@article{AstSchwarzeMuelleretal.2013,
  author    = {Ast, Sandra and Schwarze, Thomas and M{\"u}ller, Holger and Sukhanov, Aleksey and Michaelis, Stefanie and Wegener, Joachim and Wolfbeis, Otto S. and K{\"o}rzd{\"o}rfer, Thomas and D{\"u}rkop, Axel and Holdt, Hans-J{\"u}rgen},
  title     = {A highly K+-Selective Phenylaza-[18]crown-6-Lariat-Ether-Based Fluoroionophore and its application in the sensing of K+ Ions with an optical sensor film and in cells},
  series = {Chemistry - a European journal},
  volume    = {19},
  journal   = {Chemistry - a European journal},
  number    = {44},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201302350},
  pages     = {14911 -- 14917},
  year      = {2013},
  abstract  = {Herein, we report the synthesis of two phenylaza-[18]crown-6 lariat ethers with a coumarin fluorophore (1 and 2) and we reveal that compound 1 is an excellent probe for K+ ions under simulated physiological conditions. The presence of a 2-methoxyethoxy lariat group at the ortho position of the anilino moiety is crucial to the substantially increased stability of compounds 1 and 2 over their lariat-free phenylaza-[18] crown-6 ether analogues. Probe 1 shows a high K+/Na+ selectivity and a 2.5-fold fluorescence enhancement was observed in the presence of 100 mm K+ ions. A fluorescent membrane sensor, which was prepared by incorporating probe 1 into a hydrogel, showed a fully reversible response, a response time of 150 s, and a signal change of 7.8\% per 1 mm K+ within the range 1-10 mm K+. The membrane was easily fabricated (only a single sensing layer on a solid polyester support), yet no leaching was observed. Moreover, compound 1 rapidly permeated into cells, was cytocompatible, and was suitable for the fluorescent imaging of K+ ions on both the extracellular and intracellular levels.},
  language  = {en}
}
@misc{BeisnerGrossartGasol2019,
  author    = {Beisner, Beatrix E. and Grossart, Hans-Peter and Gasol, Josep M.},
  title     = {A guide to methods for estimating phago-mixotrophy in nanophytoplankton},
  series = {Journal of plankton research},
  volume    = {41},
  journal   = {Journal of plankton research},
  number    = {2},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0142-7873},
  doi       = {10.1093/plankt/fbz008},
  pages     = {77 -- 89},
  year      = {2019},
  abstract  = {Growing attention to phytoplankton mixotrophy as a trophic strategy has led to significant revisions of traditional pelagic food web models and ecosystem functioning. Although some empirical estimates of mixotrophy do exist, a much broader set of in situ measurements are required to (i) identify which organisms are acting as mixotrophs in real time and to (ii) assess the contribution of their heterotrophy to biogeochemical cycling. Estimates are needed through time and across space to evaluate which environmental conditions or habitats favour mixotrophy: conditions still largely unknown. We review methodologies currently available to plankton ecologists to undertake estimates of plankton mixotrophy, in particular nanophytoplankton phago-mixotrophy. Methods are based largely on fluorescent or isotopic tracers, but also take advantage of genomics to identify phylotypes and function. We also suggest novel methods on the cusp of use for phago-mixotrophy assessment, including single-cell measurements improving our capacity to estimate mixotrophic activity and rates in wild plankton communities down to the single-cell level. Future methods will benefit from advances in nanotechnology, micromanipulation and microscopy combined with stable isotope and genomic methodologies. Improved estimates of mixotrophy will enable more reliable models to predict changes in food web structure and biogeochemical flows in a rapidly changing world.},
  language  = {en}
}
@article{BroekerRoskeVallerianietal.2019,
  author    = {Broeker, Nina K. and Roske, Yvette and Valleriani, Angelo and Stephan, Mareike Sophia and Andres, Dorothee and Koetz, Joachim and Heinemann, Udo and Barbirz, Stefanie},
  title     = {Time-resolved DNA release from an O-antigen-specific Salmonella bacteriophage with a contractile tail},
  series = {The journal of biological chemistry},
  volume    = {294},
  journal   = {The journal of biological chemistry},
  number    = {31},
  publisher = {American Society for Biochemistry and Molecular Biology},
  address   = {Bethesda},
  issn      = {1083-351X},
  doi       = {10.1074/jbc.RA119.008133},
  pages     = {11751 -- 11761},
  year      = {2019},
  abstract  = {Myoviruses, bacteriophages with T4-like architecture, must contract their tails prior to DNA release. However, quantitative kinetic data on myovirus particle opening are lacking, although they are promising tools in bacteriophage-based antimicrobial strategies directed against Gram-negative hosts. For the first time, we show time-resolved DNA ejection from a bacteriophage with a contractile tail, the multi-O-antigen-specific Salmonella myovirus Det7. DNA release from Det7 was triggered by lipopolysaccharide (LPS) O-antigen receptors and notably slower than in noncontractile-tailed siphoviruses. Det7 showed two individual kinetic steps for tail contraction and particle opening. Our in vitro studies showed that highly specialized tailspike proteins (TSPs) are necessary to attach the particle to LPS. A P22-like TSP confers specificity for the Salmonella Typhimurium O-antigen. Moreover, crystal structure analysis at 1.63 angstrom resolution confirmed that Det7 recognized the Salmonella Anatum O-antigen via an E15-like TSP, DettilonTSP. DNA ejection triggered by LPS from either host showed similar velocities, so particle opening is thus a process independent of O-antigen composition and the recognizing TSP. In Det7, at permissive temperatures TSPs mediate O-antigen cleavage and couple cell surface binding with DNA ejection, but no irreversible adsorption occurred at low temperatures. This finding was in contrast to short-tailed Salmonella podoviruses, illustrating that tailed phages use common particle-opening mechanisms but have specialized into different infection niches.},
  language  = {en}
}
@article{DunsingPetrichChiantia2021,
  author    = {Dunsing, Valentin and Petrich, Annett and Chiantia, Salvatore},
  title     = {Multicolor fluorescence fluctuation spectroscopy in living cells via spectral detection},
  series = {eLife},
  volume    = {10},
  journal   = {eLife},
  publisher = {eLife Sciences Publications},
  address   = {Cambridge},
  issn      = {2050-084X},
  doi       = {10.7554/eLife.69687},
  pages     = {33},
  year      = {2021},
  abstract  = {Signaling pathways in biological systems rely on specific interactions between multiple biomolecules. Fluorescence fluctuation spectroscopy provides a powerful toolbox to quantify such interactions directly in living cells. Cross-correlation analysis of spectrally separated fluctuations provides information about intermolecular interactions but is usually limited to two fluorophore species. Here, we present scanning fluorescence spectral correlation spectroscopy (SFSCS), a versatile approach that can be implemented on commercial confocal microscopes, allowing the investigation of interactions between multiple protein species at the plasma membrane. We demonstrate that SFSCS enables cross-talk-free cross-correlation, diffusion, and oligomerization analysis of up to four protein species labeled with strongly overlapping fluorophores. As an example, we investigate the interactions of influenza A virus (IAV) matrix protein 2 with two cellular host factors simultaneously. We furthermore apply raster spectral image correlation spectroscopy for the simultaneous analysis of up to four species and determine the stoichiometry of ternary IAV polymerase complexes in the cell nucleus.},
  language  = {en}
}
@article{EerqingSubramanianRubioJimenezetal.2021,
  author    = {Eerqing, Narima and Subramanian, Sivaraman and Rubio Jimenez, Jesus and Lutz, Tobias and Wu, Hsin-Yu and Anders, Janet and Soeller, Christian and Vollmer, Frank},
  title     = {Comparing transient oligonucleotide hybridization kinetics using DNA-PAINT and optoplasmonic single-molecule sensing on gold nanorods},
  series = {ACS photonics / American Chemical Society},
  volume    = {8},
  journal   = {ACS photonics / American Chemical Society},
  number    = {10},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {2330-4022},
  doi       = {10.1021/acsphotonics.1c01179},
  pages     = {2882 -- 2888},
  year      = {2021},
  abstract  = {We report a comparison of two photonic techniques for single-molecule sensing: fluorescence nanoscopy and optoplasmonic sensing. As the test system, oligonucleotides with and without fluorescent labels are transiently hybridized to complementary "docking" strands attached to gold nanorods. Comparing the measured single-molecule kinetics helps to examine the influence of the fluorescent labels as well as factors arising from different sensing geometries. Our results demonstrate that DNA dissociation is not significantly altered by the fluorescent labels and that DNA association is affected by geometric factors in the two techniques. These findings open the door to exploiting plasmonic sensing and fluorescence nanoscopy in a complementary fashion, which will aid in building more powerful sensors and uncovering the intricate effects that influence the behavior of single molecules.},
  language  = {en}
}
@article{GuptaPathakShrivastav2022,
  author    = {Gupta, Banshi D. and Pathak, Anisha and Shrivastav, Anand},
  title     = {Optical Biomedical Diagnostics Using Lab-on-Fiber Technology},
  series = {Photonics : open access journal},
  volume    = {9},
  journal   = {Photonics : open access journal},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2304-6732},
  doi       = {10.3390/photonics9020086},
  pages     = {40},
  year      = {2022},
  abstract  = {Point-of-care and in-vivo bio-diagnostic tools are the current need for the present critical scenarios in the healthcare industry. The past few decades have seen a surge in research activities related to solving the challenges associated with precise on-site bio-sensing. Cutting-edge fiber optic technology enables the interaction of light with functionalized fiber surfaces at remote locations to develop a novel, miniaturized and cost-effective lab on fiber technology for bio-sensing applications. The recent remarkable developments in the field of nanotechnology provide innumerable functionalization methodologies to develop selective bio-recognition elements for label free biosensors. These exceptional methods may be easily integrated with fiber surfaces to provide highly selective light-matter interaction depending on various transduction mechanisms. In the present review, an overview of optical fiber-based biosensors has been provided with focus on physical principles used, along with the functionalization protocols for the detection of various biological analytes to diagnose the disease. The design and performance of these biosensors in terms of operating range, selectivity, response time and limit of detection have been discussed. In the concluding remarks, the challenges associated with these biosensors and the improvement required to develop handheld devices to enable direct target detection have been highlighted.},
  language  = {en}
}
@phdthesis{Jung2004,
  author    = {Jung, Carl Christoph},
  title     = {Lichtinduzierte Generierung und Charakterisierung optischer Anisotropie},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001390},
  school      = {Universit{\"a}t Potsdam},
  year      = {2004},
  abstract  = {Eine Nutzung der optischen Anisotropie d{\"u}nner Schichten ist vor allem f{\"u}r die Displaytechnologie, die optische Datenspeicherung und f{\"u}r optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen d{\"u}nnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden k{\"o}nnen wertvolle Beitr{\"a}ge f{\"u}r Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabh{\"a}ngigkeit von Fl{\"u}ssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von d{\"u}nneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, d{\"u}nneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch d{\"u}nneren Schichten mit Gewinn eingesetzt werden zu k{\"o}nnen. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in d{\"u}nnen Schichten von azobenzenhaltigen und zimts{\"a}urehaltigen, amorphen und fl{\"u}ssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur {\"A}nderung von lichtinduzierten, dreidimensionalen Anisotropien in d{\"u}nnen Schichten von azobenzenhaltigen und zimts{\"a}urehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgef{\"u}hrt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abh{\"a}ngig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten d{\"u}nneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in fl{\"u}ssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen.},
  language  = {de}
}
@book{Jung2004,
  author    = {Jung, Carl Christoph},
  title     = {Lichtinduzierte Generierung und Charakterisierung optischer Anisotropie. - [{\"u}berarb. Diss.]},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001501},
  publisher      = {Universit{\"a}t Potsdam},
  year      = {2004},
  abstract  = {Eine Nutzung der optischen Anisotropie d{\"u}nner Schichten ist vor allem f{\"u}r die Displaytechnologie, die optische Datenspeicherung und f{\"u}r optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen d{\"u}nnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden k{\"o}nnen wertvolle Beitr{\"a}ge f{\"u}r Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabh{\"a}ngigkeit von Fl{\"u}ssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von d{\"u}nneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, d{\"u}nneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch d{\"u}nneren Schichten mit Gewinn eingesetzt werden zu k{\"o}nnen. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in d{\"u}nnen Schichten von azobenzenhaltigen und zimts{\"a}urehaltigen, amorphen und fl{\"u}ssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur {\"A}nderung von lichtinduzierten, dreidimensionalen Anisotropien in d{\"u}nnen Schichten von azobenzenhaltigen und zimts{\"a}urehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgef{\"u}hrt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abh{\"a}ngig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten d{\"u}nneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in fl{\"u}ssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen.},
  language  = {de}
}
@phdthesis{Koelsch2014,
  author    = {K{\"o}lsch, Jonas David},
  title     = {Entwicklung neuer farbstoffmarkierter Polymere zur Visualisierung des LCST-Phasen{\"u}bergangs in w{\"a}ssriger L{\"o}sung},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72531},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 147},
  year      = {2014},
  abstract  = {Ziel der Arbeit war die Entwicklung von farbstoffmarkierten Polymeren, die einen temperaturgetriebenen Kn{\"a}uel-Kollaps-Phasen{\"u}bergang in w{\"a}ssriger L{\"o}sung ("thermo-responsive Polymere") zeigen und diesen in ein optisches Signal {\"u}bersetzen k{\"o}nnen. Solche Polymere unterliegen innerhalb eines kleinen Temperaturintervalls einer massiven {\"A}nderung ihres Verhaltens, z B. ihrer Konformation und ihres Quellungsgrads. Diese {\"A}nderungen sind mit einem Wechsel der L{\"o}seeigenschaften von hydrophil zu hydrophob verbunden. Als Matrixpolymere wurden Poly-N-isopropylacrylamid (polyNIPAm), Poly(oligoethylen-glykolacrylat) (polyOEGA) und Poly(oligoethylenglykolmethacrylat) (polyOEGMA) ein-gesetzt, in die geeignete Farbstoffen durch Copolymerisation eingebaut wurden. Als besonders geeignet, um den Phasen{\"u}bergang in ein optisches Signal zu {\"u}bersetzen, erwiesen sich hierf{\"u}r kompakte, solvatochrome Cumarin- und Naphthalimidderivate. Diese beeintr{\"a}chtigten weder das Polymerisationsverhalten noch den Phasen{\"u}bergang, reagierten aber sowohl bez{\"u}glich Farbe als auch Fluoreszenz stark auf die Polarit{\"a}t des L{\"o}semittels. Weiterhin wurden Systeme entwickelt, die mittels Energietransfer (FRET) ein an den Phasen{\"u}bergang gekoppeltes optisches Signal erzeugen. Hierbei wurde ein Cumarin als Donor- und ein Polythiophen als Akzeptorfarbstoff eingesetzt. Es zeigte sich, dass trotz scheinbarer {\"A}hnlichkeit bestimmte Polymere ausgepr{\"a}gt auf einen Temperaturstimulus mit {\"A}nderung ihrer spektralen Eigenschaften reagieren, andere aber nicht. Hierf{\"u}r wurden die molekularen Ursachen untersucht. Als wahrscheinliche Gr{\"u}nde f{\"u}r das Ausbleiben einer spektralen {\"A}nderung in Oligo(ethylenglykol)-basierten Polymeren sind zum einen die fehlende Dehydratationseffektivit{\"a}t infolge des Fehlens eines selbstgen{\"u}genden Wasserstoffbr{\"u}ckenbindungsmotivs zu nennen und zum anderen die sterische Abschirmung der Farbstoffe durch die Oligo(ethylenglykol)-Seitenketten. Als Prinzipbeweis f{\"u}r die N{\"u}tzlichkeit solcher Systeme f{\"u}r die Bioanalytik wurde ein System entwickelt, dass die L{\"o}slichkeitseigenschaft eines thermoresponsiven Polymers durch Antik{\"o}rper-Antigen-Reaktion {\"a}nderte. Die Bindung selbst kleiner Mengen eines Antik{\"o}rpers ließ sich so direkt optisch auslesen und war bereits mit dem bloßen Auge zu erkennen.},
  language  = {de}
}
@phdthesis{Meiling2017,
  author    = {Meiling, Till Thomas},
  title     = {Development of a reliable and environmentally friendly synthesis for fluorescence carbon nanodots},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-410160},
  school      = {Universit{\"a}t Potsdam},
  pages     = {198},
  year      = {2017},
  abstract  = {Carbon nanodots (CNDs) have generated considerable attention due to their promising properties, e.g. high water solubility, chemical inertness, resistance to photobleaching, high biocompatibility and ease of functionalization. These properties render them ideal for a wide range of functions, e.g. electrochemical applications, waste water treatment, (photo)catalysis, bio-imaging and bio-technology, as well as chemical sensing, and optoelectronic devices like LEDs. In particular, the ability to prepare CNDs from a wide range of accessible organic materials makes them a potential alternative for conventional organic dyes and semiconductor quantum dots (QDs) in various applications. However, current synthesis methods are typically expensive and depend on complex and time-consuming processes or severe synthesis conditions and toxic chemicals. One way to reduce overall preparation costs is the use of biological waste as starting material. Hence, natural carbon sources such as pomelo peal, egg white and egg yolk, orange juice, and even eggshells, to name a few; have been used for the preparation of CNDs. While the use of waste is desirable, especially to avoid competition with essential food production, most starting-materials lack the essential purity and structural homogeneity to obtain homogeneous carbon dots. Furthermore, most synthesis approaches reported to date require extensive purification steps and have resulted in carbon dots with heterogeneous photoluminescent properties and indefinite composition. For this reason, among others, the relationship between CND structure (e.g. size, edge shape, functional groups and overall composition) and photophysical properties is yet not fully understood. This is particularly true for carbon dots displaying selective luminescence (one of their most intriguing properties), i.e. their PL emission wavelength can be tuned by varying the excitation wavelength. In this work, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain CNDs with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch, carboxylic acids and Tris-EDTA (TE) buffer as carbon- and nitrogen source, respectively. The presented microwave-assisted hydrothermal precursor carbonization (MW-hPC) is characterized by its cost-efficiency, simplicity, short reaction times, low environmental footprint, and high yields of approx. 80\% (w/w). Furthermore, only a single synthesis step is necessary to obtain homogeneous water-soluble CNDs with no need for further purification. Depending on starting materials and reaction conditions different types of CNDs have been prepared. The as-prepared CNDs exhibit reproducible, highly homogeneous and favourable PL properties with narrow emission bands (approx. 70nm FWHM), are non-blinking, and are ready to use without need for further purification, modification or surface passivation agents. Furthermore, the CNDs are comparatively small (approx. 2.0nm to 2.4nm) with narrow size distributions; are stable over a long period of time (at least one year), either in solution or as a dried solid; and maintain their PL properties when re-dispersed in solution. Depending on CND type, the PL quantum yield (PLQY) can be adjusted from as low as 1\% to as high as 90\%; one of the highest reported PLQY values (for CNDs) so far. An essential part of this work was the utilization of a microwave synthesis reactor, allowing various batch sizes and precise control over reaction temperature and -time, pressure, and heating- and cooling rate, while also being safe to operate at elevated reaction conditions (e.g. 230 ±C and 30 bar). The hereby-achieved high sample throughput allowed, for the first time, the thorough investigation of a wide range of synthesis parameters, providing valuable insight into the CND formation. The influence of carbon- and nitrogen source, precursor concentration and -combination, reaction time and -temperature, batch size, and post-synthesis purification steps were carefully investigated regarding their influence on the optical properties of as-synthesized CNDs. In addition, the change in photophysical properties resulting from the conversion of CND solution into solid and back into the solution was investigated. Remarkably, upon freeze-drying the initial brown CND-solution turns into a non-fluorescent white/slightly yellow to brown solid which recovers PL in aqueous solution. Selected CND samples were also subject to EDX, FTIR, NMR, PL lifetime (TCSPC), particle size (TEM), TGA and XRD analysis. Besides structural characterization, the pH- and excitation dependent PL characteristics (i.e. selective luminescence) were examined; giving inside into the origin of photophysical properties and excitation dependent behaviour of CNDs. The obtained results support the notion that for CNDs the nature of the surface states determines the PL properties and that excitation dependent behaviour is caused by the "Giant Red-Edge Excitation Shift" (GREES).},
  language  = {en}
}