@phdthesis{Ramos2018, author = {Ramos, Catalina}, title = {Structure and petrophysical properties of the Southern Chile subduction zone along 38.25°S from seismic data}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-409183}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 111}, year = {2018}, abstract = {Active and passive source data from two seismic experiments within the interdisciplinary project TIPTEQ (from The Incoming Plate to mega Thrust EarthQuake processes) were used to image and identify the structural and petrophysical properties (such as P- and S-velocities, Poisson's ratios, pore pressure, density and amount of fluids) within the Chilean seismogenic coupling zone at 38.25°S, where in 1960 the largest earthquake ever recorded (Mw 9.5) occurred. Two S-wave velocity models calculated using traveltime and noise tomography techniques were merged with an existing velocity model to obtain a 2D S-wave velocity model, which gathered the advantages of each individual model. In a following step, P- and S-reflectivity images of the subduction zone were obtained using different pre stack and post-stack depth migration techniques. Among them, the recent prestack line-drawing depth migration scheme yielded revealing results. Next, synthetic seismograms modelled using the reflectivity method allowed, through their input 1D synthetic P- and S-velocities, to infer the composition and rocks within the subduction zone. Finally, an image of the subduction zone is given, jointly interpreting the results from this work with results from other studies. The Chilean seismogenic coupling zone at 38.25°S shows a continental crust with highly reflective horizontal, as well as (steep) dipping events. Among them, the Lanalhue Fault Zone (LFZ), which is interpreted to be east-dipping, is imaged to very shallow depths. Some steep reflectors are observed for the first time, for example one near the coast, related to high seismicity and another one near the LFZ. Steep shallow reflectivity towards the volcanic arc could be related to a steep west-dipping reflector interpreted as fluids and/or melts, migrating upwards due to material recycling in the continental mantle wedge. The high resolution of the S-velocity model in the first kilometres allowed to identify several sedimentary basins, characterized by very low P- and S-velocities, high Poisson's ratios and possible steep reflectivity. Such high Poisson's ratios are also observed within the oceanic crust, which reaches the seismogenic zone hydrated due to bending-related faulting. It is interpreted to release water until reaching the coast and under the continental mantle wedge. In terms of seismic velocities, the inferred composition and rocks in the continental crust is in agreement with field geology observations at the surface along the proflle. Furthermore, there is no requirement to call on the existence of measurable amounts of present-day fluids above the plate interface in the continental crust of the Coastal Cordillera and the Central Valley in this part of the Chilean convergent margin. A large-scale anisotropy in the continental crust and upper mantle, previously proposed from magnetotelluric studies, is proposed from seismic velocities. However, quantitative studies on this topic in the continental crust of the Chilean seismogenic zone at 38.25°S do not exist to date.}, language = {en} } @article{StankiewiczMunozRitteretal.2011, author = {Stankiewicz, Jacek and Munoz, G. and Ritter, Oliver and Bedrosian, Paul A. and Ryberg, Trond and Weckmann, Ute and Weber, Michael H.}, title = {Shallow lithological structure across the Dead Sea Transform derived from geophysical experiments}, series = {Geochemistry, geophysics, geosystems}, volume = {12}, journal = {Geochemistry, geophysics, geosystems}, number = {3-4}, publisher = {American Geophysical Union}, address = {Washington}, issn = {1525-2027}, doi = {10.1029/2011GC003678}, pages = {15}, year = {2011}, abstract = {In the framework of the DEad SEa Rift Transect (DESERT) project a 150 km magnetotelluric profile consisting of 154 sites was carried out across the Dead Sea Transform. The resistivity model presented shows conductive structures in the western section of the study area terminating abruptly at the Arava Fault. For a more detailed analysis we performed a joint interpretation of the resistivity model with a P wave velocity model from a partially coincident seismic experiment. The technique used is a statistical correlation of resistivity and velocity values in parameter space. Regions of high probability of a coexisting pair of values for the two parameters are mapped back into the spatial domain, illustrating the geographical location of lithological classes. In this study, four regions of enhanced probability have been identified, and are remapped as four lithological classes. This technique confirms the Arava Fault marks the boundary of a highly conductive lithological class down to a depth of similar to 3 km. That the fault acts as an impermeable barrier to fluid flow is unusual for large fault zone, which often exhibit a fault zone characterized by high conductivity and low seismic velocity. At greater depths it is possible to resolve the Precambrian basement into two classes characterized by vastly different resistivity values but similar seismic velocities. The boundary between these classes is approximately coincident with the Al Quweira Fault, with higher resistivities observed east of the fault. This is interpreted as evidence for the original deformation along the DST originally taking place at the Al Quweira Fault, before being shifted to the Arava Fault.}, language = {en} } @misc{RubeyBruneHeineetal.2017, author = {Rubey, Michael and Brune, Sascha and Heine, Christian and Davies, D. Rhodri and Williams, Simon E. and M{\"u}ller, R. Dietmar}, title = {Global patterns in Earth's dynamic topography since the Jurassic}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, number = {623}, issn = {1866-8372}, doi = {10.25932/publishup-41824}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418241}, pages = {899 -- 919}, year = {2017}, abstract = {We evaluate the spatial and temporal evolution of Earth's long-wavelength surface dynamic topography since the Jurassic using a series of high-resolution global mantle convection models. These models are Earth-like in terms of convective vigour, thermal structure, surface heat-flux and the geographic distribution of heterogeneity. The models generate a degree-2-dominated spectrum of dynamic topography with negative amplitudes above subducted slabs (i.e. circum-Pacific regions and southern Eurasia) and positive amplitudes elsewhere (i.e. Africa, north-western Eurasia and the central Pacific). Model predictions are compared with published observations and subsidence patterns from well data, both globally and for the Australian and southern African regions. We find that our models reproduce the long-wavelength component of these observations, although observed smaller-scale variations are not reproduced. We subsequently define "geodynamic rules" for how different surface tectonic settings are affected by mantle processes: (i) locations in the vicinity of a subduction zone show large negative dynamic topography amplitudes; (ii) regions far away from convergent margins feature long-term positive dynamic topography; and (iii) rapid variations in dynamic support occur along the margins of overriding plates (e.g. the western US) and at points located on a plate that rapidly approaches a subduction zone (e.g. India and the Arabia Peninsula). Our models provide a predictive quantitative framework linking mantle convection with plate tectonics and sedimentary basin evolution, thus improving our understanding of how subduction and mantle convection affect the spatio-temporal evolution of basin architecture.}, language = {en} } @article{JoziNajafabadiHaberlandLeBretonetal.2022, author = {Jozi Najafabadi, Azam and Haberland, Christian and Le Breton, Eline and Handy, Mark R. and Verwater, Vincent F. and Heit, Benjamin and Weber, Michael}, title = {Constraints on crustal structure in the vicinity of the adriatic indenter (European Alps) from Vp and Vp/Vs local earthquake tomography}, series = {Journal of geophysical research : Solid earth}, volume = {127}, journal = {Journal of geophysical research : Solid earth}, number = {2}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9313}, doi = {10.1029/2021JB023160}, pages = {22}, year = {2022}, abstract = {In this study, 3-D models of P-wave velocity (Vp) and P-wave and S-wave ratio (Vp/Vs) of the crust and upper mantle in the Eastern and eastern Southern Alps (northern Italy and southern Austria) were calculated using local earthquake tomography (LET). The data set includes high-quality arrival times from well-constrained hypocenters observed by the dense, temporary seismic networks of the AlpArray AASN and SWATH-D. The resolution of the LET was checked by synthetic tests and analysis of the model resolution matrix. The small inter-station spacing (average of similar to 15 km within the SWATH-D network) allowed us to image crustal structure at unprecedented resolution across a key part of the Alps. The derived P velocity model revealed a highly heterogeneous crustal structure in the target area. One of the main findings is that the lower crust is thickened, forming a bulge at 30-50 km depth just south of and beneath the Periadriatic Fault and the Tauern Window. This indicates that the lower crust decoupled both from its mantle substratum as well as from its upper crust. The Moho, taken to be the iso-velocity contour of Vp = 7.25 km/s, agrees with the Moho depth from previous studies in the European and Adriatic forelands. It is shallower on the Adriatic side than on the European side. This is interpreted to indicate that the European Plate is subducted beneath the Adriatic Plate in the Eastern and eastern Southern Alps.}, language = {en} } @phdthesis{BaumannWilke2013, author = {Baumann-Wilke, Maria}, title = {Combining body wave tomography, surface wave inversion, seismic interferometry and laboratory measurements to characterize the black shales on Bornholm at different scales}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-69007}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {Black shales are sedimentary rocks with a high content of organic carbon, which leads to a dark grayish to black color. Due to their potential to contain oil or gas, black shales are of great interest for the support of the worldwide energy supply. An integrated seismic investigation of the Lower Palaeozoic black shales was carried out at the Danish island Bornholm to locate the shallow-lying Alum Shale layer and its surrounding formations and to characterize its potential as a source rock. Therefore, two seismic experiments at a total of three crossing profiles were carried out in October 2010 and in June 2012 in the southern part of the island. Two different active measurements were conducted with either a weight drop source or a minivibrator. Additionally, the ambient noise field was recorded at the study location over a time interval of about one day, and also a laboratory analysis of borehole samples was carried out. The seismic profiles were positioned as close as possible to two scientific boreholes which were used for comparative purposes. The seismic field data was analyzed with traveltime tomography, surface wave inversion and seismic interferometry to obtain the P-wave and S-wave velocity models of the subsurface. The P-wave velocity models which were determined for all three profiles clearly locate the Alum Shale layer between the Komstad Limestone layer on top and the L{\ae}s{\aa} Sandstone Formation at the base of the models. The black shale layer has P-wave velocities around 3 km/s which are lower compared to the adjacent formations. Due to a very good agreement of the sonic log and the vertical velocity profiles of the two seismic lines, which are directly crossing the borehole where the sonic log was conducted, the reliability of the traveltime tomography is proven. A correlation of the seismic velocities with the content of organic carbon is an important task for the characterization of the reservoir properties of a black shale formation. It is not possible without calibration but in combination with a full 2D tomographic image of the subsurface it gives the subsurface distribution of the organic material. The S-wave model obtained with surface wave inversion of the vibroseis data of one of the profiles images the Alum Shale layer also very well with S-wave velocities around 2 km/s. Although individual 1D velocity models for each of the source positions were determined, the subsurface S-wave velocity distribution is very uniform with a good match between the single models. A really new approach described here is the application of seismic interferometry to a really small study area and a quite short time interval. Also new is the selective procedure of only using time windows with the best crosscorrelation signals to achieve the final interferograms. Due to the small scale of the interferometry even P-wave signals can be observed in the final crosscorrelations. In the laboratory measurements the seismic body waves were recorded for different pressure and temperature stages. Therefore, samples of different depths of the Alum Shale were available from one of the scientific boreholes at the study location. The measured velocities have a high variance with changing pressure or temperature. Recordings with wave propagation both parallel and perpendicular to the bedding of the samples reveal a great amount of anisotropy for the P-wave velocity, whereas the S-wave velocity is almost independent of the wave direction. The calculated velocity ratio is also highly anisotropic with very low values for the perpendicular samples and very high values for the parallel ones. Interestingly, the laboratory velocities of the perpendicular samples are comparable to the velocities of the field experiments indicating that the field measurements are sensitive to wave propagation in vertical direction. The velocity ratio is also calculated with the P-wave and S-wave velocity models of the field experiments. Again, the Alum Shale can be clearly separated from the adjacent formations because it shows overall very low vP/vS ratios around 1.4. The very low velocity ratio indicates the content of gas in the black shale formation. With the combination of all the different methods described here, a comprehensive interpretation of the seismic response of the black shale layer can be made and the hydrocarbon source rock potential can be estimated.}, language = {en} }