@phdthesis{Antonoglou2024,
  author    = {Antonoglou, Nikolaos},
  title     = {GNSS-based remote sensing: Innovative observation of key hydrological parameters in the Central Andes},
  doi       = {10.25932/publishup-62825},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-628256},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxii, 116},
  year      = {2024},
  abstract  = {The Central Andean region is characterized by diverse climate zones with sharp transitions between them. In this work, the area of interest is the South-Central Andes in northwestern Argentina that borders with Bolivia and Chile. The focus is the observation of soil moisture and water vapour with Global Navigation Satellite System (GNSS) remote-sensing methodologies. Because of the rapid temporal and spatial variations of water vapour and moisture circulations, monitoring this part of the hydrological cycle is crucial for understanding the mechanisms that control the local climate. Moreover, GNSS-based techniques have previously shown high potential and are appropriate for further investigation. This study includes both logistic-organization effort and data analysis. As for the prior, three GNSS ground stations were installed in remote locations in northwestern Argentina to acquire observations, where there was no availability of third-party data. The methodological development for the observation of the climate variables of soil moisture and water vapour is independent and relies on different approaches. The soil-moisture estimation with GNSS reflectometry is an approximation that has demonstrated promising results, but it has yet to be operationally employed. Thus, a more advanced algorithm that exploits more observations from multiple satellite constellations was developed using data from two pilot stations in Germany. Additionally, this algorithm was slightly modified and used in a sea-level measurement campaign. Although the objective of this application is not related to monitoring hydrological parameters, its methodology is based on the same principles and helps to evaluate the core algorithm. On the other hand, water-vapour monitoring with GNSS observations is a well-established technique that is utilized operationally. Hence, the scope of this study is conducting a meteorological analysis by examining the along-the-zenith air-moisture levels and introducing indices related to the azimuthal gradient. The results of the experiments indicate higher-quality soil moisture observations with the new algorithm. Furthermore, the analysis using the stations in northwestern Argentina illustrates the limits of this technology because of varying soil conditions and shows future research directions. The water-vapour analysis points out the strong influence of the topography on atmospheric moisture circulation and rainfall generation. Moreover, the GNSS time series allows for the identification of seasonal signatures, and the azimuthal-gradient indices permit the detection of main circulation pathways.},
  language  = {en}
}
@phdthesis{Barbosa2020,
  author    = {Barbosa, Lu{\´i}s Romero},
  title     = {Groundwater recharge in tropical wet regions via GIS-based and cosmic-ray neutron sensing},
  doi       = {10.25932/publishup-46064},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-460641},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XXVI, 175},
  year      = {2020},
  abstract  = {Studies on the unsustainable use of groundwater resources are still considered incipient since it is frequently a poorly understood and managed, devalued and inadequately protected natural resource. Groundwater Recharge (GWR) is one of the most challenging elements to estimate since it can rarely be measured directly and cannot easily be derived from existing data. To overcome these limitations, many hydro(geo)logists have combined different approaches to estimate large-scale GWR, namely: remote sensing products, such as IMERG product; Water Budget Equation, also in combination with hydrological models, and; Geographic Information System (GIS), using estimation formulas. For intermediary-scale GWR estimation, there exist: Non-invasive Cosmic-Ray Neutron Sensing (CRNS); wireless networks from local soil probes; and soil hydrological models, such as HYDRUS. Accordingly, this PhD thesis aims, on the one hand, to demonstrate a GIS-based model coupling for estimating the GWR distribution on a large scale in tropical wet basins. On the other hand, it aims to use the time series from CRNS and invasive soil moisture probes to inversely calibrate the soil hydraulic properties, and based on this, estimating the intermediary-scale GWR using a soil hydrological model. For such purpose, two tropical wet basins located in a complex sedimentary aquifer in the coastal Northeast region of Brazil were selected. These are the Jo{\~a}o Pessoa Case Study Area and the Guara{\´i}ra Experimental Basin. Several satellite products in the first area were used as input to the GIS-based water budget equation model for estimating the water balance components and GWR in 2016 and 2017. In addition, the point-scale measurement and CRNS data were used in the second area to determine the soil hydraulic properties, and to estimate the GWR in the 2017-2018 and 2018-2019 hydrological years. The resulting values of GWR on large- and intermediary-scale were then compared and validated by the estimates obtained by groundwater table fluctuations. The GWR rates for IMERG- and rain-gauge-based scenarios showed similar coefficients between 68\% and 89\%, similar mean errors between 30\% and 34\%, and slightly-different bias between -13\% and 11\%. The results of GWR rates for soil probes and CRNS soil moisture scenarios ranged from -5.87 to -61.81 cm yr-1, which corresponds to 5\% and 38\% of the precipitation. The calculations of the mean GWR rates on large-scale, based on remote sensing data, and on intermediary-scale, based on CRNS data, held similar results for the Podzol soil type, namely 17.87\% and 17\% of the precipitation. It is then concluded that the proposed methodologies allowed for estimating realistically the GWR over the study areas, which can be a ground-breaking step towards improving the water management and decision-making in the Northeast of Brazil.},
  language  = {en}
}
@misc{BriegerHerzschuhPestryakovaetal.2019,
  author    = {Brieger, Frederic and Herzschuh, Ulrike and Pestryakova, Luidmila Agafyevna and Bookhagen, Bodo and Zakharov, Evgenii S. and Kruse, Stefan},
  title     = {Advances in the derivation of Northeast Siberian forest metrics using high-resolution UAV-based photogrammetric point clouds},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1337},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-47331},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473318},
  pages     = {24},
  year      = {2019},
  abstract  = {Forest structure is a crucial component in the assessment of whether a forest is likely to act as a carbon sink under changing climate. Detailed 3D structural information about the tundra-taiga ecotone of Siberia is mostly missing and still underrepresented in current research due to the remoteness and restricted accessibility. Field based, high-resolution remote sensing can provide important knowledge for the understanding of vegetation properties and dynamics. In this study, we test the applicability of consumer-grade Unmanned Aerial Vehicles (UAVs) for rapid calculation of stand metrics in treeline forests. We reconstructed high-resolution photogrammetric point clouds and derived canopy height models for 10 study sites from NE Chukotka and SW Yakutia. Subsequently, we detected individual tree tops using a variable-window size local maximum filter and applied a marker-controlled watershed segmentation for the delineation of tree crowns. With this, we successfully detected 67.1\% of the validation individuals. Simple linear regressions of observed and detected metrics show a better correlation (R2) and lower relative root mean square percentage error (RMSE\%) for tree heights (mean R2 = 0.77, mean RMSE\% = 18.46\%) than for crown diameters (mean R2 = 0.46, mean RMSE\% = 24.9\%). The comparison between detected and observed tree height distributions revealed that our tree detection method was unable to representatively identify trees <2 m. Our results show that plot sizes for vegetation surveys in the tundra-taiga ecotone should be adapted to the forest structure and have a radius of >15-20 m to capture homogeneous and representative forest stands. Additionally, we identify sources of omission and commission errors and give recommendations for their mitigation. In summary, the efficiency of the used method depends on the complexity of the forest's stand structure.},
  language  = {en}
}
@phdthesis{Buchhorn2013,
  author    = {Buchhorn, Marcel},
  title     = {Ground-based hyperspectral and spectro-directional reflectance characterization of Arctic tundra vegetation communities : field spectroscopy and field spectro-goniometry of Siberian and Alaskan tundra in preparation of the EnMAP satellite mission},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70189},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {The Arctic tundra, covering approx. 5.5 \% of the Earth's land surface, is one of the last ecosystems remaining closest to its untouched condition. Remote sensing is able to provide information at regular time intervals and large spatial scales on the structure and function of Arctic ecosystems. But almost all natural surfaces reveal individual anisotropic reflectance behaviors, which can be described by the bidirectional reflectance distribution function (BRDF). This effect can cause significant changes in the measured surface reflectance depending on solar illumination and sensor viewing geometries. The aim of this thesis is the hyperspectral and spectro-directional reflectance characterization of important Arctic tundra vegetation communities at representative Siberian and Alaskan tundra sites as basis for the extraction of vegetation parameters, and the normalization of BRDF effects in off-nadir and multi-temporal remote sensing data. Moreover, in preparation for the upcoming German EnMAP (Environmental Mapping and Analysis Program) satellite mission, the understanding of BRDF effects in Arctic tundra is essential for the retrieval of high quality, consistent and therefore comparable datasets. The research in this doctoral thesis is based on field spectroscopic and field spectro-goniometric investigations of representative Siberian and Alaskan measurement grids. The first objective of this thesis was the development of a lightweight, transportable, and easily managed field spectro-goniometer system which nevertheless provides reliable spectro-directional data. I developed the Manual Transportable Instrument platform for ground-based Spectro-directional observations (ManTIS). The outcome of the field spectro-radiometrical measurements at the Low Arctic study sites along important environmental gradients (regional climate, soil pH, toposequence, and soil moisture) show that the different plant communities can be distinguished by their nadir-view reflectance spectra. The results especially reveal separation possibilities between the different tundra vegetation communities in the visible (VIS) blue and red wavelength regions. Additionally, the near-infrared (NIR) shoulder and NIR reflectance plateau, despite their relatively low values due to the low structure of tundra vegetation, are still valuable information sources and can separate communities according to their biomass and vegetation structure. In general, all different tundra plant communities show: (i) low maximum NIR reflectance; (ii) a weakly or nonexistent visible green reflectance peak in the VIS spectrum; (iii) a narrow "red-edge" region between the red and NIR wavelength regions; and (iv) no distinct NIR reflectance plateau. These common nadir-view reflectance characteristics are essential for the understanding of the variability of BRDF effects in Arctic tundra. None of the analyzed tundra communities showed an even closely isotropic reflectance behavior. In general, tundra vegetation communities: (i) usually show the highest BRDF effects in the solar principal plane; (ii) usually show the reflectance maximum in the backward viewing directions, and the reflectance minimum in the nadir to forward viewing directions; (iii) usually have a higher degree of reflectance anisotropy in the VIS wavelength region than in the NIR wavelength region; and (iv) show a more bowl-shaped reflectance distribution in longer wavelength bands (>700 nm). The results of the analysis of the influence of high sun zenith angles on the reflectance anisotropy show that with increasing sun zenith angles, the reflectance anisotropy changes to azimuthally symmetrical, bowl-shaped reflectance distributions with the lowest reflectance values in the nadir view position. The spectro-directional analyses also show that remote sensing products such as the NDVI or relative absorption depth products are strongly influenced by BRDF effects, and that the anisotropic characteristics of the remote sensing products can significantly differ from the observed BRDF effects in the original reflectance data. But the results further show that the NDVI can minimize view angle effects relative to the contrary spectro-directional effects in the red and NIR bands. For the researched tundra plant communities, the overall difference of the off-nadir NDVI values compared to the nadir value increases with increasing sensor viewing angles, but on average never exceeds 10 \%. In conclusion, this study shows that changes in the illumination-target-viewing geometry directly lead to an altering of the reflectance spectra of Arctic tundra communities according to their object-specific BRDFs. Since the different tundra communities show only small, but nonetheless significant differences in the surface reflectance, it is important to include spectro-directional reflectance characteristics in the algorithm development for remote sensing products.},
  language  = {en}
}
@phdthesis{Boesche2015,
  author    = {B{\"o}sche, Nina Kristine},
  title     = {Detection of rare earth elements and rare earth oxides with hyperspectral spectroscopy},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85363},
  school      = {Universit{\"a}t Potsdam},
  pages     = {147},
  year      = {2015},
  abstract  = {The continuously increasing demand for rare earth elements in technical components of modern technologies, brings the detection of new deposits closer into the focus of global exploration. One promising method to globally map important deposits might be remote sensing, since it has been used for a wide range of mineral mapping in the past. This doctoral thesis investigates the capacity of hyperspectral remote sensing for the detection of rare earth element deposits. The definition and the realization of a fundamental database on the spectral characteristics of rare earth oxides, rare earth metals and rare earth element bearing materials formed the basis of this thesis. To investigate these characteristics in the field, hyperspectral images of four outcrops in Fen Complex, Norway, were collected in the near-field. A new methodology (named REEMAP) was developed to delineate rare earth element enriched zones. The main steps of REEMAP are: 1) multitemporal weighted averaging of multiple images covering the sample area; 2) sharpening the rare earth related signals using a Gaussian high pass deconvolution technique that is calibrated on the standard deviation of a Gaussian-bell shaped curve that represents by the full width of half maxima of the target absorption band; 3) mathematical modeling of the target absorption band and highlighting of rare earth elements. REEMAP was further adapted to different hyperspectral sensors (EO-1 Hyperion and EnMAP) and a new test site (Lofdal, Namibia). Additionally, the hyperspectral signatures of associated minerals were investigated to serve as proxy for the host rocks. Finally, the capacity and limitations of spectroscopic rare earth element detection approaches in general and of the REEMAP approach specifically were investigated and discussed. One result of this doctoral thesis is that eight rare earth oxides show robust absorption bands and, therefore, can be used for hyperspectral detection methods. Additionally, the spectral signatures of iron oxides, iron-bearing sulfates, calcite and kaolinite can be used to detect metasomatic alteration zones and highlight the ore zone. One of the key results of this doctoral work is the developed REEMAP approach, which can be applied from near-field to space. The REEMAP approach enables rare earth element mapping especially for noisy images. Limiting factors are a low signal to noise ratio, a reduced spectral resolution, overlaying materials, atmospheric absorption residuals and non-optimal illumination conditions. Another key result of this doctoral thesis is the finding that the future hyperspectral EnMAP satellite (with its currently published specifications, June 2015) will be theoretically capable to detect absorption bands of erbium, dysprosium, holmium, neodymium and europium, thulium and samarium. This thesis presents a new methodology REEMAP that enables a spatially wide and rapid hyperspectral detection of rare earth elements in order to meet the demand for fast, extensive and efficient rare earth exploration (from near-field to space).},
  language  = {en}
}
@misc{BoescheRogassLubitzetal.2017,
  author    = {B{\"o}sche, Nina Kristine and Rogass, Christian and Lubitz, Christin and Brell, Maximilian and Herrmann, Sabrina and Mielke, Christian and Tonn, Sabine and Appelt, Oona and Altenberger, Uwe and Kaufmann, Hermann},
  title     = {Hyperspectral REE (Rare Earth Element) mapping of outcrops},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400171},
  pages     = {27},
  year      = {2017},
  abstract  = {In this study, an in situ application for identifying neodymium (Nd) enriched surface materials that uses multitemporal hyperspectral images is presented (HySpex sensor). Because of the narrow shape and shallow absorption depth of the neodymium absorption feature, a method was developed for enhancing and extracting the necessary information for neodymium from image spectra, even under illumination conditions that are not optimal. For this purpose, the two following approaches were developed: (1) reducing noise and analyzing changing illumination conditions by averaging multitemporal image scenes and (2) enhancing the depth of the desired absorption band by deconvolving every image spectrum with a Gaussian curve while the rest of the spectrum remains unchanged (Richardson-Lucy deconvolution). To evaluate these findings, nine field samples from the Fen complex in Norway were analyzed using handheld X-ray fluorescence devices and by conducting detailed laboratory-based geochemical rare earth element determinations. The result is a qualitative outcrop map that highlights zones that are enriched in neodymium. To reduce the influences of non-optimal illumination, particularly at the studied site, a minimum of seven single acquisitions is required. Sharpening the neodymium absorption band allows for robust mapping, even at the outer zones of enrichment. From the geochemical investigations, we found that iron oxides decrease the applicability of the method. However, iron-related absorption bands can be used as secondary indicators for sulfidic ore zones that are mainly enriched with rare earth elements. In summary, we found that hyperspectral spectroscopy is a noninvasive, fast and cost-saving method for determining neodymium at outcrop surfaces},
  language  = {en}
}
@misc{CoesfeldKuesterKuechlyetal.2020,
  author    = {Coesfeld, Jacqueline and Kuester, Theres and Kuechly, Helga U. and Kyba, Christopher C. M.},
  title     = {Reducing variability and removing natural light from nighttime satellite imagery: A case study using the VIIRS DNB},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {11},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-52439},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-524397},
  pages     = {15},
  year      = {2020},
  abstract  = {Temporal variation of natural light sources such as airglow limits the ability of night light sensors to detect changes in small sources of artificial light (such as villages). This study presents a method for correcting for this effect globally, using the satellite radiance detected from regions without artificial light emissions. We developed a routine to define an approximate grid of locations worldwide that do not have regular light emission. We apply this method with a 5 degree equally spaced global grid (total of 2016 individual locations), using data from the Visible Infrared Imaging Radiometer Suite (VIIRS) Day-Night Band (DNB). This code could easily be adapted for other future global sensors. The correction reduces the standard deviation of data in the Earth Observation Group monthly DNB composites by almost a factor of two. The code and datasets presented here are available under an open license by GFZ Data Services, and are implemented in the Radiance Light Trends web application.},
  language  = {en}
}
@phdthesis{Conradt2013,
  author    = {Conradt, Tobias},
  title     = {Challenges of regional hydrological modelling in the Elbe River basin : investigations about model fidelity on sub-catchment level},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-65245},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Within a research project about future sustainable water management options in the Elbe River basin, quasi-natural discharge scenarios had to be provided. The semi-distributed eco-hydrological model SWIM was utilised for this task. According to scenario simulations driven by the stochastical climate model STAR, the region would get distinctly drier. However, this thesis focuses on the challenge of meeting the requirement of high model fidelity even for smaller sub-basins. Usually, the quality of the simulations is lower at inner points than at the outlet. Four research paper chapters and the discussion chapter deal with the reasons for local model deviations and the problem of optimal spatial calibration. Besides other assessments, the Markov Chain Monte Carlo method is applied to show whether evapotranspiration or precipitation should be corrected to minimise runoff deviations, principal component analysis is used in an unusual way to evaluate local precipitation alterations by land cover changes, and remotely sensed surface temperatures allow for an independent view on the evapotranspiration landscape. The overall insight is that spatially explicit hydrological modelling of such a large river basin requires a lot of local knowledge. It probably needs more time to obtain such knowledge as is usually provided for hydrological modelling studies.},
  language  = {en}
}
@phdthesis{Crisologo2019,
  author    = {Crisologo, Irene},
  title     = {Using spaceborne radar platforms to enhance the homogeneity of weather radar calibration},
  doi       = {10.25932/publishup-44570},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-445704},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 61},
  year      = {2019},
  abstract  = {Accurate weather observations are the keystone to many quantitative applications, such as precipitation monitoring and nowcasting, hydrological modelling and forecasting, climate studies, as well as understanding precipitation-driven natural hazards (i.e. floods, landslides, debris flow). Weather radars have been an increasingly popular tool since the 1940s to provide high spatial and temporal resolution precipitation data at the mesoscale, bridging the gap between synoptic and point scale observations. Yet, many institutions still struggle to tap the potential of the large archives of reflectivity, as there is still much to understand about factors that contribute to measurement errors, one of which is calibration. Calibration represents a substantial source of uncertainty in quantitative precipitation estimation (QPE). A miscalibration of a few dBZ can easily deteriorate the accuracy of precipitation estimates by an order of magnitude. Instances where rain cells carrying torrential rains are misidentified by the radar as moderate rain could mean the difference between a timely warning and a devastating flood. Since 2012, the Philippine Atmospheric, Geophysical, and Astronomical Services Administration (PAGASA) has been expanding the country's ground radar network. We had a first look into the dataset from one of the longest running radars (the Subic radar) after devastating week-long torrential rains and thunderstorms in August 2012 caused by the annual southwestmonsoon and enhanced by the north-passing Typhoon Haikui. The analysis of the rainfall spatial distribution revealed the added value of radar-based QPE in comparison to interpolated rain gauge observations. However, when compared with local gauge measurements, severe miscalibration of the Subic radar was found. As a consequence, the radar-based QPE would have underestimated the rainfall amount by up to 60\% if they had not been adjusted by rain gauge observations—a technique that is not only affected by other uncertainties, but which is also not feasible in other regions of the country with very sparse rain gauge coverage. Relative calibration techniques, or the assessment of bias from the reflectivity of two radars, has been steadily gaining popularity. Previous studies have demonstrated that reflectivity observations from the Tropical Rainfall Measuring Mission (TRMM) and its successor, the Global Precipitation Measurement (GPM), are accurate enough to serve as a calibration reference for ground radars over low-to-mid-latitudes (± 35 deg for TRMM; ± 65 deg for GPM). Comparing spaceborne radars (SR) and ground radars (GR) requires cautious consideration of differences in measurement geometry and instrument specifications, as well as temporal coincidence. For this purpose, we implement a 3-D volume matching method developed by Schwaller and Morris (2011) and extended by Warren et al. (2018) to 5 years worth of observations from the Subic radar. In this method, only the volumetric intersections of the SR and GR beams are considered. Calibration bias affects reflectivity observations homogeneously across the entire radar domain. Yet, other sources of systematic measurement errors are highly heterogeneous in space, and can either enhance or balance the bias introduced by miscalibration. In order to account for such heterogeneous errors, and thus isolate the calibration bias, we assign a quality index to each matching SR-GR volume, and thus compute the GR calibration bias as a qualityweighted average of reflectivity differences in any sample of matching SR-GR volumes. We exemplify the idea of quality-weighted averaging by using beam blockage fraction (BBF) as a quality variable. Quality-weighted averaging is able to increase the consistency of SR and GR observations by decreasing the standard deviation of the SR-GR differences, and thus increasing the precision of the bias estimates. To extend this framework further, the SR-GR quality-weighted bias estimation is applied to the neighboring Tagaytay radar, but this time focusing on path-integrated attenuation (PIA) as the source of uncertainty. Tagaytay is a C-band radar operating at a lower wavelength and is therefore more affected by attenuation. Applying the same method used for the Subic radar, a time series of calibration bias is also established for the Tagaytay radar. Tagaytay radar sits at a higher altitude than the Subic radar and is surrounded by a gentler terrain, so beam blockage is negligible, especially in the overlapping region. Conversely, Subic radar is largely affected by beam blockage in the overlapping region, but being an SBand radar, attenuation is considered negligible. This coincidentally independent uncertainty contributions of each radar in the region of overlap provides an ideal environment to experiment with the different scenarios of quality filtering when comparing reflectivities from the two ground radars. The standard deviation of the GR-GR differences already decreases if we consider either BBF or PIA to compute the quality index and thus the weights. However, combining them multiplicatively resulted in the largest decrease in standard deviation, suggesting that taking both factors into account increases the consistency between the matched samples. The overlap between the two radars and the instances of the SR passing over the two radars at the same time allows for verification of the SR-GR quality-weighted bias estimation method. In this regard, the consistency between the two ground radars is analyzed before and after bias correction is applied. For cases when all three radars are coincident during a significant rainfall event, the correction of GR reflectivities with calibration bias estimates from SR overpasses dramatically improves the consistency between the two ground radars which have shown incoherent observations before correction. We also show that for cases where adequate SR coverage is unavailable, interpolating the calibration biases using a moving average can be used to correct the GR observations for any point in time to some extent. By using the interpolated biases to correct GR observations, we demonstrate that bias correction reduces the absolute value of the mean difference in most cases, and therefore improves the consistency between the two ground radars. This thesis demonstrates that in general, taking into account systematic sources of uncertainty that are heterogeneous in space (e.g. BBF) and time (e.g. PIA) allows for a more consistent estimation of calibration bias, a homogeneous quantity. The bias still exhibits an unexpected variability in time, which hints that there are still other sources of errors that remain unexplored. Nevertheless, the increase in consistency between SR and GR as well as between the two ground radars, suggests that considering BBF and PIA in a weighted-averaging approach is a step in the right direction. Despite the ample room for improvement, the approach that combines volume matching between radars (either SR-GR or GR-GR) and quality-weighted comparison is readily available for application or further scrutiny. As a step towards reproducibility and transparency in atmospheric science, the 3D matching procedure and the analysis workflows as well as sample data are made available in public repositories. Open-source software such as Python and wradlib are used for all radar data processing in this thesis. This approach towards open science provides both research institutions and weather services with a valuable tool that can be applied to radar calibration, from monitoring to a posteriori correction of archived data.},
  language  = {en}
}
@masterthesis{Eggers2023,
  type      = {Bachelor Thesis},
  author    = {Eggers, Nele},
  title     = {Properties of Arctic aerosol in the transition between Arctic haze to summer season derived by lidar},
  doi       = {10.25932/publishup-61943},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-619438},
  school      = {Universit{\"a}t Potsdam},
  pages     = {x, 63},
  year      = {2023},
  abstract  = {During the Arctic haze period, the Arctic troposphere consists of larger, yet fewer, aerosol particles than during the summer (Tunved et al., 2013; Quinn et al., 2007). Interannual variability (Graßl and Ritter, 2019; Rinke et al., 2004), as well as unknown origins (Stock et al., 2014) and properties of aerosol complicate modeling these annual aerosol cycles. This thesis investigates the modification of the microphysical properties of Arctic aerosols in the transition from Arctic haze to the summer season. Therefore, lidar measurements of Ny-{\AA}lesund from April 2021 to the end of July 2021 are evaluated based on the aerosols' optical properties. An overview of those properties will be provided. Furthermore, parallel radiosonde data is considered for indication of hygroscopic growth. The annual aerosol cycle in 2021 differs from expectations based on previous studies from Tunved et al. (2013) and Quinn et al. (2007). Developments of backscatter, extinction, aerosol depolarisation, lidar ratio and color ratio show a return of the Arctic haze in May. The haze had already reduced in April, but regrew afterwards. The average Arctic aerosol displays hygroscopic behaviour, meaning growth due to water uptake. To determine such a behaviour is generally laborious because various meteorological circumstances need to be considered. Two case studies provide further information on these possible events. In particular, a day with a rare ice cloud and with highly variable water cloud layers is observed.},
  language  = {en}
}