@phdthesis{Audoersch2016,
  author    = {Aud{\"o}rsch, Stephan},
  title     = {Die Synthese von (2Z,4E)-Diencarbons{\"a}ureestern und ihre Anwendung in der Totalsynthese von Polyacetylenen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-92366},
  school      = {Universit{\"a}t Potsdam},
  pages     = {139},
  year      = {2016},
  abstract  = {Z,E-Diene sind ein h{\"a}ufig auftretendes Strukturmerkmal in Naturstoffen. Aus diesem Grund ist die einfache Darstellung dieser Struktureinheit von großen Interesse in der organischen Chemie. Das erste Ziel der vorliegenden Arbeit war daher die Weiterentwicklung der Ringschlussmetathese-/ baseninduzierten Ring{\"o}ffnungs-/ Veresterungssequenz (RBRV-Sequenz) zur Synthese von (2Z,4E)-Diencarbons{\"a}ureethylestern ausgehend von Butenoaten. Dazu wurde zun{\"a}chst die RBRV-Sequenz optimiert. Diese aus drei Schritten bestehende Sequenz konnte in einem Eintopf-Verfahren angewendet werden. Die Ringschlussmetathese gelang mit einer Katalysatorbeladung von 1 mol\% des GRUBBS-Katalysators der zweiten Generation in Dichlormethan. F{\"u}r die baseninduzierte Ring{\"o}ffnung des β,γ-unges{\"a}ttigten δ Valerolactons wurde NaHMDS verwendet. Die Alkylierung der Carboxylatspezies gelang mit dem MEERWEIN-Reagenz. Die Anwendbarkeit der Sequenz wurde f{\"u}r verschiedene Substrate demonstriert. Die Erweiterung der Methode auf α-substituierte Butenoate unterlag starken Einschr{\"a}nkungen. So konnte der Zugang f{\"u}r α Hydroxyderivate realisiert werden. Bei der Anwendung der RBRV-Sequenz auf die α-substituierten Butenoate wurde festgestellt, dass diese sich nur in moderaten Ausbeuten umsetzen ließen und zudem nicht selektiv zu den (2E,4E)-konfigurierten α-substituierten-Dienestern reagierten. Der Einsatz von Eninen unter den Standardbedingungen der RBRV-Sequenz gelang nicht. Erst nach Modifizierung der Sequenz (h{\"o}here Katalysatorbeladung, Wechsel des L{\"o}sungsmittels) konnten die [3]Dendralen-Produkte in geringen Ausbeuten erhalten werden. Im zweiten Teil der Arbeit wurde der Einsatz von (2Z,4E)-Diencarbons{\"a}ureethylestern in der Totalsynthese von Naturstoffen untersucht. Dazu wurden zun{\"a}chst die Transformationsm{\"o}glichkeiten der Ester gepr{\"u}ft. Es konnte gezeigt werden, dass sich (2Z,4E)-Diencarbons{\"a}ureethylester insbesondere zur Synthese von (2Z,4E)-Aldehyden sowie zum Aufbau der (3Z,5E)-Dien-1-in-Struktur eignen. Anhand dieser Ergebnisse wurde im Anschluss die RBRV-Sequenz in der Totalsynthese eingesetzt. Dazu wurde zun{\"a}chst der (2Z,4E)-Dienester Microsphaerodiolin in seiner ersten Totalsynthese auf drei verschiedene Routen hergestellt. Im Anschluss wurden sechs verschiedene Polyacetylene mit einer (3Z,5E)-Dien-1-in-Einheit hergestellt. Schl{\"u}sselschritte in ihrer Synthese waren immer die RBRV-Sequenz zum Aufbau der Z,E-Dien-Einheit, die Transformation des Esters in ein terminales Alkin sowie die CADIOT-CHODKIEWICZ-Kupplung zum Aufbau unsymmetrischer Polyine. Alle sechs Polyacetylene wurden zum ersten Mal in einer Totalsynthese synthetisiert. Drei Polyacetylene wurden ausgehend von (S)-Butantriol enantiomerenrein dargestellt. Anhand ihrer Drehwerte konnte eine Revision der von YAO und Mitarbeitern vorgenommen Zuordnung der Absolutkonfiguration der Naturstoffe vorgenommen werden.},
  language  = {de}
}
@phdthesis{Won2016,
  author    = {Won, Jooyoung},
  title     = {Dynamic and equilibrium adsorption behaviour of ß-lactoglobulin at the solution/tetradecane interface: Effect of solution concentration, pH and ionic strength},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-99167},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 106},
  year      = {2016},
  abstract  = {Proteins are amphiphilic and adsorb at liquid interfaces. Therefore, they can be efficient stabilizers of foams and emulsions. β-lactoglobulin (BLG) is one of the most widely studied proteins due to its major industrial applications, in particular in food technology. In the present work, the influence of different bulk concentration, solution pH and ionic strength on the dynamic and equilibrium pressures of BLG adsorbed layers at the solution/tetradecane (W/TD) interface has been investigated. Dynamic interfacial pressure (Π) and interfacial dilational elastic modulus (E') of BLG solutions for various concentrations at three different pH values of 3, 5 and 7 at a fixed ionic strength of 10 mM and for a selected fixed concentration at three different ionic strengths of 1 mM, 10 mM and 100 mM are measured by Profile Analysis Tensiometer PAT-1 (SINTERFACE Technologies, Germany). A quantitative data analysis requires additional consideration of depletion due to BLG adsorption at the interface at low protein bulk concentrations. This fact makes experiments more efficient when oil drops are studied in the aqueous protein solutions rather than solution drops formed in oil. On the basis of obtained experimental data, concentration dependencies and the effect of solution pH on the protein surface activity was qualitatively analysed. In the presence of 10 mM buffer, we observed that generally the adsorbed amount is increasing with increasing BLG bulk concentration for all three pH values. The adsorption kinetics at pH 5 result in the highest Π values at any time of adsorption while it exhibits a less active behaviour at pH 3. Since the experimental data have not been in a good agreement with the classical diffusion controlled model due to the conformational changes which occur when the protein molecules get in contact with the hydrophobic oil phase in order to adapt to the interfacial environment, a new theoretical model is proposed here. The adsorption kinetics data were analysed with the newly proposed model, which is the classical diffusion model but modified by assuming an additional change in the surface activity of BLG molecules when adsorbing at the interface. This effect can be expressed through the adsorption activity constant in the corresponding equation of state. The dilational visco-elasticity of the BLG adsorbed interfacial layers is determined from measured dynamic interfacial tensions during sinusoidal drop area variations. The interfacial tension responses to these harmonic drop oscillations are interpreted with the same thermodynamic model which is used for the corresponding adsorption isotherm. At a selected BLG concentration of 2×10-6 mol/l, the influence of the ionic strength using different buffer concentration of 1, 10 and 100 mM on the interfacial pressure was studied. It is affected weakly at pH 5, whereas it has a strong impact by increasing buffer concentration at pH 3 and 7. In conclusion, the structure formation of BLG adsorbed layer in the early stage of adsorption at the W/TD interface is similar to those of the solution/air (W/A) surface. However, the equation of state at the W/TD interface provides an adsorption activity constant which is almost two orders of magnitude higher than that for the solution/air surface. At the end of this work, a new experimental tool called Drop and Bubble Micro Manipulator DBMM (SINTERFACE Technologies, Germany) has been introduced to study the stability of protein covered bubbles against coalescence. Among the available protocols the lifetime between the moment of contact and coalescence of two contacting bubble is determined for different BLG concentrations. The adsorbed amount of BLG is determined as a function of time and concentration and correlates with the observed coalescence behaviour of the contacting bubbles.},
  language  = {en}
}
@phdthesis{Couturier2016,
  author    = {Couturier, Jean-Philippe},
  title     = {New inverse opal hydrogels as platform for detecting macromolecules},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98412},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 132, XXXVIII},
  year      = {2016},
  abstract  = {In this thesis, a route to temperature-, pH-, solvent-, 1,2-diol-, and protein-responsive sensors made of biocompatible and low-fouling materials is established. These sensor devices are based on the sensitivemodulation of the visual band gap of a photonic crystal (PhC), which is induced by the selective binding of analytes, triggering a volume phase transition. The PhCs introduced by this work show a high sensitivity not only for small biomolecules, but also for large analytes, such as glycopolymers or proteins. This enables the PhC to act as a sensor that detects analytes without the need of complex equipment. Due to their periodical dielectric structure, PhCs prevent the propagation of specific wavelengths. A change of the periodicity parameters is thus indicated by a change in the reflected wavelengths. In the case explored, the PhC sensors are implemented as periodically structured responsive hydrogels in formof an inverse opal. The stimuli-sensitive inverse opal hydrogels (IOHs) were prepared using a sacrificial opal template of monodispersed silica particles. First, monodisperse silica particles were assembled with a hexagonally packed structure via vertical deposition onto glass slides. The obtained silica crystals, also named colloidal crystals (CCs), exhibit structural color. Subsequently, the CCs templates were embedded in polymer matrix with low-fouling properties. The polymer matrices were composed of oligo(ethylene glycol) methacrylate derivatives (OEGMAs) that render the hydrogels thermoresponsive. Finally, the silica particles were etched, to produce highly porous hydrogel replicas of the CC. Importantly, the inner structure and thus the ability for light diffraction of the IOHs formed was maintained. The IOH membrane was shown to have interconnected pores with a diameter as well as interconnections between the pores of several hundred nanometers. This enables not only the detection of small analytes, but also, the detection of even large analytes that can diffuse into the nanostructured IOH membrane. Various recognition unit - analyte model systems, such as benzoboroxole - 1,2-diols, biotin - avidin and mannose - concanavalin A, were studied by incorporating functional comonomers of benzoboroxole, biotin and mannose into the copolymers. The incorporated recognition units specifically bind to certain low and highmolar mass biomolecules, namely to certain saccharides, catechols, glycopolymers or proteins. Their specific binding strongly changes the overall hydrophilicity, thus modulating the swelling of the IOH matrices, and in consequence, drastically changes their internal periodicity. This swelling is amplified by the thermoresponsive properties of the polymer matrix. The shift of the interference band gap due to the specific molecular recognition is easily visible by the naked eye (up to 150 nm shifts). Moreover, preliminary trial were attempted to detect even larger entities. Therefore anti-bodies were immobilized on hydrogel platforms via polymer-analogous esterification. These platforms incorporate comonomers made of tri(ethylene glycol) methacrylate end-functionalized with a carboxylic acid. In these model systems, the bacteria analytes are too big to penetrate into the IOH membranes, but can only interact with their surfaces. The selected model bacteria, as Escherichia coli, show a specific affinity to anti-body-functionalized hydrogels. Surprisingly in the case functionalized IOHs, this study produced weak color shifts, possibly opening a path to detect directly living organism, which will need further investigations.},
  language  = {en}
}
@phdthesis{Hildebrand2016,
  author    = {Hildebrand, Viet},
  title     = {Twofold switchable block copolymers based on new polyzwitterions},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101372},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 170, LXXX},
  year      = {2016},
  abstract  = {In complement to the well-established zwitterionic monomers 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate ("SPE") and 3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate ("SPP"), the closely related sulfobetaine monomers were synthesized and polymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar mass were characterized with respect to their solubility in water, deuterated water, and aqueous salt solutions. These poly(sulfobetaine)s show thermoresponsive behavior in water, exhibiting upper critical solution temperatures (UCST). Phase transition temperatures depend notably on the molar mass and polymer concentration, and are much higher in D2O than in H2O. Also, the phase transition temperatures are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed structure of the zwitterionic side chain, on the other hand. For the polymers with the same zwitterionic side chain, it is found that methacrylamide-based poly(sulfobetaine)s exhibit higher UCST-type transition temperatures than their methacrylate analogs. The extension of the distance between polymerizable unit and zwitterionic groups from 2 to 3 methylene units decreases the UCST-type transition temperatures. Poly(sulfobetaine)s derived from aliphatic esters show higher UCST-type transition temperatures than their analogs featuring cyclic ammonium cations. The UCST-type transition temperatures increase markedly with spacer length separating the cationic and anionic moieties from 3 to 4 methylene units. Thus, apparently small variations of their chemical structure strongly affect the phase behavior of the polyzwitterions in specific aqueous environments. Water-soluble block copolymers were prepared from the zwitterionic monomers and the non-ionic monomer N-isopropylmethacrylamide ("NIPMAM") by the RAFT polymerization. Such block copolymers with two hydrophilic blocks exhibit twofold thermoresponsive behavior in water. The poly(sulfobetaine) block shows an UCST, whereas the poly(NIPMAM) block exhibits a lower critical solution temperature (LCST). This constellation induces a structure inversion of the solvophobic aggregate, called "schizophrenic micelle". Depending on the relative positions of the two different phase transitions, the block copolymer passes through a molecularly dissolved or an insoluble intermediate regime, which can be modulated by the polymer concentration or by the addition of salt. Whereas, at low temperature, the poly(sulfobetaine) block forms polar aggregates that are kept in solution by the poly(NIPMAM) block, at high temperature, the poly(NIPMAM) block forms hydrophobic aggregates that are kept in solution by the poly(sulfobetaine) block. Thus, aggregates can be prepared in water, which switch reversibly their "inside" to the "outside", and vice versa.},
  language  = {en}
}
@phdthesis{Knoop2016,
  author    = {Knoop, Mats Timothy},
  title     = {Neue Polyacrylnitril-basierte, schmelzspinnbare Pr{\"a}kursoren f{\"u}r Carbonfasern},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103972},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VI, 143, XV},
  year      = {2016},
  abstract  = {Diese Arbeit zu Grunde liegenden Forschung zielte darauf ab, neue schmelzbare Acrylnitril-Copolymere zu entwickeln. Diese sollten im Anschluss {\"u}ber ein Schmelzspinnverfahren zur Chemiefaser geformt und im letzten Schritt zur Carbonfaser konvertiert werden. Zu diesem Zweck wurden zun{\"a}chst orientierende Untersuchungen an unterschiedlichen Copolymeren des Acrylnitril aus L{\"o}sungspolymerisation durchgef{\"u}hrt. Die Untersuchungen zeigten, dass elektrostatische Wechselwirkungen besser als sterische Abschirmung dazu geeignet sind, Schmelzbarkeit unterhalb der Zersetzungstemperatur von Polyacrylnitril zu bewirken. Aus der Vielzahl untersuchter Copolymere stellten sich jene mit Methoxyethylacrylat (MEA) als am effektivsten heraus. F{\"u}r diese Copolymere wurden sowohl die Copolymerisationsparameter bestimmt als auch die grundlegende Kinetik der L{\"o}sungspolymerisation untersucht. Die Copolymere mit MEA wurden {\"u}ber Schmelzspinnen zur Faser umgeformt und diese dann untersucht. Hierbei wurden auch Einfl{\"u}sse verschiedener Parameter, wie z.B. die der Molmasse, auf die Fasereigenschaften und -herstellung untersucht. Zuletzt wurde ein Heterophasenpolymerisationsverfahren zur Herstellung von Copolymeren aus AN/MEA entwickelt; dadurch konnten die Materialeigenschaften weiter verbessert werden. Zur Unterdr{\"u}ckung der thermoplastischen Eigenschaften der Fasern wurde ein geeignetes Verfahren entwickelt und anschließend die Konversion zu Carbonfasern durchgef{\"u}hrt.},
  language  = {de}
}
@phdthesis{Leiendecker2016,
  author    = {Leiendecker, Mai-Thi},
  title     = {Physikalische Hydrogele auf Polyurethan-Basis},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103917},
  school      = {Universit{\"a}t Potsdam},
  pages     = {109},
  year      = {2016},
  abstract  = {Physical hydrogels have gained recent attention as cell substrates, since viscoelasticity or stress relaxation is a powerful parameter in mechanotransduction, which has long been neglected. We designed multi-functional polyurethanes to form physical hydrogels via a unique tunable gelation mechanism. The anionic polyurethanes spontaneously form aggregates in water that are kept in a soluble state through electrostatic repulsion. Fast subsequent gelation can be triggered by charge shielding which allows the aggregation and network building to proceed. This can be induced by adding either acids or salts, resulting in acidic (pH 4-5) or pH-neutral hydrogels, respectively. Whereas conventional polyurethane-based hydrogels are commonly prepared from toxic isocyanate precursors, the physical hydrogelation mechanism described here does not involve chemically reactive species which is ideal for in situ applications in sensitive environments. Both stiffness and stress relaxation can be tuned independently over a broad range and the gels exhibit excellent stress recovery behavior.},
  language  = {de}
}
@phdthesis{Fandrich2016,
  author    = {Fandrich, Artur},
  title     = {Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-396551},
  school      = {Universit{\"a}t Potsdam},
  pages     = {111},
  year      = {2016},
  abstract  = {Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis f{\"u}r die Entwicklung der responsiven Grenzfl{\"a}che dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in L{\"o}sungen haben gezeigt, dass der Tr{\"u}bungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenst{\"a}rke der L{\"o}sung abh{\"a}ngig ist. Nach der Charakterisierung der Polymere in L{\"o}sung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfl{\"a}che der Gold-Elektroden durchgef{\"u}hrt. W{\"a}hrend bei Polymeren I und II die Ankopplung auf einer Amidverbr{\"u}ckung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gew{\"a}hlt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-L{\"o}sungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung {\"u}ber Amidverbr{\"u}ckung lieferte d{\"u}nne Filme (10 - 15 nm), w{\"a}hrend der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfl{\"a}che relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberfl{\"a}chen in L{\"o}sungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich - ab einem kritischen Punkt (37 °C f{\"u}r Polymer I und 45 °C f{\"u}r Polymer II) wird zun{\"a}chst langsame Zunahme der Peakstr{\"o}me wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix f{\"u}r Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgef{\"u}hrt. Das hydrophile FLAG-TAG-Peptid ver{\"a}ndert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antik{\"o}rper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antik{\"o}rper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antik{\"o}rper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. F{\"u}r die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgew{\"a}hlt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringf{\"u}gig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode {\"a}hnelt dem der reinen Polymer III-Elektrode - die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich ver{\"a}ndert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Str{\"o}me f{\"u}r die HA-TAG-Elektroden sind deutlich geringer als die f{\"u}r die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zur{\"u}ckzuf{\"u}hren ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdr{\"a}ngt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies f{\"u}hrt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabh{\"a}ngigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolek{\"u}l deutlich besser f{\"u}r eine potentielle Verwendung der Polymer III-Filme f{\"u}r sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet.},
  language  = {de}
}
@phdthesis{Vacogne2016,
  author    = {Vacogne, Charlotte D.},
  title     = {New synthetic routes towards well-defined polypeptides, morphologies and hydrogels},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-396366},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xii, 175},
  year      = {2016},
  abstract  = {Proteins are natural polypeptides produced by cells; they can be found in both animals and plants, and possess a variety of functions. One of these functions is to provide structural support to the surrounding cells and tissues. For example, collagen (which is found in skin, cartilage, tendons and bones) and keratin (which is found in hair and nails) are structural proteins. When a tissue is damaged, however, the supporting matrix formed by structural proteins cannot always spontaneously regenerate. Tailor-made synthetic polypeptides can be used to help heal and restore tissue formation. Synthetic polypeptides are typically synthesized by the so-called ring opening polymerization (ROP) of α-amino acid N-carboxyanhydrides (NCA). Such synthetic polypeptides are generally non-sequence-controlled and thus less complex than proteins. As such, synthetic polypeptides are rarely as efficient as proteins in their ability to self-assemble and form hierarchical or structural supramolecular assemblies in water, and thus, often require rational designing. In this doctoral work, two types of amino acids, γ-benzyl-L/D-glutamate (BLG / BDG) and allylglycine (AG), were selected to synthesize a series of (co)polypeptides of different compositions and molar masses. A new and versatile synthetic route to prepare polypeptides was developed, and its mechanism and kinetics were investigated. The polypeptide properties were thoroughly studied and new materials were developed from them. In particular, these polypeptides were able to aggregate (or self-assemble) in solution into microscopic fibres, very similar to those formed by collagen. By doing so, they formed robust physical networks and organogels which could be processed into high water-content, pH-responsive hydrogels. Particles with highly regular and chiral spiral morphologies were also obtained by emulsifying these polypeptides. Such polypeptides and the materials derived from them are, therefore, promising candidates for biomedical applications.},
  language  = {en}
}
@phdthesis{Prinz2016,
  author    = {Prinz, Julia},
  title     = {DNA origami substrates as a versatile tool for surface-enhanced Raman scattering (SERS)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-104089},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xviii, 184 Seiten},
  year      = {2016},
  abstract  = {Surface-enhanced Raman scattering (SERS) is a promising tool to obtain rich chemical information about analytes at trace levels. However, in order to perform selective experiments on individual molecules, two fundamental requirements have to be fulfilled. On the one hand, areas with high local field enhancement, so-called "hot spots", have to be created by positioning the supporting metal surfaces in close proximity to each other. In most cases hot spots are formed in the gap between adjacent metal nanoparticles (NPs). On the other hand, the analyte has to be positioned directly in the hot spot in order to profit from the highest signal amplification. The use of DNA origami substrates provides both, the arrangement of AuNPs with nm precision as well as the ability to bind analyte molecules at predefined positions. Consequently, the present cumulative doctoral thesis aims at the development of a novel SERS substrate based on a DNA origami template. To this end, two DNA-functionalized gold nanoparticles (AuNPs) are attached to one DNA origami substrate resulting in the formation of a AuNP dimer and thus in a hot spot within the corresponding gap. The obtained structures are characterized by correlated atomic force microscopy (AFM) and SERS imaging which allows for the combination of structural and chemical information. Initially, the proof-of principle is presented which demonstrates the potential of the novel approach. It is shown that the Raman signal of 15 nm AuNPs coated with dye-modified DNA (dye: carboxytetramethylrhodamine (TAMRA)) is significantly higher for AuNP dimers arranged on a DNA origami platform in comparison to single AuNPs. Furthermore, by attaching single TAMRA molecules in the hot spot between two 5 nm AuNPs and optimizing the size of the AuNPs by electroless gold deposition, SERS experiments at the few-molecule level are presented. The initially used DNA origami-AuNPs design is further optimized in many respects. On the one hand, larger AuNPs up to a diameter of 60 nm are used which are additionally treated with a silver enhancement solution to obtain Au-Ag-core-shell NPs. On the other hand, the arrangement of both AuNPs is altered to improve the position of the dye molecule within the hot spot as well as to decrease the gap size between the two particles. With the optimized design the detection of single dye molecules (TAMRA and cyanine 3 (Cy3)) by means of SERS is demonstrated. Quantitatively, enhancement factors up to 10^10 are estimated which is sufficiently high to detect single dye molecules. In the second part, the influence of graphene as an additional component of the SERS substrate is investigated. Graphene is a two-dimensional material with an outstanding combination of electronical, mechanical and optical properties. Here, it is demonstrated that single layer graphene (SLG) replicates the shape of underlying non-modified DNA origami substrates very well, which enables the monitoring of structural alterations by AFM imaging. In this way, it is shown that graphene encapsulation significantly increases the structural stability of bare DNA origami substrates towards mechanical force and prolonged exposure to deionized water. Furthermore, SLG is used to cover DNA origami substrates which are functionalized with a 40 nm AuNP dimer. In this way, a novel kind of hybrid material is created which exhibits several advantages compared to the analogue non-covered SERS substrates. First, the fluorescence background of dye molecules that are located in between the AuNP surface and SLG is efficiently reduced. Second, the photobleaching rate of the incorporated dye molecules is decreased up to one order of magnitude. Third, due to the increased photostability of the investigated dye molecules, the performance of polarization-dependent series measurements on individual structures is enabled. This in turn reveals extensive information about the dye molecules in the hot spot as well as about the strain induced within the graphene lattice. Although SLG can significantly influence the SERS substrate in the aforementioned ways, all those effects are strongly related to the extent of contact with the underlying AuNP dimer.},
  language  = {en}
}
@phdthesis{Pampel2016,
  author    = {Pampel, Jonas},
  title     = {Ionothermal carbon materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101323},
  school      = {Universit{\"a}t Potsdam},
  pages     = {122, xlv},
  year      = {2016},
  abstract  = {Alternative concepts for energy storage and conversion have to be developed, optimized and employed to fulfill the dream of a fossil-independent energy economy. Porous carbon materials play a major role in many energy-related devices. Among different characteristics, distinct porosity features, e.g., specific surface area (SSA), total pore volume (TPV), and the pore size distribution (PSD), are important to maximize the performance in the final device. In order to approach the aim to synthesize carbon materials with tailor-made porosity in a sustainable fashion, the present thesis focused on biomass-derived precursors employing and developing the ionothermal carbonization. During the ionothermal carbonization, a salt melt simultaneously serves as solvent and porogen. Typically, eutectic mixtures containing zinc chloride are employed as salt phase. The first topic of the present thesis addressed the possibility to precisely tailor the porosity of ionothermal carbon materials by an experimentally simple variation of the molar composition of the binary salt mixture. The developed pore tuning tool allowed the synthesis of glucose derived carbon materials with predictable SSAs in the range of ~ 900 to ~ 2100 m2 g-1. Moreover, the nucleobase adenine was employed as precursor introducing nitrogen functionalities in the final material. Thereby, the chemical properties of the carbon materials are varied leading to new application fields. Nitrogen doped carbons (NDCs) are able to catalyze the oxygen reduction reaction (ORR) which takes place on the cathodic site of a fuel cell. The herein developed porosity tailoring allowed the synthesis of adenine derived NDCs with outstanding SSAs of up to 2900 m2 g-1 and very large TPV of 5.19 cm3 g-1. Furthermore, the influence of the porosity on the ORR could be directly investigated enabling the precise optimization of the porosity characteristics of NDCs for this application. The second topic addressed the development of a new method to investigate the not-yet unraveled mechanism of the oxygen reduction reaction using a rotating disc electrode setup. The focus was put on noble-metal free catalysts. The results showed that the reaction pathway of the investigated catalysts is pH-dependent indicating different active species at different pH-values. The third topic addressed the expansion of the used salts for the ionothermal approach towards hydrated calcium and magnesium chloride. It was shown that hydrated salt phases allowed the introduction of a secondary templating effect which was connected to the coexistence of liquid and solid salt phases. The method enabled the synthesis of fibrous NDCs with SSAs of up to 2780 m2 g-1 and very large TPV of 3.86 cm3 g-1. Moreover, the concept of active site implementation by a facile low-temperature metalation employing the obtained NDCs as solid ligands could be shown for the first time in the context of ORR. Overall, the thesis may pave the way towards highly porous carbon with tailor-made porosity materials prepared by an inexpensive and sustainable pathway, which can be applied in energy related field thereby supporting the needed expansion of the renewable energy sector.},
  language  = {en}
}
@phdthesis{Steeples2016,
  author    = {Steeples, Elliot},
  title     = {Amino acid-derived imidazolium salts: platform molecules for N-Heterocyclic carbene metal complexes and organosilica materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101861},
  school      = {Universit{\"a}t Potsdam},
  pages     = {139},
  year      = {2016},
  abstract  = {In the interest of producing functional catalysts from sustainable building-blocks, 1, 3-dicarboxylate imidazolium salts derived from amino acids were successfully modified to be suitable as N-Heterocyclic carbene (NHC) ligands within metal complexes. Complexes of Ag(I), Pd(II), and Ir(I) were successfully produced using known procedures using ligands derived from glycine, alanine, β-alanine and phenylalanine. The complexes were characterized in solid state using X-Ray crystallography, which allowed for the steric and electronic comparison of these ligands to well-known NHC ligands within analogous metal complexes. The palladium complexes were tested as catalysts for aqueous-phase Suzuki-Miyaura cross-coupling. Water-solubility could be induced via ester hydrolysis of the N-bound groups in the presence of base. The mono-NHC-Pd complexes were seen to be highly active in the coupling of aryl bromides with phenylboronic acid; the active catalyst of which was determined to be mostly Pd(0) nanoparticles. Kinetic studies determined that reaction proceeds quickly in the coupling of bromoacetophenone, for both pre-hydrolyzed and in-situ hydrolysis catalyst dissolution. The catalyst could also be recycled for an extra run by simply re-using the aqueous layer. The imidazolium salts were also used to produce organosilica hybrid materials. This was attempted via two methods: by post-grafting onto a commercial organosilica, and co-condensation of the corresponding organosilane. The co-condensation technique harbours potential for the production of solid-support catalysts.},
  language  = {en}
}
@phdthesis{Ledendecker2016,
  author    = {Ledendecker, Marc},
  title     = {En route towards advanced catalyst materials for the electrocatalytic water splitting reaction},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-93296},
  school      = {Universit{\"a}t Potsdam},
  pages     = {II, 148},
  year      = {2016},
  abstract  = {The thesis on hand deals with the development of new types of catalysts based on pristine metals and ceramic materials and their application as catalysts for the electrocatalytic water splitting reaction. In order to breathe life into this technology, cost-efficient, stable and efficient catalysts are imploringly desired. In this manner, the preparation of Mn-, N-, S-, P-, and C-containing nickel materials has been investigated together with the theoretical and electrochemical elucidation of their activity towards the hydrogen (and oxygen) evolution reaction. The Sabatier principle has been used as the principal guideline towards successful tuning of catalytic sites. Furthermore, two pathways have been chosen to ameliorate the electrocatalytic performance, namely, the direct improvement of intrinsic properties through appropriate material selection and secondly the increase of surface area of the catalytic material with an increased amount of active sites. In this manner, bringing materials with optimized hydrogen adsorption free energy onto high surface area support, catalytic performances approaching the golden standards of noble metals were feasible. Despite varying applied synthesis strategies (wet chemistry in organic solvents, ionothermal reaction, gas phase reaction), one goal has been systematically pursued: to understand the driving mechanism of the growth. Moreover, deeper understanding of inherent properties and kinetic parameters of the catalytic materials has been gained.},
  language  = {en}
}
@phdthesis{Riebe2016,
  author    = {Riebe, Daniel},
  title     = {Experimental and theoretical investigations of molecular ions by spectroscopy as well as ion mobility and mass spectrometry},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94632},
  school      = {Universit{\"a}t Potsdam},
  pages     = {143},
  year      = {2016},
  abstract  = {The aim of this thesis was the elucidation of different ionization methods (resonance-enhanced multiphoton ionization - REMPI, electrospray ionization - ESI, atmospheric pressure chemical ionization - APCI) in ion mobility (IM) spectrometry. In order to gain a better understanding of the ionization processes, several spectroscopic, mass spectrometric and theoretical methods were also used. Another focus was the development of experimental techniques, including a high resolution spectrograph and various combinations of IM and mass spectrometry. The novel high resolution 2D spectrograph facilitates spectroscopic resolutions in the range of commercial echelle spectrographs. The lowest full width at half maximum of a peak achieved was 25 pm. The 2D spectrograph is based on the wavelength separation of light by the combination of a prism and a grating in one dimension, and an etalon in the second dimension. This instrument was successfully employed for the acquisition of Raman and laser-induced breakdown spectra. Different spectroscopic methods (light scattering and fluorescence spectroscopy) permitting a spatial as well as spectral resolution, were used to investigate the release of ions in the electrospray. The investigation is based on the 50 nm shift of the fluorescence band of rhodamine 6G ions of during the transfer from the electrospray droplets to the gas phase. A newly developed ionization chamber operating at reduced pressure (0.5 mbar) was coupled to a time-of-flight mass spectrometer. After REMPI of H2S, an ionization chemistry analogous to H2O was observed with this instrument. Besides H2S+ and its fragments, H3S+ and protonated analyte ions could be observed as a result of proton-transfer reactions. For the elucidation of the peaks in IM spectra, a combination of IM spectrometer and linear quadrupole ion trap mass spectrometer was developed. The instrument can be equipped with various ionization sources (ESI, REMPI, APCI) and was used for the characterization of the peptide bradykinin and the neuroleptic promazine. The ionization of explosive compounds in an APCI source based on soft x-radiation was investigated in a newly developed ionization chamber attached to the ion trap mass spectrometer. The major primary and secondary reactions could be characterized and explosive compound ions could be identified and assigned to the peaks in IM spectra. The assignment is based on the comparison of experimentally determined and calculated IM. The methods of calculation currently available exhibit large deviations, especially in the case of anions. Therefore, on the basis of an assessment of available methods, a novel hybrid method was developed and characterized.},
  language  = {en}
}
@phdthesis{Ulaganathan2016,
  author    = {Ulaganathan, Vamseekrishna},
  title     = {Molecular fundamentals of foam fractionation},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94263},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 136},
  year      = {2016},
  abstract  = {Foam fractionation of surfactant and protein solutions is a process dedicated to separate surface active molecules from each other due to their differences in surface activities. The process is based on forming bubbles in a certain mixed solution followed by detachment and rising of bubbles through a certain volume of this solution, and consequently on the formation of a foam layer on top of the solution column. Therefore, systematic analysis of this whole process comprises of at first investigations dedicated to the formation and growth of single bubbles in solutions, which is equivalent to the main principles of the well-known bubble pressure tensiometry. The second stage of the fractionation process includes the detachment of a single bubble from a pore or capillary tip and its rising in a respective aqueous solution. The third and final stage of the process is the formation and stabilization of the foam created by these bubbles, which contains the adsorption layers formed at the growing bubble surface, carried up and gets modified during the bubble rising and finally ends up as part of the foam layer. Bubble pressure tensiometry and bubble profile analysis tensiometry experiments were performed with protein solutions at different bulk concentrations, solution pH and ionic strength in order to describe the process of accumulation of protein and surfactant molecules at the bubble surface. The results obtained from the two complementary methods allow understanding the mechanism of adsorption, which is mainly governed by the diffusional transport of the adsorbing protein molecules to the bubble surface. This mechanism is the same as generally discussed for surfactant molecules. However, interesting peculiarities have been observed for protein adsorption kinetics at sufficiently short adsorption times. First of all, at short adsorption times the surface tension remains constant for a while before it decreases as expected due to the adsorption of proteins at the surface. This time interval is called induction time and it becomes shorter with increasing protein bulk concentration. Moreover, under special conditions, the surface tension does not stay constant but even increases over a certain period of time. This so-called negative surface pressure was observed for BCS and BLG and discussed for the first time in terms of changes in the surface conformation of the adsorbing protein molecules. Usually, a negative surface pressure would correspond to a negative adsorption, which is of course impossible for the studied protein solutions. The phenomenon, which amounts to some mN/m, was rather explained by simultaneous changes in the molar area required by the adsorbed proteins and the non-ideality of entropy of the interfacial layer. It is a transient phenomenon and exists only under dynamic conditions. The experiments dedicated to the local velocity of rising air bubbles in solutions were performed in a broad range of BLG concentration, pH and ionic strength. Additionally, rising bubble experiments were done for surfactant solutions in order to validate the functionality of the instrument. It turns out that the velocity of a rising bubble is much more sensitive to adsorbing molecules than classical dynamic surface tension measurements. At very low BLG or surfactant concentrations, for example, the measured local velocity profile of an air bubble is changing dramatically in time scales of seconds while dynamic surface tensions still do not show any measurable changes at this time scale. The solution's pH and ionic strength are important parameters that govern the measured rising velocity for protein solutions. A general theoretical description of rising bubbles in surfactant and protein solutions is not available at present due to the complex situation of the adsorption process at a bubble surface in a liquid flow field with simultaneous Marangoni effects. However, instead of modelling the complete velocity profile, new theoretical work has been started to evaluate the maximum values in the profile as characteristic parameter for dynamic adsorption layers at the bubble surface more quantitatively. The studies with protein-surfactant mixtures demonstrate in an impressive way that the complexes formed by the two compounds change the surface activity as compared to the original native protein molecules and therefore lead to a completely different retardation behavior of rising bubbles. Changes in the velocity profile can be interpreted qualitatively in terms of increased or decreased surface activity of the formed protein-surfactant complexes. It was also observed that the pH and ionic strength of a protein solution have strong effects on the surface activity of the protein molecules, which however, could be different on the rising bubble velocity and the equilibrium adsorption isotherms. These differences are not fully understood yet but give rise to discussions about the structure of protein adsorption layer under dynamic conditions or in the equilibrium state. The third main stage of the discussed process of fractionation is the formation and characterization of protein foams from BLG solutions at different pH and ionic strength. Of course a minimum BLG concentration is required to form foams. This minimum protein concentration is a function again of solution pH and ionic strength, i.e. of the surface activity of the protein molecules. Although at the isoelectric point, at about pH 5 for BLG, the hydrophobicity and hence the surface activity should be the highest, the concentration and ionic strength effects on the rising velocity profile as well as on the foamability and foam stability do not show a maximum. This is another remarkable argument for the fact that the interfacial structure and behavior of BLG layers under dynamic conditions and at equilibrium are rather different. These differences are probably caused by the time required for BLG molecules to adapt respective conformations once they are adsorbed at the surface. All bubble studies described in this work refer to stages of the foam fractionation process. Experiments with different systems, mainly surfactant and protein solutions, were performed in order to form foams and finally recover a solution representing the foamed material. As foam consists to a large extent of foam lamella - two adsorption layers with a liquid core - the concentration in a foamate taken from foaming experiments should be enriched in the stabilizing molecules. For determining the concentration of the foamate, again the very sensitive bubble rising velocity profile method was applied, which works for any type of surface active materials. This also includes technical surfactants or protein isolates for which an accurate composition is unknown.},
  language  = {en}
}
@phdthesis{Klier2016,
  author    = {Klier, Dennis Tobias},
  title     = {Upconversion luminescence in Er-codoped NaYF4 nanoparticles},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98486},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 89},
  year      = {2016},
  abstract  = {In the context of an increasing population of aging people and a shift of medical paradigm towards an individualized medicine in health care, nanostructured lanthanides doped sodium yttrium fluoride (NaYF4) represents an exciting class of upconversion nanomaterials (UCNM) which are suitable to bring forward developments in biomedicine and -biodetection. Despite the fact that among various fluoride based upconversion (UC) phosphors lanthanide doped NaYF4 is one of the most studied upconversion nanomaterial, many open questions are still remaining concerning the interplay of the population routes of sensitizer and activator electronic states involved in different luminescence upconversion photophysics as well as the role of phonon coupling. The collective work aims to explore a detailed understanding of the upconversion mechanism in nanoscaled NaYF4 based materials co-doped with several lanthanides, e.g. Yb3+ and Er3+ as the "standard" type upconversion nanoparticles (UCNP) up to advanced UCNP with Gd3+ and Nd3+. Especially the impact of the crystal lattice structure as well as the resulting lattice phonons on the upconversion luminescence was investigated in detail based on different mixtures of cubic and hexagonal NaYF4 nanoscaled crystals. Three synthesis methods, depending on the attempt of the respective central spectroscopic questions, could be accomplished in the following work. NaYF4 based upconversion nanoparticles doped with several combination of lanthanides (Yb3+, Er3+, Gd3+ and Nd3+) were synthesized successfully using a hydrothermal synthesis method under mild conditions as well as a co-precipitation and a high temperature co-precipitation technique. Structural information were gathered by means of X-ray diffraction (XRD), electron microscopy (TEM), dynamic light scattering (DLS), Raman spectroscopy and inductively coupled plasma atomic emission spectrometry (ICP-OES). The results were discussed in detail with relation to the spectroscopic results. A variable spectroscopic setup was developed for multi parameter upconversion luminescence studies at various temperature 4 K to 328 K. Especially, the study of the thermal behavior of upconversion luminescence as well as time resolved area normalized emission spectra were a prerequisite for the detailed understanding of intramolecular deactivation processes, structural changes upon annealing or Gd3+ concentration, and the role of phonon coupling for the upconversion efficiency. Subsequently it became possible to synthesize UCNP with tailored upconversion luminescence properties. In the end, the potential of UCNP for life science application should be enunciated in context of current needs and improvements of a nanomaterial based optical sensors, whereas the "standard" UCNP design was attuned according to the special conditions in the biological matrix. In terms of a better biocompatibility due to a lower impact on biological tissue and higher penetrability for the excitation light. The first step into this direction was to use Nd3+ ions as a new sensitizer in tridoped NaYF4 based UCNP, whereas the achieved absolute and relative temperature sensitivity is comparable to other types of local temperature sensors in the literature.},
  language  = {en}
}
@phdthesis{Stahlhut2016,
  author    = {Stahlhut, Frank},
  title     = {Entwicklung neuer triphiler, fluorkohlenstofffreier Blockcopolymere und Untersuchung ihrer Eigenschaften f{\"u}r Multikompartiment-Mizellen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-96299},
  school      = {Universit{\"a}t Potsdam},
  pages     = {iv, 191},
  year      = {2016},
  abstract  = {Neue Systeme f{\"u}r triphile, fluorkohlenstofffreie Blockcopolymere in Form von Acrylat-basierten thermoresponsiven Blockcopolymeren sowie Acrylat- bzw. Styrol-basierten Terblock-Polyelektrolyten mit unterschiedlich chaotropen Kationen des jeweiligen polyanionischen Blocks wurden entwickelt. Multikompartiment-Mizellen, mizellare Aggregate mit ultrastrukturiertem hydrophobem Mizellkern die biologischen Strukturen wie dem Humanalbumin nachempfunden sind, sollten bei der Selbstorganisation in w{\"a}ssriger Umgebung entstehen. Durch Verwendung apolarer und polarer Kohlenwasserstoff-Dom{\"a}nen anstelle von fluorophilen Fluorkohlenstoff-Dom{\"a}nen sollte erstmals anhand solcher triphilen Systeme nachgewiesen werden, ob diese in der Lage zur selektiven Aufnahme hydrophober Substanzen in unterschiedliche Dom{\"a}nen des Mizellkerns sind. Mit Hilfe von sequentieller RAFT-Polymerisation wurden diese neuen triphilen Systeme hergestellt, die {\"u}ber einen permanent hydrophilen, eine permanent stark hydrophoben und einen dritten Block verf{\"u}gen, der durch externe Einfl{\"u}sse, speziell die Induzierung eines thermischen Coil-to-globule-{\"U}bergangs bzw. die Zugabe von organischen, hydrophoben Gegenionen von einem wasserl{\"o}slichen in einen polar-hydrophoben Block umgewandelt werden kann. Als RAFT-Agens wurde 4-(Trimethylsilyl)benzyl(3-(trimethylsilyl)-propyl)-trithiocarbonat mit zwei unterschiedlichen TMS-Endgruppen verwendet, das kontrollierte Reaktions-bedingungen sowie die molekulare Charakterisierung der komplexen Copolymere erm{\"o}glichte. Die beiden Grundtypen der linearen tern{\"a}ren Blockcopolymere wurden jeweils in zwei 2 Modell-Systeme, die geringf{\"u}gig in ihren chemischen Eigenschaften sowie in dem Blockl{\"a}ngenverh{\"a}ltnis von hydrophilen und hydrophoben Polymersegmenten variierten, realisiert und unterschiedliche Permutation der Bl{\"o}cke aufwiesen. Als ersten Polymertyp wurden amphiphile thermoresponsive Blockcopolymere verwendet. Modell-System 1 bestand aus dem permanent hydrophoben Block Poly(1,3-Bis(butylthio)-prop-2-yl-acrylat), permanent hydrophilen Block Poly(Oligo(ethylenglykol)monomethyletheracrylat) und den thermoresponsiven Block Poly(N,N'-Diethylacrylamid), dessen Homopolymer eine LCST-Phasen{\"u}bergang (LCST, engl.: lower critical solution temperature) bei ca. 36°C aufweist. Das Modell-System 2 bestand aus dem permanent hydrophilen Block Poly(2-(Methylsulfinyl)ethylacrylat), dem permanent hydrophoben Block Poly(2-Ethylhexylacrylat) und wiederum Poly(N,N'-Diethylacrylamid). Im tern{\"a}ren Blockcopolymer erh{\"o}hte sich, je nach Blocksequenz und relativen Blockl{\"a}ngen, der LCST-{\"U}bergang auf 50 - 65°C. Bei der Untersuchung der Selbstorganisation f{\"u}r die Polymer-Systeme dieses Typs wurde die Temperatur variiert, um verschieden mizellare {\"U}berstrukturen in w{\"a}ssriger Umgebung zu erzeugen bzw. oberhalb des LCST-{\"U}bergangs Multikompartiment-Mizellen nachzuweisen. Die Unterschiede in der Hydrophilie bzw. den sterischen Anspr{\"u}che der gew{\"a}hlten hydrophilen Bl{\"o}cke sowie die Variation der jeweiligen Blocksequenzen erm{\"o}glichte dar{\"u}ber hinaus die Bildung verschiedenster Morphologien mizellarer Aggregate. Der zweite Typ basierte auf ein Terblock-Polyelektrolyt-System mit Polyacrylaten bzw. Polystyrolen als Polymerr{\"u}ckgrat. Polymere ionische Fl{\"u}ssigkeiten wurden als Vorlage der Entwicklung zweier Modell-Systeme genommen. Eines der beiden Systeme bestand aus dem permanent hydrophilen Block Poly(Oligo(ethylenglykol)monomethyletheracrylat, dem permanent hydrophoben Block Poly(2-Ethylhexylacrylat) sowie dem Polyanion-Block Poly(3-Sulfopropylacrylat). Die Hydrophobie des Polyanion-Blocks variierte durch Verwendung großer organischer Gegenionen, n{\"a}mlich Tetrabutylammonium, Tetraphenylphosphonium und Tetraphenylstibonium. Analog wurde in einem weiteren System aus dem permanent hydrophilen Block Poly(4-Vinylbenzyltetrakis(ethylenoxy)methylether), dem permanent hydrophoben Block Poly(para-Methylstyrol) und Poly(4-Styrolsulfonat) mit den entsprechenden Gegenionen gebildet. Aufgrund unterschiedlicher Kettensteifigkeit in beiden Modell-Systemen sollte es bei der Selbstorganisation der mizellarer Aggregate zu unterschiedlichen {\"U}berstrukturen kommen. Mittels DSC-Messungen konnte nachgewiesen werden, dass f{\"u}r alle Modell-Systeme die Bl{\"o}cke in Volumen-Phase miteinander inkompatibel waren, was eine Voraussetzung f{\"u}r Multikompartimentierung von mizellaren Aggregaten ist. Die Gr{\"o}ße mizellarer Aggregate sowie der Einfluss externer Einfl{\"u}sse wie der Ver{\"a}nderung der Temperatur bzw. der Hydrophobie und Gr{\"o}ße von Gegenionen auf den hydrodynamischen Durchmesser mittels DLS-Untersuchungen wurden f{\"u}r alle Modell-Systeme untersucht. Die Ergebnisse zu den thermoresponsiven tern{\"a}ren Blockcopolymeren belegten , dass sich oberhalb der Phasen{\"u}bergangstemperatur des thermoresponsiven Blocks die Struktur der mizellaren Aggregate {\"a}nderte, indem der p(DEAm)-Block scheinbar kollabierte und so zusammen mit den permanent hydrophoben Block den jeweiligen Mizellkern bildete. Nach gewisser Equilibrierungszeit konnten bei Raumtemperatur dir urspr{\"u}nglichen mizellaren Strukturen regeneriert werden. Hingegen konnte f{\"u}r die Terblock-Polyelektrolyt-Systeme bei Verwendung der unterschiedlich hydrophoben Gegenionen kein signifikanter Unterschied in der Gr{\"o}ße der mizellaren Aggregate beobachtet werden. Zur Abbildung der mizellaren Aggregate mittels kryogene Transmissionselektronenmikroskopie (cryo-TEM) der mizellaren Aggregate war mit Poly(1,3-Bis(butylthio)-prop-2-yl-acrylat) ein Modell-System so konzipiert, dass ein erh{\"o}hter Elektronendichtekontrast durch Schwefel-Atome die Visualisierung ultrastrukturierter hydrophober Mizellkerne erm{\"o}glichte. Dieser Effekt sollte in den Terblock-Polyelektrolyt-Systemen auch durch die Gegenionen Tetraphenylphosphonium und Tetraphenylstibonium nachgestellt werden. W{\"a}hrend bei den thermoresponsiven Systemen auch oberhalb des Phasen{\"u}bergangs kein Hinweis auf Ultrastrukturierung beobachtet wurde, waren f{\"u}r die Polyelektrolyt-Systeme, insbesondere im Fall von Tetraphenylstibonium als Gegenion {\"U}berstrukturen zu erkennen. Der Nachweis der Bildung von Multikompartiment-Mizellen war f{\"u}r beide Polymertypen mit dieser abbildenden Methode nicht m{\"o}glich. Die Unterschiede in der Elektronendichte einzelner Bl{\"o}cke m{\"u}sste m{\"o}glicherweise weiter erh{\"o}ht werden um Aussagen diesbez{\"u}glich zu treffen. Die Untersuchung von ortsspezifischen Solubilisierungsexperimenten mit solvatochromen Fluoreszenzfarbstoffen mittels „steady-state"-Fluoreszenzspektroskopie durch Vergleich der Solubilisierungsorte der Terblockcopolymere bzw. -Polyelektrolyte mit den jeweiligen Solubilisierungsorten von Homopolymer- und Diblock-Vorstufen sollten den qualitativen Nachweis der Multikompartimentierung erbringen. Aufgrund der geringen Mengen an Farbstoff, die f{\"u}r die Solubilisierungsexperimente eingesetzt wurden zeigten DLS-Untersuchungen keine st{\"o}renden Effekte der Sonden auf die Gr{\"o}ße der mizellaren Aggregate. Jedoch erschwerten Quench-Effekte im Falle der Polyelektrolyt Modell-Systeme eine klare Interpretation der Daten. Im Falle der Modell-Systeme der thermoresponsiven Blockcopolymere waren dagegen deutliche solvatochrome Effekte zwischen der Solubilisierung in den mizellaren Aggregaten unterhalb und oberhalb des Phasen{\"u}bergangs zu erkennen. Dies k{\"o}nnte ein Hinweis auf Multikompartimentierung oberhalb des LCST-{\"U}bergangs sein. Ohne die Informationen einer Strukturanalyse wie z.B. der R{\"o}ntgen- oder Neutronenkleinwinkelstreuung (SAXS oder SANS), kann nicht abschließend gekl{\"a}rt werden, ob die Solubilisierung in mizellaren hydrophoben Dom{\"a}nen des kollabierten Poly(N,N'-Diethylacrylamid) erfolgt oder in einer Mischform von mizellaren Aggregaten mit gemittelter Polarit{\"a}t.},
  language  = {de}
}
@phdthesis{Mai2016,
  author    = {Mai, Tobias},
  title     = {Polymerunterst{\"u}tzte Calciumphosphatmineralisation},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-89056},
  school      = {Universit{\"a}t Potsdam},
  year      = {2016},
  abstract  = {Im Verlauf dieser Arbeit sind Blockcopolymere verschiedener Ladung auf Basis von PEO mit hohen Molekulargewichten durch lebendende freie radikalische Polymerisation hergestellt worden. Die Polymere sind einfach im Grammmaßstab herstellbar. Sie zeigen sowohl einen großen Einfluss auf die Nukleation als auch auf die Aufl{\"o}sung von Calciumphosphat. Gleichwohl scheint das Vorhandensein von positiven Gruppen (Kationen, Ampholyten und Betainen) keinen dramatischen Einfluss auf die Nukleation zu haben. So verursachen Polymere mit positiven Ladungen die gleiche Retentionwirkung wie solche, die ausschließlich anionische Gruppen enthalten. Aus der Verwendung der kationischen, ampholytischen und betainischen Copolymere resultiert allerdings eine andersartige Morphologie der Niederschl{\"a}ge, als aus der Verwendung der Anionischen hervorgeht. Bei der Stabilisierung einer HAP-Oberfl{\"a}che setzt sich dieser Trend fort, das heißt, rein anionische Copolymere wirken st{\"a}rker stabilisierend als solche, die positive Ladungen enthalten. Durch Inkubation von menschlichem Zahnschmelz mit anionischen Copolymeren konnte gezeigt werden, dass die Biofilmbildung verglichen mit einer unbehandelten Zahnoberfl{\"a}che eingeschr{\"a}nkt abl{\"a}uft. All dies macht die Polymere zu interessanten Additiven f{\"u}r Zahnpflegeprodukte. Zus{\"a}tzlich konnten auf Basis dieser rein anionischen Copolymere Polymerb{\"u}rsten, ebenfalls {\"u}ber lebendende freie radikalische Polymerisation, hergestellt werden. Diese zeichnen sich durch einen großen Einfluss auf die Kristallphase aus und bilden mit dem CHAP des AB-Types das Material, welches auch in Knochen und Z{\"a}hnen vorkommt. Erste Cytotoxizit{\"a}tstests lassen auf das große Potential dieser Polymerb{\"u}rsten f{\"u}r Beschichtungen in der Medizintechnik schließen.},
  language  = {de}
}
@phdthesis{Ehlert2016,
  author    = {Ehlert, Christopher},
  title     = {Simulationen von R{\"o}ntgenabsorptionsprozessen zur Charakterisierung von Systemen in kondensierter Phase},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-104844},
  school      = {Universit{\"a}t Potsdam},
  pages     = {142},
  year      = {2016},
  abstract  = {Die vorgelegte Dissertation pr{\"a}sentiert wissenschaftliche Ergebnisse, die in der Zeit vom Dezember 2012 bis August 2016, erarbeitet wurden. Der zentrale Inhalt der Arbeit ist die Simulation von R{\"o}ntgenabsorptionsprozessen von verschiedenen Systemen in kondensierter Phase. Genauer gesagt, werden Nahkantenabsorptions- (NEXAFS) sowie R{\"o}ntgenphotoelektronenspektren (XPS) berechnet. In beiden F{\"a}llen wird ein R{\"o}ntgenphoton von einem molekularen System absorbiert. Aufgrund der hohen Photonenenergie wird ein stark gebundenes kernnahes Elektron angeregt. Bei der XPS gelangt dieses mit einer zu messenden kinetischen Energie in Kontinuumszust{\"a}nde. In Abh{\"a}ngigkeit der eingestrahlten Photonenenergie und der kinetischen Energie des austreten Elektrons, kann die Bindungsenergie berechnet werden, welche die zentrale Gr{\"o}ße der XPS ist. Im Falle der NEXAFS-Spektroskopie wird das kernnahe Elektron in unbesetzte gebundene Zust{\"a}nde angeregt. Die zentrale Gr{\"o}ße ist die Absorption als Funktion der eingestrahlten Photonenenergie. Das erste Kapitel meiner Arbeit er{\"o}rtert detailliert die experimentellen Methoden sowie die daraus gewonnenen charakteristischen Gr{\"o}ßen. Die experimentellen Spektren zeigen oft viele Resonanzen, deren Interpretation aufgrund fehlender Referenzmaterialien schwierig ist. In solchen F{\"a}llen bietet es sich an, die Spektren mittels quantenchemischer Methoden zu simulieren. Der daf{\"u}r erforderliche mathematisch-physikalische Methodenkatalog wird im zweiten Kapitel der Arbeit er{\"o}rtert. Das erste von mir untersuchte System ist Graphen. In experimentellen Arbeiten wurde die Oberfl{\"a}che mittels Bromplasma modifiziert. Die im Anschluss gemessenen NEXAFS-Spektren unterscheiden sich maßgeblich von den Spektren der unbehandelten Oberfl{\"a}che. Mithilfe periodischer DFT-Rechnungen wurden verschiedene Gitterdefekte sowie bromierte Systeme untersucht und die NEXAFS-Spektren simuliert. Mittels der Simulationen k{\"o}nnen die Beitr{\"a}ge verschiedener Anregungszentren analysiert werden. Die Berechnungen erlauben den Schluss, dass Gitterdefekte maßgeblich f{\"u}r die entstandenen Ver{\"a}nderungen verantwortlich sind. Polyvinylalkohol (PVA) wurde als zweites System behandelt. Hierbei sollte untersucht werden, wie groß der Einfluss der Molekularbewegung auf die Verbreiterung der Peaks im XP-Spektrum ist. Des Weiteren wurde untersucht, wie groß der Einfluss von intermolekularen Wechselwirkungen auf die Peakpositionen und Peakverbreiterung ist. F{\"u}r die Berechnung dieses Systems wurde eine Kombination aus molekulardynamischen und quantenchemischen Methoden verwendet. Als Strukturen dienten Oligomermodelle, die unter dem Einfluss eines (ab initio) Potentials propagiert wurden. Entlang der erstellten Trajektorie wurden Schnappsch{\"u}sse der Geometrien extrahiert und f{\"u}r die Berechnung der XP-Spektren verwendet. Die Spektren werden bereits mithilfe klassischer Molekulardynamik sehr gut reproduziert. Die erhaltenen Peakbreiten sind verglichen mit dem Experiment allerdings zu klein. Die Hauptursache der Peakverbreiterung ist die Molekularbewegung. Intermolekulare Wechselwirkungen verschieben die Peakpositionen um 0.6 eV zu kleineren Anregungsenergien. Im dritten Teil der Arbeit stehen die NEXAFS-Spektren von ionischen Fl{\"u}ssigkeiten (ILs) im Fokus. Die experimentell gefundenen Spektren zeigen eine komplexe Struktur mit vielen Resonanzen. In der Arbeit wurden zwei ILs untersucht. Als Geometrien verwenden wir Clustermodelle, die aus experimentellen Kristallstrukturen extrahiert wurden. Die berechneten Spektren erlauben es, die Resonanzen den Anregungszentren zuzuordnen. Außerdem kann eine erstmals gemessene Doppelresonanz simuliert und erkl{\"a}rt werden. Insgesamt kann die Interpretation der Spektren mithilfe der Simulation signifikant erweitert werden. In allen Systemen wurde zur Berechnung des NEXAFS-Spektrums eine auf Dichtefunktionaltheorie basierende Methode verwendet (die sogenannte Transition-Potential Methode). G{\"a}ngige wellenfunktionsbasierte Methoden, wie die Konfigurationswechselwirkung mit Einfachanregungen (CIS), zeigen eine starke Blauverschiebung, wenn als Referenz eine Hartree-Fock Slaterdeterminante verwendet wird. Wir zeigen, dass die Verwendung von kernnah-angeregten Determinanten sowohl das resultierende Spektrum als auch die Anregungsenergien deutlich verbessert. Des Weiteren werden auch Referenzen aus Dichtefunktionalrechnungen getestet. Zus{\"a}tzlich werden auch Referenzen mit gebrochenen Besetzungszahlen f{\"u}r kernnahe Elektronen verwendet. In der Arbeit werden die Resultate der verschiedenen Referenzen miteinander verglichen. Es zeigt sich, dass Referenzen mit gebrochenen Besetzungszahlen das Spektrum nicht weiter verbessern. Der Einfluss der verwendeten Elektronenstrukturmethode ist eher gering.},
  language  = {de}
}