@phdthesis{Hainzl1999, author = {Hainzl, Sebastian}, title = {Erdbeben und selbstorganisierte Kritizit{\"a}t : Modellierung der raumzeitlichen Erdbebendynamik}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000130}, school = {Universit{\"a}t Potsdam}, year = {1999}, abstract = {Diese Arbeit besch{\"a}ftigt sich mit der Annahme, dass den Erdbeben ein selbstorganisiert kritischer Zustand der Erdkruste zugrunde liegt. Mit Hilfe einer Erweiterung bisheriger Modelle wird gezeigt, dass ein solcher Zustand nicht nur f{\"u}r die Gr{\"o}ssenverteilung der Erdbeben (Gutenberg-Richter Gesetz), sondern auch f{\"u}r das beobachtete raumzeitliche Auftreten, z.B. f{\"u}r das Omori-Gesetz f{\"u}r Nachbebenserien, verantwortlich sein kann. Desweiteren wird die Frage nach der Vorhersagbarkeit grosser Erdbeben in solchen Modellsimulationen untersucht.}, language = {de} } @phdthesis{Zoeller1999, author = {Z{\"o}ller, Gert}, title = {Analyse raumzeitlicher Muster in Erdbebendaten}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000122}, school = {Universit{\"a}t Potsdam}, year = {1999}, abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit der Charakterisierung von Seismizit{\"a}t anhand von Erdbebenkatalogen. Es werden neue Verfahren der Datenanalyse entwickelt, die Aufschluss dar{\"u}ber geben sollen, ob der seismischen Dynamik ein stochastischer oder ein deterministischer Prozess zugrunde liegt und was daraus f{\"u}r die Vorhersagbarkeit starker Erdbeben folgt. Es wird gezeigt, dass seismisch aktive Regionen h{\"a}ufig durch nichtlinearen Determinismus gekennzeichent sind. Dies schließt zumindest die M{\"o}glichkeit einer Kurzzeitvorhersage ein. Das Auftreten seismischer Ruhe wird h{\"a}ufig als Vorl{\"a}uferphaenomen f{\"u}r starke Erdbeben gedeutet. Es wird eine neue Methode pr{\"a}sentiert, die eine systematische raumzeitliche Kartierung seismischer Ruhephasen erm{\"o}glicht. Die statistische Signifikanz wird mit Hilfe des Konzeptes der Ersatzdaten bestimmt. Als Resultat erh{\"a}lt man deutliche Korrelationen zwischen seismischen Ruheperioden und starken Erdbeben. Gleichwohl ist die Signifikanz daf{\"u}r nicht hoch genug, um eine Vorhersage im Sinne einer Aussage {\"u}ber den Ort, die Zeit und die St{\"a}rke eines zu erwartenden Hauptbebens zu erm{\"o}glichen.}, language = {en} } @phdthesis{Martin2005, author = {Martin, Sebastian}, title = {Subduction zone wave guides : deciphering slab structure using intraslab seismicity at the Chile-Peru subduction zone}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5820}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Subduction zones are regions of intense earthquake activity up to great depth. Sources are located inside the subducting lithosphere and, as a consequence, seismic radiation from subduction zone earthquakes is strongly affected by the interior slab structure. The wave field of these intraslab events observed in the forearc region is profoundly influenced by a seismically slow layer atop the slab surface. This several kilometer thick low-velocity channel (wave guide) causes the entrapment of seismic energy producing strong guided wave phases that appear in P onsets in certain regions of the forearc. Observations at the Chile-Peru subduction zone presented here, as well as observations at several other circum-pacific subduction zones show such signals. Guided wave analysis contributes details of immense value regarding the processes near the slab surface, such as layering of subducted lithosphere, source locations of intraslab seismicity and most of all, range and manner of mineralogical phase transitions. Seismological data stem from intermediate depth events (depth range 70 km - 300 km) recorded in northern Chile near 21 Grad S during the collaborative research initiative " Deformation Processes in the Andes" (SFB 267). A subset of stations - all located within a slab-parallel transect close to 69 Grad W - show low-frequency first arrivals (2 Hz), sometimes followed by a second high-frequency phase. We employ 2-dimensional finite-difference simulations of complete P-SV wave propagation to explore the parameter space of subduction zone wave guides and explain the observations. Key processes underlying the guided wave propagation are studied: Two distinct mechanisms of decoupling of trapped energy from the wave guide are analyzed - a prerequisite to observe the phases at stations located at large distances from the wave guide (up to 100 km). Variations of guided wave effects perpendicular to the strike of the subduction zone are investigated, such as the influence of phases traveling in the fast slab. Further, the merits and limits of guided wave analysis are assessed. Frequency spectra of the guided wave onsets prove to be a robust quantity that captures guided wave characteristics at subduction zones including higher mode excitation. They facilitate the inference of wave guide structure and source positioning: The peak frequency of the guided wave fundamental mode is associated with a certain combination of layer width and velocity contrast. The excitation strength of the guided wave fundamental mode and higher modes is associated with source position and orientation relative to the low-velocity layer. The guided wave signals at the Chile-Peru subduction zone are caused by energy that leaks from the subduction zone wave guide. On the one hand, the bend shape of the slab allows for leakage at a depth of 100 km. On the other, equalization of velocities between the wave guide and the host rocks causes further energy leakage at the contact zone between continental and oceanic crust (70 km depth). Guided waves bearing information on deep slab structure can therefore be recorded at specific regions in the forearc. These regions are determined based on slab geometry, and their locations coincide with the observations. A number of strong constraints on the structure of the Chile-Peru slab are inferred: The deep wave guide for intraslab events is formed by a layer of 2 km average width that remains seismically slow (7 percent velocity reduction compared to surrounding mantle). This low-velocity layer at the top of the Chile-Peru slab is imaged from a depth of 100 km down to at least 160 km. Intermediate depth events causing the observed phases are located inside the layer or directly beneath it in the slab mantle. The layer is interpreted as partially eclogized lower oceanic crust persisting to depth beyond the volcanic arc.}, subject = {Anden}, language = {en} } @phdthesis{Roessler2006, author = {R{\"o}ßler, Dirk}, title = {Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7758}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60\% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting.}, subject = {Seismologie}, language = {en} } @misc{RoesslerKruegerOhrnberger2007, author = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias}, title = {Rupture propagation of recent large TsE off-coast Sumatra and Java}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13039}, year = {2007}, abstract = {The spatio-temporal evolution of the three recent tsunamogenic earthquakes (TsE) off-coast N-Sumatra (Mw9.3), 28/03/2005 (Mw8.5) off-coast Nias, on 17/07/2006 (Mw7.7) off-coast Java. Start time, duration, and propagation of the rupture are retrieved. All parameters can be obtained rapidly after recording of the first-arrival phases in near-real time processing. We exploit semblance analysis, backpropagation and broad-band seismograms within 30°-95° distance. Image enhancement is reached by stacking the semblance of arrays within different directions. For the three events, the rupture extends over about 1150, 150, and 200km, respectively. The events in 2004, 2005, and 2006 had source durations of at least 480s, 120s, and 180s, respectively. We observe unilateral rupture propagation for all events except for the rupture onset and the Nias event, where there is evidence for a bilateral start of the rupture. Whereas average rupture speed of the events in 2004 and 2005 is in the order of the S-wave speed (≈2.5-3km/s), unusually slow rupturing (≈1.5 km/s) is indicated for the July 2006 event. For the July 2006 event we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power generally increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.}, language = {en} } @article{RoesslerKruegerOhrnberger2007, author = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias}, title = {Rupture propagation of the TsE (Mw7.7) on 17 July 2006 off-coast Java}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12964}, year = {2007}, abstract = {The Mw=7.7 tsunamogenic earthquake (TsE) on 17 July 2006, 08:19:28 shock the Indian Ocean at about 15 km depth off-coast Java, Indonesia. It caused a local tsunami with wave heights exceeding 2 m. The death toll reached several hundred. Thousands of people were displaced. By means of standard array methods, we have investigated the propagation and the extent of the rupture front of the causative earthquake. Waveform similarity is expressed by means of the semblance. We back-propagate the semblance for first-arrival phases recorded at broad-band stations within teleseismic distances (30°-95°). Image enhancement is realised by stacking the semblance of 8 arrays within different epicentral and azimuthal directions. From teleseismic observations we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE and source duration >125 s. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Unusually slow rupturing (≈1.5 km/s) is indicated. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.}, language = {en} } @misc{KruegerOhrnbergerRoessler2008, author = {Kr{\"u}ger, Frank and Ohrnberger, Matthias and R{\"o}ßler, Dirk}, title = {Rupture imaging of large earthquakes with a poststack isochrone migration method}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-18395}, year = {2008}, abstract = {Rapid and robust characterization of large earthquakes in terms of their spatial extent and temporal duration is of high importance for disaster mitigation and early warning applications. Backtracking of seismic P-waves was successfully used by several authors to image the rupture process of the great Sumatra earthquake (26.12.2004) using short period and broadband arrays. We follow here an approach of Walker et al. to backtrack and stack broadband waveforms from global network stations using traveltimes for a global Earth model to obtain the overall spatio-temporal development of the energy radiation of large earthquakes in a quick and robust way. We present results for selected events with well studied source processes (Kokoxili 14.11.2001, Tokachi-Oki 25.09.2003, Nias 28.03.2005). Further, we apply the technique in a semi-real time fashion to broadband data of earthquakes with a broadband magnitude >= 7 (roughly corresponding to Mw 6.5). Processing is based on first automatic detection messages from the GEOFON extended virtual network (GEVN).}, language = {en} } @misc{RoesslerKruegerOhrnbergeretal.2008, author = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Ehlert, Lutz}, title = {Automatic near real-time characterisation of large earthquakes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-20191}, year = {2008}, abstract = {An der Universit{\"a}t Potsdam wird seit 2008 ein automatisiertes Verfahren angewandt, um Bruchparamter großer Erdbeben in quasi-Echtzeit, d.h. wenige Minuten nachdem sich das Beben ereignet hat, zu bestimmen und der {\"O}ffentlichkeit via Internet zur Verf{\"u}gung zu stellen. Es ist vorgesehen, das System in das Deutsch-Indonesische Tsunamifr{\"u}hwarnsystem (GITEWS) zu integrieren, f{\"u}r das es speziell konfiguriert ist. Wir bestimmen insbesondere die Dauer und die Ausdehnung des Erdbebens, sowie dessen Bruchgeschwindigkeit und -richtung. Dabei benutzen wir die Seismogramme der zuerst eintreffenden P Wellen vom Breitbandstationen in teleseimischer Entfernung vom Beben sowie herk{\"o}mmliche Arrayverfahren in teilweise modifizierter Form. Die Semblance wir als {\"A}hnlichkeitsmaß verwendet, um Seismogramme eines Stationsnetzes zu vergleichen. Im Falle eines Erdbebens ist die Semblance unter Ber{\"u}cksichtigung des Hypozentrums zur Herdzeit und w{\"a}hrend des Bruchvorgangs deutlich zeitlich und r{\"a}umlich erh{\"o}ht und konzentriert. Indem wir die Ergebnisse verschiedener Stationsnetzwerke kombinieren, erreichen wir Unabh{\"a}ngigkeit von der Herdcharakteristik und eine raum-zeitliche Aufl{\"o}sung, die es erlaubt die o.g. Parameter abzuleiten. In unserem Beitrag skizzieren wir die Methode. Anhand der beiden M8.0 Benkulu Erdbeben (Sumatra, Indonesien) vom 12.09.2007 und dem M8.0 Sichuan Ereignis (China) vom 12.05.2008 demonstrieren wir Aufl{\"o}sungsm{\"o}glichkeiten und vergleichen die Ergebnisse der automatisierten Echtzeitanwendung mit nachtr{\"a}glichen Berechnungen. Weiterhin stellen wir eine Internetseite zur Verf{\"u}gung, die die Ergebnisse pr{\"a}sentiert und animiert. Diese kann z.B. in geowissenschaftlichen Einrichtungen an Computerterminals gezeigt werden. Die Internetauftritte haben die folgenden Adressen: http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack/openday http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack}, language = {en} } @misc{RoesslerKruegerOhrnberger2008, author = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias}, title = {Rupture Propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29195}, year = {2008}, abstract = {We study the rupture propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake. We apply array techniques such as semblance vespagram analysis to P waves recorded at seismic broadband station within 30-100° epicentral distance. By combination of multiple large aperture station groups spatial and temporal resolution is enhanced and problems due source directivity and source mechanism are avoided. We find that seismic energy was released for at least 110 s. Propagating unilaterally at sub-shear rupture velocity of about 2.5 km/s in NE direction, the earthquake reaches a lateral extent of more than 300 km. Whereas high semblance during within 70 s from rupture start indicates simple propagation more complex source processes are indicated thereafter by decreases coherency in seismograms. At this stage of the event coherency is low but significantly above noise level. We emphasize that first result of our computations where obtain within 30 minutes after source time by using an atomized algorithm. This procedure has been routinely and globally applied to major earthquakes. Results are made public through internet.}, language = {en} } @phdthesis{Hakimhashemi2009, author = {Hakimhashemi, Amir Hossein}, title = {Time-dependent occurrence rates of large earthquakes in the Dead Sea fault zone and applications to probabilistic seismic hazard assessments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52486}, school = {Universit{\"a}t Potsdam}, year = {2009}, abstract = {Die relativ hohe seismische Aktivit{\"a}t der Tote-Meer-St{\"o}rungszone (Dead Sea Fault Zone - DSFZ) ist mit einem hohen Gefahrenpotential verbunden, welches zu einem erheblichen Erdbebenrisiko f{\"u}r die Ballungszentren in den L{\"a}ndern Syrien, Libanon, Pal{\"a}stina, Jordanien und Israel f{\"u}hrt. Eine Vielzahl massiver, zerst{\"o}rerischer Erdbeben hat sich in diesem Raum in den letzten zwei Jahrtausenden ereignet. Ihre Wiederholungsrate zeigt Anzeichen f{\"u}r eine zeitliche Abh{\"a}ngigkeit, insbesondere wenn lange Zeitr{\"a}ume in Betracht gezogen werden. Die Ber{\"u}cksichtigung der zeitlichen Abh{\"a}ngigkeit des Auftretens von Erdbeben ist f{\"u}r eine realistische seismische Gef{\"a}hrdungseinsch{\"a}tzung von großer Bedeutung. Ziel der vorliegenden Arbeit ist es, anhand des zeitabh{\"a}ngigen Auftretens von Erdbeben eine robuste wahrscheinlichkeitstheoretische seismische Gef{\"a}hrdungseinsch{\"a}tzung am Beispiel der DSFZ zu entwickeln. Mittels dieser Methode soll die zeitliche Abh{\"a}ngigkeit des Auftretens von großen Erdbeben (Mw ≥ 6) untersucht und somit eine Gef{\"a}hrdungseinsch{\"a}tzung f{\"u}r das Untersuchungsgebiet getroffen werden. Prim{\"a}r gilt es zu pr{\"u}fen, ob das Auftreten von großen Erdbeben tats{\"a}chlich einer zeitlichen Abh{\"a}ngigkeit unterliegt und wenn ja, inwiefern diese bestimmt werden kann. Zu diesem Zweck werden insgesamt vier zeitabh{\"a}ngige statistische Verteilungen (Weibull, Gamma, Lognormal und Brownian Passage Time (BPT)) sowie die zeitunabh{\"a}ngige Exponentialverteilung (Poisson-Prozess) getestet. Zur Absch{\"a}tzung der jeweiligen Modellparameter wird eine modifizierte Methode der gewichteten Maximum-Likelihood-Sch{\"a}tzung (MLE) verwendet. Um einzusch{\"a}tzen, ob die Wiederholungsrate von Erdbeben einer unimodalen oder multimodalen Form folgt, wird ein nichtparametrischer Bootstrap-Test f{\"u}r Multimodalit{\"a}t durchgef{\"u}hrt. Im Falle einer multimodalen Form wird neben der MLE zus{\"a}tzlich eine Erwartungsmaximierungsmethode (EM) herangezogen. Zur Auswahl des am besten geeigneten Modells wird zum einem das Bayesschen Informationskriterium (BIC) und zum anderen der modifizierte Kolmogorow-Smirnow-Goodness-of-Fit-Test angewendet. Abschließend werden mittels der Bootstrap-Methode die Konfidenzintervalle der gesch{\"a}tzten Parameter berechnet. Als Datengrundlage werden Erdbeben mit Mw ≥ 6 seit dem Jahre 300 n. Chr. herangezogen. Das Untersuchungsgebiet erstreckt sich von 29.5° N bis 37° N und umfasst ein ca. 40 km breites Gebiet entlang der DSFZ. Aufgrund der seismotektonischen Situation im Untersuchungsgebiet wird zwischen einer s{\"u}dlichen, zentralen und n{\"o}rdlichen Subzone unterschieden. Dabei kann die s{\"u}dliche Subzone aus Mangel an Daten nicht f{\"u}r die Analysen herangezogen werden. Die Ergebnisse f{\"u}r die zentrale Subzone zeigen keinen signifikanten multimodalen Verlauf der Wiederholungsrate von Erdbeben. Des Weiteren ist kein signifikanter Unterschied zwischen den zeitabh{\"a}ngigen und dem zeitunabh{\"a}ngigem Modell zu verzeichnen. Da das zeitunabh{\"a}ngige Modell vergleichsweise einfach interpretierbar ist, wird die Wiederholungsrate von Erdbeben in dieser Subzone unter Annahme der Exponentialverteilungs-Hypothese abgesch{\"a}tzt. Sie wird demnach als zeitunabh{\"a}ngig betrachtet und betr{\"a}gt 9.72 * 10-3 Erdbeben (mit Mw ≥ 6) pro Jahr. Einen besonderen Fall stellt die n{\"o}rdliche Subzone dar. In diesem Gebiet tritt im Durchschnitt alle 51 Jahre ein massives Erdbeben (Mw ≥ 6) auf. Das letzte Erdbeben dieser Gr{\"o}ße ereignete sich 1872 und liegt somit bereits 137 Jahre zur{\"u}ck. Somit ist in diesem Gebiet ein Erdbeben dieser St{\"a}rke {\"u}berf{\"a}llig. Im statistischen Mittel liegt die Zeit zwischen zwei Erdbeben zu 96\% unter 137 Jahren. Zudem wird eine deutliche zeitliche Abh{\"a}ngigkeit der Erdbeben-Wiederauftretensrate durch die Ergebnisse der in der Arbeit neu entwickelten statistischen Verfahren best{\"a}tigt. Dabei ist festzustellen, dass die Wiederholungsrate insbesondere kurz nach einem Erdbeben eine sehr hohe zeitliche Abh{\"a}ngigkeit aufweist. Am besten repr{\"a}sentiert werden die seismischen Bedingungen in der genannten Subzone durch ein bi-modales Weibull-Weibull-Modell. Die Wiederholungsrate ist eine glatte Zeitfunktion, welche zwei H{\"a}ufungen von Datenpunkten in der Zeit nach dem Erdbeben zeigt. Dabei umfasst die erste H{\"a}ufung einen Zeitraum von 80 Jahren, ausgehend vom Zeitpunkt des jeweiligen Bebens. Innerhalb dieser Zeitspanne ist die Wiederholungsrate extrem zeitabh{\"a}ngig. Die Wiederholungsrate direkt nach einem Beben ist sehr niedrig und steigert sich in den folgenden 10 Jahren erheblich bis zu einem Maximum von 0.024 Erdbeben/Jahr. Anschließend sinkt die Rate und erreicht ihr Minimum nach weiteren 70 Jahren mit 0.0145 Erdbeben/Jahr. An dieses Minimum schließt sich die zweite H{\"a}ufung von Daten an, dessen Dauer abh{\"a}ngig von der Erdbebenwiederholungszeit ist. Innerhalb dieses Zeitfensters nimmt die Erdbeben-Wiederauftretensrate ann{\"a}hernd konstant um 0.015 Erdbeben/Jahr zu. Diese Ergebnisse bilden die Grundlage f{\"u}r eine zeitabh{\"a}ngige probabilistische seismische Gef{\"a}hrdungseinsch{\"a}tzung (PSHA) f{\"u}r die seismische Quellregion, die den n{\"o}rdlichen Raum der DSFZ umfasst.}, language = {en} }