@article{ChengDingZhangetal.2014, author = {Cheng, X. and Ding, M. D. and Zhang, J. and Sun, X. D. and Guo, Y. and Wang, Yi-Ming and Kliem, Bernhard and Deng, Y. Y.}, title = {Formation of a double-decker magnetic flux rope in the sigmoidal solar active region 11520}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {789}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {2}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/789/2/93}, pages = {12}, year = {2014}, abstract = {In this paper, we address the formation of a magnetic flux rope (MFR) that erupted on 2012 July 12 and caused a strong geomagnetic storm event on July 15. Through analyzing the long-term evolution of the associated active region observed by the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, it is found that the twisted field of an MFR, indicated by a continuous S-shaped sigmoid, is built up from two groups of sheared arcades near the main polarity inversion line a half day before the eruption. The temperature within the twisted field and sheared arcades is higher than that of the ambient volume, suggesting that magnetic reconnection most likely works there. The driver behind the reconnection is attributed to shearing and converging motions at magnetic footpoints with velocities in the range of 0.1-0.6 km s(-1). The rotation of the preceding sunspot also contributes to the MFR buildup. Extrapolated three-dimensional non-linear force-free field structures further reveal the locations of the reconnection to be in a bald-patch region and in a hyperbolic flux tube. About 2 hr before the eruption, indications of a second MFR in the form of an S-shaped hot channel are seen. It lies above the original MFR that continuously exists and includes a filament. The whole structure thus makes up a stable double-decker MFR system for hours prior to the eruption. Eventually, after entering the domain of instability, the high-lying MFR impulsively erupts to generate a fast coronal mass ejection and X-class flare; while the low-lying MFR remains behind and continuously maintains the sigmoidicity of the active region.}, language = {en} } @article{AlbrechtLevermann2014, author = {Albrecht, Torsten and Levermann, Anders}, title = {Fracture-induced softening for large-scale ice dynamics}, series = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union}, volume = {8}, journal = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union}, number = {2}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1994-0416}, doi = {10.5194/tc-8-587-2014}, pages = {587 -- 605}, year = {2014}, abstract = {Floating ice shelves can exert a retentive and hence stabilizing force onto the inland ice sheet of Antarctica. However, this effect has been observed to diminish by the dynamic effects of fracture processes within the protective ice shelves, leading to accelerated ice flow and hence to a sea-level contribution. In order to account for the macroscopic effect of fracture processes on large-scale viscous ice dynamics (i.e., ice-shelf scale) we apply a continuum representation of fractures and related fracture growth into the prognostic Parallel Ice Sheet Model (PISM) and compare the results to observations. To this end we introduce a higher order accuracy advection scheme for the transport of the two-dimensional fracture density across the regular computational grid. Dynamic coupling of fractures and ice flow is attained by a reduction of effective ice viscosity proportional to the inferred fracture density. This formulation implies the possibility of non-linear threshold behavior due to self-amplified fracturing in shear regions triggered by small variations in the fracture-initiation threshold. As a result of prognostic flow simulations, sharp across-flow velocity gradients appear in fracture-weakened regions. These modeled gradients compare well in magnitude and location with those in observed flow patterns. This model framework is in principle expandable to grounded ice streams and provides simple means of investigating climate-induced effects on fracturing (e. g., hydro fracturing) and hence on the ice flow. It further constitutes a physically sound basis for an enhanced fracture-based calving parameterization.}, language = {en} } @phdthesis{Goldshteyn2014, author = {Goldshteyn, Jewgenij}, title = {Frequency-resolved ultrafast dynamics of phonon polariton wavepackets in the ferroelectric crystals LiNbO₃ and LiTaO₃}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-71623}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {During this work I built a four wave mixing setup for the time-resolved femtosecond spectroscopy of Raman-active lattice modes. This setup enables to study the selective excitation of phonon polaritons. These quasi-particles arise from the coupling of electro-magnetic waves and transverse optical lattice modes, the so-called phonons. The phonon polaritons were investigated in the optically non-linear, ferroelectric crystals LiNbO₃ and LiTaO₃. The direct observation of the frequency shift of the scattered narrow bandwidth probe pulses proofs the role of the Raman interaction during the probe and excitation process of phonon polaritons. I compare this experimental method with the measurement where ultra-short laser pulses are used. The frequency shift remains obscured by the relative broad bandwidth of these laser pulses. In an experiment with narrow bandwidth probe pulses, the Stokes and anti-Stokes intensities are spectrally separated. They are assigned to the corresponding counter-propagating wavepackets of phonon polaritons. Thus, the dynamics of these wavepackets was separately studied. Based on these findings, I develop the mathematical description of the so-called homodyne detection of light for the case of light scattering from counter propagating phonon polaritons. Further, I modified the broad bandwidth of the ultra-short pump pulses using bandpass filters to generate two pump pulses with non-overlapping spectra. This enables the frequency-selective excitation of polariton modes in the sample, which allows me to observe even very weak polariton modes in LiNbO₃ or LiTaO₃ that belong to the higher branches of the dispersion relation of phonon polaritons. The experimentally determined dispersion relation of the phonon polaritons could therefore be extended and compared to theoretical models. In addition, I determined the frequency-dependent damping of phonon polaritons.}, language = {en} } @phdthesis{Sorce2014, author = {Sorce, Jenny}, title = {From Spitzer mid-infrared observations and measurements of peculiar velocities to constrained simulations of the local universe}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72486}, school = {Universit{\"a}t Potsdam}, pages = {xx, 303}, year = {2014}, abstract = {Galaxies are observational probes to study the Large Scale Structure. Their gravitational motions are tracers of the total matter density and therefore of the Large Scale Structure. Besides, studies of structure formation and galaxy evolution rely on numerical cosmological simulations. Still, only one universe observable from a given position, in time and space, is available for comparisons with simulations. The related cosmic variance affects our ability to interpret the results. Simulations constrained by observational data are a perfect remedy to this problem. Achieving such simulations requires the projects Cosmic flows and CLUES. Cosmic flows builds catalogs of accurate distance measurements to map deviations from the expansion. These measures are mainly obtained with the galaxy luminosity-rotation rate correlation. We present the calibration of that relation in the mid-infrared with observational data from Spitzer Space Telescope. Resulting accurate distance estimates will be included in the third catalog of the project. In the meantime, two catalogs up to 30 and 150 Mpc/h have been released. We report improvements and applications of the CLUES' method on these two catalogs. The technique is based on the constrained realization algorithm. The cosmic displacement field is computed with the Zel'dovich approximation. This latter is then reversed to relocate reconstructed three-dimensional constraints to their precursors' positions in the initial field. The size of the second catalog (8000 galaxies within 150 Mpc/h) highlighted the importance of minimizing the observational biases. By carrying out tests on mock catalogs, built from cosmological simulations, a method to minimize observational bias can be derived. Finally, for the first time, cosmological simulations are constrained solely by peculiar velocities. The process is successful as resulting simulations resemble the Local Universe. The major attractors and voids are simulated at positions approaching observational positions by a few megaparsecs, thus reaching the limit imposed by the linear theory.}, language = {en} } @article{RolandSchubertCollinsetal.2014, author = {Roland, Steffen and Schubert, Marcel and Collins, Brian A. and Kurpiers, Jona and Chen, Zhihua and Facchetti, Antonio and Ade, Harald W. and Neher, Dieter}, title = {Fullerene-free polymer solar cells with highly reduced bimolecular recombination and field-independent charge carrier generation}, series = {The journal of physical chemistry letters}, volume = {5}, journal = {The journal of physical chemistry letters}, number = {16}, publisher = {American Chemical Society}, address = {Washington}, issn = {1948-7185}, doi = {10.1021/jz501506z}, pages = {2815 -- 2822}, year = {2014}, abstract = {Photogeneration, recombination, and transport of free charge carriers in all-polymer bulk heterojunction solar cells incorporating poly(3-hexylthiophene) (P3HT) as donor and poly([N,N'-bis(2-octyldodecyl)-naphthelene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)) (P(NDI2OD-T2)) as acceptor polymer have been investigated by the use of time delayed collection field (TDCF) and time-of-flight (TOF) measurements. Depending on the preparation procedure used to dry the active layers, these solar cells comprise high fill factors (FFs) of up to 67\%. A strongly reduced bimolecular recombination (BMR), as well as a field-independent free charge carrier generation are observed, features that are common to high performance fullerene-based solar cells. Resonant soft X-ray measurements (R-SoXS) and photoluminescence quenching experiments (PQE) reveal that the BMR is related to domain purity. Our results elucidate the similarities of this polymeric acceptor with the superior recombination properties of fullerene acceptors.}, language = {en} } @article{BonifacioRahmaniWhitmoreetal.2014, author = {Bonifacio, P. and Rahmani, H. and Whitmore, J. B. and Wendt, Martin and Centurion, Martin and Molaro, P. and Srianand, R. and Murphy, M. T. and Petitjean, P. and Agafonova, I. I. and Evans, T. M. and Levshakov, S. A. and Lopez, S. and Martins, C. J. A. P. and Reimers, D. and Vladilo, G.}, title = {Fundamental constants and high-resolution spectroscopy}, series = {Astronomische Nachrichten = Astronomical notes}, volume = {335}, journal = {Astronomische Nachrichten = Astronomical notes}, number = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0004-6337}, doi = {10.1002/asna.201312005}, pages = {83 -- 91}, year = {2014}, language = {en} } @article{Baushev2014, author = {Baushev, Anton N.}, title = {Galaxy halo formation in the absence of violent relaxation and a universal density profile of the halo center}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {786}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {1}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/786/1/65}, pages = {8}, year = {2014}, abstract = {While N-body simulations testify to a cuspy profile of the central region of dark matter halos, observations favor a shallow, cored density profile of the central region of at least some spiral galaxies and dwarf spheroidals. We show that a central profile, very close to the observed one, inevitably forms in the center of dark matter halos if we make a supposition about a moderate energy relaxation of the system during the halo formation. If we assume the energy exchange between dark matter particles during the halo collapse is not too intensive, the profile is universal: it depends almost not at all on the properties of the initial perturbation and is very akin, but not identical, to the Einasto profile with a small Einasto index n similar to 0.5. We estimate the size of the "central core" of the distribution, i.e., the extent of the very central region with a respectively gentle profile, and show that the cusp formation is unlikely, even if the dark matter is cold. The obtained profile is in good agreement with observational data for at least some types of galaxies but clearly disagrees with N-body simulations.}, language = {en} } @phdthesis{Federici2014, author = {Federici, Simone}, title = {Gamma-ray studies of the young shell-type SNR RX J1713.7-3946}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71734}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {One of the most significant current discussions in Astrophysics relates to the origin of high-energy cosmic rays. According to our current knowledge, the abundance distribution of the elements in cosmic rays at their point of origin indicates, within plausible error limits, that they were initially formed by nuclear processes in the interiors of stars. It is also believed that their energy distribution up to 1018 eV has Galactic origins. But even though the knowledge about potential sources of cosmic rays is quite poor above „ 1015 eV, that is the "knee" of the cosmic-ray spectrum, up to the knee there seems to be a wide consensus that supernova remnants are the most likely candidates. Evidence of this comes from observations of non-thermal X-ray radiation, requiring synchrotron electrons with energies up to 1014 eV, exactly in the remnant of supernovae. To date, however, there is not conclusive evidence that they produce nuclei, the dominant component of cosmic rays, in addition to electrons. In light of this dearth of evidence, γ-ray observations from supernova remnants can offer the most promising direct way to confirm whether or not these astrophysical objects are indeed the main source of cosmic-ray nuclei below the knee. Recent observations with space- and ground-based observatories have established shell-type supernova remnants as GeV-to- TeV γ-ray sources. The interpretation of these observations is however complicated by the different radiation processes, leptonic and hadronic, that can produce similar fluxes in this energy band rendering ambiguous the nature of the emission itself. The aim of this work is to develop a deeper understanding of these radiation processes from a particular shell-type supernova remnant, namely RX J1713.7-3946, using observations of the LAT instrument onboard the Fermi Gamma-Ray Space Telescope. Furthermore, to obtain accurate spectra and morphology maps of the emission associated with this supernova remnant, an improved model of the diffuse Galactic γ-ray emission background is developed. The analyses of RX J1713.7-3946 carried out with this improved background show that the hard Fermi-LAT spectrum cannot be ascribed to the hadronic emission, leading thus to the conclusion that the leptonic scenario is instead the most natural picture for the high-energy γ-ray emission of RX J1713.7-3946. The leptonic scenario however does not rule out the possibility that cosmic-ray nuclei are accelerated in this supernova remnant, but it suggests that the ambient density may not be high enough to produce a significant hadronic γ-ray emission. Further investigations involving other supernova remnants using the improved back- ground developed in this work could allow compelling population studies, and hence prove or disprove the origin of Galactic cosmic-ray nuclei in these astrophysical objects. A break- through regarding the identification of the radiation mechanisms could be lastly achieved with a new generation of instruments such as CTA.}, language = {en} } @article{NagelGuvenThevesetal.2014, author = {Nagel, Oliver and Guven, Can and Theves, Matthias and Driscoll, Meghan and Losert, Wolfgang and Beta, Carsten}, title = {Geometry-driven polarity in motile amoeboid cells}, series = {PLoS one}, volume = {9}, journal = {PLoS one}, number = {12}, publisher = {PLoS}, address = {San Fransisco}, issn = {1932-6203}, doi = {10.1371/journal.pone.0113382}, pages = {20}, year = {2014}, abstract = {Motile eukaryotic cells, such as leukocytes, cancer cells, and amoeba, typically move inside the narrow interstitial spacings of tissue or soil. While most of our knowledge of actin-driven eukaryotic motility was obtained from cells that move on planar open surfaces, recent work has demonstrated that confinement can lead to strongly altered motile behavior. Here, we report experimental evidence that motile amoeboid cells undergo a spontaneous symmetry breaking in confined interstitial spaces. Inside narrow channels, the cells switch to a highly persistent, unidirectional mode of motion, moving at a constant speed along the channel. They remain in contact with the two opposing channel side walls and alternate protrusions of their leading edge near each wall. Their actin cytoskeleton exhibits a characteristic arrangement that is dominated by dense, stationary actin foci at the side walls, in conjunction with less dense dynamic regions at the leading edge. Our experimental findings can be explained based on an excitable network model that accounts for the confinement-induced symmetry breaking and correctly recovers the spatio-temporal pattern of protrusions at the leading edge. Since motile cells typically live in the narrow interstitial spacings of tissue or soil, we expect that the geometry-driven polarity we report here plays an important role for movement of cells in their natural environment.}, language = {en} } @article{DiFlorioBruendermannYadavallietal.2014, author = {Di Florio, G. and Bruendermann, E. and Yadavalli, Nataraja Sekhar and Santer, Svetlana and Havenith, Martina}, title = {Graphene multilayer as nanosized optical strain gauge for polymer surface relief gratings}, series = {Nano letters : a journal dedicated to nanoscience and nanotechnology}, volume = {14}, journal = {Nano letters : a journal dedicated to nanoscience and nanotechnology}, number = {10}, publisher = {American Chemical Society}, address = {Washington}, issn = {1530-6984}, doi = {10.1021/nl502631s}, pages = {5754 -- 5760}, year = {2014}, abstract = {In this paper, we show how graphene can be utilized as a nanoscopic probe in order to characterize local opto-mechanical forces generated within photosensitive azobenzene containing polymer films. Upon irradiation with light interference patterns, photosensitive films deform according to the spatial intensity variation, leading to the formation of periodic topographies such as surface relief gratings (SRG). The mechanical driving forces inscribing a pattern into the films are supposedly fairly large, because the deformation takes place without photofluidization; the polymer is in a glassy state throughout. However, until now there has been no attempt to characterize these forces by any means. The challenge here is that the forces vary locally on a nanometer scale. Here, we propose to use Raman analysis of the stretching of the graphene layer adsorbed on top of polymer film under deformation in order to probe the strength of the material transport spatially resolved. With the well-known mechanical properties of graphene, we can obtain lower bounds on the forces acting within the film. Upon the basis of our experimental results, we can deduce that the internal pressure in the film due to grating formation can exceed 1 GPa. The graphene-based nanoscopic gauge opens new possibilities to characterize opto-mechanical forces generated within photosensitive polymer films.}, language = {en} }