@misc{NguyenWangRychkovetal.2019, author = {Nguyen, Quyet Doan and Wang, Jingwen and Rychkov, Dmitry and Gerhard, Reimund}, title = {Depth Profile and Transport of Positive and Negative Charge in Surface (2-D) and Bulk (3-D) Nanocomposite Films}, series = {2nd International Conference on Electrical Materials and Power Equipment (ICEMPE 2019)}, journal = {2nd International Conference on Electrical Materials and Power Equipment (ICEMPE 2019)}, publisher = {IEEE}, address = {New York}, isbn = {978-1-5386-8434-4}, doi = {10.1109/ICEMPE.2019.8727256}, pages = {298 -- 300}, year = {2019}, abstract = {In the present study, the charge distribution and the charge transport across the thickness of 2- and 3-dimensional polymer nanodielectrics was investigated. Chemically surface-treated polypropylene (PP) films and low-density polyethylene nanocomposite films with 3 wt \% of magnesium oxide (LDPE/MgO) served as examples of 2-D and 3-D nanodielectrics, respectively. Surface charges were deposited onto the non-metallized surfaces of the one-side metallized polymer films and found to broaden and to thus enter the bulk of the films upon thermal stimulation at suitable elevated temperatures. The resulting space-charge profiles in the thickness direction were probed by means of Piezoelectrically-generated Pressure Steps (PPSs). It was observed that the chemical surface treatment of PP which led to the formation of nano-structures or the use of bulk nanoparticles from LDPE/MgO nanocomposites enhance charge trapping on or in the respective polymer films and also reduce charge transport inside the respective samples.}, language = {en} } @misc{Gerhard2019, author = {Gerhard, Reimund}, title = {Dielectric materials for electro-active (electret) and/or electro-passive (insulation) applications}, series = {2nd International Conference on Electrical Materials and Power Equipment (ICEMPE 2019)}, journal = {2nd International Conference on Electrical Materials and Power Equipment (ICEMPE 2019)}, publisher = {IEEE}, address = {New York}, isbn = {978-1-5386-8434-4}, doi = {10.1109/ICEMPE.2019.8727276}, pages = {91 -- 96}, year = {2019}, abstract = {Dielectric materials for electret applications usually have to contain a quasi-permanent space charge or dipole polarization that is stable over large temperature ranges and time periods. For electrical-insulation applications, on the other hand, a quasi-permanent space charge or dipole polarization is usually considered detrimental. In recent years, however, with the advent of high-voltage direct-current (HVDC) transmission and high-voltage capacitors for energy storage, new possibilities are being explored in the area of high-voltage dielectrics. Stable charge trapping (as e.g. found in nano-dielectrics) or large dipole polarizations (as e.g. found in relaxor ferroelectrics and high-permittivity dielectrics) are no longer considered to be necessarily detrimental in electrical-insulation materials. On the other hand, recent developments in electro-electrets (dielectric elastomers), i.e. very soft dielectrics with large actuation strains and high breakdown fields, and in ferroelectrets, i.e. polymers with electrically charged cavities, have resulted in new electret materials that may also be useful for HVDC insulation systems. Furthermore, 2-dimensional (nano-particles on surfaces or interfaces) and 3-dimensional (nano-particles in the bulk) nano-dielectrics have been found to provide very good charge-trapping properties that may not only be used for more stable electrets and ferroelectrets, but also for better HVDC electrical-insulation materials with the possibility to optimize charge-transport and field-gradient behavior. In view of these and other recent developments, a first attempt will be made to review a small selection of electro-active (i.e. electret) and electro-passive (i.e. insulation) dielectrics in direct comparison. Such a comparative approach may lead to synergies in materials concepts and research methods that will benefit both areas. Furthermore, electrets may be very useful for sensing and monitoring applications in electrical-insulation systems, while high-voltage technology is essential for more efficient charging and poling of electret materials.}, language = {en} } @article{RamanVenkatesanGulyakovaFruebingetal.2019, author = {Raman Venkatesan, Thulasinath and Gulyakova, Anna A. and Fr{\"u}bing, Peter and Gerhard, Reimund}, title = {Electrical polarization phenomena, dielectric relaxations and structural transitions in a relaxor-ferroelectric terpolymer investigated with electrical probing techniques}, series = {Materials research express}, volume = {6}, journal = {Materials research express}, number = {12}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {2053-1591}, doi = {10.1088/2053-1591/ab5352}, pages = {7}, year = {2019}, abstract = {Dielectric Relaxation Spectroscopy (DRS) and Thermally Stimulated Depolarization Current (TSDC) measurements were employed to study dielectric-relaxation processes, structural transitions and electric-polarization phenomena in poly(vinylidenefluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)) terpolymer films. Results from DRS confirm the existence of two separate dispersion regions related to a para-to-ferroelectric phase transition and to the glass transition. The dipolar TSDC peak correlates with the loss peak of the ? relaxation that represents the glass transition. The electric polarization calculated from the dipolar TSDC peak (glass transition) shows a non-linear electric-field dependence and saturates at high electric poling fields. As the observed behaviour is essentially the same as that of the electric polarization obtained from direct polarization-versus-electric-field hysteresis measurements, TSDC experiments are also suitable for studying the polarization in relaxor-ferroelectric polymers. A saturation polarization of 44 mC m(?2) was found for an electric field of 190 MV m(?1).}, language = {en} } @misc{GerhardKaltenbrunner2019, author = {Gerhard, Reimund and Kaltenbrunner, Martin}, title = {In Memoriam Siegfried Bauer}, series = {IEEE electrical insulation magazine}, volume = {35}, journal = {IEEE electrical insulation magazine}, number = {2}, publisher = {IEEE}, address = {Piscataway}, issn = {0883-7554}, doi = {10.1109/MEI.2019.8636175}, pages = {76 -- 78}, year = {2019}, abstract = {Siegfried Bauer, an internationally renowned, very creative applied physicist, who also was a prolific materials scientist and engineer, died on December 30, 2018, in Linz, Austria, after a one-year battle with cancer. He was full professor of soft-matter physics at the Johannes Kepler University Linz, Austria, and a scientific leader and innovator across the fields but mainly in the areas of electro-active materials (including electrets) and stretchable and imperceptible electronics.}, language = {en} } @misc{LouposDamigosTsertouetal.2019, author = {Loupos, Konstantinos and Damigos, Yannis and Tsertou, Athanasisa and Amditis, Angelos and Lenas, Sotiris-Angelos and Chatziandreoglou, Chistos and Malliou, Christina and Tsaoussidis, Vassilis and Gerhard, Reimund and Rychkov, Dmitry and Wirges, Werner and Frankenstein, Bernd and Camarinopoulos, Stephanos and Kalidromitis, Vassilis and Sanna, C. and Maier, Stephanos and Gordt, A. and Panetsos, P.}, title = {Innovative soft-material sensor, wireless network and assessment software for bridge life-cycle assessment}, series = {Life-cycle analysis and assessmanet in civil engineering : towards an integrated vision}, journal = {Life-cycle analysis and assessmanet in civil engineering : towards an integrated vision}, publisher = {CRC Press, Taylor \& Francis Group}, address = {Boca Raton}, isbn = {978-1-315-22891-4}, pages = {2085 -- 2092}, year = {2019}, abstract = {Nowadays, structural health monitoring of critical infrastructures is considered as of primal importance especially for managing transport infrastructure however most current SHM methodologies are based on point-sensors that show various limitations relating to their spatial positioning capabilities, cost of development and measurement range. This publication describes the progress in the SENSKIN EC co-funded research project that is developing a dielectric-elastomer sensor, formed from a large highly extensible capacitance sensing membrane and is supported by an advanced micro-electronic circuitry, for monitoring transport infrastructure bridges. The sensor under development provides spatial measurements of strain in excess of 10\%, while the sensing system is being designed to be easy to install, require low power in operation concepts, require simple signal processing, and have the ability to self-monitor and report. An appropriate wireless sensor network is also being designed and developed supported by local gateways for the required data collection and exploitation. SENSKIN also develops a Decision-Support-System (DSS) for proactive condition-based structural interventions under normal operating conditions and reactive emergency intervention following an extreme event. The latter is supported by a life-cycle-costing (LCC) and life-cycle-assessment (LCA) module responsible for the total internal and external costs for the identified bridge rehabilitation, analysis of options, yielding figures for the assessment of the economic implications of the bridge rehabilitation work and the environmental impacts of the bridge rehabilitation options and of the associated secondary effects respectively. The overall monitoring system will be evaluated and benchmarked on actual bridges of Egnatia Highway (Greece) and Bosporus Bridge (Turkey).}, language = {en} } @article{LiChenQiuetal.2019, author = {Li, Changsheng and Chen, Gangjin and Qiu, Xunlin and Gao, Meng and Gerhard, Reimund}, title = {Modified polytetrafluoroethylene}, series = {Applied physics express : APEX}, volume = {13}, journal = {Applied physics express : APEX}, number = {1}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1882-0778}, doi = {10.7567/1882-0786/ab5b23}, pages = {5}, year = {2019}, abstract = {Three poly(tetrafluoroethylene-hexafluoropropylene-vinylidenefluoride) (TFE-HFP-VDF or THV) terpolymers (Dyneon (R)) with different monomer ratios are investigated to demonstrate the concept of "modified" PTFE for space-charge electrets. HFP and VDF monomers distort the highly ordered PTFE molecules, which effectively enhances processability and adversely affects space-charge storage. Particularly, VDF component renders the material polar and probably also more conductive, partially undermining the space-charge-storage capabilities of PTFE. Nevertheless, the terpolymer THV815 with a TFE/HFP/VDF wt\% ratio of 76.1/10.9/13 combines easy processability and relatively good space-charge stability. Our results shed light on novel concepts for space-charge electret materials with enhanced processing properties and reasonable charge-storage capabilities.}, language = {en} }