@phdthesis{ValverdeSerrano2011,
  author    = {Valverde Serrano, Clara},
  title     = {Self-assembly behavior in hydrophilic block copolymers},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-54163},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Block copolymers are receiving increasing attention in the literature. Reports on amphiphilic block copolymers have now established the basis of their self-assembly behavior: aggregate sizes, morphologies and stability can be explained from the absolute and relative block lengths, the nature of the blocks, the architecture and also solvent selectiveness. In water, self-assembly of amphiphilic block copolymers is assumed to be driven by the hydrophobic. The motivation of this thesis is to study the influence on the self-assembly in water of A b B type block copolymers (with A hydrophilic) of the variation of the hydrophilicity of B from non-soluble (hydrophobic) to totally soluble (hydrophilic). Glucose-modified polybutadiene-block-poly(N-isopropylacrylamide) copolymers were prepared and their self-assembly behavior in water studied. The copolymers formed vesicles with an asymmetric membrane with a glycosylated exterior and poly(N-isopropylacrylamide) on the inside. Above the low critical solution temperature (LCST) of poly(N-isopropylacrylamide), the structure collapsed into micelles with a hydrophobic PNIPAM core and glycosylated exterior. This collapse was found to be reversible. As a result, the structures showed a temperature-dependent interaction with L-lectin proteins and were shown to be able to encapsulate organic molecules. Several families of double hydrophilic block copolymers (DHBC) were prepared. The blocks of these copolymers were biopolymers or polymer chimeras used in aqueous two-phase partition systems. Copolymers based on dextran and poly(ethylene glycol) blocks were able to form aggregates in water. Dex6500-b-PEG5500 copolymer spontaneously formed vesicles with PEG as the "less hydrophilic" barrier and dextran as the solubilizing block. The aggregates were found to be insensitive to the polymer's architecture and concentration (in the dilute range) and only mildly sensitive to temperature. Variation of the block length, yielded different morphologies. A longer PEG chain seemed to promote more curved aggregates following the inverse trend usually observed in amphiphilic block copolymers. A shorter dextran promoted vesicular structures as usually observed for the amphiphilic counterparts. The linking function was shown to have an influence of the morphology but not on the self-assembly capability in itself. The vesicles formed by dex6500-b-PEG5500 showed slow kinetics of clustering in the presence of Con A lectin. In addition both dex6500-b-PEG5500 and its crosslinked derivative were able to encapsulate fluorescent dyes. Two additional dextran-based copolymers were synthesized, dextran-b-poly(vinyl alcohol) and dextran-b-poly(vinyl pyrrolidone). The study of their self-assembly allowed to conclude that aqueous two-phase systems (ATPS) is a valid source of inspiration to conceive DHBCs capable of self-assembling. In the second part the principle was extended to polypeptide systems with the synthesis of a poly(N-hydroxyethylglutamine)-block-poly(ethylene glycol) copolymer. The copolymer that had been previously reported to have emulsifying properties was able to form vesicles by direct dissolution of the solid in water. Last, a series of thermoresponsive copolymers were prepared, dextran-b-PNIPAMm. These polymers formed aggregates below the LCST. Their structure could not be unambiguously elucidated but seemed to correspond to vesicles. Above the LCST, the collapse of the PNIPAM chains induced the formation of stable objects of several hundreds of nanometers in radius that evolved with increasing temperature. The cooling of these solution below LCST restored the initial aggregates. This self-assembly of DHBC outside any stimuli of pH, ionic strength, or temperature has only rarely been described in the literature. This work constituted the first formal attempt to frame the phenomenon. Two reasons were accounted for the self-assembly of such systems: incompatibility of the polymer pairs forming the two blocks (enthalpic) and a considerable solubility difference (enthalpic and entropic). The entropic contribution to the positive Gibbs free energy of mixing is believed to arise from the same loss of conformational entropy that is responsible for "the hydrophobic effect" but driven by a competition for water of the two blocks. In that sense this phenomenon should be described as the "hydrophilic effect".},
  language  = {en}
}
@phdthesis{Klinkusch2011,
  author    = {Klinkusch, Stefan},
  title     = {Simulations of laser-induced correlated many-electron dynamics in molecular systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-55445},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In this thesis, simulations of laser-driven many-electron dynamics in molecules are presented, i.e., the interaction between molecules and an electromagnetic field is demonstrated. When a laser field is applied to a molecular system, a population of higher electronic states takes place as well as other processes, e.g. photoionization, which is described by an appropriate model. Also, a finite lifetime of an excited state can be described by such a model. In the second part, a method is postulated that is capable of describing electron correlation in a time-dependent scheme. This is done by introducing a single-electron entropy that is at least temporarily minimized in a further step.},
  language  = {en}
}
@phdthesis{Popovic2011,
  author    = {Popovic, Jelena},
  title     = {Novel lithium iron phosphate materials for lithium-ion batteries},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-54591},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Conventional energy sources are diminishing and non-renewable, take million years to form and cause environmental degradation. In the 21st century, we have to aim at achieving sustainable, environmentally friendly and cheap energy supply by employing renewable energy technologies associated with portable energy storage devices. Lithium-ion batteries can repeatedly generate clean energy from stored materials and convert reversely electric into chemical energy. The performance of lithium-ion batteries depends intimately on the properties of their materials. Presently used battery electrodes are expensive to be produced; they offer limited energy storage possibility and are unsafe to be used in larger dimensions restraining the diversity of application, especially in hybrid electric vehicles (HEVs) and electric vehicles (EVs). This thesis presents a major progress in the development of LiFePO4 as a cathode material for lithium-ion batteries. Using simple procedure, a completely novel morphology has been synthesized (mesocrystals of LiFePO4) and excellent electrochemical behavior was recorded (nanostructured LiFePO4). The newly developed reactions for synthesis of LiFePO4 are single-step processes and are taking place in an autoclave at significantly lower temperature (200 deg. C) compared to the conventional solid-state method (multi-step and up to 800 deg. C). The use of inexpensive environmentally benign precursors offers a green manufacturing approach for a large scale production. These newly developed experimental procedures can also be extended to other phospho-olivine materials, such as LiCoPO4 and LiMnPO4. The material with the best electrochemical behavior (nanostructured LiFePO4 with carbon coating) was able to delive a stable 94\% of the theoretically known capacity.},
  language  = {en}
}
@phdthesis{Goebel2011,
  author    = {G{\"o}bel, Ronald},
  title     = {Hybridmaterialien aus mesopor{\"o}sen Silica und ionischen Fl{\"u}ssigkeiten},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-54022},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Die vorliegende Arbeit besch{\"a}ftigt sich mit der Synthese und Charakterisierung mesopor{\"o}ser monolithischer Silica und deren Hybridmaterialien mit Ionischen Fl{\"u}ssigkeiten (ILs, ionic liquids). Zur Synthese der Silicaproben wurde ein Sol-Gel-Verfahren, ausgehend von einer Pr{\"a}kursorverbindung wie Tetramethylorthosilicat angewendet. Der Katalysator mit der geringsten Basizit{\"a}t f{\"u}hrte zum Material mit der kleinsten Porengr{\"o}ße und der gr{\"o}ßten spezifischen Oberfl{\"a}che. Eine Kombination von por{\"o}sen Silica mit ILs f{\"u}hrt zur Materialklasse der Silica-Ionogele. Diese Hybridmaterialien verbinden die Eigenschaften eines por{\"o}sen Festk{\"o}rpers mit denen einer IL (Leitf{\"a}higkeit, weites elektrochemisches Fenster, gute thermische Stabilit{\"a}t) und bieten vielf{\"a}ltige Einsatzm{\"o}glichkeiten z.B. in der Katalyse- Solar- und Sensortechnik. Um diese Materialien f{\"u}r ihren Verwendungszweck zu optimieren, bedarf es deren umfassenden Charakterisierung. Daher wurde in der vorliegenden Arbeit das thermische Verhalten von Silica-Ionogelen unter Verwendung verschiedener 1-Ethyl-3-methylimidazolium [Emim]-basierter ILs untersucht. Interessanterweise zeigen die untersuchten ILs deutliche {\"A}nderungen in ihrem thermischen Verhalten, wenn diese in por{\"o}sen Materialien eingeschlossen werden (Confinement). W{\"a}hrend sich die untersuchten reinen ILs durch klar unterscheidbare Phasen{\"u}berg{\"a}nge auszeichnen, konnten f{\"u}r die entsprechenden Hybridmaterialien deutlich schw{\"a}cher ausgepr{\"a}gte {\"U}berg{\"a}nge beobachtet werden. Einzelne Phasen{\"u}berg{\"a}nge wurden unterdr{\"u}ckt (Glas- und Kristallisations{\"u}berg{\"a}nge), w{\"a}hrend z.B. Schmelz{\"u}berg{\"a}nge in verbreiterten Temperaturbereichen, zum Teil als einzeln getrennte Schmelzpeaks beobachtet wurden. Diese Untersuchungen belegen deutliche Eigenschafts{\"a}nderungen der ILs in eingeschr{\"a}nkten Geometrien. {\"U}ber Festk{\"o}rper-NMR-Spektroskopie konnte außerdem gezeigt werden, daß die ILs in den mesopor{\"o}sen Silicamaterialien eine unerwartet hohe Mobilit{\"a}t aufweisen. Die ILs k{\"o}nnen als quasi-fl{\"u}ssig bezeichnet werden und zeigen die nach bestem Wissen h{\"o}chste Mobilit{\"a}t, die bisher f{\"u}r vergleichbare Hybridmaterialien beobachtet wurde. Durch Verwendung von funktionalisierten Pr{\"a}kursoren, sowie der Wahl der Reaktionsbedingungen, kann die Oberfl{\"a}che der Silicamaterialien chemisch funktionalisiert werden und damit die Materialeigenschaften in der gew{\"u}nschten Weise beeinflußt werden. In der vorliegenden Arbeit wurde der Einfluß der Oberfl{\"a}chenfunktionalit{\"a}t auf das thermische Verhalten hin untersucht. Dazu wurden zwei verschiedene M{\"o}glichkeiten der Funktionalisierung angewendet und miteinander verglichen. Bei der in-situ-Funktionalisierung wird die chemische Funktionalit{\"a}t w{\"a}hrend der Sol-Gel-Synthese {\"u}ber ein entsprechend funktionalisiertes Silan mit in das Silicamaterial einkondensiert. Eine postsynthetische Funktionalisierung erfolgt durch Reaktion der Endgruppen eines Silicamaterials mit geeigneten Reaktionspartnern. Um den Einfluß der physikalischen Eigenschaften der Probe auf die Reaktion zu untersuchen, wurden pulverisierte und monolithische Silicamaterialien miteinander verglichen. Im letzten Teil der Arbeit wurde die Vielf{\"a}ltigkeit, mit der Silicamaterialien postsynthetisch funktionalisiert werden k{\"o}nnen demonstriert. Durch die Kenntnis von Struktur-Eigenschaftsbeziehungen k{\"o}nnen die Eigenschaften von Silica-Ionogelen durch die geeignete Kombination von fester und mobiler Phase in der gew{\"u}nschten Weise ver{\"a}ndert werden. Die vorliegende Arbeit soll einen Beitrag zur Untersuchung dieser Beziehungen leisten, um das Potential dieser interessanten Materialien f{\"u}r Anwendungen nutzen zu k{\"o}nnen.},
  language  = {de}
}
@phdthesis{Weiss2011,
  author    = {Weiß, Jan},
  title     = {Synthesis and self-assembly of multiple thermoresponsive amphiphilic block copolymers},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53360},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In the present thesis, the self-assembly of multi thermoresponsive block copolymers in dilute aqueous solution was investigated by a combination of turbidimetry, dynamic light scattering, TEM measurements, NMR as well as fluorescence spectroscopy. The successive conversion of such block copolymers from a hydrophilic into a hydrophobic state includes intermediate amphiphilic states with a variable hydrophilic-to-lipophilic balance. As a result, the self-organization is not following an all-or-none principle but a multistep aggregation in dilute solution was observed. The synthesis of double thermoresponsive diblock copolymers as well as triple thermoresponsive triblock copolymers was realized using twofold-TMS labeled RAFT agents which provide direct information about the average molar mass as well as residual end group functionality from a routine proton NMR spectrum. First a set of double thermosensitive diblock copolymers poly(N-n-propylacrylamide)-b-poly(N-ethylacrylamide) was synthesized which differed only in the relative size of the two blocks. Depending on the relative block lengths, different aggregation pathways were found. Furthermore, the complementary TMS-labeled end groups served as NMR-probes for the self-assembly of these diblock copolymers in dilute solution. Reversible, temperature sensitive peak splitting of the TMS-signals in NMR spectroscopy was indicative for the formation of mixed star-/flower-like micelles in some cases. Moreover, triple thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (A), poly(methoxydiethylene glycol acrylate) (B) and poly(N-ethylacrylamide) (C) were obtained from sequential RAFT polymerization in all possible block sequences (ABC, BAC, ACB). Their self-organization behavior in dilute aqueous solution was found to be rather complex and dependent on the positioning of the different blocks within the terpolymers. Especially the localization of the low-LCST block (A) had a large influence on the aggregation behavior. Above the first cloud point, aggregates were only observed when the A block was located at one terminus. Once placed in the middle, unimolecular micelles were observed which showed aggregation only above the second phase transition temperature of the B block. Carrier abilities of such triple thermosensitive triblock copolymers tested in fluorescence spectroscopy, using the solvatochromic dye Nile Red, suggested that the hydrophobic probe is less efficiently incorporated by the polymer with the BAC sequence as compared to ABC or ACB polymers above the first phase transition temperature. In addition, due to the problem of increasing loss of end group functionality during the subsequent polymerization steps, a novel concept for the one-step synthesis of multi thermoresponsive block copolymers was developed. This allowed to synthesize double thermoresponsive di- and triblock copolymers in a single polymerization step. The copolymerization of different N-substituted maleimides with a thermosensitive styrene derivative (4-vinylbenzyl methoxytetrakis(oxyethylene) ether) led to alternating copolymers with variable LCST. Consequently, an excess of this styrene-based monomer allowed the synthesis of double thermoresponsive tapered block copolymers in a single polymerization step.},
  language  = {en}
}
@phdthesis{Kubo2011,
  author    = {Kubo, Shiori},
  title     = {Nanostructured carbohydrate-derived carbonaceous materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53157},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Nanoporous carbon materials are widely used in industry as adsorbents or catalyst supports, whilst becoming increasingly critical to the developing fields of energy storage / generation or separation technologies. In this thesis, the combined use of carbohydrate hydrothermal carbonisation (HTC) and templating strategies is demonstrated as an efficient route to nanostructured carbonaceous materials. HTC is an aqueous-phase, low-temperature (e.g. 130 - 200 °C) carbonisation, which proceeds via dehydration / poly-condensation of carbon precursors (e.g. carbohydrates and their derivatives), allowing facile access to highly functional carbonaceous materials. Whilst possessing utile, modifiable surface functional groups (e.g. -OH and -C=O-containing moieties), materials synthesised via HTC typically present limited accessible surface area or pore volume. Therefore, this thesis focuses on the development of fabrication routes to HTC materials which present enhanced textural properties and well-defined porosity. In the first discussed synthesis, a combined hard templating / HTC route was investigated using a range of sacrificial inorganic templates (e.g. mesoporous silica beads and macroporous alumina membranes (AAO)). Via pore impregnation of mesoporous silica beads with a biomass-derived carbon source (e.g. 2-furaldehyde) and subsequent HTC at 180 oC, an inorganic / carbonaceous hybrid material was produced. Removal of the template component by acid etching revealed the replication of the silica into mesoporous carbonaceous spheres (particle size ~ 5 μm), representing the inverse morphological structure of the original inorganic body. Surface analysis (e.g. FTIR) indicated a material decorated with hydrophilic (oxygenated) functional groups. Further thermal treatment at increasingly elevated temperatures (e.g. at 350, 550, 750 oC) under inert atmosphere allowed manipulation of functionalities from polar hydrophilic to increasingly non-polar / hydrophobic structural motifs (e.g. extension of the aromatic / pseudo-graphitic nature), thus demonstrating a process capable of simultaneous control of nanostructure and surface / bulk chemistry. As an extension of this approach, carbonaceous tubular nanostructures with controlled surface functionality were synthesised by the nanocasting of uniform, linear macropores of an AAO template (~ 200 nm). In this example, material porosity could be controlled, showing increasingly microporous tube wall features as post carbonisation temperature increased. Additionally, by taking advantage of modifiable surface groups, the introduction of useful polymeric moieties (i.e. grafting of thermoresponsive poly(N-isopropylacrylamide)) was also demonstrated, potentially enabling application of these interesting tubular structures in the fields of biotechnology (e.g. enzyme immobilization) and medicine (e.g. as drug micro-containers). Complimentary to these hard templating routes, a combined HTC / soft templating route for the direct synthesis of ordered porous carbonaceous materials was also developed. After selection of structural directing agents and optimisation of synthesis composition, the F127 triblock copolymer (i.e. ethylene oxide (EO)106 propylene oxide (PO)70 ethylene oxide (EO)106) / D-Fructose system was extensively studied. D-Fructose was found to be a useful carbon precursor as the HTC process could be performed at 130 oC, thus allowing access to stable micellular phase. Thermolytic template removal from the synthesised ordered copolymer / carbon composite yielded functional cuboctahedron single crystalline-like particles (~ 5 μm) with well ordered pore structure of a near perfect cubic Im3m symmetry. N2 sorption analysis revealed a predominantly microporous carbonaceous material (i.e. Type I isotherm, SBET = 257 m2g-1, 79 \% microporosity) possessing a pore size of ca. 0.9 nm. The addition of a simple pore swelling additive (e.g. trimethylbenzene (TMB)) to this system was found to direct pore size into the mesopore size domain (i.e. Type IV isotherm, SBET = 116 m2g-1, 60 \% mesoporosity) generating pore size of ca. 4 nm. It is proposed that in both cases as HTC proceeds to generate a polyfuran-like network, the organised block copolymer micellular phase is essentially "templated", either via hydrogen bonding between hydrophilic poly(EO) moiety and the carbohydrate or via hydrophobic interaction between hydrophobic poly(PO) moiety and forming polyfuran-like network, whilst the additive TMB presumably interact with poly(PO) moieties, thus swelling the hydrophobic region expanding the micelle template size further into the mesopore range.},
  language  = {en}
}
@phdthesis{Tan2011,
  author    = {Tan, Irene},
  title     = {Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53130},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as 'intelligent materials' and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature 'switch' in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive.},
  language  = {en}
}
@phdthesis{Schumacher2011,
  author    = {Schumacher, Soeren},
  title     = {Saccharide recognition : boronic acids as receptors in polymeric networks},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52869},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In this thesis entitled "Saccharide Recognition - Boronic acids as Receptors in Polymeric Networks" different aspects of boronic acid synthesis, their analysis and incorporation or attachment to different polymeric networks and characterisation thereof were investigated. The following key aspects were considered: • Provision of a variety of different characterised arylboronic acids and benzoboroxoles • Attachment of certain derivatives to nanoparticles and the characterisation of saccharide binding by means of isothermal titration calorimetry and displacement assay (ARS) to enhance the association constant to saccharides at pH 7.4 • Enhancement of selectivity in polymeric systems by means of molecular imprinting using fructose as template and a polymerisable benzoboroxole as functional monomer for the recognition at pH 7.4 (Joined by a diploma thesis of F. Gr{\"u}neberger) • Development of biomimetic saccharide structures and the development of saccharide (especially glucose and fructose) binding MIPs by using these structures as template molecules. In the first part of the thesis different arylboronic acid derivatives were synthesised and their binding to glucose or fructose was investigated by means of isothermal titration calorimetry (ITC). It could be derived, which is in parallel to the literature, that derivatives bearing a methylhydroxyl-group in ortho-position to the boron (benzoboroxole) exhibit in most cases a two-fold higher association constant compared to the corresponding phenylboronic acid derivative. To gain a deeper understanding NMR spectroscopy and mass spectrometry with the benzoboroxole and glucose or fructose was performed. It could be shown that the exchange rate in terms of NMR time scale is quite slow since in titration experiments new peaks appeared. Via mass spectrometry of a mixture between benzoboroxole and glucose or fructose, different binding stoichiometries could be detected showing that the binding of saccharides is comparable with their binding to phenylboronic acid. In addition, the use of Alizarin Red S as an electrochemical reporter was described for the first time to monitor the saccharide binding to arylboronic acids not only with spectroscopy. Here, the redox behaviour and the displacement were recorded by cyclic voltammograms. In the second part different applications of boronic acids in polymeric networks were investigated. The attachment of benzoboroxoles to nanoparticles was investigated and monitored by means of isothermal titration calorimetry and a colourimetric assay with Alizarin Red S as the report dye. The investigations by isothermal titration calorimetry compared the fructose binding of arylboronic acids and benzoboroxoles coupled to these nanoparticles and "free" in solution. It could be shown that the attached derivatives showed a higher binding constant due to an increasing entropy term. This states for possible multivalent binding combined with a higher water release. Since ITC could not characterise the binding of glucose to these nanoparticles due to experimental restrictions the glucose binding at pH 7.4 was shown with ARS. Here, the displacement of ARS by fructose and also glucose could be followed and consequently these nanoparticles can be used for saccharide determination. Within this investigation also the temperature stability of these nanoparticles was examined and after normal sterilisation procedures (121°C, 20 min.) the binding behaviour was still unchanged. To target the selectivity of the used polymeric networks, molecular imprinting was used as a technique for creating artificial binding pockets on a molecular scale. As functional monomer 3-methacrylamidobenzoboroxole was introduced for the recognition of fructose. In comparison to polymers prepared with vinylphenylboronic acid the benzoboroxole containing polymer had a stronger binding at pH 7.4 which was shown for the first time. In addition, another imprinted polymer was synthesised especially for the recognition of glucose and fructose employing biomimetic saccharide analogues as template molecule. The advantage to use the saccharide analogues is the defined template-functional monomer complex during the polymerisation which is not the case, for example, for glucose-boronic acid interaction. The biomimetic character was proven through structural superimposition of crystal structures of the analogues with already described crystal structures of boronic acid esters of glucose and fructose. A molecularly imprinted polymer was synthesised with vinylphenylboronic acid as the functional monomer to show that both glucose and fructose are able to bind to the polymer which was predicted by the structural similarity of the analogues. The major scientific contributions of this thesis are • the determination of binding constants for some, not yet reported saccharide - boronic acid / benzoboroxole pairs, • the use of ARS as electrochemical reporter for saccharide detection, • the thermodynamic characterisation of a saccharide binding nanoparticle system containing benzoboroxole and functioning at pH 7.4, • the use of a polymerisable benzoboroxole as functional monomer for saccharide recognition in neutral, aqueous environments • and the synthesis and utilisation of biomimetic saccharide analogues as template molecules especially for the development of a glucose binding MIP.},
  language  = {en}
}
@phdthesis{Kopetzki2011,
  author    = {Kopetzki, Daniel},
  title     = {Exploring hydrothermal reactions : from prebiotic synthesis to green chemistry},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52581},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In this thesis chemical reactions under hydrothermal conditions were explored, whereby emphasis was put on green chemistry. Water at high temperature and pressure acts as a benign solvent. Motivation to work under hydrothermal conditions was well-founded in the tunability of physicochemical properties with temperature, e.g. of dielectric constant, density or ion product, which often resulted in surprising reactivity. Another cornerstone was the implementation of the principles of green chemistry. Besides the use of water as solvent, this included the employment of a sustainable feedstock and the sensible use of resources by minimizing waste and harmful intermediates and additives. To evaluate the feasibility of hydrothermal conditions for chemical synthesis, exemplary reactions were performed. These were carried out in a continuous flow reactor, allowing for precise control of reaction conditions and kinetics measurements. In most experiments a temperature of 200 °C in combination with a pressure of 100 bar was chosen. In some cases the temperature was even raised to 300 °C. Water in this subcritical range can also be found in nature at hydrothermal vents on the ocean floor. On the primitive earth, environments with such conditions were however present in larger numbers. Therefore we tested whether biologically important carbohydrates could be formed at high temperature from the simple, probably prebiotic precursor formaldehyde. Indeed, this formose reaction could be carried out successfully, although the yield was lower compared to the counterpart reaction under ambient conditions. However, striking differences regarding selectivity and necessary catalysts were observed. At moderate temperatures bases and catalytically active cations like Ca2+ are necessary and the main products are hexoses and pentoses, which accumulate due to their higher stability. In contrast, in high-temperature water no catalyst was necessary but a slightly alkaline solution was sufficient. Hexoses were only formed in negligible amounts, whereas pentoses and the shorter carbohydrates accounted for the major fraction. Amongst the pentoses there was some preference for the formation of ribose. Even deoxy sugars could be detected in traces. The observation that catalysts can be avoided was successfully transferred to another reaction. In a green chemistry approach platform chemicals must be produced from sustainable resources. Carbohydrates can for instance be employed as a basis. They can be transformed to levulinic acid and formic acid, which can both react via a transfer hydrogenation to the green solvent and biofuel gamma-valerolactone. This second reaction usually requires catalysis by Ru or Pd, which are neither sustainable nor low-priced. Under hydrothermal conditions these heavy metals could be avoided and replaced by cheap salts, taking advantage of the temperature dependence of the acid dissociation constant. Simple sulfate was recognized as a temperature switchable base. With this additive high yield could be achieved by simultaneous prevention of waste. In contrast to conventional bases, which create salt upon neutralization, a temperature switchable base becomes neutral again when cooled down and thus can be reused. This adds another sustainable feature to the high atom economy of the presented hydrothermal synthesis. In a last study complex decomposition pathways of biomass were investigated. Gas chromatography in conjunction with mass spectroscopy has proven to be a powerful tool for the identification of unknowns. It was observed that several acids were formed when carbohydrates were treated with bases at high temperature. This procedure was also applied to digest wood. Afterwards it was possible to fermentate the solution and a good yield of methane was obtained. This has to be regarded in the light of the fact that wood practically cannot be used as a feedstock in a biogas factory. Thus the hydrothermal pretreatment is an efficient means to employ such materials as well. Also the reaction network of the hydrothermal decomposition of glycine was investigated using isotope-labeled compounds as comparison for the unambiguous identification of unknowns. This refined analysis allowed the identification of several new molecules and pathways, not yet described in literature. In summary several advantages could be taken from synthesis in high-temperature water. Many catalysts, absolutely necessary under ambient conditions, could either be completely avoided or replaced by cheap, sustainable alternatives. In this respect water is not only a green solvent, but helps to prevent waste and preserves resources.},
  language  = {en}
}
@phdthesis{Jiang2011,
  author    = {Jiang, Yuan},
  title     = {Precursor phases in non-classical crystallization},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52460},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {The main objective of this thesis is to understand molecular crystallization as a multistep process with or without polymeric additives, including transient liquid-liquid phase separation, nanocrystal nucleation within the dense phase, and subsequent nanocrystal self-assembly or self-organization in sequence. The thesis starts with a quaternary model system, containing DL-Glutamic acid (Glu), polyethyleneimine (PEI), water, and EtOH, for the understanding of multistep precipitation of Glu with PEI as an additive. The experiments were performed by mixing Glu-PEI aqueous solution with a non-solvent EtOH. First, the phase diagram of the quaternary system is determined, obtaining precipitate, coacervates, or homogeneous mixtures by varying Glu/PEI w/w and water/EtOH v/v. Coacervation is observed to occur over a wide range of Glu/PEI with various volumes. The composition of coacervates is conveniently characterized by nuclear magnetic resonance spectroscopy. The observed coacervates are thermodynamically stable phases rich in solute, which is different from metastable polymer-induced liquid precursors. The combination of atomic force microscopy, small angle scattering, and ξ-potential measurements confirms the coexistence of monomers and Glu/PEI complexes and the aggregation of complexes in Glu-PEI-water systems. This suggests that there might be a direct structural transformation between the Glu-PEI complexes in aqueous solution and the metastable liquid precursors in a water-EtOH mixture. The multistep mechanism of Glu precipitation with PEI as an additive is investigated thereafter. The combination of stopped flow and small angle scattering demonstrates that the initially formed liquid precursors pass through an alteration of growth and coalescence. Combined with results from optical microscopy and scanning electron microscopy, the nucleation of nanoplatelets happens within each liquid precursor droplet, and nanoplatelets reorient themselves and self-organize into a radial orientation in the crystalline microspheres. The recipe was then extended to the precipitation of organics in other oppositely charged amino acid-polyelectrolyte systems. After the success in preparing hierarchical microspheres in solution, the similar recipe can be extended to the preparation of patterned thin films on substrate. By dipping a quaternary DL-Lys·HCl (Lys)-polyacrylic acid (PAA)-water-EtOH dispersion on a hydrophilic slide, the fast evaporation process of the volatile solvent EtOH is responsible for the homogeneous nucleation of NPs. Then, the following complete evaporation causes the mesocrystallization of a continuous spherulitic thin film along the receding line of the liquid, which again transforms into a mesocrystalline thin film. Furthermore, annealing is used to optimize the property of mesocrystalline thin films. As evaporation is a non-equilibrium process, it can be used to tune the kinetics of crystallization. Therefore, hierarchical or periodical thin films are obtainable by starting the evaporation from microspheres recrystallization, obtaining mesocrystalline thin films with 4 hierarchy levels. The results reveal that evaporation provides an easy but effective way for the formation of patterned structures via the positioning of NPs after their fast nucleation, resulting in different kinds of patterns by controlling the concentration of NPs, solvent evaporation rate, and other physical forces. Non-classical crystallization is not limited to crystallizations with polymeric additives. We also observed the nucleation and growth of a new molecular layer on the growing DL-Glu·H2O crystals from a supersaturated mother liquor by using an in-situ atomic force microscopy (AFM), where the nucleation and growth of a molecular layer proceed via amorphous nanoparticle (NP) attachment and relaxation process before the observation of the growth of a newly formed molecular layer. NP attachment to the crystal surface is too fast to observe by using in-situ AFM. The height shrinkage of NPs, combined to the structural transformation from 3D amorphous NPs to 2D crystalline layer, is observed during the relaxation process. The nucleation and growth of a newly formed molecular layer from NP relaxation is contradictory to the classical nucleation theory, which hypothesizes that nuclei show the same crystallographic properties as a bulk crystal. The formation of a molecular layer by NP attachment and relaxation rather than attachment of single molecules provides a different picture from the currently held classical nucleation and growth theory regarding the growth of single crystals from solution.},
  language  = {de}
}