@article{MassonBambergStrickeretal.2019, author = {Masson, Torsten and Bamberg, Sebastian and Stricker, Michael and Heidenreich, Anna}, title = {"We can help ourselves": does community resilience buffer against the negative impact of flooding on mental health?}, series = {Natural hazards and earth system sciences}, volume = {19}, journal = {Natural hazards and earth system sciences}, number = {11}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1561-8633}, doi = {10.5194/nhess-19-2371-2019}, pages = {2371 -- 2384}, year = {2019}, abstract = {Empirical evidence of the relationship between social support and post-disaster mental health provides support for a general beneficial effect of social support (main-effect model; Wheaton, 1985). From a theoretical perspective, a buffering effect of social support on the negative relationship between disaster-related stress and mental health also seems plausible (stress-buffering model; Wheaton, 1985). Previous studies, however, (a) have paid less attention to the buffering effect of social support and (b) have mainly relied on interpersonal support (but not collective-level support such as community resilience) when investigating this issue. This previous work might have underestimated the effect of support on post-disaster mental health. Building on a sample of residents in Germany recently affected by flooding (N = 118), we show that community resilience to flooding (but not general interpersonal social support) buffered against the negative effects of flooding on post-disaster mental health. The results support the stress-buffering model and call for a more detailed look at the relationship between support and resilience and post-disaster adjustment, including collective-level variables.}, language = {en} } @article{GholamrezaieScheckWenderothBottetal.2019, author = {Gholamrezaie, Ershad and Scheck-Wenderoth, Magdalena and Bott, Judith and Heidbach, Oliver and Strecker, Manfred}, title = {3-D crustal density model of the Sea of Marmara}, series = {Solid Earth}, volume = {10}, journal = {Solid Earth}, publisher = {Copernicus Publ.}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-10-785-2019}, pages = {785 -- 807}, year = {2019}, abstract = {Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible "end-member" solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region.}, language = {en} } @article{GuillemoteauSimonHulinetal.2019, author = {Guillemoteau, Julien and Simon, Francois-Xavier and Hulin, Guillaume and Dousteyssier, Bertrand and Dacko, Marion and Tronicke, Jens}, title = {3-D imaging of subsurface magnetic permeability/susceptibility with portable frequency domain electromagnetic sensors for near surface exploration}, series = {Geophysical journal international}, volume = {219}, journal = {Geophysical journal international}, number = {3}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggz382}, pages = {1773 -- 1785}, year = {2019}, abstract = {The in-phase response collected by portable loop-loop electromagnetic induction (EMI) sensors operating at low and moderate induction numbers (<= 1) is typically used for sensing the magnetic permeability (or susceptibility) of the subsurface. This is due to the fact that the in-phase response contains a small induction fraction and a preponderant induced magnetization fraction. The magnetization fraction follows the magneto-static equations similarly to the magnetic method but with an active magnetic source. The use of an active source offers the possibility to collect data with several loop-loop configurations, which illuminate the subsurface with different sensitivity patterns. Such multiconfiguration soundings thereby allows the imaging of subsurface magnetic permeability/susceptibility variations through an inversion procedure. This method is not affected by the remnant magnetization and theoretically overcomes the classical depth ambiguity generally encountered with passive geomagnetic data. To invert multiconfiguration in-phase data sets, we propose a novel methodology based on a full-grid 3-D multichannel deconvolution (MCD) procedure. This method allows us to invert large data sets (e.g. consisting of more than a hundred thousand of data points) for a dense voxel-based 3-D model of magnetic susceptibility subject to smoothness constraints. In this study, we first present and discuss synthetic examples of our imaging procedure, which aim at simulating realistic conditions. Finally, we demonstrate the applicability of our method to field data collected across an archaeological site in Auvergne (France) to image the foundations of a Gallo-Roman villa built with basalt rock material. Our synthetic and field data examples demonstrate the potential of the proposed inversion procedure offering new and complementary ways to interpret data sets collected with modern EMI instruments.}, language = {en} } @article{IbarraLiuMeessenetal.2019, author = {Ibarra, Federico and Liu, Sibiao and Meeßen, Christian and Prezzi, Claudia Beatriz and Bott, Judith and Scheck-Wenderoth, Magdalena and Sobolev, Stephan Vladimir and Strecker, Manfred}, title = {3D data-derived lithospheric structure of the Central Andes and its implications for deformation: Insights from gravity and geodynamic modelling}, series = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, volume = {766}, journal = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0040-1951}, doi = {10.1016/j.tecto.2019.06.025}, pages = {453 -- 468}, year = {2019}, abstract = {We present a new three-dimensional density model of the Central Andes characterizing the structure and composition of the lithosphere together with a geodynamic simulation subjected to continental intraplate shortening. The principal aim of this study is to assess the link between heterogeneities in the lithosphere and different deformation patterns and styles along the orogen-foreland system of the Central Andes. First, we performed a 3D integration of new geological and geophysical data with previous models through forward modelling of Bouguer anomalies. Subsequently, a geodynamic model was set-up and parametrized from the previously obtained 3D structure and composition. We do not find a unambigous correlation between the resulting density configuration and terrane boundaries proposed by other authors. Our models reproduce the observed Bouguer anomaly and deformation patterns in the foreland. We find that thin-skinned deformation in the Subandean fold-and thrust belt is controlled by a thick sedimentary layer and coeval underthrusting of thin crust of the foreland beneath the thick crust of the Andean Plateau. In the adjacent thick-skinned deformation province of the inverted Cretaceous extensional Santa Barbara System sedimentary strata are much thinner and crustal thickness transitions from greater values in the Andean to a more reduced thickness in the foreland. Our results show that deformation processes occur where the highest gradients of lithospheric strength are present between the orogen and the foreland, thus suggesting a spatial correlation between deformation and lithospheric strength.}, language = {en} } @article{WinterSchneebergerDungetal.2019, author = {Winter, Benjamin and Schneeberger, Klaus and Dung, N. V. and Huttenlau, M. and Achleitner, S. and St{\"o}tter, J. and Merz, Bruno and Vorogushyn, Sergiy}, title = {A continuous modelling approach for design flood estimation on sub-daily time scale}, series = {Hydrological sciences journal = Journal des sciences hydrologiques}, volume = {64}, journal = {Hydrological sciences journal = Journal des sciences hydrologiques}, number = {5}, publisher = {Routledge, Taylor \& Francis Group}, address = {Abingdon}, issn = {0262-6667}, doi = {10.1080/02626667.2019.1593419}, pages = {539 -- 554}, year = {2019}, abstract = {Design flood estimation is an essential part of flood risk assessment. Commonly applied are flood frequency analyses and design storm approaches, while the derived flood frequency using continuous simulation has been getting more attention recently. In this study, a continuous hydrological modelling approach on an hourly time scale, driven by a multi-site weather generator in combination with a -nearest neighbour resampling procedure, based on the method of fragments, is applied. The derived 100-year flood estimates in 16 catchments in Vorarlberg (Austria) are compared to (a) the flood frequency analysis based on observed discharges, and (b) a design storm approach. Besides the peak flows, the corresponding runoff volumes are analysed. The spatial dependence structure of the synthetically generated flood peaks is validated against observations. It can be demonstrated that the continuous modelling approach can achieve plausible results and shows a large variability in runoff volume across the flood events.}, language = {en} } @article{EberliBernoulliVecseietal.2019, author = {Eberli, Gregor P. and Bernoulli, Daniel and Vecsei, Adam and Sekti, Rizky and Grasmueck, Mark and L{\"u}dmann, Thomas and Anselmetti, Flavio S. and Mutti, Maria and Della Porta, Giovanna}, title = {A Cretaceous carbonate delta drift in the Montagna della Maiella, Italy}, series = {Sedimentology : the journal of the International Association of Sedimentologists}, volume = {66}, journal = {Sedimentology : the journal of the International Association of Sedimentologists}, number = {4}, publisher = {Wiley}, address = {Hoboken}, issn = {0037-0746}, doi = {10.1111/sed.12590}, pages = {1266 -- 1301}, year = {2019}, abstract = {The Upper Cretaceous (Campanian-Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is compared to newly discovered contourite drifts in the Maldives. Like the drift deposits in the Maldives, the Orfento Formation fills a channel and builds a Miocene delta-shaped and mounded sedimentary body in the basin that is similar in size to the approximately 350 km(2) large coarse-grained bioclastic Miocene delta drifts in the Maldives. The composition of the bioclastic wedge of the Orfento Formation is also exclusively bioclastic debris sourced from the shallow-water areas and reworked clasts of the Orfento Formation itself. In the near mud-free succession, age-diagnostic fossils are sparse. The depositional textures vary from wackestone to float-rudstone and breccia/conglomerates, but rocks with grainstone and rudstone textures are the most common facies. In the channel, lensoid convex-upward breccias, cross-cutting channelized beds and thick grainstone lobes with abundant scours indicate alternating erosion and deposition from a high-energy current. In the basin, the mounded sedimentary body contains lobes with a divergent progradational geometry. The lobes are built by decametre thick composite megabeds consisting of sigmoidal clinoforms that typically have a channelized topset, a grainy foreset and a fine-grained bottomset with abundant irregular angular clasts. Up to 30 m thick channels filled with intraformational breccias and coarse grainstones pinch out downslope between the megabeds. In the distal portion of the wedge, stacked grainstone beds with foresets and reworked intraclasts document continuous sediment reworking and migration. The bioclastic wedge of the Orfento Formation has been variously interpreted as a succession of sea-level controlled slope deposits, a shoaling shoreface complex, or a carbonate tidal delta. Current-controlled delta drifts in the Maldives, however, offer a new interpretation because of their similarity in architecture and composition. These similarities include: (i) a feeder channel opening into the basin; (ii) an excavation moat at the exit of the channel; (iii) an overall mounded geometry with an apex that is in shallower water depth than the source channel; (iv) progradation of stacked lobes; (v) channels that pinch out in a basinward direction; and (vi) smaller channelized intervals that are arranged in a radial pattern. As a result, the Upper Cretaceous (Campanian-Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is here interpreted as a carbonate delta drift.}, language = {en} } @article{LontsiGarciaJerezCamiloMolinaVillegasetal.2019, author = {Lontsi, Agostiny Marrios and Garcia-Jerez, Antonio and Camilo Molina-Villegas, Juan and Jose Sanchez-Sesma, Francisco and Molkenthin, Christian and Ohrnberger, Matthias and Kr{\"u}ger, Frank and Wang, Rongjiang and Fah, Donat}, title = {A generalized theory for full microtremor horizontal-to-vertical [H/V(z,f)] spectral ratio interpretation in offshore and onshore environments}, series = {Geophysical journal international}, volume = {218}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggz223}, pages = {1276 -- 1297}, year = {2019}, abstract = {Advances in the field of seismic interferometry have provided a basic theoretical interpretation to the full spectrum of the microtremor horizontal-to-vertical spectral ratio [H/V(f)]. The interpretation has been applied to ambient seismic noise data recorded both at the surface and at depth. The new algorithm, based on the diffuse wavefield assumption, has been used in inversion schemes to estimate seismic wave velocity profiles that are useful input information for engineering and exploration seismology both for earthquake hazard estimation and to characterize surficial sediments. However, until now, the developed algorithms are only suitable for on land environments with no offshore consideration. Here, the microtremor H/V(z, f) modelling is extended for applications to marine sedimentary environments for a 1-D layered medium. The layer propagator matrix formulation is used for the computation of the required Green's functions. Therefore, in the presence of a water layer on top, the propagator matrix for the uppermost layer is defined to account for the properties of the water column. As an application example we analyse eight simple canonical layered earth models. Frequencies ranging from 0.2 to 50 Hz are considered as they cover a broad wavelength interval and aid in practice to investigate subsurface structures in the depth range from a few meters to a few hundreds of meters. Results show a marginal variation of 8 per cent at most for the fundamental frequency when a water layer is present. The water layer leads to variations in H/V peak amplitude of up to 50 per cent atop the solid layers.}, language = {en} } @misc{BeisnerGrossartGasol2019, author = {Beisner, Beatrix E. and Grossart, Hans-Peter and Gasol, Josep M.}, title = {A guide to methods for estimating phago-mixotrophy in nanophytoplankton}, series = {Journal of plankton research}, volume = {41}, journal = {Journal of plankton research}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0142-7873}, doi = {10.1093/plankt/fbz008}, pages = {77 -- 89}, year = {2019}, abstract = {Growing attention to phytoplankton mixotrophy as a trophic strategy has led to significant revisions of traditional pelagic food web models and ecosystem functioning. Although some empirical estimates of mixotrophy do exist, a much broader set of in situ measurements are required to (i) identify which organisms are acting as mixotrophs in real time and to (ii) assess the contribution of their heterotrophy to biogeochemical cycling. Estimates are needed through time and across space to evaluate which environmental conditions or habitats favour mixotrophy: conditions still largely unknown. We review methodologies currently available to plankton ecologists to undertake estimates of plankton mixotrophy, in particular nanophytoplankton phago-mixotrophy. Methods are based largely on fluorescent or isotopic tracers, but also take advantage of genomics to identify phylotypes and function. We also suggest novel methods on the cusp of use for phago-mixotrophy assessment, including single-cell measurements improving our capacity to estimate mixotrophic activity and rates in wild plankton communities down to the single-cell level. Future methods will benefit from advances in nanotechnology, micromanipulation and microscopy combined with stable isotope and genomic methodologies. Improved estimates of mixotrophy will enable more reliable models to predict changes in food web structure and biogeochemical flows in a rapidly changing world.}, language = {en} } @article{SchefflerImmenhauserPourteauetal.2019, author = {Scheffler, Franziska and Immenhauser, Adrian and Pourteau, Amaury and Natalicchio, Marcello and Candan, Osman and Oberh{\"a}nsli, Roland}, title = {A lost Tethyan evaporitic basin}, series = {Sedimentology : the journal of the International Association of Sedimentologists}, volume = {66}, journal = {Sedimentology : the journal of the International Association of Sedimentologists}, number = {7}, publisher = {Wiley}, address = {Hoboken}, issn = {0037-0746}, doi = {10.1111/sed.12606}, pages = {2627 -- 2660}, year = {2019}, abstract = {Ancient evaporite deposits are geological archives of depositional environments characterized by a long-term negative precipitation balance and bear evidence for global ocean element mass balance calculations. Here, Cretaceous selenite pseudomorphs from western Anatolia ('Rosetta Marble') — characterized by their exceptional morphological preservation — and their 'marine' geochemical signatures are described and interpreted in a process-oriented context. These rocks recorded Late Cretaceous high-pressure/low-temperature, subduction-related metamorphism with peak conditions of 1·0 to 1·2 GPa and 300 to 400°C. Metre-scale, rock-forming radiating rods, now present as fibrous calcite marble, clearly point to selenitic gypsum as the precursor mineral. Stratigraphic successions are recorded along a reconstructed proximal to distal transect. The cyclical alternation of selenite beds and radiolarian ribbon-bedded cherts in the distal portions are interpreted as a two type of seawater system. During arid intervals, shallow marine brines cascaded downward into basinal settings and induced precipitation. During more humid times, upwelling-induced radiolarian blooms caused the deposition of radiolarite facies. Interestingly, there is no comparable depositional setting known from the Cenozoic world. Meta-selenite geochemical data (δ13C, δ18O and 87Sr/86Sr) plot within the range of reconstructed middle Cretaceous seawater signatures. Possible sources for the 13C-enriched (mean 2·2 per mille) values include methanogenesis, gas hydrates and cold seep fluid exhalation. Spatially resolved component-specific analysis of a rock slab displays isotopic variances between meta-selenite crystals (mean δ13C 2·2 per mille) and host matrix (mean δ13C 1·3 per mille). The Cretaceous evaporite-pseudomorphs of Anatolia represent a basin wide event coeval with the Aptian evaporites of the Proto-Atlantic and the pseudomorphs share many attributes, including lateral distribution of 600 km and stratigraphic thickness of 1·5 to 2·0 km, with the evaporites formed during the younger Messinian salinity crisis. The Rosetta Marble of Anatolia may represent the best-preserved selenite pseudomorphs worldwide and have a clear potential to act as a template for the study of meta-selenite in deep time.}, language = {en} } @article{OzturkMalikCheungetal.2019, author = {Ozturk, Ugur and Malik, Nishant and Cheung, Kevin and Marwan, Norbert and Kurths, J{\"u}rgen}, title = {A network-based comparative study of extreme tropical and frontal storm rainfall over Japan}, series = {Climate dynamics : observational, theoretical and computational research on the climate system}, volume = {53}, journal = {Climate dynamics : observational, theoretical and computational research on the climate system}, number = {1-2}, publisher = {Springer}, address = {New York}, issn = {0930-7575}, doi = {10.1007/s00382-018-4597-1}, pages = {521 -- 532}, year = {2019}, abstract = {Frequent and intense rainfall events demand innovative techniques to better predict the extreme rainfall dynamics. This task requires essentially the assessment of the basic types of atmospheric processes that trigger extreme rainfall, and then to examine the differences between those processes, which may help to identify key patterns to improve predictive algorithms. We employ tools from network theory to compare the spatial features of extreme rainfall over the Japanese archipelago and surrounding areas caused by two atmospheric processes: the Baiu front, which occurs mainly in June and July (JJ), and the tropical storms from August to November (ASON). We infer from complex networks of satellite-derived rainfall data, which are based on the nonlinear correlation measure of event synchronization. We compare the spatial scales involved in both systems and identify different regions which receive rainfall due to the large spatial scale of the Baiu and tropical storm systems. We observed that the spatial scales involved in the Baiu driven rainfall extremes, including the synoptic processes behind the frontal development, are larger than tropical storms, which even have long tracks during extratropical transitions. We further delineate regions of coherent rainfall during the two seasons based on network communities, identifying the horizontal (east-west) rainfall bands during JJ over the Japanese archipelago, while during ASON these bands align with the island arc of Japan.}, language = {en} }