@article{KummerowKindOnckenetal.2004, author = {Kummerow, J. and Kind, Rainer and Oncken, Onno and Giese, Peter and Ryberg, Trond and Wylegalla, Kurt and Scherbaum, Frank}, title = {A natural and controlled source seismic profile through the Eastern Alps : TRANSALP}, year = {2004}, abstract = {The combined passive and active seismic TRANSALP experiment produced an unprecedented high-resolution crustal image of the Eastern Alps between Munich and Venice. The European and Adriatic Mohos (EM and AM, respectively) are clearly imaged with different seismic techniques: near-vertical incidence reflections and receiver functions (RFs). The European Moho dips gently southward from 35 km beneath the northern foreland to a maximum depth of 55 km beneath the central part of the Eastern Alps, whereas the Adriatic Moho is imaged primarily by receiver functions at a relatively constant depth of about 40 km. In both data sets, we have also detected first-order Alpine shear zones, such as the Helvetic detachment, Inntal fault and SubTauern ramp in the north. Apart from the Valsugana thrust, receiver functions in the southern part of the Eastern Alps have also observed a north dipping interface, which may penetrate the entire Adriatic crust [Adriatic Crust Interface (ACI)]. Deep crustal seismicity may be related to the ACI. We interpret the ACI as the currently active retroshear zone in the doubly vergent Alpine collisional belt. (C) 2004 Elsevier B.V. All rights reserved}, language = {en} } @article{KuehnScherbaum2016, author = {Kuehn, Nicolas M. and Scherbaum, Frank}, title = {A partially non-ergodic ground-motion prediction equation for Europe and the Middle East}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {14}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-016-9911-x}, pages = {2629 -- 2642}, year = {2016}, abstract = {A partially non-ergodic ground-motion prediction equation is estimated for Europe and the Middle East. Therefore, a hierarchical model is presented that accounts for regional differences. For this purpose, the scaling of ground-motion intensity measures is assumed to be similar, but not identical in different regions. This is achieved by assuming a hierarchical model, where some coefficients are treated as random variables which are sampled from an underlying global distribution. The coefficients are estimated by Bayesian inference. This allows one to estimate the epistemic uncertainty in the coefficients, and consequently in model predictions, in a rigorous way. The model is estimated based on peak ground acceleration data from nine different European/Middle Eastern regions. There are large differences in the amount of earthquakes and records in the different regions. However, due to the hierarchical nature of the model, regions with only few data points borrow strength from other regions with more data. This makes it possible to estimate a separate set of coefficients for all regions. Different regionalized models are compared, for which different coefficients are assumed to be regionally dependent. Results show that regionalizing the coefficients for magnitude and distance scaling leads to better performance of the models. The models for all regions are physically sound, even if only very few earthquakes comprise one region.}, language = {en} } @article{BommerCoppersmithCoppersmithetal.2015, author = {Bommer, Julian J. and Coppersmith, Kevin J. and Coppersmith, Ryan T. and Hanson, Kathryn L. and Mangongolo, Azangi and Neveling, Johann and Rathje, Ellen M. and Rodriguez-Marek, Adrian and Scherbaum, Frank and Shelembe, Refilwe and Stafford, Peter J. and Strasser, Fleur O.}, title = {A SSHAC Level 3 Probabilistic Seismic Hazard Analysis for a New-Build Nuclear Site in South Africa}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {31}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, number = {2}, publisher = {Earthquake Engineering Research Institute}, address = {Oakland}, issn = {8755-2930}, doi = {10.1193/060913EQS145M}, pages = {661 -- 698}, year = {2015}, abstract = {A probabilistic seismic hazard analysis has been conducted for a potential nuclear power plant site on the coast of South Africa, a country of low-to-moderate seismicity. The hazard study was conducted as a SSHAC Level 3 process, the first application of this approach outside North America. Extensive geological investigations identified five fault sources with a non-zero probability of being seismogenic. Five area sources were defined for distributed seismicity, the least active being the host zone for which the low recurrence rates for earthquakes were substantiated through investigations of historical seismicity. Empirical ground-motion prediction equations were adjusted to a horizon within the bedrock at the site using kappa values inferred from weak-motion analyses. These adjusted models were then scaled to create new equations capturing the range of epistemic uncertainty in this region with no strong motion recordings. Surface motions were obtained by convolving the bedrock motions with site amplification functions calculated using measured shear-wave velocity profiles.}, language = {en} } @article{MolkenthinScherbaumGriewanketal.2014, author = {Molkenthin, Christian and Scherbaum, Frank and Griewank, Andreas and Kuehn, Nicolas and Stafford, Peter}, title = {A Study of the sensitivity of response spectral amplitudes on seismological parameters using algorithmic differentiation}, series = {Bulletin of the Seismological Society of America}, volume = {104}, journal = {Bulletin of the Seismological Society of America}, number = {5}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120140022}, pages = {2240 -- 2252}, year = {2014}, abstract = {Response spectra are of fundamental importance in earthquake engineering and represent a standard measure in seismic design for the assessment of structural performance. However, unlike Fourier spectral amplitudes, the relationship of response spectral amplitudes to seismological source, path, and site characteristics is not immediately obvious and might even be considered counterintuitive for high oscillator frequencies. The understanding of this relationship is nevertheless important for seismic-hazard analysis. The purpose of the present study is to comprehensively characterize the variation of response spectral amplitudes due to perturbations of the causative seismological parameters. This is done by calculating the absolute parameter sensitivities (sensitivity coefficients) defined as the partial derivatives of the model output with respect to its input parameters. To derive sensitivities, we apply algorithmic differentiation (AD). This powerful approach is extensively used for sensitivity analysis of complex models in meteorology or aerodynamics. To the best of our knowledge, AD has not been explored yet in the seismic-hazard context. Within the present study, AD was successfully implemented for a proven and extensively applied simulation program for response spectra (Stochastic Method SIMulation [SMSIM]) using the TAPENADE AD tool. We assess the effects and importance of input parameter perturbations on the shape of response spectra for different regional stochastic models in a quantitative way. Additionally, we perform sensitivity analysis regarding adjustment issues of groundmotion prediction equations.}, language = {en} } @article{ThomasIgelWeberetal.2000, author = {Thomas, Ch. and Igel, Heiner and Weber, Michael H. and Scherbaum, Frank}, title = {Acoustic simulation of P-wave propagation in a heterogeneous spherical earth : numerical method and application to precursor waves to PKPdf}, year = {2000}, language = {en} } @article{KohlerOhrnbergerScherbaumetal.2004, author = {Kohler, A. and Ohrnberger, Matthias and Scherbaum, Frank and Stange, S. and Kind, F.}, title = {Ambient vibration measurements in the Southern Rhine Graben close to Basle}, issn = {1593-5213}, year = {2004}, abstract = {This study presents results of ambient noise measurements from temporary single station and small-scale array deployments in the northeast of Basle. H/V spectral ratios were determined along various profiles crossing the eastern masterfault of the Rhine Rift Valley and the adjacent sedimentary rift fills. The fundamental H/V peak frequencies are decreasing along the profile towards the eastern direction being consistent with the dip of the tertiary sediments within the rift. Using existing empirical relationships between H/V frequency peaks and the depth of the dominant seismic contrast, derived on basis of the lambda/4-resonance hypothesis and a power law depth dependence of the S-wave velocity, we obtain thicknesses of the rift fill from about 155 m in the west to 280 in in the east. This is in agreement with previous studies. The array analysis of the ambient noise wavefield yielded a stable dispersion relation consistent with Rayleigh wave propagation velocities. We conclude that a significant amount of surface waves is contained in the observed wavefield. The computed ellipticity for fundamental mode Rayleigh waves for the velocity depth models used for the estimation of the sediment thicknesses is in agreement with the observed H/V spectra over a large frequency band}, language = {en} } @article{RungeScherbaumCurtisetal.2013, author = {Runge, Antonia K. and Scherbaum, Frank and Curtis, Andrew and Riggelsen, Carsten}, title = {An interactive tool for the elicitation of subjective probabilities in probabilistic seismic-hazard analysis}, series = {Bulletin of the Seismological Society of America}, volume = {103}, journal = {Bulletin of the Seismological Society of America}, number = {5}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120130026}, pages = {2862 -- 2874}, year = {2013}, abstract = {In probabilistic seismic-hazard analysis, epistemic uncertainties are commonly treated within a logic-tree framework in which the branch weights express the degree of belief of an expert in a set of models. For the calculation of the distribution of hazard curves, these branch weights represent subjective probabilities. A major challenge for experts is to provide logically consistent weight estimates (in the sense of Kolmogorovs axioms), to be aware of the multitude of heuristics, and to minimize the biases which affect human judgment under uncertainty. We introduce a platform-independent, interactive program enabling us to quantify, elicit, and transfer expert knowledge into a set of subjective probabilities by applying experimental design theory, following the approach of Curtis and Wood (2004). Instead of determining the set of probabilities for all models in a single step, the computer-driven elicitation process is performed as a sequence of evaluations of relative weights for small subsets of models. From these, the probabilities for the whole model set are determined as a solution of an optimization problem. The result of this process is a set of logically consistent probabilities together with a measure of confidence determined from the amount of conflicting information which is provided by the expert during the relative weighting process. We experiment with different scenarios simulating likely expert behaviors in the context of knowledge elicitation and show the impact this has on the results. The overall aim is to provide a smart elicitation technique, and our findings serve as a guide for practical applications.}, language = {en} } @article{RodriguezMarekRathjeBommeretal.2014, author = {Rodriguez-Marek, A. and Rathje, E. M. and Bommer, Julian J. and Scherbaum, Frank and Stafford, P. J.}, title = {Application of single-station sigma and site-response characterization in a probabilistic Seismic-Hazard analysis for new uclear site}, series = {Bulletin of the Seismological Society of America}, volume = {104}, journal = {Bulletin of the Seismological Society of America}, number = {4}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120130196}, pages = {1601 -- 1619}, year = {2014}, abstract = {Aleatory variability in ground-motion prediction, represented by the standard deviation (sigma) of a ground-motion prediction equation, exerts a very strong influence on the results of probabilistic seismic-hazard analysis (PSHA). This is especially so at the low annual exceedance frequencies considered for nuclear facilities; in these cases, even small reductions in sigma can have a marked effect on the hazard estimates. Proper separation and quantification of aleatory variability and epistemic uncertainty can lead to defensible reductions in sigma. One such approach is the single-station sigma concept, which removes that part of sigma corresponding to repeatable site-specific effects. However, the site-to-site component must then be constrained by site-specific measurements or else modeled as epistemic uncertainty and incorporated into the modeling of site effects. The practical application of the single-station sigma concept, including the characterization of the dynamic properties of the site and the incorporation of site-response effects into the hazard calculations, is illustrated for a PSHA conducted at a rock site under consideration for the potential construction of a nuclear power plant.}, language = {en} } @article{EwaldIgelHinzenetal.2006, author = {Ewald, Michael and Igel, Heiner and Hinzen, Klaus-G{\"u}nther and Scherbaum, Frank}, title = {Basin-related effects on ground motion for earthquake scenarios in the Lower Rhine Embayment}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2006.02909.x}, year = {2006}, abstract = {The deterministic calculation of earthquake scenarios using complete waveform modelling plays an increasingly important role in estimating shaking hazard in seismically active regions. Here we apply 3-D numerical modelling of seismic wave propagation to M 6+ earthquake scenarios in the area of the Lower Rhine Embayment, one of the seismically most active regions in central Europe. Using a 3-D basin model derived from geology, borehole information and seismic experiments, we aim at demonstrating the strong dependence of ground shaking on hypocentre location and basin structure. The simulations are carried out up to frequencies of ca. 1 Hz. As expected, the basin structure leads to strong lateral variations in peak ground motion, amplification and shaking duration. Depending on source-basin-receiver geometry, the effects correlate with basin depth and the slope of the basin flanks; yet, the basin also affects peak ground motion and estimated shaking hazard thereof outside the basin. Comparison with measured seismograms for one of the earthquakes shows that some of the main characteristics of the wave motion are reproduced. Cumulating the derived seismic intensities from the three modelled earthquake scenarios leads to a predominantly basin correlated intensity distribution for our study area}, language = {en} } @article{SchmelzbachScherbaumTronickeetal.2011, author = {Schmelzbach, C. and Scherbaum, Frank and Tronicke, Jens and Dietrich, P.}, title = {Bayesian frequency-domain blind deconvolution of ground-penetrating radar data}, series = {Journal of applied geophysics}, volume = {75}, journal = {Journal of applied geophysics}, number = {4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0926-9851}, doi = {10.1016/j.jappgeo.2011.08.010}, pages = {615 -- 630}, year = {2011}, abstract = {Enhancing the resolution and accuracy of surface ground-penetrating radar (GPR) reflection data by inverse filtering to recover a zero-phased band-limited reflectivity image requires a deconvolution technique that takes the mixed-phase character of the embedded wavelet into account. In contrast, standard stochastic deconvolution techniques assume that the wavelet is minimum phase and, hence, often meet with limited success when applied to GPR data. We present a new general-purpose blind deconvolution algorithm for mixed-phase wavelet estimation and deconvolution that (1) uses the parametrization of a mixed-phase wavelet as the convolution of the wavelet's minimum-phase equivalent with a dispersive all-pass filter, (2) includes prior information about the wavelet to be estimated in a Bayesian framework, and (3) relies on the assumption of a sparse reflectivity. Solving the normal equations using the data autocorrelation function provides an inverse filter that optimally removes the minimum-phase equivalent of the wavelet from the data, which leaves traces with a balanced amplitude spectrum but distorted phase. To compensate for the remaining phase errors, we invert in the frequency domain for an all-pass filter thereby taking advantage of the fact that the action of the all-pass filter is exclusively contained in its phase spectrum. A key element of our algorithm and a novelty in blind deconvolution is the inclusion of prior information that allows resolving ambiguities in polarity and timing that cannot be resolved using the sparseness measure alone. We employ a global inversion approach for non-linear optimization to find the all-pass filter phase values for each signal frequency. We tested the robustness and reliability of our algorithm on synthetic data with different wavelets, 1-D reflectivity models of different complexity, varying levels of added noise, and different types of prior information. When applied to realistic synthetic 2-D data and 2-D field data, we obtain images with increased temporal resolution compared to the results of standard processing.}, language = {en} } @article{VogelRiggelsenKorupetal.2014, author = {Vogel, Kristin and Riggelsen, Carsten and Korup, Oliver and Scherbaum, Frank}, title = {Bayesian network learning for natural hazard analyses}, series = {Natural hazards and earth system sciences}, volume = {14}, journal = {Natural hazards and earth system sciences}, number = {9}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1561-8633}, doi = {10.5194/nhess-14-2605-2014}, pages = {2605 -- 2626}, year = {2014}, abstract = {Modern natural hazards research requires dealing with several uncertainties that arise from limited process knowledge, measurement errors, censored and incomplete observations, and the intrinsic randomness of the governing processes. Nevertheless, deterministic analyses are still widely used in quantitative hazard assessments despite the pitfall of misestimating the hazard and any ensuing risks. In this paper we show that Bayesian networks offer a flexible framework for capturing and expressing a broad range of uncertainties encountered in natural hazard assessments. Although Bayesian networks are well studied in theory, their application to real-world data is far from straightforward, and requires specific tailoring and adaptation of existing algorithms. We offer suggestions as how to tackle frequently arising problems in this context and mainly concentrate on the handling of continuous variables, incomplete data sets, and the interaction of both. By way of three case studies from earthquake, flood, and landslide research, we demonstrate the method of data-driven Bayesian network learning, and showcase the flexibility, applicability, and benefits of this approach. Our results offer fresh and partly counterintuitive insights into well-studied multivariate problems of earthquake-induced ground motion prediction, accurate flood damage quantification, and spatially explicit landslide prediction at the regional scale. In particular, we highlight how Bayesian networks help to express information flow and independence assumptions between candidate predictors. Such knowledge is pivotal in providing scientists and decision makers with well-informed strategies for selecting adequate predictor variables for quantitative natural hazard assessments.}, language = {en} } @misc{HiemerRoesslerScherbaum2010, author = {Hiemer, Stefan and R{\"o}ßler, Dirk and Scherbaum, Frank}, title = {Catalog of Swarm Earthquakes in Vogtland /West Bohemia in 2008/09}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51710}, year = {2010}, abstract = {The document contains the catalog of earthquakes in Vogtland /West Bohemia within the period of 2008/10/19 -to- 2009/03/16. The events were recorded by a seismic mini-array operated by the Institute of Earthsciences, University of Postdam.}, language = {en} } @misc{HiemerRoesslerScherbaum2010, author = {Hiemer, Stefan and R{\"o}ßler, Dirk and Scherbaum, Frank}, title = {Catalog of Swarm Earthquakes in Vogtland /West Bohemia in 2008/09}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53837}, year = {2010}, abstract = {The document contains the catalog of earthquakes in Vogtland /West Bohemia within the period of 2008/10/19 -to- 2009/03/16. The events were recorded by a seismic mini-array operated by the Institute of Earthsciences, University of Postdam.}, language = {en} } @article{HolschneiderDialloKuleshetal.2005, author = {Holschneider, Matthias and Diallo, Mamadou Sanou and Kulesh, Michail and Ohrnberger, Matthias and Luck, E. and Scherbaum, Frank}, title = {Characterization of dispersive surface waves using continuous wavelet transforms}, issn = {0956-540X}, year = {2005}, abstract = {In this paper, we propose a method of surface waves characterization based on the deformation of the wavelet transform of the analysed signal. An estimate of the phase velocity (the group velocity) and the attenuation coefficient is carried out using a model-based approach to determine the propagation operator in the wavelet domain, which depends nonlinearly on a set of unknown parameters. These parameters explicitly define the phase velocity, the group velocity and the attenuation. Under the assumption that the difference between waveforms observed at a couple of stations is solely due to the dispersion characteristics and the intrinsic attenuation of the medium, we then seek to find the set of unknown parameters of this model. Finding the model parameters turns out to be that of an optimization problem, which is solved through the minimization of an appropriately defined cost function. We show that, unlike time-frequency methods that exploit only the square modulus of the transform, we can achieve a complete characterization of surface waves in a dispersive and attenuating medium. Using both synthetic examples and experimental data, we also show that it is in principle possible to separate different modes in both the time domain and the frequency domain}, language = {en} } @article{DialloKuleshHolschneideretal.2006, author = {Diallo, Mamadou Sanou and Kulesh, Michail and Holschneider, Matthias and Scherbaum, Frank and Adler, Frank}, title = {Characterization of polarization attributes of seismic waves using continuous wavelet transforms}, issn = {0016-8033}, doi = {10.1190/1.2194511}, year = {2006}, abstract = {Complex-trace analysis is the method of choice for analyzing polarized data. Because particle motion can be represented by instantaneous attributes that show distinct features for waves of different polarization characteristics, it can be used to separate and characterize these waves. Traditional methods of complex-trace analysis only give the instantaneous attributes as a function of time or frequency. However. for transient wave types or seismic events that overlap in time, an estimate of the polarization parameters requires analysis of the time-frequency dependence of these attributes. We propose a method to map instantaneous polarization attributes of seismic signals in the wavelet domain and explicitly relate these attributes with the wavelet-transform coefficients of the analyzed signal. We compare our method with traditional complex-trace analysis using numerical examples. An advantage of our method is its possibility of performing the complete wave-mode separation/ filtering process in the wavelet domain and its ability to provide the frequency dependence of ellipticity, which contains important information on the subsurface structure. Furthermore, using 2-C synthetic and real seismic shot gathers, we show how to use the method to separate different wave types and identify zones of interfering wave modes}, language = {en} } @article{DahmKuehnOhrnbergeretal.2010, author = {Dahm, Torsten and Kuehn, Daniela and Ohrnberger, Matthias and Kroeger, Jens and Wiederhold, Helga and Reuther, Claus-Dieter and Dehghani, Ali and Scherbaum, Frank}, title = {Combining geophysical data sets to study the dynamics of shallow evaporites in urban environments : application to Hamburg, Germany}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2010.04521.x}, year = {2010}, abstract = {Shallowly situated evaporites in built-up areas are of relevance for urban and cultural development and hydrological regulation. The hazard of sinkholes, subrosion depressions and gypsum karst is often difficult to evaluate and may quickly change with anthropogenic influence. The geophysical exploration of evaporites in metropolitan areas is often not feasible with active industrial techniques. We collect and combine different passive geophysical data as microgravity, ambient vibrations, deformation and hydrological information to study the roof morphology of shallow evaporites beneath Hamburg, Northern Germany. The application of a novel gravity inversion technique leads to a 3-D depth model of the salt diapir under study. We compare the gravity-based depth model to pseudo-depths from H/V measurements and depth estimates from small-scale seismological array data. While the general range and trend of the diapir roof is consistent, a few anomalous regions are identified where H/V pseudo-depths indicate shallower structures not observed in gravity or array data. These are interpreted by shallow residual caprock floaters and zones of increased porosity. The shallow salt structure clearly correlates with a relative subsidence in the order of 2 mm yr(-1). The combined interpretation of roof morphology, yearly subsidence rates, chemical analyses of groundwater and of hydraulic head in aquifers indicates that the salt diapir beneath Hamburg is subject to significant ongoing dissolution that may possibly affect subrosion depressions, sinkhole distribution and land usage. The combined analysis of passive geophysical data may be exemplary for the study of shallow evaporites beneath other urban areas.}, language = {en} } @article{DouglasAkkarAmerietal.2014, author = {Douglas, John and Akkar, Sinan and Ameri, Gabriele and Bard, Pierre-Yves and Bindi, Dino and Bommer, Julian J. and Bora, Sanjay Singh and Cotton, Fabrice Pierre and Derras, Boumediene and Hermkes, Marcel and Kuehn, Nicolas Martin and Luzi, Lucia and Massa, Marco and Pacor, Francesca and Riggelsen, Carsten and Sandikkaya, M. Abdullah and Scherbaum, Frank and Stafford, Peter J. and Traversa, Paola}, title = {Comparisons among the five ground-motion models developed using RESORCE for the prediction of response spectral accelerations due to earthquakes in Europe and the Middle East}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {12}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {1}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-013-9522-8}, pages = {341 -- 358}, year = {2014}, abstract = {This article presents comparisons among the five ground-motion models described in other articles within this special issue, in terms of data selection criteria, characteristics of the models and predicted peak ground and response spectral accelerations. Comparisons are also made with predictions from the Next Generation Attenuation (NGA) models to which the models presented here have similarities (e.g. a common master database has been used) but also differences (e.g. some models in this issue are nonparametric). As a result of the differing data selection criteria and derivation techniques the predicted median ground motions show considerable differences (up to a factor of two for certain scenarios), particularly for magnitudes and distances close to or beyond the range of the available observations. The predicted influence of style-of-faulting shows much variation among models whereas site amplification factors are more similar, with peak amplification at around 1s. These differences are greater than those among predictions from the NGA models. The models for aleatory variability (sigma), however, are similar and suggest that ground-motion variability from this region is slightly higher than that predicted by the NGA models, based primarily on data from California and Taiwan.}, language = {en} } @article{ScherbaumBommerBungumetal.2005, author = {Scherbaum, Frank and Bommer, Julian J. and Bungum, Hilmar and Cotton, Fabrice Pierre and Abrahamson, Norman A.}, title = {Composite ground-motion models and logic trees: Methodology, sensitivities, and uncertainties}, issn = {0037-1106}, year = {2005}, abstract = {Logic trees have become a popular tool in seismic hazard studies. Commonly, the models corresponding to the end branches of the complete logic tree in a probabalistic seismic hazard analysis (PSHA) are treated separately until the final calculation of the set of hazard curves. This comes at the price that information regarding sensitivities and uncertainties in the ground-motion sections of the logic tree are only obtainable after disaggregation. Furthermore, from this end-branch model perspective even the designers of the logic tree cannot directly tell what ground-motion scenarios most likely would result from their logic trees for a given earthquake at a particular distance, nor how uncertain these scenarios might be or how they would be affected by the choices of the hazard analyst. On the other hand, all this information is already implicitly present in the logic tree. Therefore, with the ground-motion perspective that we propose in the present article, we treat the ground-motion sections of a complete logic tree for seismic hazard as a single composite model representing the complete state-of-knowledge-and-belief of a particular analyst on ground motion in a particular target region. We implement this view by resampling the ground-motion models represented in the ground-motion sections of the logic tree by Monte Carlo simulation (separately for the median values and the sigma values) and then recombining the sets of simulated values in proportion to their logic-tree branch weights. The quantiles of this resampled composite model provide the hazard analyst and the decision maker with a simple, clear, and quantitative representation of the overall physical meaning of the ground-motion section of a logic tree and the accompanying epistemic uncertainty. Quantiles of the composite model also provide an easy way to analyze the sensitivities and uncertainties related to a given logic-tree model. We illustrate this for a composite ground- motion model for central Europe. Further potential fields of applications are seen wherever individual best estimates of ground motion have to be derived from a set of candidate models, for example, for hazard rnaps, sensitivity studies, or for modeling scenario earthquakes}, language = {en} } @article{RietbrockScherbaum1998, author = {Rietbrock, Andreas and Scherbaum, Frank}, title = {Crustal scattering at the KTB from a combined microearthquake and receiver analysis}, year = {1998}, language = {en} } @article{MolkenthinScherbaumGriewanketal.2017, author = {Molkenthin, Christian and Scherbaum, Frank and Griewank, Andreas and Leovey, Hernan and Kucherenko, Sergei and Cotton, Fabrice Pierre}, title = {Derivative-Based Global Sensitivity Analysis: Upper Bounding of Sensitivities in Seismic-Hazard Assessment Using Automatic Differentiation}, series = {Bulletin of the Seismological Society of America}, volume = {107}, journal = {Bulletin of the Seismological Society of America}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120160185}, pages = {984 -- 1004}, year = {2017}, abstract = {Seismic-hazard assessment is of great importance within the field of engineering seismology. Nowadays, it is common practice to define future seismic demands using probabilistic seismic-hazard analysis (PSHA). Often it is neither obvious nor transparent how PSHA responds to changes in its inputs. In addition, PSHA relies on many uncertain inputs. Sensitivity analysis (SA) is concerned with the assessment and quantification of how changes in the model inputs affect the model response and how input uncertainties influence the distribution of the model response. Sensitivity studies are challenging primarily for computational reasons; hence, the development of efficient methods is of major importance. Powerful local (deterministic) methods widely used in other fields can make SA feasible, even for complex models with a large number of inputs; for example, automatic/algorithmic differentiation (AD)-based adjoint methods. Recently developed derivative-based global sensitivity measures can combine the advantages of such local SA methods with efficient sampling strategies facilitating quantitative global sensitivity analysis (GSA) for complex models. In our study, we propose and implement exactly this combination. It allows an upper bounding of the sensitivities involved in PSHA globally and, therefore, an identification of the noninfluential and the most important uncertain inputs. To the best of our knowledge, it is the first time that derivative-based GSA measures are combined with AD in practice. In addition, we show that first-order uncertainty propagation using the delta method can give satisfactory approximations of global sensitivity measures and allow a rough characterization of the model output distribution in the case of PSHA. An illustrative example is shown for the suggested derivative-based GSA of a PSHA that uses stochastic ground-motion simulations.}, language = {en} } @article{KuehnScherbaumRiggelsen2009, author = {K{\"u}hn, Nicolas M. and Scherbaum, Frank and Riggelsen, Carsten}, title = {Deriving empirical ground-motion models : balancing data constraints and physical assumptions to optimize prediction capability}, issn = {0037-1106}, doi = {10.1785/0120080136}, year = {2009}, abstract = {Empirical ground-motion models used in seismic hazard analysis are commonly derived by regression of observed ground motions against a chosen set of predictor variables. Commonly, the model building process is based on residual analysis and/or expert knowledge and/or opinion, while the quality of the model is assessed by the goodness-of-fit to the data. Such an approach, however, bears no immediate relation to the predictive power of the model and with increasing complexity of the models is increasingly susceptible to the danger of overfitting. Here, a different, primarily data-driven method for the development of ground-motion models is proposed that makes use of the notion of generalization error to counteract the problem of overfitting. Generalization error directly estimates the average prediction error on data not used for the model generation and, thus, is a good criterion to assess the predictive capabilities of a model. The approach taken here makes only few a priori assumptions. At first, peak ground acceleration and response spectrum values are modeled by flexible, nonphysical functions (polynomials) of the predictor variables. The inclusion of a particular predictor and the order of the polynomials are based on minimizing generalization error. The approach is illustrated for the next generation of ground-motion attenuation dataset. The resulting model is rather complex, comprising 48 parameters, but has considerably lower generalization error than functional forms commonly used in ground-motion models. The model parameters have no physical meaning, but a visual interpretation is possible and can reveal relevant characteristics of the data, for example, the Moho bounce in the distance scaling. In a second step, the regression model is approximated by an equivalent stochastic model, making it physically interpretable. The resulting resolvable stochastic model parameters are comparable to published models for western North America. In general, for large datasets generalization error minimization provides a viable method for the development of empirical ground-motion models.}, language = {en} } @article{OhrnbergerWassermannScherbaumetal.1999, author = {Ohrnberger, Matthias and Wassermann, J{\"u}rgen and Scherbaum, Frank and Budi, E. N. and Gossler, J.}, title = {Detection and classification of seismic signals of volcanic origin at Mt. Merapi (Indonesia)}, year = {1999}, language = {en} } @article{HiemerScherbaumRoessleretal.2011, author = {Hiemer, Stefan and Scherbaum, Frank and R{\"o}ßler, Dirk and K{\"u}hn, Nicolas}, title = {Determination of tau(0) and Rock Site kappa from Records of the 2008/2009 Earthquake Swarm in Western Bohemia}, series = {Seismological research letters}, volume = {82}, journal = {Seismological research letters}, number = {3}, publisher = {Seismological Society of America}, address = {El Cerrito}, issn = {0895-0695}, doi = {10.1785/gssrl.82.3.387}, pages = {387 -- 393}, year = {2011}, language = {en} } @article{BoraScherbaumKuehnetal.2015, author = {Bora, Sanjay Singh and Scherbaum, Frank and K{\"u}hn, Nicolas and Stafford, Peter and Edwards, Benjamin}, title = {Development of a Response Spectral Ground-Motion Prediction Equation (GMPE) for Seismic-Hazard Analysis from Empirical Fourier Spectral and Duration Models}, series = {Bulletin of the Seismological Society of America}, volume = {105}, journal = {Bulletin of the Seismological Society of America}, number = {4}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120140297}, pages = {2192 -- 2218}, year = {2015}, abstract = {Empirical ground-motion prediction equations (GMPEs) require adjustment to make them appropriate for site-specific scenarios. However, the process of making such adjustments remains a challenge. This article presents a holistic framework for the development of a response spectral GMPE that is easily adjustable to different seismological conditions and does not suffer from the practical problems associated with adjustments in the response spectral domain. The approach for developing a response spectral GMPE is unique, because it combines the predictions of empirical models for the two model components that characterize the spectral and temporal behavior of the ground motion. Essentially, as described in its initial form by Bora et al. (2014), the approach consists of an empirical model for the Fourier amplitude spectrum (FAS) and a model for the ground-motion duration. These two components are combined within the random vibration theory framework to obtain predictions of response spectral ordinates. In addition, FAS corresponding to individual acceleration records are extrapolated beyond the useable frequencies using the stochastic FAS model, obtained by inversion as described in Edwards and Fah (2013a). To that end, a (oscillator) frequency-dependent duration model, consistent with the empirical FAS model, is also derived. This makes it possible to generate a response spectral model that is easily adjustable to different sets of seismological parameters, such as the stress parameter Delta sigma, quality factor Q, and kappa kappa(0). The dataset used in Bora et al. (2014), a subset of the RESORCE-2012 database, is considered for the present analysis. Based upon the range of the predictor variables in the selected dataset, the present response spectral GMPE should be considered applicable over the magnitude range of 4 <= M-w <= 7.6 at distances <= 200 km.}, language = {en} } @article{ScherbaumSchmidtke2001, author = {Scherbaum, Frank and Schmidtke, E.}, title = {Digital seismology tutor}, year = {2001}, language = {en} } @article{ScherbaumKruegerWeber1997, author = {Scherbaum, Frank and Kr{\"u}ger, Frank and Weber, Michael H.}, title = {Double beam imaging : mapping lower mantle heterogeneities using combinations of source and receiver arrays}, year = {1997}, language = {en} } @article{HainzlScherbaumBeauval2006, author = {Hainzl, Sebastian and Scherbaum, Frank and Beauval, C{\´e}line}, title = {Estimating background activity based on interevent-time distribution}, issn = {0037-1106}, doi = {10.1785/0120050053}, year = {2006}, abstract = {The statistics of time delays between successive earthquakes has recently been claimed to be universal and to show the existence of clustering beyond the duration of aftershock bursts. We demonstrate that these claims are unjustified. Stochastic simulations with Poissonian background activity and triggered Omori-type aftershock sequences are shown to reproduce the interevent-time distributions observed on different spatial and magnitude scales in California. Thus the empirical distribution can be explained without any additional long-term clustering. Furthermore, we find that the shape of the interevent-time distribution, which can be approximated by the gamma distribution, is determined by the percentage of main-shocks in the catalog. This percentage can be calculated by the mean and variance of the interevent times and varies between 5\% and 90\% for different regions in California. Our investigation of stochastic simulations indicates that the interevent-time distribution provides a nonparametric reconstruction of the mainshock magnitude-frequency distribution that is superior to standard declustering algorithm}, language = {en} } @article{MussonToroCoppersmithetal.2005, author = {Musson, R. M. W. and Toro, G. R. and Coppersmith, Kevin J. and Bommer, Julian J. and Deichmann, N. and Bungum, Hilmar and Cotton, Fabrice Pierre and Scherbaum, Frank and Slejko, Dario and Abrahamson, Norman A.}, title = {Evaluating hazard results for Switzerland and how not to do it : a discussion of "Problems in the application of the SSHAC probability method for assessing earthquake hazards at Swiss nuclear power plants" by J-U Klugel}, year = {2005}, abstract = {The PEGASOS project was a major international seismic hazard study, one of the largest ever conducted anywhere in the world, to assess seismic hazard at four nuclear power plant sites in Switzerland. Before the report of this project has become publicly available, a paper attacking both methodology and results has appeared. Since the general scientific readership may have difficulty in assessing this attack in the absence of the report being attacked, we supply a response in the present paper. The bulk of the attack, besides some misconceived arguments about the role of uncertainties in seismic hazard analysis, is carried by some exercises that purport to be validation exercises. In practice, they are no such thing; they are merely independent sets of hazard calculations based on varying assumptions and procedures, often rather questionable, which come up with various different answers which have no particular significance. (C) 2005 Elsevier B.V. All rights reserved}, language = {en} } @article{DeichmannAnsorgeScherbaumetal.1999, author = {Deichmann, N. and Ansorge, J{\"o}rg and Scherbaum, Frank and Aschwanden, Andy and Bernadi, F. and Gudmundsson, Gudmundur Hilmar}, title = {Evidence for deep icequakes in an alpine glacier}, year = {1999}, language = {en} } @article{EsfahaniVogelCottonetal.2021, author = {Esfahani, Reza Dokht Dolatabadi and Vogel, Kristin and Cotton, Fabrice Pierre and Ohrnberger, Matthias and Scherbaum, Frank and Kriegerowski, Marius}, title = {Exploring the dimensionality of ground-motion data by applying autoencoder techniques}, series = {Bulletin of the Seismological Society of America : BSSA}, volume = {111}, journal = {Bulletin of the Seismological Society of America : BSSA}, number = {3}, publisher = {Seismological Society of America}, address = {El Cerito, Calif.}, issn = {0037-1106}, doi = {10.1785/0120200285}, pages = {1563 -- 1576}, year = {2021}, abstract = {In this article, we address the question of how observed ground-motion data can most effectively be modeled for engineering seismological purposes. Toward this goal, we use a data-driven method, based on a deep-learning autoencoder with a variable number of nodes in the bottleneck layer, to determine how many parameters are needed to reconstruct synthetic and observed ground-motion data in terms of their median values and scatter. The reconstruction error as a function of the number of nodes in the bottleneck is used as an indicator of the underlying dimensionality of ground-motion data, that is, the minimum number of predictor variables needed in a ground-motion model. Two synthetic and one observed datasets are studied to prove the performance of the proposed method. We find that mapping ground-motion data to a 2D manifold primarily captures magnitude and distance information and is suited for an approximate data reconstruction. The data reconstruction improves with an increasing number of bottleneck nodes of up to three and four, but it saturates if more nodes are added to the bottleneck.}, language = {en} } @article{ScherbaumBouin1997, author = {Scherbaum, Frank and Bouin, M. P.}, title = {FIR filter effects and nucleation phases}, year = {1997}, language = {en} } @article{SuryantoIgelWassermannetal.2006, author = {Suryanto, Wiwit and Igel, Heiner and Wassermann, Joachim and Cochard, Alain and Schuberth, B. S. A. and Vollmer, Daniel and Scherbaum, Frank and Schreiber, U. and Velikoseltsev, A.}, title = {First comparison of array-derived rotational ground motions with direct ring laser measurements}, series = {Bulletin of the Seismological Society of America}, volume = {96}, journal = {Bulletin of the Seismological Society of America}, number = {6}, publisher = {GeoScienceWorld}, address = {Alexandria, Va.}, issn = {0037-1106}, doi = {10.1785/0120060004}, pages = {2059 -- 2071}, year = {2006}, abstract = {Recently, ring laser technology has provided the first consistent observations of rotational ground motions around a vertical axis induced by earthquakes. "Consistent," in this context, implies that the observed waveforms and amplitudes are compatible with collocated recordings of translational ground motions. In particular, transverse accelerations should be in phase with rotation rate and their ratio proportional to local horizontal phase velocity assuming plane-wave propagation. The ring laser installed at the Fundamental station Wettzell in the Bavarian Forest, Southeast Germany, is recording the rotation rate around a vertical axis, theoretically a linear combination of the space derivatives of the horizontal components of motion. This suggests that, in principle, rotation can be derived from seismic-array experiments by "finite differencing." This has been attempted previously in several studies; however, the accuracy of these observations could never be tested in the absence of direct measurements. We installed a double cross-shaped array of nine stations from December 2003 to March 2004 around the ring laser instrument and observed several large earthquakes on both the ring laser and the seismic array. Here we present for the first time a comparison of array-derived rotations with direct measurements of rotations for ground motions induced by the M 6.3 Al Hoceima, Morocco, earthquake of 24 February 2004. With complete 3D synthetic seismograms calculated for this event we show that even low levels of noise may considerably influence the accuracy of the array-derived rotations when the minimum number of required stations (three) is used. Nevertheless, when using all nine stations, the overall fit between direct and array-derived measurements is surprisingly good (maximum correlation coefficient of 0.94).}, language = {en} } @article{BoraScherbaumKuehnetal.2014, author = {Bora, Sanjay Singh and Scherbaum, Frank and K{\"u}hn, Nicolas and Stafford, Peter}, title = {Fourier spectral- and duration models for the generation of response spectra adjustable to different source-, propagation-, and site conditions}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {12}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {1}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-013-9482-z}, pages = {467 -- 493}, year = {2014}, abstract = {One of the major challenges related with the current practice in seismic hazard studies is the adjustment of empirical ground motion prediction equations (GMPEs) to different seismological environments. We believe that the key to accommodating differences in regional seismological attributes of a ground motion model lies in the Fourier spectrum. In the present study, we attempt to explore a new approach for the development of response spectral GMPEs, which is fully consistent with linear system theory when it comes to adjustment issues. This approach consists of developing empirical prediction equations for Fourier spectra and for a particular duration estimate of ground motion which is tuned to optimize the fit between response spectra obtained through the random vibration theory framework and the classical way. The presented analysis for the development of GMPEs is performed on the recently compiled reference database for seismic ground motion in Europe (RESORCE-2012). Although, the main motivation for the presented approach is the adjustability and the use of the corresponding model to generate data driven host-to-target conversions, even as a standalone response spectral model it compares reasonably well with the GMPEs of Ambraseys et al. (Bull Earthq Eng 3:1-53, 2005), Akkar and Bommer (Seismol Res Lett 81(2):195-206, 2010) and Akkar and Cagnan (Bull Seismol Soc Am 100(6):2978-2995, 2010).}, language = {en} } @article{DouglasBungumScherbaum2006, author = {Douglas, John and Bungum, Hilmar and Scherbaum, Frank}, title = {Ground-motion prediction equations for Southern Spain and Southern Norway obtained using the composite model perspective}, issn = {1363-2469}, doi = {10.1080/1363246060935058}, year = {2006}, abstract = {In this paper, two sets of earthquake ground-motion relations to estimate peak ground and response spectral acceleration are developed for sites in southern Spain and in southern Norway using a recently published composite approach. For this purpose seven empirical ground-motion relations developed from recorded strong-motion data from different parts of the world were employed. The different relations were first adjusted based on a number of transformations to convert the differing choices of independent parameters to a single one. After these transformations, which include the scatter introduced, were performed, the equations were modified to account for differences between the host and the target regions using the stochastic method to compute the host-to-target conversion factors. Finally functions were fitted to the derived ground-motion estimates to obtain sets of seven individual equations for use in probabilistic seismic hazard assessment for southern Spain and southern Norway. The relations are compared with local ones published for the two regions. The composite methodology calls for the setting up of independent logic trees for the median values and for the sigma values, in order to properly separate epistemic and aleatory uncertainties after the corrections and the conversions}, language = {en} } @article{KuehnScherbaum2015, author = {K{\"u}hn, Nico M. and Scherbaum, Frank}, title = {Ground-motion prediction model building: a multilevel approach}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {13}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {9}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-015-9732-3}, pages = {2481 -- 2491}, year = {2015}, abstract = {A Bayesian ground-motion model is presented that directly estimates the coefficients of the model and the correlation between different ground-motion parameters of interest. The model is developed as a multi-level model with levels for earthquake, station and record terms. This separation allows to estimate residuals for each level and thus the estimation of the associated aleatory variability. In particular, the usually estimated within-event variability is split into a between-station and between-record variability. In addition, the covariance structure between different ground-motion parameters of interest is estimated for each level, i.e. directly the between-event, between-station and between-record correlation coefficients are available. All parameters of the model are estimated via Bayesian inference, which allows to assess their epistemic uncertainty in a principled way. The model is developed using a recently compiled European strong-motion database. The target variables are peak ground velocity, peak ground acceleration and spectral acceleration at eight oscillator periods. The model performs well with respect to its residuals, and is similar to other ground-motion models using the same underlying database. The correlation coefficients are similar to those estimated for other parts of the world, with nearby periods having a high correlation. The between-station, between-event and between-record correlations follow generally a similar trend.}, language = {en} } @article{SchroeterKreibichVogeletal.2014, author = {Schroeter, Kai and Kreibich, Heidi and Vogel, Kristin and Riggelsen, Carsten and Scherbaum, Frank and Merz, Bruno}, title = {How useful are complex flood damage models?}, series = {Water resources research}, volume = {50}, journal = {Water resources research}, number = {4}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0043-1397}, doi = {10.1002/2013WR014396}, pages = {3378 -- 3395}, year = {2014}, abstract = {We investigate the usefulness of complex flood damage models for predicting relative damage to residential buildings in a spatial and temporal transfer context. We apply eight different flood damage models to predict relative building damage for five historic flood events in two different regions of Germany. Model complexity is measured in terms of the number of explanatory variables which varies from 1 variable up to 10 variables which are singled out from 28 candidate variables. Model validation is based on empirical damage data, whereas observation uncertainty is taken into consideration. The comparison of model predictive performance shows that additional explanatory variables besides the water depth improve the predictive capability in a spatial and temporal transfer context, i.e., when the models are transferred to different regions and different flood events. Concerning the trade-off between predictive capability and reliability the model structure seem more important than the number of explanatory variables. Among the models considered, the reliability of Bayesian network-based predictions in space-time transfer is larger than for the remaining models, and the uncertainties associated with damage predictions are reflected more completely.}, language = {en} } @article{DelavaudScherbaumKuehnetal.2009, author = {Delavaud, Elise and Scherbaum, Frank and Kuehn, Nicolas and Riggelsen, Carsten}, title = {Information-theoretic selection of ground-motion prediction equations for seismic hazard analysis : an applicability study using Californian data}, issn = {0037-1106}, doi = {10.1785/0120090055}, year = {2009}, abstract = {Considering the increasing number and complexity of ground-motion prediction equations available for seismic hazard assessment, there is a definite need for an efficient, quantitative, and robust method to select and rank these models for a particular region of interest. In a recent article, Scherbaum et al. (2009) have suggested an information- theoretic approach for this purpose that overcomes several shortcomings of earlier attempts at using data-driven ground- motion prediction equation selection procedures. The results of their theoretical study provides evidence that in addition to observed response spectra, macroseismic intensity data might be useful for model selection and ranking. We present here an applicability study for this approach using response spectra and macroseismic intensities from eight Californian earthquakes. A total of 17 ground-motion prediction equations, from different regions, for response spectra, combined with the equation of Atkinson and Kaka (2007) for macroseismic intensities are tested for their relative performance. The resulting data-driven rankings show that the models that best estimate ground motion in California are, as one would expect, Californian and western U. S. models, while some European models also perform fairly well. Moreover, the model performance appears to be strongly dependent on both distance and frequency. The relative information of intensity versus response spectral data is also explored. The strong correlation we obtain between intensity-based rankings and spectral-based ones demonstrates the great potential of macroseismic intensities data for model selection in the context of seismic hazard assessment.}, language = {en} } @book{LoosScherbaum1999, author = {Loos, Wolfgang and Scherbaum, Frank}, title = {Inner earth : a seismosonic symphony}, publisher = {Traumton (Indigo Vertrieb)}, address = {[s.l.]}, pages = {Audio-CD}, year = {1999}, language = {en} } @article{DialloKuleshHolschneideretal.2006, author = {Diallo, Mamadou Sanou and Kulesh, Michail and Holschneider, Matthias and Kurennaya, Kristina and Scherbaum, Frank}, title = {Instantaneous polarization attributes based on an adaptive approximate covariance method}, series = {Geophysics}, volume = {71}, journal = {Geophysics}, number = {5}, publisher = {SEG}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/1.2227522}, pages = {V99 -- V104}, year = {2006}, abstract = {We introduce a method for computing instantaneous-polarization attributes from multicomponent signals. This is an improvement on the standard covariance method (SCM) because it does not depend on the window size used to compute the standard covariance matrix. We overcome the window-size problem by deriving an approximate analytical formula for the cross-energy matrix in which we automatically and adaptively determine the time window. The proposed method uses polarization analysis as applied to multicomponent seismic by waveform separation and filtering.}, language = {en} } @article{DialloKuleshHolschneideretal.2005, author = {Diallo, Mamadou Sanou and Kulesh, Michail and Holschneider, Matthias and Scherbaum, Frank}, title = {Instantaneous polarization attributes in the time-frequency domain and wavefield separation}, issn = {0016-8025}, year = {2005}, abstract = {We introduce a method of wavefield separation from multicomponent data sets based on the use of the continuous wavelet transform. Our method is a further generalization of the approach proposed by Morozov and Smithson, in that by using the continuous wavelet transform, we can achieve a better separation of wave types by designing the filter in the time-frequency domain. Furthermore, using the instantaneous polarization attributes defined in the wavelet domain, we show how to construct filters tailored to separate different wave types (elliptically or linearly polarized), followed by an inverse wavelet transform to obtain the desired wave type in the time domain. Using synthetic and experimental data, we show how the present method can be used for wavefield separation}, language = {en} } @article{WassermannOhrnbergerScherbaumetal.1998, author = {Wassermann, Joachim and Ohrnberger, Matthias and Scherbaum, Frank and Gossler, J. and Zschau, Jochen}, title = {Kontinuierliche seismologische Netz- und Arraymessungen am Dekadenvulkan Merapi (Java, Indonesien) : ein Zwischenres{\"u}mee = Continuous measurements at Merapi volcano (Java, Indonesia) using anetwork of small-scale seismograph arrays}, issn = {0947-1944}, year = {1998}, language = {de} } @article{ScherbaumKuehn2011, author = {Scherbaum, Frank and K{\"u}hn, Nicolas M.}, title = {Logic tree branch weights and probabilities summing up to one is not enough}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {27}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, number = {4}, publisher = {Earthquake Engineering Research Institute}, address = {Oakland}, issn = {8755-2930}, doi = {10.1193/1.3652744}, pages = {1237 -- 1251}, year = {2011}, abstract = {Logic trees have become the most popular tool for the quantification of epistemic uncertainties in probabilistic seismic hazard assessment (PSHA). In a logic-tree framework, epistemic uncertainty is expressed in a set of branch weights, by which an expert or an expert group assigns degree-of-belief values to the applicability of the corresponding branch models. Despite the popularity of logic-trees, however, one finds surprisingly few clear commitments to what logic-tree branch weights are assumed to be (even by hazard analysts designing logic trees). In the present paper we argue that it is important for hazard analysts to accept the probabilistic framework from the beginning for assigning logic-tree branch weights. In other words, to accept that logic-tree branch weights are probabilities in the axiomatic sense, independent of one's preference for the philosophical interpretation of probabilities. We demonstrate that interpreting logic-tree branch weights merely as a numerical measure of "model quality," which are then subsequently normalized to sum up to unity, will with increasing number of models inevitably lead to an apparent insensitivity of hazard curves on the logic-tree branch weights, which may even be mistaken for robustness of the results. Finally, we argue that assigning logic-tree branch weights in a sequential fashion may improve their logical consistency.}, language = {en} } @article{MalischewskyScherbaum2004, author = {Malischewsky, Peter G. and Scherbaum, Frank}, title = {Love's formula and H/V-ratio (ellipticity) of Rayleigh waves}, issn = {0165-2125}, year = {2004}, abstract = {The ellipticity of Rayleigh surface waves, which is an important parameter characterizing the propagation medium, is studied for several models with increasing complexity. While the main focus lies on theory, practical implications of the use of the horizontal to vertical component ratio (H/V-ratio) to Study the subsurface structure are considered as well. Love's approximation of the ellipticity for an incompressible layer over an incompressible half-space is critically discussed especially concerning its applicability for different impedance contrasts. The main result is an analytically exact formula of H/V for a 2-layer model of compressible media, which is a generalization of Love's formula. It turns out that for a limited range of models Love's approximation can be used also in the general case. (C) 2003 Elsevier B.V. All rights reserved}, language = {en} } @article{HaneyKummerowLangenbruchetal.2011, author = {Haney, Frank and Kummerow, J. and Langenbruch, C. and Dinske, C. and Shapiro, Serge A. and Scherbaum, Frank}, title = {Magnitude estimation for microseismicity induced during the KTB 2004/2005 injection experiment}, series = {Geophysics}, volume = {76}, journal = {Geophysics}, number = {6}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2011-0020.1}, pages = {WC47 -- WC53}, year = {2011}, abstract = {We determined the magnitudes of 2540 microseismic events measured at one single 3C borehole geophone at the German Deep Drilling Site (known by the German acronym, KTB) during the injection phase 2004/2005. For this task we developed a three-step approach. First, we estimated local magnitudes of 104 larger events with a standard method based on amplitude measurements at near-surface stations. Second, we investigated a series of parameters to characterize the size of these events using the seismograms of the borehole sensor, and we compared them statistically with the local magnitudes. Third, we extrapolated the regression curve to obtain the magnitudes of 2436 events that were only measured at the borehole geophone. This method improved the magnitude of completeness for the KTB data set by more than one order down to M = -2.75. The resulting b-value for all events was 0.78, which is similar to the b-value obtained from taking only the greater events with standard local magnitude estimation from near-surface stations, b = 0.86. The more complete magnitude catalog was required to study the magnitude distribution with time and to characterize the seismotectonic state of the KTB injection site. The event distribution with time was consistent with prediction from theory assuming pore pressure diffusion as the underlying mechanism to trigger the events. The value we obtained for the seismogenic index of -4 suggested that the seismic hazard potential at the KTB site is comparatively low.}, language = {en} } @article{GianniotisKuehnScherbaum2014, author = {Gianniotis, Nikolaos and Kuehn, Nicolas and Scherbaum, Frank}, title = {Manifold aligned ground motion prediction equations for regional datasets}, series = {Computers \& geosciences : an international journal devoted to the publication of papers on all aspects of geocomputation and to the distribution of computer programs and test data sets ; an official journal of the International Association for Mathematical Geology}, volume = {69}, journal = {Computers \& geosciences : an international journal devoted to the publication of papers on all aspects of geocomputation and to the distribution of computer programs and test data sets ; an official journal of the International Association for Mathematical Geology}, publisher = {Elsevier}, address = {Oxford}, issn = {0098-3004}, doi = {10.1016/j.cageo.2014.04.014}, pages = {72 -- 77}, year = {2014}, abstract = {Inferring a ground-motion prediction equation (GMPE) for a region in which only a small number of seismic events has been observed is a challenging task. A response to this data scarcity is to utilise data from other regions in the hope that there exist common patterns in the generation of ground motion that can contribute to the development of a GMPE for the region in question. This is not an unreasonable course of action since we expect regional GMPEs to be related to each other. In this work we model this relatedness by assuming that the regional GMPEs occupy a common low-dimensional manifold in the space of all possible GMPEs. As a consequence, the GMPEs are fitted in a joint manner and not independent of each other, borrowing predictive strength from each other's regional datasets. Experimentation on a real dataset shows that the manifold assumption displays better predictive performance over fitting regional GMPEs independent of each other. (C) 2014 Elsevier Ltd. All rights reserved.}, language = {en} } @article{HaendelvonSpechtKuehnetal.2015, author = {H{\"a}ndel, Annabel and von Specht, Sebastian and Kuehn, Nicolas M. and Scherbaum, Frank}, title = {Mixtures of ground-motion prediction equations as backbone models for a logic tree: an application to the subduction zone in Northern Chile}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {13}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {2}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-014-9636-7}, pages = {483 -- 501}, year = {2015}, abstract = {In probabilistic seismic hazard analysis, different ground-motion prediction equations (GMPEs) are commonly combined within a logic tree framework. The selection of appropriate GMPEs, however, is a non-trivial task, especially for regions where strong motion data are sparse and where no indigenous GMPE exists because the set of models needs to capture the whole range of ground-motion uncertainty. In this study we investigate the aggregation of GMPEs into a mixture model with the aim to infer a backbone model that is able to represent the center of the ground-motion distribution in a logic tree analysis. This central model can be scaled up and down to obtain the full range of ground-motion uncertainty. The combination of models into a mixture is inferred from observed ground-motion data. We tested the new approach for Northern Chile, a region for which no indigenous GMPE exists. Mixture models were calculated for interface and intraslab type events individually. For each source type we aggregated eight subduction zone GMPEs using mainly new strong-motion data that were recorded within the Plate Boundary Observatory Chile project and that were processed within this study. We can show that the mixture performs better than any of its component GMPEs, and that it performs comparable to a regression model that was derived for the same dataset. The mixture model seems to represent the median ground motions in that region fairly well. It is thus able to serve as a backbone model for the logic tree.}, language = {en} } @article{ScherbaumDelavaudRiggelsen2009, author = {Scherbaum, Frank and Delavaud, Elise and Riggelsen, Carsten}, title = {Model selection in seismic hazard analysis : an information-theoretic perspective}, issn = {0037-1106}, doi = {10.1785/0120080347}, year = {2009}, abstract = {Although the methodological framework of probabilistic seismic hazard analysis is well established, the selection of models to predict the ground motion at the sites of interest remains a major challenge. Information theory provides a powerful theoretical framework that can guide this selection process in a consistent way. From an information- theoretic perspective, the appropriateness of models can be expressed in terms of their relative information loss (Kullback-Leibler distance) and hence in physically meaningful units (bits). In contrast to hypothesis testing, information-theoretic model selection does not require ad hoc decisions regarding significance levels nor does it require the models to be mutually exclusive and collectively exhaustive. The key ingredient, the Kullback-Leibler distance, can be estimated from the statistical expectation of log-likelihoods of observations for the models under consideration. In the present study, data-driven ground-motion model selection based on Kullback-Leibler-distance differences is illustrated for a set of simulated observations of response spectra and macroseismic intensities. Information theory allows for a unified treatment of both quantities. The application of Kullback-Leibler-distance based model selection to real data using the model generating data set for the Abrahamson and Silva (1997) ground-motion model demonstrates the superior performance of the information-theoretic perspective in comparison to earlier attempts at data- driven model selection (e.g., Scherbaum et al., 2004).}, language = {en} } @article{KuleshHolschneiderDialloetal.2005, author = {Kulesh, Michail and Holschneider, Matthias and Diallo, Mamadou Sanou and Xie, Q. and Scherbaum, Frank}, title = {Modeling of wave dispersion using continuous wavelet transforms}, issn = {0033-4553}, year = {2005}, abstract = {In the estimate of dispersion with the help of wavelet analysis considerable emphasis has been put on the extraction of the group velocity using the modulus of the wavelet transform. In this paper we give an asymptotic expression of the full propagator in wavelet space that comprises the phase velocity as well. This operator establishes a relationship between the observed signals at two different stations during wave propagation in a dispersive and attenuating medium. Numerical and experimental examples are presented to show that the method accurately models seismic wave dispersion and attenuation}, language = {en} } @article{KuehnRiggelsenScherbaum2011, author = {K{\"u}hn, Nicolas M. and Riggelsen, Carsten and Scherbaum, Frank}, title = {Modeling the joint probability of earthquake, site, and ground-motion parameters using bayesian networks}, series = {Bulletin of the Seismological Society of America}, volume = {101}, journal = {Bulletin of the Seismological Society of America}, number = {1}, publisher = {Seismological Society of America}, address = {El Cerrito}, issn = {0037-1106}, doi = {10.1785/0120100080}, pages = {235 -- 249}, year = {2011}, abstract = {Bayesian networks are a powerful and increasingly popular tool for reasoning under uncertainty, offering intuitive insight into (probabilistic) data-generating processes. They have been successfully applied to many different fields, including bioinformatics. In this paper, Bayesian networks are used to model the joint-probability distribution of selected earthquake, site, and ground-motion parameters. This provides a probabilistic representation of the independencies and dependencies between these variables. In particular, contrary to classical regression, Bayesian networks do not distinguish between target and predictors, treating each variable as random variable. The capability of Bayesian networks to model the ground-motion domain in probabilistic seismic hazard analysis is shown for a generic situation. A Bayesian network is learned based on a subset of the Next Generation Attenuation (NGA) dataset, using 3342 records from 154 earthquakes. Because no prior assumptions about dependencies between particular parameters are made, the learned network displays the most probable model given the data. The learned network shows that the ground-motion parameter (horizontal peak ground acceleration, PGA) is directly connected only to the moment magnitude, Joyner-Boore distance, fault mechanism, source-to-site azimuth, and depth to a shear-wave horizon of 2: 5 km/s (Z2.5). In particular, the effect of V-S30 is mediated by Z2.5. Comparisons of the PGA distributions based on the Bayesian networks with the NGA model of Boore and Atkinson (2008) show a reasonable agreement in ranges of good data coverage.}, language = {en} } @article{SchmedesHainzlReameretal.2005, author = {Schmedes, J. and Hainzl, Sebastian and Reamer, S. K. and Scherbaum, Frank and Hinzen, K. G.}, title = {Moment release in the Lower Rhine Embayment, Germany : seismological perspective of the deformation process}, issn = {0956-540X}, year = {2005}, abstract = {An important task of seismic hazard assessment consists of estimating the rate of seismic moment release which is correlated to the rate of tectonic deformation and the seismic coupling. However, the estimations of deformation depend on the type of information utilized (e.g. geodetic, geological, seismic) and include large uncertainties. We therefore estimate the deformation rate in the Lower Rhine Embayment (LRE), Germany, using an integrated approach where the uncertainties have been systematically incorporated. On the basis of a new homogeneous earthquake catalogue we initially determine the frequency-magnitude distribution by statistical methods. In particular, we focus on an adequate estimation of the upper bound of the Gutenberg-Richter relation and demonstrate the importance of additional palaeoseis- mological information. The integration of seismological and geological information yields a probability distribution of the upper bound magnitude. Using this distribution together with the distribution of Gutenberg-Richter a and b values, we perform Monte Carlo simulations to derive the seismic moment release as a function of the observation time. The seismic moment release estimated from synthetic earthquake catalogues with short catalogue length is found to systematically underestimate the long-term moment rate which can be analytically determined. The moment release recorded in the LRE over the last 250 yr is found to be in good agreement with the probability distribution resulting from the Monte Carlo simulations. Furthermore, the long-term distribution is within its uncertainties consistent with the moment rate derived by geological measurements, indicating an almost complete seismic coupling in this region. By means of Kostrov's formula, we additionally calculate the full deformation rate tensor using the distribution of known focal mechanisms in LRE. Finally, we use the same approach to calculate the seismic moment and the deformation rate for two subsets of the catalogue corresponding to the east- and west-dipping faults, respectively}, language = {en} } @article{HiemerRoesslerScherbaum2012, author = {Hiemer, Stefan and R{\"o}ßler, Dirk and Scherbaum, Frank}, title = {Monitoring the West Bohemian earthquake swarm in 2008/2009 by a temporary small-aperture seismic array}, series = {Journal of seismology}, volume = {16}, journal = {Journal of seismology}, number = {2}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-011-9256-5}, pages = {169 -- 182}, year = {2012}, abstract = {The most recent intense earthquake swarm in West Bohemia lasted from 6 October 2008 to January 2009. Starting 12 days after the onset, the University of Potsdam monitored the swarm by a temporary small-aperture seismic array at 10 km epicentral distance. The purpose of the installation was a complete monitoring of the swarm including micro-earthquakes (M (L) < 0). We identify earthquakes using a conventional short-term average/long-term average trigger combined with sliding-window frequency-wavenumber and polarisation analyses. The resulting earthquake catalogue consists of 14,530 earthquakes between 19 October 2008 and 18 March 2009 with magnitudes in the range of -aEuro parts per thousand 1.2 a parts per thousand currency signaEuro parts per thousand M (L) a parts per thousand currency signaEuro parts per thousand 2.7. The small-aperture seismic array substantially lowers the detection threshold to about M (c) = -aEuro parts per thousand 0.4, when compared to the regional networks operating in West Bohemia (M (c) > 0.0). In the course of this work, the main temporal features (frequency-magnitude distribution, propagation of back azimuth and horizontal slowness, occurrence rate of aftershock sequences and interevent-time distribution) of the recent 2008/2009 earthquake swarm are presented and discussed. Temporal changes of the coefficient of variation (based on interevent times) suggest that the swarm earthquake activity of the 2008/2009 swarm terminates by 12 January 2009. During the main phase in our studied swarm period after 19 October, the b value of the Gutenberg-Richter relation decreases from 1.2 to 0.8. This trend is also reflected in the power-law behavior of the seismic moment release. The corresponding total seismic moment release of 1.02x10(17) Nm is equivalent to M (L,max) = 5.4.}, language = {en} } @article{BoraCottonScherbaum2019, author = {Bora, Sanjay Singh and Cotton, Fabrice Pierre and Scherbaum, Frank}, title = {NGA-West2 Empirical Fourier and Duration Models to Generate Adjustable Response Spectra}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {35}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, number = {1}, publisher = {Sage Publ.}, address = {Thousand Oaks}, issn = {8755-2930}, doi = {10.1193/110317EQS228M}, pages = {61 -- 93}, year = {2019}, abstract = {Adjustment of median ground motion prediction equations (GMPEs) from one region to another region is one of the major challenges within the current practice of seismic hazard analysis. In our approach of generating response spectra, we derive two separate empirical models for a) Fourier amplitude spectrum (FAS) and b) duration of ground motion. To calculate response spectra, the two models are combined within the random vibration theory (RVT) framework. The models are calibrated on recordings obtained from shallow crustal earthquakes in active tectonic regions. We use a subset of NGA-West2 database with M3.2-7.9 earthquakes at distances 0-300 km. The NGA-West2 database expanded over a wide magnitude and distance range facilitates a better constraint over derived models. A frequency-dependent duration model is derived to obtain adjustable response spectral ordinates. Excellent comparison of our approach with other NGA-West2 models implies that it can also be used as a stand-alone model.}, language = {en} } @misc{ZaliReinKruegeretal.2023, author = {Zali, Zahra and Rein, Teresa and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank}, title = {Ocean bottom seismometer (OBS) noise reduction from horizontal and vertical components using harmonic-percussive separation algorithms}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1320}, issn = {1866-8372}, doi = {10.25932/publishup-58882}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-588828}, pages = {15}, year = {2023}, abstract = {Records from ocean bottom seismometers (OBSs) are highly contaminated by noise, which is much stronger compared to data from most land stations, especially on the horizontal components. As a consequence, the high energy of the oceanic noise at frequencies below 1 Hz considerably complicates the analysis of the teleseismic earthquake signals recorded by OBSs. Previous studies suggested different approaches to remove low-frequency noises from OBS recordings but mainly focused on the vertical component. The records of horizontal components, which are crucial for the application of many methods in passive seismological analysis of body and surface waves, could not be much improved in the teleseismic frequency band. Here we introduce a noise reduction method, which is derived from the harmonic-percussive separation algorithms used in Zali et al. (2021), in order to separate long-lasting narrowband signals from broadband transients in the OBS signal. This leads to significant noise reduction of OBS records on both the vertical and horizontal components and increases the earthquake signal-to-noise ratio (SNR) without distortion of the broadband earthquake waveforms. This is demonstrated through tests with synthetic data. Both SNR and cross-correlation coefficients showed significant improvements for different realistic noise realizations. The application of denoised signals in surface wave analysis and receiver functions is discussed through tests with synthetic and real data.}, language = {en} } @article{ZaliReinKruegeretal.2023, author = {Zali, Zahra and Rein, Teresa and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank}, title = {Ocean bottom seismometer (OBS) noise reduction from horizontal and vertical components using harmonic-percussive separation algorithms}, series = {Solid earth}, volume = {14}, journal = {Solid earth}, number = {2}, publisher = {Coepernicus Publ.}, address = {G{\"o}ttingen}, issn = {1869-9529}, doi = {10.5194/se-14-181-2023}, pages = {181 -- 195}, year = {2023}, abstract = {Records from ocean bottom seismometers (OBSs) are highly contaminated by noise, which is much stronger compared to data from most land stations, especially on the horizontal components. As a consequence, the high energy of the oceanic noise at frequencies below 1 Hz considerably complicates the analysis of the teleseismic earthquake signals recorded by OBSs. Previous studies suggested different approaches to remove low-frequency noises from OBS recordings but mainly focused on the vertical component. The records of horizontal components, which are crucial for the application of many methods in passive seismological analysis of body and surface waves, could not be much improved in the teleseismic frequency band. Here we introduce a noise reduction method, which is derived from the harmonic-percussive separation algorithms used in Zali et al. (2021), in order to separate long-lasting narrowband signals from broadband transients in the OBS signal. This leads to significant noise reduction of OBS records on both the vertical and horizontal components and increases the earthquake signal-to-noise ratio (SNR) without distortion of the broadband earthquake waveforms. This is demonstrated through tests with synthetic data. Both SNR and cross-correlation coefficients showed significant improvements for different realistic noise realizations. The application of denoised signals in surface wave analysis and receiver functions is discussed through tests with synthetic and real data.}, language = {en} } @book{Scherbaum2001, author = {Scherbaum, Frank}, title = {Of poles and zeros : fundamentals of digital seismology}, series = {Modern approaches in geophysics}, volume = {15}, journal = {Modern approaches in geophysics}, edition = {Rev. 2. ed., reprint with corr}, publisher = {Springer}, address = {Dordrecht}, isbn = {0-7923-6834-7}, pages = {265 p.}, year = {2001}, language = {en} } @article{ScherbaumSchmedesCotton2004, author = {Scherbaum, Frank and Schmedes, J. and Cotton, Fabrice Pierre}, title = {On the conversion of source-to-site distance measures for extended earthquake source models}, issn = {0037-1106}, year = {2004}, abstract = {One of the major challenges in engineering seismology is the reliable prediction of site-specific ground motion for particular earthquakes, observed at specific distances. For larger events, a special problem arises, at short distances, with the source-to-site distance measure, because distance metrics based on a point-source model are no longer appropriate. As a consequence, different attenuation relations differ in the distance metric that they use. In addition to being a source of confusion, this causes problems to quantitatively compare or combine different ground- motion models; for example, in the context of Probabilistic Seismic Hazard Assessment, in cases where ground-motion models with different distance metrics occupy neighboring branches of a logic tree. In such a situation, very crude assumptions about source sizes and orientations often have to be used to be able to derive an estimate of the particular metric required. Even if this solves the problem of providing a number to put into the attenuation relation, a serious problem remains. When converting distance measures, the corresponding uncertainties map onto the estimated ground motions according to the laws of error propagation. To make matters worse, conversion of distance metrics can cause the uncertainties of the adapted ground-motion model to become magnitude and distance dependent, even if they are not in the original relation. To be able to treat this problem quantitatively, the variability increase caused by the distance metric conversion has to be quantified. For this purpose, we have used well established scaling laws to determine explicit distance conversion relations using regression analysis on simulated data. We demonstrate that, for all practical purposes, most popular distance metrics can be related to the Joyner-Boore distance using models based on gamma distributions to express the shape of some "residual function." The functional forms are magnitude and distance dependent and are expressed as polynomials. We compare the performance of these relations with manually derived individual distance estimates for the Landers, the Imperial Valley, and the Chi-Chi earthquakes}, language = {en} } @article{BoraScherbaumKuehnetal.2016, author = {Bora, Sanjay Singh and Scherbaum, Frank and Kuehn, Nicolas and Stafford, Peter}, title = {On the Relationship between Fourier and Response Spectra: Implications for the Adjustment of Empirical Ground-Motion Prediction Equations (GMPEs)}, series = {Bulletin of the Seismological Society of America}, volume = {106}, journal = {Bulletin of the Seismological Society of America}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120150129}, pages = {1235 -- 1253}, year = {2016}, abstract = {The functional form of empirical response spectral ground-motion prediction equations (GMPEs) is often derived using concepts borrowed from Fourier spectral modeling of ground motion. As these GMPEs are subsequently calibrated with empirical observations, this may not appear to pose any major problems in the prediction of ground motion for a particular earthquake scenario. However, the assumption that Fourier spectral concepts persist for response spectra can lead to undesirable consequences when it comes to the adjustment of response spectral GMPEs to represent conditions not covered in the original empirical data set. In this context, a couple of important questions arise, for example, what are the distinctions and/or similarities between Fourier and response spectra of ground motions? And, if they are different, then what is the mechanism responsible for such differences and how do adjustments that are made to Fourier amplitude spectrum (FAS) manifest in response spectra? The present article explores the relationship between the Fourier and response spectrum of ground motion by using random vibration theory (RVT). With a simple Brune (1970, 1971) source model, RVT-generated acceleration spectra for a fixed magnitude and distance scenario are used. The RVT analyses reveal that the scaling of low oscillator-frequency response spectral ordinates can be treated as being equivalent to the scaling of the corresponding Fourier spectral ordinates. However, the high oscillator-frequency response spectral ordinates are controlled by a rather wide band of Fourier spectral ordinates. In fact, the peak ground acceleration, counter to the popular perception that it is a reflection of the high-frequency characteristics of ground motion, is controlled by the entire Fourier spectrum of ground motion. Additionally, this article demonstrates how an adjustment made to FAS is similar or different to the same adjustment made to response spectral ordinates. For this purpose, two cases: adjustments to the stress parameter (Delta sigma) (source term), and adjustments to the attributes reflecting site response (V-S - kappa(0)) are considered.}, language = {en} } @article{TranThanhTuanScherbaumMalischewsky2011, author = {Tran Thanh Tuan, and Scherbaum, Frank and Malischewsky, Peter G.}, title = {On the relationship of peaks and troughs of the ellipticity (H/V) of Rayleigh waves and the transmission response of single layer over half-space models}, series = {Geophysical journal international}, volume = {184}, journal = {Geophysical journal international}, number = {2}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2010.04863.x}, pages = {793 -- 800}, year = {2011}, abstract = {One of the key challenges in the context of local site effect studies is the determination of frequencies where the shakeability of the ground is enhanced. In this context, the H/V technique has become increasingly popular and peak frequencies of H/V spectral ratio are sometimes interpreted as resonance frequencies of the transmission response. In the present study, assuming that Rayleigh surface wave is dominant in H/V spectral ratio, we analyse theoretically under which conditions this may be justified and when not. We focus on 'layer over half-space' models which, although seemingly simple, capture many aspects of local site effects in real sedimentary structures. Our starting point is the ellipticity of Rayleigh waves. We use the exact formula of the H/V-ratio presented by Malischewsky \& Scherbaum (2004) to investigate the main characteristics of peak and trough frequencies. We present a simple formula illustrating if and where H/V-ratio curves have sharp peaks in dependence of model parameters. In addition, we have constructed a map, which demonstrates the relation between the H/V-peak frequency and the peak frequency of the transmission response in the domain of the layer's Poisson ratio and the impedance contrast. Finally, we have derived maps showing the relationship between the H/V-peak and trough frequency and key parameters of the model such as impedance contrast. These maps are seen as diagnostic tools, which can help to guide the interpretation of H/V spectral ratio diagrams in the context of site effect studies.}, language = {en} } @article{HinzenWeberScherbaum2004, author = {Hinzen, K. G. and Weber, B. and Scherbaum, Frank}, title = {On the resolution of H/V measurements to determine sediment thickness, a case study across a normal fault in the Lower Rhine Embayment, Germany}, issn = {1363-2469}, year = {2004}, abstract = {In recent years, H/V measurements have been increasingly used to map the thickness of sediment fill in sedimentary basins in the context of seismic hazard assessment. This parameter is believed to be an important proxy for the site effects in sedimentary basins (e.g. in the Los Angeles basin). Here we present the results of a test using this approach across an active normal fault in a structurally well known situation. Measurements on a 50 km long profile with 1 km station spacing clearly show a change in the frequency of the fundamental peak of H/V ratios with increasing thickness of the sediment layer in the eastern part of the Lower Rhine Embayment. Subsequently, a section of 10 km length across the Erft-Sprung system, a normal fault with ca. 750 m vertical offset, was measured with a station distance of 100 m. Frequencies of the first and second peaks and the first trough in the H/V spectra are used in a simple resonance model to estimate depths of the bedrock. While the frequency of the first peak shows a large scatter for sediment depths larger than ca. 500 m, the frequency of the first trough follows the changing thickness of the sediments across the fault. The lateral resolution is in the range of the station distance of 100 m. A power law for the depth dependence of the S-wave velocity derived from down hole measurements in an earlier study [Budny, 1984] and power laws inverted from dispersion analysis of micro array measurements [Scherbaum et al., 2002] agree with the results from the H/V ratios of this study}, language = {en} } @article{BommerDouglasScherbaumetal.2010, author = {Bommer, Julian J. and Douglas, John and Scherbaum, Frank and Cotton, Fabrice Pierre and Bungum, Hilmar and Faeh, Donat}, title = {On the selection of ground-motion prediction equations for seismic hazard analysis}, issn = {0895-0695}, doi = {10.1785/gssrl.81.5.783}, year = {2010}, language = {en} } @article{BommerScherbaumBungumetal.2005, author = {Bommer, Julian J. and Scherbaum, Frank and Bungum, Hilmar and Cotton, Fabrice Pierre and Sabetta, F. and Abrahamson, Norman A.}, title = {On the use of logic trees for ground-motion prediction equations in seismic-hazard analysis}, issn = {0037-1106}, year = {2005}, abstract = {Logic trees are widely used in probabilistic seismic hazard analysis as a tool to capture the epistemic uncertainty associated with the seismogenic sources and the ground-motion prediction models used in estimating the hazard. Combining two or more ground-motion relations within a logic tree will generally require several conversions to be made, because there are several definitions available for both the predicted ground-motion parameters and the explanatory parameters within the predictive ground-motion relations. Procedures for making conversions for each of these factors are presented, using a suite of predictive equations in current use for illustration. The sensitivity of the resulting ground-motion models to these conversions is shown to be pronounced for some of the parameters, especially the measure of source-to-site distance, highlighting the need to take into account any incompatibilities among the selected equations. Procedures are also presented for assigning weights to the branches in the ground-motion section of the logic tree in a transparent fashion, considering both intrinsic merits of the individual equations and their degree of applicability to the particular application}, language = {en} } @article{ScherbaumCottonSmit2004, author = {Scherbaum, Frank and Cotton, Fabrice Pierre and Smit, P.}, title = {On the use of response spectral-reference data for the selection and ranking of ground-motion models for seismic-hazard analysis in regions of moderate seismicity : the case of rock motion}, issn = {0037-1106}, year = {2004}, abstract = {The use of ground-motion-prediction equations to estimate ground shaking has become a very popular approach for seismic-hazard assessment, especially in the framework of a logic-tree approach. Owing to the large number of existing published ground-motion models, however, the selection and ranking of appropriate models for a particular target area often pose serious practical problems. Here we show how observed around-motion records can help to guide this process in a systematic and comprehensible way. A key element in this context is a new, likelihood based, goodness-of-fit measure that has the property not only to quantify the model fit but also to measure in some degree how well the underlying statistical model assumptions are met. By design, this measure naturally scales between 0 and 1, with a value of 0.5 for a situation in which the model perfectly matches the sample distribution both in terms of mean and standard deviation. We have used it in combination with other goodness-of-fit measures to derive a simple classification scheme to quantify how well a candidate ground-rnotion-prediction equation models a particular set of observed-response spectra. This scheme is demonstrated to perform well in recognizing a number of popular ground-motion models from their rock-site- recording, subsets. This indicates its potential for aiding the assignment of logic-tree weights in a consistent and reproducible way. We have applied our scheme to the border region of France, Germany, and Switzerland where the M-w 4.8 St. Die earthquake of 22 February 2003 in eastern France recently provided a small set of observed-response spectra. These records are best modeled by the ground-motion-prediction equation of Berge-Thierry et al. (2003), which is based on the analysis of predominantly European data. The fact that the Swiss model of Bay et al. (2003) is not able to model the observed records in an acceptable way may indicate general problems arising from the use of weak-motion data for strong-motion prediction}, language = {en} } @misc{ReigberWassermannScherbaumetal.2002, author = {Reigber, Christoph and Wassermann, Joachim and Scherbaum, Frank and Dresen, Georg and Zang, Arno and Altenberger, Uwe and Rahmstorf, Stefan and Klein, Armin and Oberh{\"a}nsli, Roland and Herzig, Reinhard}, title = {Portal = Vulkane, Erdbeben, Klima: Der Planet Erde birgt viele Geheimnisse}, number = {01-02/2002}, organization = {Universit{\"a}t Potsdam, Referat f{\"u}r Presse- und {\"O}ffentlichkeitsarbeit}, issn = {1618-6893}, doi = {10.25932/publishup-43954}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439544}, pages = {39}, year = {2002}, abstract = {Aus dem Inhalt: - Vulkane, Erdbeben, Klima: Der Planet Erde birgt viele Geheimnisse - Eine Entdeckungsreise durch die Uni Potsdam auf CD-ROM - Gewitter im Gehirn - Herr der Pflanzen: Wolfgang Pifrement}, language = {de} } @misc{ZimmermannEckardtHornConradetal.2015, author = {Zimmermann, Matthias and Eckardt, Barbara and Horn-Conrad, Antje and J{\"a}ger, Heidi and Kampe, Heike and Scholz, Jana and G{\"o}rlich, Petra and S{\"u}tterlin, Sabine and J{\"a}ger, Sophie and Scherbaum, Frank}, title = {Portal Wissen = Wege}, number = {01/2015}, organization = {Universit{\"a}t Potsdam, Referat f{\"u}r Presse- und {\"O}ffentlichkeitsarbeit}, issn = {2194-4237}, doi = {10.25932/publishup-44085}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-440851}, pages = {99}, year = {2015}, abstract = {Wie Merkmale von Generation zu Generation weitervererbt werden, wie sich die Erbinformation dabei durch Mutationen ver{\"a}ndert und somit zur Auspr{\"a}gung neuer Eigenschaften und der Entstehung neuer Arten beitr{\"a}gt, sind spannende Fragen der Biologie. Genetische Differenzierung f{\"u}hrte im Laufe von Jahrmillionen zur Ausbildung einer schier unglaublichen Artenvielfalt. Die Evolution hat viele Wege beschritten. Sie hat zu großartiger nat{\"u}rlicher Biodiversit{\"a}t gef{\"u}hrt - zu Organismen, die an sehr unterschiedliche Umwelten angepasst sind und zum Teil eine ulkige Gestalt haben oder ein merkw{\"u}rdiges Verhalten zeigen. Aber auch die von Menschenhand gemachte Biodiversit{\"a}t ist {\"u}berw{\"a}ltigend - man denke nur an die 10.000 verschiedenen Rosensorten, die uns entz{\"u}cken, oder die Myriaden unterschiedlicher Weizen-, Gerste- oder Maisvarianten; Pflanzen, die allesamt fr{\"u}her einmal einfache Gr{\"a}ser waren, uns heute aber ern{\"a}hren. Wir Menschen schaffen eine eigene Biodiversit{\"a}t, eine, die die Natur selbst nicht kennt. Und wir „fahren" gut damit. Dank der Genomforschung k{\"o}nnen wir heute die gesamte Erbinformation von Organismen in wenigen Stunden bis Tagen aus- lesen. Sehr viel l{\"a}nger dauert es aber, die zahlreichen Abschnitte eines Genoms funktionell zu kartieren. Die Wissenschaftler bedienen sich dazu vielf{\"a}ltiger Methoden: Dabei geh{\"o}rt es heute weltweit zum Standardrepertoire, Gene gezielt zu inaktivieren oder zu aktivieren, ihren Code zu modifizieren oder Erbinformationen zwischen Organismen auszutauschen. Dennoch sind die Wege, die zur Erkenntnis f{\"u}hren, oft verschlungen. Nicht selten m{\"u}ssen ausgekl{\"u}gelte experimentelle Ans{\"a}tze gew{\"a}hlt werden, um neue Einsichten in biologische Prozesse zu gewinnen. Mit den Methoden der Genomforschung k{\"o}nnen wir nicht nur das erkunden, was sich in der Natur „da draußen" findet. Wir k{\"o}nnen auch fragen: „Wie verh{\"a}lt sich ein Lebewesen, beispielsweise ein Moos, eigentlich, wenn wir es zur International Space Station (ISS) schicken? Und k{\"o}nnen wir daraus Kenntnisse gewinnen {\"u}ber die Anpassungsstrategien von Lebewesen an harsche Umweltbedingungen oder gar f{\"u}r eine sp{\"a}tere Besiedlung des Mondes oder des Mars´?" Oder k{\"o}nnen wir mithilfe der synthetischen Biologie Mikroorganismen pr{\"a}zise, quasi am Reißbrett geplant, so ver{\"a}ndern, dass neue Optionen f{\"u}r die Behandlung von Krankheiten und f{\"u}r die Herstellung innovativer biobasierter Produkte entstehen? Die Antwort auf beide Fragen lautet eindeutig: Ja! (Wenngleich ein Umzug auf andere Planeten derzeit nat{\"u}rlich nicht vornan steht.). Landnutzung durch den Menschen bestimmt die Biodiversit{\"a}t. Andererseits tragen Organismen zur landschaftlichen Formenbildung bei und beeinflussen {\"u}ber kurz oder lang die Zusammensetzung unserer Atmosph{\"a}re. Auch hier gibt es spannende Fragen, mit denen sich die Forschung besch{\"a}ftigt. Um neue Erkenntnisse zu gewinnen, m{\"u}ssen Forscher immer wieder neue Wege einschlagen. Oft kreuzen sich auch Pfade. So war es beispielsweise vor wenigen Jahren noch kaum absehbar, wir stark die {\"o}kologische Forschung beispielsweise von den schnellen DNA-Sequenziermethoden profitieren w{\"u}rde, und die Genomforscher unter uns konnten kaum erahnen, wie die gleichen Techniken uns neue M{\"o}glichkeiten an die Hand geben sollten, die hochkomplexe Regulation in Zellen zu untersuchen und f{\"u}r die Optimierung biotechnologischer Prozesse zu nutzen. Beispiele aus den vielf{\"a}ltigen Facetten der biologischen Forschung finden Sie - neben anderen interessanten Beitr{\"a}gen - in der aktuellen Ausgabe von „Portal Wissen". Ich w{\"u}nsche Ihnen eine anregende Lekt{\"u}re! Prof. Dr. Bernd M{\"u}ller-R{\"o}ber Professor f{\"u}r Molekularbiologie}, language = {de} } @article{BeauvalHainzlScherbaum2006, author = {Beauval, C{\´e}line and Hainzl, Sebastian and Scherbaum, Frank}, title = {Probabilistic seismic hazard estimation in low-seismicity regions considering non-Poissonian seismic occurrence}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2006.02863.x}, year = {2006}, abstract = {In low-seismicity regions, such as France or Germany, the estimation of probabilistic seismic hazard must cope with the difficult identification of active faults and with the low amount of seismic data available. Since the probabilistic hazard method was initiated, most studies assume a Poissonian occurrence of earthquakes. Here we propose a method that enables the inclusion of time and space dependences between earthquakes into the probabilistic estimation of hazard. Combining the seismicity model Epidemic Type Aftershocks-Sequence (ETAS) with a Monte Carlo technique, aftershocks are naturally accounted for in the hazard determination. The method is applied to the Pyrenees region in Southern France. The impact on hazard of declustering and of the usual assumption that earthquakes occur according to a Poisson process is quantified, showing that aftershocks contribute on average less than 5 per cent to the probabilistic hazard, with an upper bound around 18 per cent}, language = {en} } @article{BlaserOhrnbergerKruegeretal.2012, author = {Blaser, Lilian and Ohrnberger, Matthias and Kr{\"u}ger, Frank and Scherbaum, Frank}, title = {Probabilistic tsunami threat assessment of 10 recent earthquakes offshore Sumatra}, series = {Geophysical journal international}, volume = {188}, journal = {Geophysical journal international}, number = {3}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2011.05324.x}, pages = {1273 -- 1284}, year = {2012}, abstract = {Tsunami early warning (TEW) is a challenging task as a decision has to be made within few minutes on the basis of incomplete and error-prone data. Deterministic warning systems have difficulties in integrating and quantifying the intrinsic uncertainties. In contrast, probabilistic approaches provide a framework that handles uncertainties in a natural way. Recently, we have proposed a method using Bayesian networks (BNs) that takes into account the uncertainties of seismic source parameter estimates in TEW. In this follow-up study, the method is applied to 10 recent large earthquakes offshore Sumatra and tested for its performance. We have evaluated both the general model performance given the best knowledge we have today about the source parameters of the 10 events and the corresponding response on seismic source information evaluated in real-time. We find that the resulting site-specific warning level probabilities represent well the available tsunami wave measurements and observations. Difficulties occur in the real-time tsunami assessment if the moment magnitude estimate is severely over- or underestimated. In general, the probabilistic analysis reveals a considerably large range of uncertainties in the near-field TEW. By quantifying the uncertainties the BN analysis provides important additional information to a decision maker in a warning centre to deal with the complexity in TEW and to reason under uncertainty.}, language = {en} } @article{BlaserKruegerOhrnbergeretal.2010, author = {Blaser, Lilian and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank}, title = {Scaling relations of earthquake source parameter estimates with special focus on subduction environment}, issn = {0037-1106}, doi = {10.1785/0120100111}, year = {2010}, abstract = {Earthquake rupture length and width estimates are in demand in many seismological applications. Earthquake magnitude estimates are often available, whereas the geometrical extensions of the rupture fault mostly are lacking. Therefore, scaling relations are needed to derive length and width from magnitude. Most frequently used are the relationships of Wells and Coppersmith (1994) derived on the basis of a large dataset including all slip types with the exception of thrust faulting events in subduction environments. However, there are many applications dealing with earthquakes in subduction zones because of their high seismic and tsunamigenic potential. There are no well-established scaling relations for moment magnitude and length/width for subduction events. Within this study, we compiled a large database of source parameter estimates of 283 earthquakes. All focal mechanisms are represented, but special focus is set on (large) subduction zone events, in particular. Scaling relations were fitted with linear least-square as well as orthogonal regression and analyzed regarding the difference between continental and subduction zone/oceanic relationships. Additionally, the effect of technical progress in earthquake parameter estimation on scaling relations was tested as well as the influence of different fault mechanisms. For a given moment magnitude we found shorter but wider rupture areas of thrust events compared to Wells and Coppersmith (1994). The thrust event relationships for pure continental and pure subduction zone rupture areas were found to be almost identical. The scaling relations differ significantly for slip types. The exclusion of events prior to 1964 when the worldwide standard seismic network was established resulted in a remarkable effect on strike-slip scaling relations: the data do not show any saturation of rupture width of strike- slip earthquakes. Generally, rupture area seems to scale with mean slip independent of magnitude. The aspect ratio L/W, however, depends on moment and differs for each slip type.}, language = {en} } @article{MolkenthinScherbaumGriewanketal.2015, author = {Molkenthin, Christian and Scherbaum, Frank and Griewank, Andreas and K{\"u}hn, Nicolas and Stafford, Peter J. and Leovey, Hernan}, title = {Sensitivity of Probabilistic Seismic Hazard Obtained by Algorithmic Differentiation: A Feasibility Study}, series = {Bulletin of the Seismological Society of America}, volume = {105}, journal = {Bulletin of the Seismological Society of America}, number = {3}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120140294}, pages = {1810 -- 1822}, year = {2015}, abstract = {Probabilistic seismic-hazard analysis (PSHA) is the current tool of the trade used to estimate the future seismic demands at a site of interest. A modern PSHA represents a complex framework that combines different models with numerous inputs. It is important to understand and assess the impact of these inputs on the model output in a quantitative way. Sensitivity analysis is a valuable tool for quantifying changes of a model output as inputs are perturbed, identifying critical input parameters, and obtaining insight about the model behavior. Differential sensitivity analysis relies on calculating first-order partial derivatives of the model output with respect to its inputs; however, obtaining the derivatives of complex models can be challenging. In this study, we show how differential sensitivity analysis of a complex framework such as PSHA can be carried out using algorithmic/automatic differentiation (AD). AD has already been successfully applied for sensitivity analyses in various domains such as oceanography and aerodynamics. First, we demonstrate the feasibility of the AD methodology by comparing AD-derived sensitivities with analytically derived sensitivities for a basic case of PSHA using a simple ground-motion prediction equation. Second, we derive sensitivities via AD for a more complex PSHA study using a stochastic simulation approach for the prediction of ground motions. The presented approach is general enough to accommodate more advanced PSHA studies of greater complexity.}, language = {en} } @article{HinzenReamerScherbaum2013, author = {Hinzen, Klaus-G and Reamer, Sharon K. and Scherbaum, Frank}, title = {Slow fourier transform}, series = {Seismological research letters}, volume = {84}, journal = {Seismological research letters}, number = {2}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0895-0695}, doi = {10.1785/0220120139}, pages = {251 -- 257}, year = {2013}, language = {en} } @article{ThomasWeberWicksetal.1999, author = {Thomas, Ch. and Weber, Michael H. and Wicks, Chuck and Scherbaum, Frank}, title = {Small scatterers in the lower mantle observed at German broadband arrays}, year = {1999}, language = {en} } @misc{RoesslerHiemerBachetal.2009, author = {R{\"o}ßler, Dirk and Hiemer, Stephan and Bach, Christoph and Delavaud, Elise and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Sauer, David and Scherbaum, Frank and Vollmer, Daniel}, title = {Small-aperture seismic array monitors Vogtland earthquake swarm in 2008/09}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29185}, year = {2009}, abstract = {The most recent intense earthquake swarm in the Vogtland lasted from 6 October 2008 until January 2009. Greatest magnitudes exceeded M3.5 several times in October making it the greatest swarm since 1985/86. In contrast to the swarms in 1985 and 2000, seismic moment release was concentrated near swarm onset. Focal area and temporal evolution are similar to the swarm in 2000. Work hypothysis: uprising upper-mantle fluids trigger swarm earthquakes at low stress level. To monitor the seismicity, the University of Potsdam operated a small aperture seismic array at 10 km epicentral distance between 18 October 2008 and 18 March 2009. Consisting of 12 seismic stations and 3 additional microphones, the array is capable of detecting earthquakes from larger to very low magnitudes (M<-1) as well as associated air waves. We use array techniques to determine properties of the incoming wavefield: noise, direct P and S waves, and converted phases.}, language = {en} } @article{FalsaperlaWassermannScherbaum2002, author = {Falsaperla, Susanna and Wassermann, Joachim and Scherbaum, Frank}, title = {Solid earth - 29. Polarization analyses of broadband seismic data recorded on Stromboli Volcano (Italy) from 1996 to 1999 (DOI 10.1029-2001GLO14300)}, year = {2002}, language = {en} } @inproceedings{HainzlScherbaumZoeller2006, author = {Hainzl, Sebastian and Scherbaum, Frank and Z{\"o}ller, Gert}, title = {Spatiotemporal earthquake patterns}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7267}, year = {2006}, abstract = {Interdisziplin{\"a}res Zentrum f{\"u}r Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006}, language = {en} } @article{FaenzaHainzlScherbaum2009, author = {Faenza, Licia and Hainzl, Sebastian and Scherbaum, Frank}, title = {Statistical analysis of the Central-Europe seismicity}, issn = {0040-1951}, doi = {10.1016/j.tecto.2008.04.030}, year = {2009}, abstract = {The aim of this paper is to characterize the spatio-temporal distribution of Central-Europe seismicity. Specifically, by using a non-parametric statistical approach, the proportional hazard model, leading to an empirical estimation of the hazard function, we provide some constrains on the time behavior of earthquake generation mechanisms. The results indicate that the most conspicuous characteristics of M-w 4.0+ earthquakes is a temporal clustering lasting a couple of years. This suggests that the probability of occurrence increases immediately after a previous event. After a few years, the process becomes almost time independent. Furthermore, we investigate the cluster properties of the seismicity of Central-Europe, by comparing the obtained result with the one of synthetic catalogs generated by the epidemic type aftershock sequences (ETAS) model, which previously have been successfully applied for short term clustering. Our results indicate that the ETAS is not well suited to describe the seismicity as a whole, while it is able to capture the features of the short- term behaviour. Remarkably, similar results have been previously found for Italy using a higher magnitude threshold.}, language = {en} } @article{BoraCottonScherbaumetal.2017, author = {Bora, Sanjay Singh and Cotton, Fabrice Pierre and Scherbaum, Frank and Edwards, Benjamin and Traversa, Paola}, title = {Stochastic source, path and site attenuation parameters and associated variabilities for shallow crustal European earthquakes}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {15}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-017-0167-x}, pages = {4531 -- 4561}, year = {2017}, abstract = {We have analyzed the recently developed pan-European strong motion database, RESORCE-2012: spectral parameters, such as stress drop (stress parameter, Delta sigma), anelastic attenuation (Q), near surface attenuation (kappa(0)) and site amplification have been estimated from observed strong motion recordings. The selected dataset exhibits a bilinear distance-dependent Q model with average kappa(0) value 0.0308 s. Strong regional variations in inelastic attenuation were also observed: frequency-independent Q(0) of 1462 and 601 were estimated for Turkish and Italian data respectively. Due to the strong coupling between Q and kappa(0), the regional variations in Q have strong impact on the estimation of near surface attenuation kappa(0). kappa(0) was estimated as 0.0457 and 0.0261 s for Turkey and Italy respectively. Furthermore, a detailed analysis of the variability in estimated kappa(0) revealed significant within-station variability. The linear site amplification factors were constrained from residual analysis at each station and site-class type. Using the regional Q(0) model and a site-class specific kappa(0), seismic moments (M-0) and source corner frequencies f (c) were estimated from the site corrected empirical Fourier spectra. Delta sigma did not exhibit magnitude dependence. The median Delta sigma value was obtained as 5.75 and 5.65 MPa from inverted and database magnitudes respectively. A comparison of response spectra from the stochastic model (derived herein) with that from (regional) ground motion prediction equations (GMPEs) suggests that the presented seismological parameters can be used to represent the corresponding seismological attributes of the regional GMPEs in a host-to-target adjustment framework. The analysis presented herein can be considered as an update of that undertaken for the previous Euro-Mediterranean strong motion database presented by Edwards and Fah (Geophys J Int 194(2):1190-1202, 2013a).}, language = {en} } @article{DelavaudScherbaumKuehnetal.2012, author = {Delavaud, Elise and Scherbaum, Frank and K{\"u}hn, Nicolas and Allen, Trevor}, title = {Testing the global applicability of ground-motion prediction equations for active shallow crustal regions}, series = {Bulletin of the Seismological Society of America}, volume = {102}, journal = {Bulletin of the Seismological Society of America}, number = {2}, publisher = {Seismological Society of America}, address = {El Cerrito}, issn = {0037-1106}, doi = {10.1785/0120110113}, pages = {707 -- 721}, year = {2012}, abstract = {Large research initiatives such as the Global Earthquake Model (GEM) or the Seismic HAzard haRmonization in Europe (SHARE) projects concentrate a great collaborative effort on defining a global standard for seismic hazard estimations. In this context, there is an increasing need for identifying ground-motion prediction equations (GMPEs) that can be applied at both global and regional scale. With increasing amounts of strong-motion records that are now available worldwide, observational data can provide a valuable resource to tackle this question. Using the global dataset of Allen and Wald (2009), we evaluate the ability of 11 GMPEs to predict ground-motion in different active shallow crustal regions worldwide. Adopting the approach of Scherbaum et al. (2009), we rank these GMPEs according to their likelihood of having generated the data. In particular, we estimate how strongly data support or reject the models with respect to the state of noninformativeness defined by a uniform weighting. Such rankings derived from this particular global dataset enable us to explore the potential of GMPEs to predict ground motions in their host region and also in other regions depending on the magnitude and distance considered. In the ranking process, we particularly focus on the influence of the distribution of the testing dataset compared with the GMPE's native dataset. One of the results of this study is that some nonindigenous models present a high degree of consistency with the data from a target region. Two models in particular demonstrated a strong power of geographically wide applicability in different geographic regions with respect to the testing dataset: the models of Akkar and Bommer (2010) and Chiou et al. (2010).}, language = {en} } @article{KruegerScherbaum2014, author = {Kr{\"u}ger, Frank and Scherbaum, Frank}, title = {The 29 September 1969, Ceres, South Africa, Earthquake: full waveform moment tensor inversion for point source and kinematic source parameters}, series = {Bulletin of the Seismological Society of America}, volume = {104}, journal = {Bulletin of the Seismological Society of America}, number = {1}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120130209}, pages = {576 -- 581}, year = {2014}, abstract = {The Ceres earthquake of 29 September 1969 is the largest known earthquake in southern Africa. Digitized analog recordings from Worldwide Standardized Seismographic Network stations (Powell and Fries, 1964) are used to retrieve the point source moment tensor and the most likely centroid depth of the event using full waveform modeling. A scalar seismic moment of 2.2-2.4 x 10(18) N center dot m corresponding to a moment magnitude of 6.2-6.3 is found. The analysis confirms the pure strike-slip mechanism previously determined from onset polarities by Green and Bloch (1971). Overall good agreement with the fault orientation previously estimated from local aftershock recordings is found. The centroid depth can be constrained to be less than 15 km. In a second analysis step, we use a higher order moment tensor based inversion scheme for simple extended rupture models to constrain the lateral fault dimensions. We find rupture propagated unilaterally for 4.7 s from east-southwest to west-northwest for about 17 km ( average rupture velocity of about 3: 1 km/s).}, language = {en} } @article{BommerAbrahamsonStrasseretal.2004, author = {Bommer, Julian J. and Abrahamson, Norman A. and Strasser, F. O. and Pecker, Alain and Bard, Pierre-Yves and Bungum, Hilmar and Cotton, Fabrice Pierre and F{\"a}h, Donat and Sabetta, F. and Scherbaum, Frank and Studer, Jost}, title = {The challenge of defining upper bounds on earthquake ground motions}, issn = {0895-0695}, year = {2004}, language = {en} } @article{WeberAbuAyyashAbueladasetal.2004, author = {Weber, Michael H. and Abu-Ayyash, Khalil and Abueladas, Abdel-Rahman and Agnon, Amotz and Al-Amoush, H. and Babeyko, Andrey and Bartov, Yosef and Baumann, M. and Ben-Avraham, Zvi and Bock, G{\"u}nter and Bribach, Jens and El-Kelani, R. and Forster, A. and F{\"o}rster, Hans-J{\"u}rgen and Frieslander, U. and Garfunkel, Zvi and Grunewald, Steffen and Gotze, Hans-J{\"u}rgen and Haak, Volker and Haberland, Christian and Hassouneh, Mohammed and Helwig, S. and Hofstetter, Alfons and Jackel, K. H. and Kesten, Dagmar and Kind, Rainer and Maercklin, Nils and Mechie, James and Mohsen, Amjad and Neubauer, F. M. and Oberh{\"a}nsli, Roland and Qabbani, I. and Ritter, O. and Rumpker, G. and Rybakov, M. and Ryberg, Trond and Scherbaum, Frank and Schmidt, J. and Schulze, A. and Sobolev, Stephan Vladimir and Stiller, M. and Th,}, title = {The crustal structure of the Dead Sea Transform}, year = {2004}, abstract = {To address one of the central questions of plate tectonics-How do large transform systems work and what are their typical features?-seismic investigations across the Dead Sea Transform (DST), the boundary between the African and Arabian plates in the Middle East, were conducted for the first time. A major component of these investigations was a combined reflection/ refraction survey across the territories of Palestine, Israel and Jordan. The main results of this study are: (1) The seismic basement is offset by 3-5 km under the DST, (2) The DST cuts through the entire crust, broadening in the lower crust, (3) Strong lower crustal reflectors are imaged only on one side of the DST, (4) The seismic velocity sections show a steady increase in the depth of the crust-mantle transition (Moho) from 26 km at the Mediterranean to 39 km under the Jordan highlands, with only a small but visible, asymmetric topography of the Moho under the DST. These observations can be linked to the left-lateral movement of 105 km of the two plates in the last 17 Myr, accompanied by strong deformation within a narrow zone cutting through the entire crust. Comparing the DST and the San Andreas Fault (SAF) system, a strong asymmetry in subhorizontal lower crustal reflectors and a deep reaching deformation zone both occur around the DST and the SAF. The fact that such lower crustal reflectors and deep deformation zones are observed in such different transform systems suggests that these structures are possibly fundamental features of large transform plate boundaries}, language = {en} } @article{ScherbaumWeberBorm2000, author = {Scherbaum, Frank and Weber, Michael H. and Borm, G.}, title = {The deep seismological lab in the KTB borehole: Status 1999}, year = {2000}, language = {en} } @article{ScherbaumCottonStaedtke2006, author = {Scherbaum, Frank and Cotton, Fabrice Pierre and Staedtke, Helmut}, title = {The estimation of minimum-misfit stochastic models from empirical ground-motion prediction equations}, doi = {10.1785/0120050015}, year = {2006}, abstract = {In areas of moderate to low seismic activity there is commonly a lack of recorded strong ground motion. As a consequence, the prediction of ground motion expected for hypothetical future earthquakes is often performed by employing empirical models from other regions. In this context, Campbell's hybrid empirical approach (Campbell, 2003, 2004) provides a methodological framework to adapt ground-motion prediction equations to arbitrary target regions by using response spectral host-to-target-region-conversion filters. For this purpose, the empirical ground-motion prediction equation has to be quantified in terms of a stochastic model. The problem we address here is how to do this in a systematic way and how to assess the corresponding uncertainties. For the determination of the model parameters we use a genetic algorithm search. The stochastic model spectra were calculated by using a speed-optimized version of SMSIM (Boore, 2000). For most of the empirical ground-motion models, we obtain sets of stochastic models that match the empirical models within the full magnitude and distance ranges of their generating data sets fairly well. The overall quality of fit and the resulting model parameter sets strongly depend on the particular choice of the distance metric used for the stochastic model. We suggest the use of the hypocentral distance metric for the stochastic Simulation of strong ground motion because it provides the lowest-misfit stochastic models for most empirical equations. This is in agreement with the results of two recent studies of hypocenter locations in finite-source models which indicate that hypocenters are often located close to regions of large slip (Mai et al., 2005; Manighetti et al., 2005). Because essentially all empirical ground-motion prediction equations contain data from different geographical regions, the model parameters corresponding to the lowest-misfit stochastic models cannot necessarily be expected to represent single, physically realizable host regions but to model the generating data sets in an average way. In addition, the differences between the lowest-misfit stochastic models and the empirical ground-motion prediction equation are strongly distance, magnitude, and frequency dependent, which, according to the laws of uncertainty propagation, will increase the variance of the corresponding hybrid empirical model predictions (Scherbaum et al., 2005). As a consequence, the selection of empirical ground-motion models for host-to-target-region conversions requires considerable judgment of the ground-motion analyst}, language = {en} } @article{RietbrockScherbaum1998, author = {Rietbrock, Andreas and Scherbaum, Frank}, title = {The GIANT analysis system (Graphical Interaktive Aftershock Network Toolbox)}, year = {1998}, language = {en} } @article{BeauvalHainzlScherbaum2006, author = {Beauval, Celine and Hainzl, Sebastian and Scherbaum, Frank}, title = {The impact of the spatial uniform distribution of seismicity on probabilistic seismic-hazard estimation}, series = {Bulletin of the Seismological Society of America}, volume = {96}, journal = {Bulletin of the Seismological Society of America}, number = {6}, publisher = {GeoScienceWorld}, address = {Alexandria, Va.}, issn = {0037-1106}, doi = {10.1785/0120060073}, pages = {2465 -- 2471}, year = {2006}, abstract = {The first step in the estimation of probabilistic seismic hazard in a region commonly consists of the definition and characterization of the relevant seismic sources. Because in low-seismicity regions seismicity is often rather diffuse and faults are difficult to identify, large areal source zones are mostly used. The corresponding hypothesis is that seismicity is uniformly distributed inside each areal seismic source zone. In this study, the impact of this hypothesis on the probabilistic hazard estimation is quantified through the generation of synthetic spatial seismicity distributions. Fractal seismicity distributions are generated inside a given source zone and probabilistic hazard is computed for a set of sites located inside this zone. In our study, the impact of the spatial seismicity distribution is defined as the deviation from the hazard value obtained for a spatially uniform seismicity distribution. From the generation of a large number of synthetic distributions, the correlation between the fractal dimension D and the impact is derived. The results show that the assumption of spatially uniform seismicity tends to bias the hazard to higher values. The correlation can be used to determine the systematic biases and uncertainties for hazard estimations in real cases, where the fractal dimension has been determined. We apply the technique in Germany (Cologne area) and in France (Alps).}, language = {en} } @article{AlAtikAbrahamsonBommeretal.2010, author = {Al Atik, Linda and Abrahamson, Norman A. and Bommer, Julian J. and Scherbaum, Frank and Cotton, Fabrice Pierre and Kuehn, Nicolas}, title = {The variability of ground-motion prediction models and its components}, issn = {0895-0695}, doi = {10.1785/gssrl.81.5.794}, year = {2010}, language = {en} } @book{ScherbaumMzhavanadzeArometal.2020, author = {Scherbaum, Frank and Mzhavanadze, Nana and Arom, Simha and Rosenzweig, Sebastian and M{\"u}ller, Meinard}, title = {Tonal Organization of the Erkomaishvili Dataset: Pitches, Scales, Melodies and Harmonies}, series = {Computational Analysis Of Traditional Georgian Vocal Music}, journal = {Computational Analysis Of Traditional Georgian Vocal Music}, number = {1}, editor = {Scherbaum, Frank}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {2702-2641}, doi = {10.25932/publishup-47614}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476141}, publisher = {Universit{\"a}t Potsdam}, pages = {64}, year = {2020}, abstract = {In this study we examine the tonal organization of a series of recordings of liturgical chants, sung in 1966 by the Georgian master singer Artem Erkomaishvili. This dataset is the oldest corpus of Georgian chants from which the time synchronous F0-trajectories for all three voices have been reliably determined (M{\"u}ller et al. 2017). It is therefore of outstanding importance for the understanding of the tuning principles of traditional Georgian vocal music. The aim of the present study is to use various computational methods to analyze what these recordings can contribute to the ongoing scientific dispute about traditional Georgian tuning systems. Starting point for the present analysis is the re-release of the original audio data together with estimated fundamental frequency (F0) trajectories for each of the three voices, beat annotations, and digital scores (Rosenzweig et al. 2020). We present synoptic models for the pitch and the harmonic interval distributions, which are the first of such models for which the complete Erkomaishvili dataset was used. We show that these distributions can be very compactly be expressed as Gaussian mixture models, anchored on discrete sets of pitch or interval values for the pitch and interval distributions, respectively. As part of our study we demonstrate that these pitch values, which we refer to as scale pitches, and which are determined as the mean values of the Gaussian mixture elements, define the scale degrees of the melodic sound scales which build the skeleton of Artem Erkomaishvili's intonation. The observation of consistent pitch bending of notes in melodic phrases, which appear in identical form in a group of chants, as well as the observation of harmonically driven intonation adjustments, which are clearly documented for all pure harmonic intervals, demonstrate that Artem Erkomaishvili intentionally deviates from the scale pitch skeleton quite freely. As a central result of our study, we proof that this melodic freedom is always constrained by the attracting influence of the scale pitches. Deviations of the F0-values of individual note events from the scale pitches at one instance of time are compensated for in the subsequent melodic steps. This suggests a deviation-compensation mechanism at the core of Artem Erkomaishvili's melody generation, which clearly honors the scales but still allows for a large degree of melodic flexibility. This model, which summarizes all partial aspects of our analysis, is consistent with the melodic scale models derived from the observed pitch distributions, as well as with the melodic and harmonic interval distributions. In addition to the tangible results of our work, we believe that our work has general implications for the determination of tuning models from audio data, in particular for non-tempered music.}, language = {en} } @article{DelavaudCottonAkkaretal.2012, author = {Delavaud, Elise and Cotton, Fabrice Pierre and Akkar, Sinan and Scherbaum, Frank and Danciu, Laurentiu and Beauval, Celine and Drouet, Stephane and Douglas, John and Basili, Roberto and Sandikkaya, M. Abdullah and Segou, Margaret and Faccioli, Ezio and Theodoulidis, Nikos}, title = {Toward a ground-motion logic tree for probabilistic seismic hazard assessment in Europe}, series = {Journal of seismology}, volume = {16}, journal = {Journal of seismology}, number = {3}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-012-9281-z}, pages = {451 -- 473}, year = {2012}, abstract = {The Seismic Hazard Harmonization in Europe (SHARE) project, which began in June 2009, aims at establishing new standards for probabilistic seismic hazard assessment in the Euro-Mediterranean region. In this context, a logic tree for ground-motion prediction in Europe has been constructed. Ground-motion prediction equations (GMPEs) and weights have been determined so that the logic tree captures epistemic uncertainty in ground-motion prediction for six different tectonic regimes in Europe. Here we present the strategy that we adopted to build such a logic tree. This strategy has the particularity of combining two complementary and independent approaches: expert judgment and data testing. A set of six experts was asked to weight pre-selected GMPEs while the ability of these GMPEs to predict available data was evaluated with the method of Scherbaum et al. (Bull Seismol Soc Am 99:3234-3247, 2009). Results of both approaches were taken into account to commonly select the smallest set of GMPEs to capture the uncertainty in ground-motion prediction in Europe. For stable continental regions, two models, both from eastern North America, have been selected for shields, and three GMPEs from active shallow crustal regions have been added for continental crust. For subduction zones, four models, all non-European, have been chosen. Finally, for active shallow crustal regions, we selected four models, each of them from a different host region but only two of them were kept for long periods. In most cases, a common agreement has been also reached for the weights. In case of divergence, a sensitivity analysis of the weights on the seismic hazard has been conducted, showing that once the GMPEs have been selected, the associated set of weights has a smaller influence on the hazard.}, language = {en} } @article{KoehlerOhrnbergerScherbaum2009, author = {Koehler, Andreas and Ohrnberger, Matthias and Scherbaum, Frank}, title = {Unsupervised feature selection and general pattern discovery using Self-Organizing Maps for gaining insights into the nature of seismic wavefields}, issn = {0098-3004}, doi = {10.1016/j.cageo.2009.02.004}, year = {2009}, abstract = {This study presents an unsupervised feature selection and learning approach for the discovery and intuitive imaging of significant temporal patterns in seismic single-station or network recordings. For this purpose, the data are parametrized by real-valued feature vectors for short time windows using standard analysis tools for seismic data, such as frequency-wavenumber, polarization, and spectral analysis. We use Self-Organizing Maps (SOMs) for a data-driven feature selection, visualization and clustering procedure, which is in particular suitable for high-dimensional data sets. Our feature selection method is based on significance testing using the Wald-Wolfowitz runs test for-individual features and on correlation hunting with SOMs in feature subsets. Using synthetics composed of Rayleigh and Love waves and real-world data, we show the robustness and the improved discriminative power of that approach compared to feature subsets manually selected from individual wavefield parametrization methods. Furthermore, the capability of the clustering and visualization techniques to investigate the discrimination of wave phases is shown by means of synthetic waveforms and regional earthquake recordings.}, language = {en} } @article{ZaliOhrnbergerScherbaumetal.2021, author = {Zali, Zahra and Ohrnberger, Matthias and Scherbaum, Frank and Cotton, Fabrice and Eibl, Eva P. S.}, title = {Volcanic tremor extraction and earthquake detection using music information retrieval algorithms}, series = {Seismological research letters}, volume = {92}, journal = {Seismological research letters}, number = {6}, publisher = {Seismological Society of America}, address = {Boulder, Colo.}, issn = {0895-0695}, doi = {10.1785/0220210016}, pages = {3668 -- 3681}, year = {2021}, abstract = {Volcanic tremor signals are usually observed before or during volcanic eruptions and must be monitored to evaluate the volcanic activity. A challenge in studying seismic signals of volcanic origin is the coexistence of transient signal swarms and long-lasting volcanic tremor signals. Separating transient events from volcanic tremors can, therefore, contrib-ute to improving upon our understanding of the underlying physical processes. Exploiting the idea of harmonic-percussive separation in musical signal processing, we develop a method to extract the harmonic volcanic tremor signals and to detect tran-sient events from seismic recordings. Based on the similarity properties of spectrogram frames in the time-frequency domain, we decompose the signal into two separate spec-trograms representing repeating (harmonic) and nonrepeating (transient) patterns, which correspond to volcanic tremor signals and earthquake signals, respectively. We reconstruct the harmonic tremor signal in the time domain from the complex spectrogram of the repeating pattern by only considering the phase components for the frequency range in which the tremor amplitude spectrum is significantly contribut-ing to the energy of the signal. The reconstructed signal is, therefore, clean tremor signal without transient events. Furthermore, we derive a characteristic function suitable for the detection of tran-sient events (e.g., earthquakes) by integrating amplitudes of the nonrepeating spectro-gram over frequency at each time frame. Considering transient events like earthquakes, 78\% of the events are detected for signal-to-noise ratio = 0.1 in our semisynthetic tests. In addition, we compared the number of detected earthquakes using our method for one month of continuous data recorded during the Holuhraun 2014-2015 eruption in Iceland with the bulletin presented in Agustsdottir et al. (2019). Our single station event detection algorithm identified 84\% of the bulletin events. Moreover, we detected a total of 12,619 events, which is more than twice the number of the bulletin events.}, language = {en} } @article{Scherbaum1997, author = {Scherbaum, Frank}, title = {Zero Phase FIR filters in digital seismic acquisition systems : blessing or curse}, year = {1997}, language = {en} }