@phdthesis{Skiba2024,
  author    = {Skiba, Vanessa},
  title     = {Alpine speleothems as recorders of glacier evolution},
  doi       = {10.25932/publishup-65537},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-655379},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xx, 238},
  year      = {2024},
  abstract  = {The European Alps are amongst the regions with highest glacier mass loss rates over the last decades. Under the threat of ongoing climate change, the ability to predict glacier mass balance changes for water and risk management purposes has become imperative. This raises an urgent need for reliable glacier models. The European Alps do not only host glaciers, but also numerous caves containing carbonate formations, called speleothems. Previous studies have shown that those speleothems also grew during times when the cave was covered by a warm-based glacier. In this thesis, I utilise speleothems from the European Alps as archives of local, environmental conditions related to mountain glacier evolution. Previous studies have shown that speleothem isotope data from the Alps can be strongly affected by in-cave processes. Therefore, part of this thesis focusses on developing an isotope evolution model, which successfully reproduces differences between contemporaneous growing speleothems. The model is used to propose correction approaches for prior calcite precipitation effects on speleothem oxygen isotopes (δ18O). Applications on speleothem records from caves outside of the Alps demonstrate that corrected δ18O agrees better with other records and climate model simulations. Existing speleothem growth histories and carbon isotope (δ13C) records from Alpine caves located at different elevations are used to infer soil vs. glacier cover and the thermal regime of the glacier over the last glacial cycle. The compatibility with glacier evolution models is statistically assessed. A general agreement between speleothem δ13C-derived information on soil vs. glacier presence and modelled glacier coverage is found. However, glacier retreat during Marine Isotope Stage (MIS) 3 seems to be underestimated by the model. Furthermore, speleothem data provides evidence of surface temperature above the freezing point which is, however, not fully reproduced by the simulations. History of glacier cover and their thermal regime is explored for the high-elevation cave system Melchsee-Frutt in the Swiss Alps. Based on new (MIS 9b - MIS 7b, MIS 2) and available speleothem δ13C (MIS 7a - 5d) data, warm-based glacier cover is inferred for MIS 8, 7d, 6, and 2. Also a short period of cold-based ice coverage is found for early MIS 6. In a detailed multi-proxy analysis (δ18O, δ13C, Mg/Ca and Sr/Ca), millennial-scale changes in the glacier-related source of the water infiltrating in the karst during MIS 8 and 7d are found and linked to Northern Hemisphere climate variability. While speleothem records from high-elevation cave sites in the Alps exhibit huge potential for glacier reconstruction, several limitations remain, which are discussed throughout this thesis. Ultimately, recommendations are given to further leverage subglacial speleothems as an archive of glacier dynamics.},
  language  = {en}
}
@phdthesis{Heckenbach2024,
  author    = {Heckenbach, Esther Lina},
  title     = {Geodynamic modeling of process interactions at continental plate boundaries},
  doi       = {10.25932/publishup-64750},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-647500},
  school      = {Universit{\"a}t Potsdam},
  pages     = {127},
  year      = {2024},
  abstract  = {Plate tectonic boundaries constitute the suture zones between tectonic plates. They are shaped by a variety of distinct and interrelated processes and play a key role in geohazards and georesource formation. Many of these processes have been previously studied, while many others remain unaddressed or undiscovered. In this work, the geodynamic numerical modeling software ASPECT is applied to shed light on further process interactions at continental plate boundaries. In contrast to natural data, geodynamic modeling has the advantage that processes can be directly quantified and that all parameters can be analyzed over the entire evolution of a structure. Furthermore, processes and interactions can be singled out from complex settings because the modeler has full control over all of the parameters involved. To account for the simplifying character of models in general, I have chosen to study generic geological settings with a focus on the processes and interactions rather than precisely reconstructing a specific region of the Earth. In Chapter 2, 2D models of continental rifts with different crustal thicknesses between 20 and 50 km and extension velocities in the range of 0.5-10 mm/yr are used to obtain a speed limit for the thermal steady-state assumption, commonly employed to address the temperature fields of continental rifts worldwide. Because the tectonic deformation from ongoing rifting outpaces heat conduction, the temperature field is not in equilibrium, but is characterized by a transient, tectonically-induced heat flow signal. As a result, I find that isotherm depths of the geodynamic evolution models are shallower than a temperature distribution in equilibrium would suggest. This is particularly important for deep isotherms and narrow rifts. In narrow rifts, the magnitude of the transient temperature signal limits a well-founded applicability of the thermal steady-state assumption to extension velocities of 0.5-2 mm/yr. Estimation of the crustal temperature field affects conclusions on all temperature-dependent processes ranging from mineral assemblages to the feasible exploitation of a geothermal reservoir. In Chapter 3, I model the interactions of different rheologies with the kinematics of folding and faulting using the example of fault-propagation folds in the Andean fold-and-thrust belt. The evolution of the velocity fields from geodynamic models are compared with those from trishear models of the same structure. While the latter use only geometric and kinematic constraints of the main fault, the geodynamic models capture viscous, plastic, and elastic deformation in the entire model domain. I find that both models work equally well for early, and thus relatively simple stages of folding and faulting, while results differ for more complex situations where off-fault deformation and secondary faulting are present. As fault-propagation folds can play an important role in the formation of reservoirs, knowledge of fluid pathways, for example via fractures and faults, is crucial for their characterization. Chapter 4 deals with a bending transform fault and the interconnections between tectonics and surface processes. In particular, the tectonic evolution of the Dead Sea Fault is addressed where a releasing bend forms the Dead Sea pull-apart basin, while a restraining bend further to the North resulted in the formation of the Lebanese mountains. I ran 3D coupled geodynamic and surface evolution models that included both types of bends in a single setup. I tested various randomized initial strain distributions, showing that basin asymmetry is a consequence of strain localization. Furthermore, by varying the surface process efficiency, I find that the deposition of sediment in the pull-apart basin not only controls basin depth, but also results in a crustal flow component that increases uplift at the restraining bend. Finally, in Chapter 5, I present the computational basis for adding further complexity to plate boundary models in ASPECT with the implementation of earthquake-like behavior using the rate-and-state friction framework. Despite earthquakes happening on a relatively small time scale, there are many interactions between the seismic cycle and the long time spans of other geodynamic processes. Amongst others, the crustal state of stress as well as the presence of fluids or changes in temperature may alter the frictional behavior of a fault segment. My work provides the basis for a realistic setup of involved structures and processes, which is therefore important to obtain a meaningful estimate for earthquake hazards. While these findings improve our understanding of continental plate boundaries, further development of geodynamic software may help to reveal even more processes and interactions in the future.},
  language  = {en}
}
@phdthesis{Pfalz2024,
  author    = {Pfalz, Gregor},
  title     = {Advancing knowledge of Arctic lake system dynamics: A data-driven perspective on spatiotemporal patterns},
  doi       = {10.25932/publishup-63655},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-636554},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 136},
  year      = {2024},
  abstract  = {Ecosystems play a pivotal role in addressing climate change but are also highly susceptible to drastic environmental changes. Investigating their historical dynamics can enhance our understanding of how they might respond to unprecedented future environmental shifts. With Arctic lakes currently under substantial pressure from climate change, lessons from the past can guide our understanding of potential disruptions to these lakes. However, individual lake systems are multifaceted and complex. Traditional isolated lake studies often fail to provide a global perspective because localized nuances—like individual lake parameters, catchment areas, and lake histories—can overshadow broader conclusions. In light of these complexities, a more nuanced approach is essential to analyze lake systems in a global context. A key to addressing this challenge lies in the data-driven analysis of sedimentological records from various northern lake systems. This dissertation emphasizes lake systems in the northern Eurasian region, particularly in Russia (n=59). For this doctoral thesis, we collected sedimentological data from various sources, which required a standardized framework for further analysis. Therefore, we designed a conceptual model for integrating and standardizing heterogeneous multi-proxy data into a relational database management system (PostgreSQL). Creating a database from the collected data enabled comparative numerical analyses between spatially separated lakes as well as between different proxies. When analyzing numerous lakes, establishing a common frame of reference was crucial. We achieved this by converting proxy values from depth dependency to age dependency. This required consistent age calculations across all lakes and proxies using one age-depth modeling software. Recognizing the broader implications and potential pitfalls of this, we developed the LANDO approach ("Linked Age and Depth Modelling"). LANDO is an innovative integration of multiple age-depth modeling software into a singular, cohesive platform (Jupyter Notebook). Beyond its ability to aggregate data from five renowned age-depth modeling software, LANDO uniquely empowers users to filter out implausible model outcomes using robust geoscientific data. Our method is not only novel but also significantly enhances the accuracy and reliability of lake analyses. Considering the preceding steps, this doctoral thesis further examines the relationship between carbon in sediments and temperature over the last 21,000 years. Initially, we hypothesized a positive correlation between carbon accumulation in lakes and modelled paleotemperature. Our homogenized dataset from heterogeneous lakes confirmed this association, even if the highest temperatures throughout our observation period do not correlate with the highest carbon values. We assume that rapid warming events contribute more to high accumulation, while sustained warming leads to carbon outgassing. Considering the current high concentration of carbon in the atmosphere and rising temperatures, ongoing climate change could cause northern lake systems to contribute to a further increase in atmospheric carbon (positive feedback loop). While our findings underscore the reliability of both our standardized data and the LANDO method, expanding our dataset might offer even greater assurance in our conclusions.},
  language  = {en}
}
@phdthesis{Koyan2024,
  author    = {Koyan, Philipp},
  title     = {3D attribute analysis and classification to interpret ground-penetrating radar (GPR) data collected across sedimentary environments: Synthetic studies and field examples},
  doi       = {10.25932/publishup-63948},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-639488},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 115, A51},
  year      = {2024},
  abstract  = {Die Untersuchung des oberfl{\"a}chennahen Untergrundes erfolgt heutzutage bei Frage- stellungen aus den Bereichen des Bauwesens, der Arch{\"a}ologie oder der Geologie und Hydrologie oft mittels zerst{\"o}rungsfreier beziehungsweise zerst{\"o}rungsarmer Methoden der angewandten Geophysik. Ein Bereich, der eine immer zentralere Rolle in Forschung und Ingenieurwesen einnimmt, ist die Untersuchung von sediment{\"a}ren Umgebungen, zum Beispiel zur Charakterisierung oberfl{\"a}chennaher Grundwassersysteme. Ein in diesem Kontext h{\"a}ufig eingesetztes Verfahren ist das des Georadars (oftmals GPR - aus dem Englischen ground-penetrating radar). Dabei werden kurze elektromagnetische Impulse von einer Antenne in den Untergrund ausgesendet, welche dort wiederum an Kontrasten der elektromagnetischen Eigenschaften (wie zum Beispiel an der Grundwasseroberfl{\"a}che) reflektiert, gebrochen oder gestreut werden. Eine Empfangsantenne zeichnet diese Signale in Form derer Amplituden und Laufzeiten auf. Eine Analyse dieser aufgezeichneten Signale erm{\"o}glicht Aussagen {\"u}ber den Untergrund, beispielsweise {\"u}ber die Tiefenlage der Grundwasseroberfl{\"a}che oder die Lagerung und Charakteristika oberfl{\"a}chennaher Sedimentschichten. Dank des hohen Aufl{\"o}sungsverm{\"o}gens der GPR-Methode sowie stetiger technologischer Entwicklungen erfolgt heutzutage die Aufzeichnung von GPR- Daten immer h{\"a}ufiger in 3D. Trotz des hohen zeitlichen und technischen Aufwandes f{\"u}r die Datenakquisition und -bearbeitung werden die resultierenden 3D-Datens{\"a}tze, welche den Untergrund hochaufl{\"o}send abbilden, typischerweise von Hand interpretiert. Dies ist in der Regel ein {\"a}ußerst zeitaufwendiger Analyseschritt. Daher werden oft repr{\"a}sentative 2D-Schnitte aus dem 3D-Datensatz gew{\"a}hlt, in denen markante Reflektionsstrukuren markiert werden. Aus diesen Strukturen werden dann sich {\"a}hnelnde Bereiche im Untergrund als so genannte Radar-Fazies zusammengefasst. Die anhand von 2D-Schnitten erlangten Resultate werden dann als repr{\"a}sentativ f{\"u}r die gesamte untersuchte Fl{\"a}che angesehen. In dieser Form durchgef{\"u}hrte Interpretationen sind folglich oft unvollst{\"a}ndig sowie zudem in hohem Maße von der Expertise der Interpretierenden abh{\"a}ngig und daher in der Regel nicht reproduzierbar. Eine vielversprechende Alternative beziehungsweise Erg{\"a}nzung zur manuellen In- terpretation ist die Verwendung von so genannten GPR-Attributen. Dabei werden nicht die aufgezeichneten Daten selbst, sondern daraus abgeleitete Gr{\"o}ßen, welche die markanten Reflexionsstrukturen in 3D charakterisieren, zur Interpretation herangezogen. In dieser Arbeit wird anhand verschiedener Feld- und Modelldatens{\"a}tze untersucht, welche Attribute sich daf{\"u}r insbesondere eignen. Zudem zeigt diese Arbeit, wie ausgew{\"a}hlte Attribute mittels spezieller Bearbeitungs- und Klassifizierungsmethoden zur Erstellung von 3D-Faziesmodellen genutzt werden k{\"o}nnen. Dank der M{\"o}glichkeit der Erstellung so genannter attributbasierter 3D-GPR-Faziesmodelle k{\"o}nnen zuk{\"u}nftige Interpretationen zu gewissen Teilen automatisiert und somit effizienter durchgef{\"u}hrt werden. Weiterhin beschreiben die so erhaltenen Resultate den untersuchten Untergrund in reproduzierbarer Art und Weise sowie umf{\"a}nglicher als es bisher mittels manueller Interpretationsmethoden typischerweise m{\"o}glich war.},
  language  = {en}
}
@phdthesis{Sharma2024,
  author    = {Sharma, Shubham},
  title     = {Integrated approaches to earthquake forecasting},
  doi       = {10.25932/publishup-63612},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-636125},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 76},
  year      = {2024},
  abstract  = {A comprehensive study on seismic hazard and earthquake triggering is crucial for effective mitigation of earthquake risks. The destructive nature of earthquakes motivates researchers to work on forecasting despite the apparent randomness of the earthquake occurrences. Understanding their underlying mechanisms and patterns is vital, given their potential for widespread devastation and loss of life. This thesis combines methodologies, including Coulomb stress calculations and aftershock analysis, to shed light on earthquake complexities, ultimately enhancing seismic hazard assessment. The Coulomb failure stress (CFS) criterion is widely used to predict the spatial distributions of aftershocks following large earthquakes. However, uncertainties associated with CFS calculations arise from non-unique slip inversions and unknown fault networks, particularly due to the choice of the assumed aftershocks (receiver) mechanisms. Recent studies have proposed alternative stress quantities and deep neural network approaches as superior to CFS with predefined receiver mechanisms. To challenge these propositions, I utilized 289 slip inversions from the SRCMOD database to calculate more realistic CFS values for a layered-half space and variable receiver mechanisms. The analysis also investigates the impact of magnitude cutoff, grid size variation, and aftershock duration on the ranking of stress metrics using receiver operating characteristic (ROC) analysis. Results reveal the performance of stress metrics significantly improves after accounting for receiver variability and for larger aftershocks and shorter time periods, without altering the relative ranking of the different stress metrics. To corroborate Coulomb stress calculations with the findings of earthquake source studies in more detail, I studied the source properties of the 2005 Kashmir earthquake and its aftershocks, aiming to unravel the seismotectonics of the NW Himalayan syntaxis. I simultaneously relocated the mainshock and its largest aftershocks using phase data, followed by a comprehensive analysis of Coulomb stress changes on the aftershock planes. By computing the Coulomb failure stress changes on the aftershock faults, I found that all large aftershocks lie in regions of positive stress change, indicating triggering by either co-seismic or post-seismic slip on the mainshock fault. Finally, I investigated the relationship between mainshock-induced stress changes and associated seismicity parameters, in particular those of the frequency-magnitude (Gutenberg-Richter) distribution and the temporal aftershock decay (Omori-Utsu law). For that purpose, I used my global data set of 127 mainshock-aftershock sequences with the calculated Coulomb Stress (ΔCFS) and the alternative receiver-independent stress metrics in the vicinity of the mainshocks and analyzed the aftershocks properties depend on the stress values. Surprisingly, the results show a clear positive correlation between the Gutenberg-Richter b-value and induced stress, contrary to expectations from laboratory experiments. This observation highlights the significance of structural heterogeneity and strength variations in seismicity patterns. Furthermore, the study demonstrates that aftershock productivity increases nonlinearly with stress, while the Omori-Utsu parameters c and p systematically decrease with increasing stress changes. These partly unexpected findings have significant implications for future estimations of aftershock hazard. The findings in this thesis provides valuable insights into earthquake triggering mechanisms by examining the relationship between stress changes and aftershock occurrence. The results contribute to improved understanding of earthquake behavior and can aid in the development of more accurate probabilistic-seismic hazard forecasts and risk reduction strategies.},
  language  = {en}
}
@phdthesis{Lilienkamp2024,
  author    = {Lilienkamp, Henning},
  title     = {Enhanced computational approaches for data-driven characterization of earthquake ground motion and rapid earthquake impact assessment},
  doi       = {10.25932/publishup-63195},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-631954},
  school      = {Universit{\"a}t Potsdam},
  pages     = {x, 145},
  year      = {2024},
  abstract  = {Rapidly growing seismic and macroseismic databases and simplified access to advanced machine learning methods have in recent years opened up vast opportunities to address challenges in engineering and strong motion seismology from novel, datacentric perspectives. In this thesis, I explore the opportunities of such perspectives for the tasks of ground motion modeling and rapid earthquake impact assessment, tasks with major implications for long-term earthquake disaster mitigation. In my first study, I utilize the rich strong motion database from the Kanto basin, Japan, and apply the U-Net artificial neural network architecture to develop a deep learning based ground motion model. The operational prototype provides statistical estimates of expected ground shaking, given descriptions of a specific earthquake source, wave propagation paths, and geophysical site conditions. The U-Net interprets ground motion data in its spatial context, potentially taking into account, for example, the geological properties in the vicinity of observation sites. Predictions of ground motion intensity are thereby calibrated to individual observation sites and earthquake locations. The second study addresses the explicit incorporation of rupture forward directivity into ground motion modeling. Incorporation of this phenomenon, causing strong, pulse like ground shaking in the vicinity of earthquake sources, is usually associated with an intolerable increase in computational demand during probabilistic seismic hazard analysis (PSHA) calculations. I suggest an approach in which I utilize an artificial neural network to efficiently approximate the average, directivity-related adjustment to ground motion predictions for earthquake ruptures from the 2022 New Zealand National Seismic Hazard Model. The practical implementation in an actual PSHA calculation demonstrates the efficiency and operational readiness of my model. In a follow-up study, I present a proof of concept for an alternative strategy in which I target the generalizing applicability to ruptures other than those from the New Zealand National Seismic Hazard Model. In the third study, I address the usability of pseudo-intensity reports obtained from macroseismic observations by non-expert citizens for rapid impact assessment. I demonstrate that the statistical properties of pseudo-intensity collections describing the intensity of shaking are correlated with the societal impact of earthquakes. In a second step, I develop a probabilistic model that, within minutes of an event, quantifies the probability of an earthquake to cause considerable societal impact. Under certain conditions, such a quick and preliminary method might be useful to support decision makers in their efforts to organize auxiliary measures for earthquake disaster response while results from more elaborate impact assessment frameworks are not yet available. The application of machine learning methods to datasets that only partially reveal characteristics of Big Data, qualify the majority of results obtained in this thesis as explorative insights rather than ready-to-use solutions to real world problems. The practical usefulness of this work will be better assessed in the future by applying the approaches developed to growing and increasingly complex data sets.},
  language  = {en}
}
@phdthesis{JimenezAlvaro2023,
  author    = {Jim{\´e}nez {\´A}lvaro, Eliana},
  title     = {An{\´a}lisis neotect{\´o}nico y lito-tefroestratigr{\´a}fico de los grandes movimientos en masa asociados al fallamiento activo de la cuenca intermontana Quito-Guayllabamba, Ecuador},
  doi       = {10.25932/publishup-62220},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-622209},
  school      = {Universit{\"a}t Potsdam},
  pages     = {195},
  year      = {2023},
  abstract  = {Within the Quito-Guayllabamba intermontane basin of Ecuador, five unusually large colluvial deposits of ancient landslides have been identified and analyzed in this study. The voluminous rotational MM-5 Guayllabamba landslide is the largest one, with a volume of 1183 million m3. The mega debris-avalanches MM-1 Conocoto, MM-3 Oyacoto, and MM-4 San Francisco were originally triggered by an initial rupture that was associated with a rotational landslide, the corresponding deposits have volumes between 399 to 317 million m3. Finally, the deposit with the smallest volume, the MM-2 Bat{\´a}n rotational landslide and debris fall, has a volume of 8,7 million m3. In this thesis, a detailed study of these large mass movements was carried out using neotectonic and litho-tephrostratigraphic methods to understand the geological and geomorphological boundary conditions that might have been relevant for triggering such mass movements. The neotectonic part of the study was based on the qualitative and quantitative geomorphic analysis of these large mass-movement deposits through the structural characterization of anticlines located east of the Quito sub-basin and their collapsed flanks that constitute the break-off areas. This part of the analysis was furthermore supported by the application of different morphometric indices to reveal tectonically forced landscape evolution processes that may have aided mass-movement generation. The litho-tephrostratigraphic part of the study was based on the analysis of petrographic, geochemical, and geochronological characteristics of soil horizons and intercalated volcanic ashes with the aim to constrain the timing of individual mass-movement events and their potential correlation. The results were integrated into chronostratigraphic schemes using break-off surfaces, cross-cutting and superposition relationships of landslide deposits and subsequently deposited strata to understand the mass movements in the tectonic and temporal context of the intermontane basin setting, as well as to identify the triggering mechanisms for each event. The MM-5 Guayllabamba mass movement is the result of the collapse of the southwestern slope of the Mojanda volcano and was triggered by the interaction of geologic and morphologic conditions approximately 0,81 Ma. The first debris-avalanche episode of the MM-3 Oyacoto and MM-4 San Francisco mass movements could be related to both geological and morphological conditions, given the highly fractured rocks and uplift of the Bellavista-Catequilla anticline that was subsequently incised at the foot of the slope by fluvial erosion. This first episode of collapse most likely occurred around 0,8 Ma. The MM-2 Bat{\´a}n mass movement was possibly also facilitated by a combination of geological and morphological conditions, most likely associated with a reduction in the lithostatic stresses affecting the Chiche and Mach{\´a}ngara formations and an increase of shear stresses during lateral fluvial scouring processes at the flanks of the source areas. This points to a linked process between river erosion and uplift processes associated with the evolution of the El Bat{\´a}n-La Bota anticline that could have occurred between 0,5 and 0,25 Ma. The voluminous MM-1 Conocoto debris avalanche, as well as the second debris avalanche episode that generated the MM-3 Oyacoto and MM-4 San Francisco mass movements, were caused by the gravitational collapse of the Mojanda and Cangahua formations that are characterized by the intercalation of volcanic ashes. The failure of the eastern flank of the anticlines probably was associated with increased available humidity related to regional Holocene climatic variations. The results of paleosol chronology combined with regional chronostratigraphic and paleoclimate data suggests that these debris avalanches were triggered between 5 and 4 ka. Active tectonics has shaped the morphological features of the Quito-Guayllabamba intermontane basin. The triggering of mass movements in this environment is associated with failure of Pleistocene lithologies (lake sediments, alluvial and volcanic deposits) subjected to ongoing deformation processes, seismic activity, and superposed episodes of climate variability. The Metropolitan District of Quito is an integral part of this complex environment and the geological, climatic, and topographic conditions that continue to influence the urban geographic space within this intermontane basin. The city of Quito comprises the area with the largest urban consolidation including the sub-basins of Quito and San Antonio, with a population of 2,872 million inhabitants, reflecting the importance of studying the inherent geological and climatic hazards that this region is confronted with.},
  language  = {es}
}
@phdthesis{Antonoglou2024,
  author    = {Antonoglou, Nikolaos},
  title     = {GNSS-based remote sensing: Innovative observation of key hydrological parameters in the Central Andes},
  doi       = {10.25932/publishup-62825},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-628256},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxii, 116},
  year      = {2024},
  abstract  = {The Central Andean region is characterized by diverse climate zones with sharp transitions between them. In this work, the area of interest is the South-Central Andes in northwestern Argentina that borders with Bolivia and Chile. The focus is the observation of soil moisture and water vapour with Global Navigation Satellite System (GNSS) remote-sensing methodologies. Because of the rapid temporal and spatial variations of water vapour and moisture circulations, monitoring this part of the hydrological cycle is crucial for understanding the mechanisms that control the local climate. Moreover, GNSS-based techniques have previously shown high potential and are appropriate for further investigation. This study includes both logistic-organization effort and data analysis. As for the prior, three GNSS ground stations were installed in remote locations in northwestern Argentina to acquire observations, where there was no availability of third-party data. The methodological development for the observation of the climate variables of soil moisture and water vapour is independent and relies on different approaches. The soil-moisture estimation with GNSS reflectometry is an approximation that has demonstrated promising results, but it has yet to be operationally employed. Thus, a more advanced algorithm that exploits more observations from multiple satellite constellations was developed using data from two pilot stations in Germany. Additionally, this algorithm was slightly modified and used in a sea-level measurement campaign. Although the objective of this application is not related to monitoring hydrological parameters, its methodology is based on the same principles and helps to evaluate the core algorithm. On the other hand, water-vapour monitoring with GNSS observations is a well-established technique that is utilized operationally. Hence, the scope of this study is conducting a meteorological analysis by examining the along-the-zenith air-moisture levels and introducing indices related to the azimuthal gradient. The results of the experiments indicate higher-quality soil moisture observations with the new algorithm. Furthermore, the analysis using the stations in northwestern Argentina illustrates the limits of this technology because of varying soil conditions and shows future research directions. The water-vapour analysis points out the strong influence of the topography on atmospheric moisture circulation and rainfall generation. Moreover, the GNSS time series allows for the identification of seasonal signatures, and the azimuthal-gradient indices permit the detection of main circulation pathways.},
  language  = {en}
}
@phdthesis{Manu2023,
  author    = {Manu, Evans},
  title     = {Hydrogeochemical characterization of water resources in the Pra Basin (Ghana) for quality assessment and water management},
  doi       = {10.25932/publishup-62806},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-628062},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVI, 106},
  year      = {2023},
  abstract  = {Watershed management requires an understanding of key hydrochemical processes. The Pra Basin is one of the five major river basins in Ghana with a population of over 4.2 million people. Currently, water resources management faces challenges due to surface water pollution caused by the unregulated release of untreated household and industrial waste into aquatic ecosystems and illegal mining activities. This has increased the need for groundwater as the most reliable water supply. Our understanding of groundwater recharge mechanisms and chemical evolution in the basin has been inadequate, making effective management difficult. Therefore, the main objective of this work is to gain insight into the processes that determine the hydrogeochemical evolution of groundwater quality in the Pra Basin. The combined use of stable isotope, hydrochemistry, and water level data provides the basis for conceptualizing the chemical evolution of groundwater in the Pra Basin. For this purpose, the origin and evaporation rates of water infiltrating into the unsaturated zone were evaluated. In addition, Chloride Mass Balance (CMB) and Water Table Fluctuations (WTF) were considered to quantify groundwater recharge for the basin. Indices such as water quality index (WQI), sodium adsorption ratio (SAR), Wilcox diagram, and salinity (USSL) were used in this study to determine the quality of the resource for use as drinking water and for irrigation purposes. Due to the heterogeneity of the hydrochemical data, the statistical techniques of hierarchical cluster and factor analysis were applied to subdivide the data according to their spatial correlation. A conceptual hydrogeochemical model was developed and subsequently validated by applying combinatorial inverse and reaction pathway-based geochemical models to determine plausible mineral assemblages that control the chemical composition of the groundwater. The interactions between water and rock determine the groundwater quality in the Pra Basin. The results underline that the groundwater is of good quality and can be used for drinking water and irrigation purposes. It was demonstrated that there is a large groundwater potential to meet the entire Pra Basin's current and future water demands. The main recharge area was identified as the northern zone, while the southern zone is the discharge area. The predominant influence of weathering of silicate minerals plays a key role in the chemical evolution of the groundwater. The work presented here provides fundamental insights into the hydrochemistry of the Pra Basin and provides data important to water managers for informed decision-making in planning and allocating water resources for various purposes. A novel inverse modelling approach was used in this study to identify different mineral compositions that determine the chemical evolution of groundwater in the Pra Basin. This modelling technique has the potential to simulate the composition of groundwater at the basin scale with large hydrochemical heterogeneity, using average water composition to represent established spatial groupings of water chemistry.},
  language  = {en}
}
@phdthesis{Mueller2024,
  author    = {M{\"u}ller, Daniel},
  title     = {Identification and monitoring of structures, controls, and evolution dynamics of hydrothermal systems and associated alteration through high-resolution remote sensing and in situ analysis},
  doi       = {10.25932/publishup-62668},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-626683},
  school      = {Universit{\"a}t Potsdam},
  pages     = {205},
  year      = {2024},
  abstract  = {Volcanic hydrothermal systems are an integral part of most volcanoes and typically involve a heat source, adequate fluid supply, and fracture or pore systems through which the fluids can circulate within the volcanic edifice. Associated with this are subtle but powerful processes that can significantly influence the evolution of volcanic activity or the stability of the near-surface volcanic system through mechanical weakening, permeability reduction, and sealing of the affected volcanic rock. These processes are well constrained for rock samples by laboratory analyses but are still difficult to extrapolate and evaluate at the scale of an entire volcano. Advances in unmanned aircraft systems (UAS), sensor technology, and photogrammetric processing routines now allow us to image volcanic surfaces at the centimeter scale and thus study volcanic hydrothermal systems in great detail. This thesis aims to explore the potential of UAS approaches for studying the structures, processes, and dynamics of volcanic hydrothermal systems but also to develop methodological approaches to uncover secondary information hidden in the data, capable of indicating spatiotemporal dynamics or potentially critical developments associated with hydrothermal alteration. To accomplish this, the thesis describes the investigation of two near-surface volcanic hydrothermal systems, the El Tatio geyser field in Chile and the fumarole field of La Fossa di Vulcano (Italy), both of which are among the best-studied sites of their kind. Through image analysis, statistical, and spatial analyses we have been able to provide the most detailed structural images of both study sites to date, with new insights into the driving forces of such systems but also revealing new potential controls, which are summarized in conceptual site-specific models. Furthermore, the thesis explores methodological remote sensing approaches to detect, classify and constrain hydrothermal alteration and surface degassing from UAS-derived data, evaluated them by mineralogical and chemical ground-truthing, and compares the alteration pattern with the present-day degassing activity. A significant contribution of the often neglected diffuse degassing activity to the total amount of degassing is revealed and constrains secondary processes and dynamics associated with hydrothermal alteration that lead to potentially critical developments like surface sealing. The results and methods used provide new approaches for alteration research, for the monitoring of degassing and alteration effects, and for thermal monitoring of fumarole fields, with the potential to be incorporated into volcano monitoring routines.},
  language  = {en}
}