@article{GuRisseLuetal.2019, author = {Gu, Sasa and Risse, Sebastian and Lu, Yan and Ballauff, Matthias}, title = {Mechanism of the oxidation of 3,3′,5,5′-tetramethylbenzidine catalyzed by peroxidase-like Pt nanoparticles immobilized in spherical polyelectrolyte brushes}, series = {ChemPhysChem}, volume = {21}, journal = {ChemPhysChem}, number = {5}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1439-4235}, doi = {10.1002/cphc.201901087}, pages = {450 -- 458}, year = {2019}, abstract = {Experimental and kinetic modelling studies are presented to investigate the mechanism of 3,3 ',5,5 '-tetramethylbenzidine (TMB) oxidation by hydrogen peroxide (H2O2) catalyzed by peroxidase-like Pt nanoparticles immobilized in spherical polyelectrolyte brushes (SPB-Pt). Due to the high stability of SPB-Pt colloidal, this reaction can be monitored precisely in situ by UV/VIS spectroscopy. The time-dependent concentration of the blue-colored oxidation product of TMB expressed by different kinetic models was used to simulate the experimental data by a genetic fitting algorithm. After falsifying the models with abundant experimental data, it is found that both H2O2 and TMB adsorb on the surface of Pt nanoparticles to react, indicating that the reaction follows the Langmuir-Hinshelwood mechanism. A true rate constant k, characterizing the rate-determining step of the reaction and which is independent on the amount of catalysts used, is obtained for the first time. Furthermore, it is found that the product adsorbes strongly on the surface of nanoparticles, thus inhibiting the reaction. The entire analysis provides a new perspective to study the catalytic mechanism and evaluate the catalytic activity of the peroxidase-like nanoparticles.}, language = {en} } @article{MachatschekLendlein2019, author = {Machatschek, Rainhard Gabriel and Lendlein, Andreas}, title = {Fundamental insights in PLGA degradation from thin film studies}, series = {Journal of controlled release : official journal of the Controlled Release Society and of the Japanese Society of Drug Delivery Systems}, volume = {319}, journal = {Journal of controlled release : official journal of the Controlled Release Society and of the Japanese Society of Drug Delivery Systems}, publisher = {Elsevier}, address = {New York}, issn = {0168-3659}, doi = {10.1016/j.jconrel.2019.12.044}, pages = {276 -- 284}, year = {2019}, abstract = {Poly(lactide-co-glycolide)s are commercially available degradable implant materials, which are typically selected based on specifications given by the manufacturer, one of which is their molecular weight. Here, we address the question whether variations in the chain length and their distribution affect the degradation behavior of Poly[(rac-lactide)-co-glycolide]s (PDLLGA). The hydrolysis was studied in ultrathin films at the air-water interface in order to rule out any morphological effects. We found that both for purely hydrolytic degradation as well as under enzymatic catalysis, the molecular weight has very little effect on the overall degradation kinetics of PDLLGAs. The quantitative analysis suggested a random scission mechanism. The monolayer experiments showed that an acidic micro-pH does not accelerate the degradation of PDLLGAs, in contrast to alkaline conditions. The degradation experiments were combined with interfacial rheology measurements, which showed a drastic decrease of the viscosity at little mass loss. The extrapolated molecular weight behaved similar to the viscosity, dropping to a value near to the solubility limit of PDLLGA oligomers before mass loss set in. This observation suggests a solubility controlled degradation of PDLLGA. Conclusively, the molecular weight affects the degradation of PDLLGA devices mostly in indirect ways, e.g. by determining their morphology and porosity during fabrication. Our study demonstrates the relevance of the presented Langmuir degradation method for the design of controlled release systems.}, language = {en} } @article{MinkMcHardyBresseletal.2019, author = {Mink, Albert and McHardy, Christopher and Bressel, Lena and Rauh, Cornelia and Krause, Mathias J.}, title = {Radiative transfer lattice Boltzmann methods}, series = {Journal of quantitative spectroscopy \& radiative transfer}, volume = {243}, journal = {Journal of quantitative spectroscopy \& radiative transfer}, publisher = {Pergamon Press}, address = {Oxford}, issn = {0022-4073}, doi = {10.1016/j.jqsrt.2019.106810}, year = {2019}, abstract = {The numerical prediction of radiative transport is a challenging task due to the complexity of the radiative transport equation. We apply the lattice Boltzmann method (LBM), originally developed for fluid flow problems, to solve the radiative transport in volume. One model (meso RTLBM) is derived directly from a discretization of the radiative transport equation, yielding in a precise but numerical costly scheme. The second model (macro RTLBM) solves the Helmholtz equation, which is a proper approximation for highly scattering volumes. Both numerical algorithms are validated against Monte-Carlo data for a set of 35 optical parameters, which correspond to radiative transport ranging from ballistic to diffuse regimes. Together with a set of four benchmark simulations, the comprehensive validation concludes the overall quality and detects asymptotic trends for radiative transport LBM. Furthermore, an accuracy map is presented, which summarizes the error for all parameters. This graph allows to determine the validity range for both radiative transport LBM at a glance. Finally, comprehensive guidelines are formulated to facilitate the choice of the radiative transport LBM model.}, language = {en} } @article{KleinpeterKoch2019, author = {Kleinpeter, Erich and Koch, Andreas}, title = {The 13 C chemical shift and the anisotropy effect of the carbene electron-deficient centre}, series = {Magnetic resonance in chemistry}, volume = {58}, journal = {Magnetic resonance in chemistry}, number = {3}, publisher = {Wiley}, address = {Hoboken}, issn = {0749-1581}, doi = {10.1002/mrc.4979}, pages = {280 -- 292}, year = {2019}, abstract = {Both the C-13 chemical shift and the calculated anisotropy effect (spatial magnetic properties) of the electron-deficient centre of stable, crystalline, and structurally characterized carbenes have been employed to unequivocally characterize potential resonance contributors to the present mesomerism (carbene, ylide, betaine, and zwitter ion) and to determine quantitatively the electron deficiency of the corresponding carbene carbon atom. Prior to that, both structures and C-13 chemical shifts were calculated and compared with the experimental delta(C-13)/ppm values and geometry parameters (as a quality criterion for obtained structures).}, language = {en} } @article{NieWangXuetal.2019, author = {Nie, Yan and Wang, Weiwei and Xu, Xun and Zou, Jie and Bhuvanesh, Thanga and Schulz, Burkhard and Ma, Nan and Lendlein, Andreas}, title = {Enhancement of human induced pluripotent stem cells adhesion through multilayer laminin coating}, series = {Clinical hemorheology and microcirculation : blood flow and vessels}, volume = {70}, journal = {Clinical hemorheology and microcirculation : blood flow and vessels}, number = {4}, publisher = {IOS Press}, address = {Amsterdam}, issn = {1386-0291}, doi = {10.3233/CH-189318}, pages = {531 -- 542}, year = {2019}, abstract = {Bioengineered cell substrates are a highly promising tool to govern the differentiation of stem cells in vitro and to modulate the cellular behavior in vivo. While this technology works fine for adult stem cells, the cultivation of human induced pluripotent stem cells (hiPSCs) is challenging as these cells typically show poor attachment on the bioengineered substrates, which among other effects causes substantial cell death. Thus, very limited types of surfaces have been demonstrated suitable for hiPSC cultures. The multilayer coating approach that renders the surface with diverse chemical compositions, architectures, and functions can be used to improve the adhesion of hiPSCs on the bioengineered substrates. We hypothesized that a multilayer formation based on the attraction of molecules with opposite charges could functionalize the polystyrene (PS) substrates to improve the adhesion of hiPSCs. Polymeric substrates were stepwise coated, first with dopamine to form a polydopamine (PDA) layer, second with polylysine and last with Laminin-521. The multilayer formation resulted in the variation of hydrophilicity and chemical functionality of the surfaces. Hydrophilicity was detected using captive bubble method and the amount of primary and secondary amines on the surface was quantified by fluorescent staining. The PDA layer effectively immobilized the upper layers and thereby improved the attachment of hiPSCs. Cell adhesion was enhanced on the surfaces coated with multilayers, as compared to those without PDA and/or polylysine. Moreover, hiPSCs spread well over this multilayer laminin substrate. These cells maintained their proliferation capacity and differentiation potential. The multilayer coating strategy is a promising attempt for engineering polymer-based substrates for the cultivation of hiPSCs and of interest for expanding the application scope of hiPSCs.}, language = {en} } @article{BreternitzLehmannBarnettetal.2019, author = {Breternitz, Joachim and Lehmann, Frederike and Barnett, Sarah A. and Nowell, Harriott and Schorr, Susan}, title = {Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizit{\"a}t in CH3NH3PbI3}, series = {Angewandte Chemie}, volume = {132}, journal = {Angewandte Chemie}, number = {1}, publisher = {John Wiley \& Sons, Inc.}, address = {New Jersey}, pages = {5}, year = {2019}, abstract = {Ihre außergew{\"o}hnlich hohen Konversionseffizienzen von {\"u}ber 20 \% und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten f{\"u}r alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergew{\"o}hnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizit{\"a}t als m{\"o}gliche Erkl{\"a}rung in den Fokus ger{\"u}ckt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erkl{\"a}rung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. W{\"a}hrend das Molek{\"u}lkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erkl{\"a}rung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor.}, language = {de} } @article{BreternitzLehmannBarnettetal.2019, author = {Breternitz, Joachim and Lehmann, Frederike and Barnett, Sarah A. and Nowell, Harriott and Schorr, Susan}, title = {Role of the Iodide-methylammonium interaction in the ferroelectricity of CH3NH3PbI3}, series = {Angewandte Chemie - international edition}, volume = {59}, journal = {Angewandte Chemie - international edition}, number = {1}, publisher = {John Wiley \& Sons, Inc.}, address = {New Jersey}, pages = {5}, year = {2019}, abstract = {Excellent conversion efficiencies of over 20\% and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH3NH3PbI3 being an archetypal compound. The question why CH3NH3PbI3 has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non-centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long-range level. Although the molecular cation CH3NH3+ is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions.}, language = {en} } @article{UnuabonahNoeskeWeberetal.2019, author = {Unuabonah, Emmanuel and N{\"o}ske, Robert and Weber, Jens and G{\"u}nter, Christina and Taubert, Andreas}, title = {New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water}, series = {Beilstein journal of nanotechnology}, volume = {10}, journal = {Beilstein journal of nanotechnology}, publisher = {Beilstein-Institut zur F{\"o}rderung der Chemischen Wissenschaften}, address = {Frankfurt, Main}, issn = {2190-4286}, doi = {10.3762/bjnano.10.11}, pages = {119 -- 131}, year = {2019}, abstract = {A new micro/mesoporous hybrid clay nanocomposite prepared from kaolinite clay, Carica papaya seeds, and ZnCl2 via calcination in an inert atmosphere is presented. Regardless of the synthesis temperature, the specific surface area of the nanocomposite material is between approximate to 150 and 300 m(2)/g. The material contains both micro- and mesopores in roughly equal amounts. X-ray diffraction, infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy suggest the formation of several new bonds in the materials upon reaction of the precursors, thus confirming the formation of a new hybrid material. Thermogravimetric analysis/differential thermal analysis and elemental analysis confirm the presence of carbonaceous matter. The new composite is stable up to 900 degrees C and is an efficient adsorbent for the removal of a water micropollutant, 4-nitrophenol, and a pathogen, E. coli, from an aqueous medium, suggesting applications in water remediation are feasible.}, language = {en} } @article{SaretiaMachatschekSchulzetal.2019, author = {Saretia, Shivam and Machatschek, Rainhard Gabriel and Schulz, Burkhard and Lendlein, Andreas}, title = {Reversible 2D networks of oligo(epsilon-caprolactone) at the air-water interface}, series = {Biomedical Materials}, volume = {14}, journal = {Biomedical Materials}, number = {3}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1748-6041}, doi = {10.1088/1748-605X/ab0cef}, pages = {10}, year = {2019}, abstract = {Hydroxyl terminated oligo(epsilon-caprolactone) (OCL) monolayers were reversibly cross-linked forming two dimensional networks (2D) at the air-water interface. The equilibrium reaction with glyoxal as the cross-linker is pH-sensitive. Pronounced contraction in the area of the prepared 2DOCL films in dependence of surface pressure and time revealed the process of the reaction. Cross-linking inhibited crystallization and retarded enzymatic degradation of the OCLfilm. Altering the subphase pH led to a cleavage of the covalent acetal cross-links. The reversibility of the covalent acetal cross-links was proved by observing an identical isotherm as non-cross-linked sample. Besides as model systems, these customizable reversible OCL2D networks are intended for use as pHresponsive drug delivery systems or functionalized cell culture substrates.}, language = {en} } @article{KhodeirErnouldBrassinneetal.2019, author = {Khodeir, Miriam and Ernould, Bruno and Brassinne, Jeremy and Ghiassinejad, Sina and Jia, He and Antoun, Sayed and Friebe, Christian and Schubert, Ulrich S. and Kochovski, Zdravko and Lu, Yan and Van Ruymbeke, Evelyne and Gohy, Jean-Francois}, title = {Synthesis and characterisation of redox hydrogels based on stable nitroxide radicals}, series = {Soft matter}, volume = {15}, journal = {Soft matter}, number = {31}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c9sm00905a}, pages = {6418 -- 6426}, year = {2019}, abstract = {The principle of encapsulation/release of a guest molecule from stimuli responsive hydrogels (SRHs) is mainly realised with pH, temperature or light stimuli. However, only a limited number of redox responsive hydrogels have been investigated so far. We report here the development of a SRH that can release its guest molecule upon a redox stimulus. To obtain this redox hydrogel, we have introduced into the hydrogel the 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) stable nitroxide radical, which can be reversibly oxidized into an oxoammonium cation (TEMPO+). Water solubility is provided by the presence of the (oligoethyleneglycol)methacrylate (OEGMA) comonomer. Electrochemical and mechanical characterization showed that those gels exhibit interesting physicochemical properties, making them very promising candidates for practical use in a wide range of applications.}, language = {en} }