@article{TangSmaczniakTepperetal.2022,
  author    = {Tang, Jo Sing Julia and Smaczniak, Aline Debrassi and Tepper, Lucas and Rosencrantz, Sophia and Aleksanyan, Mina and D{\"a}hne, Lars and Rosencrantz, Ruben R.},
  title     = {Glycopolymer based LbL multilayer thin films with embedded liposomes},
  series = {Macromolecular bioscience},
  volume    = {22},
  journal   = {Macromolecular bioscience},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1616-5187},
  doi       = {10.1002/mabi.202100461},
  pages     = {9},
  year      = {2022},
  abstract  = {Layer-by-layer (LbL) self-assembly emerged as an efficient technique for fabricating coating systems for, e.g., drug delivery systems with great versatility and control. In this work, protecting group free and aqueous-based syntheses of bioinspired glycopolymer electrolytes aredescribed. Thin films of the glycopolymers are fabricated by LbL self-assembly and function as scaffolds for liposomes, which potentially can encapsulate active substances. The adsorbed mass, pH stability, and integrity of glycopolymer coatings as well as the embedded liposomes are investigated via whispering gallery mode (WGM) technology and quartz crystal microbalance with dissipation (QCM-D) monitoring , which enable label-free characterization. Glycopolymer thin films, with and without liposomes, are stable in the physiological pH range. QCM-D measurements verify the integrity of lipid vesicles. Thus, the fabrication of glycopolymer-based surface coatings with embedded and intact liposomes is presented.},
  language  = {en}
}
@article{PoxsonKaradyGabrielssonetal.2017,
  author    = {Poxson, David J. and Karady, Michal and Gabrielsson, Roger and Alkattan, Aziz Y. and Gustavsson, Anna and Doyle, Siamsa M. and Robert, Stephanie and Ljung, Karin and Grebe, Markus and Simon, Daniel T. and Berggren, Magnus},
  title     = {Regulating plant physiology with organic electronics},
  series = {Proceedings of the National Academy of Sciences of the United States of America},
  volume    = {114},
  journal   = {Proceedings of the National Academy of Sciences of the United States of America},
  publisher = {National Acad. of Sciences},
  address   = {Washington},
  issn      = {0027-8424},
  doi       = {10.1073/pnas.1617758114},
  pages     = {4597 -- 4602},
  year      = {2017},
  abstract  = {The organic electronic ion pump (OEIP) provides flow-free and accurate delivery of small signaling compounds at high spatio-temporal resolution. To date, the application of OEIPs has been limited to delivery of nonaromatic molecules to mammalian systems, particularly for neuroscience applications. However, many long-standing questions in plant biology remain unanswered due to a lack of technology that precisely delivers plant hormones, based on cyclic alkanes or aromatic structures, to regulate plant physiology. Here, we report the employment of OEIPs for the delivery of the plant hormone auxin to induce differential concentration gradients and modulate plant physiology. We fabricated OEIP devices based on a synthesized dendritic polyelectrolyte that enables electrophoretic transport of aromatic substances. Delivery of auxin to transgenic Arabidopsis thaliana seedlings in vivo was monitored in real time via dynamic fluorescent auxin-response reporters and induced physiological responses in roots. Our results provide a starting point for technologies enabling direct, rapid, and dynamic electronic interaction with the biochemical regulation systems of plants.},
  language  = {en}
}
@phdthesis{Mitzscherling2015,
  author    = {Mitzscherling, Steffen},
  title     = {Polyelectrolyte multilayers for plasmonics and picosecond ultrasonics},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-80833},
  school      = {Universit{\"a}t Potsdam},
  pages     = {93},
  year      = {2015},
  abstract  = {This thesis investigates the application of polyelectrolyte multilayers in plasmonics and picosecond acoustics. The observed samples were fabricated by the spin-assisted layer-by-layer deposition technique that allowed a precise tuning of layer thickness in the range of few nanometers. The first field of interest deals with the interaction of light-induced localized surface plasmons (LSP) of rod-shaped gold nanoparticles with the particles' environment. The environment consists of an air phase and a phase of polyelectrolytes, whose ratio affects the spectral position of the LSP resonance. Measured UV-VIS spectra showed the shift of the LSP absorption peak as a function of the cover layer thickness of the particles. The data are modeled using an average dielectric function instead of the dielectric functions of air and polyelectrolytes. In addition using a measured dielectric function of the gold nanoparticles, the position of the LSP absorption peak could be simulated with good agreement to the data. The analytic model helps to understand the optical properties of metal nanoparticles in an inhomogeneous environment. The second part of this work discusses the applicability of PAzo/PAH and dye-doped PSS/PAH polyelectrolyte multilayers as transducers to generate hypersound pulses. The generated strain pulses were detected by time-domain Brillouin scattering (TDBS) using a pump-probe laser setup. Transducer layers made of polyelectrolytes were compared qualitatively to common aluminum transducers in terms of measured TDBS signal amplitude, degradation due to laser excitation, and sample preparation. The measurements proved that fast and easy prepared polyelectrolyte transducers provided stronger TDBS signals than the aluminum transducer. AFM topography measurements showed a degradation of the polyelectrolyte structures, especially for the PAzo/PAH sample. To quantify the induced strain, optical barriers were introduced to separate the transducer material from the medium of the hypersound propagation. Difficulties in the sample preparation prohibited a reliable quantification. But the experiments showed that a coating with transparent polyelectrolytes increases the efficiency of aluminum transducers and modifies the excited phonon distribution. The adoption of polyelectrolytes to the scientific field of picosecond acoustics enables a cheap and fast fabrication of transducer layers on most surfaces. In contrast to aluminum layers the polyelectrolytes are transparent over a wide spectral range. Thus, the strain modulation can be probed from surface and back.},
  language  = {en}
}
@article{NoteKoetzKosmella2006,
  author    = {Note, Carine and Koetz, Joachim and Kosmella, Sabine},
  title     = {Structural changes in poly(ethyleneimine) modified microemulsion},
  series = {Journal of colloid and interface science},
  volume    = {302},
  journal   = {Journal of colloid and interface science},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9797},
  doi       = {10.1016/j.jcis.2006.06.071},
  pages     = {662 -- 668},
  year      = {2006},
  abstract  = {The influence of branched poly(ethyleneimine) on the phase behavior of the system sodium dodecylsulfate/toluene-pentanol (1:1)/water has been studied. The isotropic microemulsions still exist when water is replaced with aqueous solutions of PEI (up to 30\% in weight), but their stability is significantly influenced. From a polymer concentration of 20 wt\%, the polymer enhances the solubilization of water in oil, changes the sign of the spontaneous curvature of the surfactant film, and induces an inversion of the microemulsion type from water-in-oil (L-2) to oil-in-water (L-1), by the formation of a bicontinuous channel. Further investigations show that the addition of polymer in the L-2 phase changes the droplet-droplet interactions as the conductivity drops and the percolation disappears. In the bicontinuous channel, higher viscosities can be detected, as well as a weak percolation followed by a steep increase of the conductivity, which can be related to evident structural changes in the system. DSC measurements allow then to follow the changes of the water properties in the system, from interfacial-water in the L-2 phase to free-water in the sponge-like phase. Finally, all the measurements performed permit to characterize the structural transitions in the system and to understand the role of the added polymer.},
  language  = {en}
}
@phdthesis{Mauser2006,
  author    = {Mauser, Tatjana},
  title     = {Multilayer capsules with stimuli-sensitive properties : pH-response and carbohydrate-sensing},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12529},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Polyelectrolyte microcapsules containing stimuli-responsive polymers have potential applications in the fields of sensors or actuators, stimulable microcontainers and controlled drug delivery. Such capsules were prepared, with the focus on pH-sensitivity and carbohydrate-sensing. First, pH-responsive polyelectrolyte capsules were produced by means of electrostatic layer-by-layer assembly of oppositely charged weak polyelectrolytes onto colloidal templates that were subsequently removed. The capsules were composed of poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) or poly(4-vinylpyridine) (P4VP) and PMA and varied considerably in their hydrophobicity and the influence of secondary interactions. These polymers were assembled onto CaCO3 and SiO2 particles with diameters of ~ 5 µm, and a new method for the removal of the silica template under mild conditions was proposed. The pH-dependent stability of PAH/PMA and P4VP/PMA capsules was studied by confocal laser scanning microscopy (CLSM). They were stable over a wide pH-range and exhibited a pronounced swelling at the edges of stability, which was attributed to uncompensated positive or negative charges within the multilayers. The swollen state could be stabilized when the electrostatic repulsion was counteracted by hydrogen-bonding, hydrophobic interactions or polymeric entanglement. This stabilization made it possible to reversibly swell and shrink the capsules by tuning the pH of the solution. The pH-dependent ionization degree of PMA was used to modulate the binding of calcium ions. In addition to the pH-sensitivity, the stability and the swelling degree of these capsules at a given pH could be modified, when the ionic strength of the medium was altered. The reversible swelling was accompanied by reversible permeability changes for low and high molecular weight substances. The permeability for glucose was evaluated by studying the time-dependence of the buckling of the capsule walls in glucose solutions and the reversible permeability modulation was used for the encapsulation of polymeric material. A theoretical model was proposed to explain the pH-dependent size variations that took into account an osmotic expanding force and an elastic restoring force to evaluate the pH-dependent size changes of weak polyelectrolyte capsules. Second, sugar-sensitive multilayers were assembled using the reversible covalent ester formation between the polysaccharide mannan and phenylboronic acid moieties that were grafted onto poly(acrylic acid) (PAA). The resulting multilayer films were sensitive to several carbohydrates, showing the highest sensitivity to fructose. The response to carbohydrates resulted from the competitive binding of small molecular weight sugars and mannan to the boronic acid groups within the film, and was observed as a fast dissolution of the multilayers, when they were brought into contact with the sugar-containing solution above a critical concentration. It was also possible to prepare carbohydrate-sensitive multilayer capsules, and their sugar-dependent stability was investigated by following the release of encapsulated rhodamine-labeled bovine serum albumin (TRITC-BSA).},
  language  = {en}
}
@phdthesis{Note2006,
  author    = {Note, Carine},
  title     = {Influence of hydrophobically modified polyelectrolytes on nanoparticle synthesis in self-organized systems and in water},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-11670},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {The formation of colloids by the controlled reduction, nucleation, and growth of inorganic precursor salts in different media has been investigated for more than a century. Recently, the preparation of ultrafine particles has received much attention since they can offer highly promising and novel options for a wide range of technical applications (nanotechnology, electrooptical devices, pharmaceutics, etc). The interest derives from the well-known fact that properties of advanced materials are critically dependent on the microstructure of the sample. Control of size, size distribution and morphology of the individual grains or crystallites is of the utmost importance in order to obtain the material characteristics desired. Several methods can be employed for the synthesis of nanoparticles. On the one hand, the reduction can occur in diluted aqueous or alcoholic solutions. On the other hand, the reduction process can be realized in a template phase, e.g. in well-defined microemulsion droplets. However, the stability of the nanoparticles formed mainly depends on their surface charge and it can be influenced with some added protective components. Quite different types of polymers, including polyelectrolytes and amphiphilic block copolymers, can for instance be used as protecting agents. The reduction and stabilization of metal colloids in aqueous solution by adding self-synthesized hydrophobically modified polyelectrolytes were studied in much more details. The polymers used are hydrophobically modified derivatives of poly(sodium acrylate) and of maleamic acid copolymers as well as the commercially available branched poly(ethyleneimine). The first notable result is that the polyelectrolytes used can act alone as both reducing and stabilizing agent for the preparation of gold nanoparticles. The investigation was then focused on the influence of the hydrophobic substitution of the polymer backbone on the reduction and stabilization processes. First of all, the polymers were added at room temperature and the reduction process was investigated over a longer time period (up to 8 days). In comparison, the reduction process was realized faster at higher temperature, i.e. 100°C. In both cases metal nanoparticles of colloidal dimensions can be produced. However, the size and shape of the individual nanoparticles mainly depends on the polymer added and the temperature procedure used. In a second part, the influence of the prior mentioned polyelectrolytes was investigated on the phase behaviour as well as on the properties of the inverse micellar region (L2 phase) of quaternary systems consisting of a surfactant, toluene-pentanol (1:1) and water. The majority of the present work has been made with the anionic surfactant sodium dodecylsulfate (SDS) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) since they can interact with the oppositely charged polyelectrolytes and the microemulsions formed using these surfactants present a large water-in-oil region. Subsequently, the polymer-modified microemulsions were used as new templates for the synthesis of inorganic particles, ranging from metals to complex crystallites, of very small size. The water droplets can indeed act as nanoreactors for the nucleation and growth of the particles, and the added polymer can influence the droplet size, the droplet-droplet interactions, as well as the stability of the surfactant film by the formation of polymer-surfactant complexes. One further advantage of the polymer-modified microemulsions is the possibility to stabilize the primary formed nanoparticles via a polymer adsorption (steric and/or electrostatic stabilization). Thus, the polyelectrolyte-modified nanoparticles formed can be redispersed without flocculation after solvent evaporation.},
  subject      = {Mikroemulsion},
  language  = {en}
}
@article{NoteKosmellaKoetz2006,
  author    = {Note, Carine and Kosmella, Sabine and Koetz, Joachim},
  title     = {Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions},
  series = {Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects},
  volume    = {290},
  journal   = {Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects},
  number    = {1-3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0927-7757},
  doi       = {10.1016/j.colsurfa.2006.05.018},
  pages     = {150 -- 156},
  year      = {2006},
  abstract  = {This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution. On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced. On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene-pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size. Nevertheless, the polymer acts already as a "template" during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed. The particle formation for both methods is checked by means of UV-vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM). (c) 2006 Elsevier B.V. All rights reserved.},
  language  = {en}
}
@phdthesis{Sinn2004,
  author    = {Sinn, Cornelia G.},
  title     = {Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in w{\"a}ssrigen L{\"o}sungen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001778},
  school      = {Universit{\"a}t Potsdam},
  year      = {2004},
  abstract  = {Ziel dieser Arbeit ist die Untersuchung der Ionenbindung an Polymeren und Lipidmembranen in w{\"a}ssrigen L{\"o}sungen. Im ersten Teil dieser Arbeit wurde der Einfluss verschiedener anorganischer Salze und Polyelektrolyte auf die Struktur des Wassers mit Hilfe Isothermer Mikrotitrationskalorimetrie (ITC) erforscht. Die Verd{\"u}nnungsw{\"a}rme der Salze wurde als Maß f{\"u}r die F{\"a}higkeit der Ionen, die geordnete Struktur des Wassers zu stabilisieren oder zu zerst{\"o}ren, verwendet. Die Verd{\"u}nnungsw{\"a}rmen konnten auf Hofmeister Effekte zur{\"u}ckgef{\"u}hrt werden. Im Anschluss daran wurde die Bindung von Ca2+ an Natrium- Poly(acryls{\"a}ure) (NaPAA) untersucht. Mit Hilfe von ITC und einer Ca2+- selektiven Elektrode wurde die Reaktionsenthalpie und Bindungsisotherme gemessen. Es wurde gezeigt, dass die Binding von Ca2+ - Ionen an NaPAA stark endotherm und daher entropiegetrieben ist. Anschließend wurde die Bindung von Ca2+ an die eindimensionale Polymerkette mit der an ein Lipidvesikel mit denselben funktioniellen Gruppen verglichen. Es wurde beobachtet, dass die Ionenbindung \–wie auch im Fall des Polymers- endotherm ist. Ein Vergleich der Ca2+- Bindung an die Lipidmembran mit der an das Polymer konnte zeigen, dass das Ion schw{\"a}cher an die Membran bindet. Im Zusammenhang mit diesen Experimenten wurde auch beobachtet, dass Ca2+ nicht nur an geladene, sondern auch an zwitterionische Lipidvesikel bindet. Schließlich wurde die Wechselwirkung zweier Salze, KCl and NaCl, mit einem neutralen Polymergel, PNIPAAM, und dem geladenen Polymer PAA untersucht. Mit Hilfe von Kalorimetrie und einer kaliumselektiven Elektrode wurde beobachtet, dass die Ionen mit beiden Polymeren wechselwirken, unabh{\"a}ngig davon, ob diese Ladungen tragen, oder nicht.},
  language  = {en}
}