@article{LueckGuillemoteauTronickeetal.2022, author = {L{\"u}ck, Erika and Guillemoteau, Julien and Tronicke, Jens and Rummel, Udo and Hierold, Wilfried}, title = {From point to field scale-indirect monitoring of soil moisture variations at the DWD test site in Falkenberg}, series = {Geoderma : an international journal of soil science}, volume = {427}, journal = {Geoderma : an international journal of soil science}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0016-7061}, doi = {10.1016/j.geoderma.2022.116134}, pages = {15}, year = {2022}, abstract = {Information regarding the spatial distribution of soil water content is key in many disciplines and applications including soil and atmospheric sciences, hydrology, and agricultural engineering. Thus, within the past decades various experimental methods and strategies have been developed to map spatial variations in soil moisture distribution and to monitor temporal changes. Our study examines the combination of electrical resistivity mapping and point observations of soil moisture to infer the spatial and the temporal variability of soil moisture. Over a period of around two years, we performed field measurements on six days to collect repeated electrical resistivity mapping data for a nine-hectare test site south-east of Berlin, Germany. Permanently installed TDR probes, temporary TDR measurements within permanently installed tubes, and gravimetric measurements using soil samples provided soil moisture data at various selected points. In addition, soil analysis and classification results are available for 132 regularly distributed positions up to depths of 1.2 m. We compare and link three-dimensional resistivity models obtained via data inversion to soil composition and soil moisture as provided by our point data. Both the soil samples and the resistivity models indicate a two-layer medium characterized by a sandy top layer with varying thickness and a loamy bottom soil. For all six field campaigns, we observe similar resistivity patterns reflecting the temporally stable influence of soil texture. While the overall patterns are stable, the range of resistivity values changes with soil moisture. Finally, to estimate spatial models of soil moisture, we link our soil moisture and resistivity data using empirical petrophysical models relying on a second order polynomial function. We observe a mean prediction error for soil moisture of +/-0.034 m3 \& BULL; m? 3 using all observation points while we notice that point-specific models further reduce the error. Thus, we conclude that our experimental and data analysis strategies represent a reliable approach to establish site-specific models and to estimate three-dimensional moisture distribution including temporal variations.}, language = {en} } @phdthesis{Heckenbach2024, author = {Heckenbach, Esther Lina}, title = {Geodynamic modeling of process interactions at continental plate boundaries}, doi = {10.25932/publishup-64750}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-647500}, school = {Universit{\"a}t Potsdam}, pages = {127}, year = {2024}, abstract = {Plate tectonic boundaries constitute the suture zones between tectonic plates. They are shaped by a variety of distinct and interrelated processes and play a key role in geohazards and georesource formation. Many of these processes have been previously studied, while many others remain unaddressed or undiscovered. In this work, the geodynamic numerical modeling software ASPECT is applied to shed light on further process interactions at continental plate boundaries. In contrast to natural data, geodynamic modeling has the advantage that processes can be directly quantified and that all parameters can be analyzed over the entire evolution of a structure. Furthermore, processes and interactions can be singled out from complex settings because the modeler has full control over all of the parameters involved. To account for the simplifying character of models in general, I have chosen to study generic geological settings with a focus on the processes and interactions rather than precisely reconstructing a specific region of the Earth. In Chapter 2, 2D models of continental rifts with different crustal thicknesses between 20 and 50 km and extension velocities in the range of 0.5-10 mm/yr are used to obtain a speed limit for the thermal steady-state assumption, commonly employed to address the temperature fields of continental rifts worldwide. Because the tectonic deformation from ongoing rifting outpaces heat conduction, the temperature field is not in equilibrium, but is characterized by a transient, tectonically-induced heat flow signal. As a result, I find that isotherm depths of the geodynamic evolution models are shallower than a temperature distribution in equilibrium would suggest. This is particularly important for deep isotherms and narrow rifts. In narrow rifts, the magnitude of the transient temperature signal limits a well-founded applicability of the thermal steady-state assumption to extension velocities of 0.5-2 mm/yr. Estimation of the crustal temperature field affects conclusions on all temperature-dependent processes ranging from mineral assemblages to the feasible exploitation of a geothermal reservoir. In Chapter 3, I model the interactions of different rheologies with the kinematics of folding and faulting using the example of fault-propagation folds in the Andean fold-and-thrust belt. The evolution of the velocity fields from geodynamic models are compared with those from trishear models of the same structure. While the latter use only geometric and kinematic constraints of the main fault, the geodynamic models capture viscous, plastic, and elastic deformation in the entire model domain. I find that both models work equally well for early, and thus relatively simple stages of folding and faulting, while results differ for more complex situations where off-fault deformation and secondary faulting are present. As fault-propagation folds can play an important role in the formation of reservoirs, knowledge of fluid pathways, for example via fractures and faults, is crucial for their characterization. Chapter 4 deals with a bending transform fault and the interconnections between tectonics and surface processes. In particular, the tectonic evolution of the Dead Sea Fault is addressed where a releasing bend forms the Dead Sea pull-apart basin, while a restraining bend further to the North resulted in the formation of the Lebanese mountains. I ran 3D coupled geodynamic and surface evolution models that included both types of bends in a single setup. I tested various randomized initial strain distributions, showing that basin asymmetry is a consequence of strain localization. Furthermore, by varying the surface process efficiency, I find that the deposition of sediment in the pull-apart basin not only controls basin depth, but also results in a crustal flow component that increases uplift at the restraining bend. Finally, in Chapter 5, I present the computational basis for adding further complexity to plate boundary models in ASPECT with the implementation of earthquake-like behavior using the rate-and-state friction framework. Despite earthquakes happening on a relatively small time scale, there are many interactions between the seismic cycle and the long time spans of other geodynamic processes. Amongst others, the crustal state of stress as well as the presence of fluids or changes in temperature may alter the frictional behavior of a fault segment. My work provides the basis for a realistic setup of involved structures and processes, which is therefore important to obtain a meaningful estimate for earthquake hazards. While these findings improve our understanding of continental plate boundaries, further development of geodynamic software may help to reveal even more processes and interactions in the future.}, language = {en} } @article{ScherbaumMzhavanadzeRosenzweigetal.2022, author = {Scherbaum, Frank and Mzhavanadze, Nana and Rosenzweig, Sebastian and M{\"u}ller, Meinard}, title = {Tuning systems of traditional Georgian singing determined from a new corpus of field recordings}, series = {Musicologist}, volume = {6}, journal = {Musicologist}, number = {2}, publisher = {Trabzon Univ State Conservatory}, address = {Trabzon}, issn = {2618-5652}, doi = {10.33906/musicologist.1068947}, pages = {142 -- 168}, year = {2022}, abstract = {In this study we examine the tonal organization of the 2016 GVM dataset, a newly-created corpus of high-quality multimedia field recordings of traditional Georgian singing with a focus on Svaneti. For this purpose, we developed a new processing pipeline for the computational analysis of non-western polyphonic music which was subsequently applied to the complete 2016 GVM dataset. To evaluate under what conditions a single tuning system is representative of current Svan performance practice, we examined the stability of the obtained tuning systems from an ensemble-, a song-, and a corpus-related perspective. Furthermore, we compared the resulting Svan tuning systems with the tuning systems obtained for the Erkomaishvili dataset (Rosenzweig et al., 2020) in the study by Scherbaum et al. (2020). In comparison to a 12-TET (12-tone-equal-temperament) system, the Erkomaishvili and the Svan tuning systems are surprisingly similar. Both systems show a strong presence of pure fourths (500 cents) and fifths (700 cents), and 'neutral' thirds (peaking around 350 cents) as well as 'neutral' sixths. In addition, the sizes of the melodic and the harmonic seconds in both tuning systems differ systematically from each other, with the size of the harmonic second being systematically larger than the melodic one.}, language = {en} } @article{BannisterBertrandHeimannetal.2022, author = {Bannister, Stephen and Bertrand, Edward A. and Heimann, Sebastian and Bourguignon, Sandra and Asher, Cameron and Shanks, Jackson and Harvison, Adrian}, title = {Imaging sub-caldera structure with local seismicity, Okataina Volcanic Centre, Taupo Volcanic Zone, using double-difference seismic tomography}, series = {Journal of volcanology and geothermal research}, volume = {431}, journal = {Journal of volcanology and geothermal research}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0377-0273}, doi = {10.1016/j.jvolgeores.2022.107653}, pages = {16}, year = {2022}, abstract = {We examine sub-caldera structure and seismicity in and around the Okataina Volcanic Centre (OVC), Taupo Volcanic Zone, New Zealand, using seismic data collected over 4+ years with a temporary array of broadband and short-period seismometers, supplementing data from the permanent New Zealand seismometer network. We derive a new 3-D image of P-wave seismic velocity for the upper crust in the region, using double-difference seismic tomography and utilising waveform cross-correlations. We subsequently relocate 6989 earthquakes which occurred in the region over the 2010-2021 time period, using the 3D velocity model. The seismicity distribution shows spatial clusters west of Lake Rotomahana, as well as beneath Haroharo and the Makatiti Dome, inside the Okataina caldera. Beneath Makatiti Dome 90\% of the events are shallower than 7.7 +/- 0.5 km. Outside of the Okataina caldera event relocations highlight short (similar to 3-4 km long) streaks of activity in the Ngakuru graben, part of the active Taupo Rift southwest of Okataina caldera. Inside the OVC the relocated seismicity beneath Makatiti appears closely associated with low (similar to 10\%) P-wave velocity anomalies, which we resolve in the similar to 5-to-8-km depth range beneath the Okataina caldera, and which are likely related to partial melt and/or fluid-volatile pathways. Moment tensor analyses for two larger-magnitude events (M(L)4.5 and M(L)4.9) near Haroharo indicate normal faulting, with NNE-SSW fault strike, but with positive CLVD and positive isotropic components when allowing for a full moment tensor, consistent with a magmatic environment with degassing and/or fluid migration.}, language = {en} } @misc{SchoenfeldtPanekWinocuretal.2020, author = {Schoenfeldt, Elisabeth and Panek, Tomas and Winocur, Diego and Silhan, Karel and Korup, Oliver}, title = {Corrigendum to: postglacial Patagonian mass movement}, series = {Geomorphology : an international journal on pure and applied geomorphology}, volume = {373}, journal = {Geomorphology : an international journal on pure and applied geomorphology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0169-555X}, doi = {10.1016/j.geomorph.2020.107471}, pages = {1}, year = {2020}, language = {en} } @article{KothariBattistiBooteetal.2022, author = {Kothari, Kritika and Battisti, Rafael and Boote, Kenneth J. and Archontoulis, Sotirios and Confalone, Adriana and Constantin, Julie and Cuadra, Santiago and Debaeke, Philippe and Faye, Babacar and Grant, Brian and Hoogenboom, Gerrit and Jing, Qi and van der Laan, Michael and Macena da Silva, Fernando Antonio and Marin, Fabio R. and Nehbandani, Alireza and Nendel, Claas and Purcell, Larry C. and Qian, Budong and Ruane, Alex C. and Schoving, Celine and Silva, Evandro H. F. M. and Smith, Ward and Soltani, Afshin and Srivastava, Amit and Vieira, Nilson A. and Slone, Stacey and Salmeron, Montserrat}, title = {Are soybean models ready for climate change food impact assessments?}, series = {European journal of agronomy : the official journal of the European Society for Agronomy}, volume = {135}, journal = {European journal of agronomy : the official journal of the European Society for Agronomy}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1161-0301}, doi = {10.1016/j.eja.2022.126482}, pages = {15}, year = {2022}, abstract = {An accurate estimation of crop yield under climate change scenarios is essential to quantify our ability to feed a growing population and develop agronomic adaptations to meet future food demand. A coordinated evaluation of yield simulations from process-based eco-physiological models for climate change impact assessment is still missing for soybean, the most widely grown grain legume and the main source of protein in our food chain. In this first soybean multi-model study, we used ten prominent models capable of simulating soybean yield under varying temperature and atmospheric CO2 concentration [CO2] to quantify the uncertainty in soybean yield simulations in response to these factors. Models were first parametrized with high quality measured data from five contrasting environments. We found considerable variability among models in simulated yield responses to increasing temperature and [CO2]. For example, under a + 3 degrees C temperature rise in our coolest location in Argentina, some models simulated that yield would reduce as much as 24\%, while others simulated yield increases up to 29\%. In our warmest location in Brazil, the models simulated a yield reduction ranging from a 38\% decrease under + 3 degrees C temperature rise to no effect on yield. Similarly, when increasing [CO2] from 360 to 540 ppm, the models simulated a yield increase that ranged from 6\% to 31\%. Model calibration did not reduce variability across models but had an unexpected effect on modifying yield responses to temperature for some of the models. The high uncertainty in model responses indicates the limited applicability of individual models for climate change food projections. However, the ensemble mean of simulations across models was an effective tool to reduce the high uncertainty in soybean yield simulations associated with individual models and their parametrization. Ensemble mean yield responses to temperature and [CO2] were similar to those reported from the literature. Our study is the first demonstration of the benefits achieved from using an ensemble of grain legume models for climate change food projections, and highlights that further soybean model development with experiments under elevated [CO2] and temperature is needed to reduce the uncertainty from the individual models.}, language = {en} } @article{RajewarMohanaLakshmiMohantyetal.2021, author = {Rajewar, S. K. and Mohana Lakshmi, Ch. and Mohanty, Aditya and Pandey, Dwijendra N. and Pandey, Anshuman and Chaurasia, Anurag and Pandey, Ananya and Rajeswar Rao, V. and Naidu, M. S. and Kumar, Amit and Mondal, Saroj K. and Yadav, Rajeev K. and Catherine, J. K. and Giri, R. K. and Gahalaut, Vineet Kumar}, title = {Constraining plate motion and crustal deformation from GNSS measurements}, series = {Journal of the Geological Society of India}, volume = {97}, journal = {Journal of the Geological Society of India}, number = {10}, publisher = {Springer India}, address = {New Delhi}, issn = {0974-6889}, doi = {10.1007/s12594-021-1850-8}, pages = {1207 -- 1213}, year = {2021}, abstract = {Geodetic studies of crustal deformation using Global Navigation Satellite System (GNSS, earlier commonly referred to as Global Positioning System, GPS) measurements at CSIR-NGRI started in 1995 with the installation of a permanent GNSS station at CSIR-NGRI Hyderabad which later became an International GNSS Service (IGS) site. The CSIR-NGRI started expanding its GNSS networks after 2003 with more focussed studies through installation in the NE India, Himalayan arc, Andaman subduction zone, stable and failed rift regions of India plate. In each instance, these measurements helped in unravelling the geodynamics of the region and seismic hazard assessment, e.g., the discovery of a plate boundary fault in the Indo-Burmese wedge, rate and mode of strain accumulation and its spatial variation in the Garhwal-Kumaun and Kashmir region of the Himalayan arc, the influence of non-tectonic deformation on tectonic deformation in the Himalayan arc, nature of crustal deformation through earthquake cycle in the Andaman Sumatra subduction zone, and localised deformation in the intraplate region and across the paleo rift regions. Besides these, GNSS measurements initiated in the Antarctica region have helped in understanding the plate motion and influence of seasonal variations on deformation. Another important by-product of the GNSS observations is the capabilities of these observations in understanding the ionospheric variations due to earthquake processes and also due to solar eclipse. We summarize these outcomes in this article.}, language = {en} } @article{PłociennikZawiskaRzodkiewiczetal.2022, author = {Pł{\´o}ciennik, Mateusz and Zawiska, Izabela and Rzodkiewicz, Monika and Noryśkiewicz, Agnieszka M. and Słowiński, Michał and M{\"u}ller, Daniela and Brauer, Achim and Antczak-Orlewska, Olga and Kramkowski, Mateusz and Peyron, Odile and Nevalainen, Liisa and Luoto, Tomi P. and Kotrys, Bartosz and Sepp{\"a}, Heikki and Bidaurreta, Jon Camuera and Rudna, Marta and Mielczarek, Małgorzata and Zawisza, Edyta and Janowska, Ewa and Błaszkiewicz, Mirosław}, title = {Climatic and hydrological variability as a driver of the Lake Gościąż biota during the Younger Dryas}, series = {Catena}, volume = {212}, journal = {Catena}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0341-8162}, doi = {10.1016/j.catena.2022.106049}, pages = {15}, year = {2022}, abstract = {The Younger Dryas (YD) is a roughly 1,100-year cold period marking the end of the last glaciation. Climate modelling for northern Europe indicates high summer temperatures and strong continentality. In eastern Europe, the scale of temperature variation and its influence on ecosystems is weakly recognised. Here, we present a multi-proxy reconstruction of YD conditions from Lake Gos ' ciaz (central Poland). The decadal-resolution analysis of its annually varved sediments indicates an initial decrease in Chironomidae-inferred mean July air temperature followed by steady warming. The pollen-inferred winter-to-summer temperature amplitude and annual precip-itation is highest at the Allerod/YD transition and the early YD (ca. 12.7-12.4 ky cal BP) and YD/Holocene (11.7-11.4 ka cal BP) transition. Temperature and precipitation were the main reasons for lake level fluctuations as reflected in the planktonic/littoral Cladocera ratio. The lake's diatom-inferred total phosphorus decreased with increasing summer temperature from about mid YD. Windy conditions in the early YD until ~12.3 ka cal BP caused water mixing and a short-lived/temporary increase in nutrient availability for phytoplankton. The Chironomidae-inferred summer temperature and pollen inferred summer temperature, winter temperature and annual precipitation herein are one of only a few in eastern Europe conducted with such high resolution.}, language = {en} } @article{LupienRussellPearsonetal.2022, author = {Lupien, Rachel L. and Russell, James M. and Pearson, Emma J. and Castaneda, Isla S. and Asrat, Asfawossen and F{\"o}rster, Verena and Lamb, Henry F. and Roberts, Helen M. and Sch{\"a}bitz, Frank and Trauth, Martin H. and Beck, Catherine C. and Feibel, Craig S. and Cohen, Andrew S.}, title = {Orbital controls on eastern African hydroclimate in the Pleistocene}, series = {Scientific reports}, volume = {12}, journal = {Scientific reports}, number = {1}, publisher = {Macmillan Publishers Limited}, address = {London}, issn = {2045-2322}, doi = {10.1038/s41598-022-06826-z}, pages = {10}, year = {2022}, abstract = {Understanding eastern African paleoclimate is critical for contextualizing early human evolution, adaptation, and dispersal, yet Pleistocene climate of this region and its governing mechanisms remain poorly understood due to the lack of long, orbitally-resolved, terrestrial paleoclimate records. Here we present leaf wax hydrogen isotope records of rainfall from paleolake sediment cores from key time windows that resolve long-term trends, variations, and high-latitude effects on tropical African precipitation. Eastern African rainfall was dominantly controlled by variations in low-latitude summer insolation during most of the early and middle Pleistocene, with little evidence that glacial-interglacial cycles impacted rainfall until the late Pleistocene. We observe the influence of high-latitude-driven climate processes emerging from the last interglacial (Marine Isotope Stage 5) to the present, an interval when glacial-interglacial cycles were strong and insolation forcing was weak. Our results demonstrate a variable response of eastern African rainfall to low-latitude insolation forcing and high-latitude-driven climate change, likely related to the relative strengths of these forcings through time and a threshold in monsoon sensitivity. We observe little difference in mean rainfall between the early, middle, and late Pleistocene, which suggests that orbitally-driven climate variations likely played a more significant role than gradual change in the relationship between early humans and their environment.}, language = {en} } @article{DeFelipeAlcaldeBaykievetal.2022, author = {DeFelipe, Irene and Alcalde, Juan and Baykiev, Eldar and Bernal, Isabel and Boonma, Kittiphon and Carbonell, Ramon and Flude, Stephanie and Folch, Arnau and Fullea, Javier and Garc{\´i}a-Castellanos, Daniel and Geyer, Adelina and Giralt, Santiago and Hern{\´a}ndez, Armand and Jim{\´e}nez-Munt, Ivone and Kumar, Ajay and Llorens, Maria-Gema and Mart{\´i}, Joan and Molina, Cecilia and Olivar-Casta{\~n}o, Andr{\´e}s and Parnell, Andrew and Schimmel, Martin and Torn{\´e}, Montserrat and Ventosa, Sergi}, title = {Towards a digital twin of the Earth system: Geo-Soft-CoRe, a geoscientific software \& code repository}, series = {Frontiers in earth science}, volume = {10}, journal = {Frontiers in earth science}, publisher = {Frontiers Media}, address = {Lausanne}, issn = {2296-6463}, doi = {10.3389/feart.2022.828005}, pages = {20}, year = {2022}, abstract = {The immense advances in computer power achieved in the last decades have had a significant impact in Earth science, providing valuable research outputs that allow the simulation of complex natural processes and systems, and generating improved forecasts. The development and implementation of innovative geoscientific software is currently evolving towards a sustainable and efficient development by integrating models of different aspects of the Earth system. This will set the foundation for a future digital twin of the Earth. The codification and update of this software require great effort from research groups and therefore, it needs to be preserved for its reuse by future generations of geoscientists. Here, we report on Geo-Soft-CoRe, a Geoscientific Software \& Code Repository, hosted at the archive DIGITAL.CSIC. This is an open source, multidisciplinary and multiscale collection of software and code developed to analyze different aspects of the Earth system, encompassing tools to: 1) analyze climate variability; 2) assess hazards, and 3) characterize the structure and dynamics of the solid Earth. Due to the broad range of applications of these software packages, this collection is useful not only for basic research in Earth science, but also for applied research and educational purposes, reducing the gap between the geosciences and the society. By providing each software and code with a permanent identifier (DOI), we ensure its self-sustainability and accomplish the FAIR (Findable, Accessible, Interoperable and Reusable) principles. Therefore, we aim for a more transparent science, transferring knowledge in an easier way to the geoscience community, and encouraging an integrated use of computational infrastructure.}, language = {en} }