@misc{NeumannHorstkemperKruegeretal.2002, author = {Neumann, Bernhard and Horstkemper, Marianne and Kr{\"u}ger, Wolfgang and Wilkens, Martin and Bohlen, Andreas and Fr{\"u}bing, Peter and Wegener, Michael and Scheff, Ullrich and Neher, Dieter and Brehmer, Ludwig and Kleinpeter, Erich and Wolf, Gunter and Koetz, Joachim and Peter, Martin G. and Senkbeil, Sigrid and Meyer, Till}, title = {Portal = Im Trend: Physiker und Chemiker erforschen "Soft Matter"}, volume = {2002}, issn = {1618-6893}, doi = {10.25932/publishup-50144}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-501441}, pages = {40}, year = {2002}, abstract = {Aus dem Inhalt: Im Trend: Physiker und Chemiker erforschen „Soft Matter" -Brandenburger Netzwerk f{\"u}r Existenzgr{\"u}nder erh{\"a}lt F{\"o}rderung -Universit{\"a}t leistet Beitrag zum Romantik-Jahr -Musiksender MTV und Bryan Adams auf dem Campus}, language = {de} } @article{FloresSuarezMellingerWegeneretal.2006, author = {Flores Su{\´a}rez, Rosaura and Mellinger, Axel and Wegener, Michael and Wirges, Werner and Gerhard, Reimund and Singh, Rajeev}, title = {Thermal-pulse tomography of polarization distributions in a cylindrical geometry}, series = {IEEE transactions on dielectrics and electrical insulation}, volume = {13}, journal = {IEEE transactions on dielectrics and electrical insulation}, number = {5}, publisher = {IEEE}, address = {Piscataway}, issn = {1070-9878}, doi = {10.1109/TDEI.2006.258210}, pages = {1030 -- 1035}, year = {2006}, abstract = {Fast, three-dimensional polarization mapping in piezoelectric sensor cables was performed by means of the novel thermal-pulse tomography (TPT) technique with a lateral resolution of 200 mum. The active piezoelectric cable material (a copolymer of polyvinylidene fluoride with trifluoroethylene) was electrically poled with a point-to-cable corona discharge. A focused laser was employed to heat the opaque outer electrode, and the short-circuit current generated by the thermal pulse was used to obtain 3D polarization maps via the scale transformation method. The article describes the TPT technique as a fast non-destructive option for studying cylindrical geometries.}, language = {en} } @article{RyabchunKolloscheWegeneretal.2016, author = {Ryabchun, Alexander and Kollosche, Matthias and Wegener, Michael and Sakhno, Oksana}, title = {Holographic Structuring of Elastomer Actuator: First True Monolithic Tunable Elastomer Optics}, series = {Advanced materials}, volume = {28}, journal = {Advanced materials}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0935-9648}, doi = {10.1002/adma.201602881}, pages = {10217 -- 10223}, year = {2016}, abstract = {Volume diffraction gratings (VDGs) are inscribed selectively by diffusive introduction of benzophenone and subsequent UV-holographic structuring into an electroactive dielectric elastomer actuator (DEA), to afford a continuous voltage-controlled grating shift of 17\%. The internal stress coupling of DEA and optical domain allows for a new generation of true monolithic tunable elastomer optics with voltage controlled properties.}, language = {en} } @article{KussmaulRisseKofodetal.2011, author = {Kussmaul, Bjoern and Risse, Sebastian and Kofod, Guggi and Wache, Remi and Wegener, Michael and McCarthy, Denis N. and Kr{\"u}ger, Hartmut and Gerhard, Reimund}, title = {Enhancement of dielectric permittivity and electromechanical response in silicone elastomers molecular grafting of organic dipoles to the macromolecular Network}, series = {Advanced functional materials}, volume = {21}, journal = {Advanced functional materials}, number = {23}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1616-301X}, doi = {10.1002/adfm.201100884}, pages = {4589 -- 4594}, year = {2011}, abstract = {A novel method is established for permittivity enhancement of a silicone matrix for dielectric elastomer actuators (DEAs) by molecular level modifications of the elastomer matrix. A push-pull dipole is synthesized to be compatible with the silicone crosslinking chemistry, allowing for direct grafting to the crosslinker molecules in a one-step film formation process. This method prevents agglomeration and yields elastomer films that are homogeneous down to the molecular level. The dipole-to-silicone network grafting reaction is studied by FTIR. The chemical, thermal, mechanical and electrical properties of films with dipole contents ranging from 0 wt\% to 13.4 wt\% were thoroughly characterized. The grafting of dipoles modifies the relative permittivity and the stiffness, resulting in the actuation strain at a given electrical field being improved by a factor of six.}, language = {en} } @article{KussmaulRisseWegeneretal.2012, author = {Kussmaul, Bj{\"o}rn and Risse, Sebastian and Wegener, Michael and Kofod, Guggi and Kr{\"u}ger, Hartmut}, title = {Matrix stiffness dependent electro-mechanical response of dipole grafted silicones}, series = {Smart materials and structures}, volume = {21}, journal = {Smart materials and structures}, number = {6}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0964-1726}, doi = {10.1088/0964-1726/21/6/064005}, pages = {6}, year = {2012}, abstract = {The properties of dielectric elastomer actuators can be optimized by modifying the dielectric or mechanical properties of the dielectric elastomer. This paper presents the simultaneous control of both dielectric and mechanical properties, in a silicone elastomer network comprising cross-linker, chains and grafted molecular dipoles. Chains with two different molecular weights were each combined with varying amounts of grafted dipole. Chemical and physical characterization showed that networks with stoichiometric control of cross-linking density and permittivity were obtained, and that longer chain lengths resulted in higher electrical field response due to the reduction in cross-linking density and correspondingly in mechanical stiffness. Both actuation sensitivities were enhanced by 6.3 and 4.6 times for the short and long chain matrix material, respectively.}, language = {en} } @article{WirgesWegenerVoroninaetal.2007, author = {Wirges, Werner and Wegener, Michael and Voronina, Olena and Zirkel, Larissa and Gerhard, Reimund}, title = {Optimized preparation of elastically soft, highly piezoelectric, cellular ferroelectrets from nonvoided poly(ethylene terephthalate) films}, doi = {10.1002/adfm.200600162}, year = {2007}, abstract = {Electrically charged cellular polymer films can exhibit very high piezoelectric activity and are therefore more and more often employed in advanced electromechanical and electro-acoustical transducers. In this paper, we report an optimized sequence of steps for preparing such ferroelectrets from commercial nonvoided ploy(ethylene terephthalate) (PETP) films by means of foaming with CO2 biaxial mechanical stretching, controlled void inflation, and bipolar electric charging. The nonvoid PETP films foamed with supercritical CO2 at a suitably high pressure and subsequently annealed for stabilization. The cellular foam structure was further optimized by means of well controlled biaxial stretching in a commercial stretcher and sometimes subsequent inflamation in a pressure chamber. Bipolar electric charging of the internal voids was achieved through the application of high electric fields in an SF0 atmosphere. The new optimized PETP ferroelectric exhibit quite large piezoelectric coefficients up to almost 500 pCN(-1), for which unusually low elastic stiffness of only around 0.3 MPa are essential. The PETP foam ferroelectrics posses unclamped thickenss-extension resonance frequences between approximately 120 and 250 kHz, and are thus highly suitable for several established as well as novel ultrasonic-transductant applications.}, language = {en} } @article{WegenerWirgesGerhardetal.2004, author = {Wegener, Michael and Wirges, Werner and Gerhard, Reimund and Dansachm{\"u}ller, M. and Schw{\"o}diauer, R. and Bauer-Gogonea, Simona and Bauer, Siegfried and Paajanen, Mika and Minkkinen, Hannu and Raukola, J.}, title = {Controlled inflation of voids in cellular polymer ferroelectrets : optimizing electromechanical transducer properties}, year = {2004}, abstract = {When exposed to sufficiently high electric fields, polymer-foam electret materials with closed cells exhibit ferroelectric-like behavior and may therefore be called ferroelectrets. In cellular ferroelectrets, the influence of the cell size and shape distributions on the application-relevant properties is not yet understood. Therefore, controlled inflation experiments were carried out on cellular polypropylene films, and the resulting elastical and electromechanical parameters were determined. The elastic modulus in the thickness direction shows a minimum with a corresponding maximum in the electromechanical transducer coefficient. The resonance frequency shifts as a function of the elastic modulus and the relative density of the inflated cellular films. Therefore, the transducer properties of cellular ferroelectrets can be optimized by means of controlled inflation. (C) 2004 American Institute of Physics}, language = {en} } @article{SaarimaekiPaajanenSavijaervietal.2006, author = {Saarim{\"a}ki, Eetta and Paajanen, Mika and Savij{\"a}rvi, Ann-Mari and Minkkinen, Hannu and Wegener, Michael and Voronina, Olena and Schulze, Robert and Wirges, Werner and Gerhard, Reimund}, title = {Novel heat durable electromechanical film : processing for electromechanical and electret applications}, year = {2006}, abstract = {New ferroelectrets were developed on the basis of foams from cyclo-olefin polymers and copolymers. The results obtained on the cyclo-olefin polymer foam demonstrate a significant improvement of the service temperature for ferroelectret transducer materials. Suitable compounding and preparation led to cyclo-olefin ferroelectrets with an electromechanical activity of around 15 pC/N, which is thermally stable at least up to 110 degrees C. The properties in sensor and actuator applications are strongly dependent on the processing parameters related to film-making, sensor and actuator preparation, gas content and electric charging. The processing window for the film stretching was very narrow compared to the earlier developed polypropylene ferroelectrets. The film porosity, softness and thus the electromechanical activity are adjusted by gas-diffusion expansion. The activity of the electromechanically operating sensors and actuators was increased by stacking several layers of cellular cyclo-olefin film. For applications such as flat loudspeakers, the foamed films are tuned by tensioning them on a support frame. Correct tensioning was essential also for reducing the distortion levels.}, language = {en} } @article{GrecoWangWegener2010, author = {Greco, Tonino and Wang, Feipeng and Wegener, Michael}, title = {Multifunctional silver poly(vinylidene fluoride) nanocomposites : nanoparticle synthesis, film processing, and structural characterization}, issn = {0015-0193}, doi = {10.1080/00150193.2010.482896}, year = {2010}, abstract = {Scope of this work was the synthesis of homogeneously dispersed silver nanoparticles in the ferroelectric polymer poly(vinylidene fluoride) (PVDF) and the study of the resulting properties affecting both the electro-active matrix and the optically-active nanofiller. In the nanocomposites surface plasmon resonances can be tuned across the UV- vis to the NIR spectral range. From IR spectra and DSC measurements it is concluded that the - to -phase transformation is observed and no degradation of the polymer matrix occurs. Finally, electrical poling was performed in order to investigate the influence of the embedded silver particles on the polarization behavior of the ferroelectric polymer.}, language = {en} } @article{WangFruebingWirgesetal.2010, author = {Wang, Feipeng and Fr{\"u}bing, Peter and Wirges, Werner and Gerhard, Reimund and Wegener, Michael}, title = {Enhanced Polarization in Melt-quenched and Stretched Poly(vinylidene Fluoride-Hexafluoropropylene) Films}, issn = {1070-9878}, doi = {10.1109/TDEI.2010.5539679}, year = {2010}, abstract = {beta-phase poly(vinylidene fluoride-hexafluoropropylene) (P(VDF-HFP)) copolymer films were prepared by uniaxially stretching solution-cast or melt-quenched samples. Different preparation routes lead to different amounts of the crystalline alpha and beta phases in the films, as detected by means of Fourier-transform infrared spectroscopy and X-ray diffractometry. The beta phase is significantly enhanced in melt-quenched and stretched films in comparison to solution-cast and stretched films. This is particularly true for copolymer samples with higher HFP content. The beta- phase enhancement is also observed in ferroelectric-hysteresis experiments where a rather high polarization of 58 mC/ m(2) was found on melt-quenched and stretched samples after poling at electric fields of 140 MV/m. After poling at 160 MV/m, one of these samples exhibited a piezoelectric d(33) coefficient as high as 21 pC/N. An electric-field-induced partial transition from the alpha to the beta phase was also observed on the melt-quenched and stretched samples. This effect leads to a further increase in the applications-relevant dipole polarization. Uniaxially stretched ferroelectric- polymer films are highly anisotropic. Dielectric resonance spectroscopy reveals a strong increase of the transverse piezoelectric d(32) coefficient and a strong decrease of the transverse elastic modulus c(32) upon heating from 20 to 50 degrees C.}, language = {en} }