@article{SchmelzbachTronickeDietrich2011, author = {Schmelzbach, C. and Tronicke, Jens and Dietrich, P.}, title = {Three-dimensional hydrostratigraphic models from ground-penetrating radar and direct-push data}, series = {Journal of hydrology}, volume = {398}, journal = {Journal of hydrology}, number = {3-4}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0022-1694}, doi = {10.1016/j.jhydrol.2010.12.023}, pages = {235 -- 245}, year = {2011}, abstract = {Three-dimensional models of hydraulic conductivity and porosity are essential to understand and simulate groundwater flow in heterogeneous geological environments. However, considering the inherent limitations of traditional hydrogeological field methods in terms of resolution, alternative field approaches are needed to establish such 3-D models with sufficient accuracy. In this study, we developed a workflow combining 3-D structural information extracted from ground penetrating radar (GPR) images with 1-D in situ physical-property estimates from direct-push (DP) logging to construct a 3-D hydrostratigraphic model. To illustrate this workflow, we collected an similar to 70 m x 90 m 100 MHz 3-D GPR data set over a shallow sedimentary aquifer system resolving six different GPR facies down to similar to 15 m depth. DP logs of the relative dielectric permittivity, the relative hydraulic conductivity, the cone resistance, the sleeve friction and the pore pressure provided crucial data (1) to establish a GPR velocity model for 3-D depth migration and to check the time-to-depth conversion of the GPR data, and (2) to construct a 3-D hydrostratigraphic model. This model was built by assigning porosity values, which were computed from the DP relative dielectric permittivity logs, and DP relative hydraulic conductivity estimates to the identified GPR facies. We conclude that the integration of 3-D GPR structural images and 1-D DP logs of target physical parameters provides an efficient way for detailed 3-D subsurface characterization as needed, for example, for groundwater flow simulations.}, language = {en} } @article{HirschmuellerKonstantinidisBauretal.2011, author = {Hirschm{\"u}ller, Anja and Konstantinidis, Lukas and Baur, Heiner and M{\"u}ller, Steffen and Mehlhorn, Alexander and Kontermann, Julia and Grosse, Ulrich and S{\"u}dkamp, Norbert P. and Helwig, Peter}, title = {Do changes in dynamic plantar pressure distribution, strength capacity and postural control after intra-articular calcaneal fracture correlate with clinical and radiological outcome?}, series = {Injury : international journal of the care of the injured}, volume = {42}, journal = {Injury : international journal of the care of the injured}, number = {10}, publisher = {Elsevier}, address = {Oxford}, issn = {0020-1383}, doi = {10.1016/j.injury.2010.09.040}, pages = {1135 -- 1143}, year = {2011}, abstract = {Fractures of the calcaneus are often associated with serious permanent disability, a considerable reduction in quality of life, and high socio-economic cost. Although some studies have already reported changes in plantar pressure distribution after calcaneal fracture, no investigation has yet focused on the patient's strength and postural control. Method: 60 patients with unilateral, operatively treated, intra-articular calcaneal fractures were clinically and biomechanically evaluated >1 year postoperatively (physical examination, SF-36, AOFAS score, lower leg isokinetic strength, postural control and gait analysis including plantar pressure distribution). Results were correlated to clinical outcome and preoperative radiological findings (Bohler angle, Zwipp and Sanders Score). Results: Clinical examination revealed a statistically significant reduction in range of motion at the tibiotalar and the subtalar joint on the affected side. Additionally, there was a statistically significant reduction of plantar flexor peak torque of the injured compared to the uninjured limb (p < 0.001) as well as a reduction in postural control that was also more pronounced on the initially injured side (standing duration 4.2 +/- 2.9 s vs. 7.6 +/- 2.1 s, p < 0.05). Plantar pressure measurements revealed a statistically significant pressure reduction at the hindfoot (p = 0.0007) and a pressure increase at the midfoot (p = 0.0001) and beneath the lateral forefoot (p = 0.037) of the injured foot. There was only a weak correlation between radiological classifications and clinical outcome but a moderate correlation between strength differences and the clinical questionnaires (CC 0.27-0.4) as well as between standing duration and the clinical questionnaires. Although thigh circumference was also reduced on the injured side, there was no important relationship between changes in lower leg circumference and strength suggesting that measurement of leg circumference may not be a valid assessment of maximum strength deficits. Self-selected walking speed was the parameter that showed the best correlation with clinical outcome (AOFAS score). Conclusion: Calcaneal fractures are associated with a significant reduction in ankle joint ROM, plantar flexion strength and postural control. These impairments seem to be highly relevant to the patients. Restoration of muscular strength and proprioception should therefore be aggressively addressed in the rehabilitation process after these fractures.}, language = {en} } @article{BaurHirschmuellerMuelleretal.2011, author = {Baur, Heiner and Hirschm{\"u}ller, Anja and M{\"u}ller, Steffen and Mayer, Frank}, title = {Neuromuscular activity of the peroneal muscle after foot orthoses therapy in runners}, series = {Medicine and science in sports and exercise : official journal of the American College of Sports Medicine}, volume = {43}, journal = {Medicine and science in sports and exercise : official journal of the American College of Sports Medicine}, number = {8}, publisher = {Lippincott Williams \& Wilkins}, address = {Philadelphia}, issn = {0195-9131}, doi = {10.1249/MSS.0b013e31820c64ae}, pages = {1500 -- 1506}, year = {2011}, abstract = {BAUR, H., A. HIRSCHMULLER, S. MULLER, and F. MAYER. Neuromuscular Activity of the Peroneal Muscle after Foot Orthoses Therapy in Runners. Med. Sci. Sports Exerc., Vol. 43, No. 8, pp. 1500-1506, 2011. Purpose: Foot orthoses are a standard option to treat overuse injury. Biomechanical data providing mechanisms of foot orthoses' effectiveness are sparse. Stability of the ankle joint complex might be a key factor. The purpose was therefore to analyze neuromuscular activity of the musculus peroneus longus in runners with overuse injury symptoms treated with foot orthoses. Methods: A total of 99 male and female runners with overuse injury symptoms randomized in a control group (CO) and an orthoses group (OR) were analyzed on a treadmill at 3.3 m.s(-1) before and after an 8-wk foot orthoses intervention. Muscular activity of the musculus peroneus longus was measured and quantified in the time domain (initial onset of activation (T-ini), time of maximal activity (T-max), total time of activation (T-tot)) and amplitude domain (amplitude in preactivation (A(pre)), weight acceptance (A(wa)), push-off (A(po))). Results: Peroneal activity in the time domain did not differ initially between CO and OR, and no effect was observed after therapy (T-ini: CO = -0.88 +/- 0.09, OR = -0.88 +/- 0.08 / T-max: CO = 0.14 +/- 0.06, OR = 0.15 +/- 0.06 / T-tot: CO = 0.40 +/- 0.09, OR = 0.41 +/- 0.09; P > 0.05). In preactivation (Apre), muscle activity was higher in OR after intervention (CO = 0.97 +/- 0.32, 95\% confidence interval = 0.90-1.05; OR = 1.18 +/- 0.43, 95\% confidence interval = 1.08-1.28; P = 0.003). There was no group or intervention effect during stance (A(wa): CO = 2.33 +/- 0.66, OR = 2.33 +/- 0.74 / A(po): CO = 0.80 +/- 0.41, OR = 0.88 +/- 0.40; P > 0.05). Conclusions: Enhanced muscle activation of the musculus peroneus longus in preactivation suggests an altered preprogrammed activity, which might lead to better ankle stability providing a possible mode of action for foot orthoses therapy.}, language = {en} } @article{MuellerMayerBauretal.2011, author = {M{\"u}ller, Steffen and Mayer, Patrizia and Baur, Heiner and Mayer, Frank}, title = {Higher velocities in isokinetic dynamometry a pilot study of new test mode with active compensation of inertia}, series = {Isokinetics and exercise science : official journal of the European Isokinetic Society}, volume = {19}, journal = {Isokinetics and exercise science : official journal of the European Isokinetic Society}, number = {2}, publisher = {IOS Press}, address = {Amsterdam}, issn = {0959-3020}, doi = {10.3233/IES-2011-0398}, pages = {63 -- 70}, year = {2011}, abstract = {Isokinetic dynamometry is a standard technique for strength testing and training. Nevertheless reliability and validity is limited due to inertia effects, especially for high velocities. Therefore in a first methodological approach the purpose was to evaluate a new isokinetic measurement mode including inertia compensation compared to a classic isokinetic measurement mode for single and multijoint movements at different velocities. Isokinetic maximum strength measurements were carried out in 26 healthy active subjects. Tests were performed using classic isokinetic and new isokinetic mode in random order. Maximum torque/force, maximum movement velocity and time for acceleration were calculated. For inter-instrument agreement Bland and Altman analysis, systematic and random error was quantified. Differences between both methods were assessed (ANOVA alpha = 0.05). Bland and Altman analysis showed the highest agreement between the two modes for strength and velocity measurements (bias: < +/- 1.1\%; LOA: < 14.2\%) in knee flexion/extension at slow isokinetic velocity (60 degrees/s). Least agreement (range: bias: -67.6\% +/- 119.0\%; LOA: 53.4\% 69.3\%) was observed for shoulder/arm test at high isokinetic velocity (360 degrees/s). The Isokin(new) mode showed higher maximum movement velocities (p < 0.05). For low isokinetic velocities the new mode agrees with the classic mode. Especially at high isokinetic velocities the new isokinetic mode shows relevant benefits coupled with a possible trade-off with the force/torque measurement. In conclusion, this study offers for the first time a comparison between the 'classical' and inertia-compensated isokinetic dynamometers indicating the advantages and disadvantages associated with each individual approach, particularly as they relate to medium or high velocities in testing and training.}, language = {en} } @article{HirschmuellerBaurMuelleretal.2011, author = {Hirschm{\"u}ller, Anja and Baur, Heiner and M{\"u}ller, Steffen and Helwig, Peter and Dickhuth, Hans-Hermann and Mayer, Frank}, title = {Clinical effectiveness of customised sport shoe orthoses for overuse injuries in runners a randomised controlled study}, series = {British journal of sports medicine : the journal of sport and exercise medicine}, volume = {45}, journal = {British journal of sports medicine : the journal of sport and exercise medicine}, number = {12}, publisher = {BMJ Publ. Group}, address = {London}, issn = {0306-3674}, doi = {10.1136/bjsm.2008.055830}, pages = {959 -- 965}, year = {2011}, abstract = {Background and objectives Treatment of chronic running-related overuse injuries by orthopaedic shoe orthoses is very common but not evidence-based to date. Hypothesis Polyurethane foam orthoses adapted to a participant's barefoot plantar pressure distribution are an effective treatment option for chronic overuse injuries in runners. Design Prospective, randomised, controlled clinical trial. Intervention 51 patients with running injuries were treated with custom-made, semirigid running shoe orthoses for 8 weeks. 48 served as a randomised control group that continued regular training activity without any treatment. Main outcome measures Evaluation was made by the validated pain questionnaire Subjective Pain Experience Scale, the pain disability index and a comfort index in the orthoses group (ICI). Results There were statistically significant differences between the orthoses and control groups at 8 weeks for the pain disability index (mean difference 3.2; 95\% CI 0.9 to 5.5) and the Subjective Pain Experience Scale (6.6; 2.6 to 10.6). The patients with orthoses reported a rising wearing comfort (pre-treatment ICI 69/100; post-treatment ICI 83/100) that was most pronounced in the first 4 weeks (ICI 80.4/100). Conclusion Customised polyurethane running shoe orthoses are an effective conservative therapy strategy for chronic running injuries with high comfort and acceptance of injured runners.}, language = {en} } @phdthesis{Risse2011, author = {Risse, Sarah}, title = {Processing in the perceptual span : investigations with the n+2-boundary paradigm}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60414}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Cognitive psychology is traditionally interested in the interaction of perception, cognition, and behavioral control. Investigating eye movements in reading constitutes a field of research in which the processes and interactions of these subsystems can be studied in a well-defined environment. Thereby, the following questions are pursued: How much information is visually perceived during a fixation, how is processing achieved and temporally coordinated from visual letter encoding to final sentence comprehension, and how do such processes reflect on behavior such as the control of the eyes' movements during reading. Various theoretical models have been proposed to account for the specific eye-movement behavior in reading (for a review see Reichle, Rayner, \& Pollatsek, 2003). Some models are based on the idea of shifting attention serially from one word to the next within the sentence whereas others propose distributed attention allocating processing resources to more than one word at a time. As attention is assumed to drive word recognition processes one major difference between these models is that word processing must either occur in strict serial order, or that word processing is achieved in parallel. In spite of this crucial difference in the time course of word processing, both model classes perform well on explaining many of the benchmark effects in reading. In fact, there seems to be not much empirical evidence that challenges the models to a point at which their basic assumptions could be falsified. One issue often perceived as being decisive in the debate on serial and parallel word processing is how not-yet-fixated words to the right of fixation affect eye movements. Specifically, evidence is discussed as to what spatial extent such parafoveal words are previewed and how this influences current and subsequent word processing. Four experiments investigated parafoveal processing close to the spatial limits of the perceptual span. The present work aims to go beyond mere existence proofs of previewing words at such spatial distances. Introducing a manipulation that dissociates the sources of long-range preview effects, benefits and costs of parafoveal processing can be investigated in a single analysis and the differing impact is tracked across a three-word target region. In addition, the same manipulation evaluates the role of oculomotor error as the cause of non-local distributed effects. In this respect, the results contribute to a better understanding of the time course of word processing inside the perceptual span and attention allocation during reading.}, language = {en} } @misc{BostonHaleVasishthetal.2011, author = {Boston, Marisa Ferrara and Hale, John T. and Vasishth, Shravan and Kliegl, Reinhold}, title = {Parallel processing and sentence comprehension difficulty}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57159}, year = {2011}, abstract = {Eye fixation durations during normal reading correlate with processing difficulty but the specific cognitive mechanisms reflected in these measures are not well understood. This study finds support in German readers' eyefixations for two distinct difficulty metrics: surprisal, which reflects the change in probabilities across syntactic analyses as new words are integrated, and retrieval, which quantifies comprehension difficulty in terms of working memory constraints. We examine the predictions of both metrics using a family of dependency parsers indexed by an upper limit on the number of candidate syntactic analyses they retain at successive words. Surprisal models all fixation measures and regression probability. By contrast, retrieval does not model any measure in serial processing. As more candidate analyses are considered in parallel at each word, retrieval can account for the same measures as surprisal. This pattern suggests an important role for ranked parallelism in theories of sentence comprehension.}, language = {en} } @phdthesis{Gendt2011, author = {Gendt, Anja}, title = {Eye movements under the control of working memory : the challenge of a reading-span task}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-69224}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {During reading oculomotor processes guide the eyes over the text. The visual information recorded is accessed, evaluated and processed. Only by retrieving the meaning of a word from the long-term memory, as well as through the connection and storage of the information about each individual word, is it possible to access the semantic meaning of a sentence. Therefore memory, and here in particular working memory, plays a pivotal role in the basic processes of reading. The following dissertation investigates to what extent different demands on memory and memory capacity have an effect on eye movement behavior while reading. The frequently used paradigm of the reading span task, in which test subjects read and evaluate individual sentences, was used for the experimental review of the research questions. The results speak for the fact that working memory processes have a direct effect on various eye movement measurements. Thus a high working memory load, for example, reduced the perceptual span while reading. The lower the individual working memory capacity of the reader was, the stronger was the influence of the working memory load on the processing of the sentence.}, language = {en} } @article{KaylerKaiserGessleretal.2011, author = {Kayler, Zachary and Kaiser, Michael and Gessler, Arthur and Ellerbrock, Ruth H. and Sommer, Michael}, title = {Application of delta C-13 and delta N-15 isotopic signatures of organic matter fractions sequentially separated from adjacent arable and forest soils to identify carbon stabilization mechanisms}, series = {Biogeosciences}, volume = {8}, journal = {Biogeosciences}, number = {10}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1726-4170}, doi = {10.5194/bg-8-2895-2011}, pages = {2895 -- 2906}, year = {2011}, abstract = {Identifying the chemical mechanisms behind soil carbon bound in organo-mineral complexes is necessary to determine the degree to which soil organic carbon is stabilized belowground. Analysis of delta C-13 and delta N-15 isotopic signatures of stabilized OM fractions along with soil mineral characteristics may yield important information about OM-mineral associations and their processing history. We anlayzed the delta C-13 and delta N-15 isotopic signatures from two organic matter (OM) fractions along with soil mineral proxies to identify the likely binding mechanisms involved. We analyzed OM fractions hypothesized to contain carbon stabilized through organo-mineral complexes: (1) OM separated chemically with sodium pyrophosphate (OM(PY)) and (2) OM occluded in micro-structures found in the chemical extraction residue (OM(ER)). Because the OM fractions were separated from five different soils with paired forest and arable land use histories, we could address the impact of land use change on carbon binding and processing mechanisms. We used partial least squares regression to analyze patterns in the isotopic signature of OM with established mineral and chemical proxies indicative for certain binding mechanisms. We found different mechanisms predominate in each land use type. For arable soils, the formation of OM(PY)-Ca-mineral associations was identified as an important OM binding mechanism. Therefore, we hypothesize an increased stabilization of microbial processed OM(PY) through Ca2+ interactions. In general, we found the forest soils to contain on average 10\% more stabilized carbon relative to total carbon stocks, than the agricultural counter part. In forest soils, we found a positive relationship between isotopic signatures of OM(PY) and the ratio of soil organic carbon content to soil surface area (SOC/SSA). This indicates that the OM(PY) fractions of forest soils represent layers of slower exchange not directly attached to mineral surfaces. From the isotopic composition of the OM(ER) fraction, we conclude that the OM in this fraction from both land use types have undergone a different pathway to stabilization that does not involve microbial processing, which may include OM which is highly protected within soil micro-structures.}, language = {en} } @article{GrossartFrindteDziallasetal.2011, author = {Grossart, Hans-Peter and Frindte, Katharina and Dziallas, Claudia and Eckert, Werner and Tang, Kam W.}, title = {Microbial methane production in oxygenated water column of an oligotrophic lake}, series = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {108}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, number = {49}, publisher = {National Acad. of Sciences}, address = {Washington}, issn = {0027-8424}, doi = {10.1073/pnas.1110716108}, pages = {19657 -- 19661}, year = {2011}, abstract = {The prevailing paradigm in aquatic science is that microbial methanogenesis happens primarily in anoxic environments. Here, we used multiple complementary approaches to show that microbial methane production could and did occur in the well-oxygenated water column of an oligotrophic lake (Lake Stechlin, Germany). Oversaturation of methane was repeatedly recorded in the well-oxygenated upper 10 m of the water column, and the methane maxima coincided with oxygen oversaturation at 6 m. Laboratory incubations of unamended epilimnetic lake water and inoculations of photoautotrophs with a lake-enrichment culture both led to methane production even in the presence of oxygen, and the production was not affected by the addition of inorganic phosphate or methylated compounds. Methane production was also detected by in-lake incubations of lake water, and the highest production rate was 1.8-2.4 nM.h(-1) at 6 m, which could explain 33-44\% of the observed ambient methane accumulation in the same month. Temporal and spatial uncoupling between methanogenesis and methanotrophy was supported by field and laboratory measurements, which also helped explain the oversaturation of methane in the upper water column. Potentially methanogenic Archaea were detected in situ in the oxygenated, methane-rich epilimnion, and their attachment to photoautotrophs might allow for anaerobic growth and direct transfer of substrates for methane production. Specific PCR on mRNA of the methyl coenzyme M reductase A gene revealed active methanogenesis. Microbial methane production in oxygenated water represents a hitherto overlooked source of methane and can be important for carbon cycling in the aquatic environments and water to air methane flux.}, language = {en} }