@article{WolfPhamMatthewsetal.2020, author = {Wolf, Sabina and Pham, My and Matthews, Nathanial and Bubeck, Philip}, title = {Understanding the implementation gap}, series = {Climate \& development}, volume = {13}, journal = {Climate \& development}, number = {1}, publisher = {Taylor \& Francis LTD}, address = {Abingdon}, issn = {1756-5529}, doi = {10.1080/17565529.2020.1724068}, pages = {81 -- 94}, year = {2020}, abstract = {In recent years, nature-based solutions are receiving increasing attention in the field of disaster risk reduction and climate change adaptation as inclusive, no regret approaches. Ecosystem-based adaptation (EbA) can mitigate the impacts of climate change, build resilience and tackle environmental degradation thereby supporting the targets set by the 2030 Agenda, the Paris Agreement and the Sendai Framework. Despite these benefits, EbA is still rarely implemented in practice. To better understand the barriers to implementation, this research examines policy-makers' perceptions of EbA, using an extended version of Protection Motivation Theory as an analytical framework. Through semi-structured interviews with policy-makers at regional and provincial level in Central Vietnam, it was found that EbA is generally considered a promising response option, mainly due to its multiple ecosystem-service benefits. The demand for EbA measures was largely driven by the perceived consequences of natural hazards and climate change. Insufficient perceived response efficacy and time-lags in effectiveness for disaster risk reduction were identified as key impediments for implementation. Pilot projects and capacity building on EbA are important means to overcome these perceptual barriers. This paper contributes to bridging the knowledge-gap on political decision-making regarding EbA and can, thereby, promote its mainstreaming into policy plans.}, language = {en} } @article{RoetzlerTimmerman2020, author = {R{\"o}tzler, Jochen and Timmerman, Martin Jan}, title = {Geochronological and petrological constraints from the evolution in the Saxon Granulite Massif, Germany, on the Variscan continental collision orogeny}, series = {Journal of metamorphic geology}, volume = {39}, journal = {Journal of metamorphic geology}, number = {1}, publisher = {Wiley}, address = {Hoboken}, issn = {0263-4929}, doi = {10.1111/jmg.12559}, pages = {3 -- 38}, year = {2020}, abstract = {Controversy over the plate tectonic affinity and evolution of the Saxon granulites in a two- or multi-plate setting during inter- or intracontinental collision makes the Saxon Granulite Massif a key area for the understanding of the Palaeozoic Variscan orogeny. The massif is a large dome structure in which tectonic slivers of metapelite and metaophiolite units occur along a shear zone separating a diapir-like body of high-Pgranulite below from low-Pmetasedimentary rocks above. Each of the upper structural units records a different metamorphic evolution until its assembly with the exhuming granulite body. New age and petrologic data suggest that the metaophiolites developed from early Cambrian protoliths during high-Pamphibolite facies metamorphism in the mid- to late-Devonian and thermal overprinting by the exhuming hot granulite body in the early Carboniferous. A correlation of new Ar-Ar biotite ages with publishedP-T-tdata for the granulites implies that exhumation and cooling of the granulite body occurred at average rates of similar to 8 mm/year and similar to 80 degrees C/Ma, with a drop in exhumation rate from similar to 20 to similar to 2.5 mm/year and a slight rise in cooling rate between early and late stages of exhumation. A time lag ofc. 2 Ma between cooling through the closure temperatures for argon diffusion in hornblende and biotite indicates a cooling rate of 90 degrees C/Ma when all units had assembled into the massif. A two-plate model of the Variscan orogeny in which the above evolution is related to a short-lived intra-Gondwana subduction zone conflicts with the oceanic affinity of the metaophiolites and the timescale ofc. 50 Ma for the metamorphism. Alternative models focusing on the internal Variscan belt assume distinctly different material paths through the lower or upper crust for strikingly similar granulite massifs. An earlier proposed model of bilateral subduction below the internal Variscan belt may solve this problem.}, language = {en} } @article{ScharfSudoPracejusetal.2020, author = {Scharf, Andreas and Sudo, Masafumi and Pracejus, Bernhard and Mattern, Frank and Callegari, Ivan and Bauer, Wilfried and Scharf, Katharina}, title = {Late Lutetian (Eocene) mafic intrusion into shallow marine platform deposits north of the Oman Mountains (Rusayl Embayment) and its tectonic significance}, series = {Journal of African earth sciences}, volume = {170}, journal = {Journal of African earth sciences}, publisher = {Elsevier}, address = {Oxford}, issn = {1464-343X}, doi = {10.1016/j.jafrearsci.2020.103941}, pages = {15}, year = {2020}, abstract = {A silica undersaturated alkali-olivine basanitic magma intruded the late Paleocene/early Eocene Jafnayn Formation near Muscat. Geochemical analyses indicate that a significant amount of host rock (limestone) was assimilated into the magma. We dated the basanite as 42.7 +/- 1.0 Ma (2 sigma error; late Lutetian), using the whole rock Ar-40/Ar-39 step-wise heating technique. Intrusion occurred in the hanging wall of a major regional extensional shear zone (Frontal Range Fault, FRF) bounding the northern margin of two domes within the Oman Mountains (Jabal Akhdar and Saih Hatat domes). Two shear intervals along the FRF have been documented. The first interval lasted immediately after emplacement of the Semail Ophiolite (latest Cretaceous-early Eocene) while the second and poorly constrained interval was assumed to have occurred during the Oligocene. The proximity of the basanite to the FRF suggests that magma used extensional faults for the upper part of its ascent path. Reactivated Permian rift faults of the Pangaea rift or other preexisting faults may have been used for the lower ascent part. We conclude that the basanite intrusion coincided with the onset of the second deformation interval along the FRF, because (1) the position of the basanite is near a dextral releasing bend, associated with the second shear interval, (2) the overlap of our Ar-40/Ar-39 age with the cooling curves for rocks from the nearby Jabal Akhdar Dome, and (3) the basanite postdates the first FRF deformation episode by > 10 Ma. Thus, the second interval along the FRF had started already during the late Lutetian and probably lasted into the Miocene.}, language = {en} } @article{WeatherillCotton2020, author = {Weatherill, Graeme and Cotton, Fabrice}, title = {A ground motion logic tree for seismic hazard analysis in the stable cratonic region of Europe}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {18}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {14}, publisher = {Springer Science + Business Media B.V.}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-020-00940-x}, pages = {6119 -- 6148}, year = {2020}, abstract = {Regions of low seismicity present a particular challenge for probabilistic seismic hazard analysis when identifying suitable ground motion models (GMMs) and quantifying their epistemic uncertainty. The 2020 European Seismic Hazard Model adopts a scaled backbone approach to characterise this uncertainty for shallow seismicity in Europe, incorporating region-to-region source and attenuation variability based on European strong motion data. This approach, however, may not be suited to stable cratonic region of northeastern Europe (encompassing Finland, Sweden and the Baltic countries), where exploration of various global geophysical datasets reveals that its crustal properties are distinctly different from the rest of Europe, and are instead more closely represented by those of the Central and Eastern United States. Building upon the suite of models developed by the recent NGA East project, we construct a new scaled backbone ground motion model and calibrate its corresponding epistemic uncertainties. The resulting logic tree is shown to provide comparable hazard outcomes to the epistemic uncertainty modelling strategy adopted for the Eastern United States, despite the different approaches taken. Comparison with previous GMM selections for northeastern Europe, however, highlights key differences in short period accelerations resulting from new assumptions regarding the characteristics of the reference rock and its influence on site amplification.}, language = {en} } @article{ZhuPilzCotton2020, author = {Zhu, Chuanbin and Pilz, Marco and Cotton, Fabrice}, title = {Evaluation of a novel application of earthquake HVSR in site-specific amplification estimation}, series = {Soil dynamics and earthquake engineering}, volume = {139}, journal = {Soil dynamics and earthquake engineering}, publisher = {Elsevier}, address = {Oxford}, issn = {0267-7261}, doi = {10.1016/j.soildyn.2020.106301}, pages = {14}, year = {2020}, abstract = {Ground response analyses (GRA) model the vertical propagations of SH waves through flat-layered media (1DSH) and are widely carried out to evaluate local site effects in practice. Horizontal-to-vertical spectral ratio (HVSR) technique is a cost-effective approach to extract certain site-specific information, e.g., site fundamental frequency (f(0)), but HVSR values cannot be directly used to approximate the levels of S-wave amplifications. Motivated by the work of Kawase et al. (2019), we propose a procedure to correct earthquake HVSR amplitudes for direct amplification estimations. The empirical correction compensates HVSR by generic vertical amplification spectra categorized by the vertical fundamental frequency (f(0v)) via kappa-means clustering. In this investigation, we evaluate the effectiveness of the corrected HVSR in approximating observed linear amplifications in comparison with 1DSH modellings. We select a total of 90 KiK-net (Kiban Kyoshin network) surface-downhole sites which are found to have no velocity contrasts below their boreholes and thus of which surface-to-borehole spectral ratios (SBSRs) can be taken as their empirical transfer functions (ETFs). 1DSH-based theoretical transfer functions (TTFs) are computed in the linear domain considering uncertainties in Vs profiles through randomizations. Five goodness-of-fit metrics are adopted to gauge the closeness between observed (ETF) and predicted (i.e., TTF and corrected HVSR) amplifications in both amplitude and spectral shape over frequencies from f(0) to 25 Hz. We find that the empirical correction to HVSR is highly effective and achieves a "good match" in both spectral shape and amplitude at the majority of the 90 KiK-net sites, as opposed to less than one-third for the 1DSH modelling. In addition, the empirical correction does not require a velocity model, which GRAs require, and thus has great potentials in seismic hazard assessments.}, language = {en} } @article{RiedlMelnickMibeietal.2020, author = {Riedl, Simon and Melnick, Daniel and Mibei, Geoffrey K. and Njue, Lucy and Strecker, Manfred}, title = {Continental rifting at magmatic centres}, series = {Journal of the geological society}, volume = {177}, journal = {Journal of the geological society}, number = {1}, publisher = {Geological Soc. Publ. House}, address = {Bath}, issn = {0016-7649}, doi = {10.1144/jgs2019-021}, pages = {153 -- 169}, year = {2020}, abstract = {The structural evolution of calderas in rifts helps to characterize the spatiotemporal relationships between magmatism, long wavelength crustal deformation and the formation of tectonic deformation zones along the rift axis. We document the structural characteristics of the c. 36 ka old Menengai Caldera located within a young zone of extension in the central Kenya Rift. Field mapping and high-resolution digital surface models show that NNE-striking Holocene normal faults perpendicular to the regional ESE-WNWextension direction dominate the interior sectors of the rift. Inside the caldera, these structures are overprinted by post-collapse doming and faulting of the magmatic centre, resulting in obliquely slipping normal faults bounding a resurgence horst. Radiocarbon dating of faulted units as young as 5 ka cal BP and the palaeo-shorelines of a lake formed during the African Humid Period in the Nakuru Basin indicate that volcanism and fault activity inside and in the vicinity of Menengai must have been sustained during the Holocene. Our analysis confirms that the caldera is located at the centre of an extending rift segment and suggests that other magmatic centres and young zones of faulting along the volcano-tectonic axis of the Kenya Rift may constitute nucleation points of faulting that ultimately foster future continental break-up.}, language = {en} } @article{SchmidtHesseAttingeretal.2020, author = {Schmidt, Lennart and Hesse, Falk and Attinger, Sabine and Kumar, Rohini}, title = {Challenges in applying machine learning models for hydrological inference}, series = {Water resources research}, volume = {56}, journal = {Water resources research}, number = {5}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0043-1397}, doi = {10.1029/2019WR025924}, pages = {10}, year = {2020}, abstract = {Machine learning (ML) algorithms are being increasingly used in Earth and Environmental modeling studies owing to the ever-increasing availability of diverse data sets and computational resources as well as advancement in ML algorithms. Despite advances in their predictive accuracy, the usefulness of ML algorithms for inference remains elusive. In this study, we employ two popular ML algorithms, artificial neural networks and random forest, to analyze a large data set of flood events across Germany with the goals to analyze their predictive accuracy and their usability to provide insights to hydrologic system functioning. The results of the ML algorithms are contrasted against a parametric approach based on multiple linear regression. For analysis, we employ a model-agnostic framework named Permuted Feature Importance to derive the influence of models' predictors. This allows us to compare the results of different algorithms for the first time in the context of hydrology. Our main findings are that (1) the ML models achieve higher prediction accuracy than linear regression, (2) the results reflect basic hydrological principles, but (3) further inference is hindered by the heterogeneity of results across algorithms. Thus, we conclude that the problem of equifinality as known from classical hydrological modeling also exists for ML and severely hampers its potential for inference. To account for the observed problems, we propose that when employing ML for inference, this should be made by using multiple algorithms and multiple methods, of which the latter should be embedded in a cross-validation routine.}, language = {en} } @article{OttoKempka2020, author = {Otto, Christopher and Kempka, Thomas}, title = {Synthesis gas composition prediction for underground coal gasification using a thermochemical equilibrium modeling approach}, series = {Energies}, volume = {13}, journal = {Energies}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {10.3390/en13051171}, pages = {17}, year = {2020}, abstract = {Underground coal gasification (UCG) is an in situ conversion technique that enables the production of high-calorific synthesis gas from resources that are economically not minable by conventional methods. A broad range of end-use options is available for the synthesis gas, including fuels and chemical feedstock production. Furthermore, UCG also offers a high potential for integration with Carbon Capture and Storage (CCS) to mitigate greenhouse gas emissions. In the present study, a stoichiometric equilibrium model, based on minimization of the Gibbs function has been used to estimate the equilibrium composition of the synthesis gas. Thereto, we further developed and applied a proven thermodynamic equilibrium model to simulate the relevant thermochemical coal conversion processes (pyrolysis and gasification). Our modeling approach has been validated against thermodynamic models, laboratory gasification experiments and UCG field trial data reported in the literature. The synthesis gas compositions have been found to be in good agreement under a wide range of different operating conditions. Consequently, the presented modeling approach enables an efficient quantification of synthesis gas quality resulting from UCG, considering varying coal and oxidizer compositions at deposit-specific pressures and temperatures.}, language = {en} } @article{AllroggenBeiterTronicke2020, author = {Allroggen, Niklas and Beiter, Daniel and Tronicke, Jens}, title = {Ground-penetrating radar monitoring of fast subsurface processes}, series = {Geophysics}, volume = {85}, journal = {Geophysics}, number = {3}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2019-0737.1}, pages = {A19 -- A23}, year = {2020}, abstract = {Earth and environmental sciences rely on detailed information about subsurface processes. Whereas geophysical techniques typically provide highly resolved spatial images, monitoring subsurface processes is often associated with enormous effort and, therefore, is usually limited to point information in time or space. Thus, the development of spatial and temporal continuous field monitoring methods is a major challenge for the understanding of subsurface processes. We have developed a novel method for ground-penetrating-radar (GPR) reflection monitoring of subsurface flow processes under unsaturated conditions and applied it to a hydrological infiltration experiment performed across a periglacial slope deposit in northwest Luxembourg. Our approach relies on a spatial and temporal quasicontinuous data recording and processing, followed by an attribute analysis based on analyzing differences between individual time steps. The results demonstrate the ability of time-lapse GPR monitoring to visualize the spatial and temporal dynamics of preferential flow processes with a spatial resolution in the order of a few decimeters and temporal resolution in the order of a few minutes. We observe excellent agreement with water table information originating from different boreholes. This demonstrates the potential of surface-based GPR reflection monitoring to observe the spatiotemporal dynamics of water movements in the subsurface. It provides valuable, and so far not accessible, information for example in the field of hydrology and pedology that allows studying the actual subsurface processes rather than deducing them from point information.}, language = {en} } @article{RichterHainzlDahmetal.2020, author = {Richter, Gudrun and Hainzl, Sebastian and Dahm, Torsten and Z{\"o}ller, Gert}, title = {Stress-based, statistical modeling of the induced seismicity at the Groningen gas field}, series = {Environmental earth sciences}, volume = {79}, journal = {Environmental earth sciences}, number = {11}, publisher = {Springer}, address = {New York}, issn = {1866-6280}, doi = {10.1007/s12665-020-08941-4}, pages = {15}, year = {2020}, abstract = {Groningen is the largest onshore gas field under production in Europe. The pressure depletion of the gas field started in 1963. In 1991, the first induced micro-earthquakes have been located at reservoir level with increasing rates in the following decades. Most of these events are of magnitude less than 2.0 and cannot be felt. However, maximum observed magnitudes continuously increased over the years until the largest, significant event with ML=3.6 was recorded in 2014, which finally led to the decision to reduce the production. This causal sequence displays the crucial role of understanding and modeling the relation between production and induced seismicity for economic planing and hazard assessment. Here we test whether the induced seismicity related to gas exploration can be modeled by the statistical response of fault networks with rate-and-state-dependent frictional behavior. We use the long and complete local seismic catalog and additionally detailed information on production-induced changes at the reservoir level to test different seismicity models. Both the changes of the fluid pressure and of the reservoir compaction are tested as input to approximate the Coulomb stress changes. We find that the rate-and-state model with a constant tectonic background seismicity rate can reproduce the observed long delay of the seismicity onset. In contrast, so-called Coulomb failure models with instantaneous earthquake nucleation need to assume that all faults are initially far from a critical state of stress to explain the delay. Our rate-and-state model based on the fluid pore pressure fits the spatiotemporal pattern of the seismicity best, where the fit further improves by taking the fault density and orientation into account. Despite its simplicity with only three free parameters, the rate-and-state model can reproduce the main statistical features of the observed activity.}, language = {en} }