@phdthesis{Tympel2014,
  author    = {Tympel, Jens G{\"u}nter},
  title     = {Numerical modeling of the Cenozoic Pamir-Tien Shan orogeny},
  pages     = {168},
  year      = {2014},
  language  = {en}
}
@phdthesis{Munack2014,
  author    = {Munack, Henry},
  title     = {From phantom blocks to denudational noise},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-72629},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 172},
  year      = {2014},
  abstract  = {Knowing the rates and mechanisms of geomorphic process that shape the Earth's surface is crucial to understand landscape evolution. Modern methods for estimating denudation rates enable us to quantitatively express and compare processes of landscape downwearing that can be traced through time and space—from the seemingly intact, though intensely shattered, phantom blocks of the catastrophically fragmented basal facies of giant rockslides up to denudational noise in orogen-wide data sets averaging over several millennia. This great variety of spatiotemporal scales of denudation rates is both boon and bane of geomorphic process rates. Indeed, processes of landscape downwearing can be traced far back in time, helping us to understand the Earth's evolution. Yet, this benefit may turn into a drawback due to scaling issues if these rates are to be compared across different observation timescales. This thesis investigates the mechanisms, patterns and rates of landscape downwearing across the Himalaya-Tibet orogen. Accounting for the spatiotemporal variability of denudation processes, this thesis addresses landscape downwearing on three distinctly different spatial scales, starting off at the local scale of individual hillslopes where considerable amounts of debris are generated from rock instantaneously: Rocksliding in active mountains is a major impetus of landscape downwearing. Study I provides a systematic overview of the internal sedimentology of giant rockslide deposits and thus meets the challenge of distinguishing them from macroscopically and microscopically similar glacial deposits, tectonic fault-zone breccias, and impact breccias. This distinction is important to avoid erroneous or misleading deduction of paleoclimatic or tectonic implications. -> Grain size analysis shows that rockslide-derived micro-breccia closely resemble those from meteorite impact or tectonic faults. -> Frictionite may occur more frequently that previously assumed. -> M{\"o}ssbauer-spectroscopy derived results indicate basal rock melting in the absence of water, involving short-term temperatures of >1500°C. Zooming out, Study II tracks the fate of these sediments, using the example of the upper Indus River, NW India. There we use river sand samples from the Indus and its tributaries to estimate basin-averaged denudation rates along a ~320-km reach across the Tibetan Plateau margin, to answer the question whether incision into the western Tibetan Plateau margin is currently active or not. -> We find an about one-order-of-magnitude upstream decay—from 110 to 10 mm kyr^-1—of cosmogenic Be-10-derived basin-wide denudation rates across the morphological knickpoint that marks the transition from the Transhimalayan ranges to the Tibetan Plateau. This trend is corroborated by independent bulk petrographic and heavy mineral analysis of the same samples. -> From the observation that tributary-derived basin-wide denudation rates do not increase markedly until ~150-200 km downstream of the topographic plateau margin we conclude that incision into the Tibetan Plateau is inactive. -> Comparing our postglacial Be-10-derived denudation rates to long-term (>10^6 yr) estimates from low-temperature thermochronometry, ranging from 100 to 750 mm kyr^-1, points to an order- of-magnitude decay of rates of landscape downwearing towards present. We infer that denudation rates must have been higher in the Quaternary, probably promoted by the interplay of glacial and interglacial stages. Our investigation of regional denudation patterns in the upper Indus finally is an integral part of Study III that synthesizes denudation of the Himalaya-Tibet orogen. In order to identify general and time-invariant predictors for Be-10-derived denudation rates we analyze tectonic, climatic and topographic metrics from an inventory of 297 drainage basins from various parts of the orogen. Aiming to get insight to the full response distributions of denudation rate to tectonic, climatic and topographic candidate predictors, we apply quantile regression instead of ordinary least squares regression, which has been standard analysis tool in previous studies that looked for denudation rate predictors. -> We use principal component analysis to reduce our set of 26 candidate predictors, ending up with just three out of these: Aridity Index, topographic steepness index, and precipitation of the coldest quarter of the year. -> Topographic steepness index proves to perform best during additive quantile regression. Our consequent prediction of denudation rates on the basin scale involves prediction errors that remain between 5 and 10 mm kyr^-1. -> We conclude that while topographic metrics such as river-channel steepness and slope gradient—being representative on timescales that our cosmogenic Be-10-derived denudation rates integrate over—generally appear to be more suited as predictors than climatic and tectonic metrics based on decadal records.},
  language  = {en}
}
@phdthesis{Sayago2014,
  author    = {Sayago, Jhosnella},
  title     = {Late Paleozoic basin analysis of the Loppa High and Finnmark Platform in the Norwegian Barents Sea : integration of seismic attributes and seismic sequence stratigraphy},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72576},
  school      = {Universit{\"a}t Potsdam},
  pages     = {viii, 109},
  year      = {2014},
  abstract  = {The subsurface upper Palaeozoic sedimentary successions of the Loppa High half-graben and the Finnmark platform in the Norwegian Barents Sea (southwest Barents Sea) were investigated using 2D/3D seismic datasets combined with well and core data. These sedimentary successions represent a case of mixed siliciclastic-carbonates depositional systems, which formed during the earliest phase of the Atlantic rifting between Greenland and Norway. During the Carboniferous and Permian the southwest part of the Barents Sea was located along the northern margin of Pangaea, which experienced a northward drift at a speed of ~2-3 mm per year. This gradual shift in the paleolatitudinal position is reflected by changes in regional climatic conditions: from warm-humid in the early Carboniferous, changing to warm-arid in the middle to late Carboniferous and finally to colder conditions in the late Permian. Such changes in paleolatitude and climate have resulted in major changes in the style of sedimentation including variations in the type of carbonate factories. The upper Palaeozoic sedimentary succession is composed of four major depositional units comprising chronologically the Billefjorden Group dominated by siliciclastic deposition in extensional tectonic-controlled wedges, the Gipsdalen Group dominated by warm-water carbonates, stacked buildups and evaporites, the Bjarmeland Group characterized by cool-water carbonates as well as by the presence of buildup networks, and the Tempelfjorden Group characterized by fine-grained sedimentation dominated by biological silica production. In the Loppa High, the integration of a core study with multi-attribute seismic facies classification allowed highlighting the main sedimentary unconformities and mapping the spatial extent of a buried paleokarst terrain. This geological feature is interpreted to have formed during a protracted episode of subaerial exposure occurring between the late Palaeozoic and middle Triassic. Based on seismic sequence stratigraphy analysis the palaeogeography in time and space of the Loppa High basin was furthermore reconstructed and a new and more detailed tectono-sedimentary model for this area was proposed. In the Finnmark platform area, a detailed core analysis of two main exploration wells combined with key 2D seismic sections located along the main depositional profile, allowed the evaluation of depositional scenarios for the two main lithostratigraphic units: the {\O}rn Formation (Gipsdalen Group) and the Isbj{\o}rn Formation (Bjarmeland Group). During the mid-Sakmarian, two major changes were observed between the two formations including (1) the variation in the type of the carbonate factories, which is interpreted to be depth-controlled and (2) the change in platform morphology, which evolved from a distally steepened ramp to a homoclinal ramp. The results of this study may help supporting future reservoirs characterization of the upper Palaeozoic units in the Barents Sea, particularly in the Loppa High half-graben and the Finmmark platform area.},
  language  = {en}
}
@phdthesis{Schollaen2014,
  author    = {Schollaen, Karina},
  title     = {Tracking climate signals in tropical trees},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71947},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {The tropical warm pool waters surrounding Indonesia are one of the equatorial heat and moisture sources that are considered as a driving force of the global climate system. The climate in Indonesia is dominated by the equatorial monsoon system, and has been linked to El Ni{\~n}o-Southern Oscillation (ENSO) events, which often result in severe droughts or floods over Indonesia with profound societal and economic impacts on the populations living in the world's fourth most populated country. The latest IPCC report states that ENSO will remain the dominant mode in the tropical Pacific with global effects in the 21st century and ENSO-related precipitation extremes will intensify. However, no common agreement exists among climate simulation models for projected change in ENSO and the Australian-Indonesian Monsoon. Exploring high-resolution palaeoclimate archives, like tree rings or varved lake sediments, provide insights into the natural climate variability of the past, and thus helps improving and validating simulations of future climate changes. Centennial tree-ring stable isotope records | Within this doctoral thesis the main goal was to explore the potential of tropical tree rings to record climate signals and to use them as palaeoclimate proxies. In detail, stable carbon (δ13C) and oxygen (δ18O) isotopes were extracted from teak trees in order to establish the first well-replicated centennial (AD 1900-2007) stable isotope records for Java, Indonesia. Furthermore, different climatic variables were tested whether they show significant correlation with tree-ring proxies (ring-width, δ13C, δ18O). Moreover, highly resolved intra-annual oxygen isotope data were established to assess the transfer of the seasonal precipitation signal into the tree rings. Finally, the established oxygen isotope record was used to reveal possible correlations with ENSO events. Methodological achievements | A second goal of this thesis was to assess the applicability of novel techniques which facilitate and optimize high-resolution and high-throughput stable isotope analysis of tree rings. Two different UV-laser-based microscopic dissection systems were evaluated as a novel sampling tool for high-resolution stable isotope analysis. Furthermore, an improved procedure of tree-ring dissection from thin cellulose laths for stable isotope analysis was designed. The most important findings of this thesis are: I) The herein presented novel sampling techniques improve stable isotope analyses for tree-ring studies in terms of precision, efficiency and quality. The UV-laser-based microdissection serve as a valuable tool for sampling plant tissue at ultrahigh-resolution and for unprecedented precision. II) A guideline for a modified method of cellulose extraction from wholewood cross-sections and subsequent tree-ring dissection was established. The novel technique optimizes the stable isotope analysis process in two ways: faster and high-throughput cellulose extraction and precise tree-ring separation at annual to high-resolution scale. III) The centennial tree-ring stable isotope records reveal significant correlation with regional precipitation. High-resolution stable oxygen values, furthermore, allow distinguishing between dry and rainy season rainfall. IV) The δ18O record reveals significant correlation with different ENSO flavors and demonstrates the importance of considering ENSO flavors when interpreting palaeoclimatic data in the tropics. The findings of my dissertation show that seasonally resolved δ18O records from Indonesian teak trees are a valuable proxy for multi-centennial reconstructions of regional precipitation variability (monsoon signals) and large-scale ocean-atmosphere phenomena (ENSO) for the Indo-Pacific region. Furthermore, the novel methodological achievements offer many unexplored avenues for multidisciplinary research in high-resolution palaeoclimatology.},
  language  = {en}
}
@phdthesis{Muksin2014,
  author    = {Muksin, Umar},
  title     = {A fault-controlled geothermal system in Tarutung (North Sumatra, Indonesia)investigated by seismological analysis},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72065},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {The seismic structure (Vp, Vp/Vs, and Qp anomalies) contributes to the physical properties and the lithology of rocks and possible fluid distribution in the region. The Vp model images the geometry of the Tarutung and the Sarulla basins. Both basins have a depth of around 2.0 km. High Vp/Vs and high attenuation (low Qp) anomalies are observed along the Sarulla graben associated with a weak zone caused by volcanic activities along the graben. Low Vp/Vs and low conductivity anomalies are found in the west of the Tarutung basin. This anomaly is interpreted as dry, compact, and rigid granitic rock in the region as also found by geological observations. Low Vp, high Vp/Vs and low Qp anomalies are found at the east of the Tarutung basin which appear to be associated with the three big geothermal manifestations in Sipoholon, Hutabarat, and Panabungan area. These anomalies are connected with high Vp/Vs and low Qp anomalies below the Tarutung basin at depth of around 3 - 10 km. This suggests that these geothermal manifestations are fed by the same source of the hot fluid below the Tarutung basin. The hot fluids from below the Tarutung basin propagate to the more dilatational and more permeable zone in the northeast. Granite found in the west of the Tarutung basin could also be abundant underneath the basin at a certain depth so that it prevents the hot fluid to be transported directly to the Tarutung basin. High seismic attenuation and low Vp/Vs anomalies are found in the southwest of the Tarutung basin below the Martimbang volcano. These anomalies are associated with hot rock below the volcano without or with less amount of partial melting. There is no indication that the volcano controls the geothermal system around the Tarutung basin. The geothermal resources around the Tarutung basin is a fault-controlled system as a result of deep circulation of fluids. Outside of the basin, the seismicity delineation and the focal mechanism correlate with the shape and the characteristics of the strike-slip Sumatran fault. Within the Tarutung basin, the seismicity is distributed more broadly which coincides with the margin of the basin. An extensional duplex system in the Tarutung basin is derived from the seismicity and focal mechanism analysis which is also consistent with the geological observations. The vertical distribution of the seismicity suggests the presence of a negative flower structure within the Tarutung basin.},
  language  = {de}
}
@phdthesis{Radeff2014,
  author    = {Radeff, Giuditta},
  title     = {Geohistory of the Central Anatolian Plateau southern margin (southern Turkey)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71865},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {The Adana Basin of southern Turkey, situated at the SE margin of the Central Anatolian Plateau is ideally located to record Neogene topographic and tectonic changes in the easternmost Mediterranean realm. Using industry seismic reflection data we correlate 34 seismic profiles with corresponding exposed units in the Adana Basin. The time-depth conversion of the interpreted seismic profiles allows us to reconstruct the subsidence curve of the Adana Basin and to outline the occurrence of a major increase in both subsidence and sedimentation rates at 5.45 - 5.33 Ma, leading to the deposition of almost 1500 km3 of conglomerates and marls. Our provenance analysis of the conglomerates reveals that most of the sediment is derived from and north of the SE margin of the Central Anatolian Plateau. A comparison of these results with the composition of recent conglomerates and the present drainage basins indicates major changes between late Messinian and present-day source areas. We suggest that these changes in source areas result of uplift and ensuing erosion of the SE margin of the plateau. This hypothesis is supported by the comparison of the Adana Basin subsidence curve with the subsidence curve of the Mut Basin, a mainly Neogene basin located on top of the Central Anatolian Plateau southern margin, showing that the Adana Basin subsidence event is coeval with an uplift episode of the plateau southern margin. The collection of several fault measurements in the Adana region show different deformation styles for the NW and SE margins of the Adana Basin. The weakly seismic NW portion of the basin is characterized by extensional and transtensional structures cutting Neogene deposits, likely accomodating the differential uplift occurring between the basin and the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Central Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break-off.},
  language  = {en}
}
@phdthesis{Bathke2014,
  author    = {Bathke, Hannes},
  title     = {An investigation of complex deformation patterns detected by using InSAR at Llaima and Tend{\"u}rek volcanoes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70522},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Surface displacement at volcanic edifices is related to subsurface processes associated with magma movements, fluid transfers within the volcano edifice and gravity-driven deformation processes. Understanding of associated ground displacements is of importance for assessment of volcanic hazards. For example, volcanic unrest is often preceded by surface uplift, caused by magma intrusion and followed by subsidence, after the withdrawal of magma. Continuous monitoring of the surface displacement at volcanoes therefore might allow the forecasting of upcoming eruptions to some extent. In geophysics, the measured surface displacements allow the parameters of possible deformation sources to be estimated through analytical or numerical modeling. This is one way to improve the understanding of subsurface processes acting at volcanoes. Although the monitoring of volcanoes has significantly improved in the last decades (in terms of technical advancements and number of monitored volcanoes), the forecasting of volcanic eruptions remains puzzling. In this work I contribute towards the understanding of the subsurface processes at volcanoes and thus to the improvement of volcano eruption forecasting. I have investigated the displacement field of Llaima volcano in Chile and of Tend{\"u}rek volcano in East Turkey by using synthetic aperture radar interferometry (InSAR). Through modeling of the deformation sources with the extracted displacement data, it was possible to gain insights into potential subsurface processes occurring at these two volcanoes that had been barely studied before. The two volcanoes, although of very different origin, composition and geometry, both show a complexity of interacting deformation sources. At Llaima volcano, the InSAR technique was difficult to apply, due to the large decorrelation of the radar signal between the acquisition of images. I developed a model-based unwrapping scheme, which allows the production of reliable displacement maps at the volcano that I used for deformation source modeling. The modeling results show significant differences in pre- and post-eruptive magmatic deformation source parameters. Therefore, I conjecture that two magma chambers exist below Llaima volcano: a post-eruptive deep one and a shallow one possibly due to the pre-eruptive ascent of magma. Similar reservoir depths at Llaima have been confirmed by independent petrologic studies. These reservoirs are interpreted to be temporally coupled. At Tend{\"u}rek volcano I have found long-term subsidence of the volcanic edifice, which can be described by a large, magmatic, sill-like source that is subject to cooling contraction. The displacement data in conjunction with high-resolution optical images, however, reveal arcuate fractures at the eastern and western flank of the volcano. These are most likely the surface expressions of concentric ring-faults around the volcanic edifice that show low magnitudes of slip over a long time. This might be an alternative mechanism for the development of large caldera structures, which are so far assumed to be generated during large catastrophic collapse events. To investigate the potential subsurface geometry and relation of the two proposed interacting sources at Tend{\"u}rek, a sill-like magmatic source and ring-faults, I have performed a more sophisticated numerical modeling approach. The optimum source geometries show, that the size of the sill-like source was overestimated in the simple models and that it is difficult to determine the dip angle of the ring-faults with surface displacement data only. However, considering physical and geological criteria a combination of outward-dipping reverse faults in the west and inward-dipping normal faults in the east seem to be the most likely. Consequently, the underground structure at the Tend{\"u}rek volcano consists of a small, sill-like, contracting, magmatic source below the western summit crater that causes a trapdoor-like faulting along the ring-faults around the volcanic edifice. Therefore, the magmatic source and the ring-faults are also interpreted to be temporally coupled. In addition, a method for data reduction has been improved. The modeling of subsurface deformation sources requires only a relatively small number of well distributed InSAR observations at the earth's surface. Satellite radar images, however, consist of several millions of these observations. Therefore, the large amount of data needs to be reduced by several orders of magnitude for source modeling, to save computation time and increase model flexibility. I have introduced a model-based subsampling approach in particular for heterogeneously-distributed observations. It allows a fast calculation of the data error variance-covariance matrix, also supports the modeling of time dependent displacement data and is, therefore, an alternative to existing methods.},
  language  = {en}
}
@phdthesis{Grigoli2014,
  author    = {Grigoli, Francesco},
  title     = {Automated seismic event location by waveform coherence analysis},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70329},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Automated location of seismic events is a very important task in microseismic monitoring operations as well for local and regional seismic monitoring. Since microseismic records are generally characterised by low signal-to-noise ratio, such methods are requested to be noise robust and sufficiently accurate. Most of the standard automated location routines are based on the automated picking, identification and association of the first arrivals of P and S waves and on the minimization of the residuals between theoretical and observed arrival times of the considered seismic phases. Although current methods can accurately pick P onsets, the automatic picking of the S onset is still problematic, especially when the P coda overlaps the S wave onset. In this thesis I developed a picking free automated method based on the Short-Term-Average/Long-Term-Average (STA/LTA) traces at different stations as observed data. I used the STA/LTA of several characteristic functions in order to increase the sensitiveness to the P wave and the S waves. For the P phases we use the STA/LTA traces of the vertical energy function, while for the S phases, we use the STA/LTA traces of the horizontal energy trace and then a more optimized characteristic function which is obtained using the principal component analysis technique. The orientation of the horizontal components can be retrieved by robust and linear approach of waveform comparison between stations within a network using seismic sources outside the network (chapter 2). To locate the seismic event, we scan the space of possible hypocentral locations and origin times, and stack the STA/LTA traces along the theoretical arrival time surface for both P and S phases. Iterating this procedure on a three-dimensional grid we retrieve a multidimensional matrix whose absolute maximum corresponds to the spatial and temporal coordinates of the seismic event. Location uncertainties are then estimated by perturbing the STA/LTA parameters (i.e the length of both long and short time windows) and relocating each event several times. In order to test the location method I firstly applied it to a set of 200 synthetic events. Then we applied it to two different real datasets. A first one related to mining induced microseismicity in a coal mine in the northern Germany (chapter 3). In this case we successfully located 391 microseismic event with magnitude range between 0.5 and 2.0 Ml. To further validate the location method I compared the retrieved locations with those obtained by manual picking procedure. The second dataset consist in a pilot application performed in the Campania-Lucania region (southern Italy) using a 33 stations seismic network (Irpinia Seismic Network) with an aperture of about 150 km (chapter 4). We located 196 crustal earthquakes (depth < 20 km) with magnitude range 1.1 < Ml < 2.7. A subset of these locations were compared with accurate locations retrieved by a manual location procedure based on the use of a double difference technique. In both cases results indicate good agreement with manual locations. Moreover, the waveform stacking location method results noise robust and performs better than classical location methods based on the automatic picking of the P and S waves first arrivals.},
  language  = {en}
}