@article{TaguchiGotoMatsuokaetal.2023, author = {Taguchi, Mioko and Goto, Mutsuo and Matsuoka, Koji and Tiedemann, Ralph and Pastene, Luis A.}, title = {Population genetic structure of Bryde's whales (Balaenoptera brydei) on the central and western North Pacific feeding grounds}, series = {Canadian Journal of Fisheries and Aquatic Sciences}, volume = {80}, journal = {Canadian Journal of Fisheries and Aquatic Sciences}, number = {1}, publisher = {Canadian science publishing}, address = {Ottawa}, issn = {0706-652X}, doi = {10.1139/cjfas-2022-0005}, pages = {142 -- 155}, year = {2023}, abstract = {The genetic structure of Bryde's whale (Balaenoptera brydei) on the central and western North Pacific feeding grounds was investigated using a total of 1195 mitochondrial control region sequences and 1182 microsatellite genotypes at 17 loci in specimens collected from three longitudinal areas, 1W (135 degrees E-165 degrees E), 1E (165 degrees E-180 degrees), and 2 (180 degrees-155 degrees W). Genetic diversities were similar among areas and a haplotype network did not show any geographic structure, while an analysis of molecular variance found evidence of genetic structure in this species. Pairwise FST and G'ST estimates and heterogeneity tests attributed this structure to weak but significant differentiation between areas 1W/1E and 2. A Mantel test and a high-resolution analysis of genetic diversity statistics showed a weak spatial cline of genetic differentiation. These findings could be reconciled by two possible stock structure scenarios: (1) a single population with kin-association affecting feeding ground preference and (2) two populations with feeding ground preference for either area 1W or area 2. An estimated dispersal rate between areas 1W and 2 indicates that both scenarios should be considered as a precautionary principle in stock assessments.}, language = {en} } @article{MalchowBocediPalmeretal.2021, author = {Malchow, Anne-Kathleen and Bocedi, Greta and Palmer, Stephen C. F. and Travis, Justin M. J. and Zurell, Damaris}, title = {RangeShiftR: an R package for individual-based simulation of spatial eco-evolutionary dynamics and speciesu0027 responses to environmental changes}, series = {Ecography}, volume = {44}, journal = {Ecography}, number = {10}, publisher = {John Wiley \& Sons, Inc.}, address = {New Jersey}, issn = {1600-0587}, pages = {10}, year = {2021}, abstract = {Reliably modelling the demographic and distributional responses of a species to environmental changes can be crucial for successful conservation and management planning. Process-based models have the potential to achieve this goal, but so far they remain underused for predictions of species' distributions. Individual-based models offer the additional capability to model inter-individual variation and evolutionary dynamics and thus capture adaptive responses to environmental change. We present RangeShiftR, an R implementation of a flexible individual-based modelling platform which simulates eco-evolutionary dynamics in a spatially explicit way. The package provides flexible and fast simulations by making the software RangeShifter available for the widely used statistical programming platform R. The package features additional auxiliary functions to support model specification and analysis of results. We provide an outline of the package's functionality, describe the underlying model structure with its main components and present a short example. RangeShiftR offers substantial model complexity, especially for the demographic and dispersal processes. It comes with elaborate tutorials and comprehensive documentation to facilitate learning the software and provide help at all levels. As the core code is implemented in C++, the computations are fast. The complete source code is published under a public licence, making adaptations and contributions feasible. The RangeShiftR package facilitates the application of individual-based and mechanistic modelling to eco-evolutionary questions by operating a flexible and powerful simulation model from R. It allows effortless interoperation with existing packages to create streamlined workflows that can include data preparation, integrated model specification and results analysis. Moreover, the implementation in R strengthens the potential for coupling RangeShiftR with other models.}, language = {en} } @article{MalchowBocediPalmeretal.2021, author = {Malchow, Anne-Kathleen and Bocedi, Greta and Palmer, Stephen C. F. and Travis, Justin M. J. and Zurell, Damaris}, title = {RangeShiftR}, series = {Ecography : pattern and diversity in ecology / Nordic Ecologic Society Oikos}, volume = {44}, journal = {Ecography : pattern and diversity in ecology / Nordic Ecologic Society Oikos}, number = {10}, publisher = {Wiley-Blackwell}, address = {Oxford [u.a.]}, issn = {1600-0587}, doi = {10.1111/ecog.05689}, pages = {1443 -- 1452}, year = {2021}, abstract = {Reliably modelling the demographic and distributional responses of a species to environmental changes can be crucial for successful conservation and management planning. Process-based models have the potential to achieve this goal, but so far they remain underused for predictions of species' distributions. Individual-based models offer the additional capability to model inter-individual variation and evolutionary dynamics and thus capture adaptive responses to environmental change. We present RangeShiftR, an R implementation of a flexible individual-based modelling platform which simulates eco-evolutionary dynamics in a spatially explicit way. The package provides flexible and fast simulations by making the software RangeShifter available for the widely used statistical programming platform R. The package features additional auxiliary functions to support model specification and analysis of results. We provide an outline of the package's functionality, describe the underlying model structure with its main components and present a short example. RangeShiftR offers substantial model complexity, especially for the demographic and dispersal processes. It comes with elaborate tutorials and comprehensive documentation to facilitate learning the software and provide help at all levels. As the core code is implemented in C++, the computations are fast. The complete source code is published under a public licence, making adaptations and contributions feasible. The RangeShiftR package facilitates the application of individual-based and mechanistic modelling to eco-evolutionary questions by operating a flexible and powerful simulation model from R. It allows effortless interoperation with existing packages to create streamlined workflows that can include data preparation, integrated model specification and results analysis. Moreover, the implementation in R strengthens the potential for coupling RangeShiftR with other models.}, language = {en} } @article{SandhageHofmannLinstaedterKindermannetal.2021, author = {Sandhage-Hofmann, Alexandra and Linst{\"a}dter, Anja and Kindermann, Liana and Angombe, Simon and Amelung, Wulf}, title = {Conservation with elevated elephant densities sequesters carbon in soils despite losses of woody biomass}, series = {Global change biology}, volume = {27}, journal = {Global change biology}, number = {19}, publisher = {Blackwell Science}, address = {Oxford [u.a.]}, issn = {1354-1013}, doi = {10.1111/gcb.15779}, pages = {4601 -- 4614}, year = {2021}, abstract = {Nature conservation and restoration in terrestrial ecosystems is often focused on increasing the numbers of megafauna, expecting them to have positive impacts on ecological self-regulation processes and biodiversity. In sub-Saharan Africa, conservation efforts also aspire to protect and enhance biodiversity with particular focus on elephants. However, elephant browsing carries the risk of woody biomass losses. In this context, little is known about how increasing elephant numbers affects carbon stocks in soils, including the subsoils. We hypothesized that (1) increasing numbers of elephants reduce tree biomass, and thus the amount of C stored therein, resulting (2) in a loss of soil organic carbon (SOC). If true, a negative carbon footprint could limit the sustainability of elephant conservation from a global carbon perspective. To test these hypotheses, we selected plots of low, medium, and high elephant densities in two national parks and adjacent conservancies in the Namibian component of the Kavango Zambezi Transfrontier Area (KAZA), and quantified carbon storage in both woody vegetation and soils (1 m). Analyses were supplemented by the assessment of soil carbon isotopic composition. We found that increasing elephant densities resulted in a loss of tree carbon storage by 6.4 t ha(-1). However, and in contrast to our second hypothesis, SOC stocks increased by 4.7 t ha(-1) with increasing elephant densities. These higher SOC stocks were mainly found in the topsoil (0-30 cm) and were largely due to the formation of SOC from woody biomass. A second carbon input source into the soils was megaherbivore dung, which contributed with 0.02-0.323 t C ha(-1) year(-1) to ecosystem carbon storage in the low and high elephant density plots, respectively. Consequently, increasing elephant density does not necessarily lead to a negative C footprint, as soil carbon sequestration and transient C storage in dung almost compensate for losses in tree biomass.}, language = {en} } @article{PaetzigKalettkaOnandiaetal.2020, author = {P{\"a}tzig, Marlene and Kalettka, Thomas and Onandia, Gabriela and Balla, Dagmar and Lischeid, Gunnar}, title = {How much information do we gain from multiple-year sampling in natural pond research?}, series = {Limnologica : ecology and management of inland waters}, volume = {80}, journal = {Limnologica : ecology and management of inland waters}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, issn = {0075-9511}, doi = {10.1016/j.limno.2019.125728}, pages = {10}, year = {2020}, abstract = {Natural ponds are perceived as spatially and temporally highly variable ecosystems. This perception is in contrast to the often-applied sampling design with high spatial but low temporal replication. Based on a data set covering a period of six years and 20 permanently to periodically inundated ponds, we investigated whether this widely applied sampling design is sufficient to identify differences between single ponds or single years with regard to water quality and macrophyte community composition as measures of ecosystem integrity. In our study, the factor "pond", which describes differences between individual ponds, explained 56 \% and 63 \%, respectively, of the variance in water quality and macrophyte composition. In contrast, the factor "year" that refers to changes between individual years, contributed less to understand the observed variability in water quality and macrophyte composition (10 \% and 7 \% respectively, of the variance explained). The low explanation of variance for "year" and the low year-to-year correlation for the single water quality parameter or macrophyte coverage values, respectively, indicated high but non-consistent temporal variability affecting individual pond patterns. In general, the results largely supported the ability of the widely applied sampling strategy with about one sampling date per year to capture differences in water quality and macrophyte community composition between ponds. Hence, future research can be rest upon sampling designs that give more weight to the number of ponds than the number of years in dependence on the research question and the available resources. Nonetheless, pond research would miss a substantial amount of information (7 to 10 \% of the variance explained), when the sampling would generally be restricted to one year. Moreover, we expect that the importance of multiple-year sampling will likely increase in periods and regions of higher hydrological variability compared to the average hydrological conditions encountered in the studied period.}, language = {en} } @article{MayerUllmannSundeetal.2018, author = {Mayer, Martin and Ullmann, Wiebke and Sunde, Peter and Fischer, Christina and Blaum, Niels}, title = {Habitat selection by the European hare in arable landscapes}, series = {Ecology and Evolution}, volume = {8}, journal = {Ecology and Evolution}, number = {23}, publisher = {Wiley}, address = {Hoboken}, issn = {2045-7758}, doi = {10.1002/ece3.4613}, pages = {11619 -- 11633}, year = {2018}, abstract = {Agricultural land-use practices have intensified over the last decades, leading to population declines of various farmland species, including the European hare (Lepus europaeus). In many European countries, arable fields dominate agricultural landscapes. Compared to pastures, arable land is highly variable, resulting in a large spatial variation of food and cover for wildlife over the course of the year, which potentially affects habitat selection by hares. Here, we investigated within-home-range habitat selection by hares in arable areas in Denmark and Germany to identify habitat requirements for their conservation. We hypothesized that hare habitat selection would depend on local habitat structure, that is, vegetation height, but also on agricultural field size, vegetation type, and proximity to field edges. Active hares generally selected for short vegetation (1-25 cm) and avoided higher vegetation and bare ground, especially when fields were comparatively larger. Vegetation >50 cm potentially restricts hares from entering parts of their home range and does not provide good forage, the latter also being the case on bare ground. The vegetation type was important for habitat selection by inactive hares, with fabaceae, fallow, and maize being selected for, potentially providing both cover and forage. Our results indicate that patches of shorter vegetation could improve the forage quality and habitat accessibility for hares, especially in areas with large monocultures. Thus, policymakers should aim to increase areas with short vegetation throughout the year. Further, permanent set-asides, like fallow and wildflower areas, would provide year-round cover for inactive hares. Finally, the reduction in field sizes would increase the density of field margins, and farming different crop types within small areas could improve the habitat for hares and other farmland species.}, language = {en} } @article{SeifertWeithoffVos2015, author = {Seifert, Linda I. and Weithoff, Guntram and Vos, Matthijs}, title = {Extreme heat changes post-heat wave community reassembly}, series = {Ecology and evolution}, volume = {5}, journal = {Ecology and evolution}, number = {11}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {2045-7758}, doi = {10.1002/ece3.1490}, pages = {2140 -- 2148}, year = {2015}, abstract = {Climate forecasts project further increases in extremely high-temperature events. These present threats to biodiversity, as they promote population declines and local species extinctions. This implies that ecological communities will need to rely more strongly on recovery processes, such as recolonization from a meta-community context. It is poorly understood how differences in extreme event intensity change the outcome of subsequent community reassembly and if such extremes modify the biotic environment in ways that would prevent the successful re-establishment of lost species. We studied replicated aquatic communities consisting of algae and herbivorous rotifers in a design that involved a control and two different heat wave intensity treatments (29 degrees C and 39 degrees C). Animal species that suffered heat-induced extinction were subsequently re-introduced at the same time and density, in each of the two treatments. The 39 degrees C treatment led to community closure in all replicates, meaning that a previously successful herbivore species could not re-establish itself in the postheat wave community. In contrast, such closure never occurred after a 29 degrees C event. Heat wave intensity determined the number of herbivore extinctions and strongly affected algal relative abundances. Re-introduced herbivore species were thus confronted with significantly different food environments. This ecological legacy generated by heat wave intensity led to differences in the failure or success of herbivore species re-introductions. Reassembly was significantly more variable, and hence less predictable, after an extreme heat wave, and was more canalized after a moderate one. Our results pertain to relatively simple communities, but they suggest that ecological legacies introduced by extremely high-temperature events may change subsequent ecological recovery and even prevent the successful re-establishment of lost species. Knowing the processes promoting and preventing ecological recovery is crucial to the success of species re-introduction programs and to our ability to restore ecosystems damaged by environmental extremes.}, language = {en} } @article{SchedinaPfautschHartmannetal.2014, author = {Schedina, Ina-Maria and Pfautsch, Simone and Hartmann, Stefanie and Dolgener, N. and Polgar, Anika and Bianco, Pier Giorgio and Tiedemann, Ralph and Ketmaier, Valerio}, title = {Isolation and characterization of eight microsatellite loci in the brook lamprey Lampetra planeri (Petromyzontiformes) using 454 sequence data}, series = {Journal of fish biology}, volume = {85}, journal = {Journal of fish biology}, number = {3}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0022-1112}, doi = {10.1111/jfb.12470}, pages = {960 -- 964}, year = {2014}, abstract = {Eight polymorphic microsatellite loci were developed for the brook lamprey Lampetra planeri through 454 sequencing and their usefulness was tested in 45 individuals of both L. planeri and the river lamprey Lampetra fluviatilis. The number of alleles per loci ranged between two and five; the Italian and Irish populations had a mean expected heterozygosity of 0.388 and 0.424 and a mean observed heterozygosity of 0.418 and 0.411, respectively. (C) 2014 The Fisheries Society of the British Isles}, language = {en} }