@article{AlNajiSchlaadAntonietti2020,
  author    = {Al-Naji, Majd and Schlaad, Helmut and Antonietti, Markus},
  title     = {New (and old) monomers from biorefineries to make polymer chemistry more sustainable},
  series = {Macromolecular rapid communications},
  volume    = {42},
  journal   = {Macromolecular rapid communications},
  number    = {3},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1022-1336},
  doi       = {10.1002/marc.202000485},
  pages     = {11},
  year      = {2020},
  abstract  = {This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., alpha-methylene-gamma-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers.},
  language  = {en}
}
@misc{AlNajiSchlaadAntonietti2020,
  author    = {Al-Naji, Majd and Schlaad, Helmut and Antonietti, Markus},
  title     = {New (and old) monomers from biorefineries to make polymer chemistry more sustainable},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {3},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-57061},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-570614},
  pages     = {13},
  year      = {2020},
  abstract  = {This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., alpha-methylene-gamma-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers.},
  language  = {en}
}
@article{BehrendtHessLehmannetal.2019,
  author    = {Behrendt, Felix Nicolas and Hess, Andreas and Lehmann, Max and Schmidt, Bernd and Schlaad, Helmut},
  title     = {Polymerization of cystine-derived monomers},
  series = {Polymer Chemistry},
  volume    = {10},
  journal   = {Polymer Chemistry},
  number    = {13},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1759-9954},
  doi       = {10.1039/c9py00118b},
  pages     = {1636 -- 1641},
  year      = {2019},
  abstract  = {Cystine was used as a platform chemical to prepare cyclic and acyclic monomers for entropy-driven ringopening polymerization (ED-ROMP) via olefin or disulfide metathesis and for step-growth polymerization. The olefin ED-ROMP of an olefin/disulfide containing 16-atom macrocycle using the 3rd generation Grubbs catalyst was examined in greater detail. Kinetic studies revealed that the catalyst turned inactive during the polymerization, which limited the achievable (apparent) polymer molar mass to similar to 70 kg mol(-1). Such limitation could be overcome with the disulfide ED-ROMP of the same macrocycle to yield polymers with molar masses of up to 180 kg mol(-1). The step-growth polymerizations of acyclic diene and dithiol monomers via olefin metathesis or oxidation were far less effective and yielded just low molar mass polymers or oligomers; photopolymerization of a thiol-ene monomer produced a polyester with a molar mass of 35 kg mol(-1).},
  language  = {en}
}
@misc{BehrendtSchlaad2016,
  author    = {Behrendt, Felix Nicolas and Schlaad, Helmut},
  title     = {Metathesis polymerization of cystine-based macrocycles},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-395080},
  pages     = {4},
  year      = {2016},
  abstract  = {Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached ∼80\% in equilibrium and the produced poly(ester-amine-disulfide-alkene)s exhibited apparent molar masses (Mappw) of up to 80 kDa and dispersities (Đ) of ∼2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide.},
  language  = {en}
}
@article{BehrendtSchlaad2018,
  author    = {Behrendt, Felix Nicolas and Schlaad, Helmut},
  title     = {Entropy-Driven Ring-Opening Disulfide Metathesis Polymerization for the Synthesis of Functional Poly(disulfide)s},
  series = {Macromolecular rapid communications},
  volume    = {39},
  journal   = {Macromolecular rapid communications},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1022-1336},
  doi       = {10.1002/marc.201700735},
  pages     = {4},
  year      = {2018},
  abstract  = {Metal-free entropy-driven disulfide metathesis polymerization of unsaturated L-cystine based macrocycles produces high-molar-mass heterofunctional poly(disulfide)s, i.e., poly(ester-disulfide-alkene) and poly(amide-disulfide-alkene); M-w(app) = 44-60 kDa, (sic) > 1.7. The polymerization is fast and reaches equilibrium within 1-5 minutes (monomer conversion 70-90\%) in polar aprotic solvents such as N,N-dimethylacetamide, dimethylsulfoxide, or y-valerolactone. Thiol-terminated polymers are stable in bulk or when dissolved in weakly polar solvents, but rapidly depolymerize in dilute polar solution.},
  language  = {en}
}
@article{BehrendtSchlaad2017,
  author    = {Behrendt, Felix Nicolas and Schlaad, Helmut},
  title     = {Metathesis polymerization of cystine-based macrocycles},
  series = {Polymer Chemistry},
  volume    = {8},
  journal   = {Polymer Chemistry},
  number    = {2},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1759-9954},
  doi       = {10.1039/c6py01864e},
  pages     = {366 -- 369},
  year      = {2017},
  abstract  = {Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached similar to 80\% in equilibrium and the produced poly (ester-amine-disulfide-alkene)s exhibited apparent molar masses (M-w(app)) of up to 80 kDa and dispersities (D) of similar to 2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide.},
  language  = {en}
}
@article{BogomolovaSeckerKoetzetal.2017,
  author    = {Bogomolova, Anna and Secker, Christian and Koetz, Joachim and Schlaad, Helmut},
  title     = {Thermo-induced multistep assembly of double-hydrophilic block copolypeptoids in water},
  series = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft},
  volume    = {295},
  journal   = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft},
  publisher = {Springer},
  address   = {New York},
  issn      = {0303-402X},
  doi       = {10.1007/s00396-017-4044-6},
  pages     = {1305 -- 1312},
  year      = {2017},
  abstract  = {The aqueous solution behavior of thermoresponsive-hydrophilic block copolypeptoids, i.e., poly(N-(n-propyl)glycine) (x) -block-poly(N-methylglycine) (y) (x = 70; y = 23, 42, 76), in the temperature range of 20-45 A degrees C is studied. Turbidimetric analyses of the 0.1 wt\% aqueous solutions reveal two cloud points at T (cp)similar to 30 and 45 A degrees C and a clearing point in between at T (cl)similar to 42 A degrees C. Temperature-dependent dynamic light scattering (DLS) suggest that right above the first collapse temperature, single polymer molecules assemble into large structures which upon further heating, i.e., at the clearing point temperature, disassemble into micelle-like structures. Upon further heating, the aggregates start to grow again in size, as recognized by the second cloud point, through a crystallization process.},
  language  = {en}
}
@article{BrosnanSchlaad2014,
  author    = {Brosnan, Sarah M. and Schlaad, Helmut},
  title     = {Modification of polypeptide materials by Thiol-X chemistry},
  series = {Polymer : the international journal for the science and technology of polymers},
  volume    = {55},
  journal   = {Polymer : the international journal for the science and technology of polymers},
  number    = {22},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0032-3861},
  doi       = {10.1016/j.polymer.2014.08.067},
  pages     = {5511 -- 5516},
  year      = {2014},
  abstract  = {Thiol-X chemistry has proven to be a valuable toolbox for modification of peptides, proteins, monomers, and polymers. Recently, this has become especially true for the modification of polypeptides (monomers or polymers), which has resulted in a plethora of novel polymers and materials. With this in mind, this highlight focuses on the recent literature concerning the modification of polypeptides by the use of thiol-X chemistry, in particular to synthetic polypeptides either at the monomer or polymer stage modified by thiol-ene, -Michael addition, and -yne chemistries. (C) 2014 Published by Elsevier Ltd.},
  language  = {en}
}
@article{BrosnanSchlaadAntonietti2015,
  author    = {Brosnan, Sarah M. and Schlaad, Helmut and Antonietti, Markus},
  title     = {Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles},
  series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  volume    = {54},
  journal   = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  number    = {33},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1433-7851},
  doi       = {10.1002/anie.201502100},
  pages     = {9715 -- 9718},
  year      = {2015},
  abstract  = {Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics.},
  language  = {en}
}
@article{CasseShkilnyyLindersetal.2012,
  author    = {Casse, Olivier and Shkilnyy, Andriy and Linders, J{\"u}rgen and Mayer, Christian and H{\"a}ussinger, Daniel and V{\"o}lkel, Antje and Th{\"u}nemann, Andreas F. and Dimova, Rumiana and C{\"o}lfen, Helmut and Meier, Wolfgang P. and Schlaad, Helmut and Taubert, Andreas},
  title     = {Solution behavior of double-hydrophilic block copolymers in dilute aqueous solution},
  series = {Macromolecules : a publication of the American Chemical Society},
  volume    = {45},
  journal   = {Macromolecules : a publication of the American Chemical Society},
  number    = {11},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0024-9297},
  doi       = {10.1021/ma300621g},
  pages     = {4772 -- 4777},
  year      = {2012},
  abstract  = {The self-assembly of double-hydrophilic poly(ethylene oxide)-poly(2-methyl-2-oxazoline) diblock copolymers in water has been studied. Isothermal titration calorimetry, small-angle X-ray scattering, and analytical ultracentrifugation suggest that only single polymer chains are present in solution. In contrast, light scattering and transmission electron microscopy detect aggregates with radii of ca. 100 nm. Pulsed field gradient NMR spectroscopy confirms the presence of aggregates, although only 2\% of the polymer chains undergo aggregation. Water uptake experiments indicate differences in the hydrophilicity of the two blocks, which is believed to be the origin of the unexpected aggregation behavior (in accordance with an earlier study by Ke et al. [Macromolecules 2009, 42, 5339-5344]). The data therefore suggest that even in double-hydrophilic block copolymers, differences in hydrophilicity are sufficient to drive polymer aggregation, a phenomenon that has largely been overlooked or ignored so far.},
  language  = {en}
}