@article{BlaserKruegerOhrnbergeretal.2010, author = {Blaser, Lilian and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank}, title = {Scaling relations of earthquake source parameter estimates with special focus on subduction environment}, issn = {0037-1106}, doi = {10.1785/0120100111}, year = {2010}, abstract = {Earthquake rupture length and width estimates are in demand in many seismological applications. Earthquake magnitude estimates are often available, whereas the geometrical extensions of the rupture fault mostly are lacking. Therefore, scaling relations are needed to derive length and width from magnitude. Most frequently used are the relationships of Wells and Coppersmith (1994) derived on the basis of a large dataset including all slip types with the exception of thrust faulting events in subduction environments. However, there are many applications dealing with earthquakes in subduction zones because of their high seismic and tsunamigenic potential. There are no well-established scaling relations for moment magnitude and length/width for subduction events. Within this study, we compiled a large database of source parameter estimates of 283 earthquakes. All focal mechanisms are represented, but special focus is set on (large) subduction zone events, in particular. Scaling relations were fitted with linear least-square as well as orthogonal regression and analyzed regarding the difference between continental and subduction zone/oceanic relationships. Additionally, the effect of technical progress in earthquake parameter estimation on scaling relations was tested as well as the influence of different fault mechanisms. For a given moment magnitude we found shorter but wider rupture areas of thrust events compared to Wells and Coppersmith (1994). The thrust event relationships for pure continental and pure subduction zone rupture areas were found to be almost identical. The scaling relations differ significantly for slip types. The exclusion of events prior to 1964 when the worldwide standard seismic network was established resulted in a remarkable effect on strike-slip scaling relations: the data do not show any saturation of rupture width of strike- slip earthquakes. Generally, rupture area seems to scale with mean slip independent of magnitude. The aspect ratio L/W, however, depends on moment and differs for each slip type.}, language = {en} } @article{BlaserOhrnbergerKruegeretal.2012, author = {Blaser, Lilian and Ohrnberger, Matthias and Kr{\"u}ger, Frank and Scherbaum, Frank}, title = {Probabilistic tsunami threat assessment of 10 recent earthquakes offshore Sumatra}, series = {Geophysical journal international}, volume = {188}, journal = {Geophysical journal international}, number = {3}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2011.05324.x}, pages = {1273 -- 1284}, year = {2012}, abstract = {Tsunami early warning (TEW) is a challenging task as a decision has to be made within few minutes on the basis of incomplete and error-prone data. Deterministic warning systems have difficulties in integrating and quantifying the intrinsic uncertainties. In contrast, probabilistic approaches provide a framework that handles uncertainties in a natural way. Recently, we have proposed a method using Bayesian networks (BNs) that takes into account the uncertainties of seismic source parameter estimates in TEW. In this follow-up study, the method is applied to 10 recent large earthquakes offshore Sumatra and tested for its performance. We have evaluated both the general model performance given the best knowledge we have today about the source parameters of the 10 events and the corresponding response on seismic source information evaluated in real-time. We find that the resulting site-specific warning level probabilities represent well the available tsunami wave measurements and observations. Difficulties occur in the real-time tsunami assessment if the moment magnitude estimate is severely over- or underestimated. In general, the probabilistic analysis reveals a considerably large range of uncertainties in the near-field TEW. By quantifying the uncertainties the BN analysis provides important additional information to a decision maker in a warning centre to deal with the complexity in TEW and to reason under uncertainty.}, language = {en} } @article{BrechnerKlingeKruegeretal.1998, author = {Brechner, Stefan and Klinge, Klaus and Kr{\"u}ger, Frank and Plenefisch, Thomas}, title = {Backazimuthal variations of splitting parameters of teleseismic SKS phases observed at the broadband stations in Germany}, year = {1998}, language = {en} } @article{CzubaGradMjeldeetal.2011, author = {Czuba, Wojciech and Grad, Marek and Mjelde, Rolf and Guterch, Aleksander and Libak, Audun and Kr{\"u}ger, Frank and Murai, Yoshio and Schweitzer, Johannes}, title = {Continent-ocean-transition across a trans-tensional margin segment: off Bear Island, Barents Sea}, series = {Geophysical journal international}, volume = {184}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, organization = {IPY Project Grp}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2010.04873.x}, pages = {541 -- 554}, year = {2011}, abstract = {P>A 410 km long Ocean Bottom Seismometer profile spanning from the Bear Island, Barents Sea to oceanic crust formed along the Mohns Ridge has been modelled by use of ray-tracing with regard to observed P-waves. The northeastern part of the model represents typical continental crust, thinned from ca. 30 km thickness beneath the Bear Island to ca. 13 km within the Continent-Ocean-Transition. Between the Hornsund FZ and the Kn circle divide legga Fault, a 3-4 km thick sedimentary basin, dominantly of Permian/Carboniferous age, is modelled beneath the ca. 1.5 km thick layer of volcanics (Vestbakken Volcanic Province). The P-wave velocity in the 3-4 km thick lowermost continental crust is significantly higher than normal (ca. 7.5 km s-1). We interpret this layer as a mixture of mafic intrusions and continental crystalline blocks, dominantly related to the Paleocene-Early Eocene rifting event. The crystalline portion of the crust within the south-western part of the COT consists of a ca. 30 km wide and ca. 6 km thick high-velocity (7.3 km s-1) body. We interpret the body as a ridge of serpentinized peridotites. The magmatic portion of the ocean crust accreted along the Knipovich Ridge from continental break-up at ca. 35 Ma until ca. 20 Ma is 3-5 km thicker than normal. We interpret the increased magmatism as a passive response to the bending of this southernmost part of the Knipovich Ridge. The thickness of the magmatic portion of the crust formed along the Mohns Ridge at ca. 20 Ma decreases to ca. 3 km, which is normal for ultra slow spreading ridges.}, language = {en} } @article{DahmCescaHainzletal.2015, author = {Dahm, Torsten and Cesca, Simone and Hainzl, Sebastian and Braun, Thomas and Kr{\"u}ger, Frank}, title = {Discrimination between induced, triggered, and natural earthquakes close to hydrocarbon reservoirs: A probabilistic approach based on the modeling of depletion-induced stress changes and seismological source parameters}, series = {Journal of geophysical research : Solid earth}, volume = {120}, journal = {Journal of geophysical research : Solid earth}, number = {4}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9313}, doi = {10.1002/2014JB011778}, pages = {2491 -- 2509}, year = {2015}, abstract = {Earthquakes occurring close to hydrocarbon fields under production are often under critical view of being induced or triggered. However, clear and testable rules to discriminate the different events have rarely been developed and tested. The unresolved scientific problem may lead to lengthy public disputes with unpredictable impact on the local acceptance of the exploitation and field operations. We propose a quantitative approach to discriminate induced, triggered, and natural earthquakes, which is based on testable input parameters. Maxima of occurrence probabilities are compared for the cases under question, and a single probability of being triggered or induced is reported. The uncertainties of earthquake location and other input parameters are considered in terms of the integration over probability density functions. The probability that events have been human triggered/induced is derived from the modeling of Coulomb stress changes and a rate and state-dependent seismicity model. In our case a 3-D boundary element method has been adapted for the nuclei of strain approach to estimate the stress changes outside the reservoir, which are related to pore pressure changes in the field formation. The predicted rate of natural earthquakes is either derived from the background seismicity or, in case of rare events, from an estimate of the tectonic stress rate. Instrumentally derived seismological information on the event location, source mechanism, and the size of the rupture plane is of advantage for the method. If the rupture plane has been estimated, the discrimination between induced or only triggered events is theoretically possible if probability functions are convolved with a rupture fault filter. We apply the approach to three recent main shock events: (1) the M-w 4.3 Ekofisk 2001, North Sea, earthquake close to the Ekofisk oil field; (2) the M-w 4.4 Rotenburg 2004, Northern Germany, earthquake in the vicinity of the Sohlingen gas field; and (3) the M-w 6.1 Emilia 2012, Northern Italy, earthquake in the vicinity of a hydrocarbon reservoir. The three test cases cover the complete range of possible causes: clearly human induced, not even human triggered, and a third case in between both extremes.}, language = {en} } @article{DahmKruegerEssenetal.2005, author = {Dahm, Torsten and Kr{\"u}ger, Frank and Essen, Heinz-Hermann and Hensch, Martin}, title = {Historic microseismic data and their relation to the wave-climate in the North Atlantic}, year = {2005}, abstract = {Microseismic data from observatories in Europe, which have been continuously recorded since about 100 years, contain information on the wave-climate in the North Atlantic. They can potentially be used as additional constraints in high-resolution temporal and spatial reconstructions of the storminess and oceanic waveheights in the past. To resolve spatial patterns data from observatories in different regions are needed. While previous recent studies analyzed only few observatory archives and relatively short time ranges, this is a first attempt to process the whole available data archive from different observatories. We correct and compare smoothed microseismic data from different stations and discuss their correlation and possible use for studies of storminess variability. Microseismic amplitudes at four seismic stations in northern Europe show amplitude peaks in 1920 and 1925, a slow decline in amplitudes till the middle of the 1930's followed by a steady increase of amplitudes till about 1990. From 1990 on microseismic amplitudes decrease. We find a good correlation between the average surface wind velocity in the North Atlantic and microseismic amplitudes at inland stations far away from the coast. Coastal stations are more influenced by local swell and are thus potentially useful to recover regional changes in wind and ocean wavefields with time. The study demonstrates that the analysis of microseismic has the potential to assess climate changes during the last 100 years}, language = {en} } @article{DonnerKruegerRoessleretal.2014, author = {Donner, Stefanie and Kr{\"u}ger, Frank and Roessler, Dirk and Ghods, Abdolreza}, title = {Combined Inversion of broadband and short-period waveform data for regional moment tensors: A case study in the Alborz Mountains, Iran}, series = {Bulletin of the Seismological Society of America}, volume = {104}, journal = {Bulletin of the Seismological Society of America}, number = {3}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120130229}, pages = {1358 -- 1373}, year = {2014}, abstract = {In this study, we suggest a novel approach for the retrieval of regional moment tensors for earthquakes with small to moderate magnitudes. The first modification is the combined inversion of broadband and short-period waveform data. The broadband waveforms are inverted in a frequency range suitable for surface waves, whereas for the short-period data a frequency range suitable for body waves is applied. The second modification is the use of first-motion body-wave polarities to select the most probable solution out of all solutions from inversion. To combine three different criteria for selecting the most probable solution (i.e., residual from inversion, double-couple content of solution, number of nonmatching first-motion body-wave polarities), the L2 norm is applied to the normalized parameters. We chose five earthquakes within the Alborz mountains, Iran, as a case study (3.1 <= M-w <= 4.1). In this area, several factors exacerbate the difficulty of performing inversion for moment tensors, for example, a heterogeneous station network and large azimuthal gaps. We have demonstrated that our approach supplies reliable moment tensors when inversion from broadband data alone fails. In one case, we successfully retrieved a stable solution from short-period waveform data alone. Thus, our approach enables successful determination of seismic moment tensors wherever a sparse network of broadband stations has thus far prevented it.}, language = {en} } @article{DonnerRoesslerKruegeretal.2013, author = {Donner, Stefanie and R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ghods, Abdolreza and Strecker, Manfred}, title = {Segmented seismicity of the M (w) 6.2 Baladeh earthquake sequence (Alborz Mountains, Iran) revealed from regional moment tensors}, series = {Journal of seismology}, volume = {17}, journal = {Journal of seismology}, number = {3}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-013-9362-7}, pages = {925 -- 959}, year = {2013}, abstract = {The M (w) 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M (w) a parts per thousand yen3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW-SE striking fault planes. The mainshock ruptured a 28A degrees south-dipping area of 24 x 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85A degrees towards the north.}, language = {en} } @article{EiblRosskopfSciottoetal.2022, author = {Eibl, Eva P. S. and Rosskopf, Martina and Sciotto, Mariangela and Currenti, Gilda and Di Grazia, Giuseppe and Jousset, Philippe and Kr{\"u}ger, Frank and Weber, Michael}, title = {Performance of a rotational sensor to decipher volcano seismic signals on Etna, Italy}, series = {Journal of geophysical research : Solid earth}, volume = {127}, journal = {Journal of geophysical research : Solid earth}, number = {6}, publisher = {Wiley}, address = {Hoboken, NJ}, issn = {0148-0227}, doi = {10.1029/2021JB023617}, pages = {22}, year = {2022}, abstract = {Volcano-seismic signals such as long-period events and tremor are important indicators for volcanic activity and unrest. However, their wavefield is complex and characterization and location using traditional seismological instrumentation is often difficult. In 2019 we recorded the full seismic wavefield using a newly developed 3C rotational sensor co-located with a 3C traditional seismometer on Etna, Italy. We compare the performance of the rotational sensor, the seismometer and the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) seismic network with respect to the analysis of complex volcano-seismic signals. We create event catalogs for volcano-tectonic (VT) and long-period (LP) events combining a STA/LTA algorithm and cross-correlations. The event detection based on the rotational sensor is as reliable as the seismometer-based detection. The LP events are dominated by SH-type waves. Derived SH phase velocities range from 500 to 1,000 m/s for LP events and 300-400 m/s for volcanic tremor. SH-waves compose the tremor during weak volcanic activity and SH- and SV-waves during sustained strombolian activity. We derive back azimuths using (a) horizontal rotational components and (b) vertical rotation rate and transverse acceleration. The estimated back azimuths are consistent with the INGV-OE event location for (a) VT events with an epicentral distance larger than 3 km and some closer events, (b) LP events and tremor in the main crater area. Measuring the full wavefield we can reliably analyze the back azimuths, phase velocities and wavefield composition for VT, LP events and tremor in regions that are difficult to access such as volcanoes.}, language = {en} } @article{FischerHrubcovaDahmetal.2022, author = {Fischer, Tomas and Hrubcova, Pavla and Dahm, Torsten and Woith, Heiko and Vylita, Tomas and Ohrnberger, Matthias and Vlcek, Josef and Horalek, Josef and Dedecek, Petr and Zimmer, Martin and Lipus, Martin P. and Pierdominici, Simona and Kallmeyer, Jens and Kr{\"u}ger, Frank and Hannemann, Katrin and Korn, Michael and K{\"a}mpf, Horst and Reinsch, Thomas and Klicpera, Jakub and Vollmer, Daniel and Daskalopoulou, Kyriaki}, title = {ICDP drilling of the Eger Rift observatory}, series = {Scientific Drilling}, volume = {31}, journal = {Scientific Drilling}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1816-8957}, doi = {10.5194/sd-31-31-2022}, pages = {31 -- 49}, year = {2022}, abstract = {The new in situ geodynamic laboratory established in the framework of the ICDP Eger project aims to develop the most modern, comprehensive, multiparameter laboratory at depth for studying earthquake swarms, crustal fluid flow, mantle-derived CO2 and helium degassing, and processes of the deep biosphere. In order to reach a new level of high-frequency, near-source and multiparameter observation of earthquake swarms and related phenomena, such a laboratory comprises a set of shallow boreholes with high-frequency 3-D seismic arrays as well as modern continuous real-time fluid monitoring at depth and the study of the deep biosphere. This laboratory is located in the western part of the Eger Rift at the border of the Czech Republic and Germany (in the West Bohemia-Vogtland geodynamic region) and comprises a set of five boreholes around the seismoactive zone. To date, all monitoring boreholes have been drilled. This includes the seismic monitoring boreholes S1, S2 and S3 in the crystalline units north and east of the major Novy Kostel seismogenic zone, borehole F3 in the Hartousov mofette field and borehole S4 in the newly discovered Bazina maar near Liba. Supplementary borehole P1 is being prepared in the Neualbenreuth maar for paleoclimate and biological research. At each of these sites, a borehole broadband seismometer will be installed, and sites S1, S2 and S3 will also host a 3-D seismic array composed of a vertical geophone chain and surface seismic array. Seismic instrumenting has been completed in the S1 borehole and is in preparation in the remaining four monitoring boreholes. The continuous fluid monitoring site of Hartousov includes three boreholes, F1, F2 and F3, and a pilot monitoring phase is underway. The laboratory also enables one to analyze microbial activity at CO2 mofettes and maar structures in the context of changes in habitats. The drillings into the maar volcanoes contribute to a better understanding of the Quaternary paleoclimate and volcanic activity.}, language = {en} }