@article{AlNajiSchlaadAntonietti2020, author = {Al-Naji, Majd and Schlaad, Helmut and Antonietti, Markus}, title = {New (and old) monomers from biorefineries to make polymer chemistry more sustainable}, series = {Macromolecular rapid communications}, volume = {42}, journal = {Macromolecular rapid communications}, number = {3}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1022-1336}, doi = {10.1002/marc.202000485}, pages = {11}, year = {2020}, abstract = {This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., alpha-methylene-gamma-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers.}, language = {en} } @misc{AlNajiSchlaadAntonietti2020, author = {Al-Naji, Majd and Schlaad, Helmut and Antonietti, Markus}, title = {New (and old) monomers from biorefineries to make polymer chemistry more sustainable}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {3}, issn = {1866-8372}, doi = {10.25932/publishup-57061}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-570614}, pages = {13}, year = {2020}, abstract = {This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., alpha-methylene-gamma-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers.}, language = {en} } @article{BaldSolov'yovMasonetal.2020, author = {Bald, Ilko and Solov'yov, Ilia A. and Mason, Nigel J. and Solov'yov, Andrey V.}, title = {Special issue}, series = {The European physical journal. D, Atomic, molecular, optical and plasma physics}, volume = {74}, journal = {The European physical journal. D, Atomic, molecular, optical and plasma physics}, number = {4}, publisher = {Springer}, address = {Berlin}, issn = {1434-6060}, doi = {10.1140/epjd/e2020-10134-4}, pages = {75 -- 82}, year = {2020}, abstract = {The structure, formation and dynamics of both animate and inanimate matter on the nanoscale are a highly interdisciplinary field of rapidly emerging research engaging a broad community encompassing experimentalists, theorists, and technologists. It is relevant for a large variety of molecular and nanosystems of different origin and composition and concerns numerous phenomena originating from physics, chemistry, biology, or materials science. This Topical Issue presents a collection of original research papers devoted to different aspects of structure and dynamics on the nanoscale. Some of the contributions discuss specific applications of the research results in several modern technologies and in next generation medicine. Most of the works of this topical issue were reported at the Fifth International Conference on Dynamics of Systems on the Nanoscale (DySoN) - the premier forum for the presentation of cutting-edge research in this field that was held in Potsdam, Germany in October of 2018.}, language = {en} } @article{BalischewskiBehrensZehbeetal.2020, author = {Balischewski, Christian and Behrens, Karsten and Zehbe, Kerstin and G{\"u}nter, Christina and Mies, Stefan and Sperlich, Eric and Kelling, Alexandra and Taubert, Andreas}, title = {Ionic liquids with more than one metal}, series = {Chemistry - a European journal}, volume = {26}, journal = {Chemistry - a European journal}, number = {72}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0947-6539}, doi = {10.1002/chem.202003097}, pages = {17504 -- 17513}, year = {2020}, abstract = {Thirteen N-butylpyridinium salts, including three monometallic [C4Py](2)[MCl4], nine bimetallic [C4Py](2)[(M1-xMxCl4)-M-a-Cl-b] and one trimetallic compound [C4Py](2)[(M1-y-zMyMz (c) Cl4)-M-a-M-b] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 degrees C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10(-4) and 10(-8) S cm(-1). Some Cu-based ILs reach conductivities of 10(-2) S cm(-1), which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47x10(-1) S cm(-1) at 70 degrees C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.}, language = {en} } @article{BalkBehlLendlein2020, author = {Balk, Maria and Behl, Marc and Lendlein, Andreas}, title = {Actuators based on oligo[(epsilon-caprolactone)-co-glycolide] with accelerated hydrolytic degradation}, series = {MRS advances : a journal of the Materials Research Society (MRS)}, volume = {5}, journal = {MRS advances : a journal of the Materials Research Society (MRS)}, number = {12-13}, publisher = {Cambridge University Press}, address = {New York, NY}, issn = {2059-8521}, doi = {10.1557/adv.2019.447}, pages = {655 -- 666}, year = {2020}, abstract = {Polyester-based shape-memory polymer actuators are multifunctional materials providing reversible macroscopic shape shifts as well as hydrolytic degradability. Here, the function-function interdependencies (between shape shifts and degradation behaviour) will determine actuation performance and its life time. In this work, glycolide units were incorporated in poly(epsilon-caprolactone) based actuator materials in order to achieve an accelerated hydrolytic degradation and to explore the function-function relationship. Three different oligo[(epsilon-caprolactone)-co-glycolide] copolymers (OCGs) with similar molecular weights (10.5 +/- 0.5 kg center dot mol(-1)) including a glycolide content of 8, 16, and 26 mol\% (ratio 1:1:1 wt\%) terminated with methacrylated moieties were crosslinked. The obtained actuators provided a broad melting transition in the range from 27 to 44 degrees C. The hydrolytic degradation of programmed OCG actuators (200\% of elongation) resulted in a reduction of sample mass to 51 wt\% within 21 days at pH = 7.4 and 40 degrees C. Degradation results in a decrease of T-m associated to the actuating units and increasing T-m associated to the skeleton forming units. The actuation capability decreased almost linear as function of time. After 11 days of hydrolytic degradation the shape-memory functionality was lost. Accordingly, a fast degradation behaviour as required, e.g., for actuator materials intended as implant material can be realized.}, language = {en} } @article{BastianNacakRoddatisetal.2020, author = {Bastian, Philipp U. and Nacak, Selma and Roddatis, Vladimir and Kumke, Michael Uwe}, title = {Tracking the motion of lanthanide ions within core-shell-shell NaYF4 nanocrystals via resonance energy transfer}, series = {The journal of physical chemistry : C}, volume = {124}, journal = {The journal of physical chemistry : C}, number = {20}, publisher = {American Chemical Society}, address = {Washington, DC}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.0c02588}, pages = {11229 -- 11238}, year = {2020}, abstract = {Lanthanide resonance energy transfer (LRET) was used to investigate the motion of dopant ions during the synthesis of core-shell-shell-nanocrystals (NCs) that are frequently used as frequency upconversion materials. Reaction conditions (temperature, solvent) as well as lattice composition and precursors were adapted from a typical hydrothermal synthesis approach used to obtain upconversion nanoparticles (UCNPs). Instead of adding the lanthanide ions Yb3+/Er3+ as the sensitizer/activator couple, Eu3+/Nd3+ as the donor/acceptor were added as the LRET pair to the outer shell (Eu-3) and the core (Nd-3). By tailoring the thickness of the insulation shell ("middle shell"), the expected distance between the donor and the acceptor was increased beyond 2 R-0, a distance for which no LRET is expected. The successful synthesis of core- shell-shell NCs with different thicknesses of the insulation layer was demonstrated by high-resolution transmission electron microscopy measurement. The incorporation of the Eu3+ ions into the NaYF4 lattice was investigated by high-resolution time-resolved luminescence measurements. Two major Eu3+ species (bulk and surface) were found. This was supported by steady-state as well as time-resolved luminescence data. Based on the luminescence decay kinetics, the intermixing of lanthanides during synthesis of core- shell UCNPs was evaluated. The energy transfer between Eu3+ (donor) and Nd3+ (acceptor) ions was exploited to quantify the motion of the dopant ions. This investigation reveals the migration of Ln(3+) ions between different compatiments in core-shell NCs and affects the concept of using core-shell architectures to increase the efficiency of UCNPs. In order to obtain well-separated core and shell structures with different dopants, alternative concepts are needed.}, language = {en} } @article{BastianYudeGuerenuKurganovaetal.2020, author = {Bastian, Philipp U. and Yu, Leixiao and de Guere{\~n}u Kurganova, Anna Lopez and Haag, Rainer and Kumke, Michael Uwe}, title = {Bioinspired confinement of upconversion nanoparticles for improved performance in aqueous solution}, series = {The journal of physical chemistry : C, Nanomaterials and interfaces}, volume = {124}, journal = {The journal of physical chemistry : C, Nanomaterials and interfaces}, number = {52}, publisher = {American Chemical Society}, address = {Washington, DC}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.0c09798}, pages = {28623 -- 28635}, year = {2020}, abstract = {The resonance energy transfer (RET) from NaYF4:Yb,Er upconverting nanoparticles (UNCPs) to a dye (5-carboxytetramethylrhodamine (TAMRA)) was investigated by photoluminescence experiments and microscale thermophoresis (MST). The dye was excited via RET from the UCNPs which was excited in the near-infrared (NIR). The change of the dye diffusion speed (free vs coupled) was investigated by MST. RET shows significant changes in the decay times of the dye as well as of the UCNPs. MST reveals significant changes in the diffusion speed. A unique amphiphilic coating polymer (customized mussel protein (CMP) polymer) for UCNP surface coating was used, which mimics blood protein adsorption and mussel food protein adhesion to transfer the UCNP into the aqueous phase and to allow surface functionalization. The CMP provides very good water dispersibility to the UCNPs and minimizes ligand exchange and subsequent UCNP aging reactions because of the interlinkage of the CMP on the UCNP surface. Moreover, CMP provides N-3-functional groups for dick chemistry-based functionalization demonstrated with the dye 5-carboxytetramethylrhodamine (TAMRA). This establishes the principle coupling scheme for suitable biomarkers such as antibodies. The CMP provides very stable aqueous UCNP dispersions that are storable up to 3 years in a fridge at 5 degrees C without dissolution or coagulation. The outstanding properties of CMP in shielding the UCNP from unwanted solvent effects is reflected in the distinct increase of the photoluminescence decay times after UCNP functionalization. The UCNP-to-TAMRA energy transfer is also spectroscopically investigated at low temperatures (4-200 K), revealing that one of the two green Er(III) emission bands contributes the major part to the energy transfer. The TAMRA fluorescence decay time increases by a factor of 9500 from 2.28 ns up to 22 mu s due to radiationless energy transfer from the UCNP after NIR excitation of the latter. This underlines the unique properties of CMP as a versatile capping ligand for distinctly improving the UCNPs' performance in aqueous solutions, for coupling of biomolecules, and for applications for in vitro and in vivo experiments using UCNPs as optical probes in life science applications.}, language = {en} } @article{BechmannBald2020, author = {Bechmann, Wolfgang and Bald, Ilko}, title = {Wechselwirkung zwischen elektromagnetischer Strahlung und Stoff - Grundlagen der Spektroskopie}, edition = {7. Auflage}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-62033-5}, doi = {10.1007/978-3-662-62034-2_4}, pages = {303 -- 457}, year = {2020}, abstract = {Unter elektromagnetischer Strahlung versteht man eine Welle aus gekoppelten elektrischen und magnetischen Feldern. Stoffe, die dieser Welle ausgesetzt sind, k{\"o}nnen von ihr Energie aufnehmen. Dabei wechseln die Stoffe zwischen ihrem, der jeweiligen Temperatur entsprechenden energetischen Grundzustand G und einem energetisch angeregten Zustand A* (Abbildung 4.1).}, language = {de} } @article{BechmannBald2020, author = {Bechmann, Wolfgang and Bald, Ilko}, title = {Reaktionskinetik}, series = {Einstieg in die Physikalische Chemie f{\"u}r Naturwissenschaftler}, journal = {Einstieg in die Physikalische Chemie f{\"u}r Naturwissenschaftler}, edition = {7. Auflage}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-62033-5}, doi = {10.1007/978-3-662-62034-2_2}, pages = {141 -- 220}, year = {2020}, abstract = {Bei der Untersuchung chemischer Reaktionen interessiert zun{\"a}chst, welche Reaktionsprodukte aus gegebenen Ausgangsstoffen gebildet werden k{\"o}nnen. Wichtig sind weiterhin Angaben zum m{\"o}glichen Grad der Umsetzung der Ausgangsstoffe und zur Energiebilanz einer Reaktion. Damit sind aber noch keine Aussagen {\"u}ber den zeitlichen Ablauf der Stoffumwandlung getroffen.}, language = {de} } @article{BechmannBald2020, author = {Bechmann, Wolfgang and Bald, Ilko}, title = {Elektrochemie}, series = {Einstieg in die Physikalische Chemie f{\"u}r Naturwissenschaftler}, journal = {Einstieg in die Physikalische Chemie f{\"u}r Naturwissenschaftler}, edition = {7. Auflage}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-62033-5}, doi = {10.1007/978-3-662-62034-2_3}, pages = {221 -- 301}, year = {2020}, abstract = {Es war eine Reihe experimenteller Befunde, die zur Entwicklung dieses Teilgebietes der Physikalischen Chemie und auch zu seiner Unterteilung f{\"u}hrte. Die Liste der Namen, die mit den Experimenten verkn{\"u}pft sind, liest sich nicht nur wie eine Zeittafel der Geschichte der Elektrizit{\"a}tslehre, sondern auch der Physikalischen Chemie selbst.}, language = {de} }