@article{TetaliJankowskiLuetzowetal.2016,
  author    = {Tetali, Sarada D. and Jankowski, Vera and Luetzow, Karola and Kratz, Karl and Lendlein, Andreas and Jankowski, Joachim},
  title     = {Adsorption capacity of poly(ether imide) microparticles to uremic toxins},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {61},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-152026},
  pages     = {657 -- 665},
  year      = {2016},
  abstract  = {Uremia is a phenomenon caused by retention of uremic toxins in the plasma due to functional impairment of kidneys in the elimination of urinary waste products. Uremia is presently treated by dialysis techniques like hemofiltration, dialysis or hemodiafiltration. However, these techniques in use are more favorable towards removing hydrophilic than hydrophobic uremic toxins. Hydrophobic uremic toxins, such as hydroxy hipuric acid (OH-HPA), phenylacetic acid (PAA), indoxyl sulfate (IDS) and p-cresylsulfate (pCRS), contribute substantially to the progression of chronic kidney disease (CKD) and cardiovascular disease. Therefore, objective of the present study is to test adsorption capacity of highly porous microparticles prepared from poly(ether imide) (PEI) as an alternative technique for the removal of uremic toxins. Two types of nanoporous, spherically shaped microparticles were prepared from PEI by a spraying/coagulation process. PEI particles were packed into a preparative HPLC column to which a mixture of the four types of uremic toxins was injected and eluted with ethanol. Eluted toxins were quantified by analytical HPLC. PEI particles were able to adsorb all four toxins, with the highest affinity for PAA and pCR. IDS and OH-HPA showed a partially non-reversible binding. In summary, PEI particles are interesting candidates to be explored for future application in CKD.},
  language  = {en}
}
@article{HeuchelGerberKratzetal.2017,
  author    = {Heuchel, Matthias and Gerber, David and Kratz, Karl and Lendlein, Andreas},
  title     = {Morphological analysis of differently sized highly porous poly(ether imide) microparticles by mercury porosimetry},
  series = {Polymers for advanced technologies},
  volume    = {28},
  journal   = {Polymers for advanced technologies},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {1042-7147},
  doi       = {10.1002/pat.3973},
  pages     = {1269 -- 1277},
  year      = {2017},
  abstract  = {Highly porous poly(ether imide) (PEI) microparticles prepared by a spraying/coagulation process are discussed as candidate adsorber materials for apheresis applications, i.e. removal of uremic toxins from the blood of renal failure patients. PEI particles obtained by the aforementioned procedure can have a broad size distribution with particle diameters ranging from 20 to 800 mu m. In order to further estimate the adsorption behavior of PEI microparticles packed in application relevant apheresis modules, a quantitative information about the relation between particle size and pore morphology is required. In this study, we explored whether the intraparticle porosity of PEI microparticles varies with altering the diameter of the particulate adsorbers. By an analytical wet sieving procedure, the obtained PEI microparticles were separated into five size fractions, which were analyzed by mercury intrusion porosimetry, nitrogen adsorption, and scanning electron microscopy. Mercury intrusion porosimetry revealed for all size fractions high porosity values in the range from 78\% to 84\% with pore diameters in the range from 10 to 1000nm. A bimodal pore size distribution was found having a first peak at around 100nm, while a second pronounced peak maximum was found at higher pore sizes that increased with raising particle diameter from 300nm for the smallest particle size fraction (50-100 mu m) to 700nm for particles with a diameter of 200 to 250 mu m. Based on these findings, it can be assumed that the main PEI particle size fraction (200-250 mu m) should exhibit the highest adsorption capacity in an apheresis module. Copyright (c) 2016 John Wiley \& Sons, Ltd.},
  language  = {en}
}
@article{HaaseKrostSauteretal.2017,
  author    = {Haase, Tobias and Krost, Annalena and Sauter, Tilman and Kratz, Karl and Peter, Jan and Kamann, Stefanie and Jung, Friedrich and Lendlein, Andreas and Zohlnh{\"o}fer, Dietlind and R{\"u}der, Constantin},
  title     = {In vivo biocompatibility assessment of poly (ether imide) electrospun scaffolds},
  series = {Journal of Tissue Engineering and Regenerative Medicine},
  volume    = {11},
  journal   = {Journal of Tissue Engineering and Regenerative Medicine},
  number    = {4},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {1932-6254},
  doi       = {10.1002/term.2002},
  pages     = {1034 -- 1044},
  year      = {2017},
  abstract  = {Poly(ether imide) (PEI), which can be chemically functionalized with biologically active ligands, has emerged as a potential biomaterial for medical implants. Electrospun PEI scaffolds have shown advantageous properties, such as enhanced endothelial cell adherence, proliferation and low platelet adhesion in in vitro experiments. In this study, the in vivo behaviour of electrospun PEI scaffolds and PEI films was examined in a murine subcutaneous implantation model. Electrospun PEI scaffolds and films were surgically implanted subcutaneously in the dorsae of mice. The surrounding subcutaneous tissue response was examined via histopathological examination at 7 and 28days after implantation. No serious adverse events were observed for both types of PEI implants. The presence of macrophages or foreign body giant cells in the vicinity of the implants and the formation of a fibrous capsule indicated a normal foreign body reaction towards PEI films and scaffolds. Capsule thickness and inflammatory infiltration cells significantly decreased for PEI scaffolds during days 7-28 while remaining unchanged for PEI films. The infiltration of cells into the implant was observed for PEI scaffolds 7days after implantation and remained stable until 28days of implantation. Additionally some, but not all, PEI scaffold implants induced the formation of functional blood vessels in the vicinity of the implants. Conclusively, this study demonstrates the in vivo biocompatibility of PEI implants, with favourable properties of electrospun PEI scaffolds regarding tissue integration and wound healing.},
  language  = {en}
}