@article{LontsiGarciaJerezCamiloMolinaVillegasetal.2019, author = {Lontsi, Agostiny Marrios and Garcia-Jerez, Antonio and Camilo Molina-Villegas, Juan and Jose Sanchez-Sesma, Francisco and Molkenthin, Christian and Ohrnberger, Matthias and Kr{\"u}ger, Frank and Wang, Rongjiang and Fah, Donat}, title = {A generalized theory for full microtremor horizontal-to-vertical [H/V(z,f)] spectral ratio interpretation in offshore and onshore environments}, series = {Geophysical journal international}, volume = {218}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggz223}, pages = {1276 -- 1297}, year = {2019}, abstract = {Advances in the field of seismic interferometry have provided a basic theoretical interpretation to the full spectrum of the microtremor horizontal-to-vertical spectral ratio [H/V(f)]. The interpretation has been applied to ambient seismic noise data recorded both at the surface and at depth. The new algorithm, based on the diffuse wavefield assumption, has been used in inversion schemes to estimate seismic wave velocity profiles that are useful input information for engineering and exploration seismology both for earthquake hazard estimation and to characterize surficial sediments. However, until now, the developed algorithms are only suitable for on land environments with no offshore consideration. Here, the microtremor H/V(z, f) modelling is extended for applications to marine sedimentary environments for a 1-D layered medium. The layer propagator matrix formulation is used for the computation of the required Green's functions. Therefore, in the presence of a water layer on top, the propagator matrix for the uppermost layer is defined to account for the properties of the water column. As an application example we analyse eight simple canonical layered earth models. Frequencies ranging from 0.2 to 50 Hz are considered as they cover a broad wavelength interval and aid in practice to investigate subsurface structures in the depth range from a few meters to a few hundreds of meters. Results show a marginal variation of 8 per cent at most for the fundamental frequency when a water layer is present. The water layer leads to variations in H/V peak amplitude of up to 50 per cent atop the solid layers.}, language = {en} } @article{TuGeWangetal.2014, author = {Tu, Rui and Ge, Maorong and Wang, Rongjiang and Walter, Thomas R.}, title = {A new algorithm for tight integration of real-time GPS and strong-motion records, demonstrated on simulated, experimental, and real seismic data}, series = {Journal of seismology}, volume = {18}, journal = {Journal of seismology}, number = {1}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-013-9408-x}, pages = {151 -- 161}, year = {2014}, abstract = {The complementary advantages of GPS and seismic measurements are well recognized in seismotectonic monitoring studies. Therefore, integrated processing of the two data streams has been proposed recently in an attempt to obtain accurate and reliable information of surface displacements associated with earthquakes. A hitherto still critical issue in the integrated processing is real-time detection and precise estimation of the transient baseline error in the seismic records. Here, we report on a new approach by introducing the seismic acceleration corrected by baseline errors into the state equation system. The correction is performed and regularly updated in short epochs (with increments which may be as short as seconds), so that station position, velocity, and acceleration can be constrained very tightly and baseline error can be estimated as a random-walk process. With the adapted state equation system, our study highlights the use of a new approach developed for integrated processing of GPS and seismic data by means of sequential least-squares adjustment. The efficiency of our approach is demonstrated and validated using simulated, experimental, and real datasets. The latter were collected at collocated GPS and seismic stations around the 4 April 2010, E1 Mayor-Cucapah earthquake (Mw, 7.2). The results have shown that baseline errors of the strong-motion sensors are corrected precisely and high-precision seismic displacements are real-timely obtained by the new approach.}, language = {en} } @article{TuWangWalteretal.2014, author = {Tu, Rui and Wang, Rongjiang and Walter, Thomas R. and Diao, FaQi}, title = {Adaptive recognition and correction of baseline shifts from collocated GPS and accelerometer using two phases Kalman filter}, series = {Advances in space research}, volume = {54}, journal = {Advances in space research}, number = {9}, publisher = {Elsevier}, address = {Oxford}, issn = {0273-1177}, doi = {10.1016/j.asr.2014.07.008}, pages = {1924 -- 1932}, year = {2014}, abstract = {The real-time recognition and precise correction of baseline shifts in strong-motion records is a critical issue for GPS and accelerometer combined processing. This paper proposes a method to adaptively recognize and correct baseline shifts in strong-motion records by utilizing GPS measurements using two phases Kalman filter. By defining four kinds of learning statistics and criteria, the time series of estimated baseline shifts can be divided into four time intervals: initialization, static, transient and permanent. During the time interval in which the transient baseline shift is recognized, the dynamic noise of the Kalman filter system and the length of the baseline shifts estimation window are adaptively adjusted to yield a robust integration solution. The validations from an experimental and real datasets show that acceleration baseline shifts can be precisely recognized and corrected, thus, the combined system adaptively adjusted the estimation strategy to get a more robust solution. (C) 2014 COSPAR. Published by Elsevier Ltd. All rights reserved.}, language = {en} } @article{HeimannGonzalezWangetal.2013, author = {Heimann, Sebastian and Gonzalez, Alvaro and Wang, Rongjiang and Cesca, Simone and Dahm, Torsten}, title = {Seismic characterization of the Chelyabinsk Meteor's terminal explosion}, series = {Seismological research letters}, volume = {84}, journal = {Seismological research letters}, number = {6}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0895-0695}, doi = {10.1785/0220130042}, pages = {1021 -- 1025}, year = {2013}, language = {en} } @article{HainzlZoellerWang2010, author = {Hainzl, Sebastian and Z{\"o}ller, Gert and Wang, Rongjiang}, title = {Impact of the receiver fault distribution on aftershock activity}, issn = {0148-0227}, doi = {10.1029/2008jb006224}, year = {2010}, abstract = {Aftershock models are usually based either on purely empirical relations ignoring the physical mechanism or on deterministic calculations of stress changes on a predefined receiver fault orientation. Here we investigate the effect of considering more realistic fault systems in models based on static Coulomb stress changes. For that purpose, we perform earthquake simulations with elastic half-space stress interactions, rate-and-state dependent frictional earthquake nucleation, and extended ruptures with heterogeneous (fractal) slip distributions. We find that the consideration of earthquake nucleation on multiple receiver fault orientations does not influence the shape of the temporal Omori-type aftershock decay, but changes significantly the predicted spatial patterns and the total number of triggered events. So-called stress shadows with decreased activity almost vanish, and activation decays continuously with increasing distance from the main shock rupture. The total aftershock productivity, which is shown to be almost independent of the assumed background rate, increases significantly if multiple receiver fault planes exist. The application to the 1992 M7.3 Landers, California, aftershock sequence indicates a good agreement with the locations and the total productivity of the observed directly triggered aftershocks.}, language = {en} } @article{ParolaiAnsalKurtulusetal.2009, author = {Parolai, Stefano and Ansal, Atilla and Kurtulus, Asil and Strollo, Angelo and Wang, Rongjiang and Zschau, Jochen}, title = {The Atakoey vertical array (Turkey) : insights into seismic wave propagation in the shallow-most crustal layers by waveform deconvolution}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2009.04257.x}, year = {2009}, abstract = {P>A vertical array of accelerometers was installed in Atakoy (western Istanbul) with the long-term aim of improving our understanding of in situ soil behaviour, to assess the modelling and parametric uncertainties associated with the employed methodologies for strong-motion site-response analysis, and for shallow geological investigations. Geotechnical and geophysical investigations were carried out to define the subsoil structure at the selected site. Data associated with 10 earthquakes (2.7 < M < 4.3) collected during the first months of operation of the array were used to image the upgoing and downgoing waves by deconvolution of waveforms recorded at different depths. Results have shown that the velocity of propagation of the imaged upgoing and downgoing waves in the borehole is consistent with that of S or P waves, depending on the component of ground acceleration analysed but independent of the chosen signal window. In particular, an excellent agreement was found between the observed upgoing and downgoing wave traveltimes and the ones calculated using a model derived by seismic noise analysis of array data. The presence of a smaller pulse on the waveforms obtained by deconvolution of the horizontal components suggests both internal S-wave reflection and S-to-P mode conversion, as well as a not normal incidence of the wavefield. The presence of a pulse propagating with S-wave velocity in the uppermost 25 m in the waveforms obtained by the deconvolution of the vertical components suggests P-to-S mode conversion. These evidences imply that, even when site amplification is mainly related to 1-D effects, the standard practice in engineering seismology of deconvolving the surface recording down to the bedrock using an approximate S-wave transfer function (generally valid for vertical incidence of SH waves) might lead to errors in the estimation of the input ground motion required in engineering calculations. Finally, downgoing waves with significant amplitudes were found down to 70 m and even to 140 m depth. This result provides a warning about the use of shallow borehole recordings as input for the numerical simulation of ground motion and for the derivation of ground motion prediction relationships.}, language = {en} }