@article{AlinaghiKruger2014, author = {Alinaghi, Alireza and Kruger, Frank}, title = {Seismic array analysis and redetermination of depths of earthquakes in Tien-Shan: implications for strength of the crust and lithosphere}, series = {Geophysical journal international}, volume = {198}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggu141}, pages = {1111 -- 1129}, year = {2014}, abstract = {We have redetermined focal depths of moderate and major earthquakes with reported lower-crust and upper-mantle depths that have occurred in Tien-Shan, since the availability of broad-band array data. Records of earthquakes at global arrays have been used for identification and modelling of depth phases in order to make accurate estimation of focal depths. Our results show that half of the purportedly deep earthquakes are indeed originating from depths attributable to middle-crust and lower-crust regions. Also one exceptional event in the northern foreland of Tien-Shan in Junggar Basin is located in the upper mantle at the depth of 64 km. Such unusually deep earthquakes for intraplate continental tectonic domain are all located at the margin of Tien-Shan with its adjacent stable blocks and at least some of them have occurred where the brittle behaviour of continental rocks is not highly expected. The reverse mechanisms of all these earthquakes and their proximity to formerly subducting and later colliding and underplating stable blocks and their interactions with overlying Tien-Shan are clues to explain this extremity.}, language = {en} } @article{BraeuerAschHofstetteretal.2012, author = {Braeuer, B. and Asch, G{\"u}nter and Hofstetter, Rami and Haberland, Christian and Jaser, Darweesh and El-Kelani, Radwan J.. and Weber, Michael H.}, title = {Microseismicity distribution in the southern Dead Sea basin and its implications on the structure of the basin}, series = {Geophysical journal international}, volume = {188}, journal = {Geophysical journal international}, number = {3}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2011.05318.x}, pages = {873 -- 878}, year = {2012}, abstract = {While the Dead Sea basin has been studied for a long time, the available knowledge about the detailed seismicity distribution in the area, as well as the deeper structure of the basin, is limited. Therefore, within the framework of the international project DESIRE (DEad Sea Integrated REsearch project), a dense temporary local seismological network was operated in the southern Dead Sea area. We use 530 local earthquakes, having all together 26 730 P- and S-arrival times for a simultaneous inversion of 1-D velocity models, station corrections and precise earthquake locations. Jackknife tests suggest an accuracy of the derived hypocentre locations of about 1 km. Thus, the result is the first clear image of the absolute distribution of the microseismicity of the area, especially in depth. The seismicity is concentrated in the upper crust down to 20 km depth while the lower limit of the seismicity is reached at 31 km depth. The seismic events at the eastern boundary fault (EBF) in the southern part of the study area represent the northward transform motion of the Arabian Plate along the Dead Sea Transform. North of the Boqeq fault the seismic activity represents the transfer of the motion in the pull-apart basin from the eastern to the western boundary. We find that from the surface downward the seismic events are tracing the boundary faults of the basin. The western boundary is mapped down to 12 km depth while the EBF reaches about 17 km depth, forming an asymmetric basin. One fifth of the data set is related to a specific cluster in time and space, which occurred in 2007 February at the western border fault. This cluster is aligned vertically, that is, it is perpendicular to the direction of the dominating left-lateral strike-slip movement at the main transform fault.}, language = {en} } @article{GhodsShabanianBergmanetal.2015, author = {Ghods, Abdolreza and Shabanian, Esmaeil and Bergman, Eric and Faridi, Mohammad and Donner, Stefanie and Mortezanejad, Gholamreza and Aziz-Zanjani, Asiyeh}, title = {The Varzaghan-Ahar, Iran, Earthquake Doublet (M-w 6.4, 6.2): implications for the geodynamics of northwest Iran}, series = {Geophysical journal international}, volume = {203}, journal = {Geophysical journal international}, number = {1}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggv306}, pages = {522 -- 540}, year = {2015}, abstract = {On 2012 August 11, a pair of large, damaging earthquakes struck the Varzaghan-Ahar region in northwest Iran, in a region where there was no major mapped fault or any well-documented historical seismicity. To investigate the active tectonics of the source region we applied a combination of seismological methods (local aftershock network, calibrated multiple event relocation and focal mechanism studies), field observations (structural geology and geomorphological) and inversions for the regional stress field. The epicentral region is north of the North Tabriz Fault. The first main shock is characterized by right-lateral strike-slip motion on an almost E-W fault plane of about 23 km length extending from the surface to a depth of about 14 km. The second main shock occurred on an ENE-striking fault that dips at 60-70A degrees to the NW. Independent inversions of focal mechanisms and geologically determined fault kinematic data for the active stress state yield a transpressional tectonic regime with sigma(1) oriented N132E. For the region northeast of the North Tabriz Fault, the presence of rigid lithosphere of the South Caspian Basin implies the kinematic adjustment by northward transferring of the contracted masses through both distributed deformation and structural deflections. Our results suggest that the kinematic adjustment inside a contracting wedge may occur along interacting crosswise or conjugate faults to accommodate low rates of internal deformation. At a global scale, our results indicate that despite the basic assumption of 'rigid blocks' in geodetic plate modelling, internal deformation of block-like regions could control the kinematics of deformation and the level of seismic hazard within and around such regions of low deformation rate.}, language = {en} } @article{GrigoliCescaAmorosoetal.2014, author = {Grigoli, Francesco and Cesca, Simone and Amoroso, Ortensia and Emolo, Antonio and Zollo, Aldo and Dahm, Torsten}, title = {Automated seismic event location by waveform coherence analysis}, series = {Geophysical journal international}, volume = {196}, journal = {Geophysical journal international}, number = {3}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggt477}, pages = {1742 -- 1753}, year = {2014}, abstract = {Automated location of seismic events is a very important task in microseismic monitoring operations as well for local and regional seismic monitoring. Since microseismic records are generally characterized by low signal-to-noise ratio, automated location methods are requested to be noise robust and sufficiently accurate. Most of the standard automated location routines are based on the automated picking, identification and association of the first arrivals of P and S waves and on the minimization of the residuals between theoretical and observed arrival times of the considered seismic phases. Although current methods can accurately pick P onsets, the automatic picking of the S onset is still problematic, especially when the P coda overlaps the S wave onset. In this paper, we propose a picking free earthquake location method based on the use of the short-term-average/long-term-average (STA/LTA) traces at different stations as observed data. For the P phases, we use the STA/LTA traces of the vertical energy function, whereas for the S phases, we use the STA/LTA traces of a second characteristic function, which is obtained using the principal component analysis technique. In order to locate the seismic event, we scan the space of possible hypocentral locations and origin times, and stack the STA/LTA traces along the theoretical arrival time surface for both P and S phases. Iterating this procedure on a 3-D grid, we retrieve a multidimensional matrix whose absolute maximum corresponds to the spatial coordinates of the seismic event. A pilot application was performed in the Campania-Lucania region (southern Italy) using a seismic network (Irpinia Seismic Network) with an aperture of about 150 km. We located 196 crustal earthquakes (depth < 20 km) with magnitude range 1.1 < M-L < 2.7. A subset of these locations were compared with accurate manual locations refined by using a double-difference technique. Our results indicate a good agreement with manual locations. Moreover, our method is noise robust and performs better than classical location methods based on the automatic picking of the P and S waves first arrivals.}, language = {en} } @article{HainzlZoellerBrietzkeetal.2013, author = {Hainzl, Sebastian and Z{\"o}ller, Gert and Brietzke, Gilbert B. and Hinzen, Klaus-G.}, title = {Comparison of deterministic and stochastic earthquake simulators for fault interactions in the Lower Rhine Embayment, Germany}, series = {Geophysical journal international}, volume = {195}, journal = {Geophysical journal international}, number = {1}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggt271}, pages = {684 -- 694}, year = {2013}, abstract = {Time-dependent probabilistic seismic hazard assessment requires a stochastic description of earthquake occurrences. While short-term seismicity models are well-constrained by observations, the recurrences of characteristic on-fault earthquakes are only derived from theoretical considerations, uncertain palaeo-events or proxy data. Despite the involved uncertainties and complexity, simple statistical models for a quasi-period recurrence of on-fault events are implemented in seismic hazard assessments. To test the applicability of statistical models, such as the Brownian relaxation oscillator or the stress release model, we perform a systematic comparison with deterministic simulations based on rate- and state-dependent friction, high-resolution representations of fault systems and quasi-dynamic rupture propagation. For the specific fault network of the Lower Rhine Embayment, Germany, we run both stochastic and deterministic model simulations based on the same fault geometries and stress interactions. Our results indicate that the stochastic simulators are able to reproduce the first-order characteristics of the major earthquakes on isolated faults as well as for coupled faults with moderate stress interactions. However, we find that all tested statistical models fail to reproduce the characteristics of strongly coupled faults, because multisegment rupturing resulting from a spatiotemporally correlated stress field is underestimated in the stochastic simulators. Our results suggest that stochastic models have to be extended by multirupture probability distributions to provide more reliable results.}, language = {en} } @article{HendriyanaBauerMuksinetal.2018, author = {Hendriyana, Andri and Bauer, Klaus and Muksin, Umar and Weber, Michael}, title = {AIC-based diffraction stacking for local earthquake locations at the Sumatran Fault (Indonesia)}, series = {Geophysical journal international}, volume = {213}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggy045}, pages = {952 -- 962}, year = {2018}, abstract = {We present a new workflow for the localization of seismic events which is based on a diffraction stacking approach. In order to address the effects from complex source radiation patterns, we suggest to compute diffraction stacking from a characteristic function (CF) instead of stacking the original waveform data. A new CF, which is called in the following mAIC (modified from Akaike Information Criterion) is proposed. We demonstrate that both P- and S-wave onsets can be detected accurately. To avoid cross-talk between P and S waves due to inaccurate velocity models, we separate the P and S waves from the mAIC function by making use of polarization attributes. Then, the final image function is represented by the largest eigenvalue as a result of the covariance analysis between P-and S-image functions. Results from synthetic experiments show that the proposed diffraction stacking provides reliable results. The workflow of the diffraction stacking method was finally applied to local earthquake data from Sumatra, Indonesia. Recordings from a temporary network of 42 stations deployed for nine months around the Tarutung pull-apart basin were analysed. The seismic event locations resulting from the diffraction stacking method align along a segment of the Sumatran Fault. A more complex distribution of seismicity is imaged within and around the Tarutung basin. Two lineaments striking N-S were found in the centre of the Tarutung basin which support independent results from structural geology.}, language = {en} } @article{JamalreyhaniRezapourCescaetal.2022, author = {Jamalreyhani, Mohammadreza and Rezapour, Mehdi and Cesca, Simone and Dahm, Torsten and Heimann, Sebastian and Sudhaus, Henriette and Isken, Marius Paul}, title = {Insight into the 2017-2019 Lurestan arc seismic sequence (Zagros, Iran); complex earthquake interaction in the basement and sediments}, series = {Geophysical journal international}, volume = {230}, journal = {Geophysical journal international}, number = {1}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggac057}, pages = {114 -- 130}, year = {2022}, abstract = {Despite its high-seismogenic potential, the details of the seismogenic processes of Zagros Simply Folded Belt (SFB) remains debated. Three large earthquakes (M-w 7.3, 5.9 and 6.3) struck in the Lurestan arc of the Zagros SFB in 2017 and 2018. The sequence was recorded by seismic stations at regional, and teleseismic distances. Coseismic surface displacements, measured by Sentinel-1A/B satellites, provide additional data and a unique opportunity to study these earthquakes in detail. Here, we complement previous studies of the coseismic slip distribution of the 12 November 2017 M-w 7.3 Ezgeleh earthquake by a detailed analysis of its aftershocks, and we analysed the rupture process of the two interrelated earthquakes (25 August 2018 M-w 5.9 Tazehabad and the 25 November 2018 M-w 6.3 Sarpol-e Zahab earthquakes). We model the surface displacements obtained from Interferometric Synthetic Aperture Radar (InSAR) measurements and seismic records. We conduct non-linear probabilistic optimizations based on joint InSAR and seismic data to obtain finite-fault rupture of these earthquakes. The Lurestan arc earthquakes were followed by a sustained aftershock activity, with 133 aftershocks exceeding M-n 4.0 until 30 December 2019. We rely on the permanent seismic networks of Iran and Iraq to relocate similar to 700 M-n 3 + events and estimate moment tensor solutions for 85 aftershocks down to M-w 4.0. The 2017 Ezgeleh earthquake has been considered to activate a low-angle (similar to 17 degrees) dextral-thrust fault at the depth of 10-20 km. However, most of its aftershocks have shallow centroid depths (8-12 km). The joint interpretation of finite source models, moment tensor and hypocentral location indicate that the 2018 Tazehabad and Sarpol-e Zahab earthquakes ruptured different strike-slip structures, providing evidence for the activation of the sinistral and dextral strike-slip faults, respectively. The deformation in the Lurestan arc is seismically accommodated by a complex fault system involving both thrust and strike-slip faults. Knowledge about the deformation characteristics is important for the understanding of crustal shortening, faulting and hazard and risk assessment in this region.}, language = {en} } @article{KruegerKulikovaLandgraf2018, author = {Kr{\"u}ger, Frank and Kulikova, Galina and Landgraf, Angela}, title = {Magnitudes for the historical 1885 (Belovodskoe), the 1887 (Verny) and the 1889 (Chilik) earthquakes in Central Asia determined from magnetogram recordings}, series = {Geophysical journal international}, volume = {215}, journal = {Geophysical journal international}, number = {3}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggy377}, pages = {1824 -- 1840}, year = {2018}, abstract = {Six large magnitude earthquakes in Central Asia which occurred at the end of the 19th century were recorded on early magnetographs in Great Britain. Scalar seismic moment estimates of the 1911 Chon-Kemin, the 1902 Atushi and the 1907 Karatag earthquakes in Central Asia were recently determined by historical seismogram modelling. For those events, we find agreement between moment magnitudes estimated from seismograms and from magnetograms. This supports the assumption of linear scaling of magnetogram amplitudes as function of M-0, which we then use to estimate the moment magnitudes for earlier large-magnitude events, that is, the 1885 Belovodskoe, 1887 Verny and 1889 Chilik earthquakes. The magnetometer data imply that the Chilik earthquake had M(W)7.9, slightly smaller than the Chon-Kemin event with M(W)8.0. The Verny earthquake, however, for which we estimate M(W)7.7, is likely larger than listed in catalogues (M7.3). Similarly, we find a larger magnitude M(W)7.6 (instead of the previous M6.9) for the Belovodskoe earthquake, but this remains uncertain due to measurement imprecision.}, language = {en} } @article{KulikovaKrueger2015, author = {Kulikova, Galina and Kr{\"u}ger, Frank}, title = {Source process of the 1911 M8.0 Chon-Kemin earthquake: investigation results by analogue seismic records}, series = {Geophysical journal international}, volume = {201}, journal = {Geophysical journal international}, number = {3}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggv091}, pages = {1891 -- 1911}, year = {2015}, abstract = {Several destructive earthquakes have occurred in Tien-Shan region at the beginning of 20th century. However, the detailed seismological characteristics, especially source parameters of those earthquakes are still poorly investigated. The Chon-Kemin earthquake is the strongest instrumentally recorded earthquake in the Tien-Shan region. This earthquake has produced an approximately 200 km long system of surface ruptures along Kemin-Chilik fault zone and killed about similar to 400 people. Several studies presented the different information on the earthquake epicentre location and magnitude, and two different focal mechanisms were also published. The reason for the limited knowledge of the source parameters for the Chon-Kemin earthquake is the complexity of old analogue records processing, digitization and analysis. In this study the data from 23 seismic stations worldwide were collected and digitized. The earthquake epicentre was relocated to 42.996NA degrees and 77.367EA degrees, the hypocentre depth is estimated between 10 and 20 km. The magnitude was recalculated to m(B) 8.05, M-s 7.94 and M-w 8.02. The focal mechanism, determined from amplitude ratios comparison of the observed and synthetic seismograms, was: str = 264A degrees, dip = 52A degrees, rake = 98A degrees. The apparent source time duration was between similar to 45 and similar to 70 s, the maximum slip occurred 25 s after the beginning of the rupture. Two subevents were clearly detected from the waveforms with the scalar moment ratio between them of about 1/3, the third subevent was also detected with less certainty. Taking into account surface rupture information, the fault geometry model with three patches was proposed. Based on scaling relations we conclude that the total rupture length was between similar to 260 and 300 km and a maximum rupture width could reach similar to 70 km.}, language = {en} } @article{KulikovaSchurrKruegeretal.2016, author = {Kulikova, Galina and Schurr, Bernd and Kr{\"u}ger, Frank and Brzoska, Elisabeth and Heimann, Sebastian}, title = {Source parameters of the Sarez-Pamir earthquake of 1911 February 18}, series = {Geophysical journal international}, volume = {205}, journal = {Geophysical journal international}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggw069}, pages = {1086 -- 1098}, year = {2016}, abstract = {The Ms \&\#8764; 7.7 Sarez-Pamir earthquake of 1911 February 18 is the largest instrumentally recorded earthquake in the Pamir region. It triggered one of the largest landslides of the past century, building a giant natural dam and forming Lake Sarez. As for many strong earthquakes from that time, information about source parameters of the Sarez-Pamir earthquake is limited due to the sparse observations. Here, we present the analysis of analogue seismic records of the Sarez-Pamir earthquake. We have collected, scanned and digitized 26 seismic records from 13 stations worldwide to relocate the epicentre and determine the event's depth (\&\#8764;26 km) and magnitude (mB7.3 and Ms7.7). The unusually good quality of the digitized waveforms allowed their modelling, revealing an NE-striking sinistral strike-slip focal mechanism in accordance with regional tectonics. The shallow depth and magnitude (Mw7.3) of the earthquake were confirmed. Additionally, we investigated the possible contribution of the landslide to the waveforms and present an alternative source model assuming the landslide and earthquake occurred in close sequence.}, language = {en} }