@phdthesis{Ziege2022,
  author    = {Ziege, Ricardo},
  title     = {Growth dynamics and mechanical properties of E. coli biofilms},
  doi       = {10.25932/publishup-55986},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559869},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 123},
  year      = {2022},
  abstract  = {Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers. This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers. On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis. E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications. Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions. All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields.},
  language  = {en}
}
@phdthesis{Irmscher2020,
  author    = {Irmscher, Tobias},
  title     = {Enzymatic remodelling of the exopolysaccharide stewartan network},
  doi       = {10.25932/publishup-47248},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472486},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 170},
  year      = {2020},
  abstract  = {In nature, bacteria are found to reside in multicellular communities encased in self-produced extracellular matrices. Indeed, biofilms are the default lifestyle of the bacteria which cause persistent infections in humans. The biofilm assembly protects bacterial cells from desiccation and limits the effectiveness of antimicrobial treatments. A myriad of biomolecules in the extracellular matrix, including proteins, exopolysaccharides, lipids, extracellular DNA and other, form a dense and viscoelastic three dimensional network. Many studies emphasized that a destabilization of the mechanical integrity of biofilm architectures potentially eliminates the protective shield and renders bacteria more susceptible to the immune system and antibiotics. Pantoea stewartii is a plant pathogen which infects monocotyledons such as maize and sweet corn. These bacteria produce dense biofilms in the xylem of infected plants which cause wilting of plants and crops. Stewartan is an exopolysaccharide which is produced by Pantoea stewartii and secreted as the major component to the extracellular matrix. It consists of heptasaccharide repeating units with a high degree of polymerization (2-4 MDa). In this work, the physicochemical properties of stewartan were investigated to understand the contributions of this exopolysaccharide to the mechanical integrity and cohesiveness of Pantoea stewartii biofilms. Therefore, a coarse-grained model of stewartan was developed with computational techniques to obtain a model for its three dimensional structural features. Here, coarse-grained molecular dynamic simulations revealed that the exopolysaccharide forms a hydrogel in which the exopolysaccharide chains arrange into a three dimensional mesh-like network. Simulations at different concentrations were used to investigate the influence of the water content on the network formation. Stewartan was further purified from 72 h grown Pantoea stewartii biofilms and the diffusion of bacteriophage and differently-sized nanoparticles (which ranged from 1.1 to 193 nm diameter) was analyzed in reconstituted stewartan solutions. Fluorescence correlation spectroscopy and single-particle tracking revealed that the stewartan network impeded the mobility of a set of differently-sized fluorescent particles in a size-dependent manner. Diffusion of these particles became more anomalous, as characterized by fitting the diffusion data to an anomalous diffusion model, with increasing stewartan concentrations. Further bulk and microrheological experiments were used to analyze the transitions in stewartan fluid behavior and stewartan chain entanglements were described. Moreover, it was noticed, that a small fraction of bacteriophage particles was trapped in small-sized pores deviating from classical random walks which highlighted the structural heterogeneity of the stewartan network. Additionally, the mobility of fluorescent particles also depended on the charge of the stewartan exopolysaccharide and a model of a molecular sieve for the stewartan network was proposed. The here reported structural features of the stewartan polymers were used to provide a detailed description of the mechanical properties of typically glycan-based biofilms such as the one from Pantoea stewartii. In addition, the mechanical properties of the biofilm architecture are permanently sensed by the embedded bacteria and enzymatic modifications of the extracellular matrix take place to address environmental cues. Hence, in this work the influence of enzymatic degradation of the stewartan exopolysaccharides on the overall exopolysaccharide network structure was analyzed to describe relevant physiological processes in Pantoea stewartii biofilms. Here, the stewartan hydrolysis kinetics of the tailspike protein from the ΦEa1h bacteriophage, which is naturally found to infect Pantoea stewartii cells, was compared to WceF. The latter protein is expressed from the Pantoea stewartii stewartan biosynthesis gene cluster wce I-III. The degradation of stewartan by the ΦEa1h tailspike protein was shown to be much faster than the hydrolysis kinetics of WceF, although both enzymes cleaved the β D GalIII(1→3)-α-D-GalI glycosidic linkage from the stewartan backbone. Oligosaccharide fragments which were produced during the stewartan cleavage, were analyzed in size-exclusion chromatography and capillary electrophoresis. Bioinformatic studies and the analysis of a WceF crystal structure revealed a remarkably high structural similarity of both proteins thus unveiling WceF as a bacterial tailspike-like protein. As a consequence, WceF might play a role in stewartan chain length control in Pantoea stewartii biofilms.},
  language  = {en}
}
@phdthesis{Kettner2018,
  author    = {Kettner, Marie Therese},
  title     = {Microbial colonization of microplastic particles in aquatic systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418854},
  school      = {Universit{\"a}t Potsdam},
  pages     = {139},
  year      = {2018},
  abstract  = {The continuously increasing pollution of aquatic environments with microplastics (plastic particles < 5 mm) is a global problem with potential implications for organisms of all trophic levels. For microorganisms, trillions of these floating microplastics particles represent a huge surface area for colonization. Due to the very low biodegradability, microplastics remain years to centuries in the environment and can be transported over thousands of kilometers together with the attached organisms. Since also pathogenic, invasive, or otherwise harmful species could be spread this way, it is essential to study microplastics-associated communities. For this doctoral thesis, eukaryotic communities were analyzed for the first time on microplastics in brackish environments and compared to communities in the surrounding water and on the natural substrate wood. With Illumina MiSeq high-throughput sequencing, more than 500 different eukaryotic taxa were detected on the microplastics samples. Among them were various green algae, dinoflagellates, ciliates, fungi, fungal-like protists and small metazoans such as nematodes and rotifers. The most abundant organisms was a dinoflagellate of the genus Pfiesteria, which could include fish pathogenic and bloom forming toxigenic species. Network analyses revealed that there were numerous interaction possibilities among prokaryotes and eukaryotes in microplastics biofilms. Eukaryotic community compositions on microplastics differed significantly from those on wood and in water, and compositions were additionally distinct among the sampling locations. Furthermore, the biodiversity was clearly lower on microplastics in comparison to the diversity on wood or in the surrounding water. In another experiment, a situation was simulated in which treated wastewater containing microplastics was introduced into a freshwater lake. With increasing microplastics concentrations, the resulting bacterial communities became more similar to those from the treated wastewater. Moreover, the abundance of integrase I increased together with rising concentrations of microplastics. Integrase I is often used as a marker for anthropogenic environmental pollution and is further linked to genes conferring, e.g., antibiotic resistance. This dissertation gives detailed insights into the complexity of prokaryotic and eukaryotic communities on microplastics in brackish and freshwater systems. Even though microplastics provide novel microhabitats for various microbes, they might also transport toxigenic, pathogenic, antibiotic-resistant or parasitic organisms; meaning their colonization can pose potential threats to humans and the environment. Finally, this thesis explains the urgent need for more research as well as for strategies to minimize the global microplastic pollution.},
  language  = {en}
}
@phdthesis{Lerm2012,
  author    = {Lerm, Stephanie},
  title     = {Mikroorganismen in geothermischen Aquiferen : Einfluss mikrobieller Prozesse auf den Anlagenbetrieb},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-63705},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {In Fluid-, Filter- und Sedimentproben von vier geothermischen Anlagen des Norddeutschen Beckens wurden mit molekulargenetischen Verfahren unterschiedliche mikrobielle Gemeinschaften nachgewiesen. Die mikrobielle Zusammensetzung in den Prozessw{\"a}ssern wurde dabei durch die Aquiferteufe, die Salinit{\"a}t, die Temperatur und den verf{\"u}gbaren Elektronendonatoren und -akzeptoren beeinflusst. Die in den anoxischen Prozessw{\"a}ssern identifizierten Organismen zeichneten sich durch einen chemoheterotrophen oder chemoautotrophen Stoffwechsel aus, wobei Nitrat, Sulfat, Eisen (III) oder Bikarbonat als terminale Elektronenakzeptoren fungierten. Mikroorganismen beeinflussten den Betrieb von zwei Anlagen negativ. So reduzierten im Prozesswasser des K{\"a}ltespeichers am Berliner Reichstag vorhandene Eisenoxidierer, nahe verwandt zu der Gattung Gallionella, die Injektivit{\"a}t der Bohrungen durch Eisenhydroxidausf{\"a}llungen in den Filterschlitzen. Biofilme, die von schwefeloxidierenden Bakterien der Gattung Thiothrix in den Filtern der obert{\"a}gigen Anlage gebildet wurden, f{\"u}hrten ebenfalls zu Betriebsst{\"o}rungen, indem sie die Injektion des Fluids in den Aquifer behinderten. Beim W{\"a}rmespeicher in Neubrandenburg waren Sulfatreduzierer vermutlich an der Bildung von Eisensulfidausf{\"a}llungen in den obert{\"a}gigen Filtern und im bohrlochnahen Bereich beteiligt und verst{\"a}rkten Korrosionsprozesse an der Pumpe im Bohrloch der kalten Aquiferseite. Organische S{\"a}uren in den Fluiden sowie mineralische Ausf{\"a}llungen in den Filtern der obert{\"a}gigen Anlagen waren Belege f{\"u}r die Aktivit{\"a}t der in den verschiedenen Anlagen vorhandenen Mikroorganismen. Es wurde zudem deutlich, dass Mikroorganismen auf Grund der hohen Durchflussraten in den Anlagen chemische Ver{\"a}nderungen in den Prozessw{\"a}ssern deutlich sensitiver anzeigen als chemische Analyseverfahren. So deuteten {\"A}nderungen in der Zusammensetzung der mikrobiellen Bioz{\"o}nosen und speziell die Identifikation von Indikatororganismen wie Eisen- und Schwefeloxidierern, fermentativen Bakterien und Sulfatreduzierern auf eine erh{\"o}hte Verf{\"u}gbarkeit von Elektronendonatoren oder akzeptoren in den Prozessw{\"a}ssern hin. Die Ursachen f{\"u}r die an den Geothermieanlagen auftretenden Betriebsst{\"o}rungen konnten dadurch erkannt werden.},
  language  = {de}
}