@misc{AgarwalMarwanMaheswaranetal.2020, author = {Agarwal, Ankit and Marwan, Norbert and Maheswaran, Rathinasamy and {\"O}zt{\"u}rk, Ugur and Kurths, J{\"u}rgen and Merz, Bruno}, title = {Optimal design of hydrometric station networks based on complex network analysis}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {951}, issn = {1866-8372}, doi = {10.25932/publishup-47100}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471006}, pages = {19}, year = {2020}, abstract = {Hydrometric networks play a vital role in providing information for decision-making in water resource management. They should be set up optimally to provide as much information as possible that is as accurate as possible and, at the same time, be cost-effective. Although the design of hydrometric networks is a well-identified problem in hydrometeorology and has received considerable attention, there is still scope for further advancement. In this study, we use complex network analysis, defined as a collection of nodes interconnected by links, to propose a new measure that identifies critical nodes of station networks. The approach can support the design and redesign of hydrometric station networks. The science of complex networks is a relatively young field and has gained significant momentum over the last few years in different areas such as brain networks, social networks, technological networks, or climate networks. The identification of influential nodes in complex networks is an important field of research. We propose a new node-ranking measure - the weighted degree-betweenness (WDB) measure - to evaluate the importance of nodes in a network. It is compared to previously proposed measures used on synthetic sample networks and then applied to a real-world rain gauge network comprising 1229 stations across Germany to demonstrate its applicability. The proposed measure is evaluated using the decline rate of the network efficiency and the kriging error. The results suggest that WDB effectively quantifies the importance of rain gauges, although the benefits of the method need to be investigated in more detail.}, language = {en} } @phdthesis{Veh2019, author = {Veh, Georg}, title = {Outburst floods from moraine-dammed lakes in the Himalayas}, doi = {10.25932/publishup-43607}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436071}, school = {Universit{\"a}t Potsdam}, pages = {124}, year = {2019}, abstract = {The Himalayas are a region that is most dependent, but also frequently prone to hazards from changing meltwater resources. This mountain belt hosts the highest mountain peaks on earth, has the largest reserve of ice outside the polar regions, and is home to a rapidly growing population in recent decades. One source of hazard has attracted scientific research in particular in the past two decades: glacial lake outburst floods (GLOFs) occurred rarely, but mostly with fatal and catastrophic consequences for downstream communities and infrastructure. Such GLOFs can suddenly release several million cubic meters of water from naturally impounded meltwater lakes. Glacial lakes have grown in number and size by ongoing glacial mass losses in the Himalayas. Theory holds that enhanced meltwater production may increase GLOF frequency, but has never been tested so far. The key challenge to test this notion are the high altitudes of >4000 m, at which lakes occur, making field work impractical. Moreover, flood waves can attenuate rapidly in mountain channels downstream, so that many GLOFs have likely gone unnoticed in past decades. Our knowledge on GLOFs is hence likely biased towards larger, destructive cases, which challenges a detailed quantification of their frequency and their response to atmospheric warming. Robustly quantifying the magnitude and frequency of GLOFs is essential for risk assessment and management along mountain rivers, not least to implement their return periods in building design codes. Motivated by this limited knowledge of GLOF frequency and hazard, I developed an algorithm that efficiently detects GLOFs from satellite images. In essence, this algorithm classifies land cover in 30 years (~1988-2017) of continuously recorded Landsat images over the Himalayas, and calculates likelihoods for rapidly shrinking water bodies in the stack of land cover images. I visually assessed such detected tell-tale sites for sediment fans in the river channel downstream, a second key diagnostic of GLOFs. Rigorous tests and validation with known cases from roughly 10\% of the Himalayas suggested that this algorithm is robust against frequent image noise, and hence capable to identify previously unknown GLOFs. Extending the search radius to the entire Himalayan mountain range revealed some 22 newly detected GLOFs. I thus more than doubled the existing GLOF count from 16 previously known cases since 1988, and found a dominant cluster of GLOFs in the Central and Eastern Himalayas (Bhutan and Eastern Nepal), compared to the rarer affected ranges in the North. Yet, the total of 38 GLOFs showed no change in the annual frequency, so that the activity of GLOFs per unit glacial lake area has decreased in the past 30 years. I discussed possible drivers for this finding, but left a further attribution to distinct GLOF-triggering mechanisms open to future research. This updated GLOF frequency was the key input for assessing GLOF hazard for the entire Himalayan mountain belt and several subregions. I used standard definitions in flood hydrology, describing hazard as the annual exceedance probability of a given flood peak discharge [m3 s-1] or larger at the breach location. I coupled the empirical frequency of GLOFs per region to simulations of physically plausible peak discharges from all existing ~5,000 lakes in the Himalayas. Using an extreme-value model, I could hence calculate flood return periods. I found that the contemporary 100-year GLOF discharge (the flood level that is reached or exceeded on average once in 100 years) is 20,600+2,200/-2,300 m3 s-1 for the entire Himalayas. Given the spatial and temporal distribution of historic GLOFs, contemporary GLOF hazard is highest in the Eastern Himalayas, and lower for regions with rarer GLOF abundance. I also calculated GLOF hazard for some 9,500 overdeepenings, which could expose and fill with water, if all Himalayan glaciers have melted eventually. Assuming that the current GLOF rate remains unchanged, the 100-year GLOF discharge could double (41,700+5,500/-4,700 m3 s-1), while the regional GLOF hazard may increase largest in the Karakoram. To conclude, these three stages-from GLOF detection, to analysing their frequency and estimating regional GLOF hazard-provide a framework for modern GLOF hazard assessment. Given the rapidly growing population, infrastructure, and hydropower projects in the Himalayas, this thesis assists in quantifying the purely climate-driven contribution to hazard and risk from GLOFs.}, language = {en} } @misc{RawelHuschekSaguTchewonpietal.2019, author = {Rawel, Harshadrai Manilal and Huschek, Gerd and Sagu Tchewonpi, Sorel and Homann, Thomas}, title = {Cocoa Bean Proteins}, series = {Postprints der Universit{\"a}t Potsdam: Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam: Mathematisch-Naturwissenschaftliche Reihe}, number = {681}, issn = {1866-8372}, doi = {10.25932/publishup-42595}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-425953}, pages = {20}, year = {2019}, abstract = {The protein fractions of cocoa have been implicated influencing both the bioactive potential and sensory properties of cocoa and cocoa products. The objective of the present review is to show the impact of different stages of cultivation and processing with regard to the changes induced in the protein fractions. Special focus has been laid on the major seed storage proteins throughout the different stages of processing. The study starts with classical introduction of the extraction and the characterization methods used, while addressing classification approaches of cocoa proteins evolved during the timeline. The changes in protein composition during ripening and maturation of cocoa seeds, together with the possible modifications during the post-harvest processing (fermentation, drying, and roasting), have been documented. Finally, the bioactive potential arising directly or indirectly from cocoa proteins has been elucidated. The "state of the art" suggests that exploration of other potentially bioactive components in cocoa needs to be undertaken, while considering the complexity of reaction products occurring during the roasting phase of the post-harvest processing. Finally, the utilization of partially processed cocoa beans (e.g., fermented, conciliatory thermal treatment) can be recommended, providing a large reservoir of bioactive potentials arising from the protein components that could be instrumented in functionalizing foods.}, language = {en} } @phdthesis{Richter2018, author = {Richter, Rico}, title = {Concepts and techniques for processing and rendering of massive 3D point clouds}, doi = {10.25932/publishup-42330}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-423304}, school = {Universit{\"a}t Potsdam}, pages = {v, 131}, year = {2018}, abstract = {Remote sensing technology, such as airborne, mobile, or terrestrial laser scanning, and photogrammetric techniques, are fundamental approaches for efficient, automatic creation of digital representations of spatial environments. For example, they allow us to generate 3D point clouds of landscapes, cities, infrastructure networks, and sites. As essential and universal category of geodata, 3D point clouds are used and processed by a growing number of applications, services, and systems such as in the domains of urban planning, landscape architecture, environmental monitoring, disaster management, virtual geographic environments as well as for spatial analysis and simulation. While the acquisition processes for 3D point clouds become more and more reliable and widely-used, applications and systems are faced with more and more 3D point cloud data. In addition, 3D point clouds, by their very nature, are raw data, i.e., they do not contain any structural or semantics information. Many processing strategies common to GIS such as deriving polygon-based 3D models generally do not scale for billions of points. GIS typically reduce data density and precision of 3D point clouds to cope with the sheer amount of data, but that results in a significant loss of valuable information at the same time. This thesis proposes concepts and techniques designed to efficiently store and process massive 3D point clouds. To this end, object-class segmentation approaches are presented to attribute semantics to 3D point clouds, used, for example, to identify building, vegetation, and ground structures and, thus, to enable processing, analyzing, and visualizing 3D point clouds in a more effective and efficient way. Similarly, change detection and updating strategies for 3D point clouds are introduced that allow for reducing storage requirements and incrementally updating 3D point cloud databases. In addition, this thesis presents out-of-core, real-time rendering techniques used to interactively explore 3D point clouds and related analysis results. All techniques have been implemented based on specialized spatial data structures, out-of-core algorithms, and GPU-based processing schemas to cope with massive 3D point clouds having billions of points. All proposed techniques have been evaluated and demonstrated their applicability to the field of geospatial applications and systems, in particular for tasks such as classification, processing, and visualization. Case studies for 3D point clouds of entire cities with up to 80 billion points show that the presented approaches open up new ways to manage and apply large-scale, dense, and time-variant 3D point clouds as required by a rapidly growing number of applications and systems.}, language = {en} } @misc{MurawskiBuergerVorogushynetal.2016, author = {Murawski, Aline and B{\"u}rger, Gerd and Vorogushyn, Sergiy and Merz, Bruno}, title = {Can local climate variability be explained by weather patterns?}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {525}, issn = {1866-8372}, doi = {10.25932/publishup-41015}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-410155}, pages = {24}, year = {2016}, abstract = {To understand past flood changes in the Rhine catchment and in particular the role of anthropogenic climate change in extreme flows, an attribution study relying on a proper GCM (general circulation model) downscaling is needed. A downscaling based on conditioning a stochastic weather generator on weather patterns is a promising approach. This approach assumes a strong link between weather patterns and local climate, and sufficient GCM skill in reproducing weather pattern climatology. These presuppositions are unprecedentedly evaluated here using 111 years of daily climate data from 490 stations in the Rhine basin and comprehensively testing the number of classification parameters and GCM weather pattern characteristics. A classification based on a combination of mean sea level pressure, temperature, and humidity from the ERA20C reanalysis of atmospheric fields over central Europe with 40 weather types was found to be the most appropriate for stratifying six local climate variables. The corresponding skill is quite diverse though, ranging from good for radiation to poor for precipitation. Especially for the latter it was apparent that pressure fields alone cannot sufficiently stratify local variability. To test the skill of the latest generation of GCMs from the CMIP5 ensemble in reproducing the frequency, seasonality, and persistence of the derived weather patterns, output from 15 GCMs is evaluated. Most GCMs are able to capture these characteristics well, but some models showed consistent deviations in all three evaluation criteria and should be excluded from further attribution analysis.}, language = {en} } @phdthesis{Bamberg2014, author = {Bamberg, Marlene}, title = {Planetary mapping tools applied to floor-fractured craters on Mars}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72104}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {Planetary research is often user-based and requires considerable skill, time, and effort. Unfortunately, self-defined boundary conditions, definitions, and rules are often not documented or not easy to comprehend due to the complexity of research. This makes a comparison to other studies, or an extension of the already existing research, complicated. Comparisons are often distorted, because results rely on different, not well defined, or even unknown boundary conditions. The purpose of this research is to develop a standardized analysis method for planetary surfaces, which is adaptable to several research topics. The method provides a consistent quality of results. This also includes achieving reliable and comparable results and reducing the time and effort of conducting such studies. A standardized analysis method is provided by automated analysis tools that focus on statistical parameters. Specific key parameters and boundary conditions are defined for the tool application. The analysis relies on a database in which all key parameters are stored. These databases can be easily updated and adapted to various research questions. This increases the flexibility, reproducibility, and comparability of the research. However, the quality of the database and reliability of definitions directly influence the results. To ensure a high quality of results, the rules and definitions need to be well defined and based on previously conducted case studies. The tools then produce parameters, which are obtained by defined geostatistical techniques (measurements, calculations, classifications). The idea of an automated statistical analysis is tested to proof benefits but also potential problems of this method. In this study, I adapt automated tools for floor-fractured craters (FFCs) on Mars. These impact craters show a variety of surface features, occurring in different Martian environments, and having different fracturing origins. They provide a complex morphological and geological field of application. 433 FFCs are classified by the analysis tools due to their fracturing process. Spatial data, environmental context, and crater interior data are analyzed to distinguish between the processes involved in floor fracturing. Related geologic processes, such as glacial and fluvial activity, are too similar to be separately classified by the automated tools. Glacial and fluvial fracturing processes are merged together for the classification. The automated tools provide probability values for each origin model. To guarantee the quality and reliability of the results, classification tools need to achieve an origin probability above 50 \%. This analysis method shows that 15 \% of the FFCs are fractured by intrusive volcanism, 20 \% by tectonic activity, and 43 \% by water \& ice related processes. In total, 75 \% of the FFCs are classified to an origin type. This can be explained by a combination of origin models, superposition or erosion of key parameters, or an unknown fracturing model. Those features have to be manually analyzed in detail. Another possibility would be the improvement of key parameters and rules for the classification. This research shows that it is possible to conduct an automated statistical analysis of morphologic and geologic features based on analysis tools. Analysis tools provide additional information to the user and are therefore considered assistance systems.}, language = {en} } @phdthesis{Jamil2010, author = {Jamil, Abdlhamed}, title = {Fernerkundung und GIS zur Erfassung, Modellierung und Visualisierung orientalischer Stadtstrukturen : das Beispiel Sanaa (Jemen)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-50200}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Gegenstand dieser Arbeit ist die Konzeption, Entwicklung und exemplarische Implementierung eines generischen Verfahrens zur Erfassung, Verarbeitung, Auswertung und kartographischen Visualisierung urbaner Strukturen im altweltlichen Trockeng{\"u}rtel mittels hochaufl{\"o}sender operationeller Fernerkundungsdaten. Das Verfahren wird am Beispiel der jemenitischen Hauptstadt Sanaa einer Vertreterin des Typus der Orientalischen Stadt angewandt und evaluiert. Das zu entwickelnde Verfahren soll auf Standardverfahren und Systemen der raumbezogenen Informationsverarbeitung basieren und in seinen wesentlichen Prozessschritten automatisiert werden k{\"o}nnen. Daten von hochaufl{\"o}senden operationellen Fernerkundungssystemen (wie z.B. QuickBird, Ikonos u. a.) erlauben die Erkennung und Kartierung urbaner Objekte, wie Geb{\"a}ude, Straßen und sogar Autos. Die mit ihnen erstellten Karten und den daraus gewonnenen Informationen k{\"o}nnen zur Erfassung von Urbanisierungsprozessen (Stadt- und Bev{\"o}lkerungswachstum) herangezogen werden. Sie werden auch zur Generierung von 3D-Stadtmodellen genutzt. Diese dienen z.B. der Visualisierung f{\"u}r touristische Anwendungen, f{\"u}r die Stadtplanung, f{\"u}r L{\"a}rmanalysen oder f{\"u}r die Standortplanung von Mobilfunkantennen. Bei dem in dieser Arbeit erzeugten 3D-Visualisierung wurden jedoch keine Geb{\"a}udedetails erfasst. Entscheidend war vielmehr die Wiedergabe der Siedlungsstruktur, die im Vorhandensein und in der Anordnung der Geb{\"a}ude liegt. In dieser Arbeit wurden Daten des Satellitensensors Quickbird von 2005 verwendet. Sie zeigen einen Ausschnitt der Stadt Sanaa in Jemen. Die Fernerkundungsdaten wurden durch andere Daten, u.a. auch Gel{\"a}ndedaten, erg{\"a}nzt und verifiziert. Das ausgearbeitete Verfahren besteht aus der Klassifikation der Satellitenbild-aufnahme, die u.a. pixelbezogen und f{\"u}r jede Klasse einzeln (pixelbezogene Klassifikation auf Klassenebene) durchgef{\"u}hrt wurde. Zus{\"a}tzlich fand eine visuelle Interpretation der Satellitenbildaufnahme statt, bei der einzelne Fl{\"a}chen und die Straßen digitalisiert und die Objekte mit Symbolen gekennzeichnet wurden. Die aus beiden Verfahren erstellten Stadtkarten wurden zu einer fusioniert. Durch die Kombination der Ergebnisse werden die Vorteile beider Karten in einer vereint und ihre jeweiligen Schw{\"a}chen beseitigt bzw. minimiert. Die digitale Erfassung der Konturlinien auf der Orthophotomap von Sanaa erlaubte die Erstellung eines Digitalen Gel{\"a}ndemodells, das der dreidimensionalen Darstellung des Altstadtbereichs von Sanaa diente. Die 3D-Visualisierung wurde sowohl von den pixelbezogenen Klassifikationsergebnissen auf Klassenebene als auch von der digitalen Erfassung der Objekte erstellt. Die Ergebnisse beider Visualisierungen wurden im Anschluss in einer Stadtkarte vereint. Bei allen Klassifikationsverfahren wurden die asphaltierten Straßen, die Vegetation und einzeln stehende Geb{\"a}ude sehr gut erfasst. Die Klassifikation der Altstadt gestaltete sich aufgrund der dort f{\"u}r die Klassifikation herrschenden ung{\"u}nstigen Bedingungen am problematischsten. Die insgesamt besten Ergebnisse mit den h{\"o}chsten Genauigkeitswerten wurden bei der pixelbezogenen Klassifikation auf Klassenebene erzielt. Dadurch, dass jede Klasse einzeln klassifiziert wurde, konnte die zu einer Klasse geh{\"o}rende Fl{\"a}che besser erfasst und nachbearbeitet werden. Die Datenmenge wurde reduziert, die Bearbeitungszeit somit k{\"u}rzer und die Speicherkapazit{\"a}t geringer. Die Auswertung bzw. visuelle Validierung der pixel-bezogenen Klassifikationsergebnisse auf Klassenebene mit dem Originalsatelliten-bild gestaltete sich einfacher und erfolgte genauer als bei den anderen durch-gef{\"u}hrten Klassifikationsverfahren. Außerdem war es durch die alleinige Erfassung der Klasse Geb{\"a}ude m{\"o}glich, eine 3D-Visualisierung zu erzeugen. Bei einem Vergleich der erstellten Stadtkarten ergibt sich, dass die durch die visuelle Interpretation erstellte Karte mehr Informationen enth{\"a}lt. Die von den pixelbezogenen Klassifikationsergebnissen auf Klassenebene erstellte Karte ist aber weniger arbeits- und zeitaufwendig zu erzeugen. Zudem arbeitet sie die Struktur einer orientalischen Stadt mit den wesentlichen Merkmalen besser heraus. Durch die auf Basis der 2D-Stadtkarten erstellte 3D-Visualisierung wird ein anderer r{\"a}umlicher Eindruck vermittelt und bestimmte Elemente einer orientalischen Stadt deutlich gemacht. Dazu z{\"a}hlen die sich in der Altstadt befindenden Sackgassen und die ehemalige Stadtmauer. Auch die f{\"u}r Sanaa typischen Hochh{\"a}user werden in der 3D-Visualisierung erkannt. Insgesamt wurde in der Arbeit ein generisches Verfahren entwickelt, dass mit geringen Modifikationen auch auf andere st{\"a}dtische R{\"a}ume des Typus orientalische Stadt angewendet werden kann.}, language = {de} } @book{Richter2010, author = {Richter, Angelika}, title = {Klassifikationen von Computerspielen}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-076-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-43901}, publisher = {Universit{\"a}t Potsdam}, pages = {145}, year = {2010}, abstract = {Klassifikationen von Computerspielen widmet sich den Begriffen, mit denen Computerspiele zu Klassifikationszwecken versehen werden. Eine repr{\"a}sentative Auswahl an derartigen Klassifikationsmodellen, die die Arbeiten von Designern, Journalisten, P{\"a}dagogen, Laien und expliziten Computerspielforschern abdeckt, wird vorgestellt und hinsichtlich ihrer Anwendbarkeit zur eindeutigen Bestimmung konkreter Spiele bewertet. Dabei zeigen sich zwei grundlegend verschiedene Herangehensweisen an die Problematik: „Kategorisierungen" stellen feste Kategorien auf, in die einzelne Spiel eindeutig einsortiert werden sollen, w{\"a}hrend „Typologien" die einzelnen Elemente von Spielen untersuchen und klassifizieren. Beide Ans{\"a}tze werden analysiert und ihre jeweiligen Vor- und Nachteile aufgezeigt. Da offensichtlich wird, dass die Klassifikation von Computerspielen in bedeutendem Maße vom jeweiligen zugrunde liegenden Verst{\"a}ndnis davon, was ein „Computerspiel" sei, abh{\"a}ngt, ist der Untersuchung der Klassifikationsmodelle eine Betrachtung dieser problematischen Begriffsdefinition vorangestellt, die beispielhaft an vier ausgew{\"a}hlten Aspekten durchgef{\"u}hrt wird.}, language = {de} } @phdthesis{Ohrnberger2001, author = {Ohrnberger, Matthias}, title = {Continuous automatic classification of seismic signals of volcanic origin at Mt. Merapi, Java, Indonesia}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000028}, school = {Universit{\"a}t Potsdam}, year = {2001}, abstract = {Aufgrund seiner nahezu kontinuierlichen eruptiven Aktivit{\"a}t z{\"a}hlt der Merapi zu den gef{\"a}hrlichsten Vulkanen der Welt. Der Merapi befindet sich im Zentralteil der dicht bev{\"o}lkerten Insel Java (Indonesien). Selbst kleinere Ausbr{\"u}che des Merapi stellen deswegen eine große Gefahr f{\"u}r die ans{\"a}ssige Bev{\"o}lkerung in der Umgebung des Vulkans dar. Die am Merapi beobachtete enge Korrelation zwischen seismischer und vulkanischer Aktivit{\"a}t erlaubt es, mit Hilfe der {\"U}berwachung der seismischen Aktivit{\"a}t Ver{\"a}nderungen des Aktivit{\"a}tszustandes des Merapi zu erkennen. Ein System zur automatischen Detektion und Klassifizierung seismischer Ereignisse liefert einen wichtigen Beitrag f{\"u}r die schnelle Analyse der seismischen Aktivit{\"a}t. Im Falle eines bevorstehenden Ausbruchszyklus bedeutet dies ein wichtiges Hilfsmittel f{\"u}r die vor Ort ans{\"a}ssigen Wissenschaftler. In der vorliegenden Arbeit wird ein Mustererkennungsverfahren verwendet, um die Detektion und Klassifizierung seismischer Signale vulkanischen Urprunges aus den kontinuierlich aufgezeichneten Daten in Echtzeit zu bewerkstelligen. Der hier verwendete A nsatz der hidden Markov Modelle (HMM) wird motiviert durch die große {\"A}hnlichkeit von seismischen Signalen vulkanischen Ursprunges und Sprachaufzeichnungen und den großen Erfolg, den HMM-basierte Erkennungssysteme in der automatischen Spracherkennung erlangt haben. F{\"u}r eine erfolgreiche Implementierung eines Mustererkennungssytems ist es notwendig, eine geeignete Parametrisierung der Rohdaten vorzunehmen. Basierend auf den Erfahrungswerten seismologischer Observatorien wird ein Vorgehen zur Parametrisierung des seismischen Wellenfeldes auf Grundlage von robusten Analyseverfahren vorgeschlagen. Die Wellenfeldparameter werden pro Zeitschritt in einen reell-wertigen Mustervektor zusammengefasst. Die aus diesen Mustervektoren gebildete Zeitreihe ist dann Gegenstand des HMM-basierten Erkennungssystems. Um diskrete hidden Markov Modelle (DHMM) verwenden zu k{\"o}nnen, werden die Mustervektoren durch eine lineare Transformation und nachgeschaltete Vektor Quantisierung in eine diskrete Symbolsequenz {\"u}berf{\"u}hrt. Als Klassifikator kommt eine Maximum-Likelihood Testfunktion zwischen dieser Sequenz und den, in einem {\"u}berwachten Lernverfahren trainierten, DHMMs zum Einsatz. Die am Merapi kontinuierlich aufgezeichneten seismischen Daten im Zeitraum vom 01.07. und 05.07.1998 sind besonders f{\"u}r einen Test dieses Klassifikationssystems geeignet. In dieser Zeit zeigte der Merapi einen rapiden Anstieg der Seismizit{\"a}t kurz bevor dem Auftreten zweier Eruptionen am 10.07. und 19.07.1998. Drei der bekannten, vom Vulkanologischen Dienst in Indonesien beschriebenen, seimischen Signalklassen konnten in diesem Zeitraum beobachtet werden. Es handelt sich hierbei um flache vulkanisch-tektonische Beben (VTB, h < 2.5 km), um sogenannte MP-Ereignisse, die in direktem Zusammenhang mit dem Wachstum des aktiven Lavadoms gebracht werden, und um seismische Ereignisse, die durch Gesteinslawinen erzeugt werden (lokaler Name: Guguran). Die spezielle Geometrie des digitalen seismischen Netzwerkes am Merapi besteht aus einer Kombination von drei Mini-Arrays an den Flanken des Merapi. F{\"u}r die Parametrisierung des Wellenfeldes werden deswegen seismische Array-Verfahren eingesetzt. Die individuellen Wellenfeld Parameter wurden hinsichtlich ihrer Relevanz f{\"u}r den Klassifikationsprozess detailliert analysiert. F{\"u}r jede der drei Signalklassen wurde ein Satz von DHMMs trainiert. Zus{\"a}tzlich wurden als Ausschlussklassen noch zwei Gruppen von Noise-Modellen unterschieden. Insgesamt konnte mit diesem Ansatz eine Erkennungsrate von 67 \% erreicht werden. Im Mittel erzeugte das automatische Klassifizierungssystem 41 Fehlalarme pro Tag und Klasse. Die G{\"u}te der Klassifikationsergebnisse zeigt starke Variationen zwischen den individuellen Signalklassen. Flache vulkanisch-tektonische Beben (VTB) zeigen sehr ausgepr{\"a}gte Wellenfeldeigenschaften und, zumindest im untersuchten Zeitraum, sehr stabile Zeitmuster der individuellen Wellenfeldparameter. Das DHMM-basierte Klassifizierungssystem erlaubte f{\"u}r diesen Ereignistyp nahezu 89\% richtige Entscheidungen und erzeugte im Mittel 2 Fehlalarme pro Tag. Ereignisse der Klassen MP und Guguran sind mit dem automatischen System schwieriger zu erkennen. 64\% aller MP-Ereignisse und 74\% aller Guguran-Ereignisse wurden korrekt erkannt. Im Mittel kam es bei MP-Ereignissen zu 87 Fehlalarmen und bei Guguran Ereignissen zu 33 Fehlalarmen pro Tag. Eine Vielzahl der Fehlalarme und nicht detektierten Ereignisse entstehen jedoch durch eine Verwechslung dieser beiden Signalklassen im automatischen Erkennnungsprozess. Dieses Ergebnis konnte aufgrund der {\"a}hnlichen Wellenfeldeigenschaften beider Signalklassen erkl{\"a}rt werden, deren Ursache vermutlich in den bekannt starken Einfl{\"u}ssen des Mediums entlang des Wellenausbreitungsweges in vulkanischen Gebieten liegen. Insgesamt ist die Erkennungsleistung des entwickelten automatischen Klassifizierungssystems als sehr vielversprechend einzustufen. Im Gegensatz zu Standardverfahren, bei denen in der Seismologie {\"u}blicherweise nur der Startzeitpunkt eines seismischen Ereignisses detektiert wird, werden in dem untersuchten Verfahren seismische Ereignisse in ihrer Gesamtheit erfasst und zudem im selben Schritt bereits klassifiziert.}, language = {en} }