@misc{EichSchmaelzlinLoehmannsroeben2013, author = {Eich, Susanne and Schm{\"a}lzlin, Elmar and L{\"o}hmannsr{\"o}ben, Hans-Gerd}, title = {Distributed fiber optical sensing of oxygen with optical time domain reflectometry}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1085}, issn = {1866-8372}, doi = {10.25932/publishup-47665}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476659}, pages = {16}, year = {2013}, abstract = {In many biological and environmental applications spatially resolved sensing of molecular oxygen is desirable. A powerful tool for distributed measurements is optical time domain reflectometry (OTDR) which is often used in the field of telecommunications. We combine this technique with a novel optical oxygen sensor dye, triangular-[4] phenylene (TP), immobilized in a polymer matrix. The TP luminescence decay time is 86 ns. The short decay time of the sensor dye is suitable to achieve a spatial resolution of some meters. In this paper we present the development and characterization of a reflectometer in the UV range of the electromagnetic spectrum as well as optical oxygen sensing with different fiber arrangements.}, language = {en} } @misc{WessigMatthes2013, author = {Wessig, Pablo and Matthes, Annika}, title = {Photochemical synthesis and properties of 1,6- and 1,8-Naphthalenophanes}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1042}, issn = {1866-8372}, doi = {10.25932/publishup-47667}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476675}, pages = {13}, year = {2013}, abstract = {Various 1,6- and 1,8-naphthalenophanes were synthesized by using the Photo-Dehydro-Diels-Alder (PDDA) reaction of bis-ynones. These compounds are easily accessible from omega-(3-iodophenyl)carboxylic acids in three steps. The obtained naphthalenophanes are axially chiral and the activation barrier for the atropisomerization could be determined in some cases by means of dynamic NMR (DNMR) and/or dynamic HPLC (DHPLC) experiments.}, language = {en} } @article{BullerLaschewskyWischerhoff2013, author = {Buller, Jens and Laschewsky, Andr{\´e} and Wischerhoff, Erik}, title = {Photoreactive oligoethylene glycol polymers - versatile compounds for surface modification by thin hydrogel films}, series = {Soft matter}, volume = {9}, journal = {Soft matter}, number = {3}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c2sm26879e}, pages = {929 -- 937}, year = {2013}, abstract = {Solid surfaces are modified using photo-crosslinkable copolymers based on oligo(ethylene glycol) methacrylate (OEGMA) bearing 2-(4-benzoylphenoxy) ethyl methacrylate (BPEM) as a photosensitive crosslinking unit. Thin films of about 100 nm are formed by spin-coating these a priori highly biocompatible copolymers onto silicon substrates. Subsequent UV-irradiation assures immobilization and crosslinking of the hydrogel films. Their stability is controlled by the number of crosslinker units per chain and the molar mass of the copolymers. The swelling of the hydrogel layers, as investigated by ellipsometry, can be tuned by the crosslinker content in the copolymer. If films are built from the ternary copolymers of OEGMA, BPEM and 2-(2-methoxyethoxy) ethyl methacrylate (MEO(2)MA), the hydrogel films exhibit a swelling/deswelling transition of the lower critical solution temperature (LCST) type. The observed thermally induced hydrogel collapse is fully reversible and the onset temperature of the transition can be tuned at will by the copolymer composition. Different from analogously prepared thermo-responsive hydrogel films of photocrosslinked poly(N-isopropylacrylamide), the swelling-deswelling transition occurs more gradually, but shows no hysteresis.}, language = {en} } @article{AdelsbergerGrilloKulkarnietal.2013, author = {Adelsberger, Joseph and Grillo, Isabelle and Kulkarni, Amit and Sharp, Melissa and Bivigou Koumba, Achille Mayelle and Laschewsky, Andr{\´e} and M{\"u}ller-Buschbaum, Peter and Papadakis, Christine M.}, title = {Kinetics of aggregation in micellar solutions of thermoresponsive triblock copolymers - influence of concentration, start and target temperatures}, series = {Soft matter}, volume = {9}, journal = {Soft matter}, number = {5}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c2sm27152d}, pages = {1685 -- 1699}, year = {2013}, abstract = {In aqueous solution, symmetric triblock copolymers with a thermoresponsive middle block and hydrophobic end blocks form flower-like core-shell micelles which collapse and aggregate upon heating through the cloud point (CP). The collapse of the micellar shell and the intermicellar aggregation are followed in situ and in real-time using time-resolved small-angle neutron scattering (SANS), while heating micellar solutions of a poly((styrene-d(8))-b-(N-isopropyl acrylamide)-b-(styrene-d(8))) triblock copolymer in D2O rapidly through their CP. The influence of polymer concentration as well as of the start and target temperatures is addressed. In all cases, the micellar collapse is very fast. The collapsed micelles immediately form small clusters which contain voids. They densify which slows down or even stops their growth. For low concentrations and target temperatures just above the CP, i.e. shallow temperature jumps, the subsequent growth of the clusters is described by diffusion-limited aggregation. In contrast, for higher concentrations and/or higher target temperatures, i.e. deep temperature jumps, intermicellar bridges dominate the growth. Eventually, in all cases, the clusters coagulate which results in macroscopic phase separation. For shallow temperature jumps, the cluster surfaces stay rough; whereas for deep temperature jumps, a concentration gradient develops at late stages. These results are important for the development of conditions for thermal switching in applications, e.g. for the use of thermoresponsive micellar systems for transport and delivery purposes.}, language = {en} } @article{WessigMatthes2013, author = {Wessig, Pablo and Matthes, Annika}, title = {Photochemical synthesis and properties of 1,6- and 1,8-Naphthalenophanes}, series = {Molecules}, volume = {18}, journal = {Molecules}, number = {1}, publisher = {MDPI}, address = {Basel}, issn = {1420-3049}, doi = {10.3390/molecules18011314}, pages = {1314 -- 1324}, year = {2013}, abstract = {Various 1,6- and 1,8-naphthalenophanes were synthesized by using the Photo-Dehydro-Diels-Alder (PDDA) reaction of bis-ynones. These compounds are easily accessible from omega-(3-iodophenyl)carboxylic acids in three steps. The obtained naphthalenophanes are axially chiral and the activation barrier for the atropisomerization could be determined in some cases by means of dynamic NMR (DNMR) and/or dynamic HPLC (DHPLC) experiments.}, language = {en} } @article{vonCzapiewskiKreyeMutluetal.2013, author = {von Czapiewski, Marc and Kreye, Oliver and Mutlu, Hatice and Meier, Michael A. R.}, title = {Cross-metathesis versus palladium-catalyzed C-H activation acetoxy ester functionalization of unsaturated fatty acid methyl esters}, series = {European journal of lipid science and technology}, volume = {115}, journal = {European journal of lipid science and technology}, number = {1}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {1438-7697}, doi = {10.1002/ejlt.201200196}, pages = {76 -- 85}, year = {2013}, abstract = {Two synthetic approaches to functionalize plant oil derived platform chemicals were investigated. For this purpose, methyl 10-undecenoate, which can be obtained by pyrolysis of castor oil, was used in olefin cross-metathesis under neat conditions forming an unsaturated a,?-acetoxy ester. A catalyst screening with 11 different ruthenium-based metathesis catalysts was performed, revealing that well-suited catalysts allow for full conversion and very good cross-metathesis selectivity at a loading of only 0.5?mol\%. An alternative possibility to the aforementioned synthetic method is a palladium-catalyzed reaction of methyl 10-undecenoate with acetic acid in the presence of dimethyl sulfoxide. Here, the formation of linear and branched unsaturated acetoxy esters as well as a ketone was observed. The conversion as well as the selectivity of this procedure was studied under different reaction conditions and compared to the cross-metathesis results. Based on the successful functionalization of methyl 10-undecenoate, methyl oleate was investigated in this palladium-catalyzed C?H activation reaction. Due to the lower reactivity of the internal double bond the desired acetoxy ester was only obtained in moderate conversion in this case. In summary, this study clearly shows that palladium-catalyzed functionalization of unsaturated fatty compounds via C?H activation is an attractive alternative to the well-established olefin cross-metathesis procedure.}, language = {en} } @article{HerderUtechtManickeetal.2013, author = {Herder, Martin and Utecht, Manuel Martin and Manicke, Nicole and Grubert, Lutz and P{\"a}tzel, Michael and Saalfrank, Peter and Hecht, Stefan}, title = {Switching with orthogonal stimuli electrochemical ring-closure and photochemical ring-opening of bis(thiazolyl) maleimides}, series = {Chemical science}, volume = {4}, journal = {Chemical science}, number = {3}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2041-6520}, doi = {10.1039/c2sc21681g}, pages = {1028 -- 1040}, year = {2013}, abstract = {The photochemistry as well as electrochemistry of novel donor-acceptor bis(morpholinothiazolyl)maleimides has been investigated. Proper substitution of these diarylethene-type molecular switches leads to the unique situation in which their ring-closure can only be accomplished electrochemically, while ring-opening can only be achieved photochemically. Hence, these switches operate with orthogonal stimuli, i.e. redox potential and light, respectively. The switch system could be optimized by introducing trifluoromethyl groups at the reactive carbon atoms in order to avoid by-product formation during oxidative ring closure. Both photochemical and electrochemical pathways were investigated for methylated, trifluoromethylated, and nonsymmetrical bis(morpholinothiazolyl) maleimides as well as the bis(morpholinothiazolyl) cyclopentene reference compound. With the aid of the nonsymmetrical "mixed" derivative, the mechanism of electrochemically driven ring closure could be elucidated and seems to proceed via a dicationic intermediate generated by two-fold oxidation. All experimental work has been complemented by density functional theory that provides detailed insights into the thermodynamics of the ring-open and closed forms, the nature of their excited states, and the reactivity of their neutral as well as ionized species in different electronic configurations. The particular diarylethene systems described herein could serve in multifunctional (logic) devices operated by different stimuli (inputs) and may pave the way to converting light into electrical energy via photoinduced "pumping" of redox-active meta-stable states.}, language = {en} } @article{TomczykSobolewskaNagyetal.2013, author = {Tomczyk, Jaroslaw and Sobolewska, Anna and Nagy, Zsuzsanna T. and Guillon, Daniel and Donnio, Bertrand and Stumpe, Joachim}, title = {Photo- and thermal-processing of azobenzene-containing star-shaped liquid crystals}, series = {Journal of materials chemistry : C, Materials for optical and electronic devices}, volume = {1}, journal = {Journal of materials chemistry : C, Materials for optical and electronic devices}, number = {5}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2050-7526}, doi = {10.1039/c2tc00627h}, pages = {924 -- 932}, year = {2013}, abstract = {A new class of star-shaped, liquid crystalline, low-molecular weight compounds functionalized with photochromic azobenzene and mesogenic groups was investigated in terms of light-induced anisotropy. The behaviour of the materials under the action of light with simultaneous or subsequent thermal treatment was examined with respect to the induction of anisotropy. The unconventional UV light treatment prior to the irradiation with linearly polarized light allowed induction of very high values of anisotropy (D = 0.77) at room temperature. Moreover, the simultaneous action of light and temperature led to the induction of higher values of dichroism in comparison with anisotropy generated by the standard procedure. Subsequent thermal treatment led to dewetting and the formation of 3D macroscopic stripe- and dome-like structures for one of the investigated compounds. Despite photoinduction of anisotropy by a single beam, the formation of polarization and surface relief gratings by two-beam interference pattern was also investigated.}, language = {en} } @article{ThielZehbeRoeseretal.2013, author = {Thiel, Kerstin and Zehbe, Rolf and R{\"o}ser, Jerome and Strauch, Peter and Enthaler, Stephan and Thomas, Arne}, title = {A polymer analogous reaction for the formation of imidazolium and NHC based porous polymer networks}, series = {Polymer Chemistry}, volume = {4}, journal = {Polymer Chemistry}, number = {6}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1759-9954}, doi = {10.1039/c2py20947k}, pages = {1848 -- 1856}, year = {2013}, abstract = {A polymer analogous reaction was carried out to generate a porous polymeric network with N-heterocyclic carbenes (NHC) in the polymer backbone. Using a stepwise approach, first a polyimine network is formed by polymerization of the tetrafunctional amine tetrakis(4-aminophenyl)methane. This polyimine network is converted in the second step into polyimidazolium chloride and finally to a polyNHC network. Furthermore a porous Cu(II)-coordinated polyNHC network can be generated. Supercritical drying generates polymer networks with high permanent surface areas and porosities which can be applied for different catalytic reactions. The catalytic properties were demonstrated for example in the activation of CO2 or in the deoxygenation of sulfoxides to the corresponding sulfides.}, language = {en} } @article{ChechkinZaidLomholtetal.2013, author = {Chechkin, Aleksei V. and Zaid, I. M. and Lomholt, M. A. and Sokolov, Igor M. and Metzler, Ralf}, title = {Bulk-mediated surface diffusion on a cylinder in the fast exchange limit}, series = {Mathematical modelling of natural phenomena}, volume = {8}, journal = {Mathematical modelling of natural phenomena}, number = {2}, publisher = {EDP Sciences}, address = {Les Ulis}, issn = {0973-5348}, doi = {10.1051/mmnp/20138208}, pages = {114 -- 126}, year = {2013}, abstract = {In various biological systems and small scale technological applications particles transiently bind to a cylindrical surface. Upon unbinding the particles diffuse in the vicinal bulk before rebinding to the surface. Such bulk-mediated excursions give rise to an effective surface translation, for which we here derive and discuss the dynamic equations, including additional surface diffusion. We discuss the time evolution of the number of surface-bound particles, the effective surface mean squared displacement, and the surface propagator. In particular, we observe sub- and superdiffusive regimes. A plateau of the surface mean-squared displacement reflects a stalling of the surface diffusion at longer times. Finally, the corresponding first passage problem for the cylindrical geometry is analysed.}, language = {en} }