@phdthesis{Szklarski2007,
  author    = {Szklarski, Jacek T.},
  title     = {Helical magnetorotational instability in MHD Taylor-Couette flow},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-16002},
  school      = {Universit{\"a}t Potsdam},
  year      = {2007},
  abstract  = {Magnetorotational instability (MRI) is one of the most important and most common instabilities in astrophysics. Today it is widely accepted that it serves as a major source of turbulent viscosity in accretion disks, the most energy efficient objects in the universe. The importance of the MRI for astrophysics has been realized only in recent fifteen years. However, originally it was discovered much earlier, in 1959, in a very different context. Theoretical flow of a conducting liquid confined between differentially rotating cylinders in the presence of an external magnetic field was analyzed. The central conclusion is that the additional magnetic field parallel to the axis of rotation can destabilize otherwise stable flow. Theory of non-magnetized fluid motion between rotating cylinders has much longer history, though. It has been studied already in 1888 and today such setup is usually referred as a Taylor-Couette flow. To prove experimentally the existence of MRI in a magnetized Taylor-Couette flow is a demanding task and different MHD groups around the world try to achieve it. The main problem lies in the fact that laboratory liquid metals which are used in such experiments are characterized by small magnetic Prandtl number. Consequently rotation rates of the cylinders must be extremely large and vast amount of technical problems emerge. One of the most important difficulties is an influence of plates enclosing the cylinders in any experiment. For fast rotation the plates tend to dominate the whole flow and the MRI can not be observed. In this thesis we discuss a special helical configuration of the applied magnetic field which allows the critical rotation rates to be much smaller. If only the axial magnetic field is present, the cylinders must rotate with angular velocities corresponding to Reynolds numbers of order Re ≈ 10^6. With the helical field this number is dramatically reduced to Re ≈ 10^3. The azimuthal component of the magnetic field can be easily generated by letting an electric current through the axis of rotation, In a Taylor-Couette flow the (primary) instability manifests itself as Taylor vortices. The specific geometry of the helical magnetic field leads to a traveling wave solution and the vortices are drifting in a direction determined by rotation and the magnetic field. In an idealized study for infinitely long cylinders this is not a problem. However, if the cylinders have finite length and are bounded vertically by the plates the situation is different. In this dissertation it is shown, with use of numerical methods, that the traveling wave solution also exists for MHD Taylor-Couette flow at finite aspect ratio H/D, H being height of the cylinders, D width of the gap between them. The nonlinear simulations provide amplitudes of fluid velocity which are helpful in designing an experiment. Although the plates disturb the flow, parameters like the drift velocity indicate that the helical MRI operates in this case. The idea of the helical MRI was implemented in a very recent experiment PROMISE. The results provided, for the first time, an evidence that the (helical) MRI indeed exists. Nevertheless, the influence of the vertical endplates was evident and the experiment can be, in principle, improved. Exemplary methods of reduction of the end-effect are here proposed. Near the vertical boundaries develops an Ekman-Hartmann layer. Study of this layer for the MHD Taylor-Couette system as well as its impact on the global flow properties is presented. It is shown that the plates, especially if they are conducting, can disturb the flow far more then previously thought also for relatively slow rotation rates.},
  language  = {en}
}
@phdthesis{Sorce2014,
  author    = {Sorce, Jenny},
  title     = {From Spitzer mid-infrared observations and measurements of peculiar velocities to constrained simulations of the local universe},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72486},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xx, 303},
  year      = {2014},
  abstract  = {Galaxies are observational probes to study the Large Scale Structure. Their gravitational motions are tracers of the total matter density and therefore of the Large Scale Structure. Besides, studies of structure formation and galaxy evolution rely on numerical cosmological simulations. Still, only one universe observable from a given position, in time and space, is available for comparisons with simulations. The related cosmic variance affects our ability to interpret the results. Simulations constrained by observational data are a perfect remedy to this problem. Achieving such simulations requires the projects Cosmic flows and CLUES. Cosmic flows builds catalogs of accurate distance measurements to map deviations from the expansion. These measures are mainly obtained with the galaxy luminosity-rotation rate correlation. We present the calibration of that relation in the mid-infrared with observational data from Spitzer Space Telescope. Resulting accurate distance estimates will be included in the third catalog of the project. In the meantime, two catalogs up to 30 and 150 Mpc/h have been released. We report improvements and applications of the CLUES' method on these two catalogs. The technique is based on the constrained realization algorithm. The cosmic displacement field is computed with the Zel'dovich approximation. This latter is then reversed to relocate reconstructed three-dimensional constraints to their precursors' positions in the initial field. The size of the second catalog (8000 galaxies within 150 Mpc/h) highlighted the importance of minimizing the observational biases. By carrying out tests on mock catalogs, built from cosmological simulations, a method to minimize observational bias can be derived. Finally, for the first time, cosmological simulations are constrained solely by peculiar velocities. The process is successful as resulting simulations resemble the Local Universe. The major attractors and voids are simulated at positions approaching observational positions by a few megaparsecs, thus reaching the limit imposed by the linear theory.},
  language  = {en}
}
@phdthesis{Hutter2014,
  author    = {Hutter, Anne},
  title     = {Unveiling the epoch of reionization by simulations and high-redshift galaxies},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-76998},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vi, 155},
  year      = {2014},
  abstract  = {The Epoch of Reionization marks after recombination the second major change in the ionization state of the universe, going from a neutral to an ionized state. It starts with the appearance of the first stars and galaxies; a fraction of high-energy photons emitted from galaxies permeate into the intergalactic medium (IGM) and gradually ionize the hydrogen, until the IGM is completely ionized at z~6 (Fan et al., 2006). While the progress of reionization is driven by galaxy evolution, it changes the ionization and thermal state of the IGM substantially and affects subsequent structure and galaxy formation by various feedback mechanisms. Understanding this interaction between reionization and galaxy formation is further impeded by a lack of understanding of the high-redshift galactic properties such as the dust distribution and the escape fraction of ionizing photons. Lyman Alpha Emitters (LAEs) represent a sample of high-redshift galaxies that are sensitive to all these galactic properties and the effects of reionization. In this thesis we aim to understand the progress of reionization by performing cosmological simulations, which allows us to investigate the limits of constraining reionization by high-redshift galaxies as LAEs, and examine how galactic properties and the ionization state of the IGM affect the visibility and observed quantities of LAEs and Lyman Break galaxies (LBGs). In the first part of this thesis we focus on performing radiative transfer calculations to simulate reionization. We have developed a mapping-sphere-scheme, which, starting from spherically averaged temperature and density fields, uses our 1D radiative transfer code and computes the effect of each source on the IGM temperature and ionization (HII, HeII, HeIII) profiles, which are subsequently mapped onto a grid. Furthermore we have updated the 3D Monte-Carlo radiative transfer pCRASH, enabling detailed reionization simulations which take individual source characteristics into account. In the second part of this thesis we perform a reionization simulation by post-processing a smoothed-particle hydrodynamical (SPH) simulation (GADGET-2) with 3D radiative transfer (pCRASH), where the ionizing sources are modelled according to the characteristics of the stellar populations in the hydrodynamical simulation. Following the ionization fractions of hydrogen (HI) and helium (HeII, HeIII), and temperature in our simulation, we find that reionization starts at z~11 and ends at z~6, and high density regions near sources are ionized earlier than low density regions far from sources. In the third part of this thesis we couple the cosmological SPH simulation and the radiative transfer simulations with a physically motivated, self-consistent model for LAEs, in order to understand the importance of the ionization state of the IGM, the escape fraction of ionizing photons from galaxies and dust in the interstellar medium (ISM) on the visibility of LAEs. Comparison of our models results with the LAE Lyman Alpha (Lya) and UV luminosity functions at z~6.6 reveals a three-dimensional degeneracy between the ionization state of the IGM, the ionizing photons escape fraction and the ISM dust distribution, which implies that LAEs act not only as tracers of reionization but also of the ionizing photon escape fraction and of the ISM dust distribution. This degeneracy does not even break down when we compare simulated with observed clustering of LAEs at z~6.6. However, our results show that reionization has the largest impact on the amplitude of the LAE angular correlation functions, and its imprints are clearly distinguishable from those of properties on galactic scales. These results show that reionization cannot be constrained tightly by exclusively using LAE observations. Further observational constraints, e.g. tomographies of the redshifted hydrogen 21cm line, are required. In addition we also use our LAE model to probe the question when a galaxy is visible as a LAE or a LBG. Within our model galaxies above a critical stellar mass can produce enough luminosity to be visible as a LBG and/or a LAE. By finding an increasing duty cycle of LBGs with Lya emission as the UV magnitude or stellar mass of the galaxy rises, our model reveals that the brightest (and most massive) LBGs most often show Lya emission. Predicting the Lya equivalent width (Lya EW) distribution and the fraction of LBGs showing Lya emission at z~6.6, we reproduce the observational trend of the Lya EWs with UV magnitude. However, the Lya EWs of the UV brightest LBGs exceed observations and can only be reconciled by accounting for an increased Lya attenuation of massive galaxies, which implies that the observed Lya brightest LAEs do not necessarily coincide with the UV brightest galaxies. We have analysed the dependencies of LAE observables on the properties of the galactic and intergalactic medium and the LAE-LBG connection, and this enhances our understanding of the nature of LAEs.},
  language  = {en}
}
@phdthesis{Codutti2018,
  author    = {Codutti, Agnese},
  title     = {Behavior of magnetic microswimmers},
  doi       = {10.25932/publishup-42297},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-422976},
  school      = {Universit{\"a}t Potsdam},
  pages     = {iv, 142},
  year      = {2018},
  abstract  = {Microswimmers, i.e. swimmers of micron size experiencing low Reynolds numbers, have received a great deal of attention in the last years, since many applications are envisioned in medicine and bioremediation. A promising field is the one of magnetic swimmers, since magnetism is biocom-patible and could be used to direct or actuate the swimmers. This thesis studies two examples of magnetic microswimmers from a physics point of view. The first system to be studied are magnetic cells, which can be magnetic biohybrids (a swimming cell coupled with a magnetic synthetic component) or magnetotactic bacteria (naturally occurring bacteria that produce an intracellular chain of magnetic crystals). A magnetic cell can passively interact with external magnetic fields, which can be used for direction. The aim of the thesis is to understand how magnetic cells couple this magnetic interaction to their swimming strategies, mainly how they combine it with chemotaxis (the ability to sense external gradient of chemical species and to bias their walk on these gradients). In particular, one open question addresses the advantage given by these magnetic interactions for the magnetotactic bacteria in a natural environment, such as porous sediments. In the thesis, a modified Active Brownian Particle model is used to perform simulations and to reproduce experimental data for different systems such as bacteria swimming in the bulk, in a capillary or in confined geometries. I will show that magnetic fields speed up chemotaxis under special conditions, depending on parameters such as their swimming strategy (run-and-tumble or run-and-reverse), aerotactic strategy (axial or polar), and magnetic fields (intensities and orientations), but it can also hinder bacterial chemotaxis depending on the system. The second example of magnetic microswimmer are rigid magnetic propellers such as helices or random-shaped propellers. These propellers are actuated and directed by an external rotating magnetic field. One open question is how shape and magnetic properties influence the propeller behavior; the goal of this research field is to design the best propeller for a given situation. The aim of the thesis is to propose a simulation method to reproduce the behavior of experimentally-realized propellers and to determine their magnetic properties. The hydrodynamic simulations are based on the use of the mobility matrix. As main result, I propose a method to match the experimental data, while showing that not only shape but also the magnetic properties influence the propellers swimming characteristics.},
  language  = {en}
}