@misc{AgarwalMarwanMaheswaranetal.2020, author = {Agarwal, Ankit and Marwan, Norbert and Maheswaran, Rathinasamy and {\"O}zt{\"u}rk, Ugur and Kurths, J{\"u}rgen and Merz, Bruno}, title = {Optimal design of hydrometric station networks based on complex network analysis}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {951}, issn = {1866-8372}, doi = {10.25932/publishup-47100}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471006}, pages = {19}, year = {2020}, abstract = {Hydrometric networks play a vital role in providing information for decision-making in water resource management. They should be set up optimally to provide as much information as possible that is as accurate as possible and, at the same time, be cost-effective. Although the design of hydrometric networks is a well-identified problem in hydrometeorology and has received considerable attention, there is still scope for further advancement. In this study, we use complex network analysis, defined as a collection of nodes interconnected by links, to propose a new measure that identifies critical nodes of station networks. The approach can support the design and redesign of hydrometric station networks. The science of complex networks is a relatively young field and has gained significant momentum over the last few years in different areas such as brain networks, social networks, technological networks, or climate networks. The identification of influential nodes in complex networks is an important field of research. We propose a new node-ranking measure - the weighted degree-betweenness (WDB) measure - to evaluate the importance of nodes in a network. It is compared to previously proposed measures used on synthetic sample networks and then applied to a real-world rain gauge network comprising 1229 stations across Germany to demonstrate its applicability. The proposed measure is evaluated using the decline rate of the network efficiency and the kriging error. The results suggest that WDB effectively quantifies the importance of rain gauges, although the benefits of the method need to be investigated in more detail.}, language = {en} } @phdthesis{Aich2015, author = {Aich, Valentin}, title = {Floods in the Niger River Basin in the face of global change}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-91577}, school = {Universit{\"a}t Potsdam}, pages = {xxi, 275}, year = {2015}, abstract = {In the last decade, the number and dimensions of catastrophic flooding events in the Niger River Basin (NRB) have markedly increased. Despite the devastating impact of the floods on the population and the mainly agriculturally based economy of the riverine nations, awareness of the hazards in policy and science is still low. The urgency of this topic and the existing research deficits are the motivation for the present dissertation. The thesis is an initial detailed assessment of the increasing flood risk in the NRB. The research strategy is based on four questions regarding (1) features of the change in flood risk, (2) reasons for the change in the flood regime, (3) expected changes of the flood regime given climate and land use changes, and (4) recommendations from previous analysis for reducing the flood risk in the NRB. The question examining the features of change in the flood regime is answered by means of statistical analysis. Trend, correlation, changepoint, and variance analyses show that, in addition to the factors exposure and vulnerability, the hazard itself has also increased significantly in the NRB, in accordance with the decadal climate pattern of West Africa. The northern arid and semi-arid parts of the NRB are those most affected by the changes. As potential reasons for the increase in flood magnitudes, climate and land use changes are attributed by means of a hypothesis-testing framework. Two different approaches, based on either data analysis or simulation, lead to similar results, showing that the influence of climatic changes is generally larger compared to that of land use changes. Only in the dry areas of the NRB is the influence of land use changes comparable to that of climatic alterations. Future changes of the flood regime are evaluated using modelling results. First ensembles of statistically and dynamically downscaled climate models based on different emission scenarios are analyzed. The models agree with a distinct increase in temperature. The precipitation signal, however, is not coherent. The climate scenarios are used to drive an eco-hydrological model. The influence of climatic changes on the flood regime is uncertain due to the unclear precipitation signal. Still, in general, higher flood peaks are expected. In a next step, effects of land use changes are integrated into the model. Different scenarios show that regreening might help to reduce flood peaks. In contrast, an expansion of agriculture might enhance the flood peaks in the NRB. Similarly to the analysis of observed changes in the flood regime, the impacts of climate- and land use changes for the future scenarios are also most severe in the dry areas of the NRB. In order to answer the final research question, the results of the above analysis are integrated into a range of recommendations for science and policy on how to reduce flood risk in the NRB. The main recommendations include a stronger consideration of the enormous natural climate variability in the NRB and a focus on so called "no-regret" adaptation strategies which account for high uncertainty, as well as a stronger consideration of regional differences. Regarding the prevention and mitigation of catastrophic flooding, the most vulnerable and sensitive areas in the basin, the arid and semi-arid Sahelian and Sudano-Sahelian regions, should be prioritized. Eventually, an active, science-based and science-guided flood policy is recommended. The enormous population growth in the NRB in connection with the expected deterioration of environmental and climatic conditions is likely to enhance the region´s vulnerability to flooding. A smart and sustainable flood policy can help mitigate these negative impacts of flooding on the development of riverine societies in West Africa.}, language = {en} } @article{AichLierschVetteretal.2014, author = {Aich, Valentin and Liersch, Stefan and Vetter, T. and Huang, S. and Tecklenburg, J. and Hoffmann, P. and Koch, H. and Fournet, S. and Krysanova, Valentina and Mueller, N. and Hattermann, Fred}, title = {Comparing impacts of climate change on streamflow in four large African river basins}, series = {Hydrology and earth system sciences : HESS}, volume = {18}, journal = {Hydrology and earth system sciences : HESS}, number = {4}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1027-5606}, doi = {10.5194/hess-18-1305-2014}, pages = {1305 -- 1321}, year = {2014}, abstract = {This study aims to compare impacts of climate change on streamflow in four large representative African river basins: the Niger, the Upper Blue Nile, the Oubangui and the Limpopo. We set up the eco-hydrological model SWIM (Soil and Water Integrated Model) for all four basins individually. The validation of the models for four basins shows results from adequate to very good, depending on the quality and availability of input and calibration data. For the climate impact assessment, we drive the model with outputs of five bias corrected Earth system models of Coupled Model Intercomparison Project Phase 5 (CMIP5) for the representative concentration pathways (RCPs) 2.6 and 8.5. This climate input is put into the context of climate trends of the whole African continent and compared to a CMIP5 ensemble of 19 models in order to test their representativeness. Subsequently, we compare the trends in mean discharges, seasonality and hydrological extremes in the 21st century. The uncertainty of results for all basins is high. Still, climate change impact is clearly visible for mean discharges but also for extremes in high and low flows. The uncertainty of the projections is the lowest in the Upper Blue Nile, where an increase in streamflow is most likely. In the Niger and the Limpopo basins, the magnitude of trends in both directions is high and has a wide range of uncertainty. In the Oubangui, impacts are the least significant. Our results confirm partly the findings of previous continental impact analyses for Africa. However, contradictory to these studies we find a tendency for increased streamflows in three of the four basins (not for the Oubangui). Guided by these results, we argue for attention to the possible risks of increasing high flows in the face of the dominant water scarcity in Africa. In conclusion, the study shows that impact intercomparisons have added value to the adaptation discussion and may be used for setting up adaptation plans in the context of a holistic approach.}, language = {en} } @article{AichLierschVetteretal.2015, author = {Aich, Valentin and Liersch, Stefan and Vetter, Tobias and Andersson, Jafet C. M. and M{\"u}ller, Eva Nora and Hattermann, Fred}, title = {Climate or Land Use?}, series = {Water}, volume = {7}, journal = {Water}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {2073-4441}, doi = {10.3390/w7062796}, pages = {2796 -- 2820}, year = {2015}, abstract = {This study intends to contribute to the ongoing discussion on whether land use and land cover changes (LULC) or climate trends have the major influence on the observed increase of flood magnitudes in the Sahel. A simulation-based approach is used for attributing the observed trends to the postulated drivers. For this purpose, the ecohydrological model SWIM (Soil and Water Integrated Model) with a new, dynamic LULC module was set up for the Sahelian part of the Niger River until Niamey, including the main tributaries Sirba and Goroul. The model was driven with observed, reanalyzed climate and LULC data for the years 1950-2009. In order to quantify the shares of influence, one simulation was carried out with constant land cover as of 1950, and one including LULC. As quantitative measure, the gradients of the simulated trends were compared to the observed trend. The modeling studies showed that for the Sirba River only the simulation which included LULC was able to reproduce the observed trend. The simulation without LULC showed a positive trend for flood magnitudes, but underestimated the trend significantly. For the Goroul River and the local flood of the Niger River at Niamey, the simulations were only partly able to reproduce the observed trend. In conclusion, the new LULC module enabled some first quantitative insights into the relative influence of LULC and climatic changes. For the Sirba catchment, the results imply that LULC and climatic changes contribute in roughly equal shares to the observed increase in flooding. For the other parts of the subcatchment, the results are less clear but show, that climatic changes and LULC are drivers for the flood increase; however their shares cannot be quantified. Based on these modeling results, we argue for a two-pillar adaptation strategy to reduce current and future flood risk: Flood mitigation for reducing LULC-induced flood increase, and flood adaptation for a general reduction of flood vulnerability.}, language = {en} } @misc{AichLierschVetteretal.2017, author = {Aich, Valentin and Liersch, Stefan and Vetter, Tobias and Andersson, Jafet C. M. and M{\"u}ller, Eva Nora and Hattermann, Fred}, title = {Climate or land use?}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400115}, pages = {25}, year = {2017}, abstract = {This study intends to contribute to the ongoing discussion on whether land use and land cover changes (LULC) or climate trends have the major influence on the observed increase of flood magnitudes in the Sahel. A simulation-based approach is used for attributing the observed trends to the postulated drivers. For this purpose, the ecohydrological model SWIM (Soil and Water Integrated Model) with a new, dynamic LULC module was set up for the Sahelian part of the Niger River until Niamey, including the main tributaries Sirba and Goroul. The model was driven with observed, reanalyzed climate and LULC data for the years 1950-2009. In order to quantify the shares of influence, one simulation was carried out with constant land cover as of 1950, and one including LULC. As quantitative measure, the gradients of the simulated trends were compared to the observed trend. The modeling studies showed that for the Sirba River only the simulation which included LULC was able to reproduce the observed trend. The simulation without LULC showed a positive trend for flood magnitudes, but underestimated the trend significantly. For the Goroul River and the local flood of the Niger River at Niamey, the simulations were only partly able to reproduce the observed trend. In conclusion, the new LULC module enabled some first quantitative insights into the relative influence of LULC and climatic changes. For the Sirba catchment, the results imply that LULC and climatic changes contribute in roughly equal shares to the observed increase in flooding. For the other parts of the subcatchment, the results are less clear but show, that climatic changes and LULC are drivers for the flood increase; however their shares cannot be quantified. Based on these modeling results, we argue for a two-pillar adaptation strategy to reduce current and future flood risk: Flood mitigation for reducing LULC-induced flood increase, and flood adaptation for a general reduction of flood vulnerability.}, language = {en} } @article{AichZimmermannElsenbeer2014, author = {Aich, Valentin and Zimmermann, Alexander and Elsenbeer, Helmut}, title = {Quantification and interpretation of suspended-sediment discharge hysteresis patterns: How much data do we need?}, series = {Catena : an interdisciplinary journal of soil science, hydrology, geomorphology focusing on geoecology and landscape evolution}, volume = {122}, journal = {Catena : an interdisciplinary journal of soil science, hydrology, geomorphology focusing on geoecology and landscape evolution}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0341-8162}, doi = {10.1016/j.catena.2014.06.020}, pages = {120 -- 129}, year = {2014}, abstract = {Sediment-discharge hysteresis loops are frequently analyzed to facilitate the understanding of sediment transport processes. Hysteresis patterns, however, are often complex and their interpretation can be complicated. Particularly, quantifying hysteresis patterns remains a problematic issue. Moreover, it is currently unknown how much data is required for analyzing sediment-discharge hysteresis loops in a given area. These open questions and challenges motivated us to develop a new method for quantifying suspended-sediment hysteresis. Subsequently, we applied the new hysteresis index to three suspended-sediment and discharge datasets from a small tropical rainforest catchment. The datasets comprised a different number of events and sampling sites. Our analyses show three main findings: (1) datasets restricted to only few events, which is typical for rapid assessment surveys, were always sufficient to identify the dominating hysteresis pattern in our research area. Furthermore, some of these small datasets contained multiple-peak events that allowed identifying intra-event exhaustion effects and hence, limitations in sediment supply. (2) Datasets comprising complete hydrological years were particularly useful for analyzing seasonal dynamics of hysteresis. These analyses revealed an exhaustion of hysteresis on the inter-event scale which also points to a limited sediment supply. (3) Datasets comprising measurements from two consecutive gauges installed at the catchment outlet and on a slope within that catchment allowed analyzing the change of hysteresis patterns along the flowpath. On the slope, multiple-peak events showed a stronger intra-event exhaustion of hysteresis than at the catchment outlet. Furthermore, exhaustion of hysteresis on the inter-event scale was not evident on the slope but occurred at the catchment outlet. Our results indicate that even small sediment datasets can provide valuable insights into sediment transport processes of small catchments. Furthermore, our results may serve as a first guideline on what to expect from an analysis of hysteresis patterns for datasets of varying quality and quantity. (c) 2014 Elsevier B.V. All rights reserved.}, language = {en} } @phdthesis{Aichner2009, author = {Aichner, Bernhard}, title = {Aquatic macrophyte-derived biomarkers as palaeolimnological proxies on the Tibetan Plateau}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-42095}, school = {Universit{\"a}t Potsdam}, year = {2009}, abstract = {The Tibetan Plateau is the largest elevated landmass in the world and profoundly influences atmospheric circulation patterns such as the Asian monsoon system. Therefore this area has been increasingly in focus of palaeoenvironmental studies. This thesis evaluates the applicability of organic biomarkers for palaeolimnological purposes on the Tibetan Plateau with a focus on aquatic macrophyte-derived biomarkers. Submerged aquatic macrophytes have to be considered to significantly influence the sediment organic matter due to their high abundance in many Tibetan lakes. They can show highly 13C-enriched biomass because of their carbon metabolism and it is therefore crucial for the interpretation of δ13C values in sediment cores to understand to which extent aquatic macrophytes contribute to the isotopic signal of the sediments in Tibetan lakes and in which way variations can be explained in a palaeolimnological context. Additionally, the high abundance of macrophytes makes them interesting as potential recorders of lake water δD. Hydrogen isotope analysis of biomarkers is a rapidly evolving field to reconstruct past hydrological conditions and therefore of special relevance on the Tibetan Plateau due to the direct linkage between variations of monsoon intensity and changes in regional precipitation / evaporation balances. A set of surface sediment and aquatic macrophyte samples from the central and eastern Tibetan Plateau was analysed for composition as well as carbon and hydrogen isotopes of n-alkanes. It was shown how variable δ13C values of bulk organic matter and leaf lipids can be in submerged macrophytes even of a single species and how strongly these parameters are affected by them in corresponding sediments. The estimated contribution of the macrophytes by means of a binary isotopic model was calculated to be up to 60\% (mean: 40\%) to total organic carbon and up to 100\% (mean: 66\%) to mid-chain n-alkanes. Hydrogen isotopes of n-alkanes turned out to record δD of meteoric water of the summer precipitation. The apparent enrichment factor between water and n-alkanes was in range of previously reported ones (≈-130 per mille) at the most humid sites, but smaller (average: -86 per mille) at sites with a negative moisture budget. This indicates an influence of evaporation and evapotranspiration on δD of source water for aquatic and terrestrial plants. The offset between δD of mid- and long-chain n-alkanes was close to zero in most of the samples, suggesting that lake water as well as soil and leaf water are affected to a similar extent by those effects. To apply biomarkers in a palaeolimnological context, the aliphatic biomarker fraction of a sediment core from Lake Koucha (34.0° N; 97.2° E; eastern Tibetan Plateau) was analysed for concentrations, δ13C and δD values of compounds. Before ca. 8 cal ka BP, the lake was dominated by aquatic macrophyte-derived mid-chain n-alkanes, while after 6 cal ka BP high concentrations of a C20 highly branched isoprenoid compound indicate a predominance of phytoplankton. Those two principally different states of the lake were linked by a transition period with high abundances of microbial biomarkers. δ13C values were relatively constant for long-chain n-alkanes, while mid-chain n-alkanes showed variations between -23.5 to -12.6 per mille. Highest values were observed for the assumed period of maximum macrophyte growth during the late glacial and for the phytoplankton maximum during the middle and late Holocene. Therefore, the enriched values were interpreted to be caused by carbon limitation which in turn was induced by high macrophyte and primary productivity, respectively. Hydrogen isotope signatures of mid-chain n-alkanes have been shown to be able to track a previously deduced episode of reduced moisture availability between ca. 10 and 7 cal ka BP, indicated by a 20 per mille shift towards higher δD values. Indications for cooler episodes at 6.0, 3.1 and 1.8 cal ka BP were gained from drops of biomarker concentrations, especially microbial-derived hopanoids, and from coincidental shifts towards lower δ13C values. Those episodes correspond well with cool events reported from other locations on the Tibetan Plateau as well as in the Northern Hemisphere. To conclude, the study of recent sediments and plants improved the understanding of factors affecting the composition and isotopic signatures of aliphatic biomarkers in sediments. Concentrations and isotopic signatures of the biomarkers in Lake Koucha could be interpreted in a palaeolimnological context and contribute to the knowledge about the history of the lake. Aquatic macrophyte-derived mid-chain n-alkanes were especially useful, due to their high abundance in many Tibetan Lakes and their ability to record major changes of lake productivity and palaeo-hydrological conditions. Therefore, they have the potential to contribute to a fuller understanding of past climate variability in this key region for atmospheric circulation systems.}, language = {en} } @article{AichnerBussianLehnikHabrinketal.2015, author = {Aichner, Bernhard and Bussian, Bernd M. and Lehnik-Habrink, Petra and Hein, Sebastian}, title = {Regionalized concentrations and fingerprints of polycyclic aromatic hydrocarbons (PAHs) in German forest soils}, series = {Environmental pollution}, volume = {203}, journal = {Environmental pollution}, publisher = {Elsevier}, address = {Oxford}, issn = {0269-7491}, doi = {10.1016/j.envpol.2015.03.026}, pages = {31 -- 39}, year = {2015}, abstract = {Samples of 474 forest stands in Germany were analysed for concentrations of polycyclic aromatic hydrocarbons (PAHs) in three sampling depths. Enhanced concentrations were mainly found at spots relatively close to densely industrialized and urbanized regions and at some topographically elevated areas. Average enrichment factors between mineral soil and humic layer depend on humus type i.e. decrease from mull via moder to more Based on their compound-patterns, the observed samples could be assigned to three main clusters. For some parts of our study area a uniform assignment of samples to clusters over larger regions could be identified. For instance, samples taken at vicinity to brown-coal strip-mining districts are characterized by high relative abundances of low-molecular-weight PAHs. These results suggest that PAHs are more likely originated from local and regional emitters rather than from long-range transport and that specific source-regions can be identified based on PAH fingerprints. (C) 2015 Elsevier Ltd. All rights reserved.}, language = {en} } @article{AichnerFeakinsLeeetal.2015, author = {Aichner, Bernhard and Feakins, Sarah J. and Lee, J. E. and Herzschuh, Ulrike and Liu, X.}, title = {High-resolution leaf wax carbon and hydrogen isotopic record of the late Holocene paleoclimate in arid Central Asia}, series = {Climate of the past : an interactive open access journal of the European Geosciences Union}, volume = {11}, journal = {Climate of the past : an interactive open access journal of the European Geosciences Union}, number = {4}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1814-9324}, doi = {10.5194/cp-11-619-2015}, pages = {619 -- 633}, year = {2015}, abstract = {Central Asia is located at the confluence of large-scale atmospheric circulation systems. It is thus likely to be highly susceptible to changes in the dynamics of those systems; however, little is still known about the regional paleoclimate history. Here we present carbon and hydrogen isotopic compositions of n-alkanoic acids from a late Holocene sediment core from Lake Karakuli (eastern Pamir, Xinjiang Province, China). Instrumental evidence and isotopeenabled climate model experiments with the Laboratoire de Meteorologie Dynamique Zoom model version 4 (LMDZ4) demonstrate that delta D values of precipitation in the region are influenced by both temperature and precipitation amount. We find that these parameters are inversely correlated on an annual scale, i.e., the climate has varied between relatively cool and wet and more warm and dry over the last 50 years. Since the isotopic signals of these changes are in the same direction and therefore additive, isotopes in precipitation are sensitive recorders of climatic changes in the region. Additionally, we infer that plants use year-round precipitation (including snowmelt), and thus leaf wax delta D values must also respond to shifts in the proportion of moisture derived from westerly storms during late winter and early spring. Downcore results give evidence for a gradual shift to cooler and wetter climates between 3.5 and 2.5 cal kyr BP, interrupted by a warm and dry episode between 3.0 and 2.7 kyr BP. Further cool and wet episodes occur between 1.9 and 1.5 and between 0.6 and 0.1 kyr BP, the latter coeval with the Little Ice Age. Warm and dry episodes from 2.5 to 1.9 and 1.5 to 0.6 kyr BP coincide with the Roman Warm Period and Medieval Climate Anomaly, respectively. Finally, we find a drying tend in recent decades. Regional comparisons lead us to infer that the strength and position of the westerlies, and wider northern hemispheric climate dynamics, control climatic shifts in arid Central Asia, leading to complex local responses. Our new archive from Lake Karakuli provides a detailed record of the local signatures of these climate transitions in the eastern Pamir.}, language = {en} } @article{AichnerHerzschuhWilkesetal.2012, author = {Aichner, Bernhard and Herzschuh, Ulrike and Wilkes, Heinz and Schulz, Hans-Martin and Wang, Yongbo and Plessen, Birgit and Mischke, Steffen and Diekmann, Bernhard and Zhang, Chengjun}, title = {Ecological development of Lake Donggi Cona, north-eastern Tibetan Plateau, since the late glacial on basis of organic geochemical proxies and non-pollen palynomorphs}, series = {Palaeogeography, palaeoclimatology, palaeoecology : an international journal for the geo-sciences}, volume = {313}, journal = {Palaeogeography, palaeoclimatology, palaeoecology : an international journal for the geo-sciences}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0031-0182}, doi = {10.1016/j.palaeo.2011.10.015}, pages = {140 -- 149}, year = {2012}, abstract = {Organic geochemical proxy data from surface sediment samples and a sediment core from Lake Donggi Cona were used to infer environmental changes on the northeastern Tibetan Plateau spanning the last 18.4 kyr. Long-chain n-alkanes dominate the aliphatic hydrocarbon fraction of the sediment extract from most surface sediment samples and the sediment core. Unsaturated mid-chain n-alkanes (nC(23:1) and nC(25:1)) have high abundances in some samples, especially in core samples from the late glacial and early Holocene. TOC contents, organic biomarker and non-pollen-palynomorph concentrations and results from organic petrologic analysis on selected samples suggest three major episodes in the history of Lake Donggi Cona. Before ca. 12.6 cal ka BP samples contain low amounts of organic matter due to cold and arid conditions during the late glacial. After 12.6 cal ka BP, relatively high contents of TOC and concentrations of Botryococcus fossils, as well as enhanced concentrations of mid-chain n-alkanes and n-alkenes suggest a higher primary and macrophyte productivity than at present This is supported by high contents of palynomorphs derived from higher plants and algae and was possibly triggered by a decrease of salinity and amelioration of climate during the early Holocene. Since 6.8 cal ka BP Lake Donggi Cona has been an oligotrophic freshwater lake. Proxy data suggest that variations in insolation drive ecological changes in the lake, with increased aquatic productivity during the early Holocene summer insolation maximum. Short-term drops of TOC contents or biomarker concentrations (at 9.9 cal ka BP, after 8.0 and between 3.5 and 1.7 cal ka BP) can possibly be related to relatively cool and dry episodes reported from other sites on the north-eastern Tibetan Plateau, which are hypothesized to occur in phase with Northern Hemisphere cooling events.}, language = {en} } @article{AichnerHiltPerillonetal.2017, author = {Aichner, Bernhard and Hilt, Sabine and Perillon, Cecile and Gillefalk, Mikael and Sachse, Dirk}, title = {Biosynthetic hydrogen isotopic fractionation factors during lipid synthesis in submerged aquatic macrophytes: Effect of groundwater discharge and salinity}, series = {Organic geochemistry : the international journal for rapid publication of current research in organic geochemistry and biochemistry}, volume = {113}, journal = {Organic geochemistry : the international journal for rapid publication of current research in organic geochemistry and biochemistry}, publisher = {Elsevier}, address = {Oxford}, issn = {0146-6380}, doi = {10.1016/j.orggeochem.2017.07.021}, pages = {10 -- 16}, year = {2017}, abstract = {Sedimentary lipid biomarkers have become widely used tools for reconstructing past climatic and ecological changes due to their ubiquitous occurrence in lake sediments. In particular, the hydrogen isotopic composition (expressed as delta D values) of leaf wax lipids derived from terrestrial plants has been a focus of research during the last two decades and the understanding of competing environmental and plant physiological factors influencing the delta D values has greatly improved. Comparatively less attention has been paid to lipid biomarkers derived from aquatic plants, although these compounds are abundant in many lacustrine sediments. We therefore conducted a field and laboratory experiment to study the effect of salinity and groundwater discharge on the isotopic composition of aquatic plant biomarkers. We analyzed samples of the common submerged plant species, Potamogeton pectinatus (sago pondweed), which has a wide geographic distribution and can tolerate high salinity. We tested the effect of groundwater discharge (characterized by more negative delta D values relative to lake water) and salinity on the delta D values of n-alkanes from P. pectinatus by comparing plants (i) collected from the oligotrophic freshwater Lake Stechlin (Germany) at shallow littoral depth from locations with and without groundwater discharge, and (ii) plants grown from tubers collected from the eutrophic Lake Muggelsee in nutrient solution at four salinity levels. Isotopically depleted groundwater did not have a significant influence on the delta D values of n-alkanes in Lake Stechlin P. pectinatus and calculated isotopic fractionation factors epsilon(l/w) between lake water and n-alkanes averaged -137 +/- 9\%(n-C-23), -136 +/- 7\%(n-C-25) and -131 +/- 6\%(n-C-27), respectively. Similar epsilon values were calculated for plants from Lake Muggelsee grown in freshwater nutrient solution (-134 +/- 11\% for n-C-23), while greater fractionation was observed at increased salinity values of 10 (163 +/- 12\%) and 15(-172 +/- 15\%). We therefore suggest an average e value of -136 +/- 9\% between source water and the major n-alkanes in P. pectinatus grown under freshwater conditions. Our results demonstrate that isotopic fractionation can increase by 30-40\% at salinity values 10 and 15. These results could be explained either by inhibited plant growth at higher salinity, or by metabolic adaptation to salt stress that remain to be elucidated. A potential salinity effect on dD values of aquatic lipids requires further examination, since this would impact on the interpretation of downcore isotopic data in paleohydrologic studies. (C) 2017 Elsevier Ltd. All rights reserved.}, language = {en} } @article{AichnerMakhmudovRajabovetal.2019, author = {Aichner, Bernhard and Makhmudov, Zafar and Rajabov, Iljomjon and Zhang, Qiong and Pausata, Francesco Salvatore R. and Werner, Martin and Heinecke, Liv and Kuessner, Marie L. and Feakins, Sarah J. and Sachse, Dirk and Mischke, Steffen}, title = {Hydroclimate in the Pamirs Was Driven by Changes in Precipitation-Evaporation Seasonality Since theLast Glacial Period}, series = {Geophysical research letters}, volume = {46}, journal = {Geophysical research letters}, number = {23}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1029/2019GL085202}, pages = {13972 -- 13983}, year = {2019}, abstract = {The Central Asian Pamir Mountains (Pamirs) are a high-altitude region sensitive to climatic change, with only few paleoclimatic records available. To examine the glacial-interglacial hydrological changes in the region, we analyzed the geochemical parameters of a 31-kyr record from Lake Karakul and performed a set of experiments with climate models to interpret the results. delta D values of terrestrial biomarkers showed insolation-driven trends reflecting major shifts of water vapor sources. For aquatic biomarkers, positive delta D shifts driven by changes in precipitation seasonality were observed at ca. 31-30, 28-26, and 17-14 kyr BP. Multiproxy paleoecological data and modelling results suggest that increased water availability, induced by decreased summer evaporation, triggered higher lake levels during those episodes, possibly synchronous to northern hemispheric rapid climate events. We conclude that seasonal changes in precipitation-evaporation balance significantly influenced the hydrological state of a large waterbody such as Lake Karakul, while annual precipitation amount and inflows remained fairly constant.}, language = {en} } @article{AikenAikenCotton2018, author = {Aiken, John M. and Aiken, Chastity and Cotton, Fabrice}, title = {A python library for teaching computation to seismology students}, series = {Seismological research letters}, volume = {89}, journal = {Seismological research letters}, number = {3}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0895-0695}, doi = {10.1785/0220170246}, pages = {1165 -- 1171}, year = {2018}, abstract = {Python is at the forefront of scientific computation for seismologists and therefore should be introduced to students interested in becoming seismologists. On its own, Python is open source and well designed with extensive libraries. However, Python code can also be executed, visualized, and communicated to others with "Jupyter Notebooks". Thus, Jupyter Notebooks are ideal for teaching students Python and scientific computation. In this article, we designed an openly available Python library and collection of Jupyter Notebooks based on defined scientific computation learning goals for seismology students. The Notebooks cover topics from an introduction to Python to organizing data, earthquake catalog statistics, linear regression, and making maps. Our Python library and collection of Jupyter Notebooks are meant to be used as course materials for an upper-division data analysis course in an Earth Science Department, and the materials were tested in a Probabilistic Seismic Hazard course. However, seismologists or anyone else who is interested in Python for data analysis and map making can use these materials.}, language = {en} } @article{AkalKoralayCandanetal.2011, author = {Akal, Cuneyt and Koralay, O. Ersin and Candan, Osman and Oberh{\"a}nsli, Roland and Chen, Fukun}, title = {Geodynamic significance of the early triassic karaburun granitoid (Western Turkey) for the opening history of Neo-Tethys}, series = {Turkish journal of earth sciences = T{\"u}rk yerbilimleri dergisi}, volume = {20}, journal = {Turkish journal of earth sciences = T{\"u}rk yerbilimleri dergisi}, number = {3}, publisher = {T{\"u}bitak}, address = {Ankara}, issn = {1300-0985}, doi = {10.3906/yer-1008-1}, pages = {255 -- 271}, year = {2011}, abstract = {The Karaburun Peninsula, which is considered part of the Anatolide-Tauride Block of Turkey, contains clastic and carbonate sequences deposited on the northern margin of Gondwana. The Palaeozoic clastic sequence, which is intruded by the Early Triassic granitoid and tectonically overlies a Mesozoic melange sequence, can be divided into three subunits: a lower clastic subunit consisting of a sandstone-shale alternation, an upper clastic subunit consisting of black chert-bearing shales, sandstone and conglomerate, and a Permo-Carboniferous carbonate subunit. The lower Triassic Karaburun I-type granitoid has a high initial Sr-87/Sr-86 ratio (0.709021-0.709168), and low Nd-143/Nd-144 ratio (0.512004-0.512023) and epsilon Nd (-5.34 to -5.70) isotopic values. Geochronological data indicate a crystallization (intrusion) age of 247.1 +/- 2.0 Ma (Scythian). Geochemically, the acidic magmatism reflects a subduction-related continental-arc basin tectonic setting, which can be linked to the opening of the northern branch of Neo-Tethys as a continental back-arc rifting basin on the northern margin of Gondwana. This can be related to the closure through southward subduction of the Palaeotethys Ocean beneath Gondwana.}, language = {en} } @article{AkalCandanKoralayetal.2012, author = {Akal, C{\"u}neyt and Candan, Osman and Koralay, O. Ersin and Oberh{\"a}nsli, Roland and Chen, Fukun and Prelevic, Dejan}, title = {Early Triassic potassic volcanism in the Afyon Zone of the Anatolides/Turkey - implications for the rifting of the Neo-Tethys}, series = {International journal of earth sciences}, volume = {101}, journal = {International journal of earth sciences}, number = {1}, publisher = {Springer}, address = {New York}, issn = {1437-3254}, doi = {10.1007/s00531-011-0654-2}, pages = {177 -- 194}, year = {2012}, abstract = {Afyon Zone, which was derived from the Anatolide-Tauride platform during closure of the Neo-Tethys, is made up of pre-Mesozoic basement and unconformably overlying Triassic-Early Tertiary cover series. The Afyon Zone contains widespread metavolcanic rocks, which are dominated by rhyolite, dacite, and trachyandesite. They form a distinct volcanic succession, which is separated from the underlying Silurian-Lower Carboniferous metacarbonates and meta-siliciclastics by a regional unconformity. Trachyandesitic metavolcanics are made up of massive lava flows, pyroclastics and epiclastics, less frequently, domes and dikes, which were developed on a deeply eroded subaerial landmass. U/Pb and Pb/Pb zircon geochronology yielded Lower Triassic (similar to 250 Ma) ages, which are interpreted as extrusion age of trachyandesitic volcanics. Based on the stratigraphic, geochronological, and geochemical data, we suggest that these Lower Triassic magmatic rocks represent an extensional tectonic setting on the northern active margin of the Gondwana, which led to the development of the northern branch of the Neo-Tethys.}, language = {en} } @article{AlAtikAbrahamsonBommeretal.2010, author = {Al Atik, Linda and Abrahamson, Norman A. and Bommer, Julian J. and Scherbaum, Frank and Cotton, Fabrice and Kuehn, Nicolas}, title = {The variability of ground-motion prediction models and its components}, issn = {0895-0695}, doi = {10.1785/gssrl.81.5.794}, year = {2010}, language = {en} } @phdthesis{AlHalbouni2019, author = {Al-Halbouni, Djamil}, title = {Photogrammetry and distinct element geomechanical modelling of sinkholes and large-scale karstic depressions}, doi = {10.25932/publishup-43215}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432159}, school = {Universit{\"a}t Potsdam}, pages = {137}, year = {2019}, abstract = {Sinkholes and depressions are typical landforms of karst regions. They pose a considerable natural hazard to infrastructure, agriculture, economy and human life in affected areas worldwide. The physio-chemical processes of sinkholes and depression formation are manifold, ranging from dissolution and material erosion in the subsurface to mechanical subsidence/failure of the overburden. This thesis addresses the mechanisms leading to the development of sinkholes and depressions by using complementary methods: remote sensing, distinct element modelling and near-surface geophysics. In the first part, detailed information about the (hydro)-geological background, ground structures, morphologies and spatio-temporal development of sinkholes and depressions at a very active karst area at the Dead Sea are derived from satellite image analysis, photogrammetry and geologic field surveys. There, clusters of an increasing number of sinkholes have been developing since the 1980s within large-scale depressions and are distributed over different kinds of surface materials: clayey mud, sandy-gravel alluvium and lacustrine evaporites (salt). The morphology of sinkholes differs depending in which material they form: Sinkholes in sandy-gravel alluvium and salt are generally deeper and narrower than sinkholes in the interbedded evaporite and mud deposits. From repeated aerial surveys, collapse precursory features like small-scale subsidence, individual holes and cracks are identified in all materials. The analysis sheds light on the ongoing hazardous subsidence process, which is driven by the base-level fall of the Dead Sea and by the dynamic formation of subsurface water channels. In the second part of this thesis, a novel, 2D distinct element geomechanical modelling approach with the software PFC2D-V5 to simulating individual and multiple cavity growth and sinkhole and large-scale depression development is presented. The approach involves a stepwise material removal technique in void spaces of arbitrarily shaped geometries and is benchmarked by analytical and boundary element method solutions for circular cavities. Simulated compression and tension tests are used to calibrate model parameters with bulk rock properties for the materials of the field site. The simulations show that cavity and sinkhole evolution is controlled by material strength of both overburden and cavity host material, the depth and relative speed of the cavity growth and the developed stress pattern in the subsurface. Major findings are: (1) A progressively deepening differential subrosion with variable growth speed yields a more fragmented stress pattern with stress interaction between the cavities. It favours multiple sinkhole collapses and nesting within large-scale depressions. (2) Low-strength materials do not support large cavities in the material removal zone, and subsidence is mainly characterised by gradual sagging into the material removal zone with synclinal bending. (3) High-strength materials support large cavity formation, leading to sinkhole formation by sudden collapse of the overburden. (4) Large-scale depression formation happens either by coalescence of collapsing holes, block-wise brittle failure, or gradual sagging and lateral widening. The distinct element based approach is compared to results from remote sensing and geophysics at the field site. The numerical simulation outcomes are generally in good agreement with derived morphometrics, documented surface and subsurface structures as well as seismic velocities. Complementary findings on the subrosion process are provided from electric and seismic measurements in the area. Based on the novel combination of methods in this thesis, a generic model of karst landform evolution with focus on sinkhole and depression formation is developed. A deepening subrosion system related to preferential flow paths evolves and creates void spaces and subsurface conduits. This subsequently leads to hazardous subsidence, and the formation of sinkholes within large-scale depressions. Finally, a monitoring system for shallow natural hazard phenomena consisting of geodetic and geophysical observations is proposed for similarly affected areas.}, language = {en} } @misc{AlHalbouniHolohanTaherietal.2018, author = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Sch{\"o}pfer, Martin P. J. and Emam, Sacha and Dahm, Torsten}, title = {Geomechanical modelling of sinkhole development using distinct elements}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1061}, issn = {1866-8372}, doi = {10.25932/publishup-46843}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-468435}, pages = {35}, year = {2018}, abstract = {Mechanical and/or chemical removal of material from the subsurface may generate large subsurface cavities, the destabilisation of which can lead to ground collapse and the formation of sinkholes. Numerical simulation of the interaction of cavity growth, host material deformation and overburden collapse is desirable to better understand the sinkhole hazard but is a challenging task due to the involved high strains and material discontinuities. Here, we present 2-D distinct element method numerical simulations of cavity growth and sinkhole development. Firstly, we simulate cavity formation by quasi-static, stepwise removal of material in a single growing zone of an arbitrary geometry and depth. We benchmark this approach against analytical and boundary element method models of a deep void space in a linear elastic material. Secondly, we explore the effects of properties of different uniform materials on cavity stability and sinkhole development. We perform simulated biaxial tests to calibrate macroscopic geotechnical parameters of three model materials representative of those in which sinkholes develop at the Dead Sea shoreline: mud, alluvium and salt. We show that weak materials do not support large cavities, leading to gradual sagging or suffusion-style subsidence. Strong materials support quasi-stable to stable cavities, the overburdens of which may fail suddenly in a caprock or bedrock collapse style. Thirdly, we examine the consequences of layered arrangements of weak and strong materials. We find that these are more susceptible to sinkhole collapse than uniform materials not only due to a lower integrated strength of the overburden but also due to an inhibition of stabilising stress arching. Finally, we compare our model sinkhole geometries to observations at the Ghor Al-Haditha sinkhole site in Jordan. Sinkhole depth ∕ diameter ratios of 0.15 in mud, 0.37 in alluvium and 0.33 in salt are reproduced successfully in the calibrated model materials. The model results suggest that the observed distribution of sinkhole depth ∕ diameter values in each material type may partly reflect sinkhole growth trends.}, language = {en} } @article{AlHalbouniHolohanTaherietal.2018, author = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Sch{\"o}pfer, Martin P. J. and Emam, Sacha and Dahm, Torsten}, title = {Geomechanical modelling of sinkhole development using distinct elements}, series = {Solid earth}, volume = {9}, journal = {Solid earth}, number = {6}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-9-1341-2018}, pages = {1341 -- 1373}, year = {2018}, abstract = {Mechanical and/or chemical removal of material from the subsurface may generate large subsurface cavities, the destabilisation of which can lead to ground collapse and the formation of sinkholes. Numerical simulation of the interaction of cavity growth, host material deformation and overburden collapse is desirable to better understand the sinkhole hazard but is a challenging task due to the involved high strains and material discontinuities. Here, we present 2-D distinct element method numerical simulations of cavity growth and sinkhole development. Firstly, we simulate cavity formation by quasi-static, stepwise removal of material in a single growing zone of an arbitrary geometry and depth. We benchmark this approach against analytical and boundary element method models of a deep void space in a linear elastic material. Secondly, we explore the effects of properties of different uniform materials on cavity stability and sinkhole development. We perform simulated biaxial tests to calibrate macroscopic geotechnical parameters of three model materials representative of those in which sinkholes develop at the Dead Sea shoreline: mud, alluvium and salt. We show that weak materials do not support large cavities, leading to gradual sagging or suffusion-style subsidence. Strong materials support quasi-stable to stable cavities, the overburdens of which may fail suddenly in a caprock or bedrock collapse style. Thirdly, we examine the consequences of layered arrangements of weak and strong materials. We find that these are more susceptible to sinkhole collapse than uniform materials not only due to a lower integrated strength of the overburden but also due to an inhibition of stabilising stress arching. Finally, we compare our model sinkhole geometries to observations at the Ghor Al-Haditha sinkhole site in Jordan. Sinkhole depth / diameter ratios of 0.15 in mud, 0.37 in alluvium and 0.33 in salt are reproduced successfully in the calibrated model materials. The model results suggest that the observed distribution of sinkhole depth / diameter values in each material type may partly reflect sinkhole growth trends.}, language = {en} } @article{AlHalbouniHolohanTaherietal.2019, author = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Watson, Robert A. and Polom, Ulrich and Schoepfer, Martin P. J. and Emam, Sacha and Dahm, Torsten}, title = {Distinct element geomechanical modelling of the formation of sinkhole clusters within large-scale karstic depressions}, series = {Solid earth}, volume = {10}, journal = {Solid earth}, number = {4}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-10-1219-2019}, pages = {1219 -- 1241}, year = {2019}, abstract = {The 2-D distinct element method (DEM) code (PFC2D_V5) is used here to simulate the evolution of subsidence-related karst landforms, such as single and clustered sinkholes, and associated larger-scale depressions. Subsurface material in the DEM model is removed progressively to produce an array of cavities; this simulates a network of subsurface groundwater conduits growing by chemical/mechanical erosion. The growth of the cavity array is coupled mechanically to the gravitationally loaded surroundings, such that cavities can grow also in part by material failure at their margins, which in the limit can produce individual collapse sinkholes. Two end-member growth scenarios of the cavity array and their impact on surface subsidence were examined in the models: (1) cavity growth at the same depth level and growth rate; (2) cavity growth at progressively deepening levels with varying growth rates. These growth scenarios are characterised by differing stress patterns across the cavity array and its overburden, which are in turn an important factor for the formation of sinkholes and uvalalike depressions. For growth scenario (1), a stable compression arch is established around the entire cavity array, hindering sinkhole collapse into individual cavities and favouring block-wise, relatively even subsidence across the whole cavity array. In contrast, for growth scenario (2), the stress system is more heterogeneous, such that local stress concentrations exist around individual cavities, leading to stress interactions and local wall/overburden fractures. Consequently, sinkhole collapses occur in individual cavities, which results in uneven, differential subsidence within a larger-scale depression. Depending on material properties of the cavity-hosting material and the overburden, the larger-scale depression forms either by sinkhole coalescence or by widespread subsidence linked geometrically to the entire cavity array. The results from models with growth scenario (2) are in close agreement with surface morphological and subsurface geophysical observations from an evaporite karst area on the eastern shore of the Dead Sea.}, language = {en} } @article{AlMashaikhiOswaldAttingeretal.2012, author = {Al-Mashaikhi, K. and Oswald, Sascha and Attinger, Sabine and B{\"u}chel, G. and Kn{\"o}ller, K. and Strauch, G.}, title = {Evaluation of groundwater dynamics and quality in the Najd aquifers located in the Sultanate of Oman}, series = {Environmental earth sciences}, volume = {66}, journal = {Environmental earth sciences}, number = {4}, publisher = {Springer}, address = {New York}, issn = {1866-6280}, doi = {10.1007/s12665-011-1331-2}, pages = {1195 -- 1211}, year = {2012}, abstract = {The Najd, Oman, is located in one of the most arid environments in the world. The groundwater in this region is occurring in four different aquifers A to D of the Hadhramaut Group consisting mainly of different types of limestone and dolomite. The quality of the groundwater is dominated by the major ions sodium, calcium, magnesium, sulphate, and chloride, but the hydrochemical character is varying among the four aquifers. Mineralization within the separate aquifers increases along the groundwater flow direction from south to north-northeast up to high saline sodium-chloride water in aquifer D in the northeast area of the Najd. Environmental isotope analyses of hydrogen and oxygen were conducted to monitor the groundwater dynamics and to evaluate the recharge conditions of groundwater into the Najd aquifers. Results suggest an earlier recharge into these aquifers as well as ongoing recharge takes place in the region down to present day. Mixing of modern and submodern waters was detected by water isotopes in aquifer D in the mountain chain (Jabal) area and along the northern side of the mountain range. In addition, delta H-2 and delta O-18 variations suggest that aquifers A, B, and C are assumed to be connected by faults and fractures, and interaction between the aquifers may occur. Low tritium concentrations support the mixing assumption in the recharge area. The knowledge about the groundwater development is an important factor for the sustainable use of water resources in the Dhofar region.}, language = {en} } @article{AlawiSchneiderKallmeyer2014, author = {Alawi, Mashal and Schneider, Beate and Kallmeyer, Jens}, title = {A procedure for separate recovery of extra- and intracellular DNA from a single marine sediment sample}, series = {Journal of microbiological methods}, volume = {104}, journal = {Journal of microbiological methods}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0167-7012}, doi = {10.1016/j.mimet.2014.06.009}, pages = {36 -- 42}, year = {2014}, abstract = {Extracellular DNA (eDNA) is a ubiquitous biological compound in aquatic sediment and soil. Previous studies suggested that eDNA plays an important role in biogeochemical element cycling, horizontal gene transfer and stabilization of biofilm structures. Previous methods for eDNA extraction were either not suitable for oligotrophic sediments or only allowed quantification but no genetic analyses. Our procedure is based on cell detachment and eDNA liberation from sediment particles by sequential washing with an alkaline sodium phosphate buffer followed by a separation of cells and eDNA. The separated eDNA is then bound onto silica particles and purified, whereas the intracellular DNA from the separated cells is extracted using a commercial kit. The method provides extra- and intracellular DNA of high purity that is suitable for downstream applications like PCR. Extracellular DNA was extracted from organic-rich shallow sediment of the Baltic Sea, glacially influenced sediment of the Barents Sea and from the oligotrophic South Pacific Gyre. The eDNA concentration in these samples varied from 23 to 626 ng g(-1) wet weight sediment. A number of experiments were performed to verify each processing step. Although extraction efficiency is higher than other published methods, it is not fully quantitative. (C) 2014 Elsevier B.V. All rights reserved.}, language = {en} } @article{AlbrechtMartinHaseloffetal.2011, author = {Albrecht, Tanja and Martin, M. and Haseloff, M. and Winkelmann, Ricarda and Levermann, Anders}, title = {Parameterization for subgrid-scale motion of ice-shelf calving fronts}, series = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union}, volume = {5}, journal = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union}, number = {1}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1994-0416}, doi = {10.5194/tc-5-35-2011}, pages = {35 -- 44}, year = {2011}, abstract = {A parameterization for the motion of ice-shelf fronts on a Cartesian grid in finite-difference land-ice models is presented. The scheme prevents artificial thinning of the ice shelf at its edge, which occurs due to the finite resolution of the model. The intuitive numerical implementation diminishes numerical dispersion at the ice front and enables the application of physical boundary conditions to improve the calculation of stress and velocity fields throughout the ice-sheet-shelf system. Numerical properties of this subgrid modification are assessed in the Potsdam Parallel Ice Sheet Model (PISM-PIK) for different geometries in one and two horizontal dimensions and are verified against an analytical solution in a flow-line setup.}, language = {en} } @article{AlbrechtWinkelmannLevermann2020, author = {Albrecht, Torsten and Winkelmann, Ricarda and Levermann, Anders}, title = {Glacial-cycle simulations of the Antarctic Ice Sheet with the Parallel Ice Sheet Model (PISM)}, series = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union}, volume = {14}, journal = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union}, number = {2}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1994-0416}, doi = {10.5194/tc-14-599-2020}, pages = {599 -- 632}, year = {2020}, abstract = {Simulations of the glacial-interglacial history of the Antarctic Ice Sheet provide insights into dynamic threshold behavior and estimates of the ice sheet's contributions to global sea-level changes for the past, present and future. However, boundary conditions are weakly constrained, in particular at the interface of the ice sheet and the bedrock. Also climatic forcing covering the last glacial cycles is uncertain, as it is based on sparse proxy data.
We use the Parallel Ice Sheet Model (PISM) to investigate the dynamic effects of different choices of input data, e.g., for modern basal heat flux or reconstructions of past changes of sea level and surface temperature. As computational resources are limited, glacial-cycle simulations are performed using a comparably coarse model grid of 16 km and various parameterizations, e.g., for basal sliding, iceberg calving, or for past variations in precipitation and ocean temperatures. In this study we evaluate the model's transient sensitivity to corresponding parameter choices and to different boundary conditions over the last two glacial cycles and provide estimates of involved uncertainties. We also discuss isolated and combined effects of climate and sea-level forcing. Hence, this study serves as a "cookbook" for the growing community of PISM users and paleo-ice sheet modelers in general.
For each of the different model uncertainties with regard to climatic forcing, ice and Earth dynamics, and basal processes, we select one representative model parameter that captures relevant uncertainties and motivates corresponding parameter ranges that bound the observed ice volume at present. The four selected parameters are systematically varied in a parameter ensemble analysis, which is described in a companion paper.}, language = {en} } @article{AlbrichFrijiaParenteetal.2014, author = {Albrich, Sergi and Frijia, Gianluca and Parente, Mariano and Caus, Esmeralda}, title = {The evolution of the earliest representatives of the genus Orbitoides: Implications for Upper Cretaceous biostratigraphy}, series = {Cretaceous research}, volume = {51}, journal = {Cretaceous research}, publisher = {Elsevier}, address = {London}, issn = {0195-6671}, doi = {10.1016/j.cretres.2014.04.013}, pages = {22 -- 34}, year = {2014}, abstract = {The biostratigraphy of Campanian-Maastrichtian carbonate platforms is largely based on the larger foraminiferal genus Orbitoides. However, while the taxonomy and the chronostratigraphic age of the younger species of this genus are well established, there are still many controversies on the earliest species. We have restudied their morphological characters using a large collection of samples from the type-localities and from continuous sections in the southern Pyrenees. Based on these new observations, the long forgotten species O. sanctae-pelagiae is reinstated, while O. dordoniensis is considered a junior synonym. Successive populations of O. hottingeri, O. sanctae-pelagiae and O. douvillei show gradual morphological changes in time marked by an increase in the size and complexity of the macrospheric embryonal apparatus, an increase of the size of the adult specimens of both generations and the progressive appearance and development of true lateral chamberlets. The Font de les Bagasses Unit in the southern Pyrenees preserves a high-resolution archive of the evolution of the earliest Orbitoides. Strontium isotope stratigraphy indicates that the oldest species, O. hottingeri, made its first appearance in the earliest Campanian, close to the Santonian-Campanian boundary, and was replaced by O. sanctae-pelagiae at a level closely corresponding to the boundary between the Placenticeras bidorsatum and Menabites delawarensis ammonite zones. (C) 2014 Elsevier Ltd. All rights reserved.}, language = {en} } @article{AliGiurcoArndtetal.2017, author = {Ali, Saleem H. and Giurco, Damien and Arndt, Nicholas and Nickless, Edmund and Brown, Graham and Demetriades, Alecos and Durrheim, Ray and Enriquez, Maria Amelia and Kinnaird, Judith and Littleboy, Anna and Meinert, Lawrence D. and Oberh{\"a}nsli, Roland and Salem, Janet and Schodde, Richard and Schneider, Gabi and Vidal, Olivier and Yakovleva, Natalia}, title = {Mineral supply for sustainable development requires resource governance}, series = {Nature : the international weekly journal of science}, volume = {543}, journal = {Nature : the international weekly journal of science}, publisher = {Nature Publ. Group}, address = {London}, issn = {0028-0836}, doi = {10.1038/nature21359}, pages = {367 -- 372}, year = {2017}, abstract = {Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.}, language = {en} } @article{AlinaghiKruger2014, author = {Alinaghi, Alireza and Kruger, Frank}, title = {Seismic array analysis and redetermination of depths of earthquakes in Tien-Shan: implications for strength of the crust and lithosphere}, series = {Geophysical journal international}, volume = {198}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggu141}, pages = {1111 -- 1129}, year = {2014}, abstract = {We have redetermined focal depths of moderate and major earthquakes with reported lower-crust and upper-mantle depths that have occurred in Tien-Shan, since the availability of broad-band array data. Records of earthquakes at global arrays have been used for identification and modelling of depth phases in order to make accurate estimation of focal depths. Our results show that half of the purportedly deep earthquakes are indeed originating from depths attributable to middle-crust and lower-crust regions. Also one exceptional event in the northern foreland of Tien-Shan in Junggar Basin is located in the upper mantle at the depth of 64 km. Such unusually deep earthquakes for intraplate continental tectonic domain are all located at the margin of Tien-Shan with its adjacent stable blocks and at least some of them have occurred where the brittle behaviour of continental rocks is not highly expected. The reverse mechanisms of all these earthquakes and their proximity to formerly subducting and later colliding and underplating stable blocks and their interactions with overlying Tien-Shan are clues to explain this extremity.}, language = {en} } @phdthesis{Allroggen2015, author = {Allroggen, Niklas}, title = {Observation of subsurface flow from the surface : applications of ground-penetrating radar}, school = {Universit{\"a}t Potsdam}, pages = {67}, year = {2015}, language = {en} } @article{AllroggenBeiterTronicke2020, author = {Allroggen, Niklas and Beiter, Daniel and Tronicke, Jens}, title = {Ground-penetrating radar monitoring of fast subsurface processes}, series = {Geophysics}, volume = {85}, journal = {Geophysics}, number = {3}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2019-0737.1}, pages = {A19 -- A23}, year = {2020}, abstract = {Earth and environmental sciences rely on detailed information about subsurface processes. Whereas geophysical techniques typically provide highly resolved spatial images, monitoring subsurface processes is often associated with enormous effort and, therefore, is usually limited to point information in time or space. Thus, the development of spatial and temporal continuous field monitoring methods is a major challenge for the understanding of subsurface processes. We have developed a novel method for ground-penetrating-radar (GPR) reflection monitoring of subsurface flow processes under unsaturated conditions and applied it to a hydrological infiltration experiment performed across a periglacial slope deposit in northwest Luxembourg. Our approach relies on a spatial and temporal quasicontinuous data recording and processing, followed by an attribute analysis based on analyzing differences between individual time steps. The results demonstrate the ability of time-lapse GPR monitoring to visualize the spatial and temporal dynamics of preferential flow processes with a spatial resolution in the order of a few decimeters and temporal resolution in the order of a few minutes. We observe excellent agreement with water table information originating from different boreholes. This demonstrates the potential of surface-based GPR reflection monitoring to observe the spatiotemporal dynamics of water movements in the subsurface. It provides valuable, and so far not accessible, information for example in the field of hydrology and pedology that allows studying the actual subsurface processes rather than deducing them from point information.}, language = {en} } @article{AllroggenHeinckeKoyanetal.2022, author = {Allroggen, Niklas and Heincke, Bjorn H. and Koyan, Philipp and Wheeler, Walter and Ronning, Jan S.}, title = {3D ground-penetrating radar attribute classification}, series = {Geophysics}, volume = {87}, journal = {Geophysics}, number = {4}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2021-0651.1}, pages = {WB19 -- WB30}, year = {2022}, abstract = {Ground-penetrating radar (GPR) is a method that can provide detailed information about the near subsurface in sedimentary and carbonate environments. The classical interpretation of GPR data (e.g., based on manual feature selection) often is labor-intensive and limited by the experience of the intercally used for seismic interpretation, can provide faster, more repeatable, and less biased interpretations. We have recorded a 3D GPD data set collected across a paleokarst breccia pipe in the Billefjorden area on Spitsbergen, Svalbard. After performing advanced processing, we compare the results of a classical GPR interpretation to the results of an attribute-based classification. Our attribute classification incorporates a selection of dip and textural attributes as the input for a k-means clustering approach. Similar to the results of the classical interpretation, the resulting classes differentiate between undisturbed strata and breccias or fault zones. The classes also reveal details inside the breccia pipe that are not discerned in the classical fer that the intrapipe GPR facies result from subtle differences, such as breccia lithology, clast size, or pore-space filling.}, language = {en} } @article{AllroggenBoothBakeretal.2019, author = {Allroggen, Niklas Robin and Booth, Adam D. and Baker, Sandra E. and Ellwood, Stephen A. and Tronicke, Jens}, title = {High-resolution imaging and monitoring of animal tunnels using 3D ground-penetrating radar}, series = {Near surface geophysics}, volume = {17}, journal = {Near surface geophysics}, number = {3}, publisher = {Wiley}, address = {Hoboken}, issn = {1569-4445}, doi = {10.1002/nsg.12039}, pages = {291 -- 298}, year = {2019}, abstract = {Ground-penetrating radar is widely used to provide highly resolved images of subsurface sedimentary structures, with implications for processes active in the vadose zone. Frequently overlooked among these structures are tunnels excavated by fossorial animals (e.g., moles). We present two repeated ground-penetrating radar surveys performed a year apart in 2016 and 2017. Careful three-dimensional data processing reveals, in each data set, a pattern of elongated structures that are interpreted as a subsurface mole tunnel network. Our data demonstrate the ability of three-dimensional ground-penetrating radar imaging to non-invasively delineate the small animal tunnels (similar to 5 cm diameter) at a higher spatial and geolocation resolution than has previously been achieved. In turn, this makes repeated surveys and, therefore, long-term monitoring possible. Our results offer valuable insight into the understanding of the near-surface and showcase a potential new application for a geophysical method as well as a non-invasive method of ecological surveying.}, language = {en} } @article{AllroggenTronicke2016, author = {Allroggen, Niklas and Tronicke, Jens}, title = {Attribute-based analysis of time-lapse ground-penetrating radar data}, series = {Geophysics}, volume = {81}, journal = {Geophysics}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2015-0171.1}, pages = {H1 -- H8}, year = {2016}, abstract = {Analysis of time-lapse ground-penetrating radar (GPR) data can provide information regarding subsurface hydrological processes, such as preferential flow. However, the analysis of time-lapse data is often limited by data quality; for example, for noisy input data, the interpretation of difference images is often difficult. Motivated by modern image-processing tools, we have developed two robust GPR attributes, which allow us to distinguish amplitude (contrast similarity) and time-shift (structural similarity) variations related to differences between individual time-lapse GPR data sets. We tested and evaluated our attributes using synthetic data of different complexity. Afterward, we applied them to a field data example, in which subsurface flow was induced by an artificial rainfall event. For all examples, we identified our structural similarity attribute to be a robust measure for highlighting time-lapse changes also in data with low signal-to-noise ratios. We determined that our new attribute-based workflow is a promising tool to analyze time-lapse GPR data, especially for imaging subsurface hydrological processes.}, language = {en} } @article{AllroggenTronickeDelocketal.2015, author = {Allroggen, Niklas and Tronicke, Jens and Delock, Marcel and B{\"o}niger, Urs}, title = {Topographic migration of 2D and 3D ground-penetrating radar data considering variable velocities}, series = {Near surface geophysics}, volume = {13}, journal = {Near surface geophysics}, number = {3}, publisher = {European Association of Geoscientists \& Engineers}, address = {Houten}, issn = {1569-4445}, doi = {10.3997/1873-0604.2014037}, pages = {4}, year = {2015}, abstract = {We present a 2D/3D topographic migration scheme for ground-penetrating radar (GPR) data which is able to account for variable velocities by using the root mean square (rms) velocity approximation. We test our migration scheme using a synthetic 2D example and compare our migrated image to the results obtained using common GPR migration approaches. Furthermore, we apply it to 2D and 3D field data. These examples are recorded across common subsurface settings including surface topography and variations in the GPR subsurface velocity field caused by a shallow ground water table. In such field settings, our migration strategy provides well focused images of commonoffset GPR data without the need for a detailed interval velocity model. The synthetic and field examples demonstrate that our topographic migration scheme allows for accurate GPR imaging in the presence of variations in surface topography and subsurface velocity.}, language = {en} } @article{AllroggenvanSchaikTronicke2015, author = {Allroggen, Niklas and van Schaik, N. Loes M. B. and Tronicke, Jens}, title = {4D ground-penetrating radar during a plot scale dye tracer experiment}, series = {Journal of applied geophysics}, volume = {118}, journal = {Journal of applied geophysics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0926-9851}, doi = {10.1016/j.jappgeo.2015.04.016}, pages = {139 -- 144}, year = {2015}, abstract = {Flow phenomena in the unsaturated zone are highly variable in time and space. Thus, it is challenging to measure and monitor such processes under field conditions. Here, we present a new setup and interpretation approach for combining a dye tracer experiment with a 4D ground-penetrating radar (GPR) survey. Therefore, we designed a rainfall experiment during which we measured three surface-based 3D GPR surveys using a pair of 500 MHz antennas. Such a survey setup requires accurate acquisition and processing techniquesto extract time-lapse information supporting the interpretation of selected cross-sections photographed after excavating the site. Our results reveal patterns of traveltime changes in the measured GPR data, which are associated with soil moisture changes. As distinct horizons are present at our site, such changes can be quantified and transferred into changes in total soil moisture content. Our soil moisture estimates are similar to the amount of infiltrated water, which confirms our experimental approach and makes us confident for further developing this strategy, especially, with respect to improving the temporal and spatial resolution. (C) 2015 Elsevier B.V. All rights reserved.}, language = {en} } @article{AlonsoBookhagenCarrapaetal.2006, author = {Alonso, Ricardo N. and Bookhagen, Bodo and Carrapa, Barbara and Coutand, Isabelle and Haschke, Michael and Hilley, George E. and Schoenbohm, Lindsay M. and Sobel, Edward and Strecker, Manfred and Trauth, Martin H. and Villanueva, Arturo}, title = {Tectonics, climate and landscape evolution of the Southern Central Andes : the Argentine Puna Plateau and adjacent regions between 22 and 30°S}, isbn = {978-3-540- 24329-8}, year = {2006}, language = {en} } @article{AlonzoBookhagenMcFaddenetal.2015, author = {Alonzo, Michael and Bookhagen, Bodo and McFadden, Joseph P. and Sun, Alex and Roberts, Dar A.}, title = {Mapping urban forest leaf area index with airborne lidar using penetration metrics and allometry}, series = {Remote sensing of environment : an interdisciplinary journal}, volume = {162}, journal = {Remote sensing of environment : an interdisciplinary journal}, publisher = {Elsevier}, address = {New York}, issn = {0034-4257}, doi = {10.1016/j.rse.2015.02.025}, pages = {141 -- 153}, year = {2015}, abstract = {In urban areas, leaf area index (LAI) is a key ecosystem structural attribute with implications for energy and water balance, gas exchange, and anthropogenic energy use. In this study, we estimated LAI spatially using airborne lidar in downtown Santa Barbara, California, USA. We implemented two different modeling approaches. First, we directly estimated effective LAI (LAIe) using scan angle- and clump-corrected lidar laser penetration metrics (LPM). Second, we adapted existing allometric equations to estimate crown structural metrics including tree height and crown base height using lidar. The latter approach allowed for LAI estimates at the individual tree-crown scale. The LPM method, at both high and decimated point densities, resulted in good linear agreement with estimates from ground-based hemispherical photography (r(2) = 0.82, y = 0.99x) using a model that assumed a spherical leaf angle distribution. Within individual tree crown segments, the lidar estimates of crown structure closely paralleled field measurements (e.g., r(2) = 0.87 for crown length). LAI estimates based on the lidar crown measurements corresponded well with estimates from field measurements (r(2) = 0.84, y = 0.97x + 0.10). Consistency of the LPM and allometric lidar methods was also strong at 71 validation plots (r(2) = 0.88) and at 450 additional sample locations across the entire study area (r(2) = 0.72). This level of correspondence exceeded that of the canopy hemispherical photography and allometric, ground-based estimates (r(2) = 0.53). The first-order alignment of these two disparate methods may indicate that the error bounds for mapping LAI in cities are small enough to pursue large scale, spatially explicit estimation. (C) 2015 Elsevier Inc All rights reserved.}, language = {en} } @misc{AlsemgeestSchroederBoettgeretal.2016, author = {Alsemgeest, Jitse and Schr{\"o}der, S. and Boettger, Ute and Pavlov, S. G. and Weber, I. and Greshake, A. and Kn{\"o}fler, H. -R. and Altenberger, Uwe and H{\"u}bers, H. -W.}, title = {COMBINED RAMAN-LIBS STUDIES ON IRON SULFIDES TO INVESTIGATE THE EFECTS OF THE LIBS PLASMA ON THE MINERAL COMPOSITION.}, series = {Monthly notices of the Royal Astronomical Society}, volume = {51}, journal = {Monthly notices of the Royal Astronomical Society}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {1086-9379}, pages = {A147 -- A147}, year = {2016}, language = {en} } @article{AltenbachPflaumScheibeletal.1999, author = {Altenbach, Alexander V. and Pflaum, U. and Scheibel, Thomas R. and Thies, A. and Timm, M. and Trauth, Martin H.}, title = {Scaling percentages of benthic forminifera with flux rates of organic carbon}, year = {1999}, language = {en} } @article{Altenberger1997, author = {Altenberger, Uwe}, title = {Strain localization mechanisms in deep seated layered rocks}, year = {1997}, language = {en} } @article{Altenberger1996, author = {Altenberger, Uwe}, title = {Material transport in channelized fluids-examples from hightemperature shear zones and its comparsion with minor deformed ares of the Mid-European Variscan belt}, year = {1996}, language = {en} } @article{Altenberger1996, author = {Altenberger, Uwe}, title = {Fluid enhanced element redistribution, mass transport and volume changes in eclogite and amphibolite facies shear zones of different geological settings}, year = {1996}, language = {en} } @misc{Altenberger1992, author = {Altenberger, Uwe}, title = {Stress-induced natural transformation of ortho- to clinohypersthene in metagabbros of the Ivrea Zone, Northern Italy}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-40778}, year = {1992}, abstract = {Orthopyroxenes of a high temperature protomylonite of the Ivrea Zone, Northern Italy show twin like polysynthetic lamellae parallel to {210} of the hypersthene host. The transformation is caused by plastic deformation under high metamorphic conditions which has resulted in dynamic recrystallization of pyroxene and plagioclase. The lamellae consist of clinohypersthene. The twin plane and the lamellar clino-orthoinversion of hypersthene due to natural deformation have not been described hitherto.}, language = {en} } @article{AltenbergerCisternaGuenteretal.2021, author = {Altenberger, Uwe and Cisterna, Clara and G{\"u}nter, Christina and Guti{\´e}rrez, Adolfo Antonio and Rosales, J.}, title = {Tectono-metamorphic evolution of the proto-Andean margin of Gondwana}, series = {Journal of South American earth sciences}, volume = {110}, journal = {Journal of South American earth sciences}, publisher = {Elsevier}, address = {Oxford}, issn = {0895-9811}, doi = {10.1016/j.jsames.2021.103305}, pages = {23}, year = {2021}, abstract = {The present work gives a detailed analysis of the metamorphic and structural evolution of the back-arc portion of the Famatinian Orogen exposed in the southern Sierra de Aconquija (Cuesta de La Chilca segment) in the Sierras Pampeanas Orientales (Eastern Pampean Sierras). The Pampeanas Orientales include from north to south the Aconquija, Ambato and Ancasti mountains. They are mainly composed of middle to high grade metasedimentary units and magmatic rocks. At the south end of the Sierra de Aconquija, along an east to west segment extending over nearly 10 km (Cuesta de La Chilca), large volumes of metasedimentary rocks crop out. The eastern metasediments were defined as members of the El Portezuelo Metamorphic-Igneous Complex (EPMIC) or Eastern block and the western ones relate to the Quebrada del Molle Metamorphic Complex (QMMC) or Western block. The two blocks are divided by the La Chilca Shear Zone, which is reactivated as the Rio Chanarito fault. The EPMIC, forming the hanging wall, is composed of schists, gneisses and rare amphibolites, calc- silicate schists, marbles and migmatites. The rocks underwent multiple episodes of deformation and a late high strain-rate episode with gradually increasing mylonitization to the west. Metamorphism progrades from a M-1 phase to the peak M-3, characterized by the reactions: Qtz + Pl + Bt +/- Ms -> Grt + Bt(2) + Pl(2) +/- Sil +/- Kfs, Qtz + Bt + Sil -> Crd + Kfs and Qtz + Grt + Sil -> Crd. The M-3 assemblage is coeval with the dominant foliation related to a third deformational phase (D-3). The QMMC, forming the foot wall, is made up of fine-grained banded quartz - biotite schists with quartz veins and quartz-feldspar-rich pegmatites. To the east, schists are also overprinted by mylonitization. The M-3 peak assemblage is quartz + biotite + plagioclase +/- garnet +/- sillimanite +/- muscovite +/- ilmenite +/- magnetite +/- apatite. The studied segment suffered multiphase deformation and metamorphism. Some of these phases can be correlated between both blocks. D-1 is locally preserved in scarce outcrops in the EPMIC but is the dominant in the QMMC, where S-1 is nearly parallel to S-0. In the EPMIC, D-2 is represented by the S-2 foliation, related to the F-2 folding that overprints S-1, with dominant strike NNW - SSE and high angles dip to the E. D-3 in the EPMIC have F-3 folds with axis oblique to S-2; the S-3 foliation has striking NW - SE dipping steeply to the E or W and develops interference patterns. In the QMMC, S-2 (D-2) is a discontinuous cleavage oblique to S-1 and transposed by S-3 (D-3), subparallel to S-1. Such structures in the QMMC developed at subsolidus conditions and could be correlated to those of the EPMIC, which formed under higher P-T conditions. The penetrative deformation D-2 in the EPMIC occurred during a prograde path with syntectonic growth of garnet reaching P-T conditions of 640 degrees C and 0.54 GPa in the EPMIC. This stage was followed by a penetrative deformation D-3 with syn-kinematic growth of garnet, cordierite and plagioclase. Peak P-T conditions calculated for M-3 are 710 degrees C and 0.60 GPa, preserved in the western part of the EPMIC, west of the unnamed fault. The schists from the QMMC suffered the early low grade M-1 metamorphism with minimum PT conditions of ca 400 degrees C and 0.35 GPa, comparable to the fine schists (M-1) outcropping to the east. The D-2 deformation is associated with the prograde M-2 metamorphism. The penetrative D-3 stage is related to a medium grade metamorphism M-3, with peak conditions at ca 590 degrees C and 0.55 GPa. The superimposed stages of deformation and metamorphism reaching high P-T conditions followed by isothermal decompression, defining a clockwise orogenic P-T path. During the Lower Paleozoic, folds were superimposed and recrystallization as well as partial melting at peak conditions occurred. Similar characteristics were described from the basement from other Famatinian-dominated locations of the Sierra de Aconquija and other ranges of the Sierras Pampeanas Orientales.}, language = {en} } @article{AltenbergerKruhl1997, author = {Altenberger, Uwe and Kruhl, J. H.}, title = {The long life of a thin and dry-temperature shear zone in the Hercynian lower crust of Calabria (s.Italy)}, year = {1997}, language = {en} } @article{AltenbergerMejiaJimenezGuenteretal.2012, author = {Altenberger, Uwe and Mejia Jimenez, D. M. and G{\"u}nter, C. and Sierra Rodriguez, G. I. and Scheffler, F. and Oberh{\"a}nsli, Roland}, title = {The Garzn Massif, Colombia-a new ultrahigh-temperature metamorphic complex in the early Neoproterozoic of northern South America}, series = {Mineralogy and petrology}, volume = {105}, journal = {Mineralogy and petrology}, number = {3-4}, publisher = {Springer}, address = {Wien}, issn = {0930-0708}, doi = {10.1007/s00710-012-0202-1}, pages = {171 -- 185}, year = {2012}, abstract = {The Garzn Complex of the Garzn Massif in SW Colombia is composed of the Vergel Granulite Unit (VG) and the Las Margaritas Migmatite Unit (LMM). Previous studies reveal peak temperature conditions for the VG of about 740 A degrees C. The present study considers the remarkable exsolution phenomena in feldspars and pyroxenes and titanium-in-quartz thermometry. Recalculated ternary feldspar compositions indicate temperatures around 900-1,000 A degrees C just at or above the ultra-high temperature-metamorphism (UHTM) boundary of granulites. The calculated temperatures range of exsolved ortho- and clinopyroxenes also supports the existence of an UHTM event. In addition, titanium-in-quartz thermometry points towards ultra-high temperatures. It is the first known UHTM crustal segment in the northern part of South America. Although a mean geothermal gradient of ca 38 A degrees C km(-1) could imply additional heat supply in the lower crust controlling this extreme of peak metamorphism, an alternative model is suggested. The formation of the Vergel Granulite Unit is supposed to be formed in a continental back-arc environment with a thinned and weakened crust behind a magmatic arc (Guapotn-Mancagua Gneiss) followed by collision. In contrast, rocks of the adjacent Las Margaritas Migmatite Unit display "normal" granulite facies temperatures and are formed in a colder lower crust outside the arc, preserved by the Guapotn-Mancagu Gneiss. Back-arc formation was followed by inversion and thickening of the basin. The three units that form the modern-day Garzn Massif, were juxtaposed upon each other during collision (at ca. 1,000 Ma) and exhumation. The collision leading to the deformation of the studied area is part of the Grenville orogeny leading to the amalgamation of Rodinia.}, language = {en} } @article{AltenbergerOberhaensliSteinetal.2001, author = {Altenberger, Uwe and Oberh{\"a}nsli, Roland and Stein, Eckehard and Moghni, Mohsen}, title = {Geochemistry, tectonic setting and geodynamic position of late orogenic dikes in the Melibocus Massiv, Bergstraesser Odenwald}, year = {2001}, language = {en} } @article{AltenbergerProsserGrandeetal.2013, author = {Altenberger, Uwe and Prosser, Giacomo and Grande, Atonella and G{\"u}nter, Christina and Langone, Antonio}, title = {A seismogenic zone in the deep crust indicated by pseudotachylytes and ultramylonites in granulite-facies rocks of Calabria (Southern Italy)}, series = {Contributions to mineralogy and petrology}, volume = {166}, journal = {Contributions to mineralogy and petrology}, number = {4}, publisher = {Springer}, address = {New York}, issn = {0010-7999}, doi = {10.1007/s00410-013-0904-3}, pages = {975 -- 994}, year = {2013}, abstract = {Pseudotachylyte veins frequently associated with mylonites and ultramylonites occur within migmatitic paragneisses, metamonzodiorites, as well as felsic and mafic granulites at the base of the section of the Hercynian lower crust exposed in Calabria (Southern Italy). The crustal section is tectonically superposed on lower grade units. Ultramylonites and pseudotachylytes are particularly well developed in migmatitic paragneisses, whereas sparse fault-related pseudotachylytes and thin mylonite/ultramylonite bands occur in granulite-facies rocks. The presence of sillimanite and clinopyroxene in ultramylonites and mylonites indicates that relatively high-temperature conditions preceded the formation of pseudotachylytes. We have analysed pseudotachylytes from different rock types to ascertain their deep crustal origin and to better understand the relationships between brittle and ductile processes during deformation of the deeper crust. Different protoliths were selected to test how lithology controls pseudotachylyte composition and textures. In migmatites and felsic granulites, euhedral or cauliflower-shaped garnets directly crystallized from pseudotachylyte melts of near andesitic composition. This indicates that pseudotachylytes originated at deep crustal conditions (> 0.75 GPa). In mafic protoliths, quenched needle-to-feather-shaped high-alumina orthopyroxene occurs in contact with newly crystallized plagioclase. The pyroxene crystallizes in garnet-free and garnet-bearing veins. The simultaneous growth of orthopyroxene and plagioclase as well as almandine, suggests lower crustal origin, with pressures in excess of 0.85 GPa. The existence of melts of different composition in the same vein indicates the stepwise, non-equilibrium conditions of frictional melting. Melt formed and intruded into pre-existing anisotropies. In mafic granulites, brittle faulting is localized in a previously formed thin high-temperature mylonite bands. migmatitic gneisses are deformed into ultramylonite domains characterized by s-c fabric. Small grain size and fluids lowered the effective stress on the c planes favouring a seismic event and the consequent melt generation. Microstructures and ductile deformation of pseudotachylytes suggest continuous ductile flow punctuated by episodes of high-strain rate, leading to seismic events and melting.}, language = {en} } @article{AltenbergerWilhelm2000, author = {Altenberger, Uwe and Wilhelm, Stefan}, title = {Ductile deformation of K-feldspar in eclogite facies shear zones in the Bergen Arcs, Norway : tectonophysics}, year = {2000}, language = {en} } @phdthesis{Ambili2012, author = {Ambili, Anoop}, title = {Lake sediments as climate and tectonic archives in the Indian summer monsoon domain}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64799}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {The Indian summer monsoon (ISM) is one of the largest climate systems on earth and impacts the livelihood of nearly 40\% of the world's population. Despite dedicated efforts, a comprehensive picture of monsoon variability has proved elusive largely due to the absence of long term high resolution records, spatial inhomogeneity of the monsoon precipitation, and the complex forcing mechanisms (solar insolation, internal teleconnections for e.g., El Ni{\~n}o-Southern Oscillation, tropical-midlatitude interactions). My work aims to improve the understanding of monsoon variability through generation of long term high resolution palaeoclimate data from climatically sensitive regions in the ISM and westerlies domain. To achieve this aim I have (i) identified proxies (sedimentological, geochemical, isotopic, and mineralogical) that are sensitive to environmental changes; (ii) used the identified proxies to generate long term palaeoclimate data from two climatically sensitive regions, one in NW Himalayas (transitional westerlies and ISM domain in the Spiti valley and one in the core monsoon zone (Lonar lake) in central India); (iii) undertaken a regional overview to generate "snapshots" of selected time slices; and (iv) interpreted the spatial precipitation anomalies in terms of those caused by modern teleconnections. This approach must be considered only as the first step towards identifying the past teleconnections as the boundary conditions in the past were significantly different from today and would have impacted the precipitation anomalies. As the Spiti valley is located in the in the active tectonic orogen of Himalayas, it was essential to understand the role of regional tectonics to make valid interpretations of catchment erosion and detrital influx into the lake. My approach of using integrated structural/morphometric and geomorphic signatures provided clear evidence for active tectonics in this area and demonstrated the suitability of these lacustrine sediments as palaleoseismic archives. The investigations on the lacustrine outcrops in Spiti valley also provided information on changes in seasonality of precipitation and occurrence of frequent and intense periods (ca. 6.8-6.1 cal ka BP) of detrital influx indicating extreme hydrological events in the past. Regional comparison for this time slice indicates a possible extended "break-monsoon like" mode for the monsoon that favors enhanced precipitation over the Tibetan plateau, Himalayas and their foothills. My studies on surface sediments from Lonar lake helped to identify environmentally sensitive proxies which could also be used to interpret palaeodata obtained from a ca. 10m long core raised from the lake in 2008. The core encompasses the entire Holocene and is the first well dated (by 14C) archive from the core monsoon zone of central India. My identification of authigenic evaporite gaylussite crystals within the core sediments provided evidence of exceptionally drier conditions during 4.7-3.9 and 2.0-0.5 cal ka BP. Additionally, isotopic investigations on these crystals provided information on eutrophication, stratification, and carbon cycling processes in the lake.}, language = {en} } @article{AminovDingMamadjonovetal.2017, author = {Aminov, Jovid and Ding, Lin and Mamadjonov, Yunus and Dupont-Nivet, Guillaume and Aminov, Jamshed and Zhang, Li-Yun and Yoqubov, Shokirjon and Aminov, Javhar and Abdulov, Sherzod}, title = {Pamir Plateau formation and crustal thickening before the India-Asia collision inferred from dating and petrology of the 110-92 Ma Southern Pamir volcanic sequence}, series = {Gondwana research : international geoscience journal ; official journal of the International Association for Gondwana Research}, volume = {51}, journal = {Gondwana research : international geoscience journal ; official journal of the International Association for Gondwana Research}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1342-937X}, doi = {10.1016/j.gr.2017.08.003}, pages = {310 -- 326}, year = {2017}, abstract = {The formation of the Pamir is a key component of the India-Asia collision with major implications for lithospheric processes, plateau formation, land-sea configurations and associated climate changes. Although the formation of the Pamir is traditionally linked to Cenozoic processes associated with the India-Asia collision, the contribution of the Mesozoic tectonic evolution remains poorly understood. The Pamir was formed by the suturing of Gondwanan terranes to the south margin of Eurasia, however, the timing and tectonic mechanisms associated with this Mesozoic accretion remain poorly constrained. These processes are recorded by several igneous belts within these terranes, which are not well studied. Within the Southern Pamir, the Albian-Turonian volcanic rocks and comagmatic plutons of the Kyzylrabat Igneous Complex (KIC) provide an important and still unconstrained record of the Pamir evolution. Here we provide the age, origin and the geodynamic setting of the KIC volcanics by studying their petrology, zircon U-Pb geochronology, geochemistry and isotope composition.17 samples from the KIC volcanics yield U-Pb ages spanning from 92 to 110 Ma. The volcanics are intermediate to acidic in composition (SiO2 = 56-69 wt\%) and exhibit high-K calc-alkaline and shoshonitic affinity (K2O/Na2O = 12.2 wt\%). They show enrichment in LILE and LREE and depletion in HFSE and HREE with negative Ta, Ti and Nb anomalies, suggesting an arc-related tectonic setting for their formation. Low sNd(t) values (from 9.1 to 4.7), relatively high Sr-87/Sr-86(i) ratios (0.7069-0.7096) and broad range of zircon stif values (from 22.6 to 1.5) suggest a mixture of different magma sources. These features suggest that volcanics were derived by crustal under- or intraplating of an enriched subduction-related mantle shoshonitic magmas, by heating and partial melting of the lower crust, and by mixing of both magma components. Our results further imply that the KIC volcanics represent a shoshonitic suite typical of an evolution from active continental arc to post-collisional setting with a steepening of the Benioff zone and thickening of the crust toward the back-arc. This setting is best explained by the subduction- collision transition along the Shyok suture due to accretion of the Kohistan island arc to the Karakoram. This suggests that a significant part of the crustal shortening and thickening accommodated in the Pamir occurred in the Mesozoic before the India-Asia collision with implications for regional tectonic models. This further suggests the Pamir was already a major topographic feature with potentially important paleoclimate forcing such as the monsoonal circulation. (C) 2017 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved.}, language = {en} } @article{AmourMuttiChristetal.2013, author = {Amour, Frederic and Mutti, Maria and Christ, Nicolas and Immenhauser, Adrian and Benson, Gregory S. and Agar, Susan M. and Tomas, Sara and Kabiri, Lahcen}, title = {Outcrop analog for an oolitic carbonate ramp reservoir a scale-dependent geologic modeling approach based on stratigraphic hierarchy}, series = {AAPG bulletin}, volume = {97}, journal = {AAPG bulletin}, number = {5}, publisher = {American Association of Petroleum Geologists}, address = {Tulsa}, issn = {0149-1423}, doi = {10.1306/10231212039}, pages = {845 -- 871}, year = {2013}, abstract = {Considerable effort has been devoted to the development of simulation algorithms for facies modeling, whereas a discussion of how to combine those techniques has not existed. The integration of multiple geologic data into a three-dimensional model, which requires the combination of simulation techniques, is yet a current challenge for reservoir modeling. This article presents a thought process that guides the acquisition and modeling of geologic data at various scales. Our work is based on outcrop data collected from a Jurassic carbonate ramp located in the High Atlas mountain range of Morocco. The study window is 1 km (0.6 mi) wide and 100 m (328.1 ft) thick. We describe and model the spatial and hierarchical arrangement of carbonate bodies spanning from largest to smallest: (1) stacking pattern of high-frequency depositional sequences, (2) facies association, and (3) lithofacies. Five sequence boundaries were modeled using differential global position system mapping and light detection and ranging data. The surface-based model shows a low-angle profile with modest paleotopographic relief at the inner-to-middle ramp transition. Facies associations were populated using truncated Gaussian simulation to preserve ordered trends between the inner, middle, and outer ramps. At the lithofacies scale, field observations and statistical analysis show a mosaiclike distribution that was simulated using a fully stochastic approach with sequential indicator simulation. This study observes that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The selection and implementation of different techniques customized for each level of the stratigraphic hierarchy will provide the essential computing flexibility to model carbonate settings. This study demonstrates that a scale-dependent modeling approach should be a common procedure when building subsurface and outcrop models.}, language = {en} } @phdthesis{Amour2013, author = {Amour, Fr{\´e}d{\´e}ric}, title = {3-D modeling of shallow-water carbonate systems : a scale-dependent approach based on quantitative outcrop studies}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66621}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {The study of outcrop modeling is located at the interface between two fields of expertise, Sedimentology and Computing Geoscience, which respectively investigates and simulates geological heterogeneity observed in the sedimentary record. During the last past years, modeling tools and techniques were constantly improved. In parallel, the study of Phanerozoic carbonate deposits emphasized the common occurrence of a random facies distribution along single depositional domain. Although both fields of expertise are intrinsically linked during outcrop simulation, their respective advances have not been combined in literature to enhance carbonate modeling studies. The present study re-examines the modeling strategy adapted to the simulation of shallow-water carbonate systems, based on a close relationship between field sedimentology and modeling capabilities. In the present study, the evaluation of three commonly used algorithms Truncated Gaussian Simulation (TGSim), Sequential Indicator Simulation (SISim), and Indicator Kriging (IK), were performed for the first time using visual and quantitative comparisons on an ideally suited carbonate outcrop. The results show that the heterogeneity of carbonate rocks cannot be fully simulated using one single algorithm. The operating mode of each algorithm involves capabilities as well as drawbacks that are not capable to match all field observations carried out across the modeling area. Two end members in the spectrum of carbonate depositional settings, a low-angle Jurassic ramp (High Atlas, Morocco) and a Triassic isolated platform (Dolomites, Italy), were investigated to obtain a complete overview of the geological heterogeneity in shallow-water carbonate systems. Field sedimentology and statistical analysis performed on the type, morphology, distribution, and association of carbonate bodies and combined with palaeodepositional reconstructions, emphasize similar results. At the basin scale (x 1 km), facies association, composed of facies recording similar depositional conditions, displays linear and ordered transitions between depositional domains. Contrarily, at the bedding scale (x 0.1 km), individual lithofacies type shows a mosaic-like distribution consisting of an arrangement of spatially independent lithofacies bodies along the depositional profile. The increase of spatial disorder from the basin to bedding scale results from the influence of autocyclic factors on the transport and deposition of carbonate sediments. Scale-dependent types of carbonate heterogeneity are linked with the evaluation of algorithms in order to establish a modeling strategy that considers both the sedimentary characteristics of the outcrop and the modeling capabilities. A surface-based modeling approach was used to model depositional sequences. Facies associations were populated using TGSim to preserve ordered trends between depositional domains. At the lithofacies scale, a fully stochastic approach with SISim was applied to simulate a mosaic-like lithofacies distribution. This new workflow is designed to improve the simulation of carbonate rocks, based on the modeling of each scale of heterogeneity individually. Contrarily to simulation methods applied in literature, the present study considers that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The implementation of different techniques customized for each level of the stratigraphic hierarchy provides the essential computing flexibility to model carbonate systems. Closer feedback between advances carried out in the field of Sedimentology and Computing Geoscience should be promoted during future outcrop simulations for the enhancement of 3-D geological models.}, language = {en} } @article{AndermannCraveGloaguenetal.2012, author = {Andermann, Christoff and Crave, Alain and Gloaguen, Richard and Davy, Philippe and Bonnet, Stephane}, title = {Connecting source and transport: Suspended sediments in the Nepal Himalayas}, series = {Earth \& planetary science letters}, volume = {351}, journal = {Earth \& planetary science letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-821X}, doi = {10.1016/j.epsl.2012.06.059}, pages = {158 -- 170}, year = {2012}, abstract = {Understanding the dynamics of sediment fluxes is a key issue to constrain modern erosion rates in mountain belts and determine the still debated level of control exerted by precipitation, topography and tectonics. The well defined monsoon seasonality in the Himalayas, together with active tectonics and strong relief provide an ideal environment to assess these possible interactions. For this purpose, we present a new compilation of daily suspended sediment data for 12 stations of the major rivers of the Nepal Himalayas. We analyze the relationships of sediment transport with daily river discharge and precipitation data as well as with morphometric parameters. We show that suspended sediment concentrations vary systematically through the seasons and asynchronously to river discharge displaying a hysteresis effect. This clockwise hysteresis effect disappears when suspended sediment fluxes are directly compared with direct storm discharge. Therefore we attribute the hysteresis effect to groundwater dilution rather than a sediment supply limitation. We infer a rating model to calculate erosion rates directly from long river discharge chronicles. We show that, when normalized by drainage area and mean sediment flux, all rivers exhibit the same trend. This similarity implies that all river basins have the same erosion behavior, independent of location, size and catchment characteristics. Erosion rates calculated from suspended sediment fluxes range between 0.1 and 2.8 mm/yr. The erosion rates of the three main basins of Nepal are in the range 0.9-1.5 mm/yr. Erosion rates in the Higher Himalayas are relatively low ( <0.5 mm/yr, except for Kali Gandaki), while in the Lesser Himalayas they range from 0.2 to 2 mm/yr. We propose that material transport in the rivers depends on hillslope sediment supply, which is, in turn, controlled by those rainfalls producing direct runoff. In other words, the rivers in the Nepal Himalayas are supply-limited and the hillsopes as a contributing source are transport-limited. We also show that erosion processes are not as much controlled by infrequently occurring extreme precipitation events, than by moderate ones with a high recurrence interval.}, language = {en} } @article{AndersenEgholmKnudsenetal.2015, author = {Andersen, Jane Lund and Egholm, D. L. and Knudsen, M. F. and Jansen, John D. and Nielsen, S. B.}, title = {The periglacial engine of mountain erosion - Part 1: Rates of frost cracking and frost creep}, series = {Earth surface dynamics}, volume = {3}, journal = {Earth surface dynamics}, number = {4}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {2196-6311}, doi = {10.5194/esurf-3-447-2015}, pages = {447 -- 462}, year = {2015}, abstract = {With accelerating climate cooling in the late Cenozoic, glacial and periglacial erosion became more widespread on the surface of the Earth. The resultant shift in erosion patterns significantly changed the large-scale morphology of many mountain ranges worldwide. Whereas the glacial fingerprint is easily distinguished by its characteristic fjords and U-shaped valleys, the periglacial fingerprint is more subtle but potentially prevails in some mid- to high-latitude landscapes. Previous models have advocated a frost-driven control on debris production at steep headwalls and glacial valley sides. Here we investigate the important role that periglacial processes also play in less steep parts of mountain landscapes. Understanding the influences of frost-driven processes in low-relief areas requires a focus on the consequences of an accreting soil mantle, which characterises such surfaces. We present a new model that quantifies two key physical processes: frost cracking and frost creep, as a function of both temperature and sediment thickness. Our results yield new insights into how climate and sediment transport properties combine to scale the intensity of periglacial processes. The thickness of the soil mantle strongly modulates the relation between climate and the intensity of mechanical weathering and sediment flux. Our results also point to an offset between the conditions that promote frost cracking and those that promote frost creep, indicating that a stable climate can provide optimal conditions for only one of those processes at a time. Finally, quantifying these relations also opens up the possibility of including periglacial processes in large-scale, long-term landscape evolution models, as demonstrated in a companion paper.}, language = {en} } @phdthesis{Angelopoulos2020, author = {Angelopoulos, Michael}, title = {Mechanisms of sub-aquatic permafrost evolution in Arctic coastal environments}, school = {Universit{\"a}t Potsdam}, pages = {165}, year = {2020}, abstract = {Subsea permafrost is perennially cryotic earth material that lies offshore. Most submarine permafrost is relict terrestrial permafrost beneath the Arctic shelf seas, was inundated after the last glaciation, and has been warming and thawing ever since. It is a reservoir and confining layer for gas hydrates and has the potential to release greenhouse gases and affect global climate change. Furthermore, subsea permafrost thaw destabilizes coastal infrastructure. While numerous studies focus on its distribution and rate of thaw over glacial timescales, these studies have not been brought together and examined in their entirety to assess rates of thaw beneath the Arctic Ocean. In addition, there is still a large gap in our understanding of sub-aquatic permafrost processes on finer spatial and temporal scales. The degradation rate of subsea permafrost is influenced by the initial conditions upon submergence. Terrestrial permafrost that has already undergone warming, partial thawing or loss of ground ice may react differently to inundation by seawater compared to previously undisturbed ice-rich permafrost. Heat conduction models are sufficient to model the thaw of thick subsea permafrost from the bottom, but few studies have included salt diffusion for top-down chemical degradation in shallow waters characterized by mean annual cryotic conditions on the seabed. Simulating salt transport is critical for assessing degradation rates for recently inundated permafrost, which may accelerate in response to warming shelf waters, a lengthening open water season, and faster coastal erosion rates. In the nearshore zone, degradation rates are also controlled by seasonal processes like bedfast ice, brine injection, seasonal freezing under floating ice conditions and warm freshwater discharge from large rivers. The interplay of all these variables is complex and needs further research. To fill this knowledge gap, this thesis investigates sub-aquatic permafrost along the southern coast of the Bykovsky Peninsula in eastern Siberia. Sediment cores and ground temperature profiles were collected at a freshwater thermokarst lake and two thermokarst lagoons in 2017. At this site, the coastline is retreating, and seawater is inundating various types of permafrost: sections of ice-rich Pleistocene permafrost (Yedoma) cliffs at the coastline alternate with lagoons and lower elevation previously thawed and refrozen permafrost basins (Alases). Electrical resistivity surveys with floating electrodes were carried out to map ice-bearing permafrost and taliks (unfrozen zones in the permafrost, usually formed beneath lakes) along the diverse coastline and in the lagoons. Combined with the borehole data, the electrical resistivity results permit estimation of contemporary ice-bearing permafrost characteristics, distribution, and occasionally, thickness. To conceptualize possible geomorphological and marine evolutionary pathways to the formation of the observed layering, numerical models were applied. The developed model incorporates salt diffusion and seasonal dynamics at the seabed, including bedfast ice. Even along coastlines with mean annual non-cryotic boundary conditions like the Bykovsky Peninsula, the modelling results show that salt diffusion minimizes seasonal freezing of the seabed, leading to faster degradation rates compared to models without salt diffusion. Seasonal processes are also important for thermokarst lake to lagoon transitions because lagoons can generate cold hypersaline conditions underneath the ice cover. My research suggests that ice-bearing permafrost can form in a coastal lagoon environment, even under floating ice. Alas basins, however, may degrade more than twice as fast as Yedoma permafrost in the first several decades of inundation. In addition to a lower ice content compared to Yedoma permafrost, Alas basins may be pre-conditioned with salt from adjacent lagoons. Considering the widespread distribution of thermokarst in the Arctic, its integration into geophysical models and offshore surveys is important to quantify and understand subsea permafrost degradation and aggradation. Through numerical modelling, fieldwork, and a circum-Arctic review of subsea permafrost literature, this thesis provides new insights into sub-aquatic permafrost evolution in saline coastal environments.}, language = {en} } @article{AngelopoulosOverduinWestermannetal.2020, author = {Angelopoulos, Michael and Overduin, Pier Paul and Westermann, Sebastian and Tronicke, Jens and Strauss, Jens and Schirrmeister, Lutz and Biskaborn, Boris and Liebner, Susanne and Maksimov, Georgii and Grigoriev, Mikhail N. and Grosse, Guido}, title = {Thermokarst lake to lagoon transitions in Eastern Siberia}, series = {Journal of geophysical research : Earth surface}, volume = {125}, journal = {Journal of geophysical research : Earth surface}, number = {10}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9003}, doi = {10.1029/2019JF005424}, pages = {21}, year = {2020}, abstract = {As the Arctic coast erodes, it drains thermokarst lakes, transforming them into lagoons, and, eventually, integrates them into subsea permafrost. Lagoons represent the first stage of a thermokarst lake transition to a marine setting and possibly more saline and colder upper boundary conditions. In this research, borehole data, electrical resistivity surveying, and modeling of heat and salt diffusion were carried out at Polar Fox Lagoon on the Bykovsky Peninsula, Siberia. Polar Fox Lagoon is a seasonally isolated water body connected to Tiksi Bay through a channel, leading to hypersaline waters under the ice cover. The boreholes in the center of the lagoon revealed floating ice and a saline cryotic bed underlain by a saline cryotic talik, a thin ice-bearing permafrost layer, and unfrozen ground. The bathymetry showed that most of the lagoon had bedfast ice in spring. In bedfast ice areas, the electrical resistivity profiles suggested that an unfrozen saline layer was underlain by a thick layer of refrozen talik. The modeling showed that thermokarst lake taliks can refreeze when submerged in saltwater with mean annual bottom water temperatures below or slightly above 0 degrees C. This occurs, because the top-down chemical degradation of newly formed ice-bearing permafrost is slower than the refreezing of the talik. Hence, lagoons may precondition taliks with a layer of ice-bearing permafrost before encroachment by the sea, and this frozen layer may act as a cap on gas migration out of the underlying talik.}, language = {en} } @article{AngelopoulosWestermannOverduinetal.2019, author = {Angelopoulos, Michael and Westermann, Sebastian and Overduin, Pier Paul and Faguet, Alexey and Olenchenko, Vladimir and Grosse, Guido and Grigoriev, Mikhail N.}, title = {Heat and salt flow in subsea permafrost modeled with CryoGRID2}, series = {Journal of geophysical research : Earth surface}, volume = {124}, journal = {Journal of geophysical research : Earth surface}, number = {4}, publisher = {American Geophysical Union}, address = {Hoboken}, issn = {2169-9003}, doi = {10.1029/2018JF004823}, pages = {920 -- 937}, year = {2019}, abstract = {Thawing of subsea permafrost can impact offshore infrastructure, affect coastal erosion, and release permafrost organic matter. Thawing is usually modeled as the result of heat transfer, although salt diffusion may play an important role in marine settings. To better quantify nearshore subsea permafrost thawing, we applied the CryoGRID2 heat diffusion model and coupled it to a salt diffusion model. We simulated coastline retreat and subsea permafrost evolution as it develops through successive stages of a thawing sequence at the Bykovsky Peninsula, Siberia. Sensitivity analyses for seawater salinity were performed to compare the results for the Bykovsky Peninsula with those of typical Arctic seawater. For the Bykovsky Peninsula, the modeled ice-bearing permafrost table (IBPT) for ice-rich sand and an erosion rate of 0.25m/year was 16.7 m below the seabed 350m offshore. The model outputs were compared to the IBPT depth estimated from coastline retreat and electrical resistivity surveys perpendicular to and crossing the shoreline of the Bykovsky Peninsula. The interpreted geoelectric data suggest that the IBPT dipped to 15-20m below the seabed at 350m offshore. Both results suggest that cold saline water forms beneath grounded ice and floating sea ice in shallow water, causing cryotic benthic temperatures. The freezing point depression produced by salt diffusion can delay or prevent ice formation in the sediment and enhance the IBPT degradation rate. Therefore, salt diffusion may facilitate the release of greenhouse gasses to the atmosphere and considerably affect the design of offshore and coastal infrastructure in subsea permafrost areas.}, language = {en} } @phdthesis{Angermann2018, author = {Angermann, Lisa}, title = {Hillslope-stream connectivity across scales}, doi = {10.25932/publishup-42454}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-424542}, school = {Universit{\"a}t Potsdam}, pages = {xix, 193}, year = {2018}, abstract = {The concept of hydrologic connectivity summarizes all flow processes that link separate regions of a landscape. As such, it is a central theme in the field of catchment hydrology, with influence on neighboring disciplines such as ecology and geomorphology. It is widely acknowledged to be an important key in understanding the response behavior of a catchment and has at the same time inspired research on internal processes over a broad range of scales. From this process-hydrological point of view, hydrological connectivity is the conceptual framework to link local observations across space and scales. This is the context in which the four studies this thesis comprises of were conducted. The focus was on structures and their spatial organization as important control on preferential subsurface flow. Each experiment covered a part of the conceptualized flow path from hillslopes to the stream: soil profile, hillslope, riparian zone, and stream. For each study site, the most characteristic structures of the investigated domain and scale, such as slope deposits and peat layers were identified based on preliminary or previous investigations or literature reviews. Additionally, further structural data was collected and topographical analyses were carried out. Flow processes were observed either based on response observations (soil moisture changes or discharge patterns) or direct measurement (advective heat transport). Based on these data, the flow-relevance of the characteristic structures was evaluated, especially with regard to hillslope to stream connectivity. Results of the four studies revealed a clear relationship between characteristic spatial structures and the hydrological behavior of the catchment. Especially the spatial distribution of structures throughout the study domain and their interconnectedness were crucial for the establishment of preferential flow paths and their relevance for large-scale processes. Plot and hillslope-scale irrigation experiments showed that the macropores of a heterogeneous, skeletal soil enabled preferential flow paths at the scale of centimeters through the otherwise unsaturated soil. These flow paths connected throughout the soil column and across the hillslope and facilitated substantial amounts of vertical and lateral flow through periglacial slope deposits. In the riparian zone of the same headwater catchment, the connectivity between hillslopes and stream was controlled by topography and the dualism between characteristic subsurface structures and the geomorphological heterogeneity of the stream channel. At the small scale (1 m to 10 m) highest gains always occurred at steps along the longitudinal streambed profile, which also controlled discharge patterns at the large scale (100 m) during base flow conditions (number of steps per section). During medium and high flow conditions, however, the impact of topography and parafluvial flow through riparian zone structures prevailed and dominated the large-scale response patterns. In the streambed of a lowland river, low permeability peat layers affected the connectivity between surface water and groundwater, but also between surface water and the hyporheic zone. The crucial factor was not the permeability of the streambed itself, but rather the spatial arrangement of flow-impeding peat layers, causing increased vertical flow through narrow "windows" in contrast to predominantly lateral flow in extended areas of high hydraulic conductivity sediments. These results show that the spatial organization of structures was an important control for hydrological processes at all scales and study areas. In a final step, the observations from different scales and catchment elements were put in relation and compared. The main focus was on the theoretical analysis of the scale hierarchies of structures and processes and the direction of causal dependencies in this context. Based on the resulting hierarchical structure, a conceptual framework was developed which is capable of representing the system's complexity while allowing for adequate simplifications. The resulting concept of the parabolic scale series is based on the insight that flow processes in the terrestrial part of the catchment (soil and hillslopes) converge. This means that small-scale processes assemble and form large-scale processes and responses. Processes in the riparian zone and the streambed, however, are not well represented by the idea of convergence. Here, the large-scale catchment signal arrives and is modified by structures in the riparian zone, stream morphology, and the small-scale interactions between surface water and groundwater. Flow paths diverge and processes can better be represented by proceeding from large scales to smaller ones. The catchment-scale representation of processes and structures is thus the conceptual link between terrestrial hillslope processes and processes in the riparian corridor.}, language = {en} } @article{AngermannJackischAllroggenetal.2017, author = {Angermann, Lisa and Jackisch, Conrad and Allroggen, Niklas and Sprenger, Matthias and Zehe, Erwin and Tronicke, Jens and Weiler, Markus and Blume, Theresa}, title = {Form and function in hillslope hydrology: characterization of subsurface flow based on response observations}, series = {Hydrology and earth system sciences : HESS}, volume = {21}, journal = {Hydrology and earth system sciences : HESS}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1027-5606}, doi = {10.5194/hess-21-3727-2017}, pages = {3727 -- 3748}, year = {2017}, abstract = {The phrase form and function was established in architecture and biology and refers to the idea that form and functionality are closely correlated, influence each other, and co-evolve. We suggest transferring this idea to hydrological systems to separate and analyze their two main characteristics: their form, which is equivalent to the spatial structure and static properties, and their function, equivalent to internal responses and hydrological behavior. While this approach is not particularly new to hydrological field research, we want to employ this concept to explicitly pursue the question of what information is most advantageous to understand a hydrological system. We applied this concept to subsurface flow within a hillslope, with a methodological focus on function: we conducted observations during a natural storm event and followed this with a hillslope-scale irrigation experiment. The results are used to infer hydrological processes of the monitored system. Based on these findings, the explanatory power and conclusiveness of the data are discussed. The measurements included basic hydrological monitoring methods, like piezometers, soil moisture, and discharge measurements. These were accompanied by isotope sampling and a novel application of 2-D time-lapse GPR (ground-penetrating radar). The main finding regarding the processes in the hillslope was that preferential flow paths were established quickly, despite unsaturated conditions. These flow paths also caused a detectable signal in the catchment response following a natural rainfall event, showing that these processes are relevant also at the catchment scale. Thus, we conclude that response observations (dynamics and patterns, i.e., indicators of function) were well suited to describing processes at the observational scale. Especially the use of 2-D time-lapse GPR measurements, providing detailed subsurface response patterns, as well as the combination of stream-centered and hillslope-centered approaches, allowed us to link processes and put them in a larger context. Transfer to other scales beyond observational scale and generalizations, however, rely on the knowledge of structures (form) and remain speculative. The complementary approach with a methodological focus on form (i.e., structure exploration) is presented and discussed in the companion paper by Jackisch et al. (2017).}, language = {en} } @phdthesis{Anis2013, author = {Anis, Muhammad Rehan}, title = {Climate change effects on overland flow}, address = {Potsdam}, pages = {127 S.}, year = {2013}, language = {en} } @article{AnoopPrasadBasavaiahetal.2012, author = {Anoop, A. and Prasad, S. and Basavaiah, Nathani and Brauer, Achim and Shahzad, F. and Deenadayalan, K.}, title = {Tectonic versus climate influence on landscape evolution: A case study from the upper Spiti valley, NW Himalaya}, series = {Geomorphology : an international journal on pure and applied geomorphology}, volume = {145}, journal = {Geomorphology : an international journal on pure and applied geomorphology}, number = {4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0169-555X}, doi = {10.1016/j.geomorph.2011.10.028}, pages = {32 -- 44}, year = {2012}, abstract = {We have undertaken structural, geomorphological, and morphometric analyses to investigate the role of tectonism and climate in the landscape evolution in the upper Spiti valley, NW Himalayas. Geomorphometric analyses coupled with field investigations reveal active tectonic deformation in the Spiti region. The calculated geomorphic indices (steepness, concavity and Hack) demonstrate uplift/subsidence along the Kaurik-Chango fault, whereas transverse topographic index (T-index) reveals basin tilting associated with active faulting near Hansa and Lingti valley. Investigation of well-dated Mane palaeolake sediments also provides evidence of regional tectonic instability. Four episodes (ca. 7.8, 7.4, 6.5 and 6.1 cal ka) of neotectonic activity have been identified during the period of the lake's existence. We have also compiled data on the regional climate variability and compared it with the age of the Mane palaeo-landslide. Our results indicate that the landslide occurred towards the end of the early Holocene intensified monsoon phase and is located near an active fault. Our data on regional tectonic instability and the coincidences of modern and palaeo-landslides with zones of active deformation suggest that tectonism is an important factor governing landscape stability in the Spiti region.}, language = {en} } @article{AnoopPrasadPlessenetal.2013, author = {Anoop, Ambili and Prasad, S. and Plessen, Birgit and Basavaiah, Nathani and Gaye, B. and Naumann, R. and Menzel, P. and Weise, S. and Brauer, Achim}, title = {Palaeoenvironmental implications of evaporative gaylussite crystals from Lonar Lake, central India}, series = {Journal of quaternary science}, volume = {28}, journal = {Journal of quaternary science}, number = {4}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0267-8179}, doi = {10.1002/jqs.2625}, pages = {349 -- 359}, year = {2013}, abstract = {We have undertaken petrographic, mineralogical, geochemical and isotopic investigations on carbonate minerals found within a 10-m-long core from Lonar Lake, central India, with the aim of evaluating their potential as palaeoenvironmental proxies. The core encompasses the entire Holocene and is the first well-dated high-resolution record from central India. While calcite and/or aragonite were found throughout the core, the mineral gaylussite was found only in two specific intervals (46303890 and 2040560 cal a BP). Hydrochemical and isotope data from inflowing streams and lake waters indicate that evaporitic processes play a dominant role in the precipitation of carbonates within this lake. Isotopic (18O and 13C) studies on the evaporative gaylussite crystals and residual bulk carbonates (calcite) from the long core show that evaporation is the major control on 18O enrichment in both the minerals. However, in case of 13C additional mechanisms, for example methanogenesis (gaylussite) and phytoplankton productivity (calcium carbonate), play an additional important role in some intervals. We also discuss the relevance of our investigation for palaeoclimate reconstruction and late Holocene monsoon variability.}, language = {en} } @article{AnoopPrasadKrishnanetal.2013, author = {Anoop, Ambili and Prasad, Sushma and Krishnan, R. and Naumann, Rudolf and Dulski, Peter}, title = {Intensified monsoon and spatiotemporal changes in precipitation patterns in the NW Himalaya during the early-mid holocene}, series = {Quaternary international : the journal of the International Union for Quaternary Research}, volume = {313}, journal = {Quaternary international : the journal of the International Union for Quaternary Research}, publisher = {Elsevier}, address = {Oxford}, issn = {1040-6182}, doi = {10.1016/j.quaint.2013.08.014}, pages = {74 -- 84}, year = {2013}, abstract = {We have undertaken a high resolution palaeoclimate reconstruction on radiocarbon dated palaeolake sediments from the Spiti valley, NW Himalaya. This site lies in the climatically sensitive winter westerlies and Indian Summer Monsoon (ISM) transitional regime and provides an opportunity to reconstruct the precipitation seasonality, and extreme precipitation events that are characterised by intensified erosion. The lake sediments reveal distinct lithofacies that provide evidence of changes in depositional environment and climate during early to mid Holocene (8.7-6.1 cal ka BP). We have identified three stages during the period of lake's existence: the Stage I (8.7-7.6 cal ka BP) is marked by lake establishment; Stage II (similar to 7.6-6.8 cal ka BP) by sustained cooler periods and weakened summer monsoon, and Stage III (similar to 6.8-6.1 cal ka BP) by a shift from colder to warmer climate with stronger ISM. We have identified several short term cooler periods at ca. 8.7, 8.5, 8.3 and 7.2-6.9 cal ka BP. Based on an overview of regional climate records we show that there is an abrupt switch in precipitation seasonality ca. 6.8 cal ka BP that is followed by the onset of the intensified monsoon in the NW Himalaya. (C) 2013 Elsevier Ltd and INQUA. All rights reserved.}, language = {en} } @phdthesis{Antonoglou2024, author = {Antonoglou, Nikolaos}, title = {GNSS-based remote sensing: Innovative observation of key hydrological parameters in the Central Andes}, doi = {10.25932/publishup-62825}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-628256}, school = {Universit{\"a}t Potsdam}, pages = {xxii, 116}, year = {2024}, abstract = {The Central Andean region is characterized by diverse climate zones with sharp transitions between them. In this work, the area of interest is the South-Central Andes in northwestern Argentina that borders with Bolivia and Chile. The focus is the observation of soil moisture and water vapour with Global Navigation Satellite System (GNSS) remote-sensing methodologies. Because of the rapid temporal and spatial variations of water vapour and moisture circulations, monitoring this part of the hydrological cycle is crucial for understanding the mechanisms that control the local climate. Moreover, GNSS-based techniques have previously shown high potential and are appropriate for further investigation. This study includes both logistic-organization effort and data analysis. As for the prior, three GNSS ground stations were installed in remote locations in northwestern Argentina to acquire observations, where there was no availability of third-party data. The methodological development for the observation of the climate variables of soil moisture and water vapour is independent and relies on different approaches. The soil-moisture estimation with GNSS reflectometry is an approximation that has demonstrated promising results, but it has yet to be operationally employed. Thus, a more advanced algorithm that exploits more observations from multiple satellite constellations was developed using data from two pilot stations in Germany. Additionally, this algorithm was slightly modified and used in a sea-level measurement campaign. Although the objective of this application is not related to monitoring hydrological parameters, its methodology is based on the same principles and helps to evaluate the core algorithm. On the other hand, water-vapour monitoring with GNSS observations is a well-established technique that is utilized operationally. Hence, the scope of this study is conducting a meteorological analysis by examining the along-the-zenith air-moisture levels and introducing indices related to the azimuthal gradient. The results of the experiments indicate higher-quality soil moisture observations with the new algorithm. Furthermore, the analysis using the stations in northwestern Argentina illustrates the limits of this technology because of varying soil conditions and shows future research directions. The water-vapour analysis points out the strong influence of the topography on atmospheric moisture circulation and rainfall generation. Moreover, the GNSS time series allows for the identification of seasonal signatures, and the azimuthal-gradient indices permit the detection of main circulation pathways.}, language = {en} } @article{ApaesteguiCruzVuilleetal.2018, author = {Apaestegui, James and Cruz, Francisco William and Vuille, Mathias and Fohlmeister, Jens Bernd and Carlo Espinoza, Jhan and Sifeddine, Abdelfettah and Strikis, Nicolas and Guyot, Jean Loup and Ventura, Roberto and Cheng, Hai and Edwards, R. Lawrence}, title = {Precipitation changes over the eastern Bolivian Andes inferred from speleothem (delta O-18) records for the last 1400 years}, series = {Earth \& planetary science letters}, volume = {494}, journal = {Earth \& planetary science letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-821X}, doi = {10.1016/j.epsl.2018.04.048}, pages = {124 -- 134}, year = {2018}, abstract = {Here we present high-resolution delta O-18 records obtained from speleothems collected in the eastern Bolivian Andes. The stable isotope records are related to the regional- to large-scale atmospheric circulation over South America and allow interpreting changes in delta O-18 during the last 1400 yr as a function of changes in precipitation regimes over the southern tropical Andes. Two distinct phases with more negative delta O-18 values, interpreted as periods of increased convective activity over the eastern Andean Cordillera in Bolivia are observed concomitantly with periods of global climate anomalies during the last millennium, such as the Medieval Climate Anomaly (MCA) and the Little Ice Age (LIA) respectively. Changes in the Bolivian delta O-18 record during the LIA are apparently related to a southward displacement of the Intertropical Convergence Zone (ITCZ), which acts as a main moisture driver to intensify convection over the tropical continent. During the MCA, however, the increased convective activity observed in the Bolivian record is likely the result of a different mechanism, which implies moisture sourced mainly from the southern tropical Atlantic. This interpretation is consistent with paleoclimate records further to the north in the tropical Andes that show progressively drier conditions during this time period, indicating a more northerly position of the ITCZ. The transition period between the MCA and the LIA shows a slight tendency toward increased delta O-18 values, indicating weakened convective activity. Our results also reveal a non-stationary anti-phased behavior between the delta O-18 reconstructions from Bolivia and northeastern Brazil that confirms a continental-scale east-west teleconnection across South America during the LIA.}, language = {en} } @article{AramayoGuzmanHongnetal.2017, author = {Aramayo, Alejandro and Guzman, Silvina and Hongn, Fernando D. and del Papa, Cecilia and Montero-Lopez, Carolina and Sudo, Masafumi}, title = {A Middle Miocene (13.5-12 Ma) deformational event constrained by volcanism along the Puna-Eastern Cordillera border, NW Argentina}, series = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, volume = {703}, journal = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0040-1951}, doi = {10.1016/j.tecto.2017.02.018}, pages = {9 -- 22}, year = {2017}, abstract = {The features of Middle Miocene deposits in the Puna-Eastern Cordillera transition (Valles Calchaquies) indicate that Cenozoic deformation, sedimentation and volcanism follow a complex spatiotemporal relationship. The intense volcanic activity recorded in the eastern Puna border between 14 and 11.5 Ma coincides with the occurrence of one of the most important deformation events of the Neogene tectonic evolution in the region. Studies performed across the Puna-Eastern Cordillera transition show different relationships between volcanic deposits of ca. 13.5-12.1 Ma and the Oligocene-Miocene Angastaco Formation. In this paper we describe the ash-flow tuff deposits which are the first of this type found concordant in the sedimentary fill of Valles Calchaquies. Several analyses performed on these pyroclastic deposits allow a correlation to be made with the Alto de Las Lagunas Ignimbrite (ca. 13.5 Ma) of the Pucarilla-Cerro Tipillas Volcanic Complex located in the Puna. Outcrops of the ca. 13.5 Ma pyroclastic deposits are recognised within the Puna and the Valle Calchaqui. However, in the southern prolongation of the Valle de Hualfin (Tiopampa-Pucarilla depression) that separates the Puna from the Valle Calchaqui at these latitudes, these deposits are partially eroded and buried, and thus their occurrence is recorded only by abundant volcanic clasts included in conglomerates of the Angastaco Formation. The sedimentation of the Angastaco Formation was aborted at ca. 12 Ma in the Tiopampa-Pucarilla depression by the Pucarilla Ignimbrite, which unconformably covers the synorogenic units. On the contrary, in the Valle Calchaqui the sedimentation of the Angastaco Formation continued until the Late Miocene. The different relationships between the Miocene Angastaco Formation and the ignimbrites with ages of ca. 13.5 and ca. 12 Ma reveal that in this short period (-1.5 m.y.) a significant deformation event took place and resulted in marked palaeogeographic changes, as evidenced by stratigraphic-sedimentological and chronological records in the Angastaco Formation. (C) 2017 Elsevier B.V. All rights reserved.}, language = {en} } @article{ArayaVargasMeqbelRitteretal.2019, author = {Araya Vargas, Jaime Andr{\´e}s and Meqbel, Naser M. and Ritter, Oliver and Brasse, H. and Weckmann, Ute and Yanez, Gonzalo and Godoy, B.}, title = {Fluid Distribution in the Central Andes Subduction Zone Imaged With Magnetotellurics}, series = {Journal of geophysical research : Solid earth}, volume = {124}, journal = {Journal of geophysical research : Solid earth}, number = {4}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9313}, doi = {10.1029/2018JB016933}, pages = {4017 -- 4034}, year = {2019}, abstract = {We present a model of the electrical resistivity structure of the lithosphere in the Central Andes between 20 degrees and 24 degrees S from 3-D inversion of 56 long-period magnetotelluric sites. Our model shows a complex resistivity structure with significant variability parallel and perpendicular to the trench direction. The continental forearc is characterized mainly by high electrical resistivity (>1,000m), suggesting overall low volumes of fluids. However, low resistivity zones (LRZs, <5m) were found in the continental forearc below areas where major trench-parallel faults systems intersect NW-SE transverse faults. Forearc LRZs indicate circulation and accumulation of fluids in highly permeable fault zones. The continental crust along the arc shows three distinctive resistivity domains, which coincide with segmentation in the distribution of volcanoes. The northern domain (20 degrees-20.5 degrees S) is characterized by resistivities >1,000m and the absence of active volcanism, suggesting the presence of a low-permeability block in the continental crust. The central domain (20.5 degrees-23 degrees S) exhibits a number of LRZs at varying depths, indicating different levels of a magmatic plumbing system. The southern domain (23 degrees-24 degrees S) is characterized by resistivities >1,000m, suggesting the absence of large magma reservoirs below the volcanic chain at crustal depths. Magma reservoirs located below the base of the crust or in the backarc may fed active volcanism in the southern domain. In the subcontinental mantle, the model exhibits LRZs in the forearc mantle wedge and above clusters of intermediate-depth seismicity, likely related to fluids produced by serpentinization of the mantle and eclogitization of the slab, respectively.}, language = {en} } @phdthesis{ArboledaZapata2023, author = {Arboleda Zapata, Mauricio}, title = {Adapted inversion strategies for electrical resistivity data to explore layered near-surface environments}, doi = {10.25932/publishup-58135}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-581357}, school = {Universit{\"a}t Potsdam}, pages = {115}, year = {2023}, abstract = {The electrical resistivity tomography (ERT) method is widely used to investigate geological, geotechnical, and hydrogeological problems in inland and aquatic environments (i.e., lakes, rivers, and seas). The objective of the ERT method is to obtain reliable resistivity models of the subsurface that can be interpreted in terms of the subsurface structure and petrophysical properties. The reliability of the resulting resistivity models depends not only on the quality of the acquired data, but also on the employed inversion strategy. Inversion of ERT data results in multiple solutions that explain the measured data equally well. Typical inversion approaches rely on different deterministic (local) strategies that consider different smoothing and damping strategies to stabilize the inversion. However, such strategies suffer from the trade-off of smearing possible sharp subsurface interfaces separating layers with resistivity contrasts of up to several orders of magnitude. When prior information (e.g., from outcrops, boreholes, or other geophysical surveys) suggests sharp resistivity variations, it might be advantageous to adapt the parameterization and inversion strategies to obtain more stable and geologically reliable model solutions. Adaptations to traditional local inversions, for example, by using different structural and/or geostatistical constraints, may help to retrieve sharper model solutions. In addition, layer-based model parameterization in combination with local or global inversion approaches can be used to obtain models with sharp boundaries. In this thesis, I study three typical layered near-surface environments in which prior information is used to adapt 2D inversion strategies to favor layered model solutions. In cooperation with the coauthors of Chapters 2-4, I consider two general strategies. Our first approach uses a layer-based model parameterization and a well-established global inversion strategy to generate ensembles of model solutions and assess uncertainties related to the non-uniqueness of the inverse problem. We apply this method to invert ERT data sets collected in an inland coastal area of northern France (Chapter~2) and offshore of two Arctic regions (Chapter~3). Our second approach consists of using geostatistical regularizations with different correlation lengths. We apply this strategy to a more complex subsurface scenario on a local intermountain alluvial fan in southwestern Germany (Chapter~4). Overall, our inversion approaches allow us to obtain resistivity models that agree with the general geological understanding of the studied field sites. These strategies are rather general and can be applied to various geological environments where a layered subsurface structure is expected. The flexibility of our strategies allows adaptations to invert other kinds of geophysical data sets such as seismic refraction or electromagnetic induction methods, and could be considered for joint inversion approaches.}, language = {en} } @misc{ArboledaZapataAngelopoulosOverduinetal.2022, author = {Arboleda-Zapata, Mauricio and Angelopoulos, Michael and Overduin, Pier Paul and Grosse, Guido and Jones, Benjamin M. and Tronicke, Jens}, title = {Exploring the capabilities of electrical resistivity tomography to study subsea permafrost}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1285}, issn = {1866-8372}, doi = {10.25932/publishup-57123}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571234}, pages = {4423 -- 4445}, year = {2022}, abstract = {Sea level rise and coastal erosion have inundated large areas of Arctic permafrost. Submergence by warm and saline waters increases the rate of inundated permafrost thaw compared to sub-aerial thawing on land. Studying the contact between the unfrozen and frozen sediments below the seabed, also known as the ice-bearing permafrost table (IBPT), provides valuable information to understand the evolution of sub-aquatic permafrost, which is key to improving and understanding coastal erosion prediction models and potential greenhouse gas emissions. In this study, we use data from 2D electrical resistivity tomography (ERT) collected in the nearshore coastal zone of two Arctic regions that differ in their environmental conditions (e.g., seawater depth and resistivity) to image and study the subsea permafrost. The inversion of 2D ERT data sets is commonly performed using deterministic approaches that favor smoothed solutions, which are typically interpreted using a user-specified resistivity threshold to identify the IBPT position. In contrast, to target the IBPT position directly during inversion, we use a layer-based model parameterization and a global optimization approach to invert our ERT data. This approach results in ensembles of layered 2D model solutions, which we use to identify the IBPT and estimate the resistivity of the unfrozen and frozen sediments, including estimates of uncertainties. Additionally, we globally invert 1D synthetic resistivity data and perform sensitivity analyses to study, in a simpler way, the correlations and influences of our model parameters. The set of methods provided in this study may help to further exploit ERT data collected in such permafrost environments as well as for the design of future field experiments.}, language = {en} } @article{ArboledaZapataAngelopoulosOverduinetal.2022, author = {Arboleda-Zapata, Mauricio and Angelopoulos, Michael and Overduin, Pier Paul and Grosse, Guido and Jones, Benjamin M. and Tronicke, Jens}, title = {Exploring the capabilities of electrical resistivity tomography to study subsea permafrost}, series = {The Cryosphere}, volume = {16}, journal = {The Cryosphere}, publisher = {Copernicus}, address = {Katlenburg-Lindau}, issn = {1994-0424}, doi = {10.5194/tc-16-4423-2022}, pages = {4423 -- 4445}, year = {2022}, abstract = {Sea level rise and coastal erosion have inundated large areas of Arctic permafrost. Submergence by warm and saline waters increases the rate of inundated permafrost thaw compared to sub-aerial thawing on land. Studying the contact between the unfrozen and frozen sediments below the seabed, also known as the ice-bearing permafrost table (IBPT), provides valuable information to understand the evolution of sub-aquatic permafrost, which is key to improving and understanding coastal erosion prediction models and potential greenhouse gas emissions. In this study, we use data from 2D electrical resistivity tomography (ERT) collected in the nearshore coastal zone of two Arctic regions that differ in their environmental conditions (e.g., seawater depth and resistivity) to image and study the subsea permafrost. The inversion of 2D ERT data sets is commonly performed using deterministic approaches that favor smoothed solutions, which are typically interpreted using a user-specified resistivity threshold to identify the IBPT position. In contrast, to target the IBPT position directly during inversion, we use a layer-based model parameterization and a global optimization approach to invert our ERT data. This approach results in ensembles of layered 2D model solutions, which we use to identify the IBPT and estimate the resistivity of the unfrozen and frozen sediments, including estimates of uncertainties. Additionally, we globally invert 1D synthetic resistivity data and perform sensitivity analyses to study, in a simpler way, the correlations and influences of our model parameters. The set of methods provided in this study may help to further exploit ERT data collected in such permafrost environments as well as for the design of future field experiments.}, language = {en} } @article{ArboledaZapataGuillemoteauTronicke2022, author = {Arboleda-Zapata, Mauricio and Guillemoteau, Julien and Tronicke, Jens}, title = {A comprehensive workflow to analyze ensembles of globally inverted 2D electrical resistivity models}, series = {Journal of applied geophysics}, volume = {196}, journal = {Journal of applied geophysics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0926-9851}, doi = {10.1016/j.jappgeo.2021.104512}, pages = {12}, year = {2022}, abstract = {Electrical resistivity tomography (ERT) aims at imaging the subsurface resistivity distribution and provides valuable information for different geological, engineering, and hydrological applications. To obtain a subsurface resistivity model from measured apparent resistivities, stochastic or deterministic inversion procedures may be employed. Typically, the inversion of ERT data results in non-unique solutions; i.e., an ensemble of different models explains the measured data equally well. In this study, we perform inference analysis of model ensembles generated using a well-established global inversion approach to assess uncertainties related to the nonuniqueness of the inverse problem. Our interpretation strategy starts by establishing model selection criteria based on different statistical descriptors calculated from the data residuals. Then, we perform cluster analysis considering the inverted resistivity models and the corresponding data residuals. Finally, we evaluate model uncertainties and residual distributions for each cluster. To illustrate the potential of our approach, we use a particle swarm optimization (PSO) algorithm to obtain an ensemble of 2D layer-based resistivity models from a synthetic data example and a field data set collected in Loon-Plage, France. Our strategy performs well for both synthetic and field data and allows us to extract different plausible model scenarios with their associated uncertainties and data residual distributions. Although we demonstrate our workflow using 2D ERT data and a PSObased inversion approach, the proposed strategy is general and can be adapted to analyze model ensembles generated from other kinds of geophysical data and using different global inversion approaches.}, language = {en} } @article{ArcayDoinTricetal.2006, author = {Arcay, Diane and Doin, Marie Pierre and Tric, Emmanuel and Bousquet, Romain and de Capitani, Christian}, title = {Overriding plate thinning in subduction zones : localized convection induced by slab dehydration}, issn = {1525-2027}, doi = {10.1029/2005gc001061}, year = {2006}, abstract = {In subduction zones, many observations indicate that the backarc thermal state is particularly hot and that the upper lithosphere is thin, even if no recent extension episode has occurred. This might result from free thermal convection favored by low viscosities in the hydrated mantle wedge. We perform 2-D numerical experiments of the convective mantle wedge interaction with both the downgoing slab and the overriding plate to test this hypothesis, explore its physical mechanism, and assess its dependencies on some relevant rock properties. Water transfers across the subducting plate and the mantle wedge are explicitly modeled by including in the calculation realistic hydration/ dehydration reaction boundaries for a water-saturated mantle and oceanic crust. The rheology is non-Newtonian and temperature-, pressure-, and water content-dependent. For low strength reduction associated to water content, the upper plate is locally thinned by an enhanced corner flow. For larger strength reductions, small convection cells rapidly thin the upper plate ( in less than 15 Myr) over the area in the overriding lithosphere hydrated by slab-derived water fluxes. As a result, the thinned region location depends on the subducting plate thermal state, and it increases with high convergence rates and low subduction dip angles. Other simulations are performed to test the sole effect of hydrous rock weakening on the upper plate/mantle convective interaction. They show that the thinning process is not influenced by the corner flow, but develops at the favor of a decoupling level induced by the formation of hydroxylated minerals inside the hydrated lithosphere. The erosion mechanism identified in these simulations allows us to explain the characteristic duration of erosion as a function of the hydrous strength reduction. We find that the presence of amphibole in the upper lithosphere in significant proportions is required down to a temperature of about 980 degrees C, corresponding to an initial depth of similar to 70 km, to strongly decrease the strength of the base of the lithosphere and trigger a rapid erosion (< 15 Myr).}, language = {en} } @article{AriagnoLeBouteillervanderBeeketal.2022, author = {Ariagno, Coline and Le Bouteiller, Caroline and van der Beek, Pieter A. and Klotz, S{\´e}bastien}, title = {Sediment export in marly badland catchments modulated by frost-cracking intensity, Draix-Bl{\´e}one Critical Zone Observatory, SE France}, series = {Earth surface dynamics : ESURF ; an interactive open access journal of the European Geosciences Union}, volume = {10}, journal = {Earth surface dynamics : ESURF ; an interactive open access journal of the European Geosciences Union}, number = {1}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {2196-6311}, doi = {10.5194/esurf-10-81-2022}, pages = {81 -- 96}, year = {2022}, abstract = {At the interface between the lithosphere and the atmosphere, the critical zone records the complex interactions between erosion, climate, geologic substrate, and life and can be directly monitored. Long data records (30 consecutive years for sediment yields) collected in the sparsely vegetated, steep, and small marly badland catchments of the Draix-Bleone Critical Zone Observatory (CZO), SE France, allow analyzing potential climatic controls on regolith dynamics and sediment export. Although widely accepted as a first-order control, rainfall variability does not fully explain the observed interannual variability in sediment export. Previous studies in this area have suggested that frost-weathering processes could drive regolith production and potentially modulate the observed pattern of sediment export. Here, we define sediment export anomalies as the residuals from a predictive model with annual rainfall intensity above a threshold as the control. We then use continuous soil temperature data recorded at different locations over multiple years to highlight the role of different frost-weathering processes (i.e., ice segregation versus volumetric expansion) in regolith production. Several proxies for different frost-weathering processes have been calculated from these data and compared to the sediment export anomalies, with careful consideration of field data quality. Our results suggest that frost-cracking intensity (linked to ice segregation) can explain about half (47 \%-64 \%) of the sediment export anomalies. In contrast, the number of freeze-thaw cycles (linked to volumetric expansion) has only a minor impact on catchment sediment response. The time spent below 0 degrees C also correlates well with the sediment export anomalies and requires fewer field data to be calculated than the frost-cracking intensity. Thus, frost-weathering processes modulate sediment export by controlling regolith production in these catchments and should be taken into account when building predictive models of sediment export from these badlands under a changing climate.}, language = {en} } @article{ArmbrusterBermanceZebecetal.1998, author = {Armbruster, Thomas and Bermance, V. and Zebec, M. and Oberh{\"a}nsli, Roland}, title = {Titanium and iron poor zincoh{\"o}gbomite-16H, Zn14(al,Fe3+,Ti,Mg)8Al24O62(OH)2, from Nezilovo, Macedonia: occurrence and crystal structure of a new polysome}, year = {1998}, language = {en} } @article{ArmstrongRadouskyAustinetal.2022, author = {Armstrong, Michael R. and Radousky, Harry B. and Austin, Ryan A. and Tschauner, Oliver and Brown, Shaughnessy and Gleason, Arianna E. and Goldman, Nir and Granados, Eduardo and Grivickas, Paulius and Holtgrewe, Nicholas and Kroonblawd, Matthew P. and Lee, Hae Ja and Lobanov, Sergey and Nagler, Bob and Nam, Inhyuk and Prakapenka, Vitali and Prescher, Clemens and Reed, Evan J. and Stavrou, Elissaios and Walter, Peter and Goncharov, Alexander F. and Belof, Jonathan L.}, title = {Highly ordered graphite (HOPG) to hexagonal diamond (lonsdaleite) phase transition observed on picosecond time scales using ultrafast x-ray diffraction}, series = {Journal of applied physics}, volume = {132}, journal = {Journal of applied physics}, number = {5}, publisher = {AIP Publishing}, address = {Melville}, issn = {0021-8979}, doi = {10.1063/5.0085297}, pages = {10}, year = {2022}, abstract = {The response of rapidly compressed highly oriented pyrolytic graphite (HOPG) normal to its basal plane was investigated at a pressure of \& SIM;80 GPa. Ultrafast x-ray diffraction using \& SIM;100 fs pulses at the Materials Under Extreme Conditions sector of the Linac Coherent Light Source was used to probe the changes in crystal structure resulting from picosecond timescale compression at laser drive energies ranging from 2.5 to 250 mJ. A phase transformation from HOPG to a highly textured hexagonal diamond structure is observed at the highest energy, followed by relaxation to a still highly oriented, but distorted graphite structure following release. We observe the formation of a highly oriented lonsdaleite within 20 ps, subsequent to compression. This suggests that a diffusionless martensitic mechanism may play a fundamental role in phase transition, as speculated in an early work on this system, and more recent static studies of diamonds formed in impact events. Published by AIP Publishing.}, language = {en} } @article{ArnousZeckraVenerdinietal.2020, author = {Arnous, Ahmad and Zeckra, Martin and Venerdini, Agostina and Alvarado, Patricia and Arrowsmith, Ram{\´o}n and Guillemoteau, Julien and Landgraf, Angela and Guti{\´e}rrez, Adolfo Antonio and Strecker, Manfred}, title = {Neotectonic Activity in the Low-Strain Broken Foreland (Santa B{\´a}rbara System) of the North-Western Argentinean Andes (26°S)}, series = {Lithosphere}, volume = {2020}, journal = {Lithosphere}, number = {1}, publisher = {GSA}, address = {Boulder, Colo.}, issn = {1947-4253}, doi = {10.2113/2020/8888588}, pages = {1 -- 25}, year = {2020}, abstract = {Uplift in the broken Andean foreland of the Argentine Santa B{\´a}rbara System (SBS) is associated with the contractional reactivation of basement anisotropies, similar to those reported from the thick-skinned Cretaceous-Eocene Laramide province of North America. Fault scarps, deformed Quaternary deposits and landforms, disrupted drainage patterns, and medium-sized earthquakes within the SBS suggest that movement along these structures may be a recurring phenomenon, with yet to be defined repeat intervals and rupture lengths. In contrast to the Subandes thrust belt farther north, where eastward-migrating deformation has generated a well-defined thrust front, the SBS records spatiotemporally disparate deformation along structures that are only known to the first order. We present herein the results of geomorphic desktop analyses, structural field observations, and 2D electrical resistivity tomography and seismic-refraction tomography surveys and an interpretation of seismic reflection profiles across suspected fault scarps in the sedimentary basins adjacent to the Candelaria Range (CR) basement uplift, in the south-central part of the SBS. Our analysis in the CR piedmont areas reveals consistency between the results of near-surface electrical resistivity and seismic-refraction tomography surveys, the locations of prominent fault scarps, and structural geometries at greater depth imaged by seismic reflection data. We suggest that this deformation is driven by deep-seated blind thrusting beneath the CR and associated regional warping, while shortening involving Mesozoic and Cenozoic sedimentary strata in the adjacent basins was accommodated by layer-parallel folding and flexural-slip faults that cut through Quaternary landforms and deposits at the surface.}, language = {en} } @misc{ArnousZeckraVenerdinietal.2020, author = {Arnous, Ahmad and Zeckra, Martin and Venerdini, Agostina and Alvarado, Patricia and Arrowsmith, Ram{\´o}n and Guillemoteau, Julien and Landgraf, Angela and Guti{\´e}rrez, Adolfo Antonio and Strecker, Manfred}, title = {Neotectonic Activity in the Low-Strain Broken Foreland (Santa B{\´a}rbara System) of the North-Western Argentinean Andes (26°S)}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, number = {1008}, issn = {1866-8372}, doi = {10.25932/publishup-48018}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-480183}, pages = {1 -- 25}, year = {2020}, abstract = {Uplift in the broken Andean foreland of the Argentine Santa B{\´a}rbara System (SBS) is associated with the contractional reactivation of basement anisotropies, similar to those reported from the thick-skinned Cretaceous-Eocene Laramide province of North America. Fault scarps, deformed Quaternary deposits and landforms, disrupted drainage patterns, and medium-sized earthquakes within the SBS suggest that movement along these structures may be a recurring phenomenon, with yet to be defined repeat intervals and rupture lengths. In contrast to the Subandes thrust belt farther north, where eastward-migrating deformation has generated a well-defined thrust front, the SBS records spatiotemporally disparate deformation along structures that are only known to the first order. We present herein the results of geomorphic desktop analyses, structural field observations, and 2D electrical resistivity tomography and seismic-refraction tomography surveys and an interpretation of seismic reflection profiles across suspected fault scarps in the sedimentary basins adjacent to the Candelaria Range (CR) basement uplift, in the south-central part of the SBS. Our analysis in the CR piedmont areas reveals consistency between the results of near-surface electrical resistivity and seismic-refraction tomography surveys, the locations of prominent fault scarps, and structural geometries at greater depth imaged by seismic reflection data. We suggest that this deformation is driven by deep-seated blind thrusting beneath the CR and associated regional warping, while shortening involving Mesozoic and Cenozoic sedimentary strata in the adjacent basins was accommodated by layer-parallel folding and flexural-slip faults that cut through Quaternary landforms and deposits at the surface.}, language = {en} } @misc{AroduduHelmingWiggeringetal.2017, author = {Arodudu, Oludunsin Tunrayo and Helming, Katharina and Wiggering, Hubert and Voinov, Alexey}, title = {Bioenergy from low-intensity agricultural systems}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400403}, pages = {18}, year = {2017}, abstract = {In light of possible future restrictions on the use of fossil fuel, due to climate change obligations and continuous depletion of global fossil fuel reserves, the search for alternative renewable energy sources is expected to be an issue of great concern for policy stakeholders. This study assessed the feasibility of bioenergy production under relatively low-intensity conservative, eco-agricultural settings (as opposed to those produced under high-intensity, fossil fuel based industrialized agriculture). Estimates of the net energy gain (NEG) and the energy return on energy invested (EROEI) obtained from a life cycle inventory of the energy inputs and outputs involved reveal that the energy efficiency of bioenergy produced in low-intensity eco-agricultural systems could be as much as much as 448.5-488.3 GJ·ha-1 of NEG and an EROEI of 5.4-5.9 for maize ethanol production systems, and as much as 155.0-283.9 GJ·ha-1 of NEG and an EROEI of 14.7-22.4 for maize biogas production systems. This is substantially higher than for industrialized agriculture with a NEG of 2.8-52.5 GJ·ha-1 and an EROEI of 1.2-1.7 for maize ethanol production systems, as well as a NEG of 59.3-188.7 GJ·ha-1 and an EROEI of 2.2-10.2 for maize biogas production systems. Bioenergy produced in low-intensity eco-agricultural systems could therefore be an important source of energy with immense net benefits for local and regional end-users, provided a more efficient use of the co-products is ensured.}, language = {en} } @article{ArrowsmithCrosbyKorzhenkovetal.2017, author = {Arrowsmith, J. Ramon and Crosby, Christopher J. and Korzhenkov, Andrey M. and Mamyrov, Ernest and Povolotskaya, Irina and Guralnik, Benny and Landgraf, Angela}, title = {Surface rupture of the 1911 Kebin (Chon-Kemin) earthquake, Northern Tien Shan, Kyrgyzstan}, series = {Seismicity, fault rupture and earthquake hazards in slowly deforming regions}, volume = {432}, journal = {Seismicity, fault rupture and earthquake hazards in slowly deforming regions}, publisher = {The Geological Society}, address = {London}, isbn = {978-1-86239-745-3}, issn = {0305-8719}, doi = {10.1144/SP432.10}, pages = {233 -- 253}, year = {2017}, abstract = {The 1911 Chon-Kemin (Kebin) earthquake culminated c. 30 years of remarkable earthquakes in the northern Tien Shan (Kyrgyzstan and Kazakhstan). Building on prior mapping of the event, we traced its rupture in the field and measured more than 50 offset landforms. Cumulative fault rupture length is >155-195 km along 13 fault patches comprising six sections. The patches are separated by changes of dip magnitude or dip direction, or by 4-10 km-wide stepovers. One <40 km section overlaps and is parallel to the main north-dipping rupture but is 7 km north and dips opposite (south). Both ends of the rupture are along mountain front thrust faults demonstrating late Quaternary activity. We computed the moment from each fault patch using the surface fault traces, dip inferred from the traces, 20 km seismogenic thickness, rigidity of 3.3 x 10(10) N m(-2) and dip slip converted from our observations of the largely reverse sense of motion vertical offsets. The discontinuous patches with c. 3-4 m average slip and peak slip of <14 m yield a seismic moment of 4.6 x 10(20) Nm (M-w 7.78) to 7.4 x 10(20) Nm (M-w 7.91). The majority of moment was released along the inner eastern rupture segments. This geological moment is lower by a factor of 1.5 from that determined from teleseismic data.}, language = {en} } @article{ArrowsmithStrecker1999, author = {Arrowsmith, J. Ram{\´o}n and Strecker, Manfred}, title = {Seismotectonic range-front segmentation and mountain-belt growth in the Pamir-Alai region, Kyrgyzstan (India- Eurasia collision zone)}, year = {1999}, language = {en} } @article{AsariWardinski2018, author = {Asari, Seiki and Wardinski, Ingo}, title = {Interannual fluctuations of the core angular momentum inferred from geomagnetic field models}, series = {Magnetic Fields in the Solar System : Planets, Moons and Solar Wind Interactions}, volume = {448}, journal = {Magnetic Fields in the Solar System : Planets, Moons and Solar Wind Interactions}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-3-319-64292-5}, issn = {0067-0057}, doi = {10.1007/978-3-319-64292-5_4}, pages = {111 -- 123}, year = {2018}, language = {en} } @article{AseevShpritsWangetal.2019, author = {Aseev, Nikita and Shprits, Yuri Y. and Wang, Dedong and Wygant, John and Drozdov, Alexander and Kellerman, Adam C. and Reeves, Geoffrey D.}, title = {Transport and loss of ring current electrons inside geosynchronous orbit during the 17 March 2013 storm}, series = {Journal of geophysical research : Space physics}, volume = {124}, journal = {Journal of geophysical research : Space physics}, number = {2}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9380}, doi = {10.1029/2018JA026031}, pages = {915 -- 933}, year = {2019}, abstract = {Ring current electrons (1-100 keV) have received significant attention in recent decades, but many questions regarding their major transport and loss mechanisms remain open. In this study, we use the four-dimensional Versatile Electron Radiation Belt code to model the enhancement of phase space density that occurred during the 17 March 2013 storm. Our model includes global convection, radial diffusion, and scattering into the Earth's atmosphere driven by whistler-mode hiss and chorus waves. We study the sensitivity of the model to the boundary conditions, global electric field, the electric field associated with subauroral polarization streams, electron loss rates, and radial diffusion coefficients. The results of the code are almost insensitive to the model parameters above 4.5 RERE, which indicates that the general dynamics of the electrons between 4.5 RE and the geostationary orbit can be explained by global convection. We found that the major discrepancies between the model and data can stem from the inaccurate electric field model and uncertainties in lifetimes. We show that additional mechanisms that are responsible for radial transport are required to explain the dynamics of ≥40-keV electrons, and the inclusion of the radial diffusion rates that are typically assumed in radiation belt studies leads to a better agreement with the data. The overall effect of subauroral polarization streams on the electron phase space density profiles seems to be smaller than the uncertainties in other input parameters. This study is an initial step toward understanding the dynamics of these particles inside the geostationary orbit.}, language = {en} } @article{AsgarimehrWickertReich2018, author = {Asgarimehr, Milad and Wickert, Jens and Reich, Sebastian}, title = {TDS-1 GNSS Reflectometry}, series = {IEEE journal of selected topics in applied earth observations and remote sensing}, volume = {11}, journal = {IEEE journal of selected topics in applied earth observations and remote sensing}, number = {11}, publisher = {Inst. of Electr. and Electronics Engineers}, address = {Piscataway}, issn = {1939-1404}, doi = {10.1109/JSTARS.2018.2873241}, pages = {4534 -- 4541}, year = {2018}, abstract = {This study presents the development and a systematic evaluation study of GNSS reflectometry wind speeds. After establishing a wind speed retrieval algorithm, UK TechDemoSat-1 (TDS-1) derived winds, from May 2015 to July 2017, are compared to the Advanced Scatterometer (ASCAT). ERA-Interim wind fields of the European Centre for Medium-range Weather Forecasts (ECMWF) and in situ observation from Tropical Atmosphere Ocean buoy array in the Pacific are taken as reference. One-year averaged TDS-1 global winds demonstrate small differences with ECMWF in a majority of areas as well as discuss under- and overestimations. The pioneering TDS-1 winds demonstrate a root-mean-squared error (RMSE) and bias of 2.77 and -0.33 m/s, which are comparable to the RMSE and bias derived by ASCAT winds, as large as 2.31 and 0.25 m/s, respectively. Using buoys measurements as reference, RMSE and bias of 2.23 and -0.03 m/s for TDS-1 as well as 1.40 and -0.68 m/s for ASCAT are obtained. Utilizing rain microwave-infrared estimates of the Tropical Rainfall Measuring Mission, rain-affected observation of both ASCAT and TDS-1 are collected and evaluated. Although ASCAT winds show a significant performance degradation resulting in an RMSE and bias of 3.16 and 1.03 m/s, respectively, during rain condition, TDS-1 shows a more reliable performance with an RMSE and bias of 2.94 and -0.21 m/s, respectively, which indicates the promising capability of GNSS forward scattering for wind retrievals during rain. A decrease in TDS-1-derived bistatic radar cross sections during rain events, at weak winds, is also demonstrated.}, language = {en} } @article{AsgarimehrWickertReich2019, author = {Asgarimehr, Milad and Wickert, Jens and Reich, Sebastian}, title = {Evaluating impact of rain attenuation on space-borne GNSS reflectometry wind speeds}, series = {Remote Sensing}, volume = {11}, journal = {Remote Sensing}, number = {9}, publisher = {MDPI}, address = {Basel}, issn = {2072-4292}, doi = {10.3390/rs11091048}, pages = {18}, year = {2019}, abstract = {The novel space-borne Global Navigation Satellite System Reflectometry (GNSS-R) technique has recently shown promise in monitoring the ocean state and surface wind speed with high spatial coverage and unprecedented sampling rate. The L-band signals of GNSS are structurally able to provide a higher quality of observations from areas covered by dense clouds and under intense precipitation, compared to those signals at higher frequencies from conventional ocean scatterometers. As a result, studying the inner core of cyclones and improvement of severe weather forecasting and cyclone tracking have turned into the main objectives of GNSS-R satellite missions such as Cyclone Global Navigation Satellite System (CYGNSS). Nevertheless, the rain attenuation impact on GNSS-R wind speed products is not yet well documented. Evaluating the rain attenuation effects on this technique is significant since a small change in the GNSS-R can potentially cause a considerable bias in the resultant wind products at intense wind speeds. Based on both empirical evidence and theory, wind speed is inversely proportional to derived bistatic radar cross section with a natural logarithmic relation, which introduces high condition numbers (similar to ill-posed conditions) at the inversions to high wind speeds. This paper presents an evaluation of the rain signal attenuation impact on the bistatic radar cross section and the derived wind speed. This study is conducted simulating GNSS-R delay-Doppler maps at different rain rates and reflection geometries, considering that an empirical data analysis at extreme wind intensities and rain rates is impossible due to the insufficient number of observations from these severe conditions. Finally, the study demonstrates that at a wind speed of 30 m/s and incidence angle of 30 degrees, rain at rates of 10, 15, and 20 mm/h might cause overestimation as large as approximate to 0.65 m/s (2\%), 1.00 m/s (3\%), and 1.3 m/s (4\%), respectively, which are still smaller than the CYGNSS required uncertainty threshold. The simulations are conducted in a pessimistic condition (severe continuous rainfall below the freezing height and over the entire glistening zone) and the bias is expected to be smaller in size in real environments.}, language = {en} } @article{AsgarimehrZavorotnyWickertetal.2018, author = {Asgarimehr, Milad and Zavorotny, Valery and Wickert, Jens and Reich, Sebastian}, title = {Can GNSS Reflectometry Detect Precipitation Over Oceans?}, series = {Geophysical research letters}, volume = {45}, journal = {Geophysical research letters}, number = {22}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1029/2018GL079708}, pages = {12585 -- 12592}, year = {2018}, abstract = {For the first time, a rain signature in Global Navigation Satellite System Reflectometry (GNSS-R) observations is demonstrated. Based on the argument that the forward quasi-specular scattering relies upon surface gravity waves with lengths larger than several wavelengths of the reflected signal, a commonly made conclusion is that the scatterometric GNSS-R measurements are not sensitive to the surface small-scale roughness generated by raindrops impinging on the ocean surface. On the contrary, this study presents an evidence that the bistatic radar cross section sigma(0) derived from TechDemoSat-1 data is reduced due to rain at weak winds, lower than approximate to 6 m/s. The decrease is as large as approximate to 0.7 dB at the wind speed of 3 m/s due to a precipitation of 0-2 mm/hr. The simulations based on the recently published scattering theory provide a plausible explanation for this phenomenon which potentially enables the GNSS-R technique to detect precipitation over oceans at low winds.}, language = {en} } @article{AshastinaKuzminaRudayaetal.2018, author = {Ashastina, Kseniia and Kuzmina, Svetlana and Rudaya, Natalia and Troeva, Elena I. and Schoch, Werner H. and Roemermann, Christine and Reinecke, Jennifer and Otte, Volker and Savvinov, Grigoriy and Wesche, Karsten and Kienast, Frank}, title = {Woodlands and steppes}, series = {Quaternary science reviews : the international multidisciplinary research and review journal}, volume = {196}, journal = {Quaternary science reviews : the international multidisciplinary research and review journal}, publisher = {Elsevier}, address = {Oxford}, issn = {0277-3791}, doi = {10.1016/j.quascirev.2018.07.032}, pages = {38 -- 61}, year = {2018}, abstract = {Based on fossil organism remains including plant macrofossils, charcoal, pollen, and invertebrates preserved in syngenetic deposits of the Batagay permafrost sequence in the Siberian Yana Highlands, we reconstructed the environmental history during marine isotope stages (MIS) 6 to 2. Two fossil assemblages, exceptionally rich in plant remains, allowed for a detailed description of the palaeo-vegetation during two climate extremes of the Late Pleistocene, the onset of the last glacial maximum (LGM) and the last interglacial. In addition, altogether 41 assemblages were used to outline the vegetation history since the penultimate cold stage of MIS 6. Accordingly, meadow steppes analogue to modern communities of the phytosociological order Festucetalia lenensis formed the primary vegetation during the Saalian and Weichselian cold stages. Cold-resistant tundra-steppe communities (Carici rupestris-Kobresietea bellardii) as they occur above the treeline today were, in contrast to more northern locations, mostly lacking. During the last interglacial, open coniferous woodland similar to modern larch taiga was the primary vegetation at the site. Abundant charcoal indicates wildfire events during the last interglacial. Zoogenic disturbances of the local vegetation were indicated by the presence of ruderal plants, especially by abundant Urtica dioica, suggesting that the area was an interglacial refugium for large herbivores. Meadow steppes, which formed the primary vegetation during cold stages and provided potentially suitable pastures for herbivores, were a significant constituent of the plant cover in the Yana Highlands also under the full warm stage conditions of the last interglacial. Consequently, meadow steppes occurred in the Yana Highlands during the entire investigated timespan from MIS 6 to MIS 2 documenting a remarkable environmental stability. Thus, the proportion of meadow steppe vegetation merely shifted in response to the respectively prevailing climatic conditions. Their persistence indicates low precipitation and a relatively warm growing season throughout and beyond the late Pleistocene. The studied fossil record also proves that modern steppe occurrences in the Yana Highlands did not establish as late as in the Holocene but instead are relicts of a formerly continuous steppe belt extending from Central Siberia to Northeast Yakutia during the Pleistocene. The persistence of plants and invertebrates characteristic of meadow steppe vegetation in interior Yakutia throughout the late Quaternary indicates climatic continuity and documents the suitability of this region as a refugium also for other organisms of the Pleistocene mammoth steppe including the iconic large herbivores. (C)2018 Elsevier Ltd. All rights reserved.}, language = {en} } @article{AstudilloSotomayorJaraMunozMelnicketal.2021, author = {Astudillo-Sotomayor, Luis and Jara Mu{\~n}oz, Julius and Melnick, Daniel and Cort{\´e}s-Aranda, Joaqu{\´i}n and Tassara, Andr{\´e}s and Strecker, Manfred}, title = {Fast Holocene slip and localized strain along the Liqui{\~n}e-Ofqui strike-slip fault system, Chile}, series = {Scientific reports}, volume = {11}, journal = {Scientific reports}, number = {1}, publisher = {Macmillan Publishers Limited, part of Springer Nature}, address = {London}, issn = {2045-2322}, doi = {10.1038/s41598-021-85036-5}, pages = {10}, year = {2021}, abstract = {In active tectonic settings dominated by strike-slip kinematics, slip partitioning across subparallel faults is a common feature; therefore, assessing the degree of partitioning and strain localization is paramount for seismic hazard assessments. Here, we estimate a slip rate of 18.8 +/- 2.0 mm/year over the past 9.0 +/- 0.1 ka for a single strand of the Liquirie-Ofqui Fault System, which straddles the Main Cordillera in Southern Chile. This Holocene rate accounts for similar to 82\% of the trench-parallel component of oblique plate convergence and is similar to million-year estimates integrated over the entire fault system. Our results imply that strain localizes on a single fault at millennial time scale but over longer time scales strain localization is not sustained. The fast millennial slip rate in the absence of historical Mw> 6.5 earthquakes along the Liquine-Ofqui Fault System implies either a component of aseismic slip or Mw similar to 7 earthquakes involving multi-trace ruptures and > 150-year repeat times. Our results have implications for the understanding of strike-slip fault system dynamics within volcanic arcs and seismic hazard assessments.}, language = {en} } @misc{AtmaniBookhagenSmith2022, author = {Atmani, Farid and Bookhagen, Bodo and Smith, Taylor}, title = {Measuring Vegetation Heights and Their Seasonal Changes in the Western Namibian Savanna Using Spaceborne Lidars}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1275}, issn = {1866-8372}, doi = {10.25932/publishup-56991}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-569915}, pages = {20}, year = {2022}, abstract = {The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) with its land and vegetation height data product (ATL08), and Global Ecosystem Dynamics Investigation (GEDI) with its terrain elevation and height metrics data product (GEDI Level 2A) missions have great potential to globally map ground and canopy heights. Canopy height is a key factor in estimating above-ground biomass and its seasonal changes; these satellite missions can also improve estimated above-ground carbon stocks. This study presents a novel Sparse Vegetation Detection Algorithm (SVDA) which uses ICESat-2 (ATL03, geolocated photons) data to map tree and vegetation heights in a sparsely vegetated savanna ecosystem. The SVDA consists of three main steps: First, noise photons are filtered using the signal confidence flag from ATL03 data and local point statistics. Second, we classify ground photons based on photon height percentiles. Third, tree and grass photons are classified based on the number of neighbors. We validated tree heights with field measurements (n = 55), finding a root-mean-square error (RMSE) of 1.82 m using SVDA, GEDI Level 2A (Geolocated Elevation and Height Metrics product): 1.33 m, and ATL08: 5.59 m. Our results indicate that the SVDA is effective in identifying canopy photons in savanna ecosystems, where ATL08 performs poorly. We further identify seasonal vegetation height changes with an emphasis on vegetation below 3 m; widespread height changes in this class from two wet-dry cycles show maximum seasonal changes of 1 m, possibly related to seasonal grass-height differences. Our study shows the difficulties of vegetation measurements in savanna ecosystems but provides the first estimates of seasonal biomass changes.}, language = {en} } @article{AtmaniBookhagenSmith2022, author = {Atmani, Farid and Bookhagen, Bodo and Smith, Taylor}, title = {Measuring vegetation heights and their seasonal changes in the Western Namibian Savanna using spaceborne lidars}, series = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, volume = {14}, journal = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, number = {12}, edition = {12}, publisher = {MDPI}, address = {Basel, Schweiz}, issn = {2072-4292}, doi = {10.3390/rs14122928}, pages = {1 -- 20}, year = {2022}, abstract = {The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) with its land and vegetation height data product (ATL08), and Global Ecosystem Dynamics Investigation (GEDI) with its terrain elevation and height metrics data product (GEDI Level 2A) missions have great potential to globally map ground and canopy heights. Canopy height is a key factor in estimating above-ground biomass and its seasonal changes; these satellite missions can also improve estimated above-ground carbon stocks. This study presents a novel Sparse Vegetation Detection Algorithm (SVDA) which uses ICESat-2 (ATL03, geolocated photons) data to map tree and vegetation heights in a sparsely vegetated savanna ecosystem. The SVDA consists of three main steps: First, noise photons are filtered using the signal confidence flag from ATL03 data and local point statistics. Second, we classify ground photons based on photon height percentiles. Third, tree and grass photons are classified based on the number of neighbors. We validated tree heights with field measurements (n = 55), finding a root-mean-square error (RMSE) of 1.82 m using SVDA, GEDI Level 2A (Geolocated Elevation and Height Metrics product): 1.33 m, and ATL08: 5.59 m. Our results indicate that the SVDA is effective in identifying canopy photons in savanna ecosystems, where ATL08 performs poorly. We further identify seasonal vegetation height changes with an emphasis on vegetation below 3 m; widespread height changes in this class from two wet-dry cycles show maximum seasonal changes of 1 m, possibly related to seasonal grass-height differences. Our study shows the difficulties of vegetation measurements in savanna ecosystems but provides the first estimates of seasonal biomass changes.}, language = {en} } @article{AtsawawaranuntComasBruMozhdehietal.2018, author = {Atsawawaranunt, Kamolphat and Comas-Bru, Laia and Mozhdehi, Sahar Amirnezhad and Deininger, Michael and Harrison, Sandy P. and Baker, Andy and Boyd, Meighan and Kaushal, Nikita and Ahmad, Syed Masood and Brahim, Yassine Ait and Arienzo, Monica and Bajo, Petra and Braun, Kerstin and Burstyn, Yuval and Chawchai, Sakonvan and Duan, Wuhui and Hatvani, Istvan Gabor and Hu, Jun and Kern, Zoltan and Labuhn, Inga and Lachniet, Matthew and Lechleitner, Franziska A. and Lorrey, Andrew and Perez-Mejias, Carlos and Pickering, Robyn and Scroxton, Nick and Atkinson, Tim and Ayalon, Avner and Baldini, James and Bar-Matthews, Miriam and Pablo Bernal, Juan and Breitenbach, Sebastian Franz Martin and Boch, Ronny and Borsato, Andrea and Cai, Yanjun and Carolin, Stacy and Cheng, Hai and Columbu, Andrea and Couchoud, Isabelle and Cruz, Francisco and Demeny, Attila and Dominguez-Villar, David and Dragusin, Virgil and Drysdale, Russell and Ersek, Vasile and Finne, Martin and Fleitmann, Dominik and Fohlmeister, Jens Bernd and Frappier, Amy and Genty, Dominique and Holzkamper, Steffen and Hopley, Philip and Kathayat, Gayatri and Keenan-Jones, Duncan and Koltai, Gabriella and Luetscher, Marc and Li, Ting-Yong and Lone, Mahjoor Ahmad and Markowska, Monika and Mattey, Dave and McDermott, Frank and Moreno, Ana and Moseley, Gina and Nehme, Carole and Novello, Valdir F. and Psomiadis, David and Rehfeld, Kira and Ruan, Jiaoyang and Sekhon, Natasha and Sha, Lijuan and Sholz, Denis and Shopov, Yavor and Smith, Andrew and Strikis, Nicolas and Treble, Pauline and Unal-Imer, Ezgi and Vaks, Anton and Vansteenberge, Stef and Veiga-Pires, Cristina and Voarintsoa, Ny Riavo and Wang, Xianfeng and Wong, Corinne and Wortham, Barbara and Wurtzel, Jennifer and Zong, Baoyun}, title = {The SISAL database}, series = {Earth System Science Data}, volume = {10}, journal = {Earth System Science Data}, number = {3}, publisher = {Copernicus}, address = {G{\"o}ttingen}, organization = {SISAL Working Grp Members}, issn = {1866-3508}, doi = {10.5194/essd-10-1687-2018}, pages = {1687 -- 1713}, year = {2018}, abstract = {Stable isotope records from speleothems provide information on past climate changes, most particularly information that can be used to reconstruct past changes in precipitation and atmospheric circulation. These records are increasingly being used to provide "out-of-sample" evaluations of isotope-enabled climate models. SISAL (Speleothem Isotope Synthesis and Analysis) is an international working group of the Past Global Changes (PAGES) project. The working group aims to provide a comprehensive compilation of speleothem isotope records for climate reconstruction and model evaluation. The SISAL database contains data for individual speleothems, grouped by cave system. Stable isotopes of oxygen and carbon (delta O-18, delta C-13) measurements are referenced by distance from the top or bottom of the speleothem. Additional tables provide information on dating, including information on the dates used to construct the original age model and sufficient information to assess the quality of each data set and to erect a standardized chronology across different speleothems. The metadata table provides location information, information on the full range of measurements carried out on each speleothem and information on the cave system that is relevant to the interpretation of the records, as well as citations for both publications and archived data.}, language = {en} } @article{AwaisAhmadKhanetal.2018, author = {Awais, Muhammad and Ahmad, Rafiq and Khan, Nadeem and Garapati, Prashanth and Shahzad, Muhammad and Afroz, Amber and Rashid, Umer and Khan, Sabaz Ali}, title = {Transformation of tomato variety rio grande with drought resistant transcription factor gene ATAF1 and its molecular analysis}, series = {Pakistan Journal of Botany}, volume = {50}, journal = {Pakistan Journal of Botany}, number = {5}, publisher = {Pakistan botanic soc}, address = {Karachi}, issn = {0556-3321}, pages = {1811 -- 1820}, year = {2018}, abstract = {Tomato (Solanum lycopersicum L.) being an important vegetable is cultivated and used throughout the world. It not only contributes in fulfilling the basic nutritional requirements of the human body but also has many health benefits due to its rich biochemical composition. However, its production at large scale is hampered by many limiting factors such as biotic and abiotic stresses. Among the different abiotic stresses, drought poses drastic impact on tomato yield. Drought stress is genetically regulated by many transcription factors that not only regulate the stress responsive mechanism but also facilitate the growth and development of tomato plants. NAC is an important stress related transcription factor genes family, and the ATAF1 gene, a member of this family, is involved in ABA signaling and stress response. In this study, tomato variety Rio Drande was transformed with drought resistant ATAF1 gene via Agrobacterium mediated gene transformation method. The ATAF1 gene was first cloned in the pK7WFG2 vector having kanamycin selectable marker and then it was introduced in the Agrobacterium tumefaciens strain GV3101 through heat shock method. The tomato cotyledon and hypocotyl ex-plants of variety "Rio Ggrande" were cultured on callus induction medium (MS + 2.5 mg/L IAA + 2 mg/L BAP). The calli were then infected with Agrobacterium tumefaciens strain GV3101 containing ATAF1 gene and selection was carried out on the kanamycin selectable medium (MS + 100 mg/L Kan), and were regenerated on MS medium with 1 mg/L IAA + 1 mg/L BAP. Out of 216 putative transformed calli, 13 calli were able to regenerate on the selection medium. Of the 13 calli, three transgenic tomato plantlets were recovered, and these were confirmed through PCR analysis for the presence of 432 bp fragment of ATAF1 gene. The transformation protocol reported here can be used to generate drought resistant tomato plants in future.}, language = {en} } @phdthesis{Ayguel2015, author = {Ayg{\"u}l, Mesut}, title = {Pre-collisional accretion and exhumation along the southern Laurasian active margin, Central Pontides, Turkey}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-416769}, school = {Universit{\"a}t Potsdam}, pages = {xxxiv, 206}, year = {2015}, abstract = {The Central Pontides is an accretionary-type orogenic area within the Alpine-Himalayan orogenic belt characterized by pre-collisional tectonic continental growth. The region comprises Mesozoic subduction-accretionary complexes and an accreted intra-oceanic arc that are sandwiched between the Laurasian active continental margin and Gondwana-derived the K{\i}r{\c{s}}ehir Block. The subduction-accretion complexes mainly consist of an Albian-Turonian accretionary wedge representing the Laurasian active continental margin. To the north, the wedge consists of slate/phyllite and metasandstone intercalation with recrystallized limestone, Na-amphibole-bearing metabasite (PT= 7-12 kbar and 400 ± 70 ºC) and tectonic slices of serpentinite representing accreted distal part of a large Lower Cretaceous submarine turbidite fan deposited on the Laurasian active continental margin that was subsequently accreted and metamorphosed. Raman spectra of carbonaceous material (RSCM) of the metapelitic rocks revealed that the metaflysch sequence consists of metamorphic packets with distinct peak metamorphic temperatures. The majority of the metapelites are low-temperature (ca. 330 °C) slates characterized by lack of differentiation of the graphite (G) and D2 defect bands. They possibly represent offscraped distal turbidites along the toe of the Albian accretionary wedge. The rest are phyllites that are characterized by slightly pronounced G band with D2 defect band occurring on its shoulder. Peak metamorphic temperatures of these phyllites are constrained to 370-385 °C. The phyllites are associated with a strip of incipient blueschist facies metabasites which are found as slivers within the offscraped distal turbidites. They possibly represent underplated continental metasediments together with oceanic crustal basalt along the basal d{\´e}collement. Tectonic emplacement of the underplated rocks into the offscraped distal turbidites was possibly achieved by out-of-sequence thrusting causing tectonic thickening and uplift of the wedge. 40Ar/39Ar phengite ages from the phyllites are ca. 100 Ma, indicating Albian subduction and regional HP metamorphism. The accreted continental metasediments are underlain by HP/LT metamorphic rocks of oceanic origin along an extensional shear zone. The oceanic metamorphic sequence mainly comprises tectonically thickened deep-seated eclogite to blueschist facies metabasites and micaschists. In the studied area, metabasites are epidote-blueschists locally with garnet (PT= 17 ± 1 kbar and 500 ± 40 °C). Lawsonite-blueschists are exposed as blocks along the extensional shear zone (PT= 14 ± 2 kbar and 370-440 °C). They are possibly associated with low shear stress regime of the initial stage of convergence. Close to the shear zone, the footwall micaschists consist of quartz, phengite, paragonite, chlorite, rutile with syn-kinematic albite porphyroblast formed by pervasive shearing during exhumation. These types of micaschists are tourmaline-bearing and their retrograde nature suggests high-fluid flux along shear zones. Peak metamorphic mineral assemblages are partly preserved in the chloritoid-micaschist farther away from the shear zone representing the zero strain domains during exhumation. Three peak metamorphic assemblages are identified and their PT conditions are constrained by pseudosections produced by Theriak-Domino and by Raman spectra of carbonaceous material: 1) garnet-chloritoid-glaucophane with lawsonite pseudomorphs (P= 17.5 ± 1 kbar, T: 390-450 °C) 2) chloritoid with glaucophane pseudomorphs (P= 16-18 kbar, T: 475 ± 40 °C) and 3) relatively high-Mg chloritoid (17\%) with jadeite pseudomorphs (P= 22-25 kbar; T: 440 ± 30 °C) in addition to phengite, paragonite, quartz, chlorite, rutile and apatite. The last mineral assemblage is interpreted as transformation of the chloritoid + glaucophane assemblage to chloritoid + jadeite paragenesis with increasing pressure. Absence of tourmaline suggests that the chloritoid-micaschist did not interact with B-rich fluids during zero strain exhumation. 40Ar/39Ar phengite age of a pervasively sheared footwall micaschist is constrained to 100.6 ± 1.3 Ma and that of a chloritoid-micaschist is constrained to 91.8 ± 1.8 Ma suggesting exhumation during on-going subduction with a southward younging of the basal accretion and the regional metamorphism. To the south, accretionary wedge consists of blueschist and greenschist facies metabasite, marble and volcanogenic metasediment intercalation. 40Ar/39Ar phengite dating reveals that this part of the wedge is of Middle Jurassic age partly overprinted during the Albian. Emplacement of the Middle Jurassic subduction-accretion complexes is possibly associated with obliquity of the Albian convergence. Peak metamorphic assemblages and PT estimates of the deep-seated oceanic metamorphic sequence suggest tectonic stacking within wedge with different depths of burial. Coupling and exhumation of the distinct metamorphic slices are controlled by decompression of the wedge possibly along a retreating slab. Structurally, decompression of the wedge is evident by an extensional shear zone and the footwall micaschists with syn-kinematic albite porphyroblasts. Post-kinematic garnets with increasing grossular content and pseudomorphing minerals within the chloritoid-micaschists also support decompression model without an extra heating. Thickening of subduction-accretionary complexes is attributed to i) significant amount of clastic sediment supply from the overriding continental domain and ii) deep level basal underplating by propagation of the d{\´e}collement along a retreating slab. Underplating by basal d{\´e}collement propagation and subsequent exhumation of the deep-seated subduction-accretion complexes are connected and controlled by slab rollback creating a necessary space for progressive basal accretion along the plate interface and extension of the wedge above for exhumation of the tectonically thickened metamorphic sequences. This might be the most common mechanism of the tectonic thickening and subsequent exhumation of deep-seated HP/LT subduction-accretion complexes. To the south, the Albian-Turonian accretionary wedge structurally overlies a low-grade volcanic arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed north of the İzmir-Ankara-Erzincan suture (İAES), separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metavolcanic rocks are stratigraphically overlain by recrystallized micritic limestone with rare volcanogenic metaclastic rocks. Two groups can be identified based on trace and rare earth element characteristics. The first group consists of basaltic andesite/andesite (BA1) and rhyolite with abundant cognate gabbroic xenoliths. It is characterized by relative enrichment of LREE with respect to HREE. The rocks are enriched in fluid mobile LILE, and strongly depleted in Ti and P reflecting fractionation of Fe-Ti oxides and apatite, which are found in the mafic cognate xenoliths. Abundant cognate gabbroic xenoliths and identical trace and rare earth elements compositions suggest that rhyolites and basaltic andesites/andesites (BA1) are cogenetic and felsic rocks were derived from a common mafic parental magma by fractional crystallization and accumulation processes. The second group consists only of basaltic andesites (BA2) with flat REE pattern resembling island arc tholeiites. Although enriched in LILE, this group is not depleted in Ti or P. Geochemistry of the metavolcanic rocks indicates supra-subduction volcanism evidenced by depletion of HFSE and enrichment of LILE. The arc sequence is sandwiched between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic m{\´e}lange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the K{\"o}sdağ Arc was intra-oceanic. This is in accordance with basaltic andesites (BA2) with island arc tholeiite REE pattern. Zircons from two metarhyolite samples give Late Cretaceous (93.8 ± 1.9 and 94.4 ± 1.9 Ma) U/Pb ages. Low-grade regional metamorphism of the intra-oceanic arc sequence is constrained 69.9 ± 0.4 Ma by 40Ar/39Ar dating on metamorphic muscovite from a metarhyolite indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. The youngest 40Ar/39Ar phengite age from the overlying subduction-accretion complexes is 92 Ma confirming southward younging of an accretionary-type orogenic belt. Hence, the arc sequence represents an intra-oceanic paleo-arc that formed above the sinking Tethyan slab and finally accreted to Laurasian active continental margin. Abrupt non-collisional termination of arc volcanism was possibly associated with southward migration of the arc volcanism similar to the Izu-Bonin-Mariana arc system. The intra-oceanic K{\"o}sdağ Arc is coeval with the obducted supra-subduction ophiolites in NW Turkey suggesting that it represents part of the presumed but missing incipient intra-oceanic arc associated with the generation of the regional supra-subduction ophiolites. Remnants of a Late Cretaceous intra-oceanic paleo-arc and supra-subduction ophiolites can be traced eastward within the Alp-Himalayan orogenic belt. This reveals that Late Cretaceous intra-oceanic subduction occurred as connected event above the sinking Tethyan slab. It resulted as arc accretion to Laurasian active margin and supra-subduction ophiolite obduction on Gondwana-derived terranes.}, language = {en} } @article{AyguelOberhaensli2017, author = {Ayg{\"u}l, Mesut and Oberh{\"a}nsli, Roland}, title = {Tectonic Stacking of HP/LT Metamorphic Rocks in Accretionary Wedges and the Role of Shallowing Slab-Mantle Decoupling}, series = {Tectonics}, volume = {36}, journal = {Tectonics}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1002/2017TC004689}, pages = {2332 -- 2346}, year = {2017}, abstract = {High-pressure/low-temperature (HP/LT) chloritoid-bearing micaschists crop out widely in the central part of northern Turkey and represent deep-seated subduction-accretionary complexes. Three peak metamorphic assemblages are identified in the area studied: (1) garnet-chloritoid-glaucophane with pseudomorphs after lawsonite; (2) chloritoid with pseudomorphs after glaucophane; and (3) chloritoid with pseudomorphs after jadeite in addition to phengite, paragonite, quartz, chlorite, rutile, and apatite. The latter is interpreted as transformation of a chloritoid + glaucophane assemblage to chloritoid + jadeite with increasing pressure; PT modeling indicates similar to 17 and 22-25 kbars for the two peak parageneses. The diversity of peak metamorphic assemblages and the PT estimates suggest that basal accretion occurred at different depths within the wedge. The depth of the basal accretion is possibly controlled by the slab-mantle decoupling depth. Stretching and thinning of the lithospheric fore arc induced by the slab rollback possibly caused shallowing of the slab-mantle decoupling depth which limited depth of the basal accretion from 70-80km to similar to 55km within the subduction channel. A slab-mantle coupling depth-controlled basal accretion may also explain the scarcity of eclogite and high-grade blueschist facies metamorphic rocks in active intraoceanic subduction zones. Because the overriding plate is young and hot in intraoceanic subductions, the slab and mantle are coupled at a relatively shallow depth before eclogitization of the oceanic crust. This prevents accretion and exhumation of eclogite along the subduction channel.}, language = {en} } @article{AyguelOkayOberhaenslietal.2015, author = {Ayg{\"u}l, Mesut and Okay, Aral I. and Oberh{\"a}nsli, Roland and Schmidt, Alexander and Sudo, Masafumi}, title = {Late Cretaceous infant intra-oceanic arc volcanism, the Central Pontides, Turkey: Petrogenetic and tectonic implications}, series = {Journal of Asian earth sciences}, volume = {111}, journal = {Journal of Asian earth sciences}, publisher = {Elsevier}, address = {Oxford}, issn = {1367-9120}, doi = {10.1016/j.jseaes.2015.07.005}, pages = {312 -- 327}, year = {2015}, abstract = {A tectonic slice of an arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed in the Central Pontides north of the Izmir-Ankara-Erzincan suture separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metasedimentary succession comprises recrystallized micritic limestone with rare volcanogenic metaclastic rocks and stratigraphically overlies the metavolcanic rocks. The geochemistry of the metavolcanic rocks indicates an arc setting evidenced by depletion of HFSE (Ti, P and Nb) and enrichment of fluid mobile LILE. Identical trace and rare earth elements compositions of basaltic andesites/andesites and rhyolites suggest that they are cogenetic and derived from a common parental magma. The arc sequence crops out between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic melange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the Kosdag Arc was intra-oceanic. Zircons from two metarhyolite samples give Late Cretaceous (93.8 +/- 1.9 and 94.4 +/- 1.9 Ma) U/Pb ages. These ages are the same as the age of the supra-subduction ophiolites in western Turkey, which implies that that the Kosdag Arc may represent part of the incipient arc formed during the generation of the supra-subduction ophiolites. The low-grade regional metamorphism in the Kosdag Arc is constrained to 69.9 +/- 0.4 Ma by Ar-40/Ar-39 muscovite dating indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. Non-collisional cessation of the arc volcanism is possibly associated with southward migration of the magmatism as in the Izu-Bonin-Mariana arc system. (c) 2015 Elsevier Ltd. All rights reserved.}, language = {en} } @article{AyguelOkayOberhaenslietal.2015, author = {Ayg{\"u}l, Mesut and Okay, Aral I. and Oberh{\"a}nsli, Roland and Ziemann, Martin Andreas}, title = {Thermal structure of low-grade accreted Lower Cretaceous distal turbidites, the Central Pontides, Turkey: insights for tectonic thickening of an accretionary wedge}, series = {Turkish journal of earth sciences = T{\"u}rk yerbilimleri dergisi}, volume = {24}, journal = {Turkish journal of earth sciences = T{\"u}rk yerbilimleri dergisi}, number = {5}, publisher = {T{\"u}bitak}, address = {Ankara}, issn = {1300-0985}, doi = {10.3906/yer-1504-4}, pages = {461 -- 474}, year = {2015}, abstract = {Albian-Turonian subduction-accretionary complexes are exposed widely in the Central Pontides. A major portion of the accretionary complexes is made up of a metaflysch sequence consisting of slate/phyllite and metasandstone intercalation with blocks of marble, Na-amphibole bearing metabasite, and serpentinite. The metaflysch sequence represents distal parts of a large Lower Cretaceous submarine turbidite fan deposited on the Laurasian active continental margin that was subsequently accreted and metamorphosed during the Albian. Raman spectra of carbonaceous material of the metapelitic rocks revealed that the metaflysch consists of metamorphic packets with distinct peak metamorphic temperatures. The majority of the metapelites are low-temperature (ca. 330 degrees C) slates characterized by lack of differentiation of the graphite (G) and D2 defect bands. They possibly represent offscraped distal turbidites along the toe of the Albian accretionary wedge. Other phyllites are characterized by a slightly pronounced G band with a D2 defect band occurring on its shoulder. Peak metamorphic temperatures of these phyllites are constrained to 370-385 degrees C. The phyllites are associated with a strip of incipient blueschist facies metabasites and are found as a sliver within the offscraped distal turbidites. We interpret the phyllites as underplated continental sediments together with oceanic crustal basalt along the basal decollement. Tectonic emplacement of the underplated rocks into the offscraped distal turbidites was possibly achieved by out-of-sequence thrusting causing tectonic thickening and uplift of the wedge.}, language = {en} } @misc{AyllonGrimmAttingeretal.2018, author = {Ayllon, Daniel and Grimm, Volker and Attinger, Sabine and Hauhs, Michael and Simmer, Clemens and Vereecken, Harry and Lischeid, Gunnar}, title = {Cross-disciplinary links in environmental systems science}, series = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man}, volume = {622}, journal = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2017.12.007}, pages = {954 -- 973}, year = {2018}, abstract = {Terrestrial environmental systems are characterised by numerous feedback links between their different compartments. However, scientific research is organized into disciplines that focus on processes within the respective compartments rather than on interdisciplinary links. Major feedback mechanisms between compartments might therefore have been systematically overlooked so far. Without identifying these gaps, initiatives on future comprehensive environmental monitoring schemes and experimental platforms might fail. We performed a comprehensive overview of feedbacks between compartments currently represented in environmental sciences and explores to what degree missing links have already been acknowledged in the literature. We focused on process models as they can be regarded as repositories of scientific knowledge that compile findings of numerous single studies. In total, 118 simulation models from 23 model types were analysed. Missing processes linking different environmental compartments were identified based on a meta-review of 346 published reviews, model inter-comparison studies, and model descriptions. Eight disciplines of environmental sciences were considered and 396 linking processes were identified and ascribed to the physical, chemical or biological domain. There were significant differences between model types and scientific disciplines regarding implemented interdisciplinary links. The most wide-spread interdisciplinary links were between physical processes in meteorology, hydrology and soil science that drive or set the boundary conditions for other processes (e.g., ecological processes). In contrast, most chemical and biological processes were restricted to links within the same compartment. Integration of multiple environmental compartments and interdisciplinary knowledge was scarce in most model types. There was a strong bias of suggested future research foci and model extensions towards reinforcing existing interdisciplinary knowledge rather than to open up new interdisciplinary pathways. No clear pattern across disciplines exists with respect to suggested future research efforts. There is no evidence that environmental research would clearly converge towards more integrated approaches or towards an overarching environmental systems theory. (c) 2017 Elsevier B.V. All rights reserved.}, language = {en} } @misc{AyzelIzhitskiy2018, author = {Ayzel, Georgy and Izhitskiy, Alexander}, title = {Coupling physically based and data-driven models for assessing freshwater inflow into the Small Aral Sea}, series = {Innovative Water Resources Management in a Changing Environment - Understanding and Balancing Interactions between Humankind and Nature}, volume = {379}, journal = {Innovative Water Resources Management in a Changing Environment - Understanding and Balancing Interactions between Humankind and Nature}, editor = {Xu, Z Peng}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {2199-899X}, doi = {10.5194/piahs-379-151-2018}, pages = {151 -- 158}, year = {2018}, abstract = {The Aral Sea desiccation and related changes in hydroclimatic conditions on a regional level is a hot topic for past decades. The key problem of scientific research projects devoted to an investigation of modern Aral Sea basin hydrological regime is its discontinuous nature - the only limited amount of papers takes into account the complex runoff formation system entirely. Addressing this challenge we have developed a continuous prediction system for assessing freshwater inflow into the Small Aral Sea based on coupling stack of hydrological and data-driven models. Results show a good prediction skill and approve the possibility to develop a valuable water assessment tool which utilizes the power of classical physically based and modern machine learning models both for territories with complex water management system and strong water-related data scarcity. The source code and data of the proposed system is available on a Github page (https://github.com/SMASHIproject/IWRM2018).}, language = {en} } @misc{AyzelSchefferHeistermann2020, author = {Ayzel, Georgy and Scheffer, Tobias and Heistermann, Maik}, title = {RainNet v1.0}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {964}, issn = {1866-8372}, doi = {10.25932/publishup-47294}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472942}, pages = {16}, year = {2020}, abstract = {In this study, we present RainNet, a deep convolutional neural network for radar-based precipitation nowcasting. Its design was inspired by the U-Net and SegNet families of deep learning models, which were originally designed for binary segmentation tasks. RainNet was trained to predict continuous precipitation intensities at a lead time of 5min, using several years of quality-controlled weather radar composites provided by the German Weather Service (DWD). That data set covers Germany with a spatial domain of 900km × 900km and has a resolution of 1km in space and 5min in time. Independent verification experiments were carried out on 11 summer precipitation events from 2016 to 2017. In order to achieve a lead time of 1h, a recursive approach was implemented by using RainNet predictions at 5min lead times as model inputs for longer lead times. In the verification experiments, trivial Eulerian persistence and a conventional model based on optical flow served as benchmarks. The latter is available in the rainymotion library and had previously been shown to outperform DWD's operational nowcasting model for the same set of verification events. RainNet significantly outperforms the benchmark models at all lead times up to 60min for the routine verification metrics mean absolute error (MAE) and the critical success index (CSI) at intensity thresholds of 0.125, 1, and 5mm h⁻¹. However, rainymotion turned out to be superior in predicting the exceedance of higher intensity thresholds (here 10 and 15mm h⁻¹). The limited ability of RainNet to predict heavy rainfall intensities is an undesirable property which we attribute to a high level of spatial smoothing introduced by the model. At a lead time of 5min, an analysis of power spectral density confirmed a significant loss of spectral power at length scales of 16km and below. Obviously, RainNet had learned an optimal level of smoothing to produce a nowcast at 5min lead time. In that sense, the loss of spectral power at small scales is informative, too, as it reflects the limits of predictability as a function of spatial scale. Beyond the lead time of 5min, however, the increasing level of smoothing is a mere artifact - an analogue to numerical diffusion - that is not a property of RainNet itself but of its recursive application. In the context of early warning, the smoothing is particularly unfavorable since pronounced features of intense precipitation tend to get lost over longer lead times. Hence, we propose several options to address this issue in prospective research, including an adjustment of the loss function for model training, model training for longer lead times, and the prediction of threshold exceedance in terms of a binary segmentation task. Furthermore, we suggest additional input data that could help to better identify situations with imminent precipitation dynamics. The model code, pretrained weights, and training data are provided in open repositories as an input for such future studies.}, language = {en} } @article{AyzelSchefferHeistermann2020, author = {Ayzel, Georgy and Scheffer, Tobias and Heistermann, Maik}, title = {RainNet v1.0}, series = {Geoscientific Model Development}, volume = {13}, journal = {Geoscientific Model Development}, number = {6}, publisher = {Copernicus Publ.}, address = {G{\"o}ttingen}, issn = {1991-959X}, doi = {10.5194/gmd-13-2631-2020}, pages = {2631 -- 2644}, year = {2020}, abstract = {In this study, we present RainNet, a deep convolutional neural network for radar-based precipitation nowcasting. Its design was inspired by the U-Net and SegNet families of deep learning models, which were originally designed for binary segmentation tasks. RainNet was trained to predict continuous precipitation intensities at a lead time of 5min, using several years of quality-controlled weather radar composites provided by the German Weather Service (DWD). That data set covers Germany with a spatial domain of 900km × 900km and has a resolution of 1km in space and 5min in time. Independent verification experiments were carried out on 11 summer precipitation events from 2016 to 2017. In order to achieve a lead time of 1h, a recursive approach was implemented by using RainNet predictions at 5min lead times as model inputs for longer lead times. In the verification experiments, trivial Eulerian persistence and a conventional model based on optical flow served as benchmarks. The latter is available in the rainymotion library and had previously been shown to outperform DWD's operational nowcasting model for the same set of verification events. RainNet significantly outperforms the benchmark models at all lead times up to 60min for the routine verification metrics mean absolute error (MAE) and the critical success index (CSI) at intensity thresholds of 0.125, 1, and 5mm h⁻¹. However, rainymotion turned out to be superior in predicting the exceedance of higher intensity thresholds (here 10 and 15mm h⁻¹). The limited ability of RainNet to predict heavy rainfall intensities is an undesirable property which we attribute to a high level of spatial smoothing introduced by the model. At a lead time of 5min, an analysis of power spectral density confirmed a significant loss of spectral power at length scales of 16km and below. Obviously, RainNet had learned an optimal level of smoothing to produce a nowcast at 5min lead time. In that sense, the loss of spectral power at small scales is informative, too, as it reflects the limits of predictability as a function of spatial scale. Beyond the lead time of 5min, however, the increasing level of smoothing is a mere artifact - an analogue to numerical diffusion - that is not a property of RainNet itself but of its recursive application. In the context of early warning, the smoothing is particularly unfavorable since pronounced features of intense precipitation tend to get lost over longer lead times. Hence, we propose several options to address this issue in prospective research, including an adjustment of the loss function for model training, model training for longer lead times, and the prediction of threshold exceedance in terms of a binary segmentation task. Furthermore, we suggest additional input data that could help to better identify situations with imminent precipitation dynamics. The model code, pretrained weights, and training data are provided in open repositories as an input for such future studies.}, language = {en} } @article{Ayzel2018, author = {Ayzel, Georgy V.}, title = {Runoff predictions in ungauged arctic basins using conceptual models forced by reanalysis data}, series = {Water Resources}, volume = {45}, journal = {Water Resources}, publisher = {Pleiades Publ.}, address = {New York}, issn = {0097-8078}, doi = {10.1134/S0097807818060180}, pages = {S1 -- S7}, year = {2018}, abstract = {Due to global warming, the problem of assessing water resources and their vulnerability to climate drivers in the Arctic region has become a focus in the recent years. This study is aimed at investigating three lumped hydrological models to predict daily runoff of large-scale Arctic basins in the case of substantial data scarcity. All models were driven only by meteorological forcing reanalysis dataset without any additional information about landscape, soil, or vegetation cover properties of the studied basins. Model parameter regionalization based on transferring the whole parameter set showed good efficiency for predictions in ungauged basins. We run a blind test of the proposed methodology for ensemble runoff predictions on five sub-basins, for which only monthly observations were available, and obtained promising results for current water resources assessment for a broad domain of ungauged basins in the Russian Arctic.}, language = {en} }