@phdthesis{Samereier2011,
  author    = {Samereier, Matthias},
  title     = {Functional analyses of microtubule and centrosome-associated proteins in Dictyostelium discoideum},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52835},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Understanding the role of microtubule-associated proteins is the key to understand the complex mechanisms regulating microtubule dynamics. This study employs the model system Dictyostelium discoideum to elucidate the role of the microtubule-associated protein TACC (Transforming acidic coiled-coil) in promoting microtubule growth and stability. Dictyostelium TACC was localized at the centrosome throughout the entire cell cycle. The protein was also detected at microtubule plus ends, however, unexpectedly only during interphase but not during mitosis. The same cell cycle-dependent localization pattern was observed for CP224, the Dictyostelium XMAP215 homologue. These ubiquitous MAPs have been found to interact with TACC proteins directly and are known to act as microtubule polymerases and nucleators. This work shows for the first time in vivo that both a TACC and XMAP215 family protein can differentially localize to microtubule plus ends during interphase and mitosis. RNAi knockdown mutants revealed that TACC promotes microtubule growth during interphase and is essential for proper formation of astral microtubules in mitosis. In many organisms, impaired microtubule stability upon TACC depletion was explained by the failure to efficiently recruit the TACC-binding XMAP215 protein to centrosomes or spindle poles. By contrast, fluorescence recovery after photobleaching (FRAP) analyses conducted in this study demonstrate that in Dictyostelium recruitment of CP224 to centrosomes or spindle poles is not perturbed in the absence of TACC. Instead, CP224 could no longer be detected at the tips of microtubules in TACC mutant cells. This finding demonstrates for the first time in vivo that a TACC protein is essential for the association of an XMAP215 protein with microtubule plus ends. The GFP-TACC strains generated in this work also turned out to be a valuable tool to study the unusual microtubule dynamics in Dictyostelium. Here, microtubules exhibit a high degree of lateral bending movements but, in contrast most other organisms, they do not obviously undergo any growth or shrinkage events during interphase. Despite of that they are affected by microtubuledepolymerizing drugs such as thiabendazole or nocodazol which are thought to act solely on dynamic microtubules. Employing 5D-fluorescence live cell microscopy and FRAP analyses this study suggests Dictyostelium microtubules to be dynamic only in the periphery, while they are stable at the centrosome. In the recent years, the identification of yet unknown components of the Dictyostelium centrosome has made tremendous progress. A proteomic approach previously conducted by our group disclosed several uncharacterized candidate proteins, which remained to be verified as genuine centrosomal components. The second part of this study focuses on the investigation of three such candidate proteins, Cenp68, CP103 and the putative spindle assembly checkpoint protein Mad1. While a GFP-CP103 fusion protein could clearly be localized to isolated centrosomes that are free of microtubules, Cenp68 and Mad1 were found to associate with the centromeres and kinetochores, respectively. The investigation of Cenp68 included the generation of a polyclonal anti-Cenp68 antibody, the screening for interacting proteins and the generation of knockout mutants which, however, did not display any obvious phenotype. Yet, Cenp68 has turned out as a very useful marker to study centromere dynamics during the entire cell cycle. During mitosis, GFP-Mad1 localization strongly resembled the behavior of other Mad1 proteins, suggesting the existence of a yet uncharacterized spindle assembly checkpoint in Dictyostelium.},
  language  = {en}
}
@book{SmirnovZamaniFarahaniWeske2011,
  author    = {Smirnov, Sergey and Zamani Farahani, Armin and Weske, Mathias},
  title     = {State propagation in abstracted business processes},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-130-1},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51480},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {16},
  year      = {2011},
  abstract  = {Business process models are abstractions of concrete operational procedures that occur in the daily business of organizations. To cope with the complexity of these models, business process model abstraction has been introduced recently. Its goal is to derive from a detailed process model several abstract models that provide a high-level understanding of the process. While techniques for constructing abstract models are reported in the literature, little is known about the relationships between process instances and abstract models. In this paper we show how the state of an abstract activity can be calculated from the states of related, detailed process activities as they happen. The approach uses activity state propagation. With state uniqueness and state transition correctness we introduce formal properties that improve the understanding of state propagation. Algorithms to check these properties are devised. Finally, we use behavioral profiles to identify and classify behavioral inconsistencies in abstract process models that might occur, once activity state propagation is used.},
  language  = {en}
}
@book{HauptMarrHirschfeld2011,
  author    = {Haupt, Michael and Marr, Stefan and Hirschfeld, Robert},
  title     = {CSOM/PL : a virtual machine product line},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-134-9},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52332},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {26},
  year      = {2011},
  abstract  = {CSOM/PL is a software product line (SPL) derived from applying multi-dimensional separation of concerns (MDSOC) techniques to the domain of high-level language virtual machine (VM) implementations. For CSOM/PL, we modularised CSOM, a Smalltalk VM implemented in C, using VMADL (virtual machine architecture description language). Several features of the original CSOM were encapsulated in VMADL modules and composed in various combinations. In an evaluation of our approach, we show that applying MDSOC and SPL principles to a domain as complex as that of VMs is not only feasible but beneficial, as it improves understandability, maintainability, and configurability of VM implementations without harming performance.},
  language  = {en}
}
@phdthesis{Schumacher2011,
  author    = {Schumacher, Soeren},
  title     = {Saccharide recognition : boronic acids as receptors in polymeric networks},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52869},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In this thesis entitled "Saccharide Recognition - Boronic acids as Receptors in Polymeric Networks" different aspects of boronic acid synthesis, their analysis and incorporation or attachment to different polymeric networks and characterisation thereof were investigated. The following key aspects were considered: • Provision of a variety of different characterised arylboronic acids and benzoboroxoles • Attachment of certain derivatives to nanoparticles and the characterisation of saccharide binding by means of isothermal titration calorimetry and displacement assay (ARS) to enhance the association constant to saccharides at pH 7.4 • Enhancement of selectivity in polymeric systems by means of molecular imprinting using fructose as template and a polymerisable benzoboroxole as functional monomer for the recognition at pH 7.4 (Joined by a diploma thesis of F. Gr{\"u}neberger) • Development of biomimetic saccharide structures and the development of saccharide (especially glucose and fructose) binding MIPs by using these structures as template molecules. In the first part of the thesis different arylboronic acid derivatives were synthesised and their binding to glucose or fructose was investigated by means of isothermal titration calorimetry (ITC). It could be derived, which is in parallel to the literature, that derivatives bearing a methylhydroxyl-group in ortho-position to the boron (benzoboroxole) exhibit in most cases a two-fold higher association constant compared to the corresponding phenylboronic acid derivative. To gain a deeper understanding NMR spectroscopy and mass spectrometry with the benzoboroxole and glucose or fructose was performed. It could be shown that the exchange rate in terms of NMR time scale is quite slow since in titration experiments new peaks appeared. Via mass spectrometry of a mixture between benzoboroxole and glucose or fructose, different binding stoichiometries could be detected showing that the binding of saccharides is comparable with their binding to phenylboronic acid. In addition, the use of Alizarin Red S as an electrochemical reporter was described for the first time to monitor the saccharide binding to arylboronic acids not only with spectroscopy. Here, the redox behaviour and the displacement were recorded by cyclic voltammograms. In the second part different applications of boronic acids in polymeric networks were investigated. The attachment of benzoboroxoles to nanoparticles was investigated and monitored by means of isothermal titration calorimetry and a colourimetric assay with Alizarin Red S as the report dye. The investigations by isothermal titration calorimetry compared the fructose binding of arylboronic acids and benzoboroxoles coupled to these nanoparticles and "free" in solution. It could be shown that the attached derivatives showed a higher binding constant due to an increasing entropy term. This states for possible multivalent binding combined with a higher water release. Since ITC could not characterise the binding of glucose to these nanoparticles due to experimental restrictions the glucose binding at pH 7.4 was shown with ARS. Here, the displacement of ARS by fructose and also glucose could be followed and consequently these nanoparticles can be used for saccharide determination. Within this investigation also the temperature stability of these nanoparticles was examined and after normal sterilisation procedures (121°C, 20 min.) the binding behaviour was still unchanged. To target the selectivity of the used polymeric networks, molecular imprinting was used as a technique for creating artificial binding pockets on a molecular scale. As functional monomer 3-methacrylamidobenzoboroxole was introduced for the recognition of fructose. In comparison to polymers prepared with vinylphenylboronic acid the benzoboroxole containing polymer had a stronger binding at pH 7.4 which was shown for the first time. In addition, another imprinted polymer was synthesised especially for the recognition of glucose and fructose employing biomimetic saccharide analogues as template molecule. The advantage to use the saccharide analogues is the defined template-functional monomer complex during the polymerisation which is not the case, for example, for glucose-boronic acid interaction. The biomimetic character was proven through structural superimposition of crystal structures of the analogues with already described crystal structures of boronic acid esters of glucose and fructose. A molecularly imprinted polymer was synthesised with vinylphenylboronic acid as the functional monomer to show that both glucose and fructose are able to bind to the polymer which was predicted by the structural similarity of the analogues. The major scientific contributions of this thesis are • the determination of binding constants for some, not yet reported saccharide - boronic acid / benzoboroxole pairs, • the use of ARS as electrochemical reporter for saccharide detection, • the thermodynamic characterisation of a saccharide binding nanoparticle system containing benzoboroxole and functioning at pH 7.4, • the use of a polymerisable benzoboroxole as functional monomer for saccharide recognition in neutral, aqueous environments • and the synthesis and utilisation of biomimetic saccharide analogues as template molecules especially for the development of a glucose binding MIP.},
  language  = {en}
}
@phdthesis{Wischnewski2011,
  author    = {Wischnewski, Juliane},
  title     = {Reconstructing climate variability on the Tibetan Plateau : comparing aquatic and terrestrial signals},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52453},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Spatial and temporal temperature and moisture patterns across the Tibetan Plateau are very complex. The onset and magnitude of the Holocene climate optimum in the Asian monsoon realm, in particular, is a subject of considerable debate as this time period is often used as an analogue for recent global warming. In the light of contradictory inferences regarding past climate and environmental change on the Tibetan Plateau, I have attempted to explain mismatches in the timing and magnitude of change. Therefore, I analysed the temporal variation of fossil pollen and diatom spectra and the geochemical record from palaeo-ecological records covering different time scales (late Quaternary and the last 200 years) from two core regions in the NE and SE Tibetan Plateau. For interpretation purposes I combined my data with other available palaeo-ecological data to set up corresponding aquatic and terrestrial proxy data sets of two lake pairs and two sets of sites. I focused on the direct comparison of proxies representing lacustrine response to climate signals (e.g., diatoms, ostracods, geochemical record) and proxies representing changes in the terrestrial environment (i.e., terrestrial pollen), in order to asses whether the lake and its catchments respond at similar times and magnitudes to environmental changes. Therefore, I introduced the established numerical technique procrustes rotation as a new approach in palaeoecology to quantitatively compare raw data of any two sedimentary records of interest in order to assess their degree of concordance. Focusing on the late Quaternary, sediment cores from two lakes (Kuhai Lake 35.3°N; 99.2°E; 4150 m asl; and Koucha Lake 34.0°N; 97.2°E; 4540 m asl) on the semi-arid northeastern Tibetan Plateau were analysed to identify post-glacial vegetation and environmental changes, and to investigate the responses of lake ecosystems to such changes. Based on the pollen record, five major vegetation and climate changes could be identified: (1) A shift from alpine desert to alpine steppe indicates a change from cold, dry conditions to warmer and more moist conditions at 14.8 cal. ka BP, (2) alpine steppe with tundra elements points to conditions of higher effective moisture and a stepwise warming climate at 13.6 cal. ka BP, (3) the appearance of high-alpine meadow vegetation indicates a further change towards increased moisture, but with colder temperatures, at 7.0 cal. ka BP, (4) the reoccurrence of alpine steppe with desert elements suggests a return to a significantly colder and drier phase at 6.3 cal. ka BP, and (5) the establishment of alpine steppe-meadow vegetation indicates a change back to relatively moist conditions at 2.2 cal. ka BP. To place the reconstructed climate inferences from the NE Tibetan Plateau into the context of Holocene moisture evolution across the Tibetan Plateau, I applied a five-scale moisture index and average link clustering to all available continuous pollen and non-pollen palaeoclimate records from the Tibetan Plateau, in an attempt to detect coherent regional and temporal patterns of moisture evolution on the Plateau. However, no common temporal or spatial pattern of moisture evolution during the Holocene could be detected, which can be assigned to the complex responses of different proxies to environmental changes in an already very heterogeneous mountain landscape, where minor differences in elevation can result in marked variations in microenvironments. Focusing on the past 200 years, I analysed the sedimentary records (LC6 Lake 29.5°N, 94.3°E, 4132 m asl; and Wuxu Lake 29.9°N, 101.1°E, 3705 m asl) from the southeastern Tibetan Plateau. I found that despite presumed significant temperature increases over that period, pollen and diatom records from the SE Tibetan Plateau reveal only very subtle changes throughout their profiles. The compositional species turnover investigated over the last 200 years appears relatively low in comparison to the species reorganisations during the Holocene. The results indicate that climatically induced ecological thresholds are not yet crossed, but that human activity has an increasing influence, particularly on the terrestrial ecosystem. Forest clearances and reforestation have not caused forest decline in our study area, but a conversion of natural forests to semi-natural secondary forests. The results from the numerical proxy comparison of the two sets of two pairs of Tibetan lakes indicate that the use of different proxies and the work with palaeo-ecological records from different lake types can cause deviant stories of inferred change. Irrespective of the timescale (Holocene or last 200 years) or region (SE or NE Tibetan Plateau) analysed, the agreement in terms of the direction, timing, and magnitude of change between the corresponding terrestrial data sets is generally better than the match between the corresponding lacustrine data sets, suggesting that lacustrine proxies may partly be influenced by in-lake or local catchment processes whereas the terrestrial proxy reflects a more regional climatic signal. The current disaccord on coherent temporal and spatial climate patterns on the Tibetan Plateau can partly be ascribed to the complexity of proxy response and lake systems on the Tibetan Plateau. Therefore, a multi-proxy, multi-site approach is important in order to gain a reliable climate interpretation for the complex mountain landscape of the Tibetan Plateau.},
  language  = {en}
}
@phdthesis{Kopetzki2011,
  author    = {Kopetzki, Daniel},
  title     = {Exploring hydrothermal reactions : from prebiotic synthesis to green chemistry},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52581},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In this thesis chemical reactions under hydrothermal conditions were explored, whereby emphasis was put on green chemistry. Water at high temperature and pressure acts as a benign solvent. Motivation to work under hydrothermal conditions was well-founded in the tunability of physicochemical properties with temperature, e.g. of dielectric constant, density or ion product, which often resulted in surprising reactivity. Another cornerstone was the implementation of the principles of green chemistry. Besides the use of water as solvent, this included the employment of a sustainable feedstock and the sensible use of resources by minimizing waste and harmful intermediates and additives. To evaluate the feasibility of hydrothermal conditions for chemical synthesis, exemplary reactions were performed. These were carried out in a continuous flow reactor, allowing for precise control of reaction conditions and kinetics measurements. In most experiments a temperature of 200 °C in combination with a pressure of 100 bar was chosen. In some cases the temperature was even raised to 300 °C. Water in this subcritical range can also be found in nature at hydrothermal vents on the ocean floor. On the primitive earth, environments with such conditions were however present in larger numbers. Therefore we tested whether biologically important carbohydrates could be formed at high temperature from the simple, probably prebiotic precursor formaldehyde. Indeed, this formose reaction could be carried out successfully, although the yield was lower compared to the counterpart reaction under ambient conditions. However, striking differences regarding selectivity and necessary catalysts were observed. At moderate temperatures bases and catalytically active cations like Ca2+ are necessary and the main products are hexoses and pentoses, which accumulate due to their higher stability. In contrast, in high-temperature water no catalyst was necessary but a slightly alkaline solution was sufficient. Hexoses were only formed in negligible amounts, whereas pentoses and the shorter carbohydrates accounted for the major fraction. Amongst the pentoses there was some preference for the formation of ribose. Even deoxy sugars could be detected in traces. The observation that catalysts can be avoided was successfully transferred to another reaction. In a green chemistry approach platform chemicals must be produced from sustainable resources. Carbohydrates can for instance be employed as a basis. They can be transformed to levulinic acid and formic acid, which can both react via a transfer hydrogenation to the green solvent and biofuel gamma-valerolactone. This second reaction usually requires catalysis by Ru or Pd, which are neither sustainable nor low-priced. Under hydrothermal conditions these heavy metals could be avoided and replaced by cheap salts, taking advantage of the temperature dependence of the acid dissociation constant. Simple sulfate was recognized as a temperature switchable base. With this additive high yield could be achieved by simultaneous prevention of waste. In contrast to conventional bases, which create salt upon neutralization, a temperature switchable base becomes neutral again when cooled down and thus can be reused. This adds another sustainable feature to the high atom economy of the presented hydrothermal synthesis. In a last study complex decomposition pathways of biomass were investigated. Gas chromatography in conjunction with mass spectroscopy has proven to be a powerful tool for the identification of unknowns. It was observed that several acids were formed when carbohydrates were treated with bases at high temperature. This procedure was also applied to digest wood. Afterwards it was possible to fermentate the solution and a good yield of methane was obtained. This has to be regarded in the light of the fact that wood practically cannot be used as a feedstock in a biogas factory. Thus the hydrothermal pretreatment is an efficient means to employ such materials as well. Also the reaction network of the hydrothermal decomposition of glycine was investigated using isotope-labeled compounds as comparison for the unambiguous identification of unknowns. This refined analysis allowed the identification of several new molecules and pathways, not yet described in literature. In summary several advantages could be taken from synthesis in high-temperature water. Many catalysts, absolutely necessary under ambient conditions, could either be completely avoided or replaced by cheap, sustainable alternatives. In this respect water is not only a green solvent, but helps to prevent waste and preserves resources.},
  language  = {en}
}
@phdthesis{Boehme2011,
  author    = {B{\"o}hme, Dimo},
  title     = {EU-Russia energy relations: What chance for solutions? : A focus on the natural gas sector},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-120-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-50210},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xix, 322},
  year      = {2011},
  abstract  = {Public debate about energy relations between the EU and Russia is distorted. These distortions present considerable obstacles to the development of true partnership. At the core of the conflict is a struggle for resource rents between energy producing, energy consuming and transit countries. Supposed secondary aspects, however, are also of great importance. They comprise of geopolitics, market access, economic development and state sovereignty. The European Union, having engaged in energy market liberalisation, faces a widening gap between declining domestic resources and continuously growing energy demand. Diverse interests inside the EU prevent the definition of a coherent and respected energy policy. Russia, for its part, is no longer willing to subsidise its neighbouring economies by cheap energy exports. The Russian government engages in assertive policies pursuing Russian interests. In so far, it opts for a different globalisation approach, refusing the role of mere energy exporter. In view of the intensifying struggle for global resources, Russia, with its large energy potential, appears to be a very favourable option for European energy supplies, if not the best one. However, several outcomes of the strategic game between the two partners can be imagined. Engaging in non-cooperative strategies will in the end leave all stakeholders worse-off. The European Union should therefore concentrate on securing its partnership with Russia instead of damaging it. Stable cooperation would need the acceptance that the partner may pursue his own goals, which might be different from one's own interests. The question is, how can a sustainable compromise be found? This thesis finds that a mix of continued dialogue, a tit for tat approach bolstered by an international institutional framework and increased integration efforts appears as a preferable solution.},
  language  = {en}
}
@phdthesis{Reusser2011,
  author    = {Reusser, Dominik Edwin},
  title     = {Combining smart model diagnostics and effective data collection for snow catchments},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52574},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80\% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment.},
  language  = {en}
}
@book{OPUS4-5053,
  title     = {Proceedings of the 5th Ph.D. Retreat of the HPI Research School on Service-oriented Systems Engineering},
  editor    = {Meinel, Christoph and Plattner, Hasso and D{\"o}llner, J{\"u}rgen Roland Friedrich and Weske, Mathias and Polze, Andreas and Hirschfeld, Robert and Naumann, Felix and Giese, Holger},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-129-5},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51472},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {II, 228},
  year      = {2011},
  language  = {en}
}
@phdthesis{Naaf2011,
  author    = {Naaf, Tobias},
  title     = {Floristic homogenization and impoverishment : herb layer changes over two decades in deciduous forest patches of the Weser-Elbe region (NW Germany)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52446},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Human-induced alterations of the environment are causing biotic changes worldwide, including the extinction of species and a mixing of once disparate floras and faunas. One type of biological communities that is expected to be particularly affected by environmental alterations are herb layer plant communities of fragmented forests such as those in the west European lowlands. However, our knowledge about current changes in species diversity and composition in these communities is limited due to a lack of adequate long-term studies. In this thesis, I resurveyed the herb layer communities of ancient forest patches in the Weser-Elbe region (NW Germany) after two decades using 175 semi-permanent plots. The general objectives were (i) to quantify changes in plant species diversity considering also between-community (β) and functional diversity, (ii) to determine shifts in species composition in terms of species' niche breadth and functional traits and (iii) to find indications on the most likely environmental drivers for the observed changes. These objectives were pursued with four independent research papers (Chapters 1-4) whose results were brought together in a General Discussion. Alpha diversity (species richness) increased by almost four species on average, whereas β diversity tended to decrease (Chapter 1). The latter is interpreted as a beginning floristic homogenization. The observed changes were primarily the result of a spread of native habitat generalists that are able to tolerate broad pH and moisture ranges. The changes in α and β diversity were only significant when species abundances were neglected (Chapters 1 and 2), demonstrating that the diversity changes resulted mainly from gains and losses of low-abundance species. This study is one of the first studies in temperate Europe that demonstrates floristic homogenization of forest plant communities at a larger than local scale. The diversity changes found at the taxonomic level did not result in similar changes at the functional level (Chapter 2). The likely reason is that these communities are functionally "buffered". Single communities involve most of the functional diversity of the regional pool, i.e., they are already functionally rich, while they are functionally redundant among each other, i.e., they are already homogeneous. Independent of taxonomic homogenization, the abundance of 30 species decreased significantly (Chapter 4). These species included 12 ancient forest species (i.e., species closely tied to forest patches with a habitat continuity > 200 years) and seven species listed on the Red List of endangered plant species in NW Germany. If these decreases continue over the next decades, local extinctions may result. This biotic impoverishment would seriously conflict with regional conservation goals. Community assembly mechanisms changed at the local level particularly at sites that experienced disturbance by forest management activities between the sampling periods (Chapter 3). Disturbance altered community assembly mechanisms in two ways: (i) it relaxed environmental filters and allowed the coexistence of different reproduction strategies, as reflected by a higher diversity of reproductive traits at the time of the resurvey, and (ii) it enhanced light availability and tightened competitive filters. These limited the functional diversity with respect to canopy height and selected for taller species. Thirty-one winner and 30 loser species, which had significantly increased or decreased in abundance, respectively, were characterized by various functional traits and ecological performances to find indications on the most likely environmental drivers for the observed floristic changes (Chapter 4). Winner species had higher seed longevity, flowered later in the season and had more often an oceanic distribution compared to loser species. Loser species tended to have a higher specific leaf area, to be more susceptible to deer browsing and to have a performance optimum at higher soil pH values compared to winner species. Multiple logistic regression analyses indicated that disturbances due to forest management interventions were the primary cause of the species shifts. As one of the first European resurvey studies, this study provides indications that an enhanced browsing pressure due to increased deer densities and increasingly warmer winters are important drivers. The study failed to demonstrate that eutrophication and acidification due to atmospheric deposition substantially drive herb layer changes. The restriction of the sample to the most base-rich sites in the region is discussed as a likely reason. Furthermore, the decline of several ancient forest species is discussed as an indication that the forest patches are still paying off their "extinction debt", i.e., exhibit a delayed response to forest fragmentation.},
  language  = {en}
}