@article{ChenLangeAndjelkovicetal.2022, author = {Chen, Junchao and Lange, Thomas and Andjelkovic, Marko and Simevski, Aleksandar and Lu, Li and Krstic, Milos}, title = {Solar particle event and single event upset prediction from SRAM-based monitor and supervised machine learning}, series = {IEEE transactions on emerging topics in computing / IEEE Computer Society, Institute of Electrical and Electronics Engineers}, volume = {10}, journal = {IEEE transactions on emerging topics in computing / IEEE Computer Society, Institute of Electrical and Electronics Engineers}, number = {2}, publisher = {Institute of Electrical and Electronics Engineers}, address = {[New York, NY]}, issn = {2168-6750}, doi = {10.1109/TETC.2022.3147376}, pages = {564 -- 580}, year = {2022}, abstract = {The intensity of cosmic radiation may differ over five orders of magnitude within a few hours or days during the Solar Particle Events (SPEs), thus increasing for several orders of magnitude the probability of Single Event Upsets (SEUs) in space-borne electronic systems. Therefore, it is vital to enable the early detection of the SEU rate changes in order to ensure timely activation of dynamic radiation hardening measures. In this paper, an embedded approach for the prediction of SPEs and SRAM SEU rate is presented. The proposed solution combines the real-time SRAM-based SEU monitor, the offline-trained machine learning model and online learning algorithm for the prediction. With respect to the state-of-the-art, our solution brings the following benefits: (1) Use of existing on-chip data storage SRAM as a particle detector, thus minimizing the hardware and power overhead, (2) Prediction of SRAM SEU rate one hour in advance, with the fine-grained hourly tracking of SEU variations during SPEs as well as under normal conditions, (3) Online optimization of the prediction model for enhancing the prediction accuracy during run-time, (4) Negligible cost of hardware accelerator design for the implementation of selected machine learning model and online learning algorithm. The proposed design is intended for a highly dependable and self-adaptive multiprocessing system employed in space applications, allowing to trigger the radiation mitigation mechanisms before the onset of high radiation levels.}, language = {en} } @techreport{GagrčinSchaetzRakowskietal.2021, author = {Gagrčin, Emilija and Schaetz, Nadja and Rakowski, Niklas and Toth, Roland and Renz, Andr{\´e} and Vladova, Gergana and Emmer, Martin}, title = {We and AI}, publisher = {Weizenbaum Institute for the Networked Society - the German Internet}, address = {Berlin}, doi = {10.34669/wi/1}, pages = {70}, year = {2021}, language = {en} } @article{WilhelmsBoersigYangetal.2022, author = {Wilhelms, Andre and B{\"o}rsig, Nicolas and Yang, Jingwei and Holbach, Andreas and Norra, Stefan}, title = {Insights into phytoplankton dynamics and water quality monitoring with the BIOFISH at the Elbe River, Germany}, series = {Water}, volume = {14}, journal = {Water}, number = {13}, publisher = {MDPI}, address = {Basel}, issn = {2073-4441}, doi = {10.3390/w14132078}, pages = {20}, year = {2022}, abstract = {Understanding the key factors influencing the water quality of large river systems forms an important basis for the assessment and protection of cross-regional ecosystems and the implementation of adapted water management concepts. However, identifying these factors requires in-depth comprehension of the unique environmental systems, which can only be achieved by detailed water quality monitoring. Within the scope of the joint science and sports event "Elbschwimmstaffel" (swimming relay on the river Elbe) in June/July 2017 organized by the German Ministry of Education and Research, water quality data were acquired along a 550 km long stretch of the Elbe River in Germany. During the survey, eight physiochemical water quality parameters were recorded in high spatial and temporal resolution with the BIOFISH multisensor system. Multivariate statistical methods were applied to identify and delineate processes influencing the water quality. The BIOFISH dataset revealed that phytoplankton activity has a major impact on the water quality of the Elbe River in the summer months. The results suggest that phytoplankton biomass constitutes a substantial proportion of the suspended particles and that photosynthetic activity of phytoplankton is closely related to significant temporal changes in pH and oxygen saturation. An evaluation of the BIOFISH data based on the combination of statistical analysis with weather and discharge data shows that the hydrological and meteorological history of the sampled water body was the main driver of phytoplankton dynamics. This study demonstrates the capacity of longitudinal river surveys with the BIOFISH or similar systems for water quality assessment, the identification of pollution sources and their utilization for online in situ monitoring of rivers.}, language = {en} } @article{UlbrichtMohrAltenburgetal.2021, author = {Ulbricht, Alexander and Mohr, Gunther and Altenburg, Simon J. and Oster, Simon and Maierhofer, Christiane and Bruno, Giovanni}, title = {Can potential defects in LPBF be healed from the laser exposure of subsequent layers?}, series = {Metals : open access journal}, volume = {11}, journal = {Metals : open access journal}, number = {7}, publisher = {MDPI}, address = {Basel}, issn = {2075-4701}, doi = {10.3390/met11071012}, pages = {14}, year = {2021}, abstract = {Additive manufacturing (AM) of metals and in particular laser powder bed fusion (LPBF) enables a degree of freedom in design unparalleled by conventional subtractive methods. To ensure that the designed precision is matched by the produced LPBF parts, a full understanding of the interaction between the laser and the feedstock powder is needed. It has been shown that the laser also melts subjacent layers of material underneath. This effect plays a key role when designing small cavities or overhanging structures, because, in these cases, the material underneath is feed-stock powder. In this study, we quantify the extension of the melt pool during laser illumination of powder layers and the defect spatial distribution in a cylindrical specimen. During the LPBF process, several layers were intentionally not exposed to the laser beam at various locations, while the build process was monitored by thermography and optical tomography. The cylinder was finally scanned by X-ray computed tomography (XCT). To correlate the positions of the unmolten layers in the part, a staircase was manufactured around the cylinder for easier registration. The results show that healing among layers occurs if a scan strategy is applied, where the orientation of the hatches is changed for each subsequent layer. They also show that small pores and surface roughness of solidified material below a thick layer of unmolten material (>200 mu m) serve as seeding points for larger voids. The orientation of the first two layers fully exposed after a thick layer of unmolten powder shapes the orientation of these voids, created by a lack of fusion.}, language = {en} } @article{CamargoSchirrmannLandwehretal.2021, author = {Camargo, Tibor de and Schirrmann, Michael and Landwehr, Niels and Dammer, Karl-Heinz and Pflanz, Michael}, title = {Optimized deep learning model as a basis for fast UAV mapping of weed species in winter wheat crops}, series = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, volume = {13}, journal = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, number = {9}, publisher = {MDPI}, address = {Basel}, issn = {2072-4292}, doi = {10.3390/rs13091704}, pages = {19}, year = {2021}, abstract = {Weed maps should be available quickly, reliably, and with high detail to be useful for site-specific management in crop protection and to promote more sustainable agriculture by reducing pesticide use. Here, the optimization of a deep residual convolutional neural network (ResNet-18) for the classification of weed and crop plants in UAV imagery is proposed. The target was to reach sufficient performance on an embedded system by maintaining the same features of the ResNet-18 model as a basis for fast UAV mapping. This would enable online recognition and subsequent mapping of weeds during UAV flying operation. Optimization was achieved mainly by avoiding redundant computations that arise when a classification model is applied on overlapping tiles in a larger input image. The model was trained and tested with imagery obtained from a UAV flight campaign at low altitude over a winter wheat field, and classification was performed on species level with the weed species Matricaria chamomilla L., Papaver rhoeas L., Veronica hederifolia L., and Viola arvensis ssp. arvensis observed in that field. The ResNet-18 model with the optimized image-level prediction pipeline reached a performance of 2.2 frames per second with an NVIDIA Jetson AGX Xavier on the full resolution UAV image, which would amount to about 1.78 ha h(-1) area output for continuous field mapping. The overall accuracy for determining crop, soil, and weed species was 94\%. There were some limitations in the detection of species unknown to the model. When shifting from 16-bit to 32-bit model precision, no improvement in classification accuracy was observed, but a strong decline in speed performance, especially when a higher number of filters was used in the ResNet-18 model. Future work should be directed towards the integration of the mapping process on UAV platforms, guiding UAVs autonomously for mapping purpose, and ensuring the transferability of the models to other crop fields.}, language = {en} } @article{PrieskeChaabeneKullmannetal.2022, author = {Prieske, Olaf and Chaabene, Helmi and Kullmann, Niclas and Granacher, Urs}, title = {Effects of Individualized Versus Traditional Power Training on Strength, Power, Jump Performances, and Body Composition in Young Male Nordic Athletes}, series = {International journal of sports physiology and performance}, volume = {17}, journal = {International journal of sports physiology and performance}, number = {4}, publisher = {Human Kinetics Publ.}, address = {Champaign}, issn = {1555-0265}, doi = {10.1123/ijspp.2021-0074}, pages = {541 -- 548}, year = {2022}, abstract = {Purpose: This study aimed to examine the effects of individualized-load power training (IPT) versus traditional moderate-load power training (TPT) on strength, power, jump performance, and body composition in elite young Nordic athletes. Methods: In a randomized crossover design, 10 young male athletes (ski jumpers, Nordic combined athletes) age 17.5 (0.6) years (biological maturity status: +3.5 y postpeak height velocity) who competed on a national or international level performed 5 weeks of IPT (4 x 5 repetitions at 49\%-72\% 1-repetiton maximum [RM]) and TPT (5 x 5 repetitions at 50\%-60\% 1-RM) in addition to their regular training. Testing before, between, and after both training blocks comprised the assessment of muscle strength (loaded back squat 3-RM), power (maximal loaded back squat power), jump performance (eg, drop-jump height, reactive strength index), and body composition (eg, skeletal muscle mass). Results: Significant, large-size main effects for time were found for muscle strength (P < .01; g = 2.7), reactive strength index (P = .03; g= 1.6), and drop jump height (P = .02; g= 1.9) irrespective of the training condition (IPT, TPT). No significant time-by-condition interactions were observed. For measures of body composition, no significant main effects of condition and time or time-by-condition interactions were found. Conclusions: Our findings demonstrate that short-term IPT and TPT at moderate loads in addition to regular training were equally effective in improving measures of muscle strength (loaded back squat 3-RM) and vertical jump performance (reactive strength index, drop jump, and height) in young Nordic athletes.}, language = {en} } @article{PrieskeChaabeneGaebleretal.2020, author = {Prieske, Olaf and Chaabene, Helmi and G{\"a}bler, Martijn and Herz, Michael and Helm, Norman and Markov, Adrian and Granacher, Urs}, title = {Seasonal changes in anthropometry, body composition, and physical fitness and the relationships with sporting success in young sub-elite judo athletes}, series = {International journal of environmental research and public health : IJERPH}, volume = {17}, journal = {International journal of environmental research and public health : IJERPH}, number = {19}, publisher = {MDPI AG}, address = {Basel}, issn = {1660-4601}, doi = {10.3390/ijerph17197169}, pages = {17}, year = {2020}, abstract = {This exploratory study aimed to monitor long-term seasonal developments in measures of anthropometry, body composition, and physical fitness in young judo athletes, and to compute associations between these measures and sporting success. Forty-four young judoka (20 females, 24 males) volunteered to participate. Tests for the assessment of anthropometry (e.g., body height/mass), body-composition (e.g., lean body mass), muscle strength (isometric handgrip strength), vertical jumping (e.g., countermovement-jump (CMJ) height), and dynamic balance (Y-balance test) were conducted at the beginning and end of a 10-month training season. Additionally, sporting success at the end of the season was recorded for each athlete. Analyses revealed significant time x sex interaction effects for lean-body-mass, isometric handgrip strength, and CMJ height (0.7 <= d <= 1.6). Post-hoc analyses showed larger gains for all measures in young males (1.9 <= d <= 6.0) compared with females (d = 2.4) across the season. Additionally, significant increases in body height and mass as well as Y-balance test scores were found from pre-to-post-test (1.2 <= d <= 4.3), irrespective of sex. Further, non-significant small-to-moderate-sized correlations were identified between changes in anthropometry/body composition/physical fitness and sporting success (p > 0.05; -0.34 <= rho <= 0.32). Regression analysis confirmed that no model significantly predicted sporting success. Ten months of judo training and/or growth/maturation contributed to significant changes in anthropometry, body composition, and physical fitness, particularly in young male judo athletes.}, language = {en} } @article{SchirrmannLandwehrGiebeletal.2021, author = {Schirrmann, Michael and Landwehr, Niels and Giebel, Antje and Garz, Andreas and Dammer, Karl-Heinz}, title = {Early detection of stripe rust in winter wheat using deep residual neural networks}, series = {Frontiers in plant science : FPLS}, volume = {12}, journal = {Frontiers in plant science : FPLS}, publisher = {Frontiers Media}, address = {Lausanne}, issn = {1664-462X}, doi = {10.3389/fpls.2021.469689}, pages = {14}, year = {2021}, abstract = {Stripe rust (Pst) is a major disease of wheat crops leading untreated to severe yield losses. The use of fungicides is often essential to control Pst when sudden outbreaks are imminent. Sensors capable of detecting Pst in wheat crops could optimize the use of fungicides and improve disease monitoring in high-throughput field phenotyping. Now, deep learning provides new tools for image recognition and may pave the way for new camera based sensors that can identify symptoms in early stages of a disease outbreak within the field. The aim of this study was to teach an image classifier to detect Pst symptoms in winter wheat canopies based on a deep residual neural network (ResNet). For this purpose, a large annotation database was created from images taken by a standard RGB camera that was mounted on a platform at a height of 2 m. Images were acquired while the platform was moved over a randomized field experiment with Pst-inoculated and Pst-free plots of winter wheat. The image classifier was trained with 224 x 224 px patches tiled from the original, unprocessed camera images. The image classifier was tested on different stages of the disease outbreak. At patch level the image classifier reached a total accuracy of 90\%. To test the image classifier on image level, the image classifier was evaluated with a sliding window using a large striding length of 224 px allowing for fast test performance. At image level, the image classifier reached a total accuracy of 77\%. Even in a stage with very low disease spreading (0.5\%) at the very beginning of the Pst outbreak, a detection accuracy of 57\% was obtained. Still in the initial phase of the Pst outbreak with 2 to 4\% of Pst disease spreading, detection accuracy with 76\% could be attained. With further optimizations, the image classifier could be implemented in embedded systems and deployed on drones, vehicles or scanning systems for fast mapping of Pst outbreaks.}, language = {en} } @article{CoppalleRaveMoranetal.2021, author = {Coppalle, Sullivan and Rav{\´e}, Guillaume and Moran, Jason and Salhi, Iyed and Ben Abderrahman, Abderraouf and Zouita, Sghaeir and Granacher, Urs and Zouhal, Hassane}, title = {Internal and External Training Load in Under-19 versus Professional Soccer Players during the In-Season Period}, series = {International Journal of Environmental Research and Public Health}, volume = {18}, journal = {International Journal of Environmental Research and Public Health}, number = {2}, publisher = {MDPI AG}, address = {Basel}, issn = {1660-4601}, doi = {10.3390/ijerph18020558}, pages = {10}, year = {2021}, abstract = {This study aimed to compare the training load of a professional under-19 soccer team (U-19) to that of an elite adult team (EAT), from the same club, during the in-season period. Thirty-nine healthy soccer players were involved (EAT [n = 20]; U-19 [n = 19]) in the study which spanned four weeks. Training load (TL) was monitored as external TL, using a global positioning system (GPS), and internal TL, using a rating of perceived exertion (RPE). TL data were recorded after each training session. During soccer matches, players' RPEs were recorded. The internal TL was quantified daily by means of the session rating of perceived exertion (session-RPE) using Borg's 0-10 scale. For GPS data, the selected running speed intensities (over 0.5 s time intervals) were 12-15.9 km/h; 16-19.9 km/h; 20-24.9 km/h; >25 km/h (sprint). Distances covered between 16 and 19.9 km/h, > 20 km/h and >25 km/h were significantly higher in U-19 compared to EAT over the course of the study (p = 0.023, d = 0.243, small; p = 0.016, d = 0.298, small; and p = 0.001, d = 0.564, small, respectively). EAT players performed significantly fewer sprints per week compared to U-19 players (p = 0.002, d = 0.526, small). RPE was significantly higher in U-19 compared to EAT (p = 0.001, d = 0.188, trivial). The external and internal measures of TL were significantly higher in the U-19 group compared to the EAT soccer players. In conclusion, the results obtained show that the training load is greater in U19 compared to EAT.}, language = {en} } @article{RaveGranacherBoullosaetal.2020, author = {Rav{\´e}, Guillaume and Granacher, Urs and Boullosa, Daniel and Hackney, Anthony C. and Zouhal, Hassane}, title = {How to Use Global Positioning Systems (GPS) Data to Monitor Training Load in the "Real World" of Elite Soccer}, series = {Frontiers in Physiology}, volume = {11}, journal = {Frontiers in Physiology}, publisher = {Frontiers Research Foundation}, address = {Lausanne}, issn = {1664-042X}, doi = {10.3389/fphys.2020.00944}, pages = {11}, year = {2020}, language = {en} }