@article{Ziemann2006, author = {Ziemann, Martin Andreas}, title = {In situ micro-Raman spectroscopy on minerals on-site in the Grotto Hall of the New Palace, Park Sanssouci, in Potsdam}, series = {Journal of Raman spectroscopy : JRS}, volume = {37}, journal = {Journal of Raman spectroscopy : JRS}, number = {10}, publisher = {Wiley}, address = {Chichester}, issn = {0377-0486}, doi = {10.1002/jrs.1584}, pages = {1019 -- 1025}, year = {2006}, abstract = {Questions of identity and provenance of minerals that are parts of masterpieces in museums have become increasingly important in mineralogical and historical studies. Detailed investigations of valuable and unique objects require on-site, nondestructive and noninvasive methods because touching or removing them may cause irreparable damage. A mobile Raman-microprobe has been used to meet these demands for truly in situ mineralogical studies of the large collection of minerals and rocks of the Prussian kings in the Grotto Hall (Grottensaal) of the New Palace (Neues Palais), Park Sanssouci in Potsdam. Minerals on the walls of the Grotto Hall were analyzed to identify them and thereby to complete the data bank of the collection. Fluid and solid inclusions in the interior of a large quartz crystal have been studied to provide evidence of the provenance of the crystal. The fluid inclusions contain aqueous saline solutions, whereas the solid inclusions are needles of anhydrite with a length of about 1.5 mm. The quartz probably originated from an area in the eastern Alps, from the surroundings of Bad Gastein, Austria. This is the first on-site and in situ study of inclusions below the surface of a mineral with a mobile Raman-microprobe outside a laboratory.}, language = {en} } @inproceedings{ZeilingerMuttiStreckeretal.2006, author = {Zeilinger, Gerold and Mutti, Maria and Strecker, Manfred and Rehak, Katrin and Bookhagen, Bodo and Schwab, Marco}, title = {Integration of digital elevation models and satellite images to investigate geological processes.}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7063}, year = {2006}, abstract = {In order to better understand the geological boundary conditions for ongoing or past surface processes geologists face two important questions: 1) How can we gain additional knowledge about geological processes by analyzing digital elevation models (DEM) and satellite images and 2) Do these efforts present a viable approach for more efficient research. Here, we will present case studies at a variety of scales and levels of resolution to illustrate how we can substantially complement and enhance classical geological approaches with remote sensing techniques. Commonly, satellite and DEM based studies are being used in a first step of assessing areas of geologic interest. While in the past the analysis of satellite imagery (e.g. Landsat TM) and aerial photographs was carried out to characterize the regional geologic characteristics, particularly structure and lithology, geologists have increasingly ventured into a process-oriented approach. This entails assessing structures and geomorphic features with a concept that includes active tectonics or tectonic activity on time scales relevant to humans. In addition, these efforts involve analyzing and quantifying the processes acting at the surface by integrating different remote sensing and topographic data (e.g. SRTM-DEM, SSM/I, GPS, Landsat 7 ETM, Aster, Ikonos…). A combined structural and geomorphic study in the hyperarid Atacama desert demonstrates the use of satellite and digital elevation data for assessing geological structures formed by long-term (millions of years) feedback mechanisms between erosion and crustal bending (Zeilinger et al., 2005). The medium-term change of landscapes during hundred thousands to millions years in a more humid setting is shown in an example from southern Chile. Based on an analysis of rivers/watersheds combined with landscapes parameterization by using digital elevation models, the geomorphic evolution and change in drainage pattern in the coastal Cordillera can be quantified and put into the context of seismotectonic segmentation of a tectonically active region. This has far-reaching implications for earthquake rupture scenarios and hazard mitigation (K. Rehak, see poster on IMAF Workshop). Two examples illustrate short-term processes on decadal, centennial and millennial time scales: One study uses orogen scale precipitation gradients derived from remotely sensed passive microwave data (Bookhagen et al., 2005a). They demonstrate how debris flows were triggered as a response of slopes to abnormally strong rainfall in the interior parts of the Himalaya during intensified monsoons. The area of the orogen that receives high amounts of precipitation during intensified monsoons also constitutes numerous landslide deposits of up to 1km3 volume that were generated during intensified monsoon phase at about 27 and 9 ka (Bookhagen et al., 2005b). Another project in the Swiss Alps compared sets of aerial photographs recorded in different years. By calculating high resolution surfaces the mass transport in a landslide could be reconstructed (M. Schwab, Universit{\"a}t Bern). All these examples, although representing only a short and limited selection of projects using remote sense data in geology, have as a common approach the goal to quantify geological processes. With increasing data resolution and new sensors future projects will even enable us to recognize more patterns and / or structures indicative of geological processes in tectonically active areas. This is crucial for the analysis of natural hazards like earthquakes, tsunamis and landslides, as well as those hazards that are related to climatic variability. The integration of remotely sensed data at different spatial and temporal scales with field observations becomes increasingly important. Many of presently highly populated places and increasingly utilized regions are subject to significant environmental pressure and often constitute areas of concentrated economic value. Combined remote sensing and ground-truthing in these regions is particularly important as geologic, seismicity and hydrologic data may be limited here due to the recency of infrastructural development. Monitoring ongoing processes and evaluating the remotely sensed data in terms of recurrence of events will greatly enhance our ability to assess and mitigate natural hazards.
Dokument 1: Foliensatz | Dokument 2: Abstract
Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @article{WolbernJacobBlakeetal.2006, author = {Wolbern, I and Jacob, A. W. B. and Blake, T. A. and Kind, Rainer and Li, X and Yuan, X. H and Duennebier, F and Weber, Michael H.}, title = {Deep origin of the Hawaiian tilted plume conduit derived from receiver functions}, doi = {10.1111/j.1365-246X.2006.03036.x}, year = {2006}, abstract = {We employ P to S converted waveforms to investigate effects of the hot mantle plume on seismic discontinuities of the crust and upper mantle. We observe the Moho at depths between 13 and 17 km, regionally covered by a strong shallow intracrustal converted phase. Coherent phases on the transverse component indicate either dipping interfaces, 3- D heterogeneities or lower crustal anisotropy. We find anomalies related to discontinuities in the upper mantle down to the transition zone evidently related to the hot mantle plume. Lithospheric thinning is confirmed in greater detail than previously reported by Li et al., and we determine the dimensions of the low-velocity zone within the asthenosphere with greater accuracy. Our study mainly focuses on the temperature-pressure dependent discontinuities of the upper mantle transition zone. Effects of the hot diapir on the depths of mineral phase transitions are verified at both major interfaces at 410 and 660 km. We determine a plume radius of about 200 km at the 660 km discontinuity with a core zone of about 120 km radius. The plume conduit is located southwest of Big Island. A conduit tilted in the northeast direction is required in the upper mantle to explain the observations. The determined positions of deflections of the discontinuities support the hypothesis of decoupled upper and lower mantle convection}, language = {en} } @article{WilkeSchmidtFargesetal.2006, author = {Wilke, Max and Schmidt, Christian and Farges, Francois and Malavergne, Valerie and Gautron, Laurent and Simionovici, Alexandre and Hahn, Matthias and Petit, Pierre-Emanuel}, title = {Structural environment of iron in hydrous aluminosilicate glass and melt-evidence from X-ray absorption spectroscopy}, doi = {10.1016/j.chemgeo.2006.01.017}, year = {2006}, abstract = {The iron speciation in hydrous haplotonalitic and haplogranitic silicate glasses was studied using XAFS spectroscopy and transmission electron microscopy (TEM). Spectral features occurring at the main crest of the XANES at the iron K-edge of hydrous glasses indicate contributions to the spectra by iron-moieties present in a more ordered structural environment than found in the dry glass. These differences are also suggested by analysis of the EXAFS. These effects are not completely suppressed even for those samples that were quenched with a higher cooling rate. Strongest differences to the dry glass are observed for a sample that was quenched slowly through the temperature of glass transformation. Crystals (60 to 1500 nm in size) of magnetite, maghemite and another unidentified phase were observed in this sample by TEM, whereas no crystals were found in samples quenched with regular or high cooling rates. In-situ XANES measurements up to 700 degrees C and 500 MPa were performed to reveal the origin (i.e., during synthesis or quench) of the structural differences for those hydrous glasses that do not display any detectable crystallization. The comparison of XANES spectra collected on Fe2+ in water-saturated haplogranitic melt at 700 degrees C and 500 MPa and on Fe2+ in dry melt at 1150 degrees C shows that the local structural environment of Fe2+ in both systems is similar. This indicates that there is no detectable and direct influence of water on the local structure around iron in this type of melt. Hence, the differences observed between hydrous and dry glasses can only be related to artefacts formed during the quench process. (c) 2006 Elsevier B.V. All rights reserved}, language = {en} } @phdthesis{Wilke2006, author = {Wilke, Max}, title = {Untersuchungen zur Eisenspeziation in Mineralphasen unter besonderer Ber{\"u}cksichtigung der R{\"o}ntgenabsorptionsspektroskopie (XAFS)}, address = {Potsdam}, pages = {47 S. : graph. Darst.}, year = {2006}, language = {de} } @article{WawrzenitzRomerOberhaenslietal.2006, author = {Wawrzenitz, Nicole and Romer, Rolf L. and Oberh{\"a}nsli, Roland and Dong, Shuwen}, title = {Dating of subduction and differential exhumation of UHP rocks from the Central Dabie Complex (E-China) : constraints from microfabrics, Rb-Sr and U-Pb isotope systems}, doi = {10.1016/j.lithos.2005.12.001}, year = {2006}, abstract = {The correlation of deformation fabrics and metamorphic reactions with geochronologic data of UHP metamorphic rocks demonstrate that the multistage subduction and exhumation history of the Central Dabie Complex requires rapid subduction and rapid initial exhumation. Moreover, these data show that volume diffusion is not the major resetting mechanism of radiogenic isotope systems. Thus, our age data do not simply reflect a thermal/cooling history. In the investigated section, the maximum age for UHP is given by the 244 +/- 3 Ma (2 sigma) U-Pb age of a pre-UHP titanite phenocryst that survived UHP metamorphism and subsequent tectonometamorphic events. A minimum age for UHP is set by the 238 +/- 1 Ma (2 sigma) U-238-Pb-206 mineral isochron age of titanite and cogenetic epidote. These minerals formed from local partial melts during ascent and their age suggests fast exhumation and emplacement in the middle crust. In the period of ca. 238-218 Ma, the UHP terrain records HT metamorphism, local partial melting, and extensive pervasive strain below the eclogite (jd+grt) stability field. Exhumation was polyphase with a first phase of fast exhumation, succeeded by episodes of HT metamorphism and concomitant deformation at deep/mid crustal level between 238 and 218 Ma. Slow exhumation related to the final emplacement of tectonic units along greenschist facies shear zones did not cease before ca. 209-204 Ma. The resetting and homogenization of radiogenic isotope systems were aided by dissolution precipitation creep, which was the dominant deformation mechanism in quartz-feldspar rocks, in combination with fluid influx. (c) 2005 Elsevier B.V. All rights reserved}, language = {en} } @article{TronickeVillamorGreen2006, author = {Tronicke, Jens and Villamor, P and Green, Alan G.}, title = {Detailed shallow geometry and vertical displacement estimates of the Maleme Fault Zone, New Zealand, using 2D and 3D georadar}, year = {2006}, abstract = {In an attempt to map the shallow geometry of the Maleme Fault Zone (North Island, New Zealand) and estimate vertical displacements of selected fault strands, we have collected 2D and 3D georadar data using 100 MHz antennae. The 2D data consisted of three parallel georadar lines recorded perpendicular to the axis of the well-defined graben of the Maleme Fault Zone. These similar to 160 in long lines, which were 7.5 m apart, crossed several fault strands on either side of the graben axis. The processed georadar sections revealed two prominent parallel reflections that originated from the boundaries of Late Pleistocene lacustrine and tephra deposits. Distinct vertical offsets of these reflections allowed us to estimate displacernents at individual fault strands across the entire inner graben. The total displacements represented by these offsets was similar to 10-20\% greater than that inferred from geomorphological studies, thus demonstrating the limitations of surface observations for determining cumulative fault movements. The 3D georadar data set, recorded across an area of similar to 70x similar to 20 in to one side of the graben axis, provided key details on individual fault strands. For the 3D visualization of fault-related structures, various spatial attribute analyses based on the cosine of the instantaneous phase proved to be useful}, language = {en} } @inproceedings{Tronicke2006, author = {Tronicke, Jens}, title = {Patterns in geophysical data and models}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7096}, year = {2006}, abstract = {Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @book{Tronicke2006, author = {Tronicke, Jens}, title = {Hydrogeophysik : Erkundungen und Sicherung der Ressource Wasser : Antrittsvorlesung 2006-06-01}, publisher = {Univ.-Bibl.}, address = {Potsdam}, year = {2006}, abstract = {Die weltweite Wasserversorgung basiert zu einem {\"u}berwiegenden Teil auf Grundwasser. Die Erkundung, der Schutz, die nachhaltige Nutzung sowie die eventuelle Sanierung dieser Grundwasserressourcen sind somit global von fundamentalem gesellschaftlichem Interesse. Bei vielen dieser grundwasserbezogenen Fragestellungen ist h{\"a}ufig eine effiziente und detaillierte Charakterisierung des Untergrundes notwendig. Geophysikalische Messverfahren liefern Abbilder der physikalischen Eigenschaften, wie beispielsweise des elektrischen Widerstandes, die wichtige Informationen {\"u}ber den geometrischen und stofflichen Aufbau des verborgenen Untergrundes liefern. In der Vorlesung wird gezeigt, wie die Verfahren der Angewandten Geophysik auf Fragestellungen hinsichtlich der Pr{\"a}senz, Ausbreitung und Qualit{\"a}t der Ressource Grundwasser eingesetzt werden k{\"o}nnen. Dar{\"u}ber hinaus werden aktuelle Forschungsthemen und offene Fragen angesprochen.}, language = {de} } @book{Trauth2006, author = {Trauth, Martin H.}, title = {Matlab in geosciences : recipes for data analysis}, series = {MATLAB® Recipes for Earth Sciences}, journal = {MATLAB® Recipes for Earth Sciences}, publisher = {Springer-Verlag Berlin Heidelberg}, address = {Berlin, Heidelberg}, isbn = {3-540-27983-0}, doi = {10.1007/3-540-27984-9}, pages = {237 S.}, year = {2006}, abstract = {MATLAB is used in a wide range of applications in geosciences, such as image processing in remote sensing, generation and processing of digital elevation models and the analysis of time series. This book introduces basic methods of data analysis in geosciences using MATLAB. The text includes a brief description of each method and numerous examples demonstrating how MATLAB can be used on data sets from earth sciences. All MATLAB recipes can be easily modified in order to analyse the reader's own data sets. The book comes with a CD containing exemplary data sets and a digital version of the MATLAB recipes. (Springer)}, language = {en} } @book{Trauth2006, author = {Trauth, Martin H.}, title = {MATLAB recipes for earth sciences : with CD-ROM}, publisher = {Springer}, address = {Heidelberg}, isbn = {3-540-27983-0}, pages = {238 S.}, year = {2006}, abstract = {MATLAB is used in a wide range of applications in geosciences, such as image processing in remote sensing, generation and processing of digital elevation models and the analysis of time series. This book introduces basic methods of data analysis in geosciences using MATLAB. The text includes a brief description of each method and numerous examples on how MATLAB can be used on data sets from earth sciences. All MATLAB recipes can easily be modified in order to analyse the reader's own data sets. The book comes with a CD containing example data sets and a digital version of the MATLAB recipes.}, language = {en} } @article{TorjekWituckaWallMeyeretal.2006, author = {Torjek, Otto and Witucka-Wall, Hanna and Meyer, Rhonda C. and von Korff, Maria and Kusterer, Barbara and Rautengarten, Carsten and Altmann, Thomas}, title = {Segregation distortion in Arabidopsis C24/Col-0 and Col-0/C24 recombinant inbred line populations is due to reduced fertility caused by epistatic interaction of two loci}, series = {Theoretical and applied genetics}, volume = {113}, journal = {Theoretical and applied genetics}, publisher = {Springer}, address = {Berlin}, issn = {0040-5752}, doi = {10.1007/s00122-006-0402-3}, pages = {1551 -- 1561}, year = {2006}, abstract = {A new large set of reciprocal recombinant inbred lines (RILs) was created between the Arabidopsis accessions Col-0 and C24 for quantitative trait mapping approaches, consisting of 209 Col-0 x C24 and 214 C24 x Col-0 F-7 RI lines. Genotyping was performed using 110 evenly distributed framework single nucleotide polymorphism markers, yielding a genetic map of 425.70 cM, with an average interval of 3.87 cM. Segregation distortion (SD) was observed in several genomic regions during the construction of the genetic map. Linkage disequilibrium analysis revealed an association between a distorted region at the bottom of chromosome V and a non-distorted region on chromosome IV. A detailed analysis of the RILs for these two regions showed that an SD occurred when homozygous Col-0 alleles on chromosome IV coincided with homozygous C24 alleles at the bottom of chromosome V. Using nearly isogenic lines segregating for the distorted region we confirmed that this genotypic composition leads to reduced fertility and fitness.}, language = {en} } @article{ThomasWebsterRhedeetal.2006, author = {Thomas, Rainer and Webster, J. D. and Rhede, Dieter and Seifert, W. and Rickers, Karen and F{\"o}rster, Hans-J{\"u}rgen and Heinrich, Wilhelm and Davidson, P.}, title = {The transition from peraluminous to peralkaline granitic melts: Evidence from melt inclusions and accessory minerals}, series = {Lithos : an international journal of mineralogy, petrology, and geochemistry}, volume = {91}, journal = {Lithos : an international journal of mineralogy, petrology, and geochemistry}, number = {1-4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0024-4937}, doi = {10.1016/j.lithos.2006.03.013}, pages = {137 -- 149}, year = {2006}, abstract = {Fractional crystallization of peraluminous F- and H(2)O-rich granite magmas progressively enriches the remaining melt with volatiles. We show that, at saturation, the melt may separate into two immiscible conjugate melt fractions, one of the fractions shows increasing peraluminosity and the other increasing peralkalinity. These melt fractions also fractionate the incompatible elements to significantly different degrees. Coexisting melt fractions have differing chemical and physical properties and, due to their high density and viscosity contrasts, they will tend to separate readily from each other. Once separated, each melt fraction evolves independently in response to changing T/P/X conditions and further immiscibility events may occur, each generating its own conjugate pair of melt fractions. The strongly peralkaline melt fractions in particular are very reactive and commonly react until equilibrium is attained. Consequently, the peralkaline melt fraction is commonly preserved only in the isolated melt and mineral inclusions. We demonstrate that the differences between melt fractions that can be seen most clearly in differing melt inclusion compositions are also visible in the composition of the resulting ore-forming and accessory minerals, and are visible on scales from a few micrometers to hundreds of meters.}, language = {en} } @article{ThiedeArrowsmithBookhagenetal.2006, author = {Thiede, Rasmus Christoph and Arrowsmith, J. Ram{\´o}n and Bookhagen, Bodo and McWilliams, Michael O. and Sobel, Edward and Strecker, Manfred}, title = {Dome formation and extension in the Tethyan Himalaya, Leo Pargil, northwest India}, doi = {10.1130/B25872.1}, year = {2006}, abstract = {Metamorphic dome complexes occur within the internal structures of the northern Himalaya and southern Tibet. Their origin, deformation, and fault displacement patterns are poorly constrained. We report new field mapping, structural data, and cooling ages from the western flank of the Leo Pargil dome in the northwestern Himalaya in an attempt to characterize its post-middle Miocene structural development. The western flank of the dome is characterized by shallow, west-dipping pervasive foliation and WNW-ESE mineral lineation. Shear-sense indicators demonstrate that it is affected by east-west normal faulting that facilitated exhumation of high-grade metamorphic rocks in a contractional setting. Sustained top-to-northwest normal faulting during exhumation is observed in a progressive transition from ductile to brittle deformation. Garnet and kyanite indicate that the Leo Pargil dome was exhumed from the mid-crust. Ar- 40/Ar-39 mica and apatite fission track (AFT) ages constrain cooling and exhumation pathways front 350 to 60 degrees C and suggest that the dome cooled in three stages since the middle Miocene. Ar-40/Ar-39 white mica ages of 16-14 Ma suggest a first phase of rapid cooling and provide minimum estimates for the onset of dome exhumation. AFT ages between 10 and 8 Ma suggest that ductile fault displacement had ceased by then, and AFT track-length data from high-elevation samples indicate that the rate of cooling had decreased significantly. We interpret this to indicate decreased fault displacement along the Leo Pargil shear zone and possibly a transition to the Kaurik-Chango normal fault system between 10 and 6 Ma. AFT ages from lower elevations indicate accelerated cooling since the Pliocene that cannot be related to pure fault displacement, and therefore may reflect more pronounced regionally distributed and erosion-driven exhumation}, language = {en} } @article{SuryantoIgelWassermannetal.2006, author = {Suryanto, Wiwit and Igel, Heiner and Wassermann, Joachim and Cochard, Alain and Schuberth, B. S. A. and Vollmer, Daniel and Scherbaum, Frank and Schreiber, U. and Velikoseltsev, A.}, title = {First comparison of array-derived rotational ground motions with direct ring laser measurements}, series = {Bulletin of the Seismological Society of America}, volume = {96}, journal = {Bulletin of the Seismological Society of America}, number = {6}, publisher = {GeoScienceWorld}, address = {Alexandria, Va.}, issn = {0037-1106}, doi = {10.1785/0120060004}, pages = {2059 -- 2071}, year = {2006}, abstract = {Recently, ring laser technology has provided the first consistent observations of rotational ground motions around a vertical axis induced by earthquakes. "Consistent," in this context, implies that the observed waveforms and amplitudes are compatible with collocated recordings of translational ground motions. In particular, transverse accelerations should be in phase with rotation rate and their ratio proportional to local horizontal phase velocity assuming plane-wave propagation. The ring laser installed at the Fundamental station Wettzell in the Bavarian Forest, Southeast Germany, is recording the rotation rate around a vertical axis, theoretically a linear combination of the space derivatives of the horizontal components of motion. This suggests that, in principle, rotation can be derived from seismic-array experiments by "finite differencing." This has been attempted previously in several studies; however, the accuracy of these observations could never be tested in the absence of direct measurements. We installed a double cross-shaped array of nine stations from December 2003 to March 2004 around the ring laser instrument and observed several large earthquakes on both the ring laser and the seismic array. Here we present for the first time a comparison of array-derived rotations with direct measurements of rotations for ground motions induced by the M 6.3 Al Hoceima, Morocco, earthquake of 24 February 2004. With complete 3D synthetic seismograms calculated for this event we show that even low levels of noise may considerably influence the accuracy of the array-derived rotations when the minimum number of required stations (three) is used. Nevertheless, when using all nine stations, the overall fit between direct and array-derived measurements is surprisingly good (maximum correlation coefficient of 0.94).}, language = {en} } @phdthesis{Sorrel2006, author = {Sorrel, Philippe}, title = {The Aral Sea : a palaeoclimate archive}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7807}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {The intracontinental endorheic Aral Sea, remote from oceanic influences, represents an excellent sedimentary archive in Central Asia that can be used for high-resolution palaeoclimate studies. We performed palynological, microfacies and geochemical analyses on sediment cores retrieved from Chernyshov Bay, in the NW part of the modern Large Aral Sea. The most complete sedimentary sequence, whose total length is 11 m, covers approximately the past 2000 years of the late Holocene. High-resolution palynological analyses, conducted on both dinoflagellate cysts assemblages and pollen grains, evidenced prominent environmental change in the Aral Sea and in the catchment area. The diversity and the distribution of dinoflagellate cysts within the assemblages characterized the sequence of salinity and lake-level changes during the past 2000 years. Due to the strong dependence of the Aral Sea hydrology to inputs from its tributaries, the lake levels are ultimately linked to fluctuations in meltwater discharges during spring. As the amplitude of glacial meltwater inputs is largely controlled by temperature variations in the Tien Shan and Pamir Mountains during the melting season, salinity and lake-level changes of the Aral Sea reflect temperature fluctuations in the high catchment area during the past 2000 years. Dinoflagellate cyst assemblages document lake lowstands and hypersaline conditions during ca. 0-425 AD, 920-1230 AD, 1500 AD, 1600-1650 AD, 1800 AD and since the 1960s, whereas oligosaline conditions and higher lake levels prevailed during the intervening periods. Besides, reworked dinoflagellate cysts from Palaeogene and Neogene deposits happened to be a valuable proxy for extreme sheet-wash events, when precipitation is enhanced over the Aral Sea Basin as during 1230-1450 AD. We propose that the recorded environmental changes are related primarily to climate, but may have been possibly amplified during extreme conditions by human-controlled irrigation activities or military conflicts. Additionally, salinity levels and variations in solar activity show striking similarities over the past millennium, as during 1000-1300 AD, 1450-1550 and 1600-1700 AD when low lake levels match well with an increase in solar activity thus suggesting that an increase in the net radiative forcing reinforced past Aral Sea's regressions. On the other hand, we used pollen analyses to quantify changes in moisture conditions in the Aral Sea Basin. High-resolution reconstruction of precipitation (mean annual) and temperature (mean annual, coldest versus warmest month) parameters are performed using the "probability mutual climatic spheres" method, providing the sequence of climate change for the past 2000 years in western Central Asia. Cold and arid conditions prevailed during ca. 0-400 AD, 900-1150 AD and 1500-1650 AD with the extension of xeric vegetation dominated by steppe elements. Conversely, warmer and less arid conditions occurred during ca. 400-900 AD and 1150-1450 AD, where steppe vegetation was enriched in plants requiring moister conditions. Change in the precipitation pattern over the Aral Sea Basin is shown to be predominantly controlled by the Eastern Mediterranean (EM) cyclonic system, which provides humidity to the Middle East and western Central Asia during winter and early spring. As the EM is significantly regulated by pressure modulations of the North Atlantic Oscillation (NAO) when the system is in a negative phase, a relationship between humidity over western Central Asia and the NAO is proposed. Besides, laminated sediments record shifts in sedimentary processes during the late Holocene that reflect pronounced changes in taphonomic dynamics. In Central Asia, the frequency of dust storms occurring during spring when the continent is heating up is mostly controlled by the intensity and the position of the Siberian High (SH) Pressure System. Using titanium (Ti) content in laminated sediments as a proxy for aeolian detrital inputs, changes in wind dynamics over Central Asia is documented for the past 1500 years, offering the longest reconstruction of SH variability to date. Based on high Ti content, stronger wind dynamics are reported from 450-700 AD, 1210-1265 AD, 1350-1750 AD and 1800-1975 AD, reporting a stronger SH during spring. In contrast, lower Ti content from 1750-1800 AD and 1980-1985 AD reflect a diminished influence of the SH and a reduced atmospheric circulation. During 1180-1210 AD and 1265-1310 AD, considerably weakened atmospheric circulation is evidenced. As a whole, though climate dynamics controlled environmental changes and ultimately modulated changes in the western Central Asia's climate system, it is likely that changes in solar activity also had an impact by influencing to some extent the Aral Sea's hydrology balance and also regional temperature patterns in the past.
The appendix of the thesis is provided via the HTML document as ZIP download.}, subject = {Aralsee}, language = {en} } @article{SobelOskinBurbanketal.2006, author = {Sobel, Edward and Oskin, Michael and Burbank, Douglas W. and Mikolaichuk, Alexander}, title = {Exhumation of basement-cored uplifts : Example of the Kyrgyz Range quantified with apatite fission track thermochronology}, doi = {10.1029/2005TC001809}, year = {2006}, abstract = {[1] The Kyrgyz Range, the northernmost portion of the Kyrgyzstan Tien Shan, displays topographic evidence for lateral propagation of surface uplift and exhumation. The highest, most deeply dissected segment lies in the center of the range. To the east, topography and relief decrease, and preserved remnants of a Cretaceous regional erosion surface imply minimal amounts of bedrock exhumation. The timing of exhumation of range segments defines the lateral propagation rate of the range-bounding reverse fault and quantifies the time and erosion depth needed to transform a mountain range from a juvenile to a mature morphology. New multicompositional apatite fission track ( AFT) data from three transects from the eastern Kyrgyz Range, combined with published AFT data, demonstrate that the range has propagated over 110 km eastward over the last similar to 7 - 11 Myr. On the basis of the thermal and topographic evolutionary history, we present a model for a time-varying exhumation rate driven by rock uplift and changes in erodability and the timescale of geomorphic adjustment to surface uplift. Easily eroded, Cenozoic sedimentary rocks overlying resistant basement control early, rapid exhumation and exhibit slow surface uplift rates. As increasing amounts of resistant basement are exposed, exhumation rates decrease while surface uplift rates are sustained or increase, thereby growing topography. As the range becomes high enough to cause ice accumulation and to develop steep river valleys, fluvial and glacial erosion becomes more powerful, and exhumation rates once again increase. Independently determined range-normal shortening rates also varied over time, suggesting a feedback between erosional efficiency and shortening rate}, language = {en} } @article{SobelChenHeermance2006, author = {Sobel, Edward and Chen, Jie and Heermance, Richard V.}, title = {Late Oligocene-Early Miocene initiation of shortening in the Southwestern Chinese Tian Shan : implications for Neogene shortening rate variations}, doi = {10.1016/j.epsl.2006.03.048}, year = {2006}, abstract = {The Cenozoic Tian Shan is one of the preeminent examples of an intracontinental orogen. However, there remains a significant controversy over when deformation related to the India-Asia collision commenced and therefore how shortening within the mountains has been partitioned over time. One approach has been to look at the modem shortening rate as measured by geodetic studies, combined with estimates of the total shortening across the range and extrapolate backwards. This approach suggests that the onset of range construction was ca. 10 Ma [K.Y. Abdrakhmatov, S.A. Aldazhanov, B.H. Hager, M.W Hamburger, T.A. Herring, K.B. Kalabaev, K.B. Kalabayev, V.I. Makarov, P. Molnar, S.V Panasyuk, M.T. Prilepin, R.E. Reilinger, I.S. Sadybakasov, B.J. Souter, Y.A. Trapeznikov, V.Y. Tsurkov, A.V. Zubovich, Relatively recent construction of the Tien Shan inferred from GPS measurements of present-day crustal deformation rates, Nature 384 (6608) (1996) 450-453]. An alternate method is to determine the age of the onset of exhumation using thermochronology. We present 19 new apatite fission-track (AFT) results from the southwestern Chinese portion of the belt; this region represents the first area exhumed during the late Tertiary along a transect at ca. 76 degrees E. Exhumation commenced at the Oligocene-Miocene boundary (similar to 24 Ma) along the Maidan and Muziduke thrusts, which bound the southern side of the Kokshaal range. Subsequently, deformation propagated ca. 20 km south to the Kashi basin- bounding thrust (KBT), which was exhumed by no earlier than 18.9 +/- 3.3 Ma. Three detrital AFT samples from Plio- Pleistocene strata deposited ca. 20 km farther south contain fission track grain age peaks that young monotonically upwards from 20.9 + 7.0/- 5.3 Ma to 15.9 + 5.4/- 4.0 Ma with a fairly constant lag time of 16 to 18 Ma. These ages, combined with structural data, suggest that both the hanging wall and the footwall of the KBT experienced a renewed episode of exhumation during the latest Cenozoic. The discrepancy between the Late Oligocene-Miocene initiation of significant exhumation shown herein and the 10 Ma initiation estimate from geodesy suggests that the Tian Shan has undergone a complex Late Cenozoic shortening history. Assuming that the present shortening rate could account for the total amount of Cenozoic shortening in 10 Ma and realizing that shortening initiated at least 15 Myr earlier, we conclude that the shortening rate must have varied over time, possibly in pulsed-southward migrating events, and that the present rate may not reflect the average rate since initiation of range uplift. (c) 2006 Elsevier B.V. All rights reserved}, language = {en} } @article{SchmidTorjekMeyeretal.2006, author = {Schmid, Karl J. and Torjek, Otto and Meyer, Rhonda C. and Schmuths, Heike and Hoffmann, Matthias H. and Altmann, Thomas}, title = {Evidence for a large-scale population structure of Arabidopsis thaliana from genome-wide single nucleotide polymorphism markers}, doi = {10.1007/s00122-006-0212-7}, year = {2006}, abstract = {Population-based methods for the genetic mapping of adaptive traits and the analysis of natural selection require that the population structure and demographic history of a species are taken into account. We characterized geographic patterns of genetic variation in the model plant Arabidopsis thaliana by genotyping 115 genome-wide single nucleotide polymorphism (SNP) markers in 351 accessions from the whole species range using a matrix-assisted laser desorption/ionization time-of-flight assay, and by sequencing of nine unlinked short genomic regions in a subset of 64 accessions. The observed frequency distribution of SNPs is not consistent with a constant-size neutral model of sequence polymorphism due to an excess of rare polymorphisms. There is evidence for a significant population structure as indicated by differences in genetic diversity between geographic regions. Accessions from Central Asia have a low level of polymorphism and an increased level of genome-wide linkage disequilibrium (LD) relative to accessions from the Iberian Peninsula and Central Europe. Cluster analysis with the structure program grouped Eurasian accessions into K=6 clusters. Accessions from the Iberian Peninsula and from Central Asia constitute distinct populations, whereas Central and Eastern European accessions represent admixed populations in which genomes were reshuffled by historical recombination events. These patterns likely result from a rapid postglacial recolonization of Eurasia from glacial refugial populations. Our analyses suggest that mapping populations for association or LD mapping should be chosen from regional rather than a species-wide sample or identified genetically as sets of individuals with similar average genetic distances}, language = {en} } @article{ScherbaumCottonStaedtke2006, author = {Scherbaum, Frank and Cotton, Fabrice Pierre and Staedtke, Helmut}, title = {The estimation of minimum-misfit stochastic models from empirical ground-motion prediction equations}, doi = {10.1785/0120050015}, year = {2006}, abstract = {In areas of moderate to low seismic activity there is commonly a lack of recorded strong ground motion. As a consequence, the prediction of ground motion expected for hypothetical future earthquakes is often performed by employing empirical models from other regions. In this context, Campbell's hybrid empirical approach (Campbell, 2003, 2004) provides a methodological framework to adapt ground-motion prediction equations to arbitrary target regions by using response spectral host-to-target-region-conversion filters. For this purpose, the empirical ground-motion prediction equation has to be quantified in terms of a stochastic model. The problem we address here is how to do this in a systematic way and how to assess the corresponding uncertainties. For the determination of the model parameters we use a genetic algorithm search. The stochastic model spectra were calculated by using a speed-optimized version of SMSIM (Boore, 2000). For most of the empirical ground-motion models, we obtain sets of stochastic models that match the empirical models within the full magnitude and distance ranges of their generating data sets fairly well. The overall quality of fit and the resulting model parameter sets strongly depend on the particular choice of the distance metric used for the stochastic model. We suggest the use of the hypocentral distance metric for the stochastic Simulation of strong ground motion because it provides the lowest-misfit stochastic models for most empirical equations. This is in agreement with the results of two recent studies of hypocenter locations in finite-source models which indicate that hypocenters are often located close to regions of large slip (Mai et al., 2005; Manighetti et al., 2005). Because essentially all empirical ground-motion prediction equations contain data from different geographical regions, the model parameters corresponding to the lowest-misfit stochastic models cannot necessarily be expected to represent single, physically realizable host regions but to model the generating data sets in an average way. In addition, the differences between the lowest-misfit stochastic models and the empirical ground-motion prediction equation are strongly distance, magnitude, and frequency dependent, which, according to the laws of uncertainty propagation, will increase the variance of the corresponding hybrid empirical model predictions (Scherbaum et al., 2005). As a consequence, the selection of empirical ground-motion models for host-to-target-region conversions requires considerable judgment of the ground-motion analyst}, language = {en} } @article{RoesslerKruegerRuempkeretal.2006, author = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and R{\"u}mpker, Georg and Psencik, Ivan}, title = {Tensile source components of swarm events in West Bohemia in 2000 by considering seismic anisotropy}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12975}, year = {2006}, abstract = {Earthquake swarms occur frequently in West Bohemia, Central Europe. Their occurrence is correlated with and propably triggered by fluids that escape on the earth's surface near the epicentres. These fluids raise up periodically from a seemingbly deep-seated source in the upper mantle. Moment tensors for swarm events in 1997 indicate tensile faulting. However, they were determined under assumption of seismic isotropy although anisotropy can be observed. Anisotropy may obscure moment tensors and their interpretation. In 2000, more than 10,000 swarm earthquakes occurred near Novy Kostel, West Bohemia. Event triggering by fluid injection is likely. Activity lasted from 28/08 until 31/12/00 (9 phases) with maximum ML=3.2. High quality P-wave seismograms were used to retrieve the source mechanisms for 112 events between 28/08/00 and 30/10/00 using > 20 stations. We determine the source geometry using a new algorithm and different velocity models including anisotropy. From inversions of P waves we observe ML<3.2, strike-slip events on steep N-S oriented faults with additional normal or reverse components. Tensile components seem to be evident for more than 60\% of the processed swarm events in West Bohemia during the phases 1-7. Being most significant at great depths and at phases 1-4 during the swarm they are time and location dependent. Although tensile components are reduced when anisotropy is assumed they persist and seem to be important. They can be explained by pore-pressure changes due to the injection of fluids that raise up. Our findings agree with other observations e.g. correlation of fluid transport and seismicity, variations in b-value, forcing rate, and in pore pressure diffusion. Tests of our results show their significance.}, language = {en} } @phdthesis{Roessler2006, author = {R{\"o}ßler, Dirk}, title = {Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7758}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60\% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting.}, subject = {Seismologie}, language = {en} } @inproceedings{RiedelZiemannOberhaensli2006, author = {Riedel, Michael R. and Ziemann, Martin Andreas and Oberh{\"a}nsli, Roland}, title = {Pattern dynamics applied to the kinetics of mineral phase transformations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7316}, year = {2006}, abstract = {Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @inproceedings{RehakStreckerEchtler2006, author = {Rehak, Katrin and Strecker, Manfred and Echtler, Helmut Peter}, title = {DEM supported tectonic geomorphology : the Coastal Cordillera of the South-Central Chilean active margin ; [Poster]}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7224}, year = {2006}, abstract = {Fluvial systems are one of the major features shaping a landscape. They adjust to the prevailing tectonic and climatic setting and therefore are very sensitive markers of changes in these systems. If their response to tectonic and climatic forcing is quantified and if the climatic signal is excluded, it is possible to derive a local deformation history. Here, we investigate fluvial terraces and erosional surfaces in the southern Chilean forearc to assess a long-term geomorphic and hence tectonic evolution. Remote sensing and field studies of the Nahuelbuta Range show that the long-term deformation of the Chilean forearc is manifested by breaks in topography, sequences of differentially uplifted marine, alluvial and strath terraces as well as tectonically modified river courses and drainage basins. We used SRTM-90-data as basic elevation information for extracting and delineating drainage networks. We calculated hypsometric curves as an indicator for basin uplift, stream-length gradient indices to identify stream segments with anomalous slopes, and longitudinal river profiles as well as DS-plots to identify knickpoints and other anomalies. In addition, we investigated topography with elevation-slope graphs, profiles, and DEMs to reveal erosional surfaces. During the first field trip we already measured palaeoflow directions, performed pebble counting and sampled the fluvial terraces in order to apply cosmogenic nuclide dating (10Be, 26Al) as well as provenance analyses. Our preliminary analysis of the Coastal Cordillera indicates a clear segmentation between the northern and southern parts of the Nahuelbuta Range. The Lanalhue Fault, a NW-SE striking fault zone oblique to the plate boundary, defines the segment boundary. Furthermore, we find a complex drainage re-organisation including a drainage reversal and wind gap on the divide between the Tir{\´u}a and Pellahu{\´e}n basins east of the town Tir{\´u}a. The coastal basins lost most of their Andean sediment supply areas that existed in Tertiary and in part during early Pleistocene time. Between the B{\´i}o-B{\´i}o and Imperial rivers no Andean river is recently capable to traverse the Coastal Cordillera, suggesting ongoing Quaternary uplift of the entire range. From the spatial distribution of geomorphic surfaces in this region two uplift signals may be derived: (1) a long-term differential uplift process, active since the Miocene and possibly caused by underplating of subducted trench sediments, (2) a younger, local uplift affecting only the northern part of the Nahuelbuta Range that may be caused by the interaction of the forearc with the subduction of the Mocha Fracture Zone at the latitude of the Arauco peninsula. Our approach thus provides results in our attempt to decipher the characteristics of forearc development of active convergent margins using long-term geomorphic indicators. Furthermore, it is expected that our ongoing assessment will constrain repeatedly active zones of deformation.
Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @phdthesis{Popp2006, author = {Popp, Steffen}, title = {Late Quaternary Environment of Central Yakuutia (NE{\"i} Siberia): Signals in Frozen Ground and Terrestrial Sediments}, address = {Potsdam}, pages = {85 S. : graph. Darst.}, year = {2006}, language = {en} } @article{PedersenBrunetonMaupin2006, author = {Pedersen, Helle A. and Bruneton, Marianne and Maupin, Val{\´e}rie}, title = {Lithospheric and sublithospheric anisotropy beneath the Baltic shield from surface-wave array analysis}, doi = {10.1016/j.epsl.2006.02.009}, year = {2006}, abstract = {We report measurements of radial and azimuthal anisotropy in the tipper mantle beneath southern and central Finland, which we obtained by array analysis of fundamental-mode Rayleigh and Love waves. Azimuthally averaged phase velocities were analysed in the period range 15 to 190 s for Rayleigh waves and 15 to 100 s for Love waves. The azimuthal variation of the Rayleigh wave phase velocities was obtained in the period range 20 to 100s. The limited depth resolution of fundamental-mode surface waves necessitated strong damping constraints in the inversion for anisotropic parameters. We investigated the effects of non-unicity on the final model by experimenting with varying model geometries. The radial anisotropy beneath Finland can be explained by a lithosphere at least 200km thick, predominantly (> 50\% by volume) composed of olivine crystals having their a-axes randomly distributed in the horizontal plane. On the contrary, the measured lithospheric azimuthal anisotropy is small. This call be reconciled with body-wave observations made in the area that indicate a complex pattern of rapidly varying anisotropy. Below 200-250km depth, that is below the petrologic lithosphere as revealed by xenolith analyses conducted in the area, the magnitude of the azimuthal anisotropy increases and would be compatible with a mantle containing 15-20\% by volume of olivine crystals whose a-axes are coherently aligned in the N-NE direction. The alignment of the a-axes is off the direction of present-day absolute plate motion in either the no-net-rotation or hot-spot reference frame, currently N55-N60. We interpret this mismatch as evidence for a complex convective flow pattern of the mantle beneath the shield, which, by inference, is decoupled from the overlying lithosphere.}, language = {en} } @article{PanetChambodutDiamentetal.2006, author = {Panet, I. and Chambodut, Aude and Diament, M. and Holschneider, Matthias and Jamet, O.}, title = {New insights on intraplate volcanism in French Polynesia from wavelet analysis of GRACE, CHAMP, and sea surface data}, series = {Journal of geophysical research : Solid earth}, volume = {111}, journal = {Journal of geophysical research : Solid earth}, publisher = {Union}, address = {Washington}, issn = {0148-0227}, doi = {10.1029/2005JB004141}, pages = {17}, year = {2006}, abstract = {[ 1] In this paper, we discuss the origin of superswell volcanism on the basis of representation and analysis of recent gravity and magnetic satellite data with wavelets in spherical geometry. We computed a refined gravity field in the south central Pacific based on the GRACE satellite GGM02S global gravity field and the KMS02 altimetric grid, and a magnetic anomaly field based on CHAMP data. The magnetic anomalies are marked by the magnetic lineation of the seafloor spreading and by a strong anomaly in the Tuamotu region, which we interpret as evidence for crustal thickening. We interpret our gravity field through a continuous wavelet analysis that allows to get a first idea of the internal density distribution. We also compute the continuous wavelet analysis of the bathymetric contribution to discriminate between deep and superficial sources. According to the gravity signature of the different chains as revealed by our analysis, various processes are at the origin of the volcanism in French Polynesia. As evidence, we show a large-scale anomaly over the Society Islands that we interpret as the gravity signature of a deeply anchored mantle plume. The gravity signature of the Cook-Austral chain indicates a complex origin which may involve deep processes. Finally, we discuss the particular location of the Marquesas chain as suggesting that the origin of the volcanism may interfere with secondary convection rolls or may be controlled by lithospheric weakness due to the regional stress field, or else related to the presence of the nearby Tuamotu plateau.}, language = {en} } @article{PaascheTronickeHolligeretal.2006, author = {Paasche, Hendrik and Tronicke, Jens and Holliger, Klaus and Green, Alan G. and Maurer, Hansruedi}, title = {Integration of diverse physical-property models : subsurface zonation and petrophysical parameter estimation based on fuzzy c-means cluster analyses}, doi = {10.1190/1.2192927}, year = {2006}, abstract = {Inversions of an individual geophysical data set can be highly nonunique, and it is generally difficult to determine petrophysical parameters from geophysical data. We show that both issues can be addressed by adopting a statistical multiparameter approach that requires the acquisition, processing, and separate inversion of two or more types of geophysical data. To combine information contained in the physical-property models that result from inverting the individual data sets and to estimate the spatial distribution of petrophysical parameters in regions where they are known at only a few locations. we demonstrate the potential of the fuzzy c-means (FCM) clustering technique. After testing this new approach on synthetic data, we apply it to limited crosshole georadar, crosshole seismic, gamma-log, and slug-test data acquired within a shallow alluvial aquifer. The derived multiparameter model effectively outlines the major sedimentary units observed in numerous boreholes and provides plausible estimates for the spatial distributions of gamma-ray emitters and hydraulic conductivity}, language = {en} } @inproceedings{OhrnbergerWassermannRichter2006, author = {Ohrnberger, Matthias and Wassermann, Joachim and Richter, Gudrun}, title = {Automatic detection and classification of seismic signals for monitoring purposes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7294}, year = {2006}, abstract = {Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @article{O'Brien2006, author = {O'Brien, Patrick J.}, title = {The age of deep, steep continental subduction in the NW Himalaya : relating zircon growth to metamorphic history. Comment on: "The onset of India-Asia continental collision: Early, steep subduction required by the timing of UHP metamorphism in the western Himalaya" by Mary L. Leech, S. Singh, A.K. Jain, Simon L. Klemperer and R.M. Manickavasagam, Earth and Planetary Science Letters 234 (2005) 83-97}, doi = {10.1016/j.epsl.2006.03.033}, year = {2006}, abstract = {Leech et al. [Mary L. Leech, S. Singh, A.K. Jain, Simon L. Klemperer and R.M. Manickavasagam, Earth and Planetary Science Letters 234 (2005) 83-97], present 3 clusters of ages for growth stages in zircon from quartzo- feldspathic gneisses hosting coesite-bearing eclogite from the Tso Morari Complex, NW India. These age clusters, from oldest to youngest, are interpreted to represent the age of ultrahigh-pressure metamorphism, a subsequent eclogite facies overprint and a later amphibolite facies retrogression and require subduction of Indian crust to have started earlier than previously accepted. However, no petrographic evidence, such as inclusions in the zircons relating to particular metamorphic events, is presented to substantiate the proposed sequence of metamorphic stages. Previously published data from eclogites of the same area indicate that coesite-eclogite is not the first but at least the second eclogite facies stage. In addition, the newly proposed time interval between coesite-eclogite and the amphibolite facies overprint is longer than previously indicated by diffusion modelling of natural garnet-garnet couples in eclogite. Neither the age of ultrahigh-pressure metamorphism nor the timing of initiation of subduction is reliably constrained by the presented data}, language = {en} } @article{O'Brien2006, author = {O'Brien, Patrick J.}, title = {Type-locality granulites: high-pressure rocks formed at eclogite-facies conditions}, doi = {10.1007/s00710-005-0108-2}, year = {2006}, abstract = {The type-locality granulites from the Granulitgebirge of Saxony, Germany, are rocks of broadly granitic composition containing minor garnet and kyanite within a commonly mylonitised matrix of feldspars and quartz. Petrographic evidence indicates a primary assemblage of ternary feldspar + quartz + garnet + kyanite + rutile, most likely resulting from partial melting of a granitic protolith, for which equilibrium temperature and pressure conditions of > 1000 degrees C and > 1.5 GPa have been deduced. These extreme (for crustal rocks) conditions, and the inferred peak assemblage, are supported by the newly-developed Zr-in-rutile geothermometer and experimental studies on the same bulk composition, respectively. As these conditions lie above those required for plagioclase stability in quartz tholeiites, they are thus in the eclogite facies. Widespread modification of the peak assemblage, for example mesoperthite formation after ternary feldspar, deformation-induced recrystallisation of perthites to two-feldspar + quartz aggregates, biotite replacing garnet, Ca-loss at garnet rims, sillimanite replacing kyanite or secondary garnet growth, makes reliable interpretation of equilibrium assemblages and compositions very difficult and explains the spread of published pressure- temperature values and consequent confusion about formation depths and the validity of tectonometamorphic models. Such extreme metamorphic conditions in rock compositions typical for the upper continental crust, reflecting a hot subduction environment, has important consequences for understanding some collisional orogens}, language = {en} } @article{NasdalaWildnerWirthetal.2006, author = {Nasdala, Lutz and Wildner, Manfred and Wirth, Richard and Groschopf, Nora and Pal, Dipak C. and M{\"o}ller, Andreas}, title = {Alpha particle haloes in chlorite and cordierite}, year = {2006}, abstract = {Effects of the impact of natural long-term irradiation with alpha particles in one chamosite and one cordierite sample were characterised in detail using electron microprobe, Raman microprobe, optical absorption spectroscopy (cordierite only), and transmission electron microscopy (TEM; cordierite only) analysis. In both cases, the impact of He- 4 cores (alpha particles) that were emitted from actinide-bearing mineral inclusions has caused the formation of radiation damage haloes in the host mineral. These haloes have maximum radii of about 33 mu m (chamosite) and 47 mu m (cordierite). They show notably changed optical properties, i.e., intensified absorption of light as recognised by brown (chamosite) and yellow (cordierite) pleochroism and enhanced or even anomalous interference colours. In spite of the significant disturbance of their short range order, alpha particle haloes are characterised by generally low degrees of structural radiation damage. This is indicated by rather moderate broadening of vibrational bands and, in the case of cordierite, apparently undisturbed electron diffraction patterns in the TEM. Intensive damage, virtually close to an amorphous state, was only found in cordierite up to a few tens of nanometres away from actinide-bearing inclusions. This damage is mainly assigned to recoils of heavy nuclei upon emission of an alpha particle, which have particle trajectory lengths that are three orders of magnitude shorter than those of the alpha particles. Similar to observations on biotite, alpha particle haloes in chamosite and cordierite as observed in the optical microscope may be considered as representative of a very early stage of the metamictisation process}, language = {en} } @article{NabelekLabotkaHelmsetal.2006, author = {Nabelek, Peter I. and Labotka, Theodore C. and Helms, Thomas S. and Wilke, Max}, title = {Fluid-mediated polymetamorphism related to proterozoic collision of Archean Wyoming and Superior Provinces in the Black Hills, South Dakota}, year = {2006}, language = {en} } @article{MoraParraStreckeretal.2006, author = {Mora, Andr{\´e}s and Parra, Mauricio and Strecker, Manfred and Kammer, Andreas and Dimate, Cristina and Rodriguez, Fernando}, title = {Cenozoic contractional reactivation of Mesozoic extensional structures in the Eastern Cordillera of Colombia}, doi = {10.1029/2005tc001854}, year = {2006}, abstract = {[ 1] The Eastern Cordillera of Colombia is key to understanding the role of inherited basement anisotropies in the evolution of active noncollisional mountain belts. In particular, the Rio Blanco-Guatiquia region of the Eastern Cordillera is exemplary in displaying a variety of phenomena that document the importance of the orientation, geometry, and segmentation of preorogenic anisotropies. We document the first unambiguous evidence that extensional basement structures played an important role in determining the locus of deformation during contractional reactivation in the Eastern Cordillera. Detailed structural field mapping and analysis of industry seismic reflection profiles have helped to identify the inherited San Juanito, Naranjal, and Servita normal faults and associated transfer faults as important structures that were inverted during the Cenozoic Andean orogeny. Apparently, the more internal faults in the former rift basin were not properly oriented for an efficient reactivation in contraction. However, these faults have a fundamental role as strain risers, as folding is concentrated west of them. In contrast, reactivated normal faults such as the more external Servita fault are responsible for uplifting the eastern flank of the Eastern Cordillera. In addition, these structures are adjacent and intimately linked to the development of thin-skinned faults farther east. In part, the superimposed compression in this prestrained extensional region is compensated by lateral escape. The dominant presence of basement involved buckling and thrusting, and the restricted development of thin-skinned thrusting in this inversion orogen makes the Eastern Cordillera a close analog to the intraplate Atlas Mountains of Morocco and other inverted sectors of the Andean orogen farther south}, language = {en} } @article{MohsenKindSobolevetal.2006, author = {Mohsen, Ayman and Kind, Rainer and Sobolev, Stephan Vladimir and Weber, Michael}, title = {Thickness of the lithosphere east of the Dead Sea Transform}, series = {Geophysical journal international}, volume = {167}, journal = {Geophysical journal international}, number = {2}, publisher = {Blackwell}, address = {Oxford}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2006.03185.x}, pages = {845 -- 852}, year = {2006}, abstract = {We use the S receiver function method to study the lithosphere at the Dead Sea Transform (DST). A temporary network of 22 seismic broad-band stations was operated on both sides of the DST from 2000 to 2001 as part of the DESERT project. We also used data from six additional permanent broad-band seismic stations at the DST and in the surrounding area, that is, in Turkey, Saudi Arabia, Egypt and Cyprus. Clear S-to-P converted phases from the crust-mantle boundary (Moho) and a deeper discontinuity, which we interpret as lithosphere-asthenosphere boundary (LAB) have been observed. The Moho depth (30-38 km) obtained from S receiver functions agrees well with the results from P receiver functions and other geophysical data. We observe thinning of the lithosphere on the eastern side of the DST from 80 km in the north of the Dead Sea to about 65 km at the Gulf of Aqaba. On the western side of the DST, the few data indicate a thin LAB of about 65 km. For comparison, we found a 90-km-thick lithosphere in eastern Turkey and a 160-km-thick lithosphere under the Arabian shield, respectively. These observations support previous suggestions, based on xenolith data, heat flow observations, regional uplift history and geodynamic modelling, that the lithosphere around DST has been significantly thinned in the Late Cenozoic, likely following rifting and spreading of the Red Sea.}, language = {en} } @phdthesis{Merz2006, author = {Merz, Bruno}, title = {Absch{\"a}tzung von Hochwasserrisiken Methoden, Grenzen und M{\"o}glichkeiten}, address = {Potsdam}, pages = {x, 351 S. : graph. Darst.}, year = {2006}, language = {de} } @article{MelnickCharletEchtleretal.2006, author = {Melnick, Daniel and Charlet, Francois and Echtler, Helmut P. and De Batist, Marc}, title = {Incipient axial collapse of the Main Cordillera and strain partitioning gradient between the central and Patagonian Andes, Lago Laja, Chile}, series = {Tectonics}, volume = {25}, journal = {Tectonics}, number = {5}, publisher = {Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1029/2005TC001918}, pages = {22}, year = {2006}, abstract = {Lago Laja is a late Quaternary volcanic-dammed lake located near the drainage divide of the south central Andes. Field observations, lake reflection seismic profiles, bathymetry, and remote sensing data reveal an active fault system that runs parallel to the volcanic arc along the axis of the Main Cordillera, the Lago Laja fault system (LLFS). Normal faults of this extensional system cut late Pleistocene volcanics, <7.1 ka still water lacustrine sediments, 6.3 ka pyroclastic deposits, and Holocene alluvial fans. We divide the LLFS in three segments on the basis of fault geometry, width, and slip magnitude. The underwater faults of the central segment in the lake's deepest part have the maximum Holocene vertical slip rate of >2.7 mm/yr. Since 7.1 ka, the LLFS accounts for ∼0.7\% of arc-normal extension at an average minimum rate of 1.2 mm/yr and strain rate of ∼10-14 s-1. Seismites and surface ruptures evidence M>6 paleoearthquakes. The Main Cordillera at ∼37°S is a large-scale pop-up structure uplifted by thrusting along its foothills. In this light, we interpret extension in the axial and highest part of the Andes as incipient synorogenic gravitational collapse in response to uplift and crustal thickening. Thermal weakening due to elevated heat flow and postglacial lithospheric rebound and unbending have probably contributed to the arc-limited collapse and Holocene acceleration of deformation rates. The lack of significant strike-slip offsets along the LLFS as well as along both foothills-thrust systems at 37°S contrasts with the intra-arc dextral fault zone south of 38°S. Regional structural data indicates that north of 38°S, diffusely distributed strain reflects low partitioning of oblique subduction, while to the south deformation is localized in a discrete strike-slip fault zone along the volcanic arc, reflecting a higher degree of partitioning. We relate this strain partitioning gradient to favorable fault orientations in the fore arc north of the Arauco Peninsula, a major seismotectonic boundary.}, language = {en} } @misc{Mangili2006, author = {Mangili, Clara}, title = {Microfacies and isotope analyses of the varved Pi{\`a}nico lake sediment profile for high-resolution reconstruction of interglacial climate dynamics}, address = {Potsdam}, pages = {VI, 91 Bl. : graph. Darst.}, year = {2006}, language = {en} } @inproceedings{Lueck2006, author = {L{\"u}ck, Erika}, title = {Geophysik f{\"u}r den oberfl{\"a}chennahen Bereich (Landwirtschaft, Bodenkunde, Arch{\"a}ologie, Umwelt usw.)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7045}, year = {2006}, abstract = {Dokument 1: Foliensatz | Dokument 2: Animation
Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {de} } @article{KuesterHetzelKrbetscheketal.2006, author = {K{\"u}ster, Yvonne and Hetzel, Ralf and Krbetschek, Matthias and Tao, Mingxin}, title = {Holocene loess sedimentation along the Qilian Shan (China) : significance for understanding the processes and timing of loess deposition}, issn = {0277-3791}, doi = {10.1016/j.quascirev.2005.03.003}, year = {2006}, abstract = {We present optical ages for well preserved loess deposits along the Qilian Shan, a 500-km-long mountain belt forming the tectonically active northeastern margin of the Tibetan Plateau. Loess on tectonically controlled fill terraces along the Shiyou and Baiyong rivers was dated by applying the single-aliquot regeneration (SAR) technique to coarse-grained (90-160 mu m) quartz samples. Additional measurements on polymineralic fine-grained (5-10 mu m) samples were carried out to allow a comparison between various optical dating techniques currently in use. The results demonstrate that (i) loess accumulation started between 13 and 11 ka B.P., continuing to the present, (ii) mean loess accumulation rates range between similar to 9 and similar to 16 cm ka(-1), and (iii) Holocene loess is not restricted to certain sites only, but is a prevalent phenomenon along the Qilian Shan mountain front. The absence of loess deposits of Late Pleistocene age is a result of a combination of cold and dry climate conditions, strong winds, and the absence of a vegetation cover during the last glacial period. Only with the change to a warmer and moister climate at the onset of the Holocene did a plant cover develop, which acted as a dust trap, thus initiating the formation of loess.}, language = {en} } @article{KroenerWildeZhaoetal.2006, author = {Kr{\"o}ner, Alfred and Wilde, Simon A. and Zhao, Guochun and O'Brien, Patrick J. and Sun, Min and Liu, Dun Yi and Wan, Yusheng and Liu, S. W. and Guo, Jianbin H.}, title = {Zircon geochronology and metamorphic evolution of mafic dykes in the Hengshan Complex of northern China: Evidence for late Palaeoproterozoic extension and subsequent high-pressure metamorphism in the North China Craton}, issn = {0301-9268}, doi = {10.1016/j.precamres.2006.01.008}, year = {2006}, abstract = {Magmatic and metamorphic zircons have been dated from ductilely deformed gabbroic dykes defining a dyke swarm and signifying crustal extension in the northern part of the Hengshan Complex of the North China Craton, These dykes now occur as boudins and deformed sheets within migmatitic tonalitic, trondhjemitic, granodioritic and granitic gneisses and are conspicuous due to relics of high-pressure granulite or even former eclogite facies garnet + pyroxene-bearing assemblages. SHRIMP ages for magmatic zircons from two dykes reflect the time of dyke emplacement at similar to 1915 Ma, whereas metamorphic zircons dated by both SHRIMP and evaporation techniques are consistently in the range 1848-1888 Ma. The Youngest granitoid gneiss yet dated in the Hengshan has an emplacement age of 18 2 17 Ma. These results complement recent geochronological studies from the neighbouring Wutai and Fuping Complexes, to the SE of the Hengshan, showing that a crustal extension event Occurred in the late Palaeoproterozoic. This preceded a major high-pressure collision- type metamorphic event in the central part of the North China Craton that occurred in the Palaeoproterozoic and not in the late Archaean as previously thought. Our data support recent suggestions that the North China Craton experienced a major, craton-wide orogenic event in the late Palaeoproterozoic after which it became cratonized and acted as a stable block.}, language = {en} } @article{KrolJaegerBronstertetal.2006, author = {Krol, Maarten and Jaeger, Annekathrin and Bronstert, Axel and G{\"u}ntner, Andreas}, title = {Integrated modelling of climate, water, soil, agricultural and socio-economic processes: A general introduction of the methodology and some exemplary results from the semi-arid north-east of Brazil}, series = {Journal of hydrology}, volume = {328}, journal = {Journal of hydrology}, number = {3-4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0022-1694}, doi = {10.1016/j.jhydrol.2005.12.021}, pages = {417 -- 431}, year = {2006}, abstract = {Many semi-arid regions are characterised by water scarcity and vulnerability of natural resources, pronounced climatic variability and social stress. Integrated studies including climatotogy, hydrology, and socio-econornic studies are required both for analysing the dynamic natural conditions and to assess possible strategies to make semi-arid regions Less vulnerable to the present and changing climate. The model introduced here dynamically describes the retationships between climate forcing, water availability, agriculture and selected societal processes. The model has been tailored to simulate the rather complex situation in the semi-and north-eastern Brazil in a quantitative manner including the sensitivity to external forcing, such as climate change. The selected results presented show the general functioning of the integrated model, with a primary focus on climate change impacts. It becomes evident that due to Large differences in regional climate scenarios, it is still impossible to give quantitative values for the most probable development, e.g., to assign probabilities to the simulated results. However, it becomes clear that water is a very crucial factor, and that an efficient and ecologically sound water management is a key question for the further development of that semi-arid region. The simulation results show that, independent of the differences in climate change scenarios, rain-fed farming is more vulnerable to drought impacts compared to irrigated farming. However, the capacity of irrigation and other water infrastructure systems to enhance resilience in respect to climatic fluctuations is significantly constrained given a significant negative precipitation trend. (c) 2005 Elsevier B.V. All rights reserved.}, language = {en} } @article{KoulakovSobolevWeberetal.2006, author = {Koulakov, Ivan and Sobolev, Stephan Vladimir and Weber, Bernd and Oreshin, Sergey and Wylegalla, Kurt and Hofstetter, Rami}, title = {Teleseismic tomography reveals no signature of the Dead Sea Transform in the upper mantle structure}, series = {Earth and planetary science letters}, volume = {252}, journal = {Earth and planetary science letters}, number = {1-2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-821X}, doi = {10.1016/j.epsl.2006.09.039}, pages = {189 -- 200}, year = {2006}, abstract = {We present results of a tomographic inversion of teleseismic data recorded at 48 stations of a temporary network which was installed in the area of the Dead Sea Transform (DST) and operated for 1 yr in the framework of the multidisciplinary DESERT Project. The 3366 teleseismic P and PKP phases from 135 events were hand picked and corrected for surface topography and crustal thickness. The inversion shows pronounced low-velocity anomalies in the crust, beneath the DST, which are consistent with recent results from local-source tomography. These anomalies are likely related to the young sediments and fractured rocks in the fault zone. The deeper the retrieved anomalies are quite weak. Most prominent is the high-velocity strip-like anomaly striking SE-NW. We attribute this anomaly to the inherited heterogeneity of lithospheric structure, with a possible contribution by the shallow Precambrian basement east of the DST and to lower crustal heterogeneity reported in this region by other seismic studies. We do not observe reliable signature of the DST in the upper mantle structure. Some weak indications of low-velocity anomalies in the upper mantle beneath the DST may well result from the down-smearing of the strong upper crustal anomalies. We also see very little topography of the lithosphere-asthenosphere boundary beneath the DST, which would generate significant horizontal velocity variations. These results are consistent with predictions from a recent thereto-mechanical model of the DST. Our tomographic model provides some indication of hot mantle flow from the deeper upper mantle rooted in the region of the Red Sea. However, resolution tests show that this anomaly may well be beyond resolution of the model. (c) 2006 Elsevier B.V. All rights reserved.}, language = {en} } @article{KonradSchmolkeBabistHandyetal.2006, author = {Konrad-Schmolke, Matthias and Babist, Jochen and Handy, Mark R. and O'brien, Patrick J.}, title = {The physico-chemical properties of a subducted slab from garnet zonation patterns (Sesia Zone, Western Alps)}, series = {Journal of petrology}, volume = {47}, journal = {Journal of petrology}, number = {11}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0022-3530}, doi = {10.1093/petrology/egl039}, pages = {2123 -- 2148}, year = {2006}, abstract = {Garnets in continentally derived high-pressure (HP) rocks of the Sesia Zone (Western Alps) exhibit three different chemical zonation patterns, depending on sample locality. Comparison of observed garnet zonation patterns with thermodynamically modelled patterns shows that the different patterns are caused by differences in the water content of the subducted protoliths during prograde metamorphism. Zonation patterns of garnets in water-saturated host rocks show typical prograde chemical zonations with steadily increasing pyrope content and increasing XMg, together with bell-shaped spessartine patterns. In contrast, garnets in water-undersaturated rocks have more complex zonation patterns with a characteristic decrease in pyrope and XMg between core and inner rim. In some cases, garnets show an abrupt compositional change in core-to-rim profiles, possibly due to water-undersaturation prior to HP metamorphism. Garnets from both water-saturated and water-undersaturated rocks show signs of intervening growth interruptions and core resorption. This growth interruption results from bulk-rock depletion caused by fractional garnet crystallization. The water content during burial influences significantly the physical properties of the subducted rocks. Due to enhanced garnet crystallization, water-undersaturated rocks, i.e. those lacking a free fluid phase, become denser than their water-saturated equivalents, facilitating the subduction of continental material. Although water-bearing phases such as phengite and epidote are stable up to eclogite-facies conditions in these rocks, dehydration reactions during subduction are lacking in water-undersaturated rocks up to the transition to the eclogite facies, due to the thermodynamic stability of such hydrous phases at high P-T conditions. Our calculations show that garnet zonation patterns strongly depend on the mineral parageneses stable during garnet growth and that certain co-genetic mineral assemblages cause distinct garnet zonation patterns. This observation enables interpretation of complex garnet growth zonation patterns in terms of garnet-forming reactions and water content during HP metamorphism, as well determination of detailed P-T paths.}, language = {en} } @article{KnoerichMutti2006, author = {Knoerich, Andrea Claudia and Mutti, Maria}, title = {Missing aragonitic biota and the diagenetic evolution of heterozoan carbonates : a case study from the Oligo- Miocene of the central Mediterranean}, issn = {1527-1404}, doi = {10.2110/Jsr.2006.065}, year = {2006}, abstract = {Several previous studies have addressed the diagenetic evolution of heterozoan carbonate assemblages. Generally it is assumed that early diagenetic processes in heterozoan settings are mainly destructive, including abrasion and dissolution on the sea floor. Constructive diagenesis (cementation) is delayed to later stages in the burial environment, with pressure solution of calcitic grains acting as a cement source. This paper presents a study of Oligo- Miocene inner- to outer-ramp heterozoan carbonates from the Central Mediterranean (Maltese Islands and Sicily) indicating that early diagenetic processes are more important than previously assumed. Four to five different cement types, including fibrous, two types of epitaxial, bladed and blocky cement, are distinguished based on transmitted light microscopy. Cathodoluminescence microscopy allowed a differentiation between primary high-Mg calcitic (fibrous and epitaxial cement I) and primary low-Mg calcitic (epitaxial cement II, bladed and blocky) cements. Stable-isotope data indicate cement precipitation from marine, marine-derived, and meteoric waters. Trace-element analyses point to cementation in an open system (Maltese Islands) and a closed system (Sicily). Our investigations show that the majority of constructive diagenetic processes in these rocks occurs rather early in the shallow, marine burial environment, which is transitional between the marine seafloor and the deep-burial diagenctic environment. The main cement source in this environment is assumed to be aragonite. We suggest careful consideration of the importance of aragonitic components in fossil heterozoan settings, which seem to be more abundant than previously assumed and can act as a major early cement source. Due to the low preservation potential of these components, detailed geochemical studies are necessary to detect aragonite as the cement source. Our findings also have implications when considering the reservoir qualities of these rocks, because primary porosity can be occluded early and secondary porosity is not preserved}, language = {en} } @article{JohnAdatteMutti2006, author = {John, Cedric Michael and Adatte, Thierry and Mutti, Maria}, title = {Regional trends in clay mineral fluxes to the Queensland margin and ties to middle Miocene global cooling}, issn = {0031-0182}, doi = {10.1016/j.palaeo.2005.09.010}, year = {2006}, abstract = {Three ODP sites located on the Marion Plateau, Northeast Australian margin, were investigated for clay mineral and bulk mineralogy changes through the early to middle Miocene. Kaolinite to smectite (K/S) ratios, as well as mass accumulation rates of clays, point to a marked decrease in accumulation of smectite associated with an increase in accumulation of kaolinite starting at similar to 15.6 Ma, followed by a, second increase in accumulation of kaolinite at similar to 13.2 Ma. Both of these increases are correlative to an increase in the calcite to detritus ratio. Comparison of our record with published precipitation proxies from continental Queensland indicates that increases in kaolinite did not correspond to more intense tropical-humid conditions, but instead to periods of greater aridity. Three mechanisms are explored to explain the temporal trends in clad, on the Marion Plateau: sea-level changes, changes in oceanic currents, and denudation of the Australian continent followed by reworking and eolian transport of clays. Though low mass accumulation rates of kaolinite are compatible with a possible contribution of eolian material after 14 Ma, when Australia became more arid, the lateral distribution of kaolinite along slope indicates mainly fluvial input for all clays and thus rules out this mechanism as well as oceanic current transport as the main controls behind clay accumulation on the plateau. We propose a model explaining the good correlation between long-term sea-level fall, decrease in smectite accumulation, increase in kaolinite accumulation and increase in carbonate input to the distal slope locations. We hypothesize that during low sea level and thus periods of drier continental climate in Queensland, early Miocene kaolinite-rich lacustrine deposits were being reworked, and that the progradation of the heterozoan carbonate platforms towards the basin center favored input of carbonate to the distal slope sites. The major find of our study is that increase kaolinite fluxes on the Queensland margin during the early and middle Miocene did not reflect the establishment of a tropical climate, and this stresses that care must be taken when reconstructing Australian climate based on deep-sea clay records alone.}, language = {en} } @article{IryuMatsudaMachiyamaetal.2006, author = {Iryu, Yasufumi and Matsuda, Hiroki and Machiyama, Hideaki and Piller, Werner E. and Quinn, Terrence M. and Mutti, Maria}, title = {Introductory perspective on the COREF project}, series = {The island arc : official journal of the Geological Society of Japan}, volume = {15}, journal = {The island arc : official journal of the Geological Society of Japan}, number = {4}, publisher = {Wiley-Blackwell}, address = {Oxford}, issn = {1038-4871}, doi = {10.1111/j.1440-1738.2006.00537.x}, pages = {393 -- 406}, year = {2006}, abstract = {Coral reefs are tropic to subtropic, coastal ecosystems comprising very diverse organisms. Late Quaternary reef deposits are fossil archives of environmental, tectonic and eustatic variations that can be used to reconstruct the paleoclimatic and paleoceano-graphic history of the tropic surface oceans. Reefs located at the latitudinal limits of coral-reef ecosystems (i.e. those at coral-reef fronts) are particularly sensitive to environmental changes-especially those associated with glacial-interglacial changes in climate and sealevel. We propose a land and ocean scientific drilling campaign in the Ryukyu Islands (the Ryukyus) in the northwestern Pacific Ocean to investigate the dynamic response of the corals and coral-reef ecosystems in this region to Late Quaternary climate and sealevel change. Such a drilling campaign, which we call the COREF (coral-reef front) Project, will allow the following three major questions to be evaluated: (i) What are the nature, magnitude and driving mechanisms of coral-reef front migration in the Ryukyus? (ii) What is the ecosystem response of coral reefs in the Ryukyus to Quaternary climate changes? (iii) What is the role of coral reefs in the global carbon cycle? Subsidiary objectives include (i) the timing of coral-reef initiation in the Ryukyus and its causes; (ii) the position of the Kuroshio current during glacial periods and its effects on coral-reef formation; and (iii) early carbonate diagenetic responses as a function of compounded variations in climate, eustacy and depositional mineralogies (subtropic aragonitic to warm-temperate calcitic). The geographic, climatic and oceanographic settings of the Ryukyu Islands provide an ideal natural laboratory to address each of these research questions.}, language = {en} } @phdthesis{Hultzsch2006, author = {Hultzsch, Nadja}, title = {Lakustrine Sedimente als Archive des sp{\"a}tquart{\"a}ren Umweltwandels in der Amery-Oase, Ostantarktis}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7980}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Im Rahmen einer deutsch-australischen Forschungskooperation erfolgte im S{\"u}dsommer 2001/2002 eine Expedition in die Amery-Oase (70°50'S, 68°00'E), die im Einzugsgebiet des Lambert-Gletscher/Amery-Schelfeis-Systems, dem gr{\"o}ßten ostantarktischen Eis-Drainagesystem, liegt. Von deutscher Seite wurden im Zuge der Gel{\"a}ndekampagne erstmals lakustrine Sedimentsequenzen gewonnen, um die bislang wenig erforschte sp{\"a}tquart{\"a}re Klima- und Umweltgeschichte dieser rund 1800 km2 großen eisfreien Region zu rekonstruieren. Die drei untersuchten Glazialseen Beaver, Radok und Terrasovoje unterscheiden sich sowohl deutlich in ihrer Gr{\"o}ße, Bathymetrie und den hydrologischen Merkmalen sowie in ihren Sedimentabfolgen. Einen Schwerpunkte dieser Doktorarbeit bildet die Rekonstruktion der Sedimentationsprozesse und des Ablagerungsmilieus sowie Untersuchungen zur Herkunft des detritischen Sedimentmaterials in den Seebecken. Der methodische Ansatz verfolgt die Charakterisierung der klastischen Sedimentfazies an Hand lithologisch-granulometrischer Merkmale sowie mineralogisch-geochemischer Analysen der Sedimentherkunft. Ein weiterer Schwerpunkt ist die Rekonstruktion der holoz{\"a}nen biogen gesteuerten Ablagerungsbedingungen im Terrasovoje-See, die R{\"u}ckschl{\"u}sse auf den kurzfristigen postglazialen Klima- und Umweltwandel in der Amery-Oase gestattet. Dabei wurden mikrofazielle Untersuchungsmethoden und hochaufl{\"o}sende Elementscannermessungen angewandt. Die klastische Sedimentherkunft in den drei Seen unterscheidet sich r{\"a}umlich deutlich voneinander und spiegelt den komplexen geologischen Aufbau der Amery-Oase wider. Als Sedimentquellen konnten pr{\"a}kambrische Metamorphite, permotriassische Sedimentgesteine und terti{\"a}re Lockersedimente identifiziert werden. Die Varibilit{\"a}t der Herkunftssignale ist zeitlich weniger deutlich als r{\"a}umlich ausgepr{\"a}gt und deutet auf relativ konstante Liefergebiete in den einzelnen Seen hin. Das glaziolakustrine Ablagerungsmilieu der drei untersuchten Seen zeigt klare r{\"a}umliche und zeitliche Unterschiede. In allen drei Seen setzen sich die {\"a}lteren Sedimente aus grobk{\"o}rnigem, h{\"a}ufig diamiktischem Material zusammen, w{\"a}hrend die j{\"u}ngeren Sedimente aus feink{\"o}rnigen Laminiten bestehen. Die lithofazielle Zweiteilung in den Sedimentabfolgen deutet auf einen R{\"u}ckzug der Gletscher und/oder einen Anstieg der Wassertiefen im {\"U}bergang von den grobk{\"o}rnigen zu den feink{\"o}rnigen Ablagerungseinheiten hin. Die oberen feink{\"o}rnigen Kernabschnitte spiegeln in allen drei Seen die postglaziale lakustrine Sedimentation wider. Im Beaver-See wird die postglaziale Fazies durch laminierte klastische Stillwassersedimente repr{\"a}sentiert, im Radok-See durch Turbiditsequenzen und im Terrasovoje-See durch Algenlaminite. Abgesehen vom Terrasovoje-See ist die zeitliche Einordnung der Fazieswechsel auf Grund mangelnder Altersinformationen schwer erfassbar. Im Terrasovoje-See setzte die postglaziale Sedimentation um rund 12,4 cal. ka ein. Somit weisen die darunterliegenden glazigenen Klastika mindestens ein sp{\"a}tpleistoz{\"a}nes Alter auf. Die sedimentologischen Eigenschaften, {\"A}nderungen der Sedimentationsraten und organogene Zusammensetzung der postglazialen Biogenlaminite des Terrasovoje-Sees deuten auf Variationen der pal{\"a}olimnologischen Bedingungen hinsichtlich Eisbedeckung, biologischer Produktivit{\"a}t, Wasserstand, Redoxbedingungen und Salinit{\"a}t hin, die mit regionalen holoz{\"a}nen Klima{\"a}nderungen in Verbindung gebracht werden k{\"o}nnen. Weitere Anhaltspunkte ergeben sich aus der Zusammensetzung und den M{\"a}chtigkeitsvariationen der Laminae, die generell aus Wechsellagerungen von Cyanobakterienmatten mit feinklastischen Lagen bestehen. Lagenz{\"a}hlungen der Laminae belegen {\"A}nderungen des Ablagerungsmilieus auf subdekadischen Zeitskalen, wobei zeitweilige j{\"a}hrliche Signale nicht ausgeschlossen werden k{\"o}nnen. Unter Ber{\"u}cksichtigung aller faziellen Indikatoren l{\"a}sst sich aus der Sedimentabfolge des Terrasovoje-Sees ein fr{\"u}hholoz{\"a}nes Klimaoptimum zwischen 9 und 7 cal. ka sowie weitere W{\"a}rmephasen zwischen 3,2 und 2,3 cal. ka sowie 1,5 und 1,0 cal. ka ableiten. Im Vergleich mit Eiskernarchiven und anderen Seesedimentabfolgen aus ostantarktischen Oasen zeigt sich, dass das Auftreten postglazialer Warmphasen nicht allenorts einem allgemein g{\"u}ltigen r{\"a}umlich-zeitlichen Muster folgt. Die Ursachen hierf{\"u}r liegen vermutlich in den lokalen geographischen Gegebenheiten. Es l{\"a}sst sich daraus schliessen, dass die bisher vorliegenden Klimarekonstruktionen eher das Lokalklima an einem Untersuchungsstandort als das Großklima der Ostantarktis reflektieren. Daraus ergibt sich die Notwendigkeit weiterer Untersuchungen von antarktischen Klimaarchiven und Untersuchungsstandorten, um {\"o}rtliche von {\"u}berregionalen Klimasignalen besser unterscheiden zu k{\"o}nnen.}, subject = {Antarktis}, language = {de} } @article{HetzelNiedermannTaoetal.2006, author = {Hetzel, Ralf and Niedermann, Samuel and Tao, Mingxin and Kubik, Peter W. and Strecker, Manfred}, title = {Climatic versus tectonic control on river incision at the margin of NE Tibet: Be-10 exposure dating of river terraces at the mountain front of the Qilian Shan}, series = {Journal of geophysical research : Earth surface}, volume = {111}, journal = {Journal of geophysical research : Earth surface}, publisher = {Union}, address = {Washington}, issn = {2169-9003}, doi = {10.1029/2005JF000352}, pages = {13}, year = {2006}, abstract = {[1] We document late Pleistocene - Holocene aggradation and incision processes at the mountain front of the Qilian Shan, an active intracontinental fold-and-thrust belt accommodating a significant portion of the India-Asia convergence. The Shiyou River cuts through a NNE vergent fault propagation fold with Miocene red beds in the core and Pliocene - Quaternary growth strata on the northern forelimb. South of the anticline, Miocene strata dip 20 degrees SSW, suggesting a similar orientation for the basal decollement. After aggradation of an similar to 150-m-thick, late Pleistocene valley fill, the Shiyou River formed three terraces. The highest terrace, located 170 m above the river, constitutes the top of the fill. The other terraces are fill cut terraces: their treads are located 130 - 105 m and 37 m above the river, respectively. The 10 Be exposure dating of the terraces suggests that river incision accelerated from 0.8 +/- 0.2 mm yr(-1) to similar to 10 mm yr(-1) at 10 - 15 kyr. We interpret fast Holocene river incision as largely unrelated to tectonic forcing. The late Pleistocene incision rate of 0.8 +/- 0.2 mm yr(-1) places an upper limit of 2.2 +/- 0.5 mm yr(-1) on the horizontal shortening rate, assuming that incision is solely caused by rock uplift above a decollement dipping 20 degrees. However, the actual shortening rate may lie between similar to 2.2 mm yr(-1) and zero because deformation of the terraces and the valley fill cannot be unequivocally demonstrated. Our estimate is consistent with the bulk shortening rate of similar to 5 - 10 mm yr(-1) across several faults in NE Tibet derived from neotectonic and GPS data, although in case of the Shiyou River, Holocene deformation is barely discernible owing to intense climate-induced river incision.}, language = {en} } @article{HerzschuhWinterWuennemannetal.2006, author = {Herzschuh, Ulrike and Winter, Katja and W{\"u}nnemann, Bernd and Li, Shijie}, title = {A general cooling trend on the central Tibetan Plateau throughout the Holocene recorded by the Lake Zigetang pollen spectra}, series = {Quaternary international : the journal of the International Union for Quaternary Research}, volume = {154}, journal = {Quaternary international : the journal of the International Union for Quaternary Research}, publisher = {Pergamon Press}, address = {Oxford}, issn = {1040-6182}, doi = {10.1016/j.quaint.2006.02.005}, pages = {113 -- 121}, year = {2006}, abstract = {A 741-cm-long laminated sediment core, covering the last 10,800 years was collected from Lake Zigetang, central Tibetan Plateau (90.9 degrees E, 32.0 degrees N, 4560m a.s.l.), and analysed palynologically at 69 horizons. Biome reconstruction suggests a dominance of temperate steppe vegetation (mainly Artemisia and Poaceae) on the central Tibetan Plateau during the first half of the Holocene (10.8-4.4 cal. ka BP), while alpine steppes with desert elements (mainly Cyperaceae, Poaceae, Chenopodiaceae, and characteristic high-alpine herb families) tend to dominate the second half (4.4-0 cal. ka BP). The Artemisia/Cyperaceae ratio-a semi-quantitative measure for summer temperature-indicates a general cooling trend throughout the Holocene. Dense temperate steppe vegetation and maximum desert plant withdrawal, however, indicate that a suitable balance of wet and warm conditions for optimum vegetation growth likely occurred during the middle Holocene (7.3-4.4 cal. ka BP). Severe Early Holocene cold events have been reconstructed for 8.7-8.3 and similar to 7.4 cal. ka BP. (c) 2006 Elsevier Ltd and INQUA. All rights reserved.}, language = {en} } @article{HattermannKrysanovaHabecketal.2006, author = {Hattermann, Fred Fokko and Krysanova, Valentina and Habeck, Anja and Bronstert, Axel}, title = {Integrating wetlands and riparian zones in river basin modelling}, series = {Ecological modelling : international journal on ecological modelling and engineering and systems ecolog}, volume = {199}, journal = {Ecological modelling : international journal on ecological modelling and engineering and systems ecolog}, number = {4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0304-3800}, doi = {10.1016/j.ecolmodel.2005.06.012}, pages = {379 -- 392}, year = {2006}, abstract = {Wetlands, and in particular riparian wetlands, represent an interface between the catchment area and the aquatic environment. They control the exchange of water and related chemical fluxes from the upper catchment area to surface waters like streams and lakes. Their influence on water and nutrient balances has been investigated mainly at the patch scale. In this study an attempt was made (a) to integrate riparian zones and wetlands into eco-hydrological river basin modelling, and (b) to quantify the impacts of riparian wetland processes on water and nutrient fluxes in a meso-scale catchment located in the northeastern German lowland. The investigation was performed by analysing hydro-chemical field data and applying the eco-hydrological model SWIM (Soil and Water Integrated Model), which was extended to reproduce the relevant water and nutrient flows and retention processes at the catchment scale in general, and in riparian zones and wetlands in particular. The main extensions introduced in the model were: (1) implementation of daily groundwater table dynamics at the hydrotope level, (2) implementation of water and nutrient uptake by plants from groundwater in riparian zones and wetlands, and (3) assessment of nutrient retention in groundwater and interflow. The simulation results indicate that wetlands, though they represent relatively small parts of the total catchment area, may have a significant impact on the overall water and nutrient balances of the catchment. The uncertainty of the simulation results is considerably high, with the main sources of uncertainty being the model parameters representing the geo-hydrology and the input data for land use management. (c) 2006 Elsevier B.V. All rights reserved.}, language = {en} } @article{HarlovTropperSeifertetal.2006, author = {Harlov, Daniel E. and Tropper, Peter and Seifert, Wolfgang and Nijland, Timo and F{\"o}rster, Hans-J{\"u}rgen}, title = {Formation of Al-rich titanite (CaTiSiO4O-CaAlSiO4OH) reaction rims on ilmenite in metamorphic rocks as a function of fH(2)O and fO(2)}, issn = {0024-4937}, doi = {10.1016/j.lithos.2005.08.005}, year = {2006}, abstract = {Reaction rims of titanite on ilmenite are described in samples from four terranes of amphibolite-facies metapelites and amphibolites namely the Tamil Nadu area, southern India; the Val Strona, area of the Ivrea-Verbano Zone, northern Italy, the Bamble Sector, southern Norway, and the northwestern Austroalpine Otztal Complex. The titanite rims, and hence the stability of titanite (CaTiSiO4O) and Al-OH titanite, i.e. vuaganatite (hypothetical end-member CaAlSiO4OH), are discussed in the light of fH(2)O- and fO(2)-buffered equilibria involving clinopyroxene, amphibole, biotite, ilmenite, magnetite, and quartz in the systems CaO-FeO/Fe2O3-TiO2-SiO2-H2O-O-2 (CFTSH) and CaO-FeO/Fe2O3-Al2O3- SiO2-H2O-O-2 (CFASH) present in each of the examples. Textural evidence suggests that titanite reaction rims on ilmenite in rocks from Tamil Nadu, Val Strona, and the Bamble Sector originated most likely due to hydration reactions such as clinopyroxene + ilmenite +quartz+ H2O = amphibole +titanite and oxidation reactions such as amphibole + ilmenite + O-2 = titanite + magnetite + quartz + H2O during amphibolite-facies metamorphism, or, as in the case of the Otztal Complex, during a subsequent greenschist-facies overprint. Overstepping of these reactions requires fH(2)O and fO(2) to be high for titanite formation, which is also in accordance with equilibria involving Al-OH titanite. This study shows that, in addition to P, T, bulk-rock composition and composition of the coexisting fluid, fO(2) and fH(2)O also play an important role in the formation of Al-bearing titanite during amphibolite- and greenschist-facies metamorphism.}, language = {en} } @article{HarlovJohanssonVanDenKerkhofetal.2006, author = {Harlov, Daniel E. and Johansson, L. and Van Den Kerkhof, A. and F{\"o}rster, Hans-J{\"u}rgen}, title = {The role of advective fluid flow and diffusion during localized, solid-state dehydration : Sondrum Stenhuggeriet, Halmstad, SW Sweden}, issn = {0022-3530}, year = {2006}, abstract = {A localized dehydration zone, Sondrum stone quarry, Halmstad, SW Sweden, consists of a central, 1 m wide granitic pegmatoid dyke, on either side of which extends a 2.5-3 m wide dehydration zone (650-700 degrees C; 800 MPa; orthopyroxene-clinopyroxene-biotite-amphibole-garnet) overprinting a local migmatized granitic gneiss (amphibole-biotite- garnet). Whole-rock chemistry indicates that dehydration of the granitic gneiss was predominantly isochemical. Exceptions include [Y + heavy rare earth elements (HREE)], Ba, Sr, and F, which are markedly depleted throughout the dehydration zone. Systematic trends in the silicate and fluorapatite mineral chemistry across the dehydration zone include depletion in Fe, (Y + HREE), Na, K, F, and Cl, and enrichment in Mg, Mn, Ca, and Ti. Fluid inclusion chemistry is similar in all three zones and indicates the presence of a fluid containing CO2, NaCl, and H2O components. Water activities in the dehydration zone average 0.36, or XH2O = 0.25. All lines of evidence suggest that the formation of the dehydration zone was due to advective transport of a CO2-rich fluid with a minor NaCl brine component originating from a tectonic fracture. Fluid infiltration resulted in the localized partial breakdown of biotite and amphiboles to pyroxenes releasing Ti and Ca, which were partitioned into the remaining biotite and amphibole, as well as uniform depletion in (Y + HREE), Ba, Sr, Cl, and F. At some later stage, H2O-rich fluids (H2O activity > 0.8) gave rise to localized partial melting and the probable injection of a granitic melt into the tectonic fracture, which resulted in the biotite and amphibole recording a diffusion profile for F across the dehydration zone into the granitic gneiss as well as a diffusion profile in Fe, Mn, and Mg for all Fe-Mg silicate minerals within 100 cm of the pegmatoid dyke}, language = {en} } @article{HalfarGodinezOrtaMuttietal.2006, author = {Halfar, Jochen and Godinez-Orta, Lucio and Mutti, Maria and Valdez-Holguin, Jose Eduardo and Borges, Jose M.}, title = {Carbonates calibrated against oceanographic parameters along a latitudinal transect in the Gulf of California, Mexico}, issn = {0037-0746}, doi = {10.1111/j.1365-3091.2005.00766.x}, year = {2006}, abstract = {Trophic resources are an important control governing carbonate production. Though this importance has long been recognized, no calibration exists to quantitatively compare biogenic assemblages within trophic resource fields. This study presents a field calibration of carbonate producers in a range of settings against high-resolution in situ measurements of nutrients, temperature and salinity. With its latitudinal extent from 30 degrees to 23 degrees N, the Gulf of California, Mexico, spans the warm-temperate realm and encompasses nutrient regimes from oligo-mesotrophic in the south to eutrophic in the north. Accordingly, from south to north carbonates are characterized by: (i) coral- dominated shallow carbonate factories (5-20 m water depth) with average sea-surface temperatures of 25 degrees C (min. 18 degrees C, max. 31 degrees C), average salinities of 35.06 parts per thousand and average chlorophyll a levels, which are a proxy for nutrients, of 0.25 mg Chl a m(-3) (max. 0.48, min. 0.1). (ii) Red algal-dominated subtidal to inner- shelf carbonate formation (10-25 m) in the central Gulf of California exhibiting average temperatures of 23 degrees C (min. 18 degrees C, max. 30 degrees C), average salinities of 35.25 parts per thousand, and average Chl a levels of 0.71 Chl a m(-3) (max. 5.62, min. 0). (iii) Molluskan bryozoan-rich inner to outer shelf factories in the northern Gulf of California (20-50 m) with average sea surface temperatures of only 20 degrees C (min. 13 degrees C, max 29 degrees C), average salinities of 35.01 parts per thousand, and average contents of 2.2 mg Chl a m(-3) (max. 8.38, min. 0). By calibrating sedimentological data with in situ measured oceanographic information in different environments, the response of carbonate producers to environmental parameters was established and extrapolated to carbonates on a global scale. The results demonstrate the importance of recognizing and quantifying trophic resources as a dominant control determining the biogenic composition and facies character of both modern and fossil carbonates}, language = {en} } @article{HainzlZoellerMain2006, author = {Hainzl, Sebastian and Z{\"o}ller, Gert and Main, Ian}, title = {Introduction to special issue: Dynamics of seismicity patterns and earthquake triggering - Preface}, series = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, volume = {424}, journal = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, number = {Special issue}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0040-1951}, doi = {10.1016/j.tecto.2006.03.034}, pages = {135 -- 138}, year = {2006}, language = {en} } @inproceedings{HainzlScherbaumZoeller2006, author = {Hainzl, Sebastian and Scherbaum, Frank and Z{\"o}ller, Gert}, title = {Spatiotemporal earthquake patterns}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7267}, year = {2006}, abstract = {Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @article{HainzlScherbaumBeauval2006, author = {Hainzl, Sebastian and Scherbaum, Frank and Beauval, C{\´e}line}, title = {Estimating background activity based on interevent-time distribution}, issn = {0037-1106}, doi = {10.1785/0120050053}, year = {2006}, abstract = {The statistics of time delays between successive earthquakes has recently been claimed to be universal and to show the existence of clustering beyond the duration of aftershock bursts. We demonstrate that these claims are unjustified. Stochastic simulations with Poissonian background activity and triggered Omori-type aftershock sequences are shown to reproduce the interevent-time distributions observed on different spatial and magnitude scales in California. Thus the empirical distribution can be explained without any additional long-term clustering. Furthermore, we find that the shape of the interevent-time distribution, which can be approximated by the gamma distribution, is determined by the percentage of main-shocks in the catalog. This percentage can be calculated by the mean and variance of the interevent times and varies between 5\% and 90\% for different regions in California. Our investigation of stochastic simulations indicates that the interevent-time distribution provides a nonparametric reconstruction of the mainshock magnitude-frequency distribution that is superior to standard declustering algorithm}, language = {en} } @article{HaberlandRietbrockLangeetal.2006, author = {Haberland, Christian and Rietbrock, Andreas and Lange, Dietrich and Bataille, Klaus and Hofmann, S.}, title = {Interaction between forearc and oceanic plate at the south-central Chilean margin as seen in local seismic data}, series = {Geophysical research letters}, volume = {33}, journal = {Geophysical research letters}, number = {23}, publisher = {Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1029/2006GL028189}, pages = {5}, year = {2006}, abstract = {We installed a dense, amphibious, temporary seismological network to study the seismicity and structure of the seismogenic zone in southern Chile between 37° and 39°S, the nucleation area of the great 1960 Chile earthquake. 213 local earthquakes with 14.754 onset times were used for a simultaneous inversion for the 1-D velocity model and precise earthquake locations. Relocated artificial shots suggest an accuracy of the earthquake hypocenter of about 1 km (horizontally) and 500 m (vertically). Crustal events along trench-parallel and transverse, deep-reaching faults reflect the interseismic transpressional deformation of the forearc crust due to the subduction of the Nazca plate. The transverse faults seems to accomplish differential lateral stresses between subduction zone segments. Many events situated in an internally structured, planar seismicity patch at 20 to 40 km depth near the coast indicate a stress concentration at the plate's interface at 38°S which might in part be induced by the fragmented forearc structure.}, language = {en} } @article{FoersterRhede2006, author = {F{\"o}rster, Hans-J{\"u}rgen and Rhede, Dieter}, title = {The Be-Ta-rich granite of Seiffen (eastern Erzgebirge, Germany)}, series = {Neues Jahrbuch f{\"u}r Mineralogie : Abhandlungen}, volume = {182}, journal = {Neues Jahrbuch f{\"u}r Mineralogie : Abhandlungen}, number = {3}, publisher = {Schweizerbart}, address = {Stuttgart}, issn = {0077-7757}, doi = {10.1127/0077-7757/2006/0055}, pages = {307 -- 321}, year = {2006}, abstract = {The mildly peraluminous granite of Seiffen, in the eastern Erzgebirge of Germany, is exposed by drillcores and associated with an abandoned Sri mine. The granite is of Stefanian age, with overlapping Th-U-total Pb monazite (302 +/- 4 Ma) and K-Ar siderophyllite ages (301 +/- 5 Ma). It is among the youngest granites in the Erzgebirge, emplaced in an extensional setting. The medium-grained, equigranular granite classifies as high-F, low-P Li-mica granite of A-type affinity. It is spatially associated with a high-Si rhyolitic microgranite, documenting the shallow intrusion level of this igneous association. Zircon, monazite-(Ce), and xenotime-(Y) constitute important radioactive accessory minerals in the granite, hosting the major proportions (> 80-90\%) of the bulk-rock budgets of the REE, Y, and Th. A significant percentage of U (40-50\%) may reside within unidentified phases or precipitated along grain boundaries. The most uncommon accessory phase is late-magmatic ytterbian xenotime-(Y) containing up to 11.2 wt\% Yb2O3, in addition to 7.3 wt\% Er2O3 and 7.9 wt\% Dy2O3. The Seiffen granite (epsilon(Nd(300)) = -4.6) is geochemically evolved and rich in Sri (23-63 ppm) and W (11-14 ppm). It contains elevated to high concentrations of incompatible lithophile elements such as F, Li, Ga, Rb, Y, Nb, Cs, REE, Th, and U, thus having much in common chemically with subvolcanic ongonites. The most prominent compositional feature is the strong enrichment (in ppm) in Be (51-55) and Ta (23-28). The granite exhibits flat chondrite-normalized REE patterns (La-N/Lu-N = 1.35-1.48) and a moderate negative Eu anomaly (Eu/Eu* = 0.12-0.13). Indications for alteration-induced, postmagmatic disturbances of initial elemental abundances are weak and mainly relate to the ore-forming elements Sri and U.}, language = {en} } @article{Foerster2006, author = {F{\"o}rster, Hans-J{\"u}rgen}, title = {Composition and origin of intermediate solid solutions in the system thorite-xenotime-zircon-coffinite}, issn = {0024-4937}, doi = {10.1016/j.lithos.2005.08.003}, year = {2006}, abstract = {A comprehensive survey of the accessory-mineral assemblages in Variscan granites of the German Erzgebirge and Pan-African granites from Jordan revealed the occurrence of intermediate solid solutions of the tetragonal thorite- xenotime-zircon-coffinite mineral group with partially novel compositions. These solid solutions preferentially formed in evolved and metasomatically altered, P-poor leucogranites of either I- or A-type affinity. Thorite from the Erzgebirge contained up to 18-8 Wt-\% Y2O3, 16.1 wt.\% ZrO2, and 23.3 Wt-\% UO2. Xenotime and zircon have incorporated Th in abundances up to 36.3 wt.\% and 41.8 wt.\% ThO2, respectively. Extended compositional gradation with only minor gaps is confined to hydrated members of this mineral group, and is observed to exist between thorite and xenotime, thorite and coffinite, and Y-HREE-bearing thorite and zircon. Complex, hydrous solid solutions containing elevated abundances of three or more of the endmembers are subordinate. Previously reported intermediate solid solutions between anhydrous zircon and xenotime, and anhydrous zircon and thorite, are not observed and are in conflict with experimental work demonstrating very limited miscibility between anhydrous species of endmember composition. The majority of hydrous intermediate solid solutions in the Th-Y-Zr-U system are likely thermodynamically unstable. Instead, they are probably metastable responses to unusual physico-chemical conditions involving various parameters and conditions, the relative importance of which is incompletely known. Leaching and dissolution of preexisting accessory phases during interaction with F-bearing hydrous fluids enriched in Th, Y(HREE), Zr, and/or U, and common deposition of the various elements at disequilibrium (supersaturation) seems to play a key role, but other processes may be of similar importance. Experimental work involving hydrous conditions and complex systems composed of more than two endmembers are needed to shed light into the stability relations of the chemically uncommon compositions treated in this study.}, language = {en} } @article{EwaldIgelHinzenetal.2006, author = {Ewald, Michael and Igel, Heiner and Hinzen, Klaus-G{\"u}nther and Scherbaum, Frank}, title = {Basin-related effects on ground motion for earthquake scenarios in the Lower Rhine Embayment}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2006.02909.x}, year = {2006}, abstract = {The deterministic calculation of earthquake scenarios using complete waveform modelling plays an increasingly important role in estimating shaking hazard in seismically active regions. Here we apply 3-D numerical modelling of seismic wave propagation to M 6+ earthquake scenarios in the area of the Lower Rhine Embayment, one of the seismically most active regions in central Europe. Using a 3-D basin model derived from geology, borehole information and seismic experiments, we aim at demonstrating the strong dependence of ground shaking on hypocentre location and basin structure. The simulations are carried out up to frequencies of ca. 1 Hz. As expected, the basin structure leads to strong lateral variations in peak ground motion, amplification and shaking duration. Depending on source-basin-receiver geometry, the effects correlate with basin depth and the slope of the basin flanks; yet, the basin also affects peak ground motion and estimated shaking hazard thereof outside the basin. Comparison with measured seismograms for one of the earthquakes shows that some of the main characteristics of the wave motion are reproduced. Cumulating the derived seismic intensities from the three modelled earthquake scenarios leads to a predominantly basin correlated intensity distribution for our study area}, language = {en} } @article{DouglasBungumScherbaum2006, author = {Douglas, John and Bungum, Hilmar and Scherbaum, Frank}, title = {Ground-motion prediction equations for Southern Spain and Southern Norway obtained using the composite model perspective}, issn = {1363-2469}, doi = {10.1080/1363246060935058}, year = {2006}, abstract = {In this paper, two sets of earthquake ground-motion relations to estimate peak ground and response spectral acceleration are developed for sites in southern Spain and in southern Norway using a recently published composite approach. For this purpose seven empirical ground-motion relations developed from recorded strong-motion data from different parts of the world were employed. The different relations were first adjusted based on a number of transformations to convert the differing choices of independent parameters to a single one. After these transformations, which include the scatter introduced, were performed, the equations were modified to account for differences between the host and the target regions using the stochastic method to compute the host-to-target conversion factors. Finally functions were fitted to the derived ground-motion estimates to obtain sets of seven individual equations for use in probabilistic seismic hazard assessment for southern Spain and southern Norway. The relations are compared with local ones published for the two regions. The composite methodology calls for the setting up of independent logic trees for the median values and for the sigma values, in order to properly separate epistemic and aleatory uncertainties after the corrections and the conversions}, language = {en} } @article{DialloKuleshHolschneideretal.2006, author = {Diallo, Mamadou Sanou and Kulesh, Michail and Holschneider, Matthias and Scherbaum, Frank and Adler, Frank}, title = {Characterization of polarization attributes of seismic waves using continuous wavelet transforms}, issn = {0016-8033}, doi = {10.1190/1.2194511}, year = {2006}, abstract = {Complex-trace analysis is the method of choice for analyzing polarized data. Because particle motion can be represented by instantaneous attributes that show distinct features for waves of different polarization characteristics, it can be used to separate and characterize these waves. Traditional methods of complex-trace analysis only give the instantaneous attributes as a function of time or frequency. However. for transient wave types or seismic events that overlap in time, an estimate of the polarization parameters requires analysis of the time-frequency dependence of these attributes. We propose a method to map instantaneous polarization attributes of seismic signals in the wavelet domain and explicitly relate these attributes with the wavelet-transform coefficients of the analyzed signal. We compare our method with traditional complex-trace analysis using numerical examples. An advantage of our method is its possibility of performing the complete wave-mode separation/ filtering process in the wavelet domain and its ability to provide the frequency dependence of ellipticity, which contains important information on the subsurface structure. Furthermore, using 2-C synthetic and real seismic shot gathers, we show how to use the method to separate different wave types and identify zones of interfering wave modes}, language = {en} } @article{DialloKuleshHolschneideretal.2006, author = {Diallo, Mamadou Sanou and Kulesh, Michail and Holschneider, Matthias and Kurennaya, Kristina and Scherbaum, Frank}, title = {Instantaneous polarization attributes based on an adaptive approximate covariance method}, series = {Geophysics}, volume = {71}, journal = {Geophysics}, number = {5}, publisher = {SEG}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/1.2227522}, pages = {V99 -- V104}, year = {2006}, abstract = {We introduce a method for computing instantaneous-polarization attributes from multicomponent signals. This is an improvement on the standard covariance method (SCM) because it does not depend on the window size used to compute the standard covariance matrix. We overcome the window-size problem by deriving an approximate analytical formula for the cross-energy matrix in which we automatically and adaptively determine the time window. The proposed method uses polarization analysis as applied to multicomponent seismic by waveform separation and filtering.}, language = {en} } @article{DeekenSobelCoutandetal.2006, author = {Deeken, Anke and Sobel, Edward and Coutand, Isabelle and Haschke, Michael and Riller, Ulrich and Strecker, Manfred}, title = {Development of the southern Eastern Cordillera, NW Argentina, constrained by apatite fission track thermochronology: From early Cretaceous extension to middle Miocene shortening}, series = {Tectonics}, volume = {25}, journal = {Tectonics}, number = {6}, publisher = {Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1029/2005TC001894}, pages = {21}, year = {2006}, abstract = {[ 1] For the Puna Plateau and Eastern Cordillera of NW Argentina, the temporal and spatial pattern of deformation and surface uplift remain poorly constrained. Analysis of completely and partially reset apatite fission track samples collected from vertical profiles along an ESE trending transect extending from the plateau interior across the southern Eastern Cordillera at similar to 25 degrees S reveals important constraints on the deformation and exhumation history of this part of the Andes. The data constrain the Neogene Andean development of the Eastern Cordillera as well as rift-related exhumation for some of the sampled locations in the Late Jurassic/Early Cretaceous. An intervening Eocene-Oligocene exhumation episode in the southern Eastern Cordillera was probably related to crustal shortening. Subsequent reburial of the area by Andean foreland basin strata commenced between 30 and 25 Myr. Magnitude and duration of sedimentation, revealed by thermal modeling, differ between the sample locations, pointing to an eastward propagating basin system. In the southern Eastern Cordillera, Andean deformation commenced at 22.5 - 21 Myr, predating both the inferred formation of significant topography by 5 - 7.5 Myr and preservation of sediments in the adjacent Cenozoic basins by 6.5 - 8 Myr. Comparing the calculated structural depth of partially reset samples suggests that newly formed west dipping reverse faults along the former Salta Rift margin accommodated most of the Neogene tectonic movement. Late Cenozoic deformation at the southern Eastern Cordillera began earlier in the west and subsequently propagated eastward. The lateral growth of the orogen is coupled with a foreland basin system developing in front of the range and then becomes subsequently compartmentalized by later emergent topography.}, language = {en} } @article{DeAndradeVidalLewinetal.2006, author = {De Andrade, V. and Vidal, O. and Lewin, E. and Agard, P. and O'brien, Patrick}, title = {Quantification of electron microprobe compositional maps of rock thin sections: an optimized method and examples}, series = {Journal of metamorphic geology}, volume = {24}, journal = {Journal of metamorphic geology}, publisher = {Wiley-Blackwell}, address = {Oxford}, issn = {0263-4929}, doi = {10.1111/j.1525-1314.2006.00660.x}, pages = {655 -- 668}, year = {2006}, abstract = {Quantification of discrete pressure-temperature domains in deformed chlorite + white mica-bearing metapelites was undertaken on mineral compositions derived by two-dimensional microprobe compositional mapping of selected areas of rock thin sections. In order to achieve compositional information at sufficient analytical precision, spatial resolution and sample coverage within a typical analysis time of 1 day, an optimization of measurement methods was necessary. The method presented here allows collection of raw counts for eight different element concentrations at an analytical precision of similar to 1-2 wt\%. X-ray intensity multiplane maps (one map per measured chemical element) are translated into concentration multiplane maps, utilizing selected conventionally measured spot analyses combined with the Castaing approximation for each mineral. As this step requires identification of the different minerals present in the mapped area, a statistical clustering technique to identify different groups of composition was developed, guided by simple petrographic inspection of the thin section, to delineate the important minerals in the mapped area. Finally, the compositions of each pixel are translated into a mineral structural formula thus yielding a new kind of image with a high content of petrological information. The reliability of the mineral composition images was emphasized by carrying out precision tests on the analytical data. The possible use of chemical maps to infer the P-T-deformation history of metamorphic rocks is illustrated with two samples from the Spitzbergen and the Sambagawa blueschist facies belts. In both samples, a strong correlation between structures and chemistry is observed. Qualitative estimates of P-T conditions from the Si-content of mica and chlorite are in good agreement with their location in microstructures that formed at different times. Therefore, the combination of chemical maps with microstructural observations is a very powerful approach to understand both the evolution of complex metamorphic rocks and the control by deformation of mineral reactivity.}, language = {en} } @article{CoutandCarrapaDeekenetal.2006, author = {Coutand, Isabelle and Carrapa, Barbara and Deeken, Anke and Schmitt, Axel K. and Sobel, Edward and Strecker, Manfred}, title = {Propagation of orographic barriers along an active range front : insights from sandstone petrography and detrital apatite fission-track thermochronology in the intramontane Angastaco basin, NW Argentina}, issn = {0950-091X}, doi = {10.1111/j.1365-2117.2006.00283.x}, year = {2006}, abstract = {The arid Puna plateau of the southern Central Andes is characterized by Cenozoic distributed shortening forming intramontane basins that are disconnected from the humid foreland because of the defeat of orogen-traversing channels. Thick Tertiary and Quaternary sedimentary fills in Puna basins have reduced topographic contrasts between the compressional basins and ranges, leading to a typical low-relief plateau morphology. Structurally identical basins that are still externally drained straddle the eastern border of the Puna and document the eastward propagation of orographic barriers and ensuing aridification. One of them, the Angastaco basin, is transitional between the highly compartmentalized Puna highlands and the undeformed Andean foreland. Sandstone petrography, structural and stratigraphic analysis, combined with detrital apatite fission-track thermochronology from a similar to 6200-m-thick Miocene to Pliocene stratigraphic section in the Angastaco basin, document the late Eocene to late Pliocene exhumation history of source regions along the eastern border of the Puna (Eastern Cordillera (EC)) as well as the construction of orographic barriers along the southeastern flank of the Central Andes. Onset of exhumation of a source in the EC in late Eocene time as well as a rapid exhumation of the Sierra de Luracatao (in the EC) at about 20 Ma are recorded in the detrital sediments of the Angastaco basin. Sediment accumulation in the basin began similar to 15 Ma, a time at which the EC had already built sufficient topography to prevent Puna sourced detritus from reaching the basin. After similar to 13 Ma, shortening shifted eastward, exhuming ranges that preserve an apatite fission-track partial annealing zone recording cooling during the late Cretaceous rifting event. Facies changes and fossil content suggest that after 9 Ma, the EC constituted an effective orographic barrier that prevented moisture penetration into the plateau. Between 3.4 and 2.4 Ma, another orographic barrier was uplifted to the east, leading to further aridification and pronounced precipitation gradients along the mountain front. This study emphasizes the important role of tectonics in the evolution of climate in this part of the Andes}, language = {en} } @article{CarrapaStreckerSobel2006, author = {Carrapa, Barbara and Strecker, Manfred and Sobel, Edward}, title = {Cenozoic orogenic growth in the Central Andes : evidence from sedimentary rock provenance and apatite fission track thermochronology in the Fiambala Basin, southernmost Puna Plateau margin (NW Argentina)}, issn = {0012-821X}, doi = {10.1016/j.epsl.2006.04.010}, year = {2006}, abstract = {Intramontane sedimentary basins along the margin of continental plateaus often preserve strata that contain fundamental information regarding the pattern of orogenic growth. The sedimentary record of the elastic Miocene-Pliocene sequence deposited in the Fiambala Basin, at the southern margin of the Puna Plateau (NW Argentina), documents the late Miocene paleodrainage evolution from headwaters to the west, towards headwaters in the ranges that constitute the border of the Puna Plateau to the north. Apatite Fission track (AFT) thermochronology of sedimentary and basement rocks show that the southern Puna Plateau was the source for the youngest, middle Miocene, detrital population detected in late Miocene rocks; and that the margin of the Puna Plateau expressed a high relief, possibly similar to or higher than at present, by late Miocene time. Cooling ages obtained from basement rocks at the southern Puna margin suggest that exhumation started in the Oligocene and continued until the middle Miocene. We interpret the basin reorganization and the creation of a high relief plateau margin to be the direct response of the source-basin system to a wholesale surface uplift event that may have occurred during the late Cenozoic in the Puna-Altiplano region. At this time coeval paleodrainage reorganization is observed not only in the Fiambala Basin, but also in different basins along the southern and eastern Puna margin, suggesting a genetic link between the last stage of plateau formation and basin response. However, this event did not cause sufficient exhumation of basin bounding ranges to be recorded by AFT thermochronology. Our new data thus document a decoupling between late Cenozoic surface uplift and exhumation in the southern Puna Plateau. High relief achieved at the Puna margin by late Miocene time is linked to Oligocene-Miocene exhumation; no significant erosion (< 3 km) has occurred since in this and highland.}, language = {en} } @article{BudwegBockWeber2006, author = {Budweg, Martin and Bock, G{\"u}nter and Weber, Michael H.}, title = {The Eifel Plume : imaged with converted seismic waves}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2005.02778.x}, year = {2006}, abstract = {Receiver functions (RF) are used to investigate the upper mantle structure beneath the Eifel, the youngest volcanic area of Central Europe. Data from 96 teleseismic events recorded by 242 seismological stations from permanent and a temporary network has been analysed. The temporary network operated from 1997 November to 1998 June and covered an area of approximately 400 x 250 km(2) centred on the Eifel volcanic fields. The average Moho depth in the Eifel is approximately 30 km, thinning to ca. 28 km under the Eifel volcanic fields. RF images suggest the existence of a low velocity zone at about 60-90 km depth under the West Eifel. This observation is supported by P- and S-wave tomographic results and absorption (but the array aperture limits the resolution of the tomographic methods to the upper 400 km). There are also indications for a zone of elevated velocities at around 200 km depth, again in agreement with S-wave and absorption tomographic results. This anomaly is not visible in P-wave tomography and could be due to S-wave anisotropy. The RF anomalies at the Moho, at 60-90 km, and near 200 km depth have a lateral extent of about 100 km. The 410 km discontinuity under the Eifel is depressed by 15-25 km, which could be explained by a maximum temperature increase of +200 degrees C to +300 degrees C. In the 3-D RF image of the Eifel Plume we also notice two additional currently unexplained conversions between 410 and 550 km depth. They could represent remnants of previous subduction or anomalies due to delayed phase changes. The lateral extent of these conversions and the depression of the 410 km discontinuity is about 200 km. The 660 km discontinuity does not show any depth deviation from its expected value. Our observations are consistent with interpretation in terms of an upper mantle plume but they do not rule out connections to processes at larger depth}, language = {en} } @article{BreiterFoersterSkoda2006, author = {Breiter, Karel and F{\"o}rster, Hans-J{\"u}rgen and Skoda, Radek}, title = {Extreme P-, Bi-, Nb-, Sc-, U- and F-rich zircon from fractionated perphosphorous granites: the peraluminous Podlesi granite system, Czech Republic}, issn = {0024-4937}, doi = {10.1016/j.lithos.2005.08.011}, year = {2006}, abstract = {The strongly peraluminous and P-rich, protolithionite and zinnwaldite leucogranites from Podlesi, western Krusne Hory Mts., Czech Republic, contain accessory zircon with extraordinary enrichment of several elements, which constitute trace elements in common zircon. Elements showing a not yet reported anomalous enrichment include P (up to 20.2 wt.\% P2O5; equivalent to 0.60 apfu, formula calculated on the basis of 4 oxygen atoms), Bi (up to 9.0 wt.\% Bi2O3; 0.086 apfu), Nb (up to 6.7 wt.\% Nb2O5, 0.12 apfu), Sc (up to 3.45 wt.\% Sc2O3; 0.10 apfu), U (up to 14.8 wt.\% UO2; 0.12 apfu) and F (up to 3.81 wt.\% F; 0.42 apfu). Strong enrichment of P preferentially involved the berlinite-type substitution (2 Si4+ double left right arrow P5+ + Al3+) implying that significant Al may enter the Si position in zircon. Incorporation of other exotic elements is primarily governed by the xenotime (Si4++Zr4+ double left right arrow P5++Y3+), pretulite (Sc3++P5+ double left right arrow Zr4++Si4+), brabantite-type (Ca2++(U, Th)(4+)+2P(5+) double left right arrow 2Zr(4+)+2Si(4+)), and ximengite-type (Bi3++P5+double left right arrow Zr4++Si4+) substitution reactions. One part of the anomalous zircons formed late-magmatically, from a strongly peraluminous, P-F-U-rich hydrous residual melt that gave rise to the zinnwaldite granite. Interaction with aggressive residual fluids and metamictization have further aided in element enrichment or depletion, particularly in altered parts of zircon contained in the protolithionite granite. Most of the zircon from F-rich greisens have a composition close to endmember ZrSiO4 and are chemically distinct from zircon in its granite parent. This discrepancy implies that at Podlesi, granitic zircon became unstable and completely dissolved during greisenization. Part of the mobilized elements was reprecipitated in newly grown, hydrothermal zircon.}, language = {en} } @misc{BousquetDeCapitaniArcay2006, author = {Bousquet, Romain and De Capitani, Christian and Arcay, Diane}, title = {Feedback of the metamorphic changes on the subducting processes}, series = {Geochimica et cosmochimica acta : journal of the Geochemical Society and the Meteoritical Society}, volume = {70}, journal = {Geochimica et cosmochimica acta : journal of the Geochemical Society and the Meteoritical Society}, number = {18}, publisher = {Elsevier}, address = {Oxford}, issn = {0016-7037}, doi = {10.1016/j.gca.2006.06.228}, pages = {A62 -- A62}, year = {2006}, language = {en} } @article{BookhagenFleitmannNishiizumietal.2006, author = {Bookhagen, Bodo and Fleitmann, Dominik and Nishiizumi, Kunihiko and Strecker, Manfred and Thiede, Rasmus Christoph}, title = {Holocene monsoonal dynamics and fluvial terrace formation in the northwest Himalaya, India}, issn = {0091-7613}, doi = {10.1130/G22698.1}, year = {2006}, abstract = {Aluminum-26 and beryllium-10 surface exposure dating on cut-and-fill river-terrace surfaces from the lower Sutlej Valley (northwest Himalaya) documents the close link between Indian Summer Monsoon (ISM) oscillations and intervals of enhanced fluvial incision. During the early Holocene ISM optimum, precipitation was enhanced and reached far into the internal parts of the orogen. The amplified sediment flux from these usually dry but glaciated areas caused alluviation of downstream valleys up to 120 m above present grade at ca. 9.9 k.y. B.P. Terrace formation (i.e., incision) in the coarse deposits occurred during century-long weak ISM phases that resulted in reduced moisture availability and most likely in lower sediment flux. Here, we suggest that the lower sediment flux during weak ISM phases allowed rivers to incise episodically into the alluvial fill}, language = {en} } @article{BookhagenEchtlerMelnicketal.2006, author = {Bookhagen, Bodo and Echtler, Helmut Peter and Melnick, Daniel and Strecker, Manfred and Spencer, Joel Q. G.}, title = {Using uplifted Holocene beach berms for paleoseismic analysis on the Santa Maria Island, south-central Chile}, issn = {0094-8276}, doi = {10.1029/2006gl026734}, year = {2006}, abstract = {Major earthquakes ( M > 8) have repeatedly ruptured the Nazca-South America plate interface of south-central Chile involving meter scale land-level changes. Earthquake recurrence intervals, however, extending beyond limited historical records are virtually unknown, but would provide crucial data on the tectonic behavior of forearcs. We analyzed the spatiotemporal pattern of Holocene earthquakes on Santa Maria Island (SMI; 37 degrees S), located 20 km off the Chilean coast and approximately 70 km east of the trench. SMI hosts a minimum of 21 uplifted beach berms, of which a subset were dated to calculate a mean uplift rate of 2.3 +/- 0.2 m/ky and a tilting rate of 0.022 +/- 0.002 degrees/ky. The inferred recurrence interval of strandline-forming earthquakes is similar to 180 years. Combining coseismic uplift and aseismic subsidence during an earthquake cycle, the net gain in strandline elevation in this environment is similar to 0.4 m per event}, language = {en} } @article{BoenigerTronickeHolligeretal.2006, author = {Boeniger, Urs and Tronicke, Jens and Holliger, Klaus and Becht, Andreas}, title = {Multi-offset vertical radar profiling for subsurface reflection imaging}, series = {Journal of environmental \& engineering geophysics : JEEG}, volume = {11}, journal = {Journal of environmental \& engineering geophysics : JEEG}, number = {4}, publisher = {EEGS}, address = {Denver}, issn = {1083-1363}, doi = {10.2113/JEEG11.4.289}, pages = {289 -- 298}, year = {2006}, abstract = {The vertical radar profiling (VRP) technique uses surface-to-borehole acquisition geometries comparable to vertical seismic profiling (VSP). Major differences between the two methods do arise due to the fundamentally differing nature of the velocity-depth gradients and transmitter/receiver directivities. Largely for this reason, VRP studies have so far essentially been limited to the reconstruction of velocity-depth profiles by inverting direct arrival times from single-offset VRP surveys. In this study, we investigate the potential to produce high-resolution subsurface reflection images from multi-offset VRP data. Two synthetic data sets are used to evaluate a processing strategy suitably adapted from VSP processing. Despite the fundamental differences between VRP and VSP data, we found that our processing approach is capable of reconstructing subsurface structures of comparable complexity to those routinely imaged by VSP data. Finally, we apply our processing flow to two multi-offset VRP data sets recorded at a well constrained hydrogeophysical test site in SW-Germany. The inferred VRP images are compared with high-quality surface georadar reflection images and lithological logs available at the borehole locations. We find that the VRP images are in good agreement with the surface georadar data and reliably detect the major lithological boundaries. Due to the significantly shorter ray-paths, the depth penetration of the VRP data is, however, considerably higher than that of the surface georadar data. VRP reflection images thus provide an effective means for the depth-calibration and extension of conventional surface georadar data in the vicinity of boreholes.}, language = {en} } @article{BeauvalHainzlScherbaum2006, author = {Beauval, C{\´e}line and Hainzl, Sebastian and Scherbaum, Frank}, title = {Probabilistic seismic hazard estimation in low-seismicity regions considering non-Poissonian seismic occurrence}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2006.02863.x}, year = {2006}, abstract = {In low-seismicity regions, such as France or Germany, the estimation of probabilistic seismic hazard must cope with the difficult identification of active faults and with the low amount of seismic data available. Since the probabilistic hazard method was initiated, most studies assume a Poissonian occurrence of earthquakes. Here we propose a method that enables the inclusion of time and space dependences between earthquakes into the probabilistic estimation of hazard. Combining the seismicity model Epidemic Type Aftershocks-Sequence (ETAS) with a Monte Carlo technique, aftershocks are naturally accounted for in the hazard determination. The method is applied to the Pyrenees region in Southern France. The impact on hazard of declustering and of the usual assumption that earthquakes occur according to a Poisson process is quantified, showing that aftershocks contribute on average less than 5 per cent to the probabilistic hazard, with an upper bound around 18 per cent}, language = {en} } @article{BeauvalHainzlScherbaum2006, author = {Beauval, Celine and Hainzl, Sebastian and Scherbaum, Frank}, title = {The impact of the spatial uniform distribution of seismicity on probabilistic seismic-hazard estimation}, series = {Bulletin of the Seismological Society of America}, volume = {96}, journal = {Bulletin of the Seismological Society of America}, number = {6}, publisher = {GeoScienceWorld}, address = {Alexandria, Va.}, issn = {0037-1106}, doi = {10.1785/0120060073}, pages = {2465 -- 2471}, year = {2006}, abstract = {The first step in the estimation of probabilistic seismic hazard in a region commonly consists of the definition and characterization of the relevant seismic sources. Because in low-seismicity regions seismicity is often rather diffuse and faults are difficult to identify, large areal source zones are mostly used. The corresponding hypothesis is that seismicity is uniformly distributed inside each areal seismic source zone. In this study, the impact of this hypothesis on the probabilistic hazard estimation is quantified through the generation of synthetic spatial seismicity distributions. Fractal seismicity distributions are generated inside a given source zone and probabilistic hazard is computed for a set of sites located inside this zone. In our study, the impact of the spatial seismicity distribution is defined as the deviation from the hazard value obtained for a spatially uniform seismicity distribution. From the generation of a large number of synthetic distributions, the correlation between the fractal dimension D and the impact is derived. The results show that the assumption of spatially uniform seismicity tends to bias the hazard to higher values. The correlation can be used to determine the systematic biases and uncertainties for hazard estimations in real cases, where the fractal dimension has been determined. We apply the technique in Germany (Cologne area) and in France (Alps).}, language = {en} } @article{ArcayDoinTricetal.2006, author = {Arcay, Diane and Doin, Marie Pierre and Tric, Emmanuel and Bousquet, Romain and de Capitani, Christian}, title = {Overriding plate thinning in subduction zones : localized convection induced by slab dehydration}, issn = {1525-2027}, doi = {10.1029/2005gc001061}, year = {2006}, abstract = {In subduction zones, many observations indicate that the backarc thermal state is particularly hot and that the upper lithosphere is thin, even if no recent extension episode has occurred. This might result from free thermal convection favored by low viscosities in the hydrated mantle wedge. We perform 2-D numerical experiments of the convective mantle wedge interaction with both the downgoing slab and the overriding plate to test this hypothesis, explore its physical mechanism, and assess its dependencies on some relevant rock properties. Water transfers across the subducting plate and the mantle wedge are explicitly modeled by including in the calculation realistic hydration/ dehydration reaction boundaries for a water-saturated mantle and oceanic crust. The rheology is non-Newtonian and temperature-, pressure-, and water content-dependent. For low strength reduction associated to water content, the upper plate is locally thinned by an enhanced corner flow. For larger strength reductions, small convection cells rapidly thin the upper plate ( in less than 15 Myr) over the area in the overriding lithosphere hydrated by slab-derived water fluxes. As a result, the thinned region location depends on the subducting plate thermal state, and it increases with high convergence rates and low subduction dip angles. Other simulations are performed to test the sole effect of hydrous rock weakening on the upper plate/mantle convective interaction. They show that the thinning process is not influenced by the corner flow, but develops at the favor of a decoupling level induced by the formation of hydroxylated minerals inside the hydrated lithosphere. The erosion mechanism identified in these simulations allows us to explain the characteristic duration of erosion as a function of the hydrous strength reduction. We find that the presence of amphibole in the upper lithosphere in significant proportions is required down to a temperature of about 980 degrees C, corresponding to an initial depth of similar to 70 km, to strongly decrease the strength of the base of the lithosphere and trigger a rapid erosion (< 15 Myr).}, language = {en} } @article{AlonsoBookhagenCarrapaetal.2006, author = {Alonso, Ricardo N. and Bookhagen, Bodo and Carrapa, Barbara and Coutand, Isabelle and Haschke, Michael and Hilley, George E. and Schoenbohm, Lindsay M. and Sobel, Edward and Strecker, Manfred and Trauth, Martin H. and Villanueva, Arturo}, title = {Tectonics, climate and landscape evolution of the Southern Central Andes : the Argentine Puna Plateau and adjacent regions between 22 and 30°S}, isbn = {978-3-540- 24329-8}, year = {2006}, language = {en} }