@article{AgadaChenGeigeretal.2014, author = {Agada, S. and Chen, F. and Geiger, S. and Toigulova, G. and Agar, Susan M. and Shekhar, R. and Benson, Gregory S. and Hehmeyer, O. and Amour, Fr{\´e}d{\´e}ric and Mutti, Maria and Christ, Nicolas and Immenhauser, A.}, title = {Numerical simulation of fluid-flow processes in a 3D high-resolution carbonate reservoir analogue}, series = {Petroleum geoscience}, volume = {20}, journal = {Petroleum geoscience}, number = {1}, publisher = {Geological Soc. Publ. House}, address = {Bath}, issn = {1354-0793}, doi = {10.1144/petgeo2012-096}, pages = {125 -- 142}, year = {2014}, abstract = {A high-resolution three-dimensional (3D) outcrop model of a Jurassic carbonate ramp was used in order to perform a series of detailed and systematic flow simulations. The aim of this study was to test the impact of small- and large-scale geological features on reservoir performance and oil recovery. The digital outcrop model contains a wide range of sedimentological, diagenetic and structural features, including discontinuity surfaces, shoal bodies, mud mounds, oyster bioherms and fractures. Flow simulations are performed for numerical well testing and secondary oil recovery. Numerical well testing enables synthetic but systematic pressure responses to be generated for different geological features observed in the outcrops. This allows us to assess and rank the relative impact of specific geological features on reservoir performance. The outcome documents that, owing to the realistic representation of matrix heterogeneity, most diagenetic and structural features cannot be linked to a unique pressure signature. Instead, reservoir performance is controlled by subseismic faults and oyster bioherms acting as thief zones. Numerical simulations of secondary recovery processes reveal strong channelling of fluid flow into high-permeability layers as the primary control for oil recovery. However, appropriate reservoir-engineering solutions, such as optimizing well placement and injection fluid, can reduce channelling and increase oil recovery.}, language = {en} } @article{AichLierschVetteretal.2014, author = {Aich, Valentin and Liersch, Stefan and Vetter, T. and Huang, S. and Tecklenburg, J. and Hoffmann, P. and Koch, H. and Fournet, S. and Krysanova, Valentina and Mueller, N. and Hattermann, Fred}, title = {Comparing impacts of climate change on streamflow in four large African river basins}, series = {Hydrology and earth system sciences : HESS}, volume = {18}, journal = {Hydrology and earth system sciences : HESS}, number = {4}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1027-5606}, doi = {10.5194/hess-18-1305-2014}, pages = {1305 -- 1321}, year = {2014}, abstract = {This study aims to compare impacts of climate change on streamflow in four large representative African river basins: the Niger, the Upper Blue Nile, the Oubangui and the Limpopo. We set up the eco-hydrological model SWIM (Soil and Water Integrated Model) for all four basins individually. The validation of the models for four basins shows results from adequate to very good, depending on the quality and availability of input and calibration data. For the climate impact assessment, we drive the model with outputs of five bias corrected Earth system models of Coupled Model Intercomparison Project Phase 5 (CMIP5) for the representative concentration pathways (RCPs) 2.6 and 8.5. This climate input is put into the context of climate trends of the whole African continent and compared to a CMIP5 ensemble of 19 models in order to test their representativeness. Subsequently, we compare the trends in mean discharges, seasonality and hydrological extremes in the 21st century. The uncertainty of results for all basins is high. Still, climate change impact is clearly visible for mean discharges but also for extremes in high and low flows. The uncertainty of the projections is the lowest in the Upper Blue Nile, where an increase in streamflow is most likely. In the Niger and the Limpopo basins, the magnitude of trends in both directions is high and has a wide range of uncertainty. In the Oubangui, impacts are the least significant. Our results confirm partly the findings of previous continental impact analyses for Africa. However, contradictory to these studies we find a tendency for increased streamflows in three of the four basins (not for the Oubangui). Guided by these results, we argue for attention to the possible risks of increasing high flows in the face of the dominant water scarcity in Africa. In conclusion, the study shows that impact intercomparisons have added value to the adaptation discussion and may be used for setting up adaptation plans in the context of a holistic approach.}, language = {en} } @article{AichZimmermannElsenbeer2014, author = {Aich, Valentin and Zimmermann, Alexander and Elsenbeer, Helmut}, title = {Quantification and interpretation of suspended-sediment discharge hysteresis patterns: How much data do we need?}, series = {Catena : an interdisciplinary journal of soil science, hydrology, geomorphology focusing on geoecology and landscape evolution}, volume = {122}, journal = {Catena : an interdisciplinary journal of soil science, hydrology, geomorphology focusing on geoecology and landscape evolution}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0341-8162}, doi = {10.1016/j.catena.2014.06.020}, pages = {120 -- 129}, year = {2014}, abstract = {Sediment-discharge hysteresis loops are frequently analyzed to facilitate the understanding of sediment transport processes. Hysteresis patterns, however, are often complex and their interpretation can be complicated. Particularly, quantifying hysteresis patterns remains a problematic issue. Moreover, it is currently unknown how much data is required for analyzing sediment-discharge hysteresis loops in a given area. These open questions and challenges motivated us to develop a new method for quantifying suspended-sediment hysteresis. Subsequently, we applied the new hysteresis index to three suspended-sediment and discharge datasets from a small tropical rainforest catchment. The datasets comprised a different number of events and sampling sites. Our analyses show three main findings: (1) datasets restricted to only few events, which is typical for rapid assessment surveys, were always sufficient to identify the dominating hysteresis pattern in our research area. Furthermore, some of these small datasets contained multiple-peak events that allowed identifying intra-event exhaustion effects and hence, limitations in sediment supply. (2) Datasets comprising complete hydrological years were particularly useful for analyzing seasonal dynamics of hysteresis. These analyses revealed an exhaustion of hysteresis on the inter-event scale which also points to a limited sediment supply. (3) Datasets comprising measurements from two consecutive gauges installed at the catchment outlet and on a slope within that catchment allowed analyzing the change of hysteresis patterns along the flowpath. On the slope, multiple-peak events showed a stronger intra-event exhaustion of hysteresis than at the catchment outlet. Furthermore, exhaustion of hysteresis on the inter-event scale was not evident on the slope but occurred at the catchment outlet. Our results indicate that even small sediment datasets can provide valuable insights into sediment transport processes of small catchments. Furthermore, our results may serve as a first guideline on what to expect from an analysis of hysteresis patterns for datasets of varying quality and quantity. (c) 2014 Elsevier B.V. All rights reserved.}, language = {en} } @article{AlawiSchneiderKallmeyer2014, author = {Alawi, Mashal and Schneider, Beate and Kallmeyer, Jens}, title = {A procedure for separate recovery of extra- and intracellular DNA from a single marine sediment sample}, series = {Journal of microbiological methods}, volume = {104}, journal = {Journal of microbiological methods}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0167-7012}, doi = {10.1016/j.mimet.2014.06.009}, pages = {36 -- 42}, year = {2014}, abstract = {Extracellular DNA (eDNA) is a ubiquitous biological compound in aquatic sediment and soil. Previous studies suggested that eDNA plays an important role in biogeochemical element cycling, horizontal gene transfer and stabilization of biofilm structures. Previous methods for eDNA extraction were either not suitable for oligotrophic sediments or only allowed quantification but no genetic analyses. Our procedure is based on cell detachment and eDNA liberation from sediment particles by sequential washing with an alkaline sodium phosphate buffer followed by a separation of cells and eDNA. The separated eDNA is then bound onto silica particles and purified, whereas the intracellular DNA from the separated cells is extracted using a commercial kit. The method provides extra- and intracellular DNA of high purity that is suitable for downstream applications like PCR. Extracellular DNA was extracted from organic-rich shallow sediment of the Baltic Sea, glacially influenced sediment of the Barents Sea and from the oligotrophic South Pacific Gyre. The eDNA concentration in these samples varied from 23 to 626 ng g(-1) wet weight sediment. A number of experiments were performed to verify each processing step. Although extraction efficiency is higher than other published methods, it is not fully quantitative. (C) 2014 Elsevier B.V. All rights reserved.}, language = {en} } @article{AlbrichFrijiaParenteetal.2014, author = {Albrich, Sergi and Frijia, Gianluca and Parente, Mariano and Caus, Esmeralda}, title = {The evolution of the earliest representatives of the genus Orbitoides: Implications for Upper Cretaceous biostratigraphy}, series = {Cretaceous research}, volume = {51}, journal = {Cretaceous research}, publisher = {Elsevier}, address = {London}, issn = {0195-6671}, doi = {10.1016/j.cretres.2014.04.013}, pages = {22 -- 34}, year = {2014}, abstract = {The biostratigraphy of Campanian-Maastrichtian carbonate platforms is largely based on the larger foraminiferal genus Orbitoides. However, while the taxonomy and the chronostratigraphic age of the younger species of this genus are well established, there are still many controversies on the earliest species. We have restudied their morphological characters using a large collection of samples from the type-localities and from continuous sections in the southern Pyrenees. Based on these new observations, the long forgotten species O. sanctae-pelagiae is reinstated, while O. dordoniensis is considered a junior synonym. Successive populations of O. hottingeri, O. sanctae-pelagiae and O. douvillei show gradual morphological changes in time marked by an increase in the size and complexity of the macrospheric embryonal apparatus, an increase of the size of the adult specimens of both generations and the progressive appearance and development of true lateral chamberlets. The Font de les Bagasses Unit in the southern Pyrenees preserves a high-resolution archive of the evolution of the earliest Orbitoides. Strontium isotope stratigraphy indicates that the oldest species, O. hottingeri, made its first appearance in the earliest Campanian, close to the Santonian-Campanian boundary, and was replaced by O. sanctae-pelagiae at a level closely corresponding to the boundary between the Placenticeras bidorsatum and Menabites delawarensis ammonite zones. (C) 2014 Elsevier Ltd. All rights reserved.}, language = {en} } @article{AlinaghiKruger2014, author = {Alinaghi, Alireza and Kruger, Frank}, title = {Seismic array analysis and redetermination of depths of earthquakes in Tien-Shan: implications for strength of the crust and lithosphere}, series = {Geophysical journal international}, volume = {198}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggu141}, pages = {1111 -- 1129}, year = {2014}, abstract = {We have redetermined focal depths of moderate and major earthquakes with reported lower-crust and upper-mantle depths that have occurred in Tien-Shan, since the availability of broad-band array data. Records of earthquakes at global arrays have been used for identification and modelling of depth phases in order to make accurate estimation of focal depths. Our results show that half of the purportedly deep earthquakes are indeed originating from depths attributable to middle-crust and lower-crust regions. Also one exceptional event in the northern foreland of Tien-Shan in Junggar Basin is located in the upper mantle at the depth of 64 km. Such unusually deep earthquakes for intraplate continental tectonic domain are all located at the margin of Tien-Shan with its adjacent stable blocks and at least some of them have occurred where the brittle behaviour of continental rocks is not highly expected. The reverse mechanisms of all these earthquakes and their proximity to formerly subducting and later colliding and underplating stable blocks and their interactions with overlying Tien-Shan are clues to explain this extremity.}, language = {en} } @article{BallatoStrecker2014, author = {Ballato, Paolo and Strecker, Manfred}, title = {Assessing tectonic and climatic causal mechanisms in foreland-basin stratal architecture: insights from the Alborz Mountains, northern Iran}, series = {Earth surface processes and landforms : the journal of the British Geomorphological Research Group}, volume = {39}, journal = {Earth surface processes and landforms : the journal of the British Geomorphological Research Group}, number = {1}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0197-9337}, doi = {10.1002/esp.3480}, pages = {110 -- 125}, year = {2014}, abstract = {The southern foreland basin of the Alborz Mountains of northern Iran is characterized by an approximately 7.3-km-thick sequence of Miocene sedimentary rocks, constituting three basin-wde coarsening-upward units spanning a period of 10(6)years. We assess available magnetostratigraphy, paleoclimatic reconstructions, stratal architecture, records of depositional environments, and sediment-provenance data to characterize the relationships between tectonically-generated accommodation space (A) and sediment supply (S). Our analysis allows an inversion of the stratigraphy for particular forcing mechanisms, documenting causal relationships, and providing a basis to decipher the relative contributions of tectonics and climate (inferred changes in precipitation) in controlling sediment supply to the foreland basin. Specifically, A/S>1, typical of each basal unit (17.5-16.0, 13.8-13.1 and 10.3-9.6Ma), is associated with sharp facies retrogradation and reflects substantial tectonic subsidence. Within these time intervals, arid climatic conditions, changes in sediment provenance, and accelerated exhumation in the orogen suggest that sediment supply was most likely driven by high uplift rates. Conversely, A/S<1 (13.8 and 13.8-11Ma, units 1, and 2) reflects facies progradation during a sharp decline in tectonic subsidence caused by localized intra-basinal uplift. During these time intervals, climate continued to be arid and exhumation active, suggesting that sediment supply was again controlled by tectonics. A/S<1, at 11-10.3Ma and 9-6-7.6Ma (and possibly 6.2; top of units 2 and 3), is also associated with two episodes of extensive progradation, but during wetter phases. The first episode appears to have been linked to a pulse in sediment supply driven by an increase in precipitation. The second episode reflects a balance between a climatically-induced increase in sediment supply and a reduction of subsidence through the incorporation of the proximal foreland into the orogenic wedge. This in turn caused an expansion of the catchment and a consequent further increase in sediment supply.}, language = {en} } @article{BaroniTarantola2014, author = {Baroni, Gabriele and Tarantola, S.}, title = {A general probabilistic framework for uncertainty and global sensitivity analysis of deterministic models: A hydrological case study}, series = {Environmental modelling \& software with environment data news}, volume = {51}, journal = {Environmental modelling \& software with environment data news}, publisher = {Elsevier}, address = {Oxford}, issn = {1364-8152}, doi = {10.1016/j.envsoft.2013.09.022}, pages = {26 -- 34}, year = {2014}, abstract = {The present study proposes a General Probabilistic Framework (GPF) for uncertainty and global sensitivity analysis of deterministic models in which, in addition to scalar inputs, non-scalar and correlated inputs can be considered as well. The analysis is conducted with the variance-based approach of Sobol/Saltelli where first and total sensitivity indices are estimated. The results of the framework can be used in a loop for model improvement, parameter estimation or model simplification. The framework is applied to SWAP, a 113 hydrological model for the transport of water, solutes and heat in unsaturated and saturated soils. The sources of uncertainty are grouped in five main classes: model structure (soil discretization), input (weather data), time-varying (crop) parameters, scalar parameters (soil properties) and observations (measured soil moisture). For each source of uncertainty, different realizations are created based on direct monitoring activities. Uncertainty of evapotranspiration, soil moisture in the root zone and bottom fluxes below the root zone are considered in the analysis. The results show that the sources of uncertainty are different for each output considered and it is necessary to consider multiple output variables for a proper assessment of the model. Improvements on the performance of the model can be achieved reducing the uncertainty in the observations, in the soil parameters and in the weather data. Overall, the study shows the capability of the GPF to quantify the relative contribution of the different sources of uncertainty and to identify the priorities required to improve the performance of the model. The proposed framework can be extended to a wide variety of modelling applications, also when direct measurements of model output are not available.}, language = {en} } @article{BasavaiahWiesnerAnoopetal.2014, author = {Basavaiah, Nathani and Wiesner, M. G. and Anoop, Ambili and Menzel, P. and Nowaczyk, Norbert R. and Deenadayalan, K. and Brauer, Achim and Gaye, Birgit and Naumann, R. and Riedel, N. and Stebich, M. and Prasad, Sushma}, title = {Physicochemical analyses of surface sediments from the Lonar Lake, central India - implications for palaeoenvironmental reconstruction}, series = {Fundamental and applied limnology : official journal of the International Association of Theoretical and Applied Limnology}, volume = {184}, journal = {Fundamental and applied limnology : official journal of the International Association of Theoretical and Applied Limnology}, number = {1}, publisher = {Schweizerbart}, address = {Stuttgart}, issn = {1863-9135}, doi = {10.1127/1863-9135/2014/0515}, pages = {51 -- 68}, year = {2014}, abstract = {We report the results of our investigations on the catchment area, surface sediments, and hydrology of the monsoonal Lonar Lake, central India. Our results indicate that the lake is currently stratified with an anoxic bottom layer, and there is a spatial heterogeneity in the sensitivity of sediment parameters to different environmental processes. In the shallow (0-5 m) near shore oxic-suboxic environments the lithogenic and terrestrial organic content is high and spatially variable, and the organics show degradation in the oxic part. Due to aerial exposure resulting from lake level changes of at least 3m, the evaporitic carbonates are not completely preserved. In the deep water (>5 m) anoxic environment the lithogenics are uniformly distributed and the delta C-13 is an indicator not only for aquatic vs. terrestrial plants but also of lake pH and salinity. The isotopic composition of the evaporites is dependent not only on the isotopic composition of source water (monsoon rainfall and stream inflow) and evaporation, but is also influenced by proximity to the isotopically depleted stream inflow. We conclude that in the deep water environment lithogenic content, and isotopic composition of organic matter can be used for palaeoenvironmental reconstruction.}, language = {en} } @phdthesis{Bathke2014, author = {Bathke, Hannes}, title = {An investigation of complex deformation patterns detected by using InSAR at Llaima and Tend{\"u}rek volcanoes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70522}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {Surface displacement at volcanic edifices is related to subsurface processes associated with magma movements, fluid transfers within the volcano edifice and gravity-driven deformation processes. Understanding of associated ground displacements is of importance for assessment of volcanic hazards. For example, volcanic unrest is often preceded by surface uplift, caused by magma intrusion and followed by subsidence, after the withdrawal of magma. Continuous monitoring of the surface displacement at volcanoes therefore might allow the forecasting of upcoming eruptions to some extent. In geophysics, the measured surface displacements allow the parameters of possible deformation sources to be estimated through analytical or numerical modeling. This is one way to improve the understanding of subsurface processes acting at volcanoes. Although the monitoring of volcanoes has significantly improved in the last decades (in terms of technical advancements and number of monitored volcanoes), the forecasting of volcanic eruptions remains puzzling. In this work I contribute towards the understanding of the subsurface processes at volcanoes and thus to the improvement of volcano eruption forecasting. I have investigated the displacement field of Llaima volcano in Chile and of Tend{\"u}rek volcano in East Turkey by using synthetic aperture radar interferometry (InSAR). Through modeling of the deformation sources with the extracted displacement data, it was possible to gain insights into potential subsurface processes occurring at these two volcanoes that had been barely studied before. The two volcanoes, although of very different origin, composition and geometry, both show a complexity of interacting deformation sources. At Llaima volcano, the InSAR technique was difficult to apply, due to the large decorrelation of the radar signal between the acquisition of images. I developed a model-based unwrapping scheme, which allows the production of reliable displacement maps at the volcano that I used for deformation source modeling. The modeling results show significant differences in pre- and post-eruptive magmatic deformation source parameters. Therefore, I conjecture that two magma chambers exist below Llaima volcano: a post-eruptive deep one and a shallow one possibly due to the pre-eruptive ascent of magma. Similar reservoir depths at Llaima have been confirmed by independent petrologic studies. These reservoirs are interpreted to be temporally coupled. At Tend{\"u}rek volcano I have found long-term subsidence of the volcanic edifice, which can be described by a large, magmatic, sill-like source that is subject to cooling contraction. The displacement data in conjunction with high-resolution optical images, however, reveal arcuate fractures at the eastern and western flank of the volcano. These are most likely the surface expressions of concentric ring-faults around the volcanic edifice that show low magnitudes of slip over a long time. This might be an alternative mechanism for the development of large caldera structures, which are so far assumed to be generated during large catastrophic collapse events. To investigate the potential subsurface geometry and relation of the two proposed interacting sources at Tend{\"u}rek, a sill-like magmatic source and ring-faults, I have performed a more sophisticated numerical modeling approach. The optimum source geometries show, that the size of the sill-like source was overestimated in the simple models and that it is difficult to determine the dip angle of the ring-faults with surface displacement data only. However, considering physical and geological criteria a combination of outward-dipping reverse faults in the west and inward-dipping normal faults in the east seem to be the most likely. Consequently, the underground structure at the Tend{\"u}rek volcano consists of a small, sill-like, contracting, magmatic source below the western summit crater that causes a trapdoor-like faulting along the ring-faults around the volcanic edifice. Therefore, the magmatic source and the ring-faults are also interpreted to be temporally coupled. In addition, a method for data reduction has been improved. The modeling of subsurface deformation sources requires only a relatively small number of well distributed InSAR observations at the earth's surface. Satellite radar images, however, consist of several millions of these observations. Therefore, the large amount of data needs to be reduced by several orders of magnitude for source modeling, to save computation time and increase model flexibility. I have introduced a model-based subsampling approach in particular for heterogeneously-distributed observations. It allows a fast calculation of the data error variance-covariance matrix, also supports the modeling of time dependent displacement data and is, therefore, an alternative to existing methods.}, language = {en} }