@phdthesis{Zaehle2005,
  author    = {Zaehle, S{\"o}nke},
  title     = {Process-based simulation of the terrestrial biosphere : an evaluation of present-day and future terrestrial carbon balance estimates and their uncertainty},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5263},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {At present, carbon sequestration in terrestrial ecosystems slows the growth rate of atmospheric CO2 concentrations, and thereby reduces the impact of anthropogenic fossil fuel emissions on the climate system. Changes in climate and land use affect terrestrial biosphere structure and functioning at present, and will likely impact on the terrestrial carbon balance during the coming decades - potentially providing a positive feedback to the climate system due to soil carbon releases under a warmer climate. Quantifying changes, and the associated uncertainties, in regional terrestrial carbon budgets resulting from these effects is relevant for the scientific understanding of the Earth system and for long-term climate mitigation strategies. A model describing the relevant processes that govern the terrestrial carbon cycle is a necessary tool to project regional carbon budgets into the future. This study (1) provides an extensive evaluation of the parameter-based uncertainty in model results of a leading terrestrial biosphere model, the Lund-Potsdam-Jena Dynamic Global Vegetation Model (LPJ-DGVM), against a range of observations and under climate change, thereby complementing existing studies on other aspects of model uncertainty; (2) evaluates different hypotheses to explain the age-related decline in forest growth, both from theoretical and experimental evidence, and introduces the most promising hypothesis into the model; (3) demonstrates how forest statistics can be successfully integrated with process-based modelling to provide long-term constraints on regional-scale forest carbon budget estimates for a European forest case-study; and (4) elucidates the combined effects of land-use and climate changes on the present-day and future terrestrial carbon balance over Europe for four illustrative scenarios - implemented by four general circulation models - using a comprehensive description of different land-use types within the framework of LPJ-DGVM. This study presents a way to assess and reduce uncertainty in process-based terrestrial carbon estimates on a regional scale. The results of this study demonstrate that simulated present-day land-atmosphere carbon fluxes are relatively well constrained, despite considerable uncertainty in modelled net primary production. Process-based terrestrial modelling and forest statistics are successfully combined to improve model-based estimates of vegetation carbon stocks and their change over time. Application of the advanced model for 77 European provinces shows that model-based estimates of biomass development with stand age compare favourably with forest inventory-based estimates for different tree species. Driven by historic changes in climate, atmospheric CO2 concentration, forest area and wood demand between 1948 and 2000, the model predicts European-scale, present-day age structure of forests, ratio of biomass removals to increment, and vegetation carbon sequestration rates that are consistent with inventory-based estimates. Alternative scenarios of climate and land-use change in the 21<sup>st century suggest carbon sequestration in the European terrestrial biosphere during the coming decades will likely be on magnitudes relevant to climate mitigation strategies. However, the uptake rates are small in comparison to the European emissions from fossil fuel combustion, and will likely decline towards the end of the century. Uncertainty in climate change projections is a key driver for uncertainty in simulated land-atmosphere carbon fluxes and needs to be accounted for in mitigation studies of the terrestrial biosphere.},
  subject      = {Terrestrische {\"O}kologie},
  language  = {en}
}
@phdthesis{Wriedt2004,
  author    = {Wriedt, Gunter},
  title     = {Modelling of nitrogen transport and turnover during soil and groundwater passage in a small lowland catchment of Northern Germany},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001307},
  school      = {Universit{\"a}t Potsdam},
  year      = {2004},
  abstract  = {Stoffumsatzreaktionen und hydraulische Prozesse im Boden und Grundwasser k{\"o}nnen in Tieflandeinzugsgebieten zu einer Nitratretention f{\"u}hren. Die Untersuchung dieser Prozesse in Raum und Zeit kann mit Hilfe geeigneter Modelle erfolgen. Ziele dieser Arbeit sind: i) die Entwicklung eines geeigneten Modellansatzes durch Kombination von Teilmodellen zur Simulation des N-Transportes im Boden und Grundwasser von Tieflandeinzugsgebieten und ii) die Untersuchung von Wechselwirkungen zwischen Gebietseigenschaften und N-Transport unter besonderer Ber{\"u}cksichtigung der potentiellen N-Zufuhr in die Oberfl{\"a}chengew{\"a}sser. Der Modellansatz basiert auf der Kombination verschiedener Teilmodelle: das Bodenwasser- und -stickstoffmodell mRISK-N, das Grundwassermodell MODFLOW und das Stofftransportmodell RT3D. Zur Untersuchung der Wechselwirkungen mit den Gebietseigenschaften muss die Verteilung und Verf{\"u}gbarkeit von Reaktionspartnern ber{\"u}cksichtigt werden. Dazu wurde ein Reaktionsmodul entwickelt, welches chemische Prozesse im Grundwasser simuliert. Hierzu geh{\"o}ren die Mineralisation organischer Substanz durch Sauerstoff, Nitrat und Sulfat sowie die Pyritoxidation durch Sauerstoff und Nitrat. Der Modellansatz wurde in verschiedenen Einzelstudien angewandt, wobei jeweils bestimmte Teilmodelle im Vordergrund stehen. Alle Modellstudien basieren auf Daten aus dem Schaugrabeneinzugsgebiet (ca. 25 km\&\#178;), in der N{\"a}he von Osterburg(Altmark) im Norden Sachsen-Anhalts. Die folgenden Einzelstudien wurden durchgef{\"u}hrt: i) Evaluation des Bodenmodells anhand von Lysimeterdaten, ii) Modellierung eines Tracerexperimentes im Feldmaßstab als eine erste Anwendung des Reaktionsmoduls, iii) Untersuchung hydraulisch-chemischer Wechselwirkungen an einem 2D-Grundwassertransekt, iv) Fl{\"a}chenverteilte Modellierung von Grundwasserneubildung und Bodenstickstoffaustrag im Untersuchungsgebiet als Eingangsdaten f{\"u}r nachfolgende Grundwassersimulationen, und v) Untersuchung der Ausbreitung von Nitrat im Grundwasser und des Durchbruchs in die Oberfl{\"a}chengew{\"a}sser im Untersuchungsgebiet auf Basis einer 3D-Modellierung von Grundwasserstr{\"o}mung und reaktivem Stofftransport. Die Modellstudien zeigen, dass der Modellansatz geeignet ist, die Wechselwirkungen zwischen Stofftransport und \&ndash;umsatz und den hydraulisch-chemischen Gebietseigenschaften zu modellieren. Die Ausbreitung von Nitrat im Sediment wird wesentlich von der Verf{\"u}gbarkeit reaktiver Substanzen sowie der Verweilzeit im Grundwasserleiter bestimmt. Bei der Simulation des Untersuchungsgebietes wurde erst nach 70 Jahren eine der gegebenen Eintragssitutation entsprechende Nitratkonzentration im Grundwasserzustrom zum Grabensystem erreicht (konservativer Transport). Die Ber{\"u}cksichtigung von reaktivem Stofftransport f{\"u}hrt zu einer deutlichen Reduktion der Nitratkonzentrationen. Die Modellergebnisse zeigen, dass der Grundwasserzustrom die beobachtete Nitratbelastung im Grabensystem nicht erkl{\"a}ren kann, da der Großteil des Nitrates durch Denitrifikation verloren geht. Andere Quellen, wie direkte Eintr{\"a}ge oder Dr{\"a}nagenzufl{\"u}sse m{\"u}ssen ebenfalls in Betracht gezogen werden. Die Prognosef{\"a}higkeit des Modells f{\"u}r das Untersuchungsgebiet wird durch die Datenunsicherheiten und die Sch{\"a}tzung der Modellparameter eingeschr{\"a}nkt. Dennoch ist der Modellansatz eine wertvolle Hilfe bei der Identifizierung von belastungsrelevanten Teilfl{\"a}chen (Stoffquellen und -senken) sowie bei der Modellierung der Auswirkungen von Managementmaßnahmen oder Landnutzungsver{\"a}nderungen auf Grundlage von Szenario-Simulationen. Der Modellansatz unterst{\"u}tzt auch die Interpretation von Beobachtungsdaten, da so die lokalen Informationen in einen r{\"a}umlichen und zeitlichen Zusammenhang gestellt werden k{\"o}nnen.},
  language  = {en}
}
@phdthesis{Stoltnow2023,
  author    = {Stoltnow, Malte},
  title     = {Magmatic-hydrothermal processes along the porphyry to epithermal transition},
  doi       = {10.25932/publishup-61140},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-611402},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxviii, 132},
  year      = {2023},
  abstract  = {Magmatic-hydrothermal systems form a variety of ore deposits at different proximities to upper-crustal hydrous magma chambers, ranging from greisenization in the roof zone of the intrusion, porphyry mineralization at intermediate depths to epithermal vein deposits near the surface. The physical transport processes and chemical precipitation mechanisms vary between deposit types and are often still debated. The majority of magmatic-hydrothermal ore deposits are located along the Pacific Ring of Fire, whose eastern part is characterized by the Mesozoic to Cenozoic orogenic belts of the western North and South Americas, namely the American Cordillera. Major magmatic-hydrothermal ore deposits along the American Cordillera include (i) porphyry Cu(-Mo-Au) deposits (along the western cordilleras of Mexico, the western U.S., Canada, Chile, Peru, and Argentina); (ii) Climax- (and sub-) type Mo deposits (Colorado Mineral Belt and northern New Mexico); and (iii) porphyry and IS-type epithermal Sn(-W-Ag) deposits of the Central Andean Tin Belt (Bolivia, Peru and northern Argentina). The individual studies presented in this thesis primarily focus on the formation of different styles of mineralization located at different proximities to the intrusion in magmatic-hydrothermal systems along the American Cordillera. This includes (i) two individual geochemical studies on the Sweet Home Mine in the Colorado Mineral Belt (potential endmember of peripheral Climax-type mineralization); (ii) one numerical modeling study setup in a generic porphyry Cu-environment; and (iii) a numerical modeling study on the Central Andean Tin Belt-type Pirquitas Mine in NW Argentina. Microthermometric data of fluid inclusions trapped in greisen quartz and fluorite from the Sweet Home Mine (Detroit City Portal) suggest that the early-stage mineralization precipitated from low- to medium-salinity (1.5-11.5 wt.\% equiv. NaCl), CO2-bearing fluids at temperatures between 360 and 415°C and at depths of at least 3.5 km. Stable isotope and noble gas isotope data indicate that greisen formation and base metal mineralization at the Sweet Home Mine was related to fluids of different origins. Early magmatic fluids were the principal source for mantle-derived volatiles (CO2, H2S/SO2, noble gases), which subsequently mixed with significant amounts of heated meteoric water. Mixing of magmatic fluids with meteoric water is constrained by δ2Hw-δ18Ow relationships of fluid inclusions. The deep hydrothermal mineralization at the Sweet Home Mine shows features similar to deep hydrothermal vein mineralization at Climax-type Mo deposits or on their periphery. This suggests that fluid migration and the deposition of ore and gangue minerals in the Sweet Home Mine was triggered by a deep-seated magmatic intrusion. The second study on the Sweet Home Mine presents Re-Os molybdenite ages of 65.86±0.30 Ma from a Mo-mineralized major normal fault, namely the Contact Structure, and multimineral Rb-Sr isochron ages of 26.26±0.38 Ma and 25.3±3.0 Ma from gangue minerals in greisen assemblages. The age data imply that mineralization at the Sweet Home Mine formed in two separate events: Late Cretaceous (Laramide-related) and Oligocene (Rio Grande Rift-related). Thus, the age of Mo mineralization at the Sweet Home Mine clearly predates that of the Oligocene Climax-type deposits elsewhere in the Colorado Mineral Belt. The Re-Os and Rb-Sr ages also constrain the age of the latest deformation along the Contact Structure to between 62.77±0.50 Ma and 26.26±0.38 Ma, which was employed and/or crosscut by Late Cretaceous and Oligocene fluids. Along the Contact Structure Late Cretaceous molybdenite is spatially associated with Oligocene minerals in the same vein system, a feature that precludes molybdenite recrystallization or reprecipitation by Oligocene ore fluids. Ore precipitation in porphyry copper systems is generally characterized by metal zoning (Cu-Mo to Zn-Pb-Ag), which is suggested to be variably related to solubility decreases during fluid cooling, fluid-rock interactions, partitioning during fluid phase separation and mixing with external fluids. The numerical modeling study setup in a generic porphyry Cu-environment presents new advances of a numerical process model by considering published constraints on the temperature- and salinity-dependent solubility of Cu, Pb and Zn in the ore fluid. This study investigates the roles of vapor-brine separation, halite saturation, initial metal contents, fluid mixing, and remobilization as first-order controls of the physical hydrology on ore formation. The results show that the magmatic vapor and brine phases ascend with different residence times but as miscible fluid mixtures, with salinity increases generating metal-undersaturated bulk fluids. The release rates of magmatic fluids affect the location of the thermohaline fronts, leading to contrasting mechanisms for ore precipitation: higher rates result in halite saturation without significant metal zoning, lower rates produce zoned ore shells due to mixing with meteoric water. Varying metal contents can affect the order of the final metal precipitation sequence. Redissolution of precipitated metals results in zoned ore shell patterns in more peripheral locations and also decouples halite saturation from ore precipitation. The epithermal Pirquitas Sn-Ag-Pb-Zn mine in NW Argentina is hosted in a domain of metamorphosed sediments without geological evidence for volcanic activity within a distance of about 10 km from the deposit. However, recent geochemical studies of ore-stage fluid inclusions indicate a significant contribution of magmatic volatiles. This study tested different formation models by applying an existing numerical process model for porphyry-epithermal systems with a magmatic intrusion located either at a distance of about 10 km underneath the nearest active volcano or hidden underneath the deposit. The results show that the migration of the ore fluid over a 10-km distance results in metal precipitation by cooling before the deposit site is reached. In contrast, simulations with a hidden magmatic intrusion beneath the Pirquitas deposit are in line with field observations, which include mineralized hydrothermal breccias in the deposit area.},
  language  = {en}
}
@phdthesis{Senftleben2020,
  author    = {Senftleben, Robin},
  title     = {Earth's magnetic field over the last 1000 years},
  doi       = {10.25932/publishup-47315},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473150},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xii, 104},
  year      = {2020},
  abstract  = {To investigate the reliability and stability of spherical harmonic models based on archeo/-paleomagnetic data, 2000 Geomagnetic models were calculated. All models are based on the same data set but with randomized uncertainties. Comparison of these models to the geomagnetic field model gufm1 showed that large scale magnetic field structures up to spherical harmonic degree 4 are stable throughout all models. Through a ranking of all models by comparing the dipole coefficients to gufm1 more realistic uncertainty estimates were derived than the authors of the data provide. The derived uncertainty estimates were used in further modelling, which combines archeo/-paleomagnetic and historical data. The huge difference in data count, accuracy and coverage of these two very different data sources made it necessary to introduce a time dependent spatial damping, which was constructed to constrain the spatial complexity of the model. Finally 501 models were calculated by considering that each data point is a Gaussian random variable, whose mean is the original value and whose standard deviation is its uncertainty. The final model arhimag1k is calculated by taking the mean of the 501 sets of Gauss coefficients. arhimag1k fits different dependent and independent data sets well. It shows an early reverse flux patch at the core-mantle boundary between 1000 AD and 1200 AD at the location of the South Atlantic Anomaly today. Another interesting feature is a high latitude flux patch over Greenland between 1200 and 1400 AD. The dipole moment shows a constant behaviour between 1600 and 1840 AD. In the second part of the thesis 4 new paleointensities from 4 different flows of the island Fogo, which is part of Cape Verde, are presented. The data is fitted well by arhimag1k with the exception of the value at 1663 of 28.3 microtesla, which is approximately 10 microtesla lower than the model suggest.},
  language  = {en}
}
@phdthesis{Schuette2011,
  author    = {Sch{\"u}tte, Moritz},
  title     = {Evolutionary fingerprints in genome-scale networks},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57483},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Mathematical modeling of biological phenomena has experienced increasing interest since new high-throughput technologies give access to growing amounts of molecular data. These modeling approaches are especially able to test hypotheses which are not yet experimentally accessible or guide an experimental setup. One particular attempt investigates the evolutionary dynamics responsible for today's composition of organisms. Computer simulations either propose an evolutionary mechanism and thus reproduce a recent finding or rebuild an evolutionary process in order to learn about its mechanism. The quest for evolutionary fingerprints in metabolic and gene-coexpression networks is the central topic of this cumulative thesis based on four published articles. An understanding of the actual origin of life will probably remain an insoluble problem. However, one can argue that after a first simple metabolism has evolved, the further evolution of metabolism occurred in parallel with the evolution of the sequences of the catalyzing enzymes. Indications of such a coevolution can be found when correlating the change in sequence between two enzymes with their distance on the metabolic network which is obtained from the KEGG database. We observe that there exists a small but significant correlation primarily on nearest neighbors. This indicates that enzymes catalyzing subsequent reactions tend to be descended from the same precursor. Since this correlation is relatively small one can at least assume that, if new enzymes are no "genetic children" of the previous enzymes, they certainly be descended from any of the already existing ones. Following this hypothesis, we introduce a model of enzyme-pathway coevolution. By iteratively adding enzymes, this model explores the metabolic network in a manner similar to diffusion. With implementation of an Gillespie-like algorithm we are able to introduce a tunable parameter that controls the weight of sequence similarity when choosing a new enzyme. Furthermore, this method also defines a time difference between successive evolutionary innovations in terms of a new enzyme. Overall, these simulations generate putative time-courses of the evolutionary walk on the metabolic network. By a time-series analysis, we find that the acquisition of new enzymes appears in bursts which are pronounced when the influence of the sequence similarity is higher. This behavior strongly resembles punctuated equilibrium which denotes the observation that new species tend to appear in bursts as well rather than in a gradual manner. Thus, our model helps to establish a better understanding of punctuated equilibrium giving a potential description at molecular level. From the time-courses we also extract a tentative order of new enzymes, metabolites, and even organisms. The consistence of this order with previous findings provides evidence for the validity of our approach. While the sequence of a gene is actually subject to mutations, its expression profile might also indirectly change through the evolutionary events in the cellular interplay. Gene coexpression data is simply accessible by microarray experiments and commonly illustrated using coexpression networks where genes are nodes and get linked once they show a significant coexpression. Since the large number of genes makes an illustration of the entire coexpression network difficult, clustering helps to show the network on a metalevel. Various clustering techniques already exist. However, we introduce a novel one which maintains control of the cluster sizes and thus assures proper visual inspection. An application of the method on Arabidopsis thaliana reveals that genes causing a severe phenotype often show a functional uniqueness in their network vicinity. This leads to 20 genes of so far unknown phenotype which are however suggested to be essential for plant growth. Of these, six indeed provoke such a severe phenotype, shown by mutant analysis. By an inspection of the degree distribution of the A.thaliana coexpression network, we identified two characteristics. The distribution deviates from the frequently observed power-law by a sharp truncation which follows after an over-representation of highly connected nodes. For a better understanding, we developed an evolutionary model which mimics the growth of a coexpression network by gene duplication which underlies a strong selection criterion, and slight mutational changes in the expression profile. Despite the simplicity of our assumption, we can reproduce the observed properties in A.thaliana as well as in E.coli and S.cerevisiae. The over-representation of high-degree nodes could be identified with mutually well connected genes of similar functional families: zinc fingers (PF00096), flagella, and ribosomes respectively. In conclusion, these four manuscripts demonstrate the usefulness of mathematical models and statistical tools as a source of new biological insight. While the clustering approach of gene coexpression data leads to the phenotypic characterization of so far unknown genes and thus supports genome annotation, our model approaches offer explanations for observed properties of the coexpression network and furthermore substantiate punctuated equilibrium as an evolutionary process by a deeper understanding of an underlying molecular mechanism.},
  language  = {en}
}
@phdthesis{Schroeder2015,
  author    = {Schr{\"o}der, Sarah},
  title     = {Modelling surface evolution coupled with tectonics},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90385},
  school      = {Universit{\"a}t Potsdam},
  pages     = {viii, 129},
  year      = {2015},
  abstract  = {This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west.},
  language  = {en}
}
@phdthesis{Rossmanith2005,
  author    = {Rossmanith, Eva},
  title     = {Breeding biology, mating system and population dynamics of the Lesser Spotted Woodepcker (Picoides minor) : combining empirical and model investigations},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5328},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {The protection of species is one major focus in conservation biology. The basis for any management concept is the knowledge of the species autecology. In my thesis, I studied the life-history traits and population dynamics of the endangered Lesser Spotted Woodpecker (Picoides minor) in Central Europe. Here, I combine a range of approaches, from empirical investigations of a Lesser Spotted Woodpecker population in the Taunus low mountain range in Germany, the analysis of empirical data and the development of an individual-based stochastic model simulating the population dynamics. In the field studies I collected basic demographic data of reproductive success and mortality. Moreover, breeding biology and behaviour were investigated in detail. My results showed a significant decrease of the reproductive success with later timing of breeding, caused by deterioration in food supply. Moreover, mate fidelity was of benefit, since pairs composed of individuals that bred together the previous year started earlier with egg laying and obtained a higher reproductive success. Both sexes were involved in parental care, but the care was only shared equally during incubation and the early nestling stage. In the late nestling stage, parental care strategies differed between sexes: Females considerably decreased feeding rate with number of nestlings and even completely deserted small broods. Males fed their nestlings irrespective of brood size and compensated for the females absence. The organisation of parental care in the Lesser Spotted Woodpecker is discussed to provide the possibility for females to mate with two males with separate nests and indeed, polyandry was confirmed. To investigate the influence of the observed flexibility in the social mating system on the population persistence, a stochastic individual-based model simulating the population dynamics of the Lesser Spotted Woodpecker was developed, based on empirical results. However, pre-breeding survival rates could not be obtained empirically and I present in this thesis a pattern-oriented modelling approach to estimate pre-breeding survival rates by comparing simulation results with empirical pattern of population structure and reproductive success on population level. Here, I estimated the pre-breeding survival for two Lesser Spotted Woodpecker populations on different latitudes to test the reliability of the results. Finally, I used the same simulation model to investigate the effect of flexibility in the mating system on the persistence of the population. With increasing rate of polyandry in the population, the persistence increased and even low rates of polyandry had a strong influence. Even when presuming only a low polyandry rate and costs of polyandry in terms of higher mortality and lower reproductive success for the secondary male, the positive effect of polyandry on the persistence of the population was still strong. This thesis greatly helped to increase the knowledge of the autecology of an endangered woodpecker species. Beyond the relevance for the species, I could demonstrate here that in general flexibility in mating systems are buffer mechanisms and reduce the impact of environmental and demographic noise.},
  subject      = {Modellierung},
  language  = {en}
}
@phdthesis{RodriguezPiceda2022,
  author    = {Rodriguez Piceda, Constanza},
  title     = {Thermomechanical state of the southern Central Andes},
  doi       = {10.25932/publishup-54927},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549275},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xx, 228},
  year      = {2022},
  abstract  = {The Andes are a ~7000 km long N-S trending mountain range developed along the South American western continental margin. Driven by the subduction of the oceanic Nazca plate beneath the continental South American plate, the formation of the northern and central parts of the orogen is a type case for a non-collisional orogeny. In the southern Central Andes (SCA, 29°S-39°S), the oceanic plate changes the subduction angle between 33°S and 35°S from almost horizontal (< 5° dip) in the north to a steeper angle (~30° dip) in the south. This sector of the Andes also displays remarkable along- and across- strike variations of the tectonic deformation patterns. These include a systematic decrease of topographic elevation, of crustal shortening and foreland and orogenic width, as well as an alternation of the foreland deformation style between thick-skinned and thin-skinned recorded along- and across the strike of the subduction zone. Moreover, the SCA are a very seismically active region. The continental plate is characterized by a relatively shallow seismicity (< 30 km depth) which is mainly focussed at the transition from the orogen to the lowland areas of the foreland and the forearc; in contrast, deeper seismicity occurs below the interiors of the northern foreland. Additionally, frequent seismicity is also recorded in the shallow parts of the oceanic plate and in a sector of the flat slab segment between 31°S and 33°S. The observed spatial heterogeneity in tectonic and seismic deformation in the SCA has been attributed to multiple causes, including variations in sediment thickness, the presence of inherited structures and changes in the subduction angle of the oceanic slab. However, there is no study that inquired the relationship between the long-term rheological configuration of the SCA and the spatial deformation patterns. Moreover, the effects of the density and thickness configuration of the continental plate and of variations in the slab dip angle in the rheological state of the lithosphere have been not thoroughly investigated yet. Since rheology depends on composition, pressure and temperature, a detailed characterization of the compositional, structural and thermal fields of the lithosphere is needed. Therefore, by using multiple geophysical approaches and data sources, I constructed the following 3D models of the SCA lithosphere: (i) a seismically-constrained structural and density model that was tested against the gravity field; (ii) a thermal model integrating the conversion of mantle shear-wave velocities to temperature with steady-state conductive calculations in the uppermost lithosphere (< 50 km depth), validated by temperature and heat-flow measurements; and (iii) a rheological model of the long-term lithospheric strength using as input the previously-generated models. The results of this dissertation indicate that the present-day thermal and rheological fields of the SCA are controlled by different mechanisms at different depths. At shallow depths (< 50 km), the thermomechanical field is modulated by the heterogeneous composition of the continental lithosphere. The overprint of the oceanic slab is detectable where the oceanic plate is shallow (< 85 km depth) and the radiogenic crust is thin, resulting in overall lower temperatures and higher strength compared to regions where the slab is steep and the radiogenic crust is thick. At depths > 50 km, largest temperatures variations occur where the descending slab is detected, which implies that the deep thermal field is mainly affected by the slab dip geometry. The outcomes of this thesis suggests that long-term thermomechanical state of the lithosphere influences the spatial distribution of seismic deformation. Most of the seismicity within the continental plate occurs above the modelled transition from brittle to ductile conditions. Additionally, there is a spatial correlation between the location of these events and the transition from the mechanically strong domains of the forearc and foreland to the weak domain of the orogen. In contrast, seismicity within the oceanic plate is also detected where long-term ductile conditions are expected. I therefore analysed the possible influence of additional mechanisms triggering these earthquakes, including the compaction of sediments in the subduction interface and dehydration reactions in the slab. To that aim, I carried out a qualitative analysis of the state of hydration in the mantle using the ratio between compressional- and shear-wave velocity (vp/vs ratio) from a previous seismic tomography. The results from this analysis indicate that the majority of the seismicity spatially correlates with hydrated areas of the slab and overlying continental mantle, with the exception of the cluster within the flat slab segment. In this region, earthquakes are likely triggered by flexural processes where the slab changes from a flat to a steep subduction angle. First-order variations in the observed tectonic patterns also seem to be influenced by the thermomechanical configuration of the lithosphere. The mechanically strong domains of the forearc and foreland, due to their resistance to deformation, display smaller amounts of shortening than the relatively weak orogenic domain. In addition, the structural and thermomechanical characteristics modelled in this dissertation confirm previous analyses from geodynamic models pointing to the control of the observed heterogeneities in the orogen and foreland deformation style. These characteristics include the lithospheric and crustal thickness, the presence of weak sediments and the variations in gravitational potential energy. Specific conditions occur in the cold and strong northern foreland, which is characterized by active seismicity and thick-skinned structures, although the modelled crustal strength exceeds the typical values of externally-applied tectonic stresses. The additional mechanisms that could explain the strain localization in a region that should resist deformation are: (i) increased tectonic forces coming from the steepening of the slab and (ii) enhanced weakening along inherited structures from pre-Andean deformation events. Finally, the thermomechanical conditions of this sector of the foreland could be a key factor influencing the preservation of the flat subduction angle at these latitudes of the SCA.},
  language  = {en}
}
@phdthesis{Reusser2011,
  author    = {Reusser, Dominik Edwin},
  title     = {Combining smart model diagnostics and effective data collection for snow catchments},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52574},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80\% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment.},
  language  = {en}
}
@phdthesis{Raatz2019,
  author    = {Raatz, Michael},
  title     = {Strategies within predator-prey interactions - from individuals to ecosystems},
  doi       = {10.25932/publishup-42658},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426587},
  school      = {Universit{\"a}t Potsdam},
  pages     = {175},
  year      = {2019},
  abstract  = {Predator-prey interactions provide central links in food webs. These interaction are directly or indirectly impacted by a number of factors. These factors range from physiological characteristics of individual organisms, over specifics of their interaction to impacts of the environment. They may generate the potential for the application of different strategies by predators and prey. Within this thesis, I modelled predator-prey interactions and investigated a broad range of different factors driving the application of certain strategies, that affect the individuals or their populations. In doing so, I focused on phytoplankton-zooplankton systems as established model systems of predator-prey interactions. At the level of predator physiology I proposed, and partly confirmed, adaptations to fluctuating availability of co-limiting nutrients as beneficial strategies. These may allow to store ingested nutrients or to regulate the effort put into nutrient assimilation. We found that these two strategies are beneficial at different fluctuation frequencies of the nutrients, but may positively interact at intermediate frequencies. The corresponding experiments supported our model results. We found that the temporal structure of nutrient fluctuations indeed has strong effects on the juvenile somatic growth rate of {\itshape Daphnia}. Predator colimitation by energy and essential biochemical nutrients gave rise to another physiological strategy. High-quality prey species may render themselves indispensable in a scenario of predator-mediated coexistence by being the only source of essential biochemical nutrients, such as cholesterol. Thereby, the high-quality prey may even compensate for a lacking defense and ensure its persistence in competition with other more defended prey species. We found a similar effect in a model where algae and bacteria compete for nutrients. Now, being the only source of a compound that is required by the competitor (bacteria) prevented the competitive exclusion of the algae. In this case, the essential compounds were the organic carbon provided by the algae. Here again, being indispensable served as a prey strategy that ensured its coexistence. The latter scenario also gave rise to the application of the two metabolic strategies of autotrophy and heterotrophy by algae and bacteria, respectively. We found that their coexistence allowed the recycling of resources in a microbial loop that would otherwise be lost. Instead, these resources were made available to higher trophic levels, increasing the trophic transfer efficiency in food webs. The predation process comprises the next higher level of factors shaping the predator-prey interaction, besides these factors that originated from the functioning or composition of individuals. Here, I focused on defensive mechanisms and investigated multiple scenarios of static or adaptive combinations of prey defense and predator offense. I confirmed and extended earlier reports on the coexistence-promoting effects of partially lower palatability of the prey community. When bacteria and algae are coexisting, a higher palatability of bacteria may increase the average predator biomass, with the side effect of making the population dynamics more regular. This may facilitate experimental investigations and interpretations. If defense and offense are adaptive, this allows organisms to maximize their growth rate. Besides this fitness-enhancing effect, I found that co-adaptation may provide the predator-prey system with the flexibility to buffer external perturbations. On top of these rather internal factors, environmental drivers also affect predator-prey interactions. I showed that environmental nutrient fluctuations may create a spatio-temporal resource heterogeneity that selects for different predator strategies. I hypothesized that this might favour either storage or acclimation specialists, depending on the frequency of the environmental fluctuations. We found that many of these factors promote the coexistence of different strategies and may therefore support and sustain biodiversity. Thus, they might be relevant for the maintenance of crucial ecosystem functions that also affect us humans. Besides this, the richness of factors that impact predator-prey interactions might explain why so many species, especially in the planktonic regime, are able to coexist.},
  language  = {en}
}