedimente untersucht sowie der Einfluss der Wasserchemie auf den Abbau und den Erhalt von organischem Material im Sediment. Zu den untersuchten Seen geh{\"o}rten: Logipi, Eight (ein kleiner Kratersee in der Region Kangirinyang), Baringo, Bogoria, Naivasha, Oloiden und Sonachi. Die Biomarker-Zusammensetzungen in den untersuchten Seesedimenten waren {\"a}hnlich; allerdings gab es einige Unterschiede zwischen den salinen Seen und den S{\"u}ßwasserseen. Einer dieser Unterschiede war das Vorkommen eines mit β-Carotin verwandten Molek{\"u}ls, das nur in den salinen Seen gefunden wurde. Dieses Molek{\"u}l stammt wahrscheinlich von Cyanobakterien, Einzellern die in großer Anzahl in salinen Seen vorkommen. In den beiden S{\"u}ßwasserseen wurde Stigmasterol gefunden, ein f{\"u}r S{\"u}ßwasseralgen charakteristisches Sterol. In dieser Studie hat sich gezeigt, dass Bogoria und Sonachi f{\"u}r Umweltrekonstruktionen mit Biomarkern besonders gut geeignet sind, da die Abwesenheit von Sauerstoff an deren Seegr{\"u}nden den Abbau von organischem Material verlangsamt. Andere Seen, wie zum Beispiel Naivasha, sind aufgrund des großen anthropogenen Einflusses weniger gut f{\"u}r solche Rekonstruktionen geeignet. Die Biomarker-Analyse bot jedoch die M{\"o}glichkeit, den menschlichen Einfluss auf den See zu studieren. Desweiteren zeigte diese Studie, dass sich Horizonte mit einem hohen Anteil an elementarem Schwefel als temporale Marker nutzen lassen. Diese Horizonte wurden zu einer Zeit abgelagert, als die Wasserpegel sehr niedrig waren. Der Schwefel wurde von Mikroorganismen abgelagert, die zu anoxygener Photosynthese oder Sulfidoxidation f{\"a}hig sind.}, language = {en} } @misc{AdhikariGlombitzaNickeletal.2016, author = {Adhikari, Rishi Ram and Glombitza, Clemens and Nickel, Julia C. and Anderson, Chloe H. and Dunlea, Ann G. and Spivack, Arthur J. and Murray, Richard W. and D'Hondt, Steven and Kallmeyer, Jens}, title = {Hydrogen utilization potential in subsurface sediments}, series = {Frontiers in microbiology}, journal = {Frontiers in microbiology}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407678}, pages = {16}, year = {2016}, abstract = {Subsurface microbial communities undertake many terminal electron-accepting processes, often simultaneously. Using a tritium-based assay, we measured the potential hydrogen oxidation catalyzed by hydrogenase enzymes in several subsurface sedimentary environments (Lake Van, Barents Sea, Equatorial Pacific, and Gulf of Mexico) with different predominant electron-acceptors. Hydrogenases constitute a diverse family of enzymes expressed by microorganisms that utilize molecular hydrogen as a metabolic substrate, product, or intermediate. The assay reveals the potential for utilizing molecular hydrogen and allows qualitative detection of microbial activity irrespective of the predominant electron-accepting process. Because the method only requires samples frozen immediately after recovery, the assay can be used for identifying microbial activity in subsurface ecosystems without the need to preserve live material. We measured potential hydrogen oxidation rates in all samples from multiple depths at several sites that collectively span a wide range of environmental conditions and biogeochemical zones. Potential activity normalized to total cell abundance ranges over five orders of magnitude and varies, dependent upon the predominant terminal electron acceptor. Lowest per-cell potential rates characterize the zone of nitrate reduction and highest per-cell potential rates occur in the methanogenic zone. Possible reasons for this relationship to predominant electron acceptor include (i) increasing importance of fermentation in successively deeper biogeochemical zones and (ii) adaptation of H(2)ases to successively higher concentrations of H-2 in successively deeper zones.}, language = {en} } @phdthesis{Kaethner2016, author = {K{\"a}thner, Jana}, title = {Interaction of spatial variability characterized by soil electrical conductivity and plant water status related to generative growth of fruit trees}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-397666}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 104, IV}, year = {2016}, abstract = {Precision horticulture beschreibt ein neues Bewirtschaftungskonzept im Gartenbau, bei dem teilfl{\"a}chenspezifisch oder an den Einzelbaum angepasste Maßnahmen eine ressourcenschonende, intensitve Produktion erm{\"o}glichen. Die Datengrundlage wird aus r{\"a}umlich aufgel{\"o}sten Messungen aus der Produktionsanlage gewonnen, wobei sowohl kurzfristige Faktoren wie der effektive Pflanzenwasserzustand als auch langfristige Faktoren wie die Bodenvariabilit{\"a}t zur Informationsgewinnung genutzt werden k{\"o}nnen. Die vorliegende Arbeit umfasst eine Untersuchung der scheinbaren elektrischen Leitf{\"a}higkeit des Bodens (ECa), des Pflanzenwasserzustandes und der Fruchtqualit{\"a}t (zum Beispiel: Fruchtgr{\"o}ße) bei Prunus domestica L. (Pflaume) und Citrus x aurantium, Syn. Citrus paradisi (Grapefruit). Zielsetzungen der vorliegenden Arbeit waren (i) die Charakterisierung der 3D-Verteilung der scheinbaren elektrischen Leitf{\"a}higkeit des Bodens und Variabilit{\"a}t des Pflanzenwasserzustandes; (ii) die Untersuchung der Interaktion zwischen ECa, kumulativer Wassernutzungseffizienz (WUEc) und des crop water stress index (CWSI) bezogen auf die Fruchtqualit{\"a}t sowie (iii) eine M{\"o}glichkeit zur Einteilung von einzelnen B{\"a}umen hinsichtlich der Bew{\"a}sserung. Dazu fanden die Hauptuntersuchungen in der Pflaumenanlage statt. Diese Obstanlage befindet sich in Hanglage (3°) auf pleistoz{\"a}nen und postpleistoz{\"a}nen Substraten in semi-humiden Klima (Potsdam, Deutschland) und umfasst eine Fl{\"a}che von 0,37 ha mit 156 B{\"a}umen der Kultursorte ˈTophit Plusˈ auf der Unterlage Wavit. Die Anlage wurde 2009 mit ein und zwei-j{\"a}hrigen B{\"a}umen in einem Pflanzabstand von 4 m entlang der Bew{\"a}sserung und 5 m zwischen den Reihen angelegt. Dreimal pro Woche wurden die B{\"a}ume mit einer 50 cm {\"u}ber dem Boden installierten Tr{\"o}pfchenbew{\"a}sserung mit 1,6 l pro Baum bew{\"a}ssert. Mit Hilfe geoelektrischer Messungen wurde die scheinbare elektrische Leitf{\"a}higkeit des Oberbodens (0,25 m) mit einem Elektrodenabstand von 0,5 m (4-point light hp) an jedem Baum gemessen. Dadurch wurde die Anlage hinsichtlich ECa r{\"a}umlich charakterisiert. Zus{\"a}tzlich erfolgten Tomographiemessungen zur 3D-Charakterisierung der ECa und punktuell die Beprobung von Bohrlochprofilen bis 1 m Tiefe. Die vegetativen, generativen und Fruchtqualit{\"a}tsdaten wurden an jedem Baum erhoben. Der momentane Pflanzenwasserzustand wurde mit der etablierten Scholander-Methode zur Wasserpotentialanalyse (Scholander Bombe) punktuell und mit Thermalaufnahmen fl{\"a}chendeckend bestimmt. Die Thermalaufnahmen erfolgten mit einer Infrarot-Kamera (ThermaCam SC 500), die auf einem Traktor in 3,3 m H{\"o}he {\"u}ber dem Boden montiert war. Die Thermalaufnahmen (320 x 240 Pixel) der Kronenoberfl{\"a}che wurden mit einem {\"O}ffnungswinkel von 45° und einer geometrischen Aufl{\"o}sung von 6,41 mm x 8,54 mm aufgenommen. Mit Hilfe der Kronentemperatur aus den Thermalbildern und den Temperaturen eines nassen und trockenen Referenzblattes wurde der CWSI berechnet. Es wurde die Anpassung des CWSI f{\"u}r die Messung in semi-humidem Klima erarbeitet, wobei die Erhebung der Referenztemperaturen automatisiert aus den Thermalbildern erfolgte. Die Boniturdaten wurden mit Hilfe eines Varianz-Stabilisierungsverfahrens in eine Normalverteilung transformiert. Die statistischen Analysen sowie die automatisierte Auswertungsroutine erfolgten mit eigenen Skripten in MATLAB® (R2010b sowie R2016a) und einem freien Programm (spatialtoolbox). Die Hot-spot Analysen dienten der Pr{\"u}fung, ob ein beobachtetes Muster statistisch signifikant ist. Evaluiert wurde die Methode mit der etablierten k-mean Analyse. Zum Testen der Hot-spot Analyse wurden ECa, Stammumfang und Ertrag Daten aus einer Grapefruitanlage (Adana, T{\"u}rkei) mit 179 B{\"a}umen auf einem Boden vom Typ Xerofkuvent mit toniger und tonig-lehmiger Textur herangezogen. Die {\"U}berpr{\"u}fung der Interaktion zwischen den kritischen Werten aus den Boden- und Pflanzenwasserzustandsinformationen zu den vegetativen und generativen Pflanzenwachtumsvariablen erfolgte durch die Anwendung der ANOVA und die Ermittlung des Korrelationskoeffizienten. In der Arbeit konnte gezeigt werden, dass die Variabilit{\"a}t der Boden- und Pflanzeninformationen in Obstanlagen auch kleinr{\"a}umig hoch ist. Es konnte gezeigt werden, dass die r{\"a}umlich gefundenen Muster in den ECa {\"u}ber die Jahre zwischen 2011-2012 (r = 0.88) beziehungsweise 2012-2013 (r = 0.71) stabil geblieben sind. Zum anderen wurde gezeigt, dass eine CWSI-Bestimmung auch im semi-humiden Klima m{\"o}glich ist. Es wurde ein Zusammenhang (r = - 0.65, p < 0.0001) mit der etablierten Methode der Blattwasser-potentialanalyse ermittelt. Die Interaktion zwischen der ECa aus verschiedenen Tiefen und den Pflanzenvariablen ergab einen hoch signifikanten Zusammenhang mit dem Oberboden, in dem das Bew{\"a}sserungswasser zu finden war. Es wurde eine Korrelation zwischen Ertrag und ECatopsoil von r = 0.52 ermittelt. Durch die Anwendung der Hot-spot Analyse konnten Extremwerte in den r{\"a}umlichen Daten ermittelt werden. Diese Extrema dienten zur Einteilung der Zonen in cold-spot, random und hot-spot. Die random Zone weist die h{\"o}chsten Korrelationen zu den Pflanzenvariablen auf. Ferner konnte gezeigt werden, dass bereits im semi-humiden Klima der Pflanzenwasserstatus entscheidend zur Fruchtqualit{\"a}t beitr{\"a}gt. Zusammenfassend l{\"a}sst sich sagen, dass die r{\"a}umliche Variabilit{\"a}t der Fruchtqualit{\"a}t durch die Interaktion von Wassernutzungseffizienz und CWSI sowie in geringerem Maße durch den ECa des Bodens. In der Pflaumenanlage im semi-humiden Klima war die Bew{\"a}sserung ausschlaggebend f{\"u}r die Produktion von qualitativ hochwertigen Fr{\"u}chten.}, language = {en} } @phdthesis{Mey2016, author = {Mey, J{\"u}rgen}, title = {Intermontane valley fills}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103158}, school = {Universit{\"a}t Potsdam}, pages = {xii, 111}, year = {2016}, abstract = {Sedimentary valley fills are a widespread characteristic of mountain belts around the world. They transiently store material over time spans ranging from thousands to millions of years and therefore play an important role in modulating the sediment flux from the orogen to the foreland and to oceanic depocenters. In most cases, their formation can be attributed to specific fluvial conditions, which are closely related to climatic and tectonic processes. Hence, valley-fill deposits constitute valuable archives that offer fundamental insight into landscape evolution, and their study may help to assess the impact of future climate change on sediment dynamics. In this thesis I analyzed intermontane valley-fill deposits to constrain different aspects of the climatic and tectonic history of mountain belts over multiple timescales. First, I developed a method to estimate the thickness distribution of valley fills using artificial neural networks (ANNs). Based on the assumption of geometrical similarity between exposed and buried parts of the landscape, this novel and highly automated technique allows reconstructing fill thickness and bedrock topography on the scale of catchments to entire mountain belts. Second, I used the new method for estimating the spatial distribution of post-glacial sediments that are stored in the entire European Alps. A comparison with data from exploratory drillings and from geophysical surveys revealed that the model reproduces the measurements with a root mean squared error (RMSE) of 70m and a coefficient of determination (R2) of 0.81. I used the derived sediment thickness estimates in combination with a model of the Last Glacial Maximum (LGM) icecap to infer the lithospheric response to deglaciation, erosion and deposition, and deduce their relative contribution to the present-day rock-uplift rate. For a range of different lithospheric and upper mantle-material properties, the results suggest that the long-wavelength uplift signal can be explained by glacial isostatic adjustment with a small erosional contribution and a substantial but localized tectonic component exceeding 50\% in parts of the Eastern Alps and in the Swiss Rh{\^o}ne Valley. Furthermore, this study reveals the particular importance of deconvolving the potential components of rock uplift when interpreting recent movements along active orogens and how this can be used to constrain physical properties of the Earth's interior. In a third study, I used the ANN approach to estimate the sediment thickness of alluviated reaches of the Yarlung Tsangpo River, upstream of the rapidly uplifting Namche Barwa massif. This allowed my colleagues and me to reconstruct the ancient river profile of the Yarlung Tsangpo, and to show that in the past, the river had already been deeply incised into the eastern margin of the Tibetan Plateau. Dating of basal sediments from drill cores that reached the paleo-river bed to 2-2.5 Ma are consistent with mineral cooling ages from the Namche Barwa massif, which indicate initiation of rapid uplift at ~4 Ma. Hence, formation of the Tsangpo gorge and aggradation of the voluminous valley fill was most probably a consequence of rapid uplift of the Namche Barwa massif and thus tectonic activity. The fourth and last study focuses on the interaction of fluvial and glacial processes at the southeastern edge of the Karakoram. Paleo-ice-extent indicators and remnants of a more than 400-m-thick fluvio-lacustrine valley fill point to blockage of the Shyok River, a main tributary of the upper Indus, by the Siachen Glacier, which is the largest glacier in the Karakoram Range. Field observations and 10Be exposure dating attest to a period of recurring lake formation and outburst flooding during the penultimate glaciation prior to ~110 ka. The interaction of Rivers and Glaciers all along the Karakorum is considered a key factor in landscape evolution and presumably promoted headward erosion of the Indus-Shyok drainage system into the western margin of the Tibetan Plateau. The results of this thesis highlight the strong influence of glaciation and tectonics on valley-fill formation and how this has affected the evolution of different mountain belts. In the Alps valley-fill deposition influenced the magnitude and pattern of rock uplift since ice retreat approximately 17,000 years ago. Conversely, the analyzed valley fills in the Himalaya are much older and reflect environmental conditions that prevailed at ~110 ka and ~2.5 Ma, respectively. Thus, the newly developed method has proven useful for inferring the role of sedimentary valley-fill deposits in landscape evolution on timescales ranging from 1,000 to 10,000,000 years.}, language = {en} } @misc{SiegmundSandersHeinrichetal.2016, author = {Siegmund, Jonatan Frederik and Sanders, Tanja G. M. and Heinrich, Ingo and Maaten, Ernst van der and Simard, Sonia and Helle, Gerhard and Donner, Reik Volker}, title = {Meteorological drivers of extremes in daily stem radius variations of beech, oak, and pine in Northeastern Germany}, series = {Frontiers in plant science}, journal = {Frontiers in plant science}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407943}, pages = {14}, year = {2016}, abstract = {Observed recent and expected future increases in frequency and intensity of climatic extremes in central Europe may pose critical challenges for domestic tree species. Continuous dendrometer recordings provide a valuable source of information on tree stem radius variations, offering the possibility to study a tree's response to environmental influences at a high temporal resolution. In this study, we analyze stem radius variations (SRV) of three domestic tree species (beech, oak, and pine) from 2012 to 2014. We use the novel statistical approach of event coincidence analysis (ECA) to investigate the simultaneous occurrence of extreme daily weather conditions and extreme SRVs, where extremes are defined with respect to the common values at a given phase of the annual growth period. Besides defining extreme events based on individual meteorological variables, we additionally introduce conditional and joint ECA as new multivariate extensions of the original methodology and apply them for testing 105 different combinations of variables regarding their impact on SRV extremes. Our results reveal a strong susceptibility of all three species to the extremes of several meteorological variables. Yet, the inter-species differences regarding their response to the meteorological extremes are comparatively low. The obtained results provide a thorough extension of previous correlation-based studies by emphasizing on the timings of climatic extremes only. We suggest that the employed methodological approach should be further promoted in forest research regarding the investigation of tree responses to changing environmental conditions.}, language = {en} } @phdthesis{Osudar2016, author = {Osudar, Roman}, title = {Methane distribution and oxidation across aquatic interfaces}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-96799}, school = {Universit{\"a}t Potsdam}, pages = {vii, 170}, year = {2016}, abstract = {The increase in atmospheric methane concentration, which is determined by an imbalance between its sources and sinks, has led to investigations of the methane cycle in various environments. Aquatic environments are of an exceptional interest due to their active involvement in methane cycling worldwide and in particular in areas sensitive to climate change. Furthermore, being connected with each other aquatic environments form networks that can be spread on vast areas involving marine, freshwater and terrestrial ecosystems. Thus, aquatic systems have a high potential to translate local or regional environmental and subsequently ecosystem changes to a bigger scale. Many studies neglect this connectivity and focus on individual aquatic or terrestrial ecosystems. The current study focuses on environmental controls of the distribution and aerobic oxidation of methane at the example of two aquatic ecosystems. These ecosystems are Arctic fresh water bodies and the Elbe estuary which represent interfaces between freshwater-terrestrial and freshwater-marine environments, respectively. Arctic water bodies are significant atmospheric sources of methane. At the same time the methane cycle in Arctic water bodies is strongly affected by the surrounding permafrost environment, which is characterized by high amounts of organic carbon. The results of this thesis indicate that the methane concentrations in Arctic lakes and streams substantially vary between each other being regulated by local landscape features (e.g. floodplain area) and the morphology of the water bodies (lakes, streams and river). The highest methane concentrations were detected in the lake outlets and in a floodplain lake complex. In contrast, the methane concentrations measured at different sites of the Lena River did not vary substantially. The lake complexes in comparison to the Lena River, thus, appear as more individual and heterogeneous systems with a pronounced imprint of the surrounding soil environment. Furthermore, connected with each other Arctic aquatic environments have a large potential to transport methane from methane-rich water bodies such as streams and floodplain lakes to aquatic environments relatively poor in methane such as the Lena River. Estuaries represent hot spots of oceanic methane emissions. Also, estuaries are intermediate zones between methane-rich river water and methane depleted marine water. Substantiated through this thesis at the example of the Elbe estuary, the methane distribution in estuaries, however, cannot entirely be described by the conservative mixing model i.e. gradual decrease from the freshwater end-member to the marine water end-member. In addition to the methane-rich water from the Elbe River mouth substantial methane input occurs from tidal flats, areas of significant interaction between aquatic and terrestrial environments. Thus, this study demonstrates the complex interactions and their consequences for the methane distribution within estuaries. Also it reveals how important it is to investigate estuaries at larger spatial scales. Methane oxidation (MOX) rates are commonly correlated with methane concentrations. This was shown in previous research studies and was substantiated by the present thesis. In detail, the highest MOX rates in the Arctic water bodies were detected in methane-rich streams and in the floodplain area while in the Elbe estuary the highest MOX rates were observed at the coastal stations. However, in these bordering environments, MOX rates are affected not only via the regulation through methane concentrations. The MOX rates in the Arctic lakes were shown to be also dependent on the abundance and community composition of methane-oxidising bacteria (MOB), that in turn are controlled by local landscape features (regardless of the methane concentrations) and by the transport of MOB between neighbouring environments. In the Elbe estuary, the MOX rates in addition to the methane concentrations are largely affected by the salinity, which is in turn regulated by the mixing of fresh- and marine waters. The magnitude of the salinity impact on MOX rates thereby depends on the MOB community composition and on the rate of the salinity change. This study extends our knowledge of environmental controls of methane distribution and aerobic methane oxidation in aquatic environments. It also illustrates how important it is to investigate complex ecosystems rather than individual ecosystems to better understand the functioning of whole biomes.}, language = {en} } @phdthesis{Roers2016, author = {Roers, Michael}, title = {Methoden zur Dynamisierung von Klimafolgenanalysen im Elbegebiet}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98844}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 141}, year = {2016}, abstract = {Die Elbe und ihr Einzugsgebiet sind vom Klimawandel betroffen. Um die Wirkkette von projizierten Klimaver{\"a}nderungen auf den Wasserhaushalt und die daraus resultierenden N{\"a}hrstoffeintr{\"a}ge und -frachten f{\"u}r große Einzugsgebiete wie das der Elbe zu analysieren, k{\"o}nnen integrierte Umweltmodellsysteme eingesetzt werden. Fallstudien, die mit diesen Modellsystemen ad hoc durchgef{\"u}hrt werden, repr{\"a}sentieren den Istzustand von Modellentwicklungen und -unsicherheiten und sind damit statisch. Diese Arbeit beschreibt den Einstieg in die Dynamisierung von Klimafolgenanalysen im Elbegebiet. Dies umfasst zum einen eine Plausibilit{\"a}tspr{\"u}fung von Auswirkungsrechnungen, die mit Szenarien des statistischen Szenariengenerators STARS durchgef{\"u}hrt wurden, durch den Vergleich mit den Auswirkungen neuerer Klimaszenarien aus dem ISI-MIP Projekt, die dem letzten Stand der Klimamodellierung entsprechen. Hierf{\"u}r wird ein integriertes Modellsystem mit "eingefrorenem Entwicklungsstand" verwendet. Die Klimawirkungsmodelle bleiben dabei unver{\"a}ndert. Zum anderen wird ein Bestandteil des integrierten Modellsystems - das {\"o}kohydrologische Modell SWIM - zu einer "live"-Version weiterentwickelt. Diese wird durch punktuelle Testung an langj{\"a}hrigen Versuchsreihen eines Lysimeterstandorts sowie an aktuellen Abflussreihen validiert und verbessert. Folgende Forschungsfragen werden bearbeitet: (i) Welche Effekte haben unterschiedliche Klimaszenarien auf den Wasserhaushalt im Elbegebiet und ist eine Neubewertung der Auswirkung des Klimawandels auf den Wasserhaushalt notwendig?, (ii) Was sind die Auswirkungen des Klimawandels auf die N{\"a}hrstoffeintr{\"a}ge und -frachten im Elbegebiet sowie die Wirksamkeit von Maßnahmen zur Reduktion der N{\"a}hrstoffeintr{\"a}ge?, (iii) Ist unter der Nutzung (selbst einer sehr geringen Anzahl) verf{\"u}gbarer tagesaktueller Witterungsdaten in einem stark heterogenen Einzugsgebiet eine valide Ansprache der aktuellen {\"o}kohydrologischen Situation des Elbeeinzugsgebiets m{\"o}glich? Die aktuellen Szenarien best{\"a}tigen die Richtung, jedoch nicht das Ausmaß der Klimafolgen: Die R{\"u}ckg{\"a}nge des mittleren j{\"a}hrlichen Gesamtabflusses und der monatlichen Abfl{\"u}sse an den Pegeln bis Mitte des Jahrhunderts betragen f{\"u}r das STARS-Szenario ca. 30 \%. Die R{\"u}ckg{\"a}nge bei den auf dem ISI-MIP-Szenario basierenden Modellstudien liegen hingegen nur bei ca. 10 \%. Hauptursachen f{\"u}r diese Divergenz sind die Unterschiede in den Niederschlagsprojektionen sowie die Unterschiede in der jahreszeitlichen Verteilung der Erw{\"a}rmung. Im STARS-Szenario gehen methodisch bedingt die Niederschl{\"a}ge zur{\"u}ck und der Winter erw{\"a}rmt sich st{\"a}rker als der Sommer. In dem ISI-MIP-Szenario bleiben die Niederschl{\"a}ge nahezu stabil und die Erw{\"a}rmung im Sommer und Winter unterscheidet sich nur geringf{\"u}gig. Generell nehmen die N{\"a}hrstoffeintr{\"a}ge und -frachten mit den Abfl{\"u}ssen in beiden Szenarien unterproportional ab, wobei die Frachten jeweils st{\"a}rker als die Eintr{\"a}ge zur{\"u}ckgehen. Die konkreten Effekte der Abfluss{\"a}nderungen sind gering und liegen im einstelligen Prozentbereich. Gleiches gilt f{\"u}r die Unterschiede zwischen den Szenarien. Der Effekt von zwei ausgew{\"a}hlten Maßnahmen zur Reduktion der N{\"a}hrstoffeintr{\"a}ge und -frachten unterscheidet sich bei verschiedenen Abflussverh{\"a}ltnissen, repr{\"a}sentiert durch unterschiedliche Klimaszenarien in unterschiedlich feuchter Auspr{\"a}gung, ebenfalls nur geringf{\"u}gig. Die Beantwortung der ersten beiden Forschungsfragen zeigt, dass die Aktualisierung von Klimaszenarien in einem ansonsten "eingefrorenen" Verbund von {\"o}kohydrologischen Daten und Modellen eine wichtige Pr{\"u}foption f{\"u}r die Plausibilisierung von Klimafolgenanalysen darstellt. Sie bildet die methodische Grundlage f{\"u}r die Schlussfolgerung, dass bei der Wassermenge eine Neubewertung der Klimafolgen notwendig ist, w{\"a}hrend dies bei den N{\"a}hrstoffeintr{\"a}gen und -frachten nicht der Fall ist. Die zur Beantwortung der dritten Forschungsfrage mit SWIM-live durchgef{\"u}hrten Validierungsstudien ergeben Diskrepanzen am Lysimeterstandort und bei den Abfl{\"u}ssen aus den Teilgebieten Saale und Spree. Sie lassen sich zum Teil mit der notwendigen Interpolationsweite der Witterungsdaten und dem Einfluss von Wasserbewirtschaftungsmaßnahmen erkl{\"a}ren. Insgesamt zeigen die Validierungsergebnisse, dass schon die Pilotversion von SWIM-live f{\"u}r eine {\"o}kohydrologische Ansprache des Gebietswasserhaushaltes im Elbeeinzugsgebiet genutzt werden kann. SWIM-live erm{\"o}glicht eine unmittelbare Betrachtung und Beurteilung simulierter Daten. Dadurch werden Unsicherheiten bei der Modellierung direkt offengelegt und k{\"o}nnen infolge dessen reduziert werden. Zum einen f{\"u}hrte die Verdichtung der meteorologischen Eingangsdaten durch die Verwendung von nun ca. 700 anstatt 19 Klima- bzw. Niederschlagstationen zu einer Verbesserung der Ergebnisse. Zum anderen wurde SWIM-live beispielhaft f{\"u}r einen Zyklus aus punktueller Modellverbesserung und fl{\"a}chiger {\"U}berpr{\"u}fung der Simulationsergebnisse genutzt. Die einzelnen Teilarbeiten tragen jeweils zur Dynamisierung von Klimafolgenanalysen im Elbegebiet bei. Der Anlass hierf{\"u}r war durch die fehlerhaften methodischen Grundlagen von STARS gegeben. Die Sinnf{\"a}lligkeit der Dynamisierung ist jedoch nicht an diesen konkreten Anlass gebunden, sondern beruht auf der grundlegenden Einsicht, dass Ad-hoc-Szenarienanalysen immer auch pragmatische Vereinfachungen zugrunde liegen, die fortlaufend {\"u}berpr{\"u}ft werden m{\"u}ssen.}, language = {de} } @misc{GliegeThomasSteidletal.2016, author = {Gliege, Steffen and Thomas, Bj{\"o}rn Daniel and Steidl, J{\"o}rg and Hohenbrink, Tobias Ludwig and Dietrich, Ottfried}, title = {Modeling the impact of ditch water level management on stream-aquifer interactions}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407613}, pages = {17}, year = {2016}, abstract = {Decreasing groundwater levels in many parts of Germany and decreasing low flows in Central Europe have created a need for adaptation measures to stabilize the water balance and to increase low flows. The objective of our study was to estimate the impact of ditch water level management on stream-aquifer interactions in small lowland catchments of the mid-latitudes. The water balance of a ditch-irrigated area and fluxes between the subsurface and the adjacent stream were modeled for three runoff recession periods using the Hydrus-2D software package. The results showed that the subsurface flow to the stream was closely related to the difference between the water level in the ditch system and the stream. Evapotranspiration during the growing season additionally reduced base flow. It was crucial to stop irrigation during a recession period to decrease water withdrawal from the stream and enhance the base flow by draining the irrigated area. Mean fluxes to the stream were between 0.04 and 0.64 ls(-1) for the first 20 days of the low-flow periods. This only slightly increased the flow in the stream, whose mean was 57 ls(-1) during the period with the lowest flows. Larger areas would be necessary to effectively increase flows in mesoscale catchments.}, language = {en} } @phdthesis{Georgieva2016, author = {Georgieva, Viktoria}, title = {Neotectonics \& Cooling History of the Southern Patagonian Andes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-104185}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 200 Seiten}, year = {2016}, abstract = {The collision of bathymetric anomalies, such as oceanic spreading centers, at convergent plate margins can profoundly affect subduction dynamics, magmatism, and the structural and geomorphic evolution of the overriding plate. The Southern Patagonian Andes of South America are a prime example for sustained oceanic ridge collision and the successive formation and widening of an extensive asthenospheric slab window since the Middle Miocene. Several of the predicted upper-plate geologic manifestations of such deep-seated geodynamic processes have been studied in this region, but many topics remain highly debated. One of the main controversial topics is the interpretation of the regional low-temperature thermochronology exhumational record and its relationship with tectonic and/or climate-driven processes, ultimately manifested and recorded in the landscape evolution of the Patagonian Andes. The prominent along-strike variance in the topographic characteristics of the Andes, combined with coupled trends in low-temperature thermochronometer cooling ages have been interpreted in very contrasting ways, considering either purely climatic (i.e. glacial erosion) or geodynamic (slab-window related) controlling factors. This thesis focuses on two main aspects of these controversial topics. First, based on field observations and bedrock low-temperature thermochronology data, the thesis addresses an existing research gap with respect to the neotectonic activity of the upper plate in response to ridge collision - a mechanism that has been shown to affect the upper plate topography and exhumational patterns in similar tectonic settings. Secondly, the qualitative interpretation of my new and existing thermochronological data from this region is extended by inverse thermal modelling to define thermal histories recorded in the data and evaluate the relative importance of surface vs. geodynamic factors and their possible relationship with the regional cooling record. My research is centered on the Northern Patagonian Icefield (NPI) region of the Southern Patagonian Andes. This site is located inboard of the present-day location of the Chile Triple Junction - the juncture between the colliding Chile Rise spreading center and the Nazca and Antarctic Plates along the South American convergent margin. As such this study area represents the region of most recent oceanic-ridge collision and associated slab window formation. Importantly, this location also coincides with the abrupt rise in summit elevations and relief characteristics in the Southern Patagonian Andes. Field observations, based on geological, structural and geomorphic mapping, are combined with bedrock apatite (U-Th)/He and apatite fission track (AHe and AFT) cooling ages sampled along elevation transects across the orogen. This new data reveals the existence of hitherto unrecognized neotectonic deformation along the flanks of the range capped by the NPI. This deformation is associated with the closely spaced oblique collision of successive oceanic-ridge segments in this region over the past 6 Ma. I interpret that this has caused a crustal-scale partitioning of deformation and the decoupling, margin-parallel migration, and localized uplift of a large crustal sliver (the NPI block) along the subduction margin. The location of this uplift coincides with a major increase of summit elevations and relief at the northern edge of the NPI massif. This mechanism is compatible with possible extensional processes along the topographically subdued trailing edge of the NPI block as documented by very recent and possibly still active normal faulting. Taken together, these findings suggest a major structural control on short-wavelength variations in topography in the Southern Patagonian Andes - the region affected by ridge collision and slab window formation. The second research topic addressed here focuses on using my new and existing bedrock low-temperature cooling ages in forward and inverse thermal modeling. The data was implemented in the HeFTy and QTQt modeling platforms to constrain the late Cenozoic thermal history of the Southern Patagonian Andes in the region of the most recent upper-plate sectors of ridge collision. The data set combines AHe and AFT data from three elevation transects in the region of the Northern Patagonian Icefield. Previous similar studies claimed far-reaching thermal effects of the approaching ridge collision and slab window to affect patterns of Late Miocene reheating in the modelled thermal histories. In contrast, my results show that the currently available data can be explained with a simpler thermal history than previously proposed. Accordingly, a reheating event is not needed to reproduce the observations. Instead, the analyzed ensemble of modelled thermal histories defines a Late Miocene protracted cooling and Pliocene-to-recent stepwise exhumation. These findings agree with the geological record of this region. Specifically, this record indicates an Early Miocene phase of active mountain building associated with surface uplift and an active fold-and-thrust belt, followed by a period of stagnating deformation, peneplanation, and lack of synorogenic deposition in the Patagonian foreland. The subsequent period of stepwise exhumation likely resulted from a combination of pulsed glacial erosion and coeval neotectonic activity. The differences between the present and previously published interpretation of the cooling record can be reconciled with important inconsistencies of previously used model setup. These include mainly the insufficient convergence of the models and improper assumptions regarding the geothermal conditions in the region. This analysis puts a methodological emphasis on the prime importance of the model setup and the need for its thorough examination to evaluate the robustness of the final outcome.}, language = {en} } @phdthesis{Hoffmann2016, author = {Hoffmann, Bernd}, title = {Plant organic matter mobilization and export in fluvial systems}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-99336}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 131}, year = {2016}, abstract = {The global carbon cycle is closely linked to Earth's climate. In the context of continuously unchecked anthropogenic CO₂ emissions, the importance of natural CO₂ bond and carbon storage is increasing. An important biogenic mechanism of natural atmospheric CO₂ drawdown is the photosynthetic carbon fixation in plants and the subsequent longterm deposition of plant detritus in sediments. The main objective of this thesis is to identify factors that control mobilization and transport of plant organic matter (pOM) through rivers towards sedimentation basins. I investigated this aspect in the eastern Nepalese Arun Valley. The trans-Himalayan Arun River is characterized by a strong elevation gradient (205 - 8848 m asl) that is accompanied by strong changes in ecology and climate ranging from wet tropical conditions in the Himalayan forelad to high alpine tundra on the Tibetan Plateau. Therefore, the Arun is an excellent natural laboratory, allowing the investigation of the effect of vegetation cover, climate, and topography on plant organic matter mobilization and export in tributaries along the gradient. Based on hydrogen isotope measurements of plant waxes sampled along the Arun River and its tributaries, I first developed a model that allows for an indirect quantification of pOM contributed to the mainsetm by the Arun's tributaries. In order to determine the role of climatic and topographic parameters of sampled tributary catchments, I looked for significant statistical relations between the amount of tributary pOM export and tributary characteristics (e.g. catchment size, plant cover, annual precipitation or runoff, topographic measures). On one hand, I demonstrated that pOMsourced from the Arun is not uniformly derived from its entire catchment area. On the other, I showed that dense vegetation is a necessary, but not sufficient, criterion for high tributary pOM export. Instead, I identified erosion and rainfall and runoff as key factors controlling pOM sourcing in the Arun Valley. This finding is supported by terrestrial cosmogenic nuclide concentrations measured on river sands along the Arun and its tributaries in order to quantify catchment wide denudation rates. Highest denudation rates corresponded well with maximum pOM mobilization and export also suggesting the link between erosion and pOM sourcing. The second part of this thesis focusses on the applicability of stable isotope records such as plant wax n-alkanes in sediment archives as qualitative and quantitative proxy for the variability of past Indian Summer Monsoon (ISM) strength. First, I determined how ISM strength affects the hydrogen and oxygen stable isotopic composition (reported as δD and δ18O values vs. Vienna Standard Mean Ocean Water) of precipitation in the Arun Valley and if this amount effect (Dansgaard, 1964) is strong enough to be recorded in potential paleo-ISM isotope proxies. Second, I investigated if potential isotope records across the Arun catchment reflect ISM strength dependent precipitation δD values only, or if the ISM isotope signal is superimposed by winter precipitation or glacial melt. Furthermore, I tested if δD values of plant waxes in fluvial deposits reflect δD values of environmental waters in the respective catchments. I showed that surface water δD values in the Arun Valley and precipitation δD from south of the Himalaya both changed similarly during two consecutive years (2011 \& 2012) with distinct ISM rainfall amounts (~20\% less in 2012). In order to evaluate the effect of other water sources (Winter-Westerly precipitation, glacial melt) and evapotranspiration in the Arun Valley, I analysed satellite remote sensing data of rainfall distribution (TRMM 3B42V7), snow cover (MODIS MOD10C1), glacial coverage (GLIMSdatabase, Global Land Ice Measurements from Space), and evapotranspiration (MODIS MOD16A2). In addition to the predominant ISM in the entire catchment I found through stable isotope analysis of surface waters indications for a considerable amount of glacial melt derived from high altitude tributaries and the Tibetan Plateau. Remotely sensed snow cover data revealed that the upper portion of the Arun also receives considerable winter precipitation, but the effect of snow melt on the Arun Valley hydrology could not be evaluated as it takes place in early summer, several months prior to our sampling campaigns. However, I infer that plant wax records and other potential stable isotope proxy archives below the snowline are well-suited for qualitative, and potentially quantitative, reconstructions of past changes of ISM strength.}, language = {en} } @phdthesis{JaraMunoz2016, author = {Jara Mu{\~n}oz, Julius}, title = {Quantifying forearc deformation patterns using coastal geomorphic markers}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-102652}, school = {Universit{\"a}t Potsdam}, pages = {XXV, 213}, year = {2016}, abstract = {Rapidly uplifting coastlines are frequently associated with convergent tectonic boundaries, like subduction zones, which are repeatedly breached by giant megathrust earthquakes. The coastal relief along tectonically active realms is shaped by the effect of sea-level variations and heterogeneous patterns of permanent tectonic deformation, which are accumulated through several cycles of megathrust earthquakes. However, the correlation between earthquake deformation patterns and the sustained long-term segmentation of forearcs, particularly in Chile, remains poorly understood. Furthermore, the methods used to estimate permanent deformation from geomorphic markers, like marine terraces, have remained qualitative and are based on unrepeatable methods. This contrasts with the increasing resolution of digital elevation models, such as Light Detection and Ranging (LiDAR) and high-resolution bathymetric surveys. Throughout this thesis I study permanent deformation in a holistic manner: from the methods to assess deformation rates, to the processes involved in its accumulation. My research focuses particularly on two aspects: Developing methodologies to assess permanent deformation using marine terraces, and comparing permanent deformation with seismic cycle deformation patterns under different spatial scales along the M8.8 Maule earthquake (2010) rupture zone. Two methods are developed to determine deformation rates from wave-built and wave-cut terraces respectively. I selected an archetypal example of a wave-built terrace at Santa Maria Island studying its stratigraphy and recognizing sequences of reoccupation events tied with eleven radiocarbon sample ages (14C ages). I developed a method to link patterns of reoccupation with sea-level proxies by iterating relative sea level curves for a range of uplift rates. I find the best fit between relative sea-level and the stratigraphic patterns for an uplift rate of 1.5 +- 0.3 m/ka. A Graphical User Interface named TerraceM® was developed in Matlab®. This novel software tool determines shoreline angles in wave-cut terraces under different geomorphic scenarios. To validate the methods, I select test sites in areas of available high-resolution LiDAR topography along the Maule earthquake rupture zone and in California, USA. The software allows determining the 3D location of the shoreline angle, which is a proxy for the estimation of permanent deformation rates. The method is based on linear interpolations to define the paleo platform and cliff on swath profiles. The shoreline angle is then located by intersecting these interpolations. The accuracy and precision of TerraceM® was tested by comparing its results with previous assessments, and through an experiment with students in a computer lab setting at the University of Potsdam. I combined the methods developed to analyze wave-built and wave-cut terraces to assess regional patterns of permanent deformation along the (2010) Maule earthquake rupture. Wave-built terraces are tied using 12 Infra Red Stimulated luminescence ages (IRSL ages) and shoreline angles in wave-cut terraces are estimated from 170 aligned swath profiles. The comparison of coseismic slip, interseismic coupling, and permanent deformation, leads to three areas of high permanent uplift, terrace warping, and sharp fault offsets. These three areas correlate with regions of high slip and low coupling, as well as with the spatial limit of at least eight historical megathrust ruptures (M8-9.5). I propose that the zones of upwarping at Arauco and Topocalma reflect changes in frictional properties of the megathrust, which result in discrete boundaries for the propagation of mega earthquakes. To explore the application of geomorphic markers and quantitative morphology in offshore areas I performed a local study of patterns of permanent deformation inferred from hitherto unrecognized drowned shorelines at the Arauco Bay, at the southern part of the (2010) Maule earthquake rupture zone. A multidisciplinary approach, including morphometry, sedimentology, paleontology, 3D morphoscopy, and a landscape Evolution Model is used to recognize, map, and assess local rates and patterns of permanent deformation in submarine environments. Permanent deformation patterns are then reproduced using elastic models to assess deformation rates of an active submarine splay fault defined as Santa Maria Fault System. The best fit suggests a reverse structure with a slip rate of 3.7 m/ka for the last 30 ka. The register of land level changes during the earthquake cycle at Santa Maria Island suggest that most of the deformation may be accrued through splay fault reactivation during mega earthquakes, like the (2010) Maule event. Considering a recurrence time of 150 to 200 years, as determined from historical and geological observations, slip between 0.3 and 0.7 m per event would be required to account for the 3.7 m/ka millennial slip rate. However, if the SMFS slips only every ~1000 years, representing a few megathrust earthquakes, then a slip of ~3.5 m per event would be required to account for the long- term rate. Such event would be equivalent to a magnitude ~6.7 earthquake capable to generate a local tsunami. The results of this thesis provide novel and fundamental information regarding the amount of permanent deformation accrued in the crust, and the mechanisms responsible for this accumulation at millennial time-scales along the M8.8 Maule earthquake (2010) rupture zone. Furthermore, the results of this thesis highlight the application of quantitative geomorphology and the use of repeatable methods to determine permanent deformation, improve the accuracy of marine terrace assessments, and estimates of vertical deformation rates in tectonically active coastal areas. This is vital information for adequate coastal-hazard assessments and to anticipate realistic earthquake and tsunami scenarios.}, language = {en} } @misc{HollsteinSeglGuanteretal.2016, author = {Hollstein, Andr{\´e} and Segl, Karl and Guanter, Luis and Brell, Maximilian and Enesco, Marta}, title = {Ready-to-Use methods for the detection of clouds, cirrus, snow, shadow, water and clear sky pixels in Sentinel-2 MSI images}, series = {remote sensing}, journal = {remote sensing}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407938}, pages = {18}, year = {2016}, abstract = {Classification of clouds, cirrus, snow, shadows and clear sky areas is a crucial step in the pre-processing of optical remote sensing images and is a valuable input for their atmospheric correction. The Multi-Spectral Imager on board the Sentinel-2's of the Copernicus program offers optimized bands for this task and delivers unprecedented amounts of data regarding spatial sampling, global coverage, spectral coverage, and repetition rate. Efficient algorithms are needed to process, or possibly reprocess, those big amounts of data. Techniques based on top-of-atmosphere reflectance spectra for single-pixels without exploitation of external data or spatial context offer the largest potential for parallel data processing and highly optimized processing throughput. Such algorithms can be seen as a baseline for possible trade-offs in processing performance when the application of more sophisticated methods is discussed. We present several ready-to-use classification algorithms which are all based on a publicly available database of manually classified Sentinel-2A images. These algorithms are based on commonly used and newly developed machine learning techniques which drastically reduce the amount of time needed to update the algorithms when new images are added to the database. Several ready-to-use decision trees are presented which allow to correctly label about 91\% of the spectra within a validation dataset. While decision trees are simple to implement and easy to understand, they offer only limited classification skill. It improves to 98\% when the presented algorithm based on the classical Bayesian method is applied. This method has only recently been used for this task and shows excellent performance concerning classification skill and processing performance. A comparison of the presented algorithms with other commonly used techniques such as random forests, stochastic gradient descent, or support vector machines is also given. Especially random forests and support vector machines show similar classification skill as the classical Bayesian method.}, language = {en} } @phdthesis{Chen2016, author = {Chen, Kejie}, title = {Real-time GNSS for fast seismic source inversion and tsunami early warning}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-93174}, school = {Universit{\"a}t Potsdam}, pages = {xii, 81}, year = {2016}, abstract = {Over the past decades, rapid and constant advances have motivated GNSS technology to approach the ability to monitor transient ground motions with mm to cm accuracy in real-time. As a result, the potential of using real-time GNSS for natural hazards prediction and early warning has been exploited intensively in recent years, e.g., landslides and volcanic eruptions monitoring. Of particular note, compared with traditional seismic instruments, GNSS does not saturate or tilt in terms of co-seismic displacement retrieving, which makes it especially valuable for earthquake and earthquake induced tsunami early warning. In this thesis, we focus on the application of real-time GNSS to fast seismic source inversion and tsunami early warning. Firstly, we present a new approach to get precise co-seismic displacements using cost effective single-frequency receivers. As is well known, with regard to high precision positioning, the main obstacle for single-frequency GPS receiver is ionospheric delay. Considering that over a few minutes, the change of ionospheric delay is almost linear, we constructed a linear model for each satellite to predict ionospheric delay. The effectiveness of this method has been validated by an out-door experiment and 2011 Tohoku event, which confirms feasibility of using dense GPS networks for geo-hazard early warning at an affordable cost. Secondly, we extended temporal point positioning from GPS-only to GPS/GLONASS and assessed the potential benefits of multi-GNSS for co-seismic displacement determination. Out-door experiments reveal that when observations are conducted in an adversary environment, adding a couple of GLONASS satellites could provide more reliable results. The case study of 2015 Illapel Mw 8.3 earthquake shows that the biases between co-seismic displacements derived from GPS-only and GPS/GLONASS vary from station to station, and could be up to 2 cm in horizontal direction and almost 3 cm in vertical direction. Furthermore, slips inverted from GPS/GLONASS co-seismic displacements using a layered crust structure on a curved plane are shallower and larger for the Illapel event. Thirdly, we tested different inversion tools and discussed the uncertainties of using real-time GNSS for tsunami early warning. To be exact, centroid moment tensor inversion, uniform slip inversion using a single Okada fault and distributed slip inversion in layered crust on a curved plane were conducted using co-seismic displacements recorded during 2014 Pisagua earthquake. While the inversion results give similar magnitude and the rupture center, there are significant differences in depth, strike, dip and rake angles, which lead to different tsunami propagation scenarios. Even though, resulting tsunami forecasting along the Chilean coast is close to each other for all three models. Finally, based on the fact that the positioning performance of BDS is now equivalent to GPS in Asia-Pacific area and Manila subduction zone has been identified as a zone of potential tsunami hazard, we suggested a conceptual BDS/GPS network for tsunami early warning in South China Sea. Numerical simulations with two earthquakes (Mw 8.0 and Mw 7.5) and induced tsunamis demonstrate the viability of this network. In addition, the advantage of BDS/GPS over a single GNSS system by source inversion grows with decreasing earthquake magnitudes.}, language = {en} } @misc{ThiekenKienzlerKreibichetal.2016, author = {Thieken, Annegret and Kienzler, Sarah and Kreibich, Heidi and Kuhlicke, Christian and Kunz, Michael and M{\"u}hr, Bernhard and M{\"u}ller, Meike and Otto, Antje and Petrow, Theresia and Pisi, Sebastian and Schr{\"o}ter, Kai}, title = {Review of the flood risk management system in Germany after the major flood in 2013}, issn = {1866-8372}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-100600}, pages = {12}, year = {2016}, abstract = {Widespread flooding in June 2013 caused damage costs of €6 to 8 billion in Germany, and awoke many memories of the floods in August 2002, which resulted in total damage of €11.6 billion and hence was the most expensive natural hazard event in Germany up to now. The event of 2002 does, however, also mark a reorientation toward an integrated flood risk management system in Germany. Therefore, the flood of 2013 offered the opportunity to review how the measures that politics, administration, and civil society have implemented since 2002 helped to cope with the flood and what still needs to be done to achieve effective and more integrated flood risk management. The review highlights considerable improvements on many levels, in particular (1) an increased consideration of flood hazards in spatial planning and urban development, (2) comprehensive property-level mitigation and preparedness measures, (3) more effective flood warnings and improved coordination of disaster response, and (4) a more targeted maintenance of flood defense systems. In 2013, this led to more effective flood management and to a reduction of damage. Nevertheless, important aspects remain unclear and need to be clarified. This particularly holds for balanced and coordinated strategies for reducing and overcoming the impacts of flooding in large catchments, cross-border and interdisciplinary cooperation, the role of the general public in the different phases of flood risk management, as well as a transparent risk transfer system. Recurring flood events reveal that flood risk management is a continuous task. Hence, risk drivers, such as climate change, land-use changes, economic developments, or demographic change and the resultant risks must be investigated at regular intervals, and risk reduction strategies and processes must be reassessed as well as adapted and implemented in a dialogue with all stakeholders.}, language = {en} } @phdthesis{Teshebaeva2016, author = {Teshebaeva, Kanayim}, title = {SAR interferometry analysis of surface processes in the Pamir - Tien Shan active orogens - emphasis on coseismic deformation and landslides}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-96743}, school = {Universit{\"a}t Potsdam}, pages = {128}, year = {2016}, abstract = {This thesis presents new approaches of SAR methods and their application to tectonically active systems and related surface deformation. With 3 publications two case studies are presented: (1) The coseismic deformation related to the Nura earthquake (5th October 2008, magnitude Mw 6.6) at the eastern termination of the intramontane Alai valley. Located between the southern Tien Shan and the northern Pamir the coseismic surface displacements are analysed using SAR (Synthetic Aperture RADAR) data. The results show clear gradients in the vertical and horizontal directions along a complex pattern of surface ruptures and active faults. To integrate and to interpret these observations in the context of the regional active tectonics a SAR data analysis is complemented with seismological data and geological field observations. The main moment release of the Nura earthquake appears to be on the Pamir Frontal thrust, while the main surface displacements and surface rupture occurred in the footwall and along of the NE-SW striking Irkeshtam fault. With InSAR data from ascending and descending satellite tracks along with pixel offset measurements the Nura earthquake source is modelled as a segmented rupture. One fault segment corresponds to high-angle brittle faulting at the Pamir Frontal thrust and two more fault segments show moderate-angle and low-friction thrusting at the Irkeshtam fault. The integrated analysis of the coseismic deformation argues for a rupture segmentation and strain partitioning associated to the earthquake. It possibly activated an orogenic wedge in the easternmost segment of the Pamir-Alai collision zone. Further, the style of the segmentation may be associated with the presence of Paleogene evaporites. (2) The second focus is put on slope instabilities and consequent landslides in the area of prominent topographic transition between the Fergana basin and high-relief Alai range. The Alai range constitutes an active orogenic wedge of the Pamir - Tien Shan collision zone that described as a progressively northward propagating fold-and-thrust belt. The interferometric analysis of ALOS/PALSAR radar data integrates a period of 4 years (2007-2010) based on the Small Baseline Subset (SBAS) time-series technique to assess surface deformation with millimeter surface change accuracy. 118 interferograms are analyzed to observe spatially-continuous movements with downslope velocities up to 71 mm/yr. The obtained rates indicate slow movement of the deep-seated landslides during the observation time. We correlated these movements with precipitation and seismic records. The results suggest that the deformation peaks correlate with rainfall in the 3 preceding months and with one earthquake event. In the next step, to understand the spatial pattern of landslide processes, the tectonic morphologic and lithologic settings are combined with the patterns of surface deformation. We demonstrate that the lithological and tectonic structural patterns are the main controlling factors for landslide occurrence and surface deformation magnitudes. Furthermore active contractional deformation in the front of the orogenic wedge is the main mechanism to sustain relief. Some of the slower but continuously moving slope instabilities are directly related to tectonically active faults and unconsolidated young Quaternary syn-orogenic sedimentary sequences. The InSAR observed slow moving landslides represent active deep-seated gravitational slope deformation phenomena which is first time observed in the Tien Shan mountains. Our approach offers a new combination of InSAR techniques and tectonic aspects to localize and understand enhanced slope instabilities in tectonically active mountain fronts in the Kyrgyz Tien Shan.}, language = {en} } @misc{XiongStolleLuehretal.2016, author = {Xiong, Chao and Stolle, Claudia and L{\"u}hr, Hermann and Park, Jaeheung and Fejer, Bela G. and Kervalishvili, Guram N.}, title = {Scale analysis of equatorial plasma irregularities derived from Swarm constellation}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1112}, issn = {1866-8372}, doi = {10.25932/publishup-43184}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-431842}, pages = {14}, year = {2016}, abstract = {In this study, we investigated the scale sizes of equatorial plasma irregularities (EPIs) using measurements from the Swarm satellites during its early mission and final constellation phases. We found that with longitudinal separation between Swarm satellites larger than 0.4°, no significant correlation was found any more. This result suggests that EPI structures include plasma density scale sizes less than 44 km in the zonal direction. During the Swarm earlier mission phase, clearly better EPI correlations are obtained in the northern hemisphere, implying more fragmented irregularities in the southern hemisphere where the ambient magnetic field is low. The previously reported inverted-C shell structure of EPIs is generally confirmed by the Swarm observations in the northern hemisphere, but with various tilt angles. From the Swarm spacecrafts with zonal separations of about 150 km, we conclude that larger zonal scale sizes of irregularities exist during the early evening hours (around 1900 LT).}, language = {en} } @phdthesis{Dey2016, author = {Dey, Saptarshi}, title = {Tectonic and climatic control on the evolution of the Himalayan mountain front}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103390}, school = {Universit{\"a}t Potsdam}, pages = {xii, 118}, year = {2016}, abstract = {Variations in the distribution of mass within an orogen may lead to transient sediment storage, which in turn might affect the state of stress and the level of fault activity. Distinguishing between different forcing mechanisms causing variations of sediment flux and tectonic activity, is therefore one of the most challenging tasks in understanding the spatiotemporal evolution of active mountain belts. The Himalayan mountain belt is one of the most significant Cenozoic collisional mountain belt, formed due to collision between northward-bound Indian Plate and the Eurasian Plate during the last 55-50 Ma. Ongoing convergence of these two tectonic plates is accommodated by faulting and folding within the Himalayan arc-shaped orogen and the continued lateral and vertical growth of the Tibetan Plateau and mountain belts adjacent to the plateau as well as regions farther north. Growth of the Himalayan orogen is manifested by the development of successive south-vergent thrust systems. These thrust systems divide the orogen into different morphotectonic domains. From north to south these thrusts are the Main Central Thrust (MCT), the Main Boundary Thrust (MBT) and the Main Frontal Thrust (MFT). The growing topography interacts with moisture-bearing monsoonal winds, which results in pronounced gradients in rainfall, weathering, erosion and sediment transport toward the foreland and beyond. However, a fraction of this sediment is trapped and transiently stored within the intermontane valleys or 'dun's within the lower-elevation foothills of the range. Improved understanding of the spatiotemporal evolution of these sediment archives could provide a unique opportunity to decipher the triggers of variations in sediment production, delivery and storage in an actively deforming mountain belt and support efforts to test linkages between sediment volumes in intermontane basins and changes in the shallow crustal stress field. As sediment redistribution in mountain belts on timescales of 102-104 years can effect cultural characteristics and infrastructure in the intermontane valleys and may even impact the seismotectonics of a mountain belt, there is a heightened interest in understanding sediment-routing processes and causal relationships between tectonism, climate and topography. It is here at the intersection between tectonic processes and superposed climatic and sedimentary processes in the Himalayan orogenic wedge, where my investigation is focused on. The study area is the intermontane Kangra Basin in the northwestern Sub-Himalaya, because the characteristics of the different Himalayan morphotectonic provinces are well developed, the area is part of a region strongly influenced by monsoonal forcing, and the existence of numerous fluvial terraces provides excellent strain markers to assess deformation processes within the Himalayan orogenic wedge. In addition, being located in front of the Dhauladhar Range the region is characterized by pronounced gradients in past and present-day erosion and sediment processes associated with repeatedly changing climatic conditions. In light of these conditions I analysed climate-driven late Pleistocene-Holocene sediment cycles in this tectonically active region, which may be responsible for triggering the tectonic re-organization within the Himalayan orogenic wedge, leading to out-of-sequence thrusting, at least since early Holocene. The Kangra Basin is bounded by the MBT and the Sub-Himalayan Jwalamukhi Thrust (JMT) in the north and south, respectively and transiently stores sediments derived from the Dhauladhar Range. The Basin contains ~200-m-thick conglomerates reflecting two distinct aggradation phases; following aggradation, several fluvial terraces were sculpted into these fan deposits. 10Be CRN surface exposure dating of these terrace levels provides an age of 53.4±3.2 ka for the highest-preserved terrace (AF1); subsequently, this surface was incised until ~15 ka, when the second fan (AF2) began to form. AF2 fan aggradation was superseded by episodic Holocene incision, creating at least four terrace levels. We find a correlation between variations in sediment transport and ∂18O records from regions affected by the Indian Summer Monsoon (ISM). During strengthened ISMs sand post-LGM glacial retreat, aggradation occurred in the Kangra Basin, likely due to high sediment flux, whereas periods of a weakened ISM coupled with lower sediment supply coincided with renewed re-incision. However, the evolution of fluvial terraces along Sub-Himalayan streams in the Kangra sector is also forced by tectonic processes. Back-tilted, folded terraces clearly document tectonic activity of the JMT. Offset of one of the terrace levels indicates a shortening rate of 5.6±0.8 to 7.5±1.0 mm.a-1 over the last ~10 ka. Importantly, my study reveals that late Pleistocene/Holocene out-of-sequence thrusting accommodates 40-60\% of the total 14±2 mm.a-1 shortening partitioned throughout the Sub-Himalaya. Importantly, the JMT records shortening at a lower rate over longer timescales hints towards out-of-sequence activity within the Sub-Himalaya. Re-activation of the JMT could be related to changes in the tectonic stress field caused by large-scale sediment removal from the basin. I speculate that the deformation processes of the Sub-Himalaya behave according to the predictions of critical wedge model and assume the following: While >200m of sediment aggradation would trigger foreland-ward propagation of the deformation front, re-incision and removal of most of the stored sediments (nearly 80-85\% of the optimum basin-fill) would again create a sub-critical condition of the wedge taper and trigger the retreat of the deformation front. While tectonism is responsible for the longer-term processes of erosion associated with steepening hillslopes, sediment cycles in this environment are mainly the result of climatic forcing. My new 10Be cosmogenic nuclide exposure dates and a synopsis of previous studies show the late Pleistocene to Holocene alluvial fills and fluvial terraces studied here record periodic fluctuations of sediment supply and transport capacity on timescales of 1000-100000 years. To further evaluate the potential influence of climate change on these fluctuations, I compared the timing of aggradation and incision phases recorded within remnant alluvial fans and terraces with continental climate archives such as speleothems in neighboring regions affected by monsoonal precipitation. Together with previously published OSL ages yielding the timing of aggradation, I find a correlation between variations in sediment transport with oxygen-isotope records from regions affected by the Indian Summer Monsoon (ISM). Accordingly, during periods of increased monsoon intensity (transitions from dry and cold to wet and warm periods - MIS4 to MIS3 and MIS2 to MIS1) (MIS=marine isotope stage) and post-Last Glacial Maximum glacial retreat, aggradation occurred in the Kangra Basin, likely due to high sediment flux. Conversely, periods of weakened monsoon intensity or lower sediment supply coincide with re-incision of the existing basin-fill. Finally, my study entails part of a low-temperature thermochronology study to assess the youngest exhumation history of the Dhauladhar Range. Zircon helium (ZHe) ages and existing low-temperature data sets (ZHe, apatite fission track (AFT)) across this range, together with 3D thermokinematic modeling (PECUBE) reveals constraints on exhumation and activity of the range-bounding Main Boundary Thrust (MBT) since at least mid-Miocene time. The modeling results indicate mean slip rates on the MBT-fault ramp of ~2 - 3 mm.a-1 since its activation. This has lead to the growth of the >5-km-high frontal Dhauladhar Range and continuous deep-seated exhumation and erosion. The obtained results also provide interesting constraints of deformation patterns and their variation along strike. The results point towards the absence of the time-transient 'mid-crustal ramp' in the basal decollement and duplexing of the Lesser Himalayan sequence, unlike the nearby regions or even the central Nepal domain. A fraction of convergence (~10-15\%) is accommodated along the deep-seated MBT-ramp, most likely merging into the MHT. This finding is crucial for a rigorous assessment of the overall level of tectonic activity in the Himalayan morphotectonic provinces as it contradicts recently-published geodetic shortening estimates. In these studies, it has been proposed that the total Himalayan shortening in the NW Himalaya is accommodated within the Sub-Himalaya whereas no tectonic activity is assigned to the MBT.}, language = {en} } @misc{ThiekenBesselKienzleretal.2016, author = {Thieken, Annegret and Bessel, Tina and Kienzler, Sarah and Kreibich, Heidi and M{\"u}ller, Meike and Pisi, Sebastian and Schr{\"o}ter, Kai}, title = {The flood of June 2013 in Germany}, series = {National Hazards Earth System Science}, journal = {National Hazards Earth System Science}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-97207}, pages = {21}, year = {2016}, abstract = {In June 2013, widespread flooding and consequent damage and losses occurred in Central Europe, especially in Germany. This paper explores what data are available to investigate the adverse impacts of the event, what kind of information can be retrieved from these data and how well data and information fulfil requirements that were recently proposed for disaster reporting on the European and international levels. In accordance with the European Floods Directive (2007/60/EC), impacts on human health, economic activities (and assets), cultural heritage and the environment are described on the national and sub-national scale. Information from governmental reports is complemented by communications on traffic disruptions and surveys of flood-affected residents and companies. Overall, the impacts of the flood event in 2013 were manifold. The study reveals that flood-affected residents suffered from a large range of impacts, among which mental health and supply problems were perceived more seriously than financial losses. The most frequent damage type among affected companies was business interruption. This demonstrates that the current scientific focus on direct (financial) damage is insufficient to describe the overall impacts and severity of flood events. The case further demonstrates that procedures and standards for impact data collection in Germany are widely missing. Present impact data in Germany are fragmentary, heterogeneous, incomplete and difficult to access. In order to fulfil, for example, the monitoring and reporting requirements of the Sendai Framework for Disaster Risk Reduction 2015-2030 that was adopted in March 2015 in Sendai, Japan, more efforts on impact data collection are needed.}, language = {en} } @phdthesis{Schintgen2016, author = {Schintgen, Tom Vincent}, title = {The geothermal potential of Luxembourg}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87110}, school = {Universit{\"a}t Potsdam}, pages = {XXII, 313}, year = {2016}, abstract = {The aim of this work is the evaluation of the geothermal potential of Luxembourg. The approach consists in a joint interpretation of different types of information necessary for a first rather qualitative assessment of deep geothermal reservoirs in Luxembourg and the adjoining regions in the surrounding countries of Belgium, France and Germany. For the identification of geothermal reservoirs by exploration, geological, thermal, hydrogeological and structural data are necessary. Until recently, however, reliable information about the thermal field and the regional geology, and thus about potential geothermal reservoirs, was lacking. Before a proper evaluation of the geothermal potential can be performed, a comprehensive survey of the geology and an assessment of the thermal field are required. As a first step, the geology and basin structure of the Mesozoic Trier-Luxembourg Basin (TLB) is reviewed and updated using recently published information on the geology and structures as well as borehole data available in Luxembourg and the adjoining regions. A Bouguer map is used to get insight in the depth, morphology and structures in the Variscan basement buried beneath the Trier-Luxembourg Basin. The geological section of the old Cessange borehole is reinterpreted and provides, in combination with the available borehole data, consistent information for the production of isopach maps. The latter visualize the synsedimentary evolution of the Trier-Luxembourg Basin. Complementary, basin-wide cross sections illustrate the evolution and structure of the Trier-Luxembourg Basin. The knowledge gained does not support the old concept of the Weilerbach Mulde. The basin-wide cross sections, as well as the structural and sedimentological observations in the Trier-Luxembourg Basin suggest that the latter probably formed above a zone of weakness related to a buried Rotliegend graben. The inferred graben structure designated by SE-Luxembourg Graben (SELG) is located in direct southwestern continuation of the Wittlicher Rotliegend-Senke. The lack of deep boreholes and subsurface temperature prognosis at depth is circumnavigated by using thermal modelling for inferring the geothermal resource at depth. For this approach, profound structural, geological and petrophysical input data are required. Conceptual geological cross sections encompassing the entire crust are constructed and further simplified and extended to lithospheric scale for their utilization as thermal models. The 2-D steady state and conductive models are parameterized by means of measured petrophysical properties including thermal conductivity, radiogenic heat production and density. A surface heat flow of 75 ∓ 7 (2δ) mW m-2 for verification of the thermal models could be determined in the area. The models are further constrained by the geophysically-estimated depth of the lithosphere-asthenosphere boundary (LAB) defined by the 1300 °C isotherm. A LAB depth of 100 km, as seismically derived for the Ardennes, provides the best fit with the measured surface heat flow. The resulting mantle heat flow amounts to ∼40 mW m-2. Modelled temperatures are in the range of 120-125 °C at 5 km depth and of 600-650 °C at the crust/mantle discontinuity (Moho). Possible thermal consequences of the 10-20 Ma old Eifel plume, which apparently caused upwelling of the asthenospheric mantle to 50-60 km depth, were modelled in a steady-state thermal scenario resulting in a surface heat flow of at least 91 mW m-2 (for the plume top at 60 km) in the Eifel region. Available surface heat-flow values are significantly lower (65-80 mW m-2) and indicate that the plume-related heating has not yet entirely reached the surface. Once conceptual geological models are established and the thermal regime is assessed, the geothermal potential of Luxembourg and the surrounding areas is evaluated by additional consideration of the hydrogeology, the stress field and tectonically active regions. On the one hand, low-enthalpy hydrothermal reservoirs in Mesozoic reservoirs in the Trier-Luxembourg Embayment (TLE) are considered. On the other hand, petrothermal reservoirs in the Lower Devonian basement of the Ardennes and Eifel regions are considered for exploitation by Enhanced/Engineered Geothermal Systems (EGS). Among the Mesozoic aquifers, the Buntsandstein aquifer characterized by temperatures of up to 50 °C is a suitable hydrothermal reservoir that may be exploited by means of heat pumps or provide direct heat for various applications. The most promising area is the zone of the SE-Luxembourg Graben. The aquifer is warmest underneath the upper Alzette River valley and the limestone plateau in Lorraine, where the Buntsandstein aquifer lies below a thick Mesozoic cover. At the base of an inferred Rotliegend graben in the same area, temperatures of up to 75 °C are expected. However, geological and hydraulic conditions are uncertain. In the Lower Devonian basement, thick sandstone-/quartzite-rich formations with temperatures >90 °C are expected at depths >3.5 km and likely offer the possibility of direct heat use. The setting of the S{\"u}deifel (South Eifel) region, including the M{\"u}llerthal region near Echternach, as a tectonically active zone may offer the possibility of deep hydrothermal reservoirs in the fractured Lower Devonian basement. Based on the recent findings about the structure of the Trier-Luxembourg Basin, the new concept presents the M{\"u}llerthal-S{\"u}deifel Depression (MSD) as a Cenozoic structure that remains tectonically active and subsiding, and therefore is relevant for geothermal exploration. Beyond direct use of geothermal heat, the expected modest temperatures at 5 km depth (about 120 °C) and increased permeability by EGS in the quartzite-rich Lochkovian could prospectively enable combined geothermal heat production and power generation in Luxembourg and the western realm of the Eifel region.}, language = {en} } @phdthesis{Nied2016, author = {Nied, Manuela}, title = {The role of soil moisture and weather patterns for flood occurrence and characteristics at the river basin scale}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94612}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 86}, year = {2016}, abstract = {Flood generation at the scale of large river basins is triggered by the interaction of the hydrological pre-conditions and the meteorological event conditions at different spatial and temporal scales. This interaction controls diverse flood generating processes and results in floods varying in magnitude and extent, duration as well as socio-economic consequences. For a process-based understanding of the underlying cause-effect relationships, systematic approaches are required. These approaches have to cover the complete causal flood chain, including the flood triggering meteorological event in combination with the hydrological (pre-)conditions in the catchment, runoff generation, flood routing, possible floodplain inundation and finally flood losses. In this thesis, a comprehensive probabilistic process-based understanding of the causes and effects of floods is advanced. The spatial and temporal dynamics of flood events as well as the geophysical processes involved in the causal flood chain are revealed and the systematic interconnections within the flood chain are deciphered by means of the classification of their associated causes and effects. This is achieved by investigating the role of the hydrological pre-conditions and the meteorological event conditions with respect to flood occurrence, flood processes and flood characteristics as well as their interconnections at the river basin scale. Broadening the knowledge about flood triggers, which up to now has been limited to linking large-scale meteorological conditions to flood occurrence, the influence of large-scale pre-event hydrological conditions on flood initiation is investigated. Using the Elbe River basin as an example, a classification of soil moisture, a key variable of pre-event conditions, is developed and a probabilistic link between patterns of soil moisture and flood occurrence is established. The soil moisture classification is applied to continuously simulated soil moisture data which is generated using the semi-distributed conceptual rainfall-runoff model SWIM. Applying successively a principal component analysis and a cluster analysis, days of similar soil moisture patterns are identified in the period November 1951 to October 2003. The investigation of flood triggers is complemented by including meteorological conditions described by a common weather pattern classification that represents the main modes of atmospheric state variability. The newly developed soil moisture classification thereby provides the basis to study the combined impact of hydrological pre-conditions and large-scale meteorological event conditions on flood occurrence at the river basin scale. A process-based understanding of flood generation and its associated probabilities is attained by classifying observed flood events into process-based flood types such as snowmelt floods or long-rain floods. Subsequently, the flood types are linked to the soil moisture and weather patterns. Further understanding of the processes is gained by modeling of the complete causal flood chain, incorporating a rainfall-runoff model, a 1D/2D hydrodynamic model and a flood loss model. A reshuffling approach based on weather patterns and the month of their occurrence is developed to generate synthetic data fields of meteorological conditions, which drive the model chain, in order to increase the flood sample size. From the large number of simulated flood events, the impact of hydro-meteorological conditions on various flood characteristics is detected through the analysis of conditional cumulative distribution functions and regression trees. The results show the existence of catchment-scale soil moisture patterns, which comprise of large-scale seasonal wetting and drying components as well as of smaller-scale variations related to spatially heterogeneous catchment processes. Soil moisture patterns frequently occurring before the onset of floods are identified. In winter, floods are initiated by catchment-wide high soil moisture, whereas in summer the flood-initiating soil moisture patterns are diverse and the soil moisture conditions are less stable in time. The combined study of both soil moisture and weather patterns shows that the flood favoring hydro-meteorological patterns as well as their interactions vary seasonally. In the analysis period, 18 \% of the weather patterns only result in a flood in the case of preceding soil saturation. The classification of 82 past events into flood types reveals seasonally varying flood processes that can be linked to hydro-meteorological patterns. For instance, the highest flood potential for long-rain floods is associated with a weather pattern that is often detected in the presence of so-called 'Vb' cyclones. Rain-on-snow and snowmelt floods are associated with westerly and north-westerly wind directions. The flood characteristics vary among the flood types and can be reproduced by the applied model chain. In total, 5970 events are simulated. They reproduce the observed event characteristics between September 1957 and August 2002 and provide information on flood losses. A regression tree analysis relates the flood processes of the simulated events to the hydro-meteorological (pre-)event conditions and highlights the fact that flood magnitude is primarily controlled by the meteorological event, whereas flood extent is primarily controlled by the soil moisture conditions. Describing flood occurrence, processes and characteristics as a function of hydro-meteorological patterns, this thesis is part of a paradigm shift towards a process-based understanding of floods. The results highlight that soil moisture patterns as well as weather patterns are not only beneficial to a probabilistic conception of flood initiation but also provide information on the involved flood processes and the resulting flood characteristics.}, language = {en} } @phdthesis{Bande2016, author = {Bande, Alejandro}, title = {The tectonic evolution of the western Tien Shan}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-398933}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 119}, year = {2016}, abstract = {Intracontinental deformation usually is a result of tectonic forces associated with distant plate collisions. In general, the evolution of mountain ranges and basins in this environment is strongly controlled by the distribution and geometries of preexisting structures. Thus, predictive models usually fail in forecasting the deformation evolution in these kinds of settings. Detailed information on each range and basin-fill is vital to comprehend the evolution of intracontinental mountain belts and basins. In this dissertation, I have investigated the complex Cenozoic tectonic evolution of the western Tien Shan in Central Asia, which is one of the most active intracontinental ranges in the world. The work presented here combines a broad array of datasets, including thermo- and geochronology, paleoenvironmental interpretations, sediment provenance and subsurface interpretations in order to track changes in tectonic deformation. Most of the identified changes are connected and can be related to regional-scale processes that governed the evolution of the western Tien Shan. The NW-SE trending Talas-Fergana fault (TFF) separates the western from the central Tien Shan and constitutes a world-class example of the influence of preexisting anisotropies on the subsequent structural development of a contractile orogen. While to the east most of ranges and basins have a sub-parallel E-W trend, the triangular-shaped Fergana basin forms a substantial feature in the western Tien Shan morphology with ranges on all three sides. In this thesis, I present 55 new thermochronologic ages (apatite fission track and zircon (U-Th)/He)) used to constrain exhumation histories of several mountain ranges in the western Tien Shan. At the same time, I analyzed the Fergana basin-fill looking for progressive changes in sedimentary paleoenvironments, source areas and stratal geometrical configurations in the subsurface and outcrops. The data presented in this thesis suggests that low cooling rates (<1°C Myr-1), calm depositional environments, and low depositional rates (<10 m Myr-1) were widely distributed across the western Tien Shan, describing a quiescent tectonic period throughout the Paleogene. Increased cooling rates in the late Cenozoic occurred diachronously and with variable magnitudes in different ranges. This rapid cooling stage is interpreted to represent increased erosion caused by active deformation and constrains the onset of Cenozoic deformation in the western Tien Shan. Time-temperature histories derived from the northwestern Tien Shan samples show an increase in cooling rates by ~25 Ma. This event is correlated with a synchronous pulse iv in the South Tien Shan. I suggest that strike-slip motion along the TFF commenced at the Oligo-Miocene boundary, facilitating CCW rotation of the Fergana basin and enabling exhumation of the linked horsetail splays. Higher depositional rates (~150 m Myr-1) in the Oligo-Miocene section (Massaget Fm.) of the Fergana basin suggest synchronous deformation in the surrounding ranges. The central Alai Range also experienced rapid cooling around this time, suggesting that the onset of intramontane basin fragmentation and isolation is coeval. These results point to deformation starting simultaneously in the late Oligocene - early Miocene in geographically distant mountain ranges. I suggest that these early uplifts are controlled by reactivated structures (like the TFF), which are probably the frictionally weakest and most-suitably oriented for accommodating and transferring N-S horizontal shortening along the western Tien Shan. Afterwards, in the late Miocene (~10 Ma), a period of renewed rapid cooling affected the Tien Shan and most mountain ranges and inherited structures started to actively deform. This episode is widely distributed and an increase in exhumation is interpreted in most of the sampled ranges. Moreover, the Pliocene section in the basin subsurface shows the higher depositional rates (>180 m Myr-1) and higher energy facies. The deformation and exhumation increase further contributed to intramontane basin partitioning. Overall, the interpretation is that the Tien Shan and much of Central Asia suffered a global increase in the rate of horizontal crustal shortening. Previously, stress transfer along the rigid Tarim block or Pamir indentation has been proposed to account for Himalayan hinterland deformation. However, the extent of the episode requires a different and broader geodynamic driver.}, language = {en} } @phdthesis{KonradSchmolke2016, author = {Konrad-Schmolke, Matthias}, title = {Thermodynamic and geochemical modeling in metamorphic geology}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101805}, school = {Universit{\"a}t Potsdam}, pages = {232}, year = {2016}, abstract = {Quantitative thermodynamic and geochemical modeling is today applied in a variety of geological environments from the petrogenesis of igneous rocks to the oceanic realm. Thermodynamic calculations are used, for example, to get better insight into lithosphere dynamics, to constrain melting processes in crust and mantle as well as to study fluid-rock interaction. The development of thermodynamic databases and computer programs to calculate equilibrium phase diagrams have greatly advanced our ability to model geodynamic processes from subduction to orogenesis. However, a well-known problem is that despite its broad application the use and interpretation of thermodynamic models applied to natural rocks is far from straightforward. For example, chemical disequilibrium and/or unknown rock properties, such as fluid activities, complicate the application of equilibrium thermodynamics. One major aspect of the publications presented in this Habilitationsschrift are new approaches to unravel dynamic and chemical histories of rocks that include applications to chemically open system behaviour. This approach is especially important in rocks that are affected by element fractionation due to fractional crystallisation and fluid loss during dehydration reactions. Furthermore, chemically open system behaviour has also to be considered for studying fluid-rock interaction processes and for extracting information from compositionally zoned metamorphic minerals. In this Habilitationsschrift several publications are presented where I incorporate such open system behaviour in the forward models by incrementing the calculations and considering changing reacting rock compositions during metamorphism. I apply thermodynamic forward modelling incorporating the effects of element fractionation in a variety of geodynamic and geochemical applications in order to better understand lithosphere dynamics and mass transfer in solid rocks. In three of the presented publications I combine thermodynamic forward models with trace element calculations in order to enlarge the application of geochemical numerical forward modeling. In these publications a combination of thermodynamic and trace element forward modeling is used to study and quantify processes in metamorphic petrology at spatial scales from µm to km. In the thermodynamic forward models I utilize Gibbs energy minimization to quantify mineralogical changes along a reaction path of a chemically open fluid/rock system. These results are combined with mass balanced trace element calculations to determine the trace element distribution between rock and melt/fluid during the metamorphic evolution. Thus, effects of mineral reactions, fluid-rock interaction and element transport in metamorphic rocks on the trace element and isotopic composition of minerals, rocks and percolating fluids or melts can be predicted. One of the included publications shows that trace element growth zonations in metamorphic garnet porphyroblasts can be used to get crucial information about the reaction path of the investigated sample. In order to interpret the major and trace element distribution and zoning patterns in terms of the reaction history of the samples, we combined thermodynamic forward models with mass-balance rare earth element calculations. Such combined thermodynamic and mass-balance calculations of the rare earth element distribution among the modelled stable phases yielded characteristic zonation patterns in garnet that closely resemble those in the natural samples. We can show in that paper that garnet growth and trace element incorporation occurred in near thermodynamic equilibrium with matrix phases during subduction and that the rare earth element patterns in garnet exhibit distinct enrichment zones that fingerprint the minerals involved in the garnet-forming reactions. In two of the presented publications I illustrate the capacities of combined thermodynamic-geochemical modeling based on examples relevant to mass transfer in subduction zones. The first example focuses on fluid-rock interaction in and around a blueschist-facies shear zone in felsic gneisses, where fluid-induced mineral reactions and their effects on boron (B) concentrations and isotopic compositions in white mica are modeled. In the second example, fluid release from a subducted slab and associated transport of B and variations in B concentrations and isotopic compositions in liberated fluids and residual rocks are modeled. I show that, combined with experimental data on elemental partitioning and isotopic fractionation, thermodynamic forward modeling unfolds enormous capacities that are far from exhausted. In my publications presented in this Habilitationsschrift I compare the modeled results to geochemical data of natural minerals and rocks and demonstrate that the combination of thermodynamic and geochemical models enables quantification of metamorphic processes and insights into element cycling that would have been unattainable so far. Thus, the contributions to the science community presented in this Habilitatonsschrift concern the fields of petrology, geochemistry, geochronology but also ore geology that all use thermodynamic and geochemical models to solve various problems related to geo-materials.}, language = {en} } @phdthesis{Lenz2016, author = {Lenz, Josefine}, title = {Thermokarst dynamics in central-eastern Beringia}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101364}, school = {Universit{\"a}t Potsdam}, pages = {XII, 128, A-47}, year = {2016}, abstract = {Widespread landscape changes are presently observed in the Arctic and are most likely to accelerate in the future, in particular in permafrost regions which are sensitive to climate warming. To assess current and future developments, it is crucial to understand past environmental dynamics in these landscapes. Causes and interactions of environmental variability can hardly be resolved by instrumental records covering modern time scales. However, long-term environmental variability is recorded in paleoenvironmental archives. Lake sediments are important archives that allow reconstruction of local limnogeological processes as well as past environmental changes driven directly or indirectly by climate dynamics. This study aims at reconstructing Late Quaternary permafrost and thermokarst dynamics in central-eastern Beringia, the terrestrial land mass connecting Eurasia and North America during glacial sea-level low stands. In order to investigate development, processes and influence of thermokarst dynamics, several sediment cores from extant lakes and drained lake basins were analyzed to answer the following research questions: 1. When did permafrost degradation and thermokarst lake development take place and what were enhancing and inhibiting environmental factors? 2. What are the dominant processes during thermokarst lake development and how are they reflected in proxy records? 3. How did, and still do, thermokarst dynamics contribute to the inventory and properties of organic matter in sediments and the carbon cycle? Methods applied in this study are based upon a multi-proxy approach combining sedimentological, geochemical, geochronological, and micropaleontological analyses, as well as analyses of stable isotopes and hydrochemistry of pore-water and ice. Modern field observations of water quality and basin morphometrics complete the environmental investigations. The investigated sediment cores reveal permafrost degradation and thermokarst dynamics on different time scales. The analysis of a sediment core from GG basin on the northern Seward Peninsula (Alaska) shows prevalent terrestrial accumulation of yedoma throughout the Early to Mid Wisconsin with intermediate wet conditions at around 44.5 to 41.5 ka BP. This first wetland development was terminated by the accumulation of a 1-meter-thick airfall tephra most likely originating from the South Killeak Maar eruption at 42 ka BP. A depositional hiatus between 22.5 and 0.23 ka BP may indicate thermokarst lake formation in the surrounding of the site which forms a yedoma upland till today. The thermokarst lake forming GG basin initiated 230 ± 30 cal a BP and drained in Spring 2005 AD. Four years after drainage the lake talik was still unfrozen below 268 cm depth. A permafrost core from Mama Rhonda basin on the northern Seward Peninsula preserved a full lacustrine record including several lake phases. The first lake generation developed at 11.8 cal ka BP during the Lateglacial-Early Holocene transition; its old basin (Grandma Rhonda) is still partially preserved at the southern margin of the study basin. Around 9.0 cal ka BP a shallow and more dynamic thermokarst lake developed with actively eroding shorelines and potentially intermediate shallow water or wetland phases (Mama Rhonda). Mama Rhonda lake drainage at 1.1 cal ka BP was followed by gradual accumulation of terrestrial peat and top-down refreezing of the lake talik. A significant lower organic carbon content was measured in Grandma Rhonda deposits (mean TOC of 2.5 wt\%) than in Mama Rhonda deposits (mean TOC of 7.9 wt\%) highlighting the impact of thermokarst dynamics on biogeochemical cycling in different lake generations by thawing and mobilization of organic carbon into the lake system. Proximal and distal sediment cores from Peatball Lake on the Arctic Coastal Plain of Alaska revealed young thermokarst dynamics since about 1,400 years along a depositional gradient based on reconstructions from shoreline expansion rates and absolute dating results. After its initiation as a remnant pond of a previous drained lake basin, a rapidly deepening lake with increasing oxygenation of the water column is evident from laminated sediments, and higher Fe/Ti and Fe/S ratios in the sediment. The sediment record archived characterizing shifts in depositional regimes and sediment sources from upland deposits and re-deposited sediments from drained thaw lake basins depending on the gradually changing shoreline configuration. These changes are evident from alternating organic inputs into the lake system which highlights the potential for thermokarst lakes to recycle old carbon from degrading permafrost deposits of its catchment. The lake sediment record from Herschel Island in the Yukon (Canada) covers the full Holocene period. After its initiation as a thermokarst lake at 11.7 cal ka BP and intense thermokarst activity until 10.0 cal ka BP, the steady sedimentation was interrupted by a depositional hiatus at 1.6 cal ka BP which likely resulted from lake drainage or allochthonous slumping due to collapsing shore lines. The specific setting of the lake on a push moraine composed of marine deposits is reflected in the sedimentary record. Freshening of the maturing lake is indicated by decreasing electrical conductivity in pore-water. Alternation of marine to freshwater ostracods and foraminifera confirms decreasing salinity as well but also reflects episodical re-deposition of allochthonous marine sediments. Based on permafrost and lacustrine sediment records, this thesis shows examples of the Late Quaternary evolution of typical Arctic permafrost landscapes in central-eastern Beringia and the complex interaction of local disturbance processes, regional environmental dynamics and global climate patterns. This study confirms that thermokarst lakes are important agents of organic matter recycling in complex and continuously changing landscapes.}, language = {en} } @phdthesis{Hohenbrink2016, author = {Hohenbrink, Tobias Ludwig}, title = {Turning a problem into a solution: heterogeneities in soil hydrology}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101485}, school = {Universit{\"a}t Potsdam}, pages = {x, 123}, year = {2016}, abstract = {It is commonly recognized that soil moisture exhibits spatial heterogeneities occurring in a wide range of scales. These heterogeneities are caused by different factors ranging from soil structure at the plot scale to land use at the landscape scale. There is an urgent need for effi-cient approaches to deal with soil moisture heterogeneity at large scales, where manage-ment decisions are usually made. The aim of this dissertation was to test innovative ap-proaches for making efficient use of standard soil hydrological data in order to assess seep-age rates and main controls on observed hydrological behavior, including the role of soil het-erogeneities. As a first step, the applicability of a simplified Buckingham-Darcy method to estimate deep seepage fluxes from point information of soil moisture dynamics was assessed. This was done in a numerical experiment considering a broad range of soil textures and textural het-erogeneities. The method performed well for most soil texture classes. However, in pure sand where seepage fluxes were dominated by heterogeneous flow fields it turned out to be not applicable, because it simply neglects the effect of water flow heterogeneity. In this study a need for new efficient approaches to handle heterogeneities in one-dimensional water flux models was identified. As a further step, an approach to turn the problem of soil moisture heterogeneity into a solu-tion was presented: Principal component analysis was applied to make use of the variability among soil moisture time series for analyzing apparently complex soil hydrological systems. It can be used for identifying the main controls on the hydrological behavior, quantifying their relevance, and describing their particular effects by functional averaged time series. The ap-proach was firstly tested with soil moisture time series simulated for different texture classes in homogeneous and heterogeneous model domains. Afterwards, it was applied to 57 mois-ture time series measured in a multifactorial long term field experiment in Northeast Germa-ny. The dimensionality of both data sets was rather low, because more than 85 \% of the total moisture variance could already be explained by the hydrological input signal and by signal transformation with soil depth. The perspective of signal transformation, i.e. analyzing how hydrological input signals (e.g., rainfall, snow melt) propagate through the vadose zone, turned out to be a valuable supplement to the common mass flux considerations. Neither different textures nor spatial heterogeneities affected the general kind of signal transfor-mation showing that complex spatial structures do not necessarily evoke a complex hydro-logical behavior. In case of the field measured data another 3.6\% of the total variance was unambiguously explained by different cropping systems. Additionally, it was shown that dif-ferent soil tillage practices did not affect the soil moisture dynamics at all. The presented approach does not require a priori assumptions about the nature of physical processes, and it is not restricted to specific scales. Thus, it opens various possibilities to in-corporate the key information from monitoring data sets into the modeling exercise and thereby reduce model uncertainties.}, language = {en} } @misc{WehrhanRaunekerSommer2016, author = {Wehrhan, Marc and Rauneker, Philipp and Sommer, Michael}, title = {UAV-Based estimation of carbon exports from heterogeneous soil landscapes}, series = {Sensors}, journal = {Sensors}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407706}, pages = {24}, year = {2016}, abstract = {The advantages of remote sensing using Unmanned Aerial Vehicles (UAVs) are a high spatial resolution of images, temporal flexibility and narrow-band spectral data from different wavelengths domains. This enables the detection of spatio-temporal dynamics of environmental variables, like plant-related carbon dynamics in agricultural landscapes. In this paper, we quantify spatial patterns of fresh phytomass and related carbon (C) export using imagery captured by a 12-band multispectral camera mounted on the fixed wing UAV Carolo P360. The study was performed in 2014 at the experimental area CarboZALF-D in NE Germany. From radiometrically corrected and calibrated images of lucerne (Medicago sativa), the performance of four commonly used vegetation indices (VIs) was tested using band combinations of six near-infrared bands. The highest correlation between ground-based measurements of fresh phytomass of lucerne and VIs was obtained for the Enhanced Vegetation Index (EVI) using near-infrared band b(899). The resulting map was transformed into dry phytomass and finally upscaled to total C export by harvest. The observed spatial variability at field- and plot-scale could be attributed to small-scale soil heterogeneity in part.}, language = {en} } @misc{SchwanghartWorniHuggeletal.2016, author = {Schwanghart, Wolfgang and Worni, Raphael and Huggel, Christian and Stoffel, Markus and Korup, Oliver}, title = {Uncertainty in the Himalayan energy-water nexus}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-97136}, pages = {9}, year = {2016}, abstract = {Himalayan water resources attract a rapidly growing number of hydroelectric power projects (HPP) to satisfy Asia's soaring energy demands. Yet HPP operating or planned in steep, glacier-fed mountain rivers face hazards of glacial lake outburst floods (GLOFs) that can damage hydropower infrastructure, alter water and sediment yields, and compromise livelihoods downstream. Detailed appraisals of such GLOF hazards are limited to case studies, however, and a more comprehensive, systematic analysis remains elusive. To this end we estimate the regional exposure of 257 Himalayan HPP to GLOFs, using a flood-wave propagation model fed by Monte Carlo-derived outburst volumes of >2300 glacial lakes. We interpret the spread of thus modeled peak discharges as a predictive uncertainty that arises mainly from outburst volumes and dam-breach rates that are difficult to assess before dams fail. With 66\% of sampled HPP are on potential GLOF tracks, up to one third of these HPP could experience GLOF discharges well above local design floods, as hydropower development continues to seek higher sites closer to glacial lakes. We compute that this systematic push of HPP into headwaters effectively doubles the uncertainty about GLOF peak discharge in these locations. Peak discharges farther downstream, in contrast, are easier to predict because GLOF waves attenuate rapidly. Considering this systematic pattern of regional GLOF exposure might aid the site selection of future Himalayan HPP. Our method can augment, and help to regularly update, current hazard assessments, given that global warming is likely changing the number and size of Himalayan meltwater lakes.}, language = {en} } @phdthesis{Olen2016, author = {Olen, Stephanie M.}, title = {Understanding Himalayan denudation at the catchment and orogen scale}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-91423}, school = {Universit{\"a}t Potsdam}, pages = {xx, 174}, year = {2016}, abstract = {Understanding the rates and processes of denudation is key to unraveling the dynamic processes that shape active orogens. This includes decoding the roles of tectonic and climate-driven processes in the long-term evolution of high- mountain landscapes in regions with pronounced tectonic activity and steep climatic and surface-process gradients. Well-constrained denudation rates can be used to address a wide range of geologic problems. In steady-state landscapes, denudation rates are argued to be proportional to tectonic or isostatic uplift rates and provide valuable insight into the tectonic regimes underlying surface denudation. The use of denudation rates based on terrestrial cosmogenic nuclide (TCN) such as 10Beryllium has become a widely-used method to quantify catchment-mean denudation rates. Because such measurements are averaged over timescales of 102 to 105 years, they are not as susceptible to stochastic changes as shorter-term denudation rate estimates (e.g., from suspended sediment measurements) and are therefore considered more reliable for a comparison to long-term processes that operate on geologic timescales. However, the impact of various climatic, biotic, and surface processes on 10Be concentrations and the resultant denudation rates remains unclear and is subject to ongoing discussion. In this thesis, I explore the interaction of climate, the biosphere, topography, and geology in forcing and modulating denudation rates on catchment to orogen scales. There are many processes in highly dynamic active orogens that may effect 10Be concentrations in modern river sands and therefore impact 10Be-derived denudation rates. The calculation of denudation rates from 10Be concentrations, however, requires a suite of simplifying assumptions that may not be valid or applicable in many orogens. I investigate how these processes affect 10Be concentrations in the Arun Valley of Eastern Nepal using 34 new 10Be measurements from the main stem Arun River and its tributaries. The Arun Valley is characterized by steep gradients in climate and topography, with elevations ranging from <100 m asl in the foreland basin to >8,000 asl in the high sectors to the north. This is coupled with a five-fold increase in mean annual rainfall across strike of the orogen. Denudation rates from tributary samples increase toward the core of the orogen, from <0.2 to >5 mm/yr from the Lesser to Higher Himalaya. Very high denudation rates (>2 mm/yr), however, are likely the result of 10Be TCN dilution by surface and climatic processes, such as large landsliding and glaciation, and thus may not be representative of long-term denudation rates. Mainstem Arun denudation rates increase downstream from ~0.2 mm/yr at the border with Tibet to 0.91 mm/yr at its outlet into the Sapt Kosi. However, the downstream 10Be concentrations may not be representative of the entire upstream catchment. Instead, I document evidence for downstream fining of grains from the Tibetan Plateau, resulting in an order-of-magnitude apparent decrease in the measured 10Be concentration. In the Arun Valley and across the Himalaya, topography, climate, and vegetation are strongly interrelated. The observed increase in denudation rates at the transition from the Lesser to Higher Himalaya corresponds to abrupt increases in elevation, hillslope gradient, and mean annual rainfall. Thus, across strike (N-S), it is difficult to decipher the potential impacts of climate and vegetation cover on denudation rates. To further evaluate these relationships I instead took advantage of an along-strike west-to-east increase of mean annual rainfall and vegetation density in the Himalaya. An analysis of 136 published 10Be denudation rates from along strike of the revealed that median denudation rates do not vary considerably along strike of the Himalaya, ~1500 km E-W. However, the range of denudation rates generally decreases from west to east, with more variable denudation rates in the northwestern regions of the orogen than in the eastern regions. This denudation rate variability decreases as vegetation density increases (R=- 0.90), and increases proportionately to the annual seasonality of vegetation (R=0.99). Moreover, rainfall and vegetation modulate the relationship between topographic steepness and denudation rates such that in the wet, densely vegetated regions of the Himalaya, topography responds more linearly to changes in denudation rates than in dry, sparsely vegetated regions, where the response of topographic steepness to denudation rates is highly nonlinear. Understanding the relationships between denudation rates, topography, and climate is also critical for interpreting sedimentary archives. However, there is a lack of understanding of how terrestrial organic matter is transported out of orogens and into sedimentary archives. Plant wax lipid biomarkers derived from terrestrial and marine sedimentary records are commonly used as paleo- hydrologic proxy to help elucidate these problems. I address the issue of how to interpret the biomarker record by using the plant wax isotopic composition of modern suspended and riverbank organic matter to identify and quantify organic matter source regions in the Arun Valley. Topographic and geomorphic analysis, provided by the 10Be catchment-mean denudation rates, reveals that a combination of topographic steepness (as a proxy for denudation) and vegetation density is required to capture organic matter sourcing in the Arun River. My studies highlight the importance of a rigorous and careful interpretation of denudation rates in tectonically active orogens that are furthermore characterized by strong climatic and biotic gradients. Unambiguous information about these issues is critical for correctly decoding and interpreting the possible tectonic and climatic forces that drive erosion and denudation, and the manifestation of the erosion products in sedimentary archives.}, language = {en} } @misc{SinghSeitzEickeretal.2016, author = {Singh, Alka and Seitz, Florian and Eicker, Annette and G{\"u}ntner, Andreas}, title = {Water budget analysis within the surrounding of prominent lakes and reservoirs from multi-sensor earth observation data and hydrological models}, series = {remote sensing}, journal = {remote sensing}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407902}, pages = {21}, year = {2016}, abstract = {The hydrological budget of a region is determined based on the horizontal and vertical water fluxes acting in both inward and outward directions. These integrated water fluxes vary, altering the total water storage and consequently the gravitational force of the region. The time-dependent gravitational field can be observed through the Gravity Recovery and Climate Experiment (GRACE) gravimetric satellite mission, provided that the mass variation is above the sensitivity of GRACE. This study evaluates mass changes in prominent reservoir regions through three independent approaches viz. fluxes, storages, and gravity, by combining remote sensing products, in-situ data and hydrological model outputs using WaterGAP Global Hydrological Model (WGHM) and Global Land Data Assimilation System (GLDAS). The results show that the dynamics revealed by the GRACE signal can be better explored by a hybrid method, which combines remote sensing-based reservoir volume estimates with hydrological model outputs, than by exclusive model-based storage estimates. For the given arid/ semi-arid regions, GLDAS based storage estimations perform better than WGHM.}, language = {en} }