@misc{WeberTiefenbacherGronau2019, author = {Weber, Edzard and Tiefenbacher, Anselm and Gronau, Norbert}, title = {Need for standardization and systematization of test data for job-shop scheduling}, series = {Postprints der Universit{\"a}t Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe}, number = {134}, issn = {1867-5808}, doi = {10.25932/publishup-47222}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472229}, pages = {23}, year = {2019}, abstract = {The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research. Keywords}, language = {en} } @article{WeberTiefenbacherGronau2019, author = {Weber, Edzard and Tiefenbacher, Anselm and Gronau, Norbert}, title = {Need for Standardization and Systematization of Test Data for Job-Shop Scheduling}, series = {Data}, volume = {4}, journal = {Data}, number = {1}, publisher = {MDPI}, address = {Basel}, issn = {2306-5729}, doi = {10.3390/data4010032}, pages = {21}, year = {2019}, abstract = {The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research.}, language = {en} } @article{WeberSteinGronau2009, author = {Weber, Edzard and Stein, Maureen and Gronau, Norbert}, title = {Demokratieorientierte eGovernment-Systeme}, isbn = {978-3-89864- 590-4}, year = {2009}, language = {de} } @article{WeberSteinGronau2009, author = {Weber, Edzard and Stein, Maureen and Gronau, Norbert}, title = {Demokratieorientierte eGovernment-Systeme}, issn = {1436 - 3011}, year = {2009}, language = {de} } @article{VladovaWotschackLareiroetal.2020, author = {Vladova, Gergana and Wotschack, Philip and Lareiro, Patricia de Paiva and Gronau, Norbert and Thim, Christof}, title = {Lernen mit Assistenzsystemen}, series = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, volume = {36}, journal = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, number = {3}, publisher = {GITO mbH Verlag}, address = {Berlin}, issn = {2364-9208}, doi = {10.30844/I40M_20-3_S16-20}, pages = {16 -- 20}, year = {2020}, abstract = {Der Beitrag beschreibt die Konzeption und Durchf{\"u}hrung und bietet einen Einblick in die ersten Ergebnisse einer Untersuchung mit experimentellem Design in einer simulierten Prozessumgebung im Forschungs- und Anwendungszentrum Industrie 4.0 in Potsdam. Im Mittelpunkt stehen Anlernprozesse im Bereich der Einfacharbeit (Helfert{\"a}tigkeiten) und ihre Gestaltung durch den Einsatz digitaler Assistenzsysteme. In der Arbeitsforschung finden sich Hinweise darauf, dass mit dem Einsatz dieser Systeme Prozesswissen verloren geht, im Sinne einer guten Kenntnis des gesamten Arbeitsprozesses, in den die einzelnen T{\"a}tigkeiten eingebettet sind. Das kann sich als Problem erweisen, vor allem wenn unvorhersehbare Situationen oder Fehler eintreten. Um die Rolle von Prozesswissen beim Einsatz von digitalen Assistenzsystemen zu untersuchen, wird im Experiment eine echte Fabriksituation simuliert. Die Probanden werden {\"u}ber ein Assistenzsystem Schritt f{\"u}r Schritt in ihre Aufgabent{\"a}tigkeit angelernt, einem Teil der Probanden wird allerdings am Anfang zus{\"a}tzlich Prozesswissen im Rahmen einer kurzen Schulung vermittelt.}, language = {de} } @incollection{VladovaUllrichBenderetal.2021, author = {Vladova, Gergana and Ullrich, Andr{\´e} and Bender, Benedict and Gronau, Norbert}, title = {Yes, we can (?)}, series = {Technology and innovation in learning, teaching and education : second international conference, TECH-EDU 2020, Vila Real, Portugal, December 2-4, 2020 : proceedings}, booktitle = {Technology and innovation in learning, teaching and education : second international conference, TECH-EDU 2020, Vila Real, Portugal, December 2-4, 2020 : proceedings}, editor = {Reis, Ars{\´e}nio and Barroso, Jo{\~a}o and Lopes, J. Bernardino and Mikropoulos, Tassos and Fan, Chih-Wen}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-73987-4}, doi = {10.1007/978-3-030-73988-1_17}, pages = {225 -- 235}, year = {2021}, abstract = {The COVID-19 crisis has caused an extreme situation for higher education institutions around the world, where exclusively virtual teaching and learning has become obligatory rather than an additional supporting feature. This has created opportunities to explore the potential and limitations of virtual learning formats. This paper presents four theses on virtual classroom teaching and learning that are discussed critically. We use existing theoretical insights extended by empirical evidence from a survey of more than 850 students on acceptance, expectations, and attitudes regarding the positive and negative aspects of virtual teaching. The survey responses were gathered from students at different universities during the first completely digital semester (Spring-Summer 2020) in Germany. We discuss similarities and differences between the subjects being studied and highlight the advantages and disadvantages of virtual teaching and learning. Against the background of existing theory and the gathered data, we emphasize the importance of social interaction, the combination of different learning formats, and thus context-sensitive hybrid learning as the learning form of the future.}, language = {en} } @misc{VladovaUllrichBenderetal.2021, author = {Vladova, Gergana and Ullrich, Andr{\´e} and Bender, Benedict and Gronau, Norbert}, title = {Students' Acceptance of Technology-Mediated Teaching - How It Was Influenced During the COVID-19 Pandemic in 2020: A Study From Germany}, series = {Postprints der Universit{\"a}t Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe}, issn = {1867-5808}, doi = {10.25932/publishup-52161}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-521615}, pages = {17}, year = {2021}, abstract = {In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring-summer 2020 semester. Our study focused on (1) the students' acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study's results and derive short- and long-term implications for science and practice.}, language = {en} } @article{VladovaUllrichBenderetal.2021, author = {Vladova, Gergana and Ullrich, Andr{\´e} and Bender, Benedict and Gronau, Norbert}, title = {Students' acceptance of technology-mediated teaching - How it was influenced during the COVID-19 Pandemic in 2020}, series = {Frontiers in psychology / Frontiers Research Foundation}, volume = {12}, journal = {Frontiers in psychology / Frontiers Research Foundation}, publisher = {Frontiers Research Foundation}, address = {Lausanne}, issn = {1664-1078}, doi = {10.3389/fpsyg.2021.636086}, pages = {15}, year = {2021}, abstract = {In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring-summer 2020 semester. Our study focused on (1) the students' acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study's results and derive short- and long-term implications for science and practice.}, language = {en} } @incollection{VladovaGronauRuedian2019, author = {Vladova, Gergana and Gronau, Norbert and R{\"u}dian, Sylvio Leo}, title = {Wissenstransfer in Bildung und Weiterbildung}, series = {Digitale Transformation - gutes Arbeiten und Qualifizierung aktiv gestalten}, booktitle = {Digitale Transformation - gutes Arbeiten und Qualifizierung aktiv gestalten}, publisher = {Gito}, address = {Berlin}, isbn = {978-3-95545-309-1}, pages = {89 -- 106}, year = {2019}, language = {de} } @article{VladovaGronau2022, author = {Vladova, Gergana and Gronau, Norbert}, title = {KI-basierte Assistenzsysteme in betrieblichen Lernprozessen}, series = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, volume = {38}, journal = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, number = {2}, publisher = {GITO mbH Verlag f{\"u}r Industrielle Informationstechnik und Organisation}, address = {Berlin}, issn = {2364-9216}, doi = {10.30844/I40M_22-2_11-14}, pages = {11 -- 14}, year = {2022}, abstract = {Assistenzsysteme finden im Kontext der digitalen Transformation immer mehr Einsatz. Sie k{\"o}nnen Besch{\"a}ftigte in industriellen Produktionsprozessen sowohl in der Anlern- als auch in der aktiven Arbeitsphase unterst{\"u}tzen. Kompetenzen k{\"o}nnen so arbeitsplatz- und prozessnah sowie bedarfsorientiert aufgebaut werden. In diesem Beitrag wird der aktuelle Forschungsstand zu den Einsatzm{\"o}glichkeiten dieser Assistenzsysteme diskutiert und mit Beispielen illustriert. Es werden unter anderem auch Herausforderungen f{\"u}r den Einsatz aufgezeigt. Am Ende des Beitrags werden Potenziale f{\"u}r die zuk{\"u}nftige Nutzung von AS in industriellen Lernprozessen und f{\"u}r die Forschung identifiziert.}, language = {de} } @article{UllrichWeberGronau2023, author = {Ullrich, Andr{\´e} and Weber, Edzard and Gronau, Norbert}, title = {Regionale Refabrikationsnetzwerke}, series = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, volume = {39}, journal = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, number = {2}, publisher = {GITO mbH Verlag}, address = {Berlin}, issn = {2364-9208}, doi = {10.30844/IM_23-2_11-14}, pages = {11 -- 14}, year = {2023}, abstract = {Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivit{\"a}ten, um zu einem nachhaltigen Umgang mit den zur Verf{\"u}gung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es erm{\"o}glicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu f{\"o}rdern und effiziente L{\"o}sungen f{\"u}r die regionale Wieder- und Weiterverwendung von G{\"u}tern anzubieten.}, language = {de} } @misc{UllrichWeberGronau2023, author = {Ullrich, Andr{\´e} and Weber, Edzard and Gronau, Norbert}, title = {Regionale Refabrikationsnetzwerke}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, number = {2}, issn = {2364-9208}, doi = {10.25932/publishup-60451}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-604510}, pages = {6}, year = {2023}, abstract = {Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivit{\"a}ten, um zu einem nachhaltigen Umgang mit den zur Verf{\"u}gung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es erm{\"o}glicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu f{\"o}rdern und effiziente L{\"o}sungen f{\"u}r die regionale Wieder- und Weiterverwendung von G{\"u}tern anzubieten.}, language = {de} } @article{UllrichVladovaMarquartetal.2022, author = {Ullrich, Andr{\´e} and Vladova, Gergana and Marquart, Danny and Braun, Andreas and Gronau, Norbert}, title = {An overwiew of benefits and risks in open innovation projects and the influence of intermediary participation, decision-making authority, experience, and position on their perception}, series = {International journal of innovation management : IJIM}, volume = {26}, journal = {International journal of innovation management : IJIM}, number = {02}, publisher = {World Scientific Publ.}, address = {Singapore}, issn = {1363-9196}, doi = {10.1142/S1363919622500128}, pages = {41}, year = {2022}, abstract = {This paper presents an exploratory study investigating the influence of the factors (1) intermediary participation, (2) decision-making authority, (3) position in the enterprise, and (4) experience in open innovation on the perception and assessment of the benefits and risks expected from participating in open innovation projects. For this purpose, an online survey was conducted in Germany, Austria and Switzerland. The result of this paper is an empirical evidence showing whether and how these factors affect the perception of potential benefits and risks expected within the context of open innovation project participation. Furthermore, the identified effects are discussed against the theory. Existing theory regarding the benefits and risks of open innovation is expanded by (1) finding that they are perceived mostly independently of the factors, (2) confirming the practical relevance of benefits and risks, and (3) enabling a finer distinction between their degrees of relevance according to respective contextual specifics.}, language = {en} } @article{UllrichTeichmannGronau2021, author = {Ullrich, Andr{\´e} and Teichmann, Malte and Gronau, Norbert}, title = {Fast trainable capabilities in software engineering-skill development in learning factories}, series = {Ji suan ji jiao yu = Computer Education / Qing hua da xue}, journal = {Ji suan ji jiao yu = Computer Education / Qing hua da xue}, number = {12}, publisher = {[Verlag nicht ermittelbar]}, address = {Bei jing shi}, issn = {1672-5913}, doi = {10.16512/j.cnki.jsjjy.2020.12.002}, pages = {2 -- 10}, year = {2021}, abstract = {The increasing demand for software engineers cannot completely be fulfilled by university education and conventional training approaches due to limited capacities. Accordingly, an alternative approach is necessary where potential software engineers are being educated in software engineering skills using new methods. We suggest micro tasks combined with theoretical lessons to overcome existing skill deficits and acquire fast trainable capabilities. This paper addresses the gap between demand and supply of software engineers by introducing an actionoriented and scenario-based didactical approach, which enables non-computer scientists to code. Therein, the learning content is provided in small tasks and embedded in learning factory scenarios. Therefore, different requirements for software engineers from the market side and from an academic viewpoint are analyzed and synthesized into an integrated, yet condensed skills catalogue. This enables the development of training and education units that focus on the most important skills demanded on the market. To achieve this objective, individual learning scenarios are developed. Of course, proper basic skills in coding cannot be learned over night but software programming is also no sorcery.}, language = {en} } @article{UllrichGronau2020, author = {Ullrich, Andr{\´e} and Gronau, Norbert}, title = {Bestimmung nachhaltiger Anwendungssystemarchitekturen}, series = {ERP-Management : Auswahl, Einf{\"u}hrung und Betrieb von ERP-Systemen}, volume = {16}, journal = {ERP-Management : Auswahl, Einf{\"u}hrung und Betrieb von ERP-Systemen}, number = {1}, publisher = {GITO mbH}, address = {Berlin}, issn = {1860-6725}, doi = {10.30844/ERP_20-1_54-57}, pages = {54 -- 57}, year = {2020}, abstract = {Die teilweise sehr kurzfristig notwendige Reaktion auf Ver{\"a}nderungen erfordert von Unternehmen ein hohes Maß an Flexibilit{\"a}t und Reaktionsgeschwindigkeit. Anwendungssystemarchitekturen, die im Wesentlichen aus alten und selbst entwickelten Systemen bestehen, erf{\"u}llen h{\"a}ufig diese Anforderungen nicht. Investitionsmittel f{\"u}r neue Software sind jedoch begrenzt, daher m{\"u}ssen Priorit{\"a}ten in der Abl{\"o}sung von Altsystemen gesetzt werden. Eine effiziente Analysemethode zur Planung der Erneuerung der Anwendungssystemlandschaft stellt die Wandlungsf{\"a}higkeitsanalyse dar. Dieser Beitrag beschreibt Vorgehen und Ergebnisse am Beispiel eines international t{\"a}tigen Automobilzulieferers.}, language = {de} } @incollection{UllrichGronau2020, author = {Ullrich, Andr{\´e} and Gronau, Norbert}, title = {Time to change}, series = {Proceedings of the International Conference on Innovative Intelligent Industrial Production and Logistics}, booktitle = {Proceedings of the International Conference on Innovative Intelligent Industrial Production and Logistics}, editor = {Panetto, Herv{\´e} and Madani, Kurosh and Smirnov, Alexander}, publisher = {SciTePress}, address = {[Erscheinungsort nicht ermittelbar]}, isbn = {978-989-758-476-3}, doi = {10.5220/0010148601090116}, pages = {109 -- 116}, year = {2020}, abstract = {Industry 4.0 leads to a radical change that is progressing incrementally. The new information and communication technologies provide many conceivable opportunities for their application in the context of sustainable corporate management. The combination of new digital technologies with the ecological and social goals of companies offers a multitude of unimagined potentials and challenges. Although companies already see the need for action, there was in the past and currently still is a lack of concrete measures that lever the potential of Industry 4.0 for sustainability management. During the course of this position paper we develop six theses (two from each sustainability perspective) against the background of the current situation in research and practice, and policy.}, language = {en} } @misc{UllrichEnkeTeichmannetal.2019, author = {Ullrich, Andre and Enke, Judith and Teichmann, Malte and Kress, Antonio and Gronau, Norbert}, title = {Audit - and then what?}, series = {Procedia Manufacturing}, volume = {31}, journal = {Procedia Manufacturing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2351-9789}, doi = {10.1016/j.promfg.2019.03.025}, pages = {162 -- 168}, year = {2019}, abstract = {Current trends such as digital transformation, Internet of Things, or Industry 4.0 are challenging the majority of learning factories. Regardless of whether a conventional learning factory, a model factory, or a digital learning factory, traditional approaches such as the monotonous execution of specific instructions don't suffice the learner's needs, market requirements as well as especially current technological developments. Contemporary teaching environments need a clear strategy, a road to follow for being able to successfully cope with the changes and develop towards digitized learning factories. This demand driven necessity of transformation leads to another obstacle: Assessing the status quo and developing and implementing adequate action plans. Within this paper, details of a maturity-based audit of the hybrid learning factory in the Research and Application Centre Industry 4.0 and a thereof derived roadmap for the digitization of a learning factory are presented.}, language = {en} } @article{ThimUllrichGronau2020, author = {Thim, Christof and Ullrich, Andr{\´e} and Gronau, Norbert}, title = {Process model driven learning scenario implementation}, series = {Procedia manufacturing}, volume = {45}, journal = {Procedia manufacturing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.071}, pages = {522 -- 527}, year = {2020}, abstract = {The implementation of learning scenarios is a diversely challenging, frequently purely manual and effortful undertaking. In this contribution a process based view is used in scenario generation to overcome communication, coordination and technical gaps. A framework is provided to identify, define and integrate technological artefacts and learning content as modular, reusable building blocks along a modeled production process. The specific contribution is twofold: 1) the theoretical framework represents a unique basis for modularization of content and technology in order to enhance reusability, 2) the model based scenario definition is a starting point for automated implementation of learning scenarios in industrial learning environments that has not been created before.}, language = {en} } @article{ThimUllrichEigelshovenetal.2020, author = {Thim, Christof and Ullrich, Andr{\´e} and Eigelshoven, Felix and Gronau, Norbert and Ritter, Ann-Carolin}, title = {Crowdsourcing bei industriellen Innovationen}, series = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, volume = {36}, journal = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, number = {6}, publisher = {GITO mbH Verlag}, address = {Berlin}, issn = {2364-9208}, doi = {10.30844/I40M_20-6_S9-13}, pages = {9 -- 13}, year = {2020}, abstract = {Die Innovationst{\"a}tigkeit im industriellen Umfeld verlagert sich durch die Digitalisierung hin zu Produkt-Service-Systemen. Kleine und mittlere Unternehmen haben sich in ihrer Entwicklungst{\"a}tigkeit bisher stark auf die Produktentwicklung bezogen. Der Umstieg auf „smarte" Produkte und die Kopplung an Dienstleistungen erfordert h{\"a}ufig personelle und finanzielle Ressourcen, welche KMU nicht aufbringen k{\"o}nnen. Crowdsourcing stellt eine M{\"o}glichkeit dar, den Innovationsprozess f{\"u}r externe Akteure zu {\"o}ffnen und Kosten- sowie Geschwindigkeitsvorteile zu realisieren. Bei der Integration von Crowdsourcing-Elementen ist jedoch einigen Herausforderungen zu begegnen. Dieser Beitrag zeigt sowohl die Potenziale als auch die Barrieren einer Crowdsourcing-Nutzung im industriellen Umfeld auf.}, language = {de} } @incollection{ThimGrumSchueffleretal.2021, author = {Thim, Christof and Grum, Marcus and Sch{\"u}ffler, Arnulf and Roling, Wiebke and Kluge, Annette and Gronau, Norbert}, title = {A concept for a distributed Interchangeable knowledge base in CPPS}, series = {Towards sustainable customization: cridging smart products and manufacturing systems}, booktitle = {Towards sustainable customization: cridging smart products and manufacturing systems}, editor = {Andersen, Ann-Louise and Andersen, Rasmus and Brunoe, Thomas Ditlev and Larsen, Maria Stoettrup Schioenning and Nielsen, Kjeld and Napoleone, Alessia and Kjeldgaard, Stefan}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-90699-3}, doi = {10.1007/978-3-030-90700-6_35}, pages = {314 -- 321}, year = {2021}, abstract = {As AI technology is increasingly used in production systems, different approaches have emerged from highly decentralized small-scale AI at the edge level to centralized, cloud-based services used for higher-order optimizations. Each direction has disadvantages ranging from the lack of computational power at the edge level to the reliance on stable network connections with the centralized approach. Thus, a hybrid approach with centralized and decentralized components that possess specific abilities and interact is preferred. However, the distribution of AI capabilities leads to problems in self-adapting learning systems, as knowledgebases can diverge when no central coordination is present. Edge components will specialize in distinctive patterns (overlearn), which hampers their adaptability for different cases. Therefore, this paper aims to present a concept for a distributed interchangeable knowledge base in CPPS. The approach is based on various AI components and concepts for each participating node. A service-oriented infrastructure allows a decentralized, loosely coupled architecture of the CPPS. By exchanging knowledge bases between nodes, the overall system should become more adaptive, as each node can "forget" their present specialization.}, language = {en} } @book{ThimGronauRoechertVoigtetal.2012, author = {Thim, Christof and Gronau, Norbert and R{\"o}chert-Voigt, Tanja and Proske, Niels and Heine, Moreen}, title = {Organisation des Schutzes der kritischen Infrastruktur Wasserversorgung}, publisher = {Gito Verlag GmbH}, address = {Berlin}, isbn = {978-3-942183-78-9}, pages = {16}, year = {2012}, abstract = {Die Erf{\"u}llung sicherheitsrelevanter Aufgaben, gerade im Bereich der Wasserversorgung, erfolgt immer vor dem Hintergrund des Schutzes der Kritischen Infrastruktur selbst und eines effektiven Bev{\"o}lkerungsschutzes. Daher erfordert die Organisation des Schutzes eine {\"u}ber die betriebsbezogene Sichtweise hinausgehende {\"u}berorganisatorische Betrachtung im Gesamtkontext zunehmender Verflechtung und Abh{\"a}ngigkeiten der Organisationen. Die vorliegende Brosch{\"u}re richtet sich daher insbesondere an kleine und mittlere Betreiber Kritischer Infrastrukturen, insbesondere im Bereich der Wasserversorgung. Diese sollen in die Lage versetzt werden, eine anforderungsgerechte, skalierbare und vor allem ressourceneffiziente Schutzkonzepterstellung durchf{\"u}hren zu k{\"o}nnen.}, language = {de} } @incollection{ThimGronauHaaseetal.2023, author = {Thim, Christof and Gronau, Norbert and Haase, Jennifer and Grum, Marcus and Sch{\"u}ffler, Arnulf and Roling, Wiebke and Kluge, Annette}, title = {Modeling change in business processes}, series = {Business modeling and software design}, booktitle = {Business modeling and software design}, editor = {Shishkov, Boris}, publisher = {Springer Nature}, address = {Cham}, isbn = {978-3-031-36756-4}, doi = {10.1007/978-3-031-36757-1_1}, pages = {3 -- 17}, year = {2023}, abstract = {Business processes are regularly modified either to capture requirements from the organization's environment or due to internal optimization and restructuring. Implementing the changes into the individual work routines is aided by change management tools. These tools aim at the acceptance of the process by and empowerment of the process executor. They cover a wide range of general factors and seldom accurately address the changes in task execution and sequence. Furthermore, change is only framed as a learning activity, while most obstacles to change arise from the inability to unlearn or forget behavioural patterns one is acquainted with. Therefore, this paper aims to develop and demonstrate a notation to capture changes in business processes and identify elements that are likely to present obstacles during change. It connects existing research from changes in work routines and psychological insights from unlearning and intentional forgetting to the BPM domain. The results contribute to more transparency in business process models regarding knowledge changes. They provide better means to understand the dynamics and barriers of change processes.}, language = {en} } @article{TeichmannVladovaGronau2023, author = {Teichmann, Malte and Vladova, Gergana and Gronau, Norbert}, title = {Conception of subject-oriented learning}, series = {SSRN eLibrary / Social Science Research Network}, journal = {SSRN eLibrary / Social Science Research Network}, publisher = {Social Science Electronic Publ.}, address = {[Erscheinungsort nicht ermittelbar]}, issn = {1556-5068}, doi = {10.2139/ssrn.4457995}, pages = {6}, year = {2023}, abstract = {Competence development must change at all didactic levels to meet the new requirements triggered by digitization. Unlike classic learning theories and the resulting popular approaches (e.g., sender-receiver model), future-oriented vocational training must include new learning theory impulses in the discussion about competence acquisition. On the one hand, these impulses are often very well elaborated on the theoretical side, but the transfer into innovative learning environments - such as learning factories - is often still missing. On the other hand, actual learning factory (design) approaches often concentrate primarily on the technical side. Subject-oriented learning theory enables the design of competence development-oriented vocational training projectsin learning factories in which persons can obtain relevant competencies for digitization. At the same time, such learning theory approaches assume a potentially infinite number of learning interests and reasons. Following this, competence development is always located in an institutional or organizational context. The paper conceptionally answers how this theoryimmanent challenge is synthesizable with the reality of organizationally competence development requirements.}, language = {en} } @article{TeichmannUllrichWenzetal.2020, author = {Teichmann, Malte and Ullrich, Andr{\´e} and Wenz, Julian and Gronau, Norbert}, title = {Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung}, series = {HMD Praxis der Wirtschaftsinformatik}, volume = {57}, journal = {HMD Praxis der Wirtschaftsinformatik}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {1436-3011}, doi = {10.1365/s40702-020-00614-x}, pages = {512 -- 527}, year = {2020}, abstract = {Die Digitalisierung von Produktionsprozessen schreitet mit einer hohen Intensit{\"a}t voran. Weiterbildung hat eine hohe Relevanz f{\"u}r betriebliche Transformationsprozesse. Die betriebliche Weiterbildungspraxis ist den aktuellen Herausforderungen der Digitalisierung jedoch nicht gewachsen. Herausforderungen sind Kompetenzl{\"u}cken der Mitarbeiter, ungewisse Anforderungsprofile und T{\"a}tigkeitstypen, demographischer Wandel sowie veraltete didaktische Ans{\"a}tze. Zudem wird bestehender inhaltlicher und p{\"a}dagogischer Freiraum bei der Gestaltung von Weiterbildung oftmals nur unzureichend ausgenutzt. Die skizzierte Situation f{\"u}hrt dazu, dass der Mehrwert gegenw{\"a}rtiger Qualifizierungsangebote sowohl f{\"u}r Unternehmen als auch Besch{\"a}ftigte nicht ausgesch{\"o}pft wird. Ausgehend von Ver{\"a}nderungen durch Digitalisierung in der Produktion und deren Auswirkungen auf die Kompetenzentwicklung diskutiert dieser Beitrag Herausforderungen gegenw{\"a}rtiger betrieblicher Weiterbildung. Er leitet Handlungsempfehlungen ab, die mithilfe von Beispielen gewerkschaftlich unterst{\"u}tzter Weiterbildungspraxis illustriert werden. Im Ergebnis erhalten Interessierte einen {\"U}berblick {\"u}ber gegenw{\"a}rtige Herausforderungen und Handlungsempfehlungen f{\"u}r die Gestaltung und Durchf{\"u}hrung von Weiterbildung in Zeiten der Digitalisierung.}, language = {de} } @article{TeichmannUllrichKotarskietal.2021, author = {Teichmann, Malte and Ullrich, Andr{\´e} and Kotarski, David and Gronau, Norbert}, title = {Facing the demographic change}, series = {SSRN eLibrary / Social Science Research Network}, journal = {SSRN eLibrary / Social Science Research Network}, publisher = {Social Science Electronic Publ.}, address = {[Erscheinungsort nicht ermittelbar]}, issn = {1556-5068}, doi = {10.2139/ssrn.3858716}, pages = {6}, year = {2021}, abstract = {Digitization and demographic change are enormous challenges for companies. Learning factories as innovative learning places can help prepare older employees for the digital change but must be designed and configured based on their specific learning requirements. To date, however, there are no particular recommendations to ensure effective age-appropriate training of bluecollar workers in learning factories. Therefore, based on a literature review, design characteristics and attributes of learning factories and learning requirements of older employees are presented. Furthermore, didactical recommendations for realizing age-appropriate learning designs in learning factories and a conceptualized scenario are outlined by synthesizing the findings.}, language = {en} } @article{TeichmannUllrichKnostetal.2020, author = {Teichmann, Malte and Ullrich, Andr{\´e} and Knost, Dennis and Gronau, Norbert}, title = {Serious games in learning factories}, series = {Procedia manufacturing}, volume = {45}, journal = {Procedia manufacturing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.104}, pages = {259 -- 264}, year = {2020}, abstract = {The usage of gamification in the contexts of commerce, consumption, innovation or eLearning in schools and universities has been extensively researched. However, the potentials of serious games to transfer and perpetuate knowledge and action patterns in learning factories have not been levered so far. The goal of this paper is to introduce a serious game as an instrument for knowledge transfer and perpetuation. Therefore, reqirements towards serious games in the context of learning factories are pointed out. As a result, that builds on these requirements, a serious learning game for the topic of Industry 4.0 is practically designed and evaluated.}, language = {en} } @article{TeichmannUllrichBenderetal.2018, author = {Teichmann, Malte and Ullrich, Andr{\´e} and Bender, Benedict and Gronau, Norbert}, title = {Mobile IIoT-Technologien in hybriden Lernfabriken}, series = {Industrie 4.0 Management}, volume = {34}, journal = {Industrie 4.0 Management}, number = {3}, publisher = {GITO}, address = {Berlin}, issn = {2364-9208}, doi = {10.30844/I40M_18-3_S21-24}, pages = {21 -- 24}, year = {2018}, abstract = {Der Wandel zur automatisierten Produktion, die fortschreitende Digitalisierung der Wertsch{\"o}pfungsprozesse sowie die stetige Implementierung von mobilen Industrial Internet of Things-Technologien (IIoT) in diese zur Unterst{\"u}tzung der Mitarbeiter stellen betriebliche Weiterbildung vor Herausforderungen. Komple-xere Anforderungen und ver{\"a}nderte T{\"a}tigkeitsprofile erfordern Handlungskom-petenzen bei Mitarbeitern im Sinne der F{\"a}higkeit, in unbekannten Situationen auf Basis eigenen K{\"o}nnens handlungsf{\"a}hig zu bleiben. Jene sowie daf{\"u}r notwendiges umfassendes Verst{\"a}ndnis gegen{\"u}ber digitalisierten Produktions-prozessen kann jedoch durch konventionelle Lehrmethoden nicht realisiert werden, da diese der erh{\"o}hten Anforderungskomplexit{\"a}t und den komplexen R{\"u}ckkopplungen im Rahmen der Steuer- und Regelkreise nicht gerecht werden k{\"o}nnen. Diese Aspekte aufgreifend wird im Folgenden ein szenariobasierter Wei-terbildungsansatz f{\"u}r eine Lernfabrik vorgestellt, der insbesondere die Potenziale mobiler IIoT-Technologien zur Ausgestaltung dieser in den Blick nimmt.}, language = {de} } @misc{TeichmannUllrichGronau2019, author = {Teichmann, Malte and Ullrich, Andre and Gronau, Norbert}, title = {Subject-oriented learning}, series = {Procedia Manufacturing}, volume = {31}, journal = {Procedia Manufacturing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2351-9789}, doi = {10.1016/j.promfg.2019.03.012}, pages = {72 -- 78}, year = {2019}, abstract = {The transformation to a digitized company changes not only the work but also social context for the employees and requires inter alia new knowledge and skills from them. Additionally, individual action problems arise. This contribution proposes the subject-oriented learning theory, in which the employees´ action problems are the starting point of training activities in learning factories. In this contribution, the subject-oriented learning theory is exemplified and respective advantages for vocational training in learning factories are pointed out both theoretically and practically. Thereby, especially the individual action problems of learners and the infrastructure are emphasized as starting point for learning processes and competence development.}, language = {en} } @incollection{TeichmannLassUllrichetal.2022, author = {Teichmann, Malte and Lass, Sander and Ullrich, Andr{\´e} and Gronau, Norbert}, title = {Modellfabriken als Enabler flexibler Lehr- und Lernsituationen f{\"u}r die Kompetenzentwicklung im Fabrikkontext}, series = {Faktor Mensch}, booktitle = {Faktor Mensch}, editor = {Weber, Kristin and Reinheimer, Stefan}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-34523-5}, doi = {10.1007/978-3-658-34524-2_10}, pages = {173 -- 196}, year = {2022}, abstract = {Dieses Kapitel diskutiert die Notwendigkeit einer st{\"a}rkeren Praxisorientierung f{\"u}r die Schaffung konkreter Lehr- und Lernr{\"a}ume in Unternehmen und zeigt die Vorteile einer Lernfabrik vor dem Hintergrund der stattfindenden Digitalisierung als Mittel zur Kompetenzentwicklung auf. Die technologiebedingt erweiterten Weiterbildungsziele erfordern die Nutzung geeigneter Konzepte und L{\"o}sungen. Dahingehend erfolgt die zielorientierte Konkretisierung der Kreation geeigneter Lehr- und Lernsituationen. Die Darstellung der Nutzbarmachung einer Modellfabrik als Lernfabrik der betrieblichen Weiterbildungspraxis zeigt nicht nur eine L{\"o}sung f{\"u}r die intendierte Bereitstellung flexibler Lehr- und Lernsituationen, sondern liefert ebenso Handlungsempfehlungen und Best-Practices f{\"u}r die erfolgreiche Kompetenzentwicklung. Insbesondere Praktiker profitieren von der Darstellung der Lernfabrik: aus dieser k{\"o}nnen sowohl betriebliche Weiterbildner als auch Gesch{\"a}ftsverantwortliche Implikationen f{\"u}r die didaktische Transformation betrieblicher Arbeitsorte in betriebliche Lern-Orte ableiten. Die detaillierte Darstellung einer Tagesschulung zum Thema Auswirkungen von Industrie 4.0 auf die Arbeit der Mitarbeiter sowie Illustration eines Lernszenarios geben reale Einblicke, wie betriebliche Weiterbildung abseits von Lehr-Lern-Kurzschluss-orientierter Didaktik gelingt.}, language = {de} } @incollection{TeichmannBusseGonnermannetal.2023, author = {Teichmann, Malte and Busse, Jana and Gonnermann, Jana and Reimann, Daniela and Ritterbusch, Georg David and Langemeyer, Ines and Gronau, Norbert}, title = {Konzeption, Erstellung und Evaluation von VR-R{\"a}umen f{\"u}r die betriebliche Weiterbildung in KMU}, series = {Digitalisierung der Arbeitswelt im Mittelstand 3}, booktitle = {Digitalisierung der Arbeitswelt im Mittelstand 3}, editor = {Nitsch, Verena and Brandl, Christopher and H{\"a}ußling, Roger and Roth, Philip and Gries, Thomas and Schmenk, Bernhard}, publisher = {Springer Vieweg}, address = {Berlin}, isbn = {978-3-662-67023-1}, doi = {10.1007/978-3-662-67024-8_5}, pages = {155 -- 204}, year = {2023}, abstract = {Der Beitrag adressiert die Erstellung von Virtual-Reality gest{\"u}tzten (Lehr- und Lern-) R{\"a}umen f{\"u}r die betriebliche Weiterbildung im Rahmen eines Forschungsprojektes. Der damit verbundene Konzeptions- und Umsetzungsprozess ist mit verschiedenen Herausforderungen verbunden: einerseits ist Virtual-Reality ein vergleichsweise neues Lehr- und Lernmedium, womit wenig praktische Handreichungen zur praktischen Umsetzung existieren. Andererseits existieren theoretisch-konzeptionelle Ans{\"a}tze zur Gestaltung digitaler Lehr- und Lernarrangements, die jedoch 1) oft Gefahr laufen, an den realen Bed{\"u}rfnissen der Praxis „vorbei" zu gehen und 2) zumeist nicht konkret Virtual-Reality bzw. damit verbundene Lehr- und Lernumgebungen adressieren. In dieser Folge sind Best-Practice Beispiele basierend auf erfolgreichen Umsetzungsvorhaben, die nachfolgenden Projekten als „Wegweiser" dienen k{\"o}nnten, {\"a}ußerst rar. Der Beitrag setzt an dieser Stelle an: basierend auf zwei real existierenden betrieblichen Anwendungsf{\"a}llen aus den Bereichen Natursteinbearbeitung sowie Einzel- und Sondermaschinenbau werden Herausforderungen und L{\"o}sungswege des Erstellungsprozesses von Virtual-Reality gest{\"u}tzten (Lehr- und Lern-)R{\"a}umen beschrieben. Ebenfalls werden basierend auf den gemachten Projekterfahrungen Handlungsempfehlungen f{\"u}r die gelingende Konzeption, Umsetzung und Evaluation dieser R{\"a}ume formuliert. Betriebliche Besch{\"a}ftigte aus den Bereichen Aus- und Weiterbildung, Management oder Human Ressources, die in eigenen Projekten im Bereich Virtual Reality aktiv werden wollen, profitieren von den herausgestellten praktischen Handreichungen. Forschende Personen sollen Anregungen f{\"u}r weiterf{\"u}hrende Forschungsvorhaben erhalten.}, language = {de} } @article{SchuefflerThimHaaseetal.2019, author = {Sch{\"u}ffler, Arnulf and Thim, Christof and Haase, Jennifer and Gronau, Norbert and Kluge, Annette}, title = {Information processing in work environment 4.0 and the beneficial impact of intentional forgetting on change management}, series = {Zeitschrift f{\"u}r Arbeits- und Organisationspsychologie : german journal of work and organizational psychology}, volume = {64}, journal = {Zeitschrift f{\"u}r Arbeits- und Organisationspsychologie : german journal of work and organizational psychology}, number = {1}, publisher = {Hogrefe}, address = {G{\"o}ttingen}, issn = {0932-4089}, doi = {10.1026/0932-4089/a000307}, pages = {17 -- 29}, year = {2019}, abstract = {Industry 4.0, based on increasingly progressive digitalization, is a global phenomenon that affects every part of our work. The Internet of Things (IoT) is pushing the process of automation, culminating in the total autonomy of cyber-physical systems. This process is accompanied by a massive amount of data, information, and new dimensions of flexibility. As the amount of available data increases, their specific timeliness decreases. Mastering Industry 4.0 requires humans to master the new dimensions of information and to adapt to relevant ongoing changes. Intentional forgetting can make a difference in this context, as it discards nonprevailing information and actions in favor of prevailing ones. Intentional forgetting is the basis of any adaptation to change, as it ensures that nonprevailing memory items are not retrieved while prevailing ones are retained. This study presents a novel experimental approach that was introduced in a learning factory (the Research and Application Center Industry 4.0) to investigate intentional forgetting as it applies to production routines. In the first experiment (N = 18), in which the participants collectively performed 3046 routine related actions (t1 = 1402, t2 = 1644), the results showed that highly proceduralized actions were more difficult to forget than actions that were less well-learned. Additionally, we found that the quality of cues that trigger the execution of routine actions had no effect on the extent of intentional forgetting.}, language = {en} } @article{SchuefflerThimHaaseetal.2019, author = {Sch{\"u}ffler, Arnulf and Thim, Christof and Haase, Jennifer and Gronau, Norbert and Kluge, Annette}, title = {Willentliches Vergessen}, series = {Gruppe. Interaktion. Organisation. Zeitschrift f{\"u}r Angewandte Organisationspsychologie (GIO)}, volume = {50}, journal = {Gruppe. Interaktion. Organisation. Zeitschrift f{\"u}r Angewandte Organisationspsychologie (GIO)}, number = {2}, publisher = {Springer}, address = {Wiesbaden}, issn = {2366-6145}, doi = {10.1007/s11612-019-00466-0}, pages = {197 -- 209}, year = {2019}, abstract = {Dieser Beitrag im Journal Gruppe. Interaktion. Organisation. stellt dar, wie willentliches Vergessen die Anpassung an notwendige Ver{\"a}nderungen f{\"u}r Individuen, Gruppen und Organisationen verbessert und wie willentliches Vergessen bewusst und gezielt gestaltet werden kann. Damit Verhalten in Folge einer notwendigen Ver{\"a}nderung angepasst wird, reicht es nicht aus, dass Menschen wissen was zu tun ist, willens und in der Lage sind ihr Verhalten zu ver{\"a}ndern. Eine Ver{\"a}nderung gelingt nur dann, wenn nur noch das neue Verhalten zur Anwendung kommt und nicht mehr das Alte, wenn das alte Verhalten vergessen wird. Der notwendige Prozess des willentlichen Vergessens ist durch Entfernen von Hinweisreizen, die die Erinnerung des zu Vergessenden und durch Platzierung von Hinweisreizen, die die Aktivierung des Neuen ausl{\"o}sen, gestaltbar. Der vorliegende Beitrag stellt die f{\"o}rderliche Wirkung von Hinweisreizen auf willentliches Vergessen dar, stellt sie im Rahmen des Berichts einer experimentellen Studie unter Beweis und gibt praktische Implikationen, wie f{\"u}r Individuen, Gruppen und Organisationen willentliches Vergessen gestaltet werden kann.}, language = {de} } @article{ScholzReiterHamannGronauetal.2005, author = {Scholz-Reiter, Bernd and Hamann, Tilo and Gronau, Norbert and Bogen, Jane}, title = {Fallbasierte neuronale Produktionsregelung : Nutzung des Case-Based Reasoning zur Produktionsregelung mit neuronalen Netzen}, year = {2005}, abstract = {Die Autoren stellen einen Ansatz vor, mit dem das Erfahrungswissen {\"u}ber die Produktionsregelung mit k{\"u}nstlichen neuronalen Netzen so aufgearbeitet und strukturiert werden kann, dass mittels des fallbasierten Schließens f{\"u}r neue Produktionssituationen die geeigneten und entsprechend voreingestellten neuronalen Netze ausgew{\"a}hlt werden k{\"o}nnen. Aufbauend auf den so gewonnenen Ergebnissen wird ein fallbasiertes System entwickelt.}, language = {de} } @article{SchmidBogenGronau2005, author = {Schmid, Simone and Bogen, Jane and Gronau, Norbert}, title = {Aufbau einer Wissensorganisation f{\"u}r den Betrieb komplexer ERP-Systeme}, year = {2005}, abstract = {Im Beitrag wird dargestellt, wie der Einsatz von Wissensmanagementwerkzeugen einen wichtigen Beitrag zur Gestaltung eines erfolgreichen ERP-Betriebes leisten kann. Da diese Aufgabe einen hohen Anteil an wissensintensiven Prozessen aufweist, wird dazu eine Methode ben{\"o}tigt, welches die Prozesse strukturiert erfasst, durch die Modellierung analysiert und geeignete Maßnahmen des Wissensmanagements vorschl{\"a}gt. Die Methode KMDL® erm{\"o}glicht durch die Einf{\"u}hrung einer Wissensebene die Spezifikation, wann Wissen welchen Inhalts und in welcher Form im Prozess ben{\"o}tigt oder erzeugt wird. Dabei wird auch darauf eingegangen, wie durch die Anwendung der KMDL® der optimale Schulungsbedarf f{\"u}r ERP-Anwender ermittelt werden kann.}, language = {de} } @misc{SchmidAndresenGronau2005, author = {Schmid, Simone and Andresen, Katja and Gronau, Norbert}, title = {Optimierung werks{\"u}bergreifender Gesch{\"a}ftsprozesse am Beispiel der Automobilzuliefererindustrie}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6837}, year = {2005}, abstract = {Die Bedeutung der Zulieferer f{\"u}r die Automobilhersteller w{\"a}chst stetig, weil die Zulieferer immer st{\"a}rker in den gesamten Wertsch{\"o}pfungsprozess des Herstellers eingebunden werden und somit st{\"a}ndig Planung, Qualit{\"a}t und Logistikabl{\"a}ufe optimiert werden m{\"u}ssen. Betriebliche Anwendungen, wie Enterprise Resource Planning- (ERP-) oder Produktionsplanung- und -steuerungs-(PPS-) Systeme werden ben{\"o}tigt, um den st{\"o}rungsfreien und reibungslosen Ablauf der Gesch{\"a}ftsprozesse und damit die st{\"a}ndige Lieferf{\"a}higkeit gegen{\"u}ber dem Automobilhersteller zu garantieren [1]. Anhand eines Markt{\"u}berblicks werden in diesem Beitrag innovative Ans{\"a}tze, M{\"o}glichkeiten und Koordinationsmechanismen zur Unterst{\"u}tzung der Produktion in verteilten Standorten von aktuellen ERP-/PPS-Systemen vorgestellt.}, subject = {Enterprise-Resource-Planning}, language = {de} } @article{SchmidAndresenGronau2005, author = {Schmid, Simone and Andresen, Katja and Gronau, Norbert}, title = {Optimierung werks{\"u}bergreifender Gesch{\"a}ftsprozesse am Beispiel der Automobilzuliefererindustrie : Auswertung einer Marktstudie zu ERP-/PPS- Systemen}, year = {2005}, abstract = {Die Bedeutung der Zulieferer f{\"u}r die Automobilhersteller w{\"a}chst stetig, weil die Zulieferer immer st{\"a}rker in den gesamten Wertsch{\"o}pfungsprozess des Herstellers eingebunden werden und somit st{\"a}ndig Planung, Qualit{\"a}t und Logistikabl{\"a}ufe optimiert werden m{\"u}ssen. Betriebliche Anwendungen, wie Enterprise Resource Planning- (ERP-) oder Produktionsplanung- und -steuerungs- (PPS-) Systeme werden ben{\"o}tigt, um den st{\"o}rungsfreien und reibungslosen Ablauf der Gesch{\"a}ftsprozesse und damit die st{\"a}ndige Lieferf{\"a}higkeit gegen{\"u}ber dem Automobilhersteller zu garantieren [1]. Anhand eines Markt{\"u}berblicks werden in diesem Beitrag innovative Ans{\"a}tze, M{\"o}glichkeiten und Koordinationsmechanismen zur Unterst{\"u}tzung der Produktion in verteilten Standorten von aktuellen ERP-/PPS-Systemen vorgestellt.}, language = {de} } @article{RojahnWeberGronau2023, author = {Rojahn, Marcel and Weber, Edzard and Gronau, Norbert}, title = {Towards a standardization in scheduling models}, series = {International journal of industrial and systems engineering}, volume = {17}, journal = {International journal of industrial and systems engineering}, number = {6}, publisher = {Inderscience Enterprises}, address = {Gen{\`e}ve}, issn = {1748-5037}, pages = {401 -- 408}, year = {2023}, abstract = {Terminology is a critical instrument for each researcher. Different terminologies for the same research object may arise in different research communities. By this inconsistency, many synergistic effects get lost. Theories and models will be more understandable and reusable if a common terminology is applied. This paper examines the terminological (in)consistence for the research field of job-shop scheduling by a literature review. There is an enormous variety in the choice of terms and mathematical notation for the same concept. The comparability, reusability and combinability of scheduling methods is unnecessarily hampered by the arbitrary use of homonyms and synonyms. The acceptance in the community of used variables and notation forms is shown by means of a compliance quotient. This is proven by the evaluation of 240 scientific publications on planning methods.}, language = {en} } @inproceedings{RojahnGronau2023, author = {Rojahn, Marcel and Gronau, Norbert}, title = {Digital platform concepts for manufacturing companies}, series = {10th International Conference on Future Internet of Things and Cloud (FiCloud)}, booktitle = {10th International Conference on Future Internet of Things and Cloud (FiCloud)}, publisher = {IEEE}, address = {[Erscheinungsort nicht ermittelbar]}, isbn = {979-8-3503-1635-3}, doi = {10.1109/FiCloud58648.2023.00030}, pages = {149 -- 158}, year = {2023}, abstract = {Digital Platforms (DPs) has established themself in recent years as a central concept of the Information Technology Science. Due to the great diversity of digital platform concepts, clear definitions are still required. Furthermore, DPs are subject to dynamic changes from internal and external factors, which pose challenges for digital platform operators, developers and customers. Which current digital platform research directions should be taken to address these challenges remains open so far. The following paper aims to contribute to this by outlining a systematic literature review (SLR) on digital platform concepts in the context of the Industrial Internet of Things (IIoT) for manufacturing companies and provides a basis for (1) a selection of definitions of current digital platform and ecosystem concepts and (2) a selection of current digital platform research directions. These directions are diverted into (a) occurrence of digital platforms, (b) emergence of digital platforms, (c) evaluation of digital platforms, (d) development of digital platforms, and (e) selection of digital platforms.}, language = {en} } @inproceedings{RojahnGronau2024, author = {Rojahn, Marcel and Gronau, Norbert}, title = {Openness indicators for the evaluation of digital platforms between the launch and maturity phase}, series = {Proceedings of the 57th Annual Hawaii International Conference on System Sciences}, booktitle = {Proceedings of the 57th Annual Hawaii International Conference on System Sciences}, editor = {Bui, Tung X.}, publisher = {Department of IT Management Shidler College of Business University of Hawaii}, address = {Honolulu, HI}, isbn = {978-0-99813-317-1}, pages = {4516 -- 4525}, year = {2024}, abstract = {In recent years, the evaluation of digital platforms has become an important focus in the field of information systems science. The identification of influential indicators that drive changes in digital platforms, specifically those related to openness, is still an unresolved issue. This paper addresses the challenge of identifying measurable indicators and characterizing the transition from launch to maturity in digital platforms. It proposes a systematic analytical approach to identify relevant openness indicators for evaluation purposes. The main contributions of this study are the following (1) the development of a comprehensive procedure for analyzing indicators, (2) the categorization of indicators as evaluation metrics within a multidimensional grid-box model, (3) the selection and evaluation of relevant indicators, (4) the identification and assessment of digital platform architectures during the launch-to-maturity transition, and (5) the evaluation of the applicability of the conceptualization and design process for digital platform evaluation.}, language = {en} } @incollection{RojahnAmbrosBiruetal.2023, author = {Rojahn, Marcel and Ambros, Maximilian and Biru, Tibebu and Krallmann, Hermann and Gronau, Norbert and Grum, Marcus}, title = {Adequate basis for the data-driven and machine-learning-based identification}, series = {Artificial intelligence and soft computing}, booktitle = {Artificial intelligence and soft computing}, editor = {Rutkowski, Leszek and Scherer, Rafał and Korytkowski, Marcin and Pedrycz, Witold and Tadeusiewicz, Ryszard and Zurada, Jacek M.}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-42504-2}, doi = {10.1007/978-3-031-42505-9_48}, pages = {570 -- 588}, year = {2023}, abstract = {Process mining (PM) has established itself in recent years as a main method for visualizing and analyzing processes. However, the identification of knowledge has not been addressed adequately because PM aims solely at data-driven discovering, monitoring, and improving real-world processes from event logs available in various information systems. The following paper, therefore, outlines a novel systematic analysis view on tools for data-driven and machine learning (ML)-based identification of knowledge-intensive target processes. To support the effectiveness of the identification process, the main contributions of this study are (1) to design a procedure for a systematic review and analysis for the selection of relevant dimensions, (2) to identify different categories of dimensions as evaluation metrics to select source systems, algorithms, and tools for PM and ML as well as include them in a multi-dimensional grid box model, (3) to select and assess the most relevant dimensions of the model, (4) to identify and assess source systems, algorithms, and tools in order to find evidence for the selected dimensions, and (5) to assess the relevance and applicability of the conceptualization and design procedure for tool selection in data-driven and ML-based process mining research.}, language = {en} } @article{PanzerGronau2024, author = {Panzer, Marcel and Gronau, Norbert}, title = {Enhancing economic efficiency in modular production systems through deep reinforcement learning}, series = {Procedia CIRP}, volume = {121}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2023.09.229}, pages = {55 -- 60}, year = {2024}, abstract = {In times of increasingly complex production processes and volatile customer demands, the production adaptability is crucial for a company's profitability and competitiveness. The ability to cope with rapidly changing customer requirements and unexpected internal and external events guarantees robust and efficient production processes, requiring a dedicated control concept at the shop floor level. Yet in today's practice, conventional control approaches remain in use, which may not keep up with the dynamic behaviour due to their scenario-specific and rigid properties. To address this challenge, deep learning methods were increasingly deployed due to their optimization and scalability properties. However, these approaches were often tested in specific operational applications and focused on technical performance indicators such as order tardiness or total throughput. In this paper, we propose a deep reinforcement learning based production control to optimize combined techno-financial performance measures. Based on pre-defined manufacturing modules that are supplied and operated by multiple agents, positive effects were observed in terms of increased revenue and reduced penalties due to lower throughput times and fewer delayed products. The combined modular and multi-staged approach as well as the distributed decision-making further leverage scalability and transferability to other scenarios.}, language = {en} } @inproceedings{PanzerBenderGronau2021, author = {Panzer, Marcel and Bender, Benedict and Gronau, Norbert}, title = {Deep reinforcement learning in production planning and control}, series = {Proceedings of the Conference on Production Systems and Logistics}, booktitle = {Proceedings of the Conference on Production Systems and Logistics}, publisher = {publish-Ing.}, address = {Hannover}, issn = {2701-6277}, doi = {10.15488/11238}, pages = {535 -- 545}, year = {2021}, abstract = {Increasingly fast development cycles and individualized products pose major challenges for today's smart production systems in times of industry 4.0. The systems must be flexible and continuously adapt to changing conditions while still guaranteeing high throughputs and robustness against external disruptions. Deep rein- forcement learning (RL) algorithms, which already reached impressive success with Google DeepMind's AlphaGo, are increasingly transferred to production systems to meet related requirements. Unlike supervised and unsupervised machine learning techniques, deep RL algorithms learn based on recently collected sensor- and process-data in direct interaction with the environment and are able to perform decisions in real-time. As such, deep RL algorithms seem promising given their potential to provide decision support in complex environments, as production systems, and simultaneously adapt to changing circumstances. While different use-cases for deep RL emerged, a structured overview and integration of findings on their application are missing. To address this gap, this contribution provides a systematic literature review of existing deep RL applications in the field of production planning and control as well as production logistics. From a performance perspective, it became evident that deep RL can beat heuristics significantly in their overall performance and provides superior solutions to various industrial use-cases. Nevertheless, safety and reliability concerns must be overcome before the widespread use of deep RL is possible which presumes more intensive testing of deep RL in real world applications besides the already ongoing intensive simulations.}, language = {en} } @misc{PanzerBenderGronau2021, author = {Panzer, Marcel and Bender, Benedict and Gronau, Norbert}, title = {Deep reinforcement learning in production planning and control}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, issn = {2701-6277}, doi = {10.25932/publishup-60572}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-605722}, pages = {13}, year = {2021}, abstract = {Increasingly fast development cycles and individualized products pose major challenges for today's smart production systems in times of industry 4.0. The systems must be flexible and continuously adapt to changing conditions while still guaranteeing high throughputs and robustness against external disruptions. Deep reinforcement learning (RL) algorithms, which already reached impressive success with Google DeepMind's AlphaGo, are increasingly transferred to production systems to meet related requirements. Unlike supervised and unsupervised machine learning techniques, deep RL algorithms learn based on recently collected sensorand process-data in direct interaction with the environment and are able to perform decisions in real-time. As such, deep RL algorithms seem promising given their potential to provide decision support in complex environments, as production systems, and simultaneously adapt to changing circumstances. While different use-cases for deep RL emerged, a structured overview and integration of findings on their application are missing. To address this gap, this contribution provides a systematic literature review of existing deep RL applications in the field of production planning and control as well as production logistics. From a performance perspective, it became evident that deep RL can beat heuristics significantly in their overall performance and provides superior solutions to various industrial use-cases. Nevertheless, safety and reliability concerns must be overcome before the widespread use of deep RL is possible which presumes more intensive testing of deep RL in real world applications besides the already ongoing intensive simulations.}, language = {en} } @misc{PanzerBenderGronau2023, author = {Panzer, Marcel and Bender, Benedict and Gronau, Norbert}, title = {A deep reinforcement learning based hyper-heuristic for modular production control}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, issn = {1867-5808}, doi = {10.25932/publishup-60564}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-605642}, pages = {24}, year = {2023}, abstract = {In nowadays production, fluctuations in demand, shortening product life-cycles, and highly configurable products require an adaptive and robust control approach to maintain competitiveness. This approach must not only optimise desired production objectives but also cope with unforeseen machine failures, rush orders, and changes in short-term demand. Previous control approaches were often implemented using a single operations layer and a standalone deep learning approach, which may not adequately address the complex organisational demands of modern manufacturing systems. To address this challenge, we propose a hyper-heuristics control model within a semi-heterarchical production system, in which multiple manufacturing and distribution agents are spread across pre-defined modules. The agents employ a deep reinforcement learning algorithm to learn a policy for selecting low-level heuristics in a situation-specific manner, thereby leveraging system performance and adaptability. We tested our approach in simulation and transferred it to a hybrid production environment. By that, we were able to demonstrate its multi-objective optimisation capabilities compared to conventional approaches in terms of mean throughput time, tardiness, and processing of prioritised orders in a multi-layered production system. The modular design is promising in reducing the overall system complexity and facilitates a quick and seamless integration into other scenarios.}, language = {en} } @article{PanzerBenderGronau2023, author = {Panzer, Marcel and Bender, Benedict and Gronau, Norbert}, title = {A deep reinforcement learning based hyper-heuristic for modular production control}, series = {International journal of production research}, journal = {International journal of production research}, publisher = {Taylor \& Francis}, address = {London}, issn = {0020-7543}, doi = {10.1080/00207543.2023.2233641}, pages = {1 -- 22}, year = {2023}, abstract = {In nowadays production, fluctuations in demand, shortening product life-cycles, and highly configurable products require an adaptive and robust control approach to maintain competitiveness. This approach must not only optimise desired production objectives but also cope with unforeseen machine failures, rush orders, and changes in short-term demand. Previous control approaches were often implemented using a single operations layer and a standalone deep learning approach, which may not adequately address the complex organisational demands of modern manufacturing systems. To address this challenge, we propose a hyper-heuristics control model within a semi-heterarchical production system, in which multiple manufacturing and distribution agents are spread across pre-defined modules. The agents employ a deep reinforcement learning algorithm to learn a policy for selecting low-level heuristics in a situation-specific manner, thereby leveraging system performance and adaptability. We tested our approach in simulation and transferred it to a hybrid production environment. By that, we were able to demonstrate its multi-objective optimisation capabilities compared to conventional approaches in terms of mean throughput time, tardiness, and processing of prioritised orders in a multi-layered production system. The modular design is promising in reducing the overall system complexity and facilitates a quick and seamless integration into other scenarios.}, language = {en} } @misc{PanzerBenderGronau2022, author = {Panzer, Marcel and Bender, Benedict and Gronau, Norbert}, title = {Neural agent-based production planning and control}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, issn = {1867-5808}, doi = {10.25932/publishup-60477}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-604777}, pages = {26}, year = {2022}, abstract = {Nowadays, production planning and control must cope with mass customization, increased fluctuations in demand, and high competition pressures. Despite prevailing market risks, planning accuracy and increased adaptability in the event of disruptions or failures must be ensured, while simultaneously optimizing key process indicators. To manage that complex task, neural networks that can process large quantities of high-dimensional data in real time have been widely adopted in recent years. Although these are already extensively deployed in production systems, a systematic review of applications and implemented agent embeddings and architectures has not yet been conducted. The main contribution of this paper is to provide researchers and practitioners with an overview of applications and applied embeddings and to motivate further research in neural agent-based production. Findings indicate that neural agents are not only deployed in diverse applications, but are also increasingly implemented in multi-agent environments or in combination with conventional methods — leveraging performances compared to benchmarks and reducing dependence on human experience. This not only implies a more sophisticated focus on distributed production resources, but also broadening the perspective from a local to a global scale. Nevertheless, future research must further increase scalability and reproducibility to guarantee a simplified transfer of results to reality.}, language = {en} } @article{PanzerBenderGronau2022, author = {Panzer, Marcel and Bender, Benedict and Gronau, Norbert}, title = {Neural agent-based production planning and control}, series = {Journal of Manufacturing Systems}, volume = {65}, journal = {Journal of Manufacturing Systems}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0278-6125}, doi = {10.1016/j.jmsy.2022.10.019}, pages = {743 -- 766}, year = {2022}, abstract = {Nowadays, production planning and control must cope with mass customization, increased fluctuations in demand, and high competition pressures. Despite prevailing market risks, planning accuracy and increased adaptability in the event of disruptions or failures must be ensured, while simultaneously optimizing key process indicators. To manage that complex task, neural networks that can process large quantities of high-dimensional data in real time have been widely adopted in recent years. Although these are already extensively deployed in production systems, a systematic review of applications and implemented agent embeddings and architectures has not yet been conducted. The main contribution of this paper is to provide researchers and practitioners with an overview of applications and applied embeddings and to motivate further research in neural agent-based production. Findings indicate that neural agents are not only deployed in diverse applications, but are also increasingly implemented in multi-agent environments or in combination with conventional methods — leveraging performances compared to benchmarks and reducing dependence on human experience. This not only implies a more sophisticated focus on distributed production resources, but also broadening the perspective from a local to a global scale. Nevertheless, future research must further increase scalability and reproducibility to guarantee a simplified transfer of results to reality.}, language = {en} } @article{MuellerGronau2010, author = {M{\"u}ller, Claudia and Gronau, Norbert}, title = {Bildung von sozialen Netzwerken in Anwendungen der Social Software}, series = {Analyse sozialer Netzwerke und Social Software}, journal = {Analyse sozialer Netzwerke und Social Software}, publisher = {GITO}, address = {Berlin}, isbn = {978-3-940019-26-4}, pages = {1 -- 23}, year = {2010}, language = {de} } @article{MuellerBahrsGronau2005, author = {M{\"u}ller, Claudia and Bahrs, Julian and Gronau, Norbert}, title = {Evaluation of KMDL Models of Knowledge intensive Business Processes in the Area of Software Engineering}, year = {2005}, abstract = {Process oriented knowledge management focuses on knowledge intensive business processes. For modelling and analysis of these processes the modelling technique KMDL (Knowledge Modeling and Description Language) has been developed. KMDL is a method to describe knowledge flows and conversions along and between business processes. Thereby KMDL identifies existing and utilized information as well as knowledge of individual participants and of the entire company. This research-in-progress contribution introduces a practical example in the field of software engineering, in which KMDL models are evaluated to identify process improvements, e.g. by adding knowledge management activities. Therefore three individual views focussing on selected aspects of interest are introduced.}, language = {en} } @article{MuellerWeberGronau2006, author = {M{\"u}ller, C. and Weber, Edzard and Gronau, Norbert}, title = {Requirements for an integration of methods analyzing social issues in knowledge organizations}, year = {2006}, language = {en} } @article{LaemmerEggertGronau2008, author = {L{\"a}mmer, Anne and Eggert, Sandy and Gronau, Norbert}, title = {A procedure model for a SoA-based integration of enterprise systems}, issn = {1548-1115}, year = {2008}, language = {en} } @article{LindemannSchmidGronauetal.2006, author = {Lindemann, Marcus and Schmid, Simone and Gronau, Norbert and Schumacher, J.}, title = {Marktstudie zur kundenorientierten Weiterentwicklung von MES}, year = {2006}, language = {de} } @article{LindemannSchmidGronau2007, author = {Lindemann, Marcus and Schmid, Simone and Gronau, Norbert}, title = {Wirtschaftlichkeitsbewertung von Manufacturing Execution Systems}, year = {2007}, language = {de} } @article{LindemannGronau2007, author = {Lindemann, Marcus and Gronau, Norbert}, title = {RoI-Analyse f{\"u}r ERP-Systeme in Einzelfertigung und Anlagenbau}, year = {2007}, language = {de} } @article{LewandowskiUllrichGronau2021, author = {Lewandowski, Stefanie and Ullrich, Andr{\´e} and Gronau, Norbert}, title = {Normen zur Berechnung des CO₂-Fußabdrucks}, series = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, volume = {37}, journal = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse}, number = {4}, publisher = {GITO mbH Verlag}, address = {M{\"u}nchen}, issn = {2364-9208}, doi = {10.30844/I40M_21-4_S17-20}, pages = {17 -- 20}, year = {2021}, abstract = {CO₂-Fußabdr{\"u}cke sind ein aktuell viel diskutiertes Thema mit weitreichenden Implikationen f{\"u}r Individuen als auch Unternehmen. Firmen k{\"o}nnen einen proaktiven Beitrag zur Transparenz leisten, indem der unternehmens- oder produktbezogene CO₂-Fußabdruck ausgewiesen wird. Ist der Entschluss gefasst einen CO₂-Fußabdruck auszuweisen und die entstehenden Treibhausgase zu erfassen, existiert eine Vielzahl unterschiedlicher Normen und Zertifikate, wie die publicly available specification 2050, das Greenhouse Gas Protokoll oder die ISO 14067. Das Ziel dieses Beitrags ist es, diese drei Normen zur Berechnung des produktbezogenen CO₂-Fußabdrucks zu vergleichen, um Gemeinsamkeiten und Unterschiede sowie Vor- und Nachteile in der Anwendung aufzuzeigen. Die {\"U}bersicht soll Unternehmen bei der Entscheidungsfindung hinsichtlich der Eignung eines CO₂-Fußabdrucks f{\"u}r ihr Unternehmen unterst{\"u}tzen.}, language = {de} } @article{LassGronau2020, author = {Lass, Sander and Gronau, Norbert}, title = {A factory operating system for extending existing factories to Industry 4.0}, series = {Computers in industry : an international, application oriented research journal}, volume = {115}, journal = {Computers in industry : an international, application oriented research journal}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0166-3615}, doi = {10.1016/j.compind.2019.103128}, pages = {8}, year = {2020}, abstract = {Cyber-physical systems (CPS) have shaped the discussion about Industry 4.0 (I4.0) for some time. To ensure the competitiveness of manufacturing enterprises the vision for the future figures out cyber-physical production systems (CPPS) as a core component of a modern factory. Adaptability and coping with complexity are (among others) potentials of this new generation of production management. The successful transformation of this theoretical construct into practical implementation can only take place with regard to the conditions characterizing the context of a factory. The subject of this contribution is a concept that takes up the brownfield character and describes a solution for extending existing (legacy) systems with CPS capabilities.}, language = {en} } @incollection{LangemeyerGronauSchmidWalzetal.2021, author = {Langemeyer, Ines and Gronau, Norbert and Schmid-Walz, Sabrina and Kotarski, David and Reimann, Daniela and Teichmann, Malte}, title = {From employee to expert}, series = {2021 Crossing Boundaries Muttenz/Basel and Bern : 4th International VET Conference Crossing Boundaries 8 to 9 April 2021, online, Muttenz and Bern, Switzerland}, booktitle = {2021 Crossing Boundaries Muttenz/Basel and Bern : 4th International VET Conference Crossing Boundaries 8 to 9 April 2021, online, Muttenz and Bern, Switzerland}, doi = {10.5281/zenodo.4590196}, pages = {226 -- 231}, year = {2021}, abstract = {In the context of the collaborative project Ageing-appropriate, process-oriented and interactive further training in SME (API-KMU), innovative solutions for the challenges of demographic change and digitalisation are being developed for SMEs. To this end, an approach to age-appropriate training will be designed with the help of AR technology. In times of the corona pandemic, a special research design is necessary for the initial survey of the current state in the companies, which will be systematically elaborated in this paper. The results of the previous methodological considerations illustrate the necessity of a mix of methods to generate a deeper insight into the work processes. Video-based retrospective interviews seem to be a suitable instrument to adequately capture the employees' interpretative perspectives on their work activities. In conclusion, the paper identifies specific challenges, such as creating acceptance among employees, open questions, e.g., how a transfer or generalization of the results can succeed, and hypotheses that will have to be tested in the further course of the research process.}, language = {en} } @misc{KlugeGronau2018, author = {Kluge, Annette and Gronau, Norbert}, title = {Intentional forgetting in organizations}, series = {Frontiers in psychology}, volume = {9}, journal = {Frontiers in psychology}, publisher = {Frontiers Research Foundation}, address = {Lausanne}, issn = {1664-1078}, doi = {10.3389/fpsyg.2018.00051}, pages = {17}, year = {2018}, abstract = {To cope with the already large, and ever increasing, amount of information stored in organizational memory, "forgetting," as an important human memory process, might be transferred to the organizational context. Especially in intentionally planned change processes (e.g., change management), forgetting is an important precondition to impede the recall of obsolete routines and adapt to new strategic objectives accompanied by new organizational routines. We first comprehensively review the literature on the need for organizational forgetting and particularly on accidental vs. intentional forgetting. We discuss the current state of the art of theory and empirical evidence on forgetting from cognitive psychology in order to infer mechanisms applicable to the organizational context. In this respect, we emphasize retrieval theories and the relevance of retrieval cues important for forgetting. Subsequently, we transfer the empirical evidence that the elimination of retrieval cues leads to faster forgetting to the forgetting of organizational routines, as routines are part of organizational memory. We then propose a classification of cues (context, sensory, business process-related cues) that are relevant in the forgetting of routines, and discuss a meta-cue called the "situational strength" cue, which is relevant if cues of an old and a new routine are present simultaneously. Based on the classification as business process-related cues (information, team, task, object cues), we propose mechanisms to accelerate forgetting by eliminating specific cues based on the empirical and theoretical state of the art. We conclude that in intentional organizational change processes, the elimination of cues to accelerate forgetting should be used in change management practices.}, language = {en} } @misc{KlugeGronau2018, author = {Kluge, Annette and Gronau, Norbert}, title = {Intentional forgetting in organizations}, series = {Postprints der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe}, number = {127}, issn = {1867-5808}, doi = {10.25932/publishup-44602}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-446022}, pages = {19}, year = {2018}, abstract = {To cope with the already large, and ever increasing, amount of information stored in organizational memory, "forgetting," as an important human memory process, might be transferred to the organizational context. Especially in intentionally planned change processes (e.g., change management), forgetting is an important precondition to impede the recall of obsolete routines and adapt to new strategic objectives accompanied by new organizational routines. We first comprehensively review the literature on the need for organizational forgetting and particularly on accidental vs. intentional forgetting. We discuss the current state of the art of theory and empirical evidence on forgetting from cognitive psychology in order to infer mechanisms applicable to the organizational context. In this respect, we emphasize retrieval theories and the relevance of retrieval cues important for forgetting. Subsequently, we transfer the empirical evidence that the elimination of retrieval cues leads to faster forgetting to the forgetting of organizational routines, as routines are part of organizational memory. We then propose a classification of cues (context, sensory, business process-related cues) that are relevant in the forgetting of routines, and discuss a meta-cue called the "situational strength" cue, which is relevant if cues of an old and a new routine are present simultaneously. Based on the classification as business process-related cues (information, team, task, object cues), we propose mechanisms to accelerate forgetting by eliminating specific cues based on the empirical and theoretical state of the art. We conclude that in intentional organizational change processes, the elimination of cues to accelerate forgetting should be used in change management practices.}, language = {en} } @article{KlippertStolpmannGrumetal.2023, author = {Klippert, Monika and Stolpmann, Robert and Grum, Marcus and Thim, Christof and Gronau, Norbert and Albers, Albert}, title = {Knowledge transfer quality improvement}, series = {Procedia CIRP}, volume = {119}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2023.02.171}, pages = {919 -- 925}, year = {2023}, abstract = {Developing a new product generation requires the transfer of knowledge among various knowledge carriers. Several factors influence knowledge transfer, e.g., the complexity of engineering tasks or the competence of employees, which can decrease the efficiency and effectiveness of knowledge transfers in product engineering. Hence, improving those knowledge transfers obtains great potential, especially against the backdrop of experienced employees leaving the company due to retirement, so far, research results show, that the knowledge transfer velocity can be raised by following the Knowledge Transfer Velocity Model and implementing so-called interventions in a product engineering context. In most cases, the implemented interventions have a positive effect on knowledge transfer speed improvement. In addition to that, initial theoretical findings describe factors influencing the quality of knowledge transfers and outline a setting to empirically investigate how the quality can be improved by introducing a general description of knowledge transfer reference situations and principles to measure the quality of knowledge artifacts. To assess the quality of knowledge transfers in a product engineering context, the Knowledge Transfer Quality Model (KTQM) is created, which serves as a basis to develop and implement quality-dependent interventions for different knowledge transfer situations. As a result, this paper introduces the specifications of eight situation-adequate interventions to improve the quality of knowledge transfers in product engineering following an intervention template. Those interventions are intended to be implemented in an industrial setting to measure the quality of knowledge transfers and validate their effect.}, language = {en} } @article{HaaseHanelGronau2023, author = {Haase, Jennifer and Hanel, Paul H. P. and Gronau, Norbert}, title = {Creativity enhancement methods for adults}, series = {Psychology of aesthetics, creativity, and the arts}, journal = {Psychology of aesthetics, creativity, and the arts}, publisher = {American Psychological Association}, address = {Washington, DC}, issn = {1931-3896}, doi = {10.1037/aca0000557}, pages = {30}, year = {2023}, abstract = {This meta-analysis synthesizes 332 effect sizes of various methods to enhance creativity. We clustered all studies into 12 methods to identify the most effective creativity enhancement methods. We found that, on average, creativity can be enhanced, Hedges' g = 0.53, 95\% CI [0.44, 0.61], with 70.09\% of the participants in the enhancement conditions being more creative than the average person in the control conditions. Complex training courses, meditation, and cultural exposure were the most effective (gs = 0.66) while the use of cognitive manipulation drugs was the least and also noneffective, g = 0.10. The type of training material was also important. For instance, figural methods were more effective in enhancing creativity, and enhancing converging thinking was more effective than enhancing divergent thinking. Study effect sizes varied considerably across all studies and for many subgroup analyses, suggesting that researchers can plausibly expect to find reversed effects occasionally. We found no evidence of publication bias. We discuss theoretical implications and suggest future directions for best practices in enhancing creativity. (PsycInfo Database Record (c) 2023 APA, all rights reserved)}, language = {en} } @inproceedings{GrumThimRolingetal.2023, author = {Grum, Marcus and Thim, Christof and Roling, Wiebke and Sch{\"u}ffler, Arnulf and Kluge, Annette and Gronau, Norbert}, title = {AI case-based reasoning for artificial neural networks}, series = {Artificial intelligence and industrial applications}, volume = {771}, booktitle = {Artificial intelligence and industrial applications}, editor = {Masrour, Tawfik and El Hassani, Ibtissam and Barka, Noureddine}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-43523-2}, doi = {10.1007/978-3-031-43524-9_2}, pages = {17 -- 35}, year = {2023}, abstract = {Faced with the triad of time-cost-quality, the realization of production tasks under economic conditions is not trivial. Since the number of Artificial-Intelligence-(AI)-based applications in business processes is increasing more and more nowadays, the efficient design of AI cases for production processes as well as their target-oriented improvement is essential, so that production outcomes satisfy high quality criteria and economic requirements. Both challenge production management and data scientists, aiming to assign ideal manifestations of artificial neural networks (ANNs) to a certain task. Faced with new attempts of ANN-based production process improvements [8], this paper continues research about the optimal creation, provision and utilization of ANNs. Moreover, it presents a mechanism for AI case-based reasoning for ANNs. Experiments clarify continuously improving ANN knowledge bases by this mechanism empirically. Its proof-of-concept is demonstrated by the example of four production simulation scenarios, which cover the most relevant use cases and will be the basis for examining AI cases on a quantitative level.}, language = {en} } @incollection{GrumThimGronau2021, author = {Grum, Marcus and Thim, Christof and Gronau, Norbert}, title = {Aiming for knowledge-transfer-optimizing intelligent cyber-physical systems}, series = {Towards sustainable customization : cridging smart products and manufacturing systems}, booktitle = {Towards sustainable customization : cridging smart products and manufacturing systems}, editor = {Andersen, Ann-Louise and Andersen, Rasmus and Brunoe, Thomas Ditlev and Larsen, Maria Stoettrup Schioenning and Nielsen, Kjeld and Napoleone, Alessia and Kjeldgaard, Stefan}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-90699-3}, doi = {10.1007/978-3-030-90700-6_16}, pages = {149 -- 157}, year = {2021}, abstract = {Since more and more production tasks are enabled by Industry 4.0 techniques, the number of knowledge-intensive production tasks increases as trivial tasks can be automated and only non-trivial tasks demand human-machine interactions. With this, challenges regarding the competence of production workers, the complexity of tasks and stickiness of required knowledge occur [1]. Furthermore, workers experience time pressure which can lead to a decrease in output quality. Cyber-Physical Systems (CPS) have the potential to assist workers in knowledge-intensive work grounded on quantitative insights about knowledge transfer activities [2]. By providing contextual and situational awareness as well as complex classification and selection algorithms, CPS are able to ease knowledge transfer in a way that production time and quality is improved significantly. CPS have only been used for direct production and process optimization, knowledge transfers have only been regarded in assistance systems with little contextual awareness. Embedding production and knowledge transfer optimization thus show potential for further improvements. This contribution outlines the requirements and a framework to design these systems. It accounts for the relevant factors.}, language = {en} } @article{GrumSultanowFriedmannetal.2021, author = {Grum, Marcus and Sultanow, Eldar and Friedmann, Daniel and Ulrich, Andre and Gronau, Norbert}, title = {Tools des Maschinellen Lernens}, publisher = {Gito}, address = {Berlin}, isbn = {978-3-95545-380-0}, doi = {10.30844/grum_2020}, pages = {143}, year = {2021}, abstract = {K{\"u}nstliche Intelligenz ist in aller Munde. Immer mehr Anwendungsbereiche werden durch die Auswertung von vorliegenden Daten mit Algorithmen und Frameworks z.B. des Maschinellen Lernens erschlossen. Dieses Buch hat das Ziel, einen {\"U}berblick {\"u}ber gegenw{\"a}rtig vorhandene L{\"o}sungen zu geben und dar{\"u}ber hinaus konkrete Hilfestellung bei der Auswahl von Algorithmen oder Tools bei spezifischen Problemstellungen zu bieten. Um diesem Anspruch gerecht zu werden, wurden 90 L{\"o}sungen mittels einer systematischen Literaturrecherche und Praxissuche identifiziert sowie anschließend klassifiziert. Mit Hilfe dieses Buches gelingt es, schnell die notwendigen Grundlagen zu verstehen, g{\"a}ngige Anwendungsgebiete zu identifizieren und den Prozess zur Auswahl eines passenden ML-Tools f{\"u}r das eigene Projekt systematisch zu meistern.}, language = {de} } @inproceedings{GrumRappGronauetal.2019, author = {Grum, Marcus and Rapp, Simon and Gronau, Norbert and Albers, Albert}, title = {Accelerating knowledge}, series = {Business modeling and software design}, volume = {356}, booktitle = {Business modeling and software design}, editor = {Shishkov, Boris}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-24853-6}, doi = {10.1007/978-3-030-24854-3_7}, pages = {95 -- 113}, year = {2019}, abstract = {As knowledge-intensive processes are often carried out in teams and demand for knowledge transfers among various knowledge carriers, any optimization in regard to the acceleration of knowledge transfers obtains a great economic potential. Exemplified with product development projects, knowledge transfers focus on knowledge acquired in former situations and product generations. An adjustment in the manifestation of knowledge transfers in its concrete situation, here called intervention, therefore can directly be connected to the adequate speed optimization of knowledge-intensive process steps. This contribution presents the specification of seven concrete interventions following an intervention template. Further, it describes the design and results of a workshop with experts as a descriptive study. The workshop was used to assess the practical relevance of interventions designed as well as the identification of practical success factors and barriers of their implementation.}, language = {en} } @misc{GrumKoerppenKorjahnetal.2022, author = {Grum, Marcus and K{\"o}rppen, Tim and Korjahn, Nicolas and Gronau, Norbert}, title = {Entwicklung eines KI-ERP-Indikators}, publisher = {Center for Enterprise Research, Universit{\"a}t Potsdam}, address = {Potsdam}, pages = {27}, year = {2022}, abstract = {K{\"u}nstliche Intelligenz (KI) gewinnt in zahlreichen Branchen rasant an Bedeutung und wird zunehmend auch in Enterprise Resource Planning (ERP)-Systemen als Anwendungsbereich erschlossen. Die Idee, dass Maschinen die kognitiven F{\"a}higkeiten des Menschen imitieren k{\"o}nnen, indem Wissen durch Lernen auf Basis von Beispielen in Daten, Informationen und Erfahrungen generiert wird, ist heute ein Schl{\"u}sselelement der digitalen Transformation. Jedoch charakterisiert der Einsatz von KI in ERP-System einen hohen Komplexit{\"a}tsgrad, da die KI als Querschnittstechnologie zu verstehen ist, welche in unterschiedlichen Unternehmensbereichen zum Einsatz kommen kann. Auch die Anwendungsgrade k{\"o}nnen sich dabei erheblich voneinander unterscheiden. Um trotz dieser Komplexit{\"a}t den Einsatz der KI in ERP-Systemen erfassen und systembezogen vergleichen zu k{\"o}nnen, wurde im Rahmen dieser Studie ein Reifegradmodell entwickelt. Dieses bildet die Ausgangsbasis zur Ermittlung der KI-Reife in ERP-Systemen und grenzt dabei die folgenden vier KI- bzw. systembezogenen Ebenen voneinander ab: 1) Technische M{\"o}glichkeiten, 2) Datenreife, 3) Funktionsreife und 4) Erkl{\"a}rf{\"a}higkeit des Systems.}, language = {de} } @incollection{GrumKotarskiAmbrosetal.2021, author = {Grum, Marcus and Kotarski, David and Ambros, Maximilian and Biru, Tibebu and Krallmann, Hermann and Gronau, Norbert}, title = {Managing knowledge of intelligent systems}, series = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, volume = {422}, booktitle = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-79975-5}, doi = {10.1007/978-3-030-79976-2_5}, pages = {78 -- 96}, year = {2021}, abstract = {Since more and more business tasks are enabled by Artificial Intelligence (AI)-based techniques, the number of knowledge-intensive tasks increase as trivial tasks can be automated and non-trivial tasks demand human-machine interactions. With this, challenges regarding the management of knowledge workers and machines rise [9]. Furthermore, knowledge workers experience time pressure, which can lead to a decrease in output quality. Artificial Intelligence-based systems (AIS) have the potential to assist human workers in knowledge-intensive work. By providing a domain-specific language, contextual and situational awareness as well as their process embedding can be specified, which enables the management of human and AIS to ease knowledge transfer in a way that process time, cost and quality are improved significantly. This contribution outlines a framework to designing these systems and accounts for their implementation.}, language = {en} } @inproceedings{GrumKlippertAlbersetal.2021, author = {Grum, Marcus and Klippert, Monika and Albers, Albert and Gronau, Norbert and Thim, Christof}, title = {Examining the quality of knowledge transfers}, series = {Proceedings of the Design Society}, volume = {1}, booktitle = {Proceedings of the Design Society}, publisher = {Cambridge University Press}, address = {Cambridge}, issn = {2732-527X}, doi = {10.1017/pds.2021.404}, pages = {1431 -- 1440}, year = {2021}, abstract = {Already successfully used products or designs, past projects or our own experiences can be the basis for the development of new products. As reference products or existing knowledge, it is reused in the development process and across generations of products. Since further, products are developed in cooperation, the development of new product generations is characterized by knowledge-intensive processes in which information and knowledge are exchanged between different kinds of knowledge carriers. The particular knowledge transfer here describes the identification of knowledge, its transmission from the knowledge carrier to the knowledge receiver, and its application by the knowledge receiver, which includes embodied knowledge of physical products. Initial empirical findings of the quantitative effects regarding the speed of knowledge transfers already have been examined. However, the factors influencing the quality of knowledge transfer to increase the efficiency and effectiveness of knowledge transfer in product development have not yet been examined empirically. Therefore, this paper prepares an experimental setting for the empirical investigation of the quality of knowledge transfers.}, language = {en} } @article{GrumHiesslMareschetal.2021, author = {Grum, Marcus and Hiessl, Werner and Maresch, Karl and Gronau, Norbert}, title = {Design of a neuronal training modeling language}, series = {AIS-Transactions on enterprise systems}, volume = {5}, journal = {AIS-Transactions on enterprise systems}, number = {1}, publisher = {GITO-Publ., Verl. f{\"u}r Industrielle Informationstechnik und Organisation}, address = {Berlin}, issn = {1867-7134}, doi = {10.30844/aistes.v5i1.20}, pages = {16}, year = {2021}, abstract = {As the complexity of learning task requirements, computer infrastruc- tures and knowledge acquisition for artificial neuronal networks (ANN) is in- creasing, it is challenging to talk about ANN without creating misunderstandings. An efficient, transparent and failure-free design of learning tasks by models is not supported by any tool at all. For this purpose, particular the consideration of data, information and knowledge on the base of an integration with knowledge- intensive business process models and a process-oriented knowledge manage- ment are attractive. With the aim of making the design of learning tasks express- ible by models, this paper proposes a graphical modeling language called Neu- ronal Training Modeling Language (NTML), which allows the repetitive use of learning designs. An example ANN project of AI-based dynamic GUI adaptation exemplifies its use as a first demonstration.}, language = {en} } @incollection{GrumGronau2021, author = {Grum, Marcus and Gronau, Norbert}, title = {Quantification of knowledge transfers}, series = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, volume = {422}, booktitle = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-79975-5}, doi = {10.1007/978-3-030-79976-2_13}, pages = {224 -- 242}, year = {2021}, abstract = {Faced with the triad of time-cost-quality, the realization of knowledge-intensive tasks at economic conditions is not trivial. Since the number of knowledge-intensive processes is increasing more and more nowadays, the efficient design of knowledge transfers at business processes as well as the target-oriented improvement of them is essential, so that process outcomes satisfy high quality criteria and economic requirements. This particularly challenges knowledge management, aiming for the assignment of ideal manifestations of influence factors on knowledge transfers to a certain task. Faced with first attempts of knowledge transfer-based process improvements [1], this paper continues research about the quantitative examination of knowledge transfers and presents a ready-to-go experiment design that is able to examine quality of knowledge transfers empirically and is suitable to examine knowledge transfers on a quantitative level. Its use is proven by the example of four influence factors, which namely are stickiness, complexity, competence and time pressure.}, language = {en} } @incollection{GrumGronau2020, author = {Grum, Marcus and Gronau, Norbert}, title = {Adaptable knowledge-driven information systems improving knowledge transfers}, series = {Business modeling and software design : 10th International Symposium, BMSD 2020, Berlin, Germany, July 6-8, 2020, Proceedings}, volume = {391}, booktitle = {Business modeling and software design : 10th International Symposium, BMSD 2020, Berlin, Germany, July 6-8, 2020, Proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-52305-3}, doi = {10.1007/978-3-030-52306-0_13}, pages = {202 -- 220}, year = {2020}, abstract = {A growing number of business processes can be characterized as knowledge-intensive. The ability to speed up the transfer of knowledge between any kind of knowledge carriers in business processes with AR techniques can lead to a huge competitive advantage, for instance in manufacturing. This includes the transfer of person-bound knowledge as well as externalized knowledge of physical and virtual objects. The contribution builds on a time-dependent knowledge transfer model and conceptualizes an adaptable, AR-based application. Having the intention to accelerate the speed of knowledge transfers between a manufacturer and an information system, empirical results of an experimentation show the validity of this approach. For the first time, it will be possible to discover how to improve the transfer among knowledge carriers of an organization with knowledge-driven information systems (KDIS). Within an experiment setting, the paper shows how to improve the quantitative effects regarding the quality and amount of time needed for an example manufacturing process realization by an adaptable KDIS.}, language = {en} } @misc{GrumGronau2018, author = {Grum, Marcus and Gronau, Norbert}, title = {Process modeling within augmented reality}, series = {Business Modeling and Software Design, BMSD 2018}, volume = {319}, journal = {Business Modeling and Software Design, BMSD 2018}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-319-94214-8}, issn = {1865-1348}, doi = {10.1007/978-3-319-94214-8_7}, pages = {99 -- 115}, year = {2018}, abstract = {The collaboration during the modeling process is uncomfortable and characterized by various limitations. Faced with the successful transfer of first process modeling languages to the augmented world, non-transparent processes can be visualized in a more comprehensive way. With the aim to rise comfortability, speed, accuracy and manifoldness of real world process augmentations, a framework for the bidirectional interplay of the common process modeling world and the augmented world has been designed as morphologic box. Its demonstration proves the working of drawn AR integrations. Identified dimensions were derived from (1) a designed knowledge construction axiom, (2) a designed meta-model, (3) designed use cases and (4) designed directional interplay modes. Through a workshop-based survey, the so far best AR modeling configuration is identified, which can serve for benchmarks and implementations.}, language = {en} } @inproceedings{GrumBlunkRojahnetal.2020, author = {Grum, Marcus and Blunk, Oliver and Rojahn, Marcel and Fettke, Peter and Gronau, Norbert}, title = {Research challenges of knowledge modelling and the outline of a research agenda}, series = {Knowledge in digital age : IFKAD 2020}, booktitle = {Knowledge in digital age : IFKAD 2020}, publisher = {The Arts of Business Institute}, address = {Matera, Italy}, isbn = {978-88-96687-13-0}, issn = {2280-787X}, year = {2020}, language = {en} } @inproceedings{GrumBenderGronauetal.2020, author = {Grum, Marcus and Bender, Benedict and Gronau, Norbert and Alfa, Attahiru S.}, title = {Efficient task realizations in networked production infrastructures}, series = {Proceedings of the Conference on Production Systems and Logistics}, booktitle = {Proceedings of the Conference on Production Systems and Logistics}, publisher = {publish-Ing.}, address = {Hannover}, doi = {10.15488/9682}, pages = {397 -- 407}, year = {2020}, abstract = {As Industry 4.0 infrastructures are seen as highly evolutionary environment with volatile, and time-dependent workloads for analytical tasks, particularly the optimal dimensioning of IT hardware is a challenge for decision makers because the digital processing of these tasks can be decoupled from their physical place of origin. Flexible architecture models to allocate tasks efficiently with regard to multi-facet aspects and a predefined set of local systems and external cloud services have been proven in small example scenarios. This paper provides a benchmark of existing task realization strategies, composed of (1) task distribution and (2) task prioritization in a real-world scenario simulation. It identifies heuristics as superior strategies.}, language = {en} } @article{GrumBenderAlfaetal.2018, author = {Grum, Marcus and Bender, Benedict and Alfa, A. S. and Gronau, Norbert}, title = {A decision maxim for efficient task realization within analytical network infrastructures}, series = {Decision support systems : DSS ; the international journal}, volume = {112}, journal = {Decision support systems : DSS ; the international journal}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0167-9236}, doi = {10.1016/j.dss.2018.06.005}, pages = {48 -- 59}, year = {2018}, abstract = {Faced with the increasing needs of companies, optimal dimensioning of IT hardware is becoming challenging for decision makers. In terms of analytical infrastructures, a highly evolutionary environment causes volatile, time dependent workloads in its components, and intelligent, flexible task distribution between local systems and cloud services is attractive. With the aim of developing a flexible and efficient design for analytical infrastructures, this paper proposes a flexible architecture model, which allocates tasks following a machine-specific decision heuristic. A simulation benchmarks this system with existing strategies and identifies the new decision maxim as superior in a first scenario-based simulation.}, language = {en} } @misc{GronauWildemannZaeh2004, author = {Gronau, Norbert and Wildemann, Horst and Z{\"a}h, Michael F.}, title = {Entwicklung und Betrieb wandlungsf{\"a}higer Auftragsabwicklungssysteme}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6791}, year = {2004}, abstract = {Mittelst{\"a}ndische Industrieunternehmen setzen f{\"u}r ihre betrieblichen Abl{\"a}ufe Planungs- und Ausf{\"u}hrungssysteme ein. Aufgrund der Turbulenzen auf Absatz- und Beschaffungsm{\"a}rkten kann die Wirtschaftlichkeit und Wettbewerbsf{\"a}higkeit dieser Unternehmen nur durch permanente Anpassungen der Organisationsstrukturen und -abl{\"a}ufe erfolgen. In der Praxis zeigt sich eine unzureichende technologische Anpassungsf{\"a}higkeit der heute eingesetzten Standardsoftwaresysteme. Diese lassen zwar w{\"a}hrend der Einf{\"u}hrungsphase vielf{\"a}ltige Konfigurationsm{\"o}glichkeiten zu, Ver{\"a}nderungen im laufenden Betrieb sind aber meist nur mit großem Aufwand m{\"o}glich. Hier sind die Softwarehersteller in Zukunft zunehmend gefordert, wandlungsf{\"a}hige Auftragsabwicklungssysteme zu entwickeln. {\"U}ber die Entwicklungsphase (Build-Time) hinaus muss auch parallel zur Betriebsphase (Run-Time) der technische Fortschritt aufgrund von ge{\"a}nderten Anforderungen durch entsprechende Softwarereleases synchronisiert werden.}, subject = {Auftragsabwicklung}, language = {de} } @article{GronauWildemannZaeh2004, author = {Gronau, Norbert and Wildemann, H. and Z{\"a}h, M. f}, title = {Entwicklung und Betrieb wandlungsf{\"a}higer Auftragsabwicklungssysteme}, year = {2004}, language = {de} } @article{GronauWildemannZaehetal.2006, author = {Gronau, Norbert and Wildemann, H. and Zaeh, M. F. and Mueller, N. and L{\"a}mmer, Anne and Andresen, Katja}, title = {Tools zur Ermittlung der Wandlungsf{\"a}higkeit}, year = {2006}, language = {de} } @incollection{GronauWeberWanderetal.2022, author = {Gronau, Norbert and Weber, Edzard and Wander, Paul and Ullrich, Andr{\´e}}, title = {A regional remanufacturing network approach}, series = {Digitization of the work environment for sustainable production}, booktitle = {Digitization of the work environment for sustainable production}, editor = {Plapper, Peter}, publisher = {GITO Verlag}, address = {Berlin}, isbn = {978-3-95545-407-4}, doi = {10.30844/WGAB_2022_8}, pages = {145 -- 170}, year = {2022}, abstract = {Manufacturing companies still have relatively few points of contact with the circular economy. Especially, extending life time of whole products or parts via remanufacturing is an promising approach to reduce waste. However, necessary cost-efficient assessment of the condition of the individual parts is challenging and assessment procedures are technically complex (e.g., scanning and testing procedures). Furthermore, these assessment procedures are usually only available after the disassembly process has been completed. This is where conceptualization, data acquisition and simulation of remanufacturing processes can help. One major constraining aspect of remanufacturing is reducing logistic efforts, since these also have negative external effects on the environment. Thus regionalization is an additional but in the end consequential challenge for remanufacturing. This article aims to fill a gap by providing an regional remanufacturing approach, in particular the design of local remanufacturing chains. Thereby, further focus lies on modeling and simulating alternative courses of action, including feasibility study and eco-nomic assessment.}, language = {en} } @article{GronauWeberUslar2005, author = {Gronau, Norbert and Weber, Edzard and Uslar, Mathias}, title = {Institutionalization of a general electronic democracy through electronic democratic parties : a general concept with focus on Germany}, year = {2005}, abstract = {Not only the public services are able to ensure the effective and efficient use of e-democracy tools. This contribution points out how a party must be structured to function as a neutral service provider for the citizen to set the results of electronic decision-making processes generally binding. The party provides only the methodology and the technology of decision making. Contents are defined exclusively from the citizens. These contents and voting results are implemented obligatorily in the parliament by the delegates of the party. The electronic democracy contributes, in order to supplement the representative democracy, scalable around direct democratic elements. The citizens can determine all 4 or 5 years with the national elections, how much each political decision has to be affected direct democratically by edemocracy tools. Such an approach is subject to other requirements than a governmental offered service.}, language = {en} } @inproceedings{GronauWeberHeinze2011, author = {Gronau, Norbert and Weber, Edzard and Heinze, Priscilla}, title = {Cyclic process model transformation}, series = {Proceedings of the 12th European Conference on Knowledge Management}, booktitle = {Proceedings of the 12th European Conference on Knowledge Management}, number = {2}, publisher = {Academic Conferences Ltd.}, address = {Reading}, isbn = {978-1-908272-09-6}, pages = {349 -- 359}, year = {2011}, abstract = {Process analysis usually focuses only on single and selected processes. It is either existent processes that are recorded and analysed or reference processes that are implemented. So far no evident effort has been put into generalising specific process aspects into patterns and comparing those patterns with regard to their efficiency and effectiveness. This article focuses on the combination of dynamic and holistic analytical elements in enterprise architectures. Our goal is to outline an approach to analyse the development of business processes in a cyclical matter and demonstrate this approach based on an existent modelling language. We want to show that organisational learning can derive from the systematic analysis of past and existent processes from which patterns of successful problem solving can be deducted.}, language = {en} } @article{GronauWeber2004, author = {Gronau, Norbert and Weber, Edzard}, title = {Management of knowledge intensive business processes}, year = {2004}, abstract = {Knowledge processes and business processes are linked together and should be regarded together, too. Business processes can be modeled and analyzed extensively with well known and established methods. The simple signs of static knowledge does not fulfill the requirements of a comprehensive and integrated approach of process-oriented knowledge management. The Knowledge Modeler Description Language KMDL is able to represent the creation, use and necessity of knowledge along common business processes. So KMDL can be used to formalize knowledge-intensive processes with a focus on certain knowledgespecific characteristics and to identify weak points in these processes. For computer-aided modeling and analyzing the tool K-Modeler is introduced.}, language = {en} } @article{GronauWeber2004, author = {Gronau, Norbert and Weber, Edzard}, title = {Defining an infrastructure for knowledge intensive business processes}, year = {2004}, abstract = {Business processes can be modelled and analysed extensively with well known and established methods. The simple signs of static knowledge do not fulfil the requirements of a comprehensive and integrated approach of process-oriented knowledge management. The Knowledge Modelling Description Language KMDL is able to represent the creation, use and necessity of knowledge along common business processes. Therefore KMDL can be used to formalise knowledge-intensive processes with a focus on certain knowledge-specific characteristics and to identify weak points in these processes. The tool K-Modeller is introduced for a computer-aided modelling and analysing.}, language = {en} } @article{GronauWeber2004, author = {Gronau, Norbert and Weber, Edzard}, title = {Modeling of knowledge intensive business processes with the declaration language KMDL}, year = {2004}, abstract = {The Knowledge Modeler Description Language KMDL is able to represent the creation, use and necessity of knowledge along common business processes. So KMDL can be used to formalize knowledge-intensive processes with a focus on certain knowledge-specific characteristics and to identify weak points in these processes. For a computer-aided modeling and analyzing the tool K-Modeler is introduced.}, language = {en} } @article{GronauVladovaWeberetal.2014, author = {Gronau, Norbert and Vladova, Gergana and Weber, Nadja and Heinze, Priscilla and Weber, Edzard}, title = {KMDL® v2.2}, series = {Handbuch prozessorientiertes Wissensmanagment}, journal = {Handbuch prozessorientiertes Wissensmanagment}, publisher = {GITO}, address = {Berlin}, isbn = {978-3-95545-026-7}, pages = {133 -- 198}, year = {2014}, language = {de} } @incollection{GronauVladovaThim2008, author = {Gronau, Norbert and Vladova, Gergana and Thim, Christof}, title = {Umgang mit Wissen im interkulturellen Vergleich}, series = {Umgang mit Wissen im interkulturellen Vergleich : Beitr{\"a}ge aus Forschung und Unternehmenspraxis ; Acatech-Workshop, Potsdam, 20. Mai 2008}, volume = {2008}, booktitle = {Umgang mit Wissen im interkulturellen Vergleich : Beitr{\"a}ge aus Forschung und Unternehmenspraxis ; Acatech-Workshop, Potsdam, 20. Mai 2008}, publisher = {Fraunhofer-IRB-Verl.}, address = {Stuttgart}, isbn = {978-3-8167-7822-6}, pages = {11 -- 25}, year = {2008}, abstract = {Die Bedeutung der Ressource Wissen f{\"u}r die Unternehmensentwicklung ist heutzutage unumstritten. Um wettbewerbsf{\"a}hig bleiben zu k{\"o}nnen, m{\"u}ssen Unternehmen die Erzeugung, Teilung und systematische Nutzung von Wissen f{\"o}rdern. Dabei stehen sowohl die individuelle Wissensbasis (und damit jeder Mitarbeiter) als auch die kollektive Wissensbasis (und damit das ganze Unternehmen) im Vordergrund. Der Faktor Kultur gewinnt in diesem Zusammenhang zunehmend an Bedeutung: Er beeinflusst alle drei Ebenen des Wissensmanagements - Mensch, Organisation und Technologie. Neben den Besonderheiten der Organisationskultur und der Kultur unterschiedlicher Mitarbeitergruppen sind in international agierenden Unternehmen auch die spezifischen Merkmale der jeweiligen Landeskultur zu ber{\"u}cksichtigen. Gemeinsam mit dem Lehrstuhl f{\"u}r Wirtschaftsinformatik und Electronic Government der Universit{\"a}t Potsdam hat acatech im Mai 2008 einen Workshop mit Vertretern aus Wirtschaft, Politik und Wissenschaft zum Umgang mit Wissen im interkulturellen Vergleich veranstaltet. Vor diesem Hintergrund entstand der acatech diskutiert-Band "Umgang mit Wissen im interkulturellen Vergleich - Beitr{\"a}ge aus Forschung und Unternehmenspraxis". Darin enthalten sind Beitr{\"a}ge, die u. a. danach fragen, welche wechselseitigen Beziehungen zwischen Technik und Kultur bestehen, inwieweit Experten- und Wissensnetzwerke als interkulturelles Instrument zum Umgang mit Wissen geeignet sind, wie Unternehmen ihre Mitarbeiter auf Auslandseins{\"a}tze und die Begegnung mit fremden Kulturen vorbereiten k{\"o}nnen und welche Rolle Kommunikation als Methode des Wissenstransfers spielt.}, language = {de} } @article{GronauUslar2004, author = {Gronau, Norbert and Uslar, Mathias}, title = {Antipattern zur Potenzial-Analyse mittels KMDL in wissensintensiven Prozessen}, isbn = {3-936771-31-6}, year = {2004}, language = {de} } @article{GronauUslar2004, author = {Gronau, Norbert and Uslar, Mathias}, title = {Skill management catalogues built via KMDL : integrating knowledge and business process modelling}, year = {2004}, abstract = {The efficient use of human capital is one of the most important factors in todays' business competition. Competition is strongly influenced by qualified staff. In order to aid the human resources department to keep up with strategic decisions various skill management systems have been created that make the development of human resources easier and more precise. Skill management systems are only as good as the information that they are based on. The mostly used basic information is the skill catalogue which shows the gaps of each employee or division within the company. But there are nearly no applicable methods yet to create such a catalogue thoroughly. This paper introduces a reasonable approach to create such a catalogue with the description language for knowledge-intensive processes KMDL. The skill catalogue built for skill management systems is one of the most important but still most neglected factors when introducing skill management.}, language = {en} } @article{GronauUslar2004, author = {Gronau, Norbert and Uslar, Mathias}, title = {Integrating knowledge management and human resources via skill management}, year = {2004}, abstract = {Knowledge is more and more a key factor within companies. Nearly 40 percent of all employees are so called "knowledge workers". Distribution and inquest of knowledge within companies are supported by skill management systems. Although not all aspects and potentials of this instrument are yet utilized skill management systems have spread widely within business organizations. This paper summarizes the requirements, scopes and problems for skill management system within the company.}, language = {en} } @article{GronauUslar2004, author = {Gronau, Norbert and Uslar, Mathias}, title = {Requirements and Recommenders for skill management}, year = {2004}, abstract = {Knowledge is more and more a key factor within companies [10]. Nearly 40 percent of all employees are so called 'knowledge workers'. Distribution and inquest of knowledge within companies are supported by skill management systems. Although not all aspects and potentials of this instrument are yet utilized skill management systems have spread widely within business organizations. This paper summarizes the requirements, scopes and problems for skill management system within the company.}, language = {en} } @article{GronauUslar2004, author = {Gronau, Norbert and Uslar, Mathias}, title = {Creating Skill Catalogues for Competency Management Systems with KMDL}, year = {2004}, abstract = {The efficient use of human capital is one of the most important factors in todays' business competition. Competition is strongly influenced by qualified staff. In order to aid the human resources department to keep up with strategic decisions various competency management systems have been created that make the development of human resources easier and more precise. Competency management systems are only as good as the information that they are based on. The mostly used basic information is the skill catalogue. But there are nearly no applicable methods yet to create such a catalogue thoroughly. This paper introduces a reasonable approach to create such a catalogue with the description language for knowledge-intensive processes KMDL.}, language = {en} } @article{GronauUlrichBender2017, author = {Gronau, Norbert and Ulrich, Andre and Bender, Benedict}, title = {Hybride Lernfabrik im Anwendungszentrum Industrie 4.0}, series = {Industrial Internet of Things in der Arbeits- und Betriebsorganisation}, journal = {Industrial Internet of Things in der Arbeits- und Betriebsorganisation}, publisher = {Gito}, address = {Berlin}, isbn = {978-3-95545-225-4}, pages = {1 -- 23}, year = {2017}, language = {de} } @misc{GronauUllrichTeichmann2017, author = {Gronau, Norbert and Ullrich, Andr{\´e} and Teichmann, Malte}, title = {Development of the industrial IoT competences in the areas of organization, process, and interaction based on the learning factory concept}, series = {Procedia manufacturing}, volume = {9}, journal = {Procedia manufacturing}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2351-9789}, doi = {10.1016/j.promfg.2017.04.029}, pages = {254 -- 261}, year = {2017}, abstract = {Lately, first implementation approaches of Internet of Things (IoT) technologies penetrate industrial value-adding processes. Within this, the competence requirements for employees are changing. Employees' organization, process, and interaction competences are of crucial importance in this new IoT environment, however, in students and vocational training not sufficiently considered yet. On the other hand, conventional learning factories evolve and transform to digital learning factories. Nevertheless, the integration of IoT technology and its usage for training in digital learning factories has been largely neglected thus far. Existing learning factories do not explicitly and properly consider IoT technology, which leads to deficiencies regarding an appropriate development of employees' Industrial IoT competences. The goal of this contribution is to point out a didactic concept that enables development and training of these new demanded competences by using an IoT laboratory. For this purpose, a design science approach is applied. The result of this contribution is a didactic concept for the development of Industrial IoT competences in an IoT laboratory.}, language = {en} } @incollection{GronauTeichmannWeber2023, author = {Gronau, Norbert and Teichmann, Malte and Weber, Edzard}, title = {Serious game-based haptic modeling}, series = {Business modeling and software design}, booktitle = {Business modeling and software design}, editor = {Shishkov, Boris}, publisher = {Springer Nature}, address = {Cham}, isbn = {978-3-031-36756-4}, doi = {10.1007/978-3-031-36757-1_3}, pages = {32 -- 55}, year = {2023}, abstract = {The authors propose that while tacit knowledge is a valuable resource for developing new business models, its externalization presents several challenges. One major challenge is that individuals often don't recognize their tacit knowledge resources, while another is the reluctance to share one's knowledge with others. Addressing these challenges, the authors present an application-oriented serious game-based haptic modeling approach for externalize tacit knowledge, which can be used to develop the first versions of business models based on tacit knowledge. Both conceptual and practical design fundamentals are presented based on elaborated theoretical approaches, which were developed with the help of a design science approach. The development of the research process is presented step by step, whereby we focused on the high accessibility of the presented research. Practitioners are presented with guidelines for implementing their serious game projects. Scientists benefit from starting points for their research topics of externalization, internalization, and socialization of tacit knowledge, development of business models, and serious games or gamification. The paper concludes with open research desiderata and questions from the presented research process.}, language = {en} } @article{GronauTeichmann2020, author = {Gronau, Norbert and Teichmann, Malte}, title = {ERP-Auswahl f{\"u}r ein Professional Services Unternehmen}, series = {ERP-Management : Auswahl, Einf{\"u}hrung und Betrieb von ERP-Systemen}, volume = {16}, journal = {ERP-Management : Auswahl, Einf{\"u}hrung und Betrieb von ERP-Systemen}, number = {2}, publisher = {Gito mbh Verlag f{\"u}r Industrielle Informationstechnik und Organisation}, address = {Berlin}, issn = {1860-6725}, doi = {10.30844/ERP_20-2_31-35}, pages = {31 -- 35}, year = {2020}, abstract = {Die Branche der Dienstleistungsunternehmen (Professional Services) hat einige Anforderungen, die sie von den „klassischen" ERP-Branchen Industrie und Handel unterscheidet. Dieser Beitrag beschreibt einige der aktuellen Herausforderungen dieses immer wichtiger werdenden Wirtschaftszweigs und geht dann am Beispiel eines mittelst{\"a}ndischen Ingenieurdienstleisters auf typische Anforderungen dieser Branche, infrage kommende Systeme und das Vorgehen zur Auswahl ein.}, language = {de} } @article{GronauSteinEggertetal.2008, author = {Gronau, Norbert and Stein, Maureen and Eggert, Sandy and L{\"a}mmer, Anne}, title = {Integration {\"o}ffentlicher Anwendungslandschaften}, year = {2008}, language = {de} } @article{GronauSielaffRoechertVoigtetal.2009, author = {Gronau, Norbert and Sielaff, S and R{\"o}chert-Voigt, Tanja and Stein, Maureen and Weber, Edzard}, title = {Change capability of protection systems}, isbn = {978-1-8456-4202-0}, year = {2009}, language = {en} } @article{GronauSchmidLindemann2007, author = {Gronau, Norbert and Schmid, Simone and Lindemann, Marcus}, title = {RoI-basierte Auswahl von ERP-Systemen}, isbn = {978-3- 940019-23-3}, year = {2007}, language = {de} } @article{GronauSchmidLindemann2006, author = {Gronau, Norbert and Schmid, Simone and Lindemann, Marcus}, title = {Investitionsreport MES}, year = {2006}, language = {de} } @article{GronauSchmidBahrs2007, author = {Gronau, Norbert and Schmid, Simone and Bahrs, Julian}, title = {Wissen erfolgreich managen}, year = {2007}, language = {de} }